RDMA/rxe: Fix ib_device reference counting (again)
Subsystems (2)
PATCH 1/1 RDMA/rxe: Fix ib_device reference counting (again)
Three errors occurred in the fix referenced below.
1) The on and off again 'if (skb)' got dropped but was really needed in rxe_rcv_mcast_pkt() to prevent calling ib_device_put() on the non-error path.
2) Extending the reference taken by rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed was not matched by a reference in the loopback path resulting in underflows.
3) In rxe_comp.c the function free_pkt() did not clear skb which triggered a warning at done: and could possibly at exit: in rxe_completer(). The WARN_ONCE() calls are not required at done:
and only in one place before going to exit.
This patch fixes these errors.
--- drivers/infiniband/sw/rxe/rxe_comp.c | 5 +++-- drivers/infiniband/sw/rxe/rxe_net.c | 7 ++++++- drivers/infiniband/sw/rxe/rxe_recv.c | 6 ++++-- 3 files changed, 13 insertions(+), 5 deletions(-)
drivers/infiniband/sw/rxe/rxe_comp.c +3 -2
@@ -671,6 +671,9 @@ int rxe_completer(void *arg)* it down the road or let it expire */ +/* warn if we did receive a packet */ +WARN_ON_ONCE (skb); +/* there is nothing to retry in this case */ if (!wqe || (wqe->state == wqe_state_posted)) goto exit;
@@ -750,7 +753,6 @@ int rxe_completer(void *arg)/* we come here if we are done with processing and want the task to * exit from the loop calling us */ -WARN_ON_ONCE (skb);rxe_drop_ref (qp);return -EAGAIN ;
@@ -758,7 +760,6 @@ int rxe_completer(void *arg)/* we come here if we have processed a packet we want the task to call * us again to see if there is anything else to do */ -WARN_ON_ONCE (skb);rxe_drop_ref (qp);return 0 ; }
drivers/infiniband/sw/rxe/rxe_net.c +6 -1
@@ -406,12 +406,17 @@ int rxe_send(struct rxe_pkt_info *pkt, struct sk_buff *skb)void rxe_loopback (struct sk_buff *skb) { +struct rxe_pkt_info *pkt =SKB_TO_PKT (skb); +if (skb->protocol ==htons (ETH_P_IP ))skb_pull (skb,sizeof (struct iphdr ));else skb_pull (skb,sizeof (struct ipv6hdr )); -rxe_rcv (skb); +if (WARN_ON (!ib_device_try_get (&pkt->rxe->ib_dev))) +kfree_skb (skb); +else +rxe_rcv (skb); } struct sk_buff *rxe_init_packet(struct rxe_dev *rxe, struct rxe_av *av,
drivers/infiniband/sw/rxe/rxe_recv.c +4 -2
@@ -299,8 +299,10 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb) err1:/* free skb if not consumed */ -kfree_skb (skb); -ib_device_put (&rxe->ib_dev); +if (unlikely (skb)) { +kfree_skb (skb); +ib_device_put (&rxe->ib_dev); + } }/**
Signature · 1 line
2.27.0
Zhu Yanjun
maintainerQuoted 84 lines · Bob Pearson
Three errors occurred in the fix referenced below.
1) The on and off again 'if (skb)' got dropped but was really needed in
rxe_rcv_mcast_pkt()to prevent callingib_device_put()on the non-error path.2) Extending the reference taken by
rxe_get_dev_from_net()inrxe_udp_encap_recv()until each skb is freed was not matched by a reference in the loopback path resulting in underflows.3) In
rxe_comp.cthe functionfree_pkt()did not clear skb which triggered a warning at done: and could possibly at exit: inrxe_completer(). TheWARN_ONCE()calls are not required at done:
and only in one place before going to exit.This patch fixes these errors.
Fixes 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")Signed-off-by Bob Pearson <[email protected]>--- drivers/infiniband/sw/rxe/rxe_comp.c | 5 +++-- drivers/infiniband/sw/rxe/rxe_net.c | 7 ++++++- drivers/infiniband/sw/rxe/rxe_recv.c | 6 ++++-- 3 files changed, 13 insertions(+), 5 deletions(-)drivers/infiniband/sw/rxe/rxe_comp.c +3
-2@@ -671,6 +671,9 @@ int rxe_completer(void *arg)* it down the road or let it expire */ +/* warn if we did receive a packet */ +WARN_ON_ONCE (skb); +/* there is nothing to retry in this case */ if (!wqe || (wqe->state == wqe_state_posted)) goto exit;@@ -750,7 +753,6 @@ int rxe_completer(void *arg)/* we come here if we are done with processing and want the task to * exit from the loop calling us */ -WARN_ON_ONCE (skb);rxe_drop_ref (qp);return -EAGAIN ;@@ -758,7 +760,6 @@ int rxe_completer(void *arg)/* we come here if we have processed a packet we want the task to call * us again to see if there is anything else to do */ -WARN_ON_ONCE (skb);rxe_drop_ref (qp);return 0 ; }drivers/infiniband/sw/rxe/rxe_net.c +6
-1@@ -406,12 +406,17 @@ int rxe_send(struct rxe_pkt_info *pkt, struct sk_buff *skb)void rxe_loopback (struct sk_buff *skb) { +struct rxe_pkt_info *pkt =SKB_TO_PKT (skb); +if (skb->protocol ==htons (ETH_P_IP ))skb_pull (skb,sizeof (struct iphdr ));else skb_pull (skb,sizeof (struct ipv6hdr )); -rxe_rcv (skb); +if (WARN_ON (!ib_device_try_get (&pkt->rxe->ib_dev))) +kfree_skb (skb); +else +rxe_rcv (skb); } struct sk_buff *rxe_init_packet(struct rxe_dev *rxe, struct rxe_av *av,drivers/infiniband/sw/rxe/rxe_recv.c +0
-0
drivers/infiniband/sw/rxe/rxe_recv.c static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb) · line 302
Quoted 6 lines
drivers/infiniband/sw/rxe/rxe_recv.c +1
-2@@ -299,8 +299,10 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb) err1:/* free skb if not consumed */ -kfree_skb (skb); -ib_device_put (&rxe->ib_dev); +if (unlikely (skb)) {
From Leon Romanovsky
"
Please don't put "if (a) kfree(a);" constructions unless you want to deal with daily flux of patches with attempt to remove "if". "
Zhu Yanjun
Quoted 9 lines
drivers/infiniband/sw/rxe/rxe_recv.c +3
-1+kfree_skb (skb); +ib_device_put (&rxe->ib_dev); + } }/** -- 2.27.0
Quoted 17 lines · Bob Pearson
Three errors occurred in the fix referenced below.
1) The on and off again 'if (skb)' got dropped but was really needed in
rxe_rcv_mcast_pkt()to prevent callingib_device_put()on the non-error path.2) Extending the reference taken by
rxe_get_dev_from_net()inrxe_udp_encap_recv()until each skb is freed was not matched by a reference in the loopback path resulting in underflows.3) In
rxe_comp.cthe functionfree_pkt()did not clear skb which triggered a warning at done: and could possibly at exit: inrxe_completer(). TheWARN_ONCE()calls are not required at done:
and only in one place before going to exit.This patch fixes these errors.
Quoted 7 lines
Fixes 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")Signed-off-by Bob Pearson <[email protected]>--- drivers/infiniband/sw/rxe/rxe_comp.c | 5 +++-- drivers/infiniband/sw/rxe/rxe_net.c | 7 ++++++- drivers/infiniband/sw/rxe/rxe_recv.c | 6 ++++-- 3 files changed, 13 insertions(+), 5 deletions(-)
drivers/infiniband/sw/rxe/rxe_recv.c +5 -4
@@ -247,6 +247,11 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)else if (skb->protocol ==htons (ETH_P_IPV6 ))memcpy (&dgid, &ipv6_hdr (skb)->daddr,sizeof (dgid)); +if (!ib_device_try_get (&rxe->ib_dev)) { +kfree_skb (skb); +return ; + } +/* lookup mcast group corresponding to mgid, takes a ref */ mcg =rxe_pool_get_key (&rxe->mc_grp_pool, &dgid);if (!mcg)
@@ -274,10 +279,6 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)*/ if (mce->qp_list.next != &mcg->qp_list) { per_qp_skb =skb_clone (skb,GFP_ATOMIC ); -if (WARN_ON (!ib_device_try_get (&rxe->ib_dev))) { -kfree_skb (per_qp_skb); -continue ; - } }else { per_qp_skb = skb;/* show we have consumed the skb */
Quoted 86 lines · Bob Pearson
Three errors occurred in the fix referenced below.
1) The on and off again 'if (skb)' got dropped but was really needed in
rxe_rcv_mcast_pkt()to prevent callingib_device_put()on the non-error path.2) Extending the reference taken by
rxe_get_dev_from_net()inrxe_udp_encap_recv()until each skb is freed was not matched by a reference in the loopback path resulting in underflows.3) In
rxe_comp.cthe functionfree_pkt()did not clear skb which triggered a warning at done: and could possibly at exit: inrxe_completer(). TheWARN_ONCE()calls are not required at done:
and only in one place before going to exit.This patch fixes these errors.
Fixes 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")Signed-off-by Bob Pearson <[email protected]>--- drivers/infiniband/sw/rxe/rxe_comp.c | 5 +++-- drivers/infiniband/sw/rxe/rxe_net.c | 7 ++++++- drivers/infiniband/sw/rxe/rxe_recv.c | 6 ++++-- 3 files changed, 13 insertions(+), 5 deletions(-)drivers/infiniband/sw/rxe/rxe_comp.c +3
-2@@ -671,6 +671,9 @@ int rxe_completer(void *arg)* it down the road or let it expire */ +/* warn if we did receive a packet */ +WARN_ON_ONCE (skb); +/* there is nothing to retry in this case */ if (!wqe || (wqe->state == wqe_state_posted)) goto exit;@@ -750,7 +753,6 @@ int rxe_completer(void *arg)/* we come here if we are done with processing and want the task to * exit from the loop calling us */ -WARN_ON_ONCE (skb);rxe_drop_ref (qp);return -EAGAIN ;@@ -758,7 +760,6 @@ int rxe_completer(void *arg)/* we come here if we have processed a packet we want the task to call * us again to see if there is anything else to do */ -WARN_ON_ONCE (skb);rxe_drop_ref (qp);return 0 ; }drivers/infiniband/sw/rxe/rxe_net.c +6
-1@@ -406,12 +406,17 @@ int rxe_send(struct rxe_pkt_info *pkt, struct sk_buff *skb)void rxe_loopback (struct sk_buff *skb) { +struct rxe_pkt_info *pkt =SKB_TO_PKT (skb); +if (skb->protocol ==htons (ETH_P_IP ))skb_pull (skb,sizeof (struct iphdr ));else skb_pull (skb,sizeof (struct ipv6hdr )); -rxe_rcv (skb); +if (WARN_ON (!ib_device_try_get (&pkt->rxe->ib_dev))) +kfree_skb (skb); +else +rxe_rcv (skb); } struct sk_buff *rxe_init_packet(struct rxe_dev *rxe, struct rxe_av *av,drivers/infiniband/sw/rxe/rxe_recv.c +0
-0@@ -299,8 +299,10 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb) err1:
drivers/infiniband/sw/rxe/rxe_recv.c static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb) · line 308
Quoted 10 lines
drivers/infiniband/sw/rxe/rxe_recv.c +4
-2/* free skb if not consumed */ -kfree_skb (skb); -ib_device_put (&rxe->ib_dev); +if (unlikely (skb)) { +kfree_skb (skb); +ib_device_put (&rxe->ib_dev); + } }/**
Just a reminder. rxe in for-next is broken until this gets done. thanks
bob
Jason Gunthorpe
maintainerQuoted 2 lines · Bob Pearson
Just a reminder. rxe in for-next is broken until this gets done. thanks
I was expecting you to resend it? There seemed to be some changes needed
https://patchwork.kernel.org/project/linux-rdma/patch/[email protected]/
Jason
Quoted 11 lines · Jason Gunthorpe
Quoted 2 lines · Bob Pearson
Just a reminder. rxe in for-next is broken until this gets done. thanks
I was expecting you to resend it? There seemed to be some changes needed
https://patchwork.kernel.org/project/linux-rdma/patch/[email protected]/
Jason
OK. I see. I agreed to that complaint when the kfree was the only thing in the if {} but now I have to call ib_device_put() *only* in the error case not if there wasn't an error. So no reason to not put the kfree_skb() in there too and avoid passing a NULL pointer. It should stay the way it is.
bob
Quoted 5 lines · Bob Pearson
Quoted 4 lines · Jason Gunthorpe
Quoted 2 lines · Bob Pearson
Just a reminder. rxe in for-next is broken until this gets done. thanks
Quoted 8 lines
Quoted 7 lines
I was expecting you to resend it? There seemed to be some changes needed
https://patchwork.kernel.org/project/linux-rdma/patch/[email protected]/
Jason
OK. I see. I agreed to that complaint when the kfree was the only thing in the if {} but now I have to call
ib_device_put()*only* in the error case not if there wasn't an error. So no reason to not put thekfree_skb()in there too and avoid passing a NULL pointer. It should stay the way it is.
First, I posted a diff which makes this if() redundant. Second, the if () before kfree() is checked by coccinelle and your "should stay the way it is" will be marked as failure in many CIs, including ours.
Thanks
Quoted 2 lines
bob
Quoted 13 lines · Leon Romanovsky
Quoted 12 lines · Bob Pearson
Quoted 11 lines · Jason Gunthorpe
Quoted 2 lines · Bob Pearson
Just a reminder. rxe in for-next is broken until this gets done. thanks
I was expecting you to resend it? There seemed to be some changes needed
https://patchwork.kernel.org/project/linux-rdma/patch/[email protected]/
Jason
Quoted 11 lines
Quoted 1 line
OK. I see. I agreed to that complaint when the kfree was the only thing in the if {} but now I have to call
ib_device_put()*only* in the error case not if there wasn't an error. So no reason to not put thekfree_skb()in there too and avoid passing a NULL pointer. It should stay the way it is.First, I posted a diff which makes this
if()redundant. Second, the if () beforekfree()is checked by coccinelle and your "should stay the way it is" will be marked as failure in many CIs, including ours.Thanks
Quoted 2 lines
bob
Leon,
I am not sure we are talking about the same if statement. You wrote
...
drivers/infiniband/sw/rxe/rxe_recv.c +5 -4
@@ -247,6 +247,11 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)else if (skb->protocol ==htons (ETH_P_IPV6 ))memcpy (&dgid, &ipv6_hdr (skb)->daddr,sizeof (dgid)); +if (!ib_device_try_get (&rxe->ib_dev)) { +kfree_skb (skb); +return ; + } +/* lookup mcast group corresponding to mgid, takes a ref */ mcg =rxe_pool_get_key (&rxe->mc_grp_pool, &dgid);if (!mcg)
@@ -274,10 +279,6 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)*/ if (mce->qp_list.next != &mcg->qp_list) { per_qp_skb =skb_clone (skb,GFP_ATOMIC ); -if (WARN_ON (!ib_device_try_get (&rxe->ib_dev))) { -kfree_skb (per_qp_skb); -continue ; - } }else { per_qp_skb = skb;/* show we have consumed the skb */
...
which I don't understand.
When a received packet is delivered to the rxe driver in rxe_net.c in rxe_udp_encap_recv() rxe_get_dev_from_net() is called which gets a pointer to the ib_device (contained in rxe_dev) and also takes a reference on the ib_device. This pointer is stored in skb->cb[] so the reference needs to be held until the skb is freed. If the skb has a multicast address and there are more than one QPs belonging to the multicast group then new skbs are cloned in rxe_rcv_mcast_pkt() and each has a pointer to the ib_device. Since each skb can have quite different lifetimes they each need to carry a reference to ib_device to protect against having it deleted out from under them. You suggest adding one more reference outside of the loop regardless of how many QPs, if any, belong to the multicast group. I don't see how this can be correct.
In any case this is *not* the if statement that is under discussion in the patch. That one has to do with an error which can occur if the last QP in the list (which gets the original skb in the non-error case) doesn't match or isn't ready to receive the packet and it fails either check_type_state() or check_keys() and falls out of the loop. Now the reference to the ib_device needs to be let go and the skb needs to be freed but only if this error occurs. In the normal case that all happens when the skb if done being processed after calling rxe_rcv_pkt().
So the discussion boils down to whether to type
...
err1:
kfree_skb(skb); if (unlikely(skb)) ib_device_put(&rxe->ib_dev);
or
err1:
if (unlikely(skb)) {
kfree_skb(skb);
ib_device_put(&rxe->ib_dev);
}Here the normal non-error path has skb == NULL and the error path has skb set to the originally delivered packet. The second choice is much clearer as it shows the intent and saves the wasted trip to kfree_skb() for every packet.
bob
Quoted 76 lines · Bob Pearson
Quoted 13 lines · Leon Romanovsky
Quoted 12 lines · Bob Pearson
Quoted 11 lines · Jason Gunthorpe
Quoted 2 lines · Bob Pearson
Just a reminder. rxe in for-next is broken until this gets done. thanks
I was expecting you to resend it? There seemed to be some changes needed
https://patchwork.kernel.org/project/linux-rdma/patch/[email protected]/
Jason
Quoted 11 lines
Quoted 1 line
OK. I see. I agreed to that complaint when the kfree was the only thing in the if {} but now I have to call
ib_device_put()*only* in the error case not if there wasn't an error. So no reason to not put thekfree_skb()in there too and avoid passing a NULL pointer. It should stay the way it is.First, I posted a diff which makes this
if()redundant. Second, the if () beforekfree()is checked by coccinelle and your "should stay the way it is" will be marked as failure in many CIs, including ours.Thanks
Quoted 2 lines
bob
Leon,
I am not sure we are talking about the same if statement. You wrote
...
drivers/infiniband/sw/rxe/rxe_recv.c +5
-4@@ -247,6 +247,11 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)else if (skb->protocol ==htons (ETH_P_IPV6 ))memcpy (&dgid, &ipv6_hdr (skb)->daddr,sizeof (dgid)); +if (!ib_device_try_get (&rxe->ib_dev)) { +kfree_skb (skb); +return ; + } +/* lookup mcast group corresponding to mgid, takes a ref */ mcg =rxe_pool_get_key (&rxe->mc_grp_pool, &dgid);if (!mcg)@@ -274,10 +279,6 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)*/ if (mce->qp_list.next != &mcg->qp_list) { per_qp_skb =skb_clone (skb,GFP_ATOMIC ); -if (WARN_ON (!ib_device_try_get (&rxe->ib_dev))) { -kfree_skb (per_qp_skb); -continue ; - } }else { per_qp_skb = skb;/* show we have consumed the skb */ which I don't understand.
When a received packet is delivered to the rxe driver in
rxe_net.cinrxe_udp_encap_recv()rxe_get_dev_from_net()is called which gets a pointer to theib_device(contained inrxe_dev) and also takes a reference on theib_device. This pointer is stored in skb->cb[] so the reference needs to be held until the skb is freed. If the skb has a multicast address and there are more than one QPs belonging to the multicast group then new skbs are cloned inrxe_rcv_mcast_pkt()and each has a pointer to theib_device. Since each skb can have quite different lifetimes they each need to carry a reference toib_deviceto protect against having it deleted out from under them. You suggest adding one more reference outside of the loop regardless of how many QPs, if any, belong to the multicast group. I don't see how this can be correct.In any case this is *not* the if statement that is under discussion in the patch. That one has to do with an error which can occur if the last QP in the list (which gets the original skb in the non-error case) doesn't match or isn't ready to receive the packet and it fails either
check_type_state()orcheck_keys()and falls out of the loop. Now the reference to theib_deviceneeds to be let go and the skb needs to be freed but only if this error occurs. In the normal case that all happens when the skb if done being processed after callingrxe_rcv_pkt().So the discussion boils down to whether to type
...
err1:kfree_skb(skb); if (unlikely(skb)) ib_device_put(&rxe->ib_dev);or
Quoted 7 lines
err1:
if (unlikely(skb)) { kfree_skb(skb); ib_device_put(&rxe->ib_dev); }Here the normal non-error path has skb == NULL and the error path has skb set to the originally delivered packet. The second choice is much clearer as it shows the intent and saves the wasted trip to
kfree_skb()for every packet.
Can you please configure your mail client so your replies won't be one long unreadable lines? It will help us to read your replies and we will be able to answer them separately.
Once the rxe_rcv_mcast_pkt() is called, the device and SKB are already "connected" each one to another, so I don't understand the claims about different lifetimes. It is not the "if ()", but the whole idea that every SKB increments reference counter sounds very strange.
All QPs, mcast groups and SKB points to the same ib_dev and even one refcount is enough to ensure that it won't vanish. This is why it is enough to call ib_device_try_get() at the beginning of this function.
Also the combination of ib_device_get() together with unlikely() to save kfree call can't be right either.
Thanks
Quoted 2 lines
bob
Quoted 83 lines · Leon Romanovsky
Quoted 82 lines · Bob Pearson
Quoted 13 lines · Leon Romanovsky
Quoted 12 lines · Bob Pearson
Quoted 11 lines · Jason Gunthorpe
Quoted 2 lines · Bob Pearson
Just a reminder. rxe in for-next is broken until this gets done. thanks
I was expecting you to resend it? There seemed to be some changes needed
https://patchwork.kernel.org/project/linux-rdma/patch/[email protected]/
Jason
Quoted 11 lines
Quoted 1 line
OK. I see. I agreed to that complaint when the kfree was the only thing in the if {} but now I have to call
ib_device_put()*only* in the error case not if there wasn't an error. So no reason to not put thekfree_skb()in there too and avoid passing a NULL pointer. It should stay the way it is.First, I posted a diff which makes this
if()redundant. Second, the if () beforekfree()is checked by coccinelle and your "should stay the way it is" will be marked as failure in many CIs, including ours.Thanks
Quoted 2 lines
bob
Leon,
I am not sure we are talking about the same if statement. You wrote
...
drivers/infiniband/sw/rxe/rxe_recv.c +5
-4@@ -247,6 +247,11 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)else if (skb->protocol ==htons (ETH_P_IPV6 ))memcpy (&dgid, &ipv6_hdr (skb)->daddr,sizeof (dgid)); +if (!ib_device_try_get (&rxe->ib_dev)) { +kfree_skb (skb); +return ; + } +/* lookup mcast group corresponding to mgid, takes a ref */ mcg =rxe_pool_get_key (&rxe->mc_grp_pool, &dgid);if (!mcg)@@ -274,10 +279,6 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)*/ if (mce->qp_list.next != &mcg->qp_list) { per_qp_skb =skb_clone (skb,GFP_ATOMIC ); -if (WARN_ON (!ib_device_try_get (&rxe->ib_dev))) { -kfree_skb (per_qp_skb); -continue ; - } }else { per_qp_skb = skb;/* show we have consumed the skb */ which I don't understand.
When a received packet is delivered to the rxe driver in
rxe_net.cinrxe_udp_encap_recv()rxe_get_dev_from_net()is called which gets a pointer to theib_device(contained inrxe_dev) and also takes a reference on theib_device. This pointer is stored in skb->cb[] so the reference needs to be held until the skb is freed. If the skb has a multicast address and there are more than one QPs belonging to the multicast group then new skbs are cloned inrxe_rcv_mcast_pkt()and each has a pointer to theib_device. Since each skb can have quite different lifetimes they each need to carry a reference toib_deviceto protect against having it deleted out from under them. You suggest adding one more reference outside of the loop regardless of how many QPs, if any, belong to the multicast group. I don't see how this can be correct.In any case this is *not* the if statement that is under discussion in the patch. That one has to do with an error which can occur if the last QP in the list (which gets the original skb in the non-error case) doesn't match or isn't ready to receive the packet and it fails either
check_type_state()orcheck_keys()and falls out of the loop. Now the reference to theib_deviceneeds to be let go and the skb needs to be freed but only if this error occurs. In the normal case that all happens when the skb if done being processed after callingrxe_rcv_pkt().So the discussion boils down to whether to type
...
err1:kfree_skb(skb); if (unlikely(skb)) ib_device_put(&rxe->ib_dev);or
err1:
if (unlikely(skb)) { kfree_skb(skb); ib_device_put(&rxe->ib_dev); }
Quoted 5 lines
Quoted 1 line
Here the normal non-error path has skb == NULL and the error path has skb set to the originally delivered packet. The second choice is much clearer as it shows the intent and saves the wasted trip to
kfree_skb()for every packet.Can you please configure your mail client so your replies won't be one long unreadable lines? It will help us to read your replies and we will be able to answer them separately.
Sorry about that. It's Thunderbird. Looking for a solution.
Quoted 5 lines
Once the
rxe_rcv_mcast_pkt()is called, the device and SKB are already "connected" each one to another, so I don't understand the claims about different lifetimes. It is not the "if ()", but the whole idea that every SKB increments reference counter sounds very strange.
The purpose of rxe_rcv_mcast_pkt() is to replicate the original received skb as many times as necessary to enqueue to the multiple QPs which are listening to the multicast address. Depending on the queue depths, which CPU, etc. they will take more or less time to process. There is no telling which one of them will be the last one to get done. Counting them is the easiest way to figure out when we are complete.
Quoted 4 lines
All QPs, mcast groups and SKB points to the same
ib_devand even one refcount is enough to ensure that it won't vanish. This is why it is enough to callib_device_try_get()at the beginning of this function.
I agree that ib_device_get/put is attempting to solve a problem that it not really very critical since ib_device is very unlikely to be shut down in the middle of a data transfer. The driver never worried about this for years. But now that it's been put on the table it should be done right. A data packet arriving is completely independent of the verbs API which *could* delete all the QPs and shut down the HCA while it was wondering around the universe or worse yet while the packet is being processed.
You are correct one call will protect the address, but how will you decide when you are ready to drop that one reference? You have N clones of the skb sitting on queues waiting to get processed. Where do you stick the drop reference so that it only happens once and only when all the skbs are done?
Quoted 3 lines
Also the combination of
ib_device_get()together withunlikely()to save kfree call can't be right either.
That is not why they are there. The ib_device_put is there because the skb holds a reference to the ib_device so it needs to be dropped. The unlikely is because it is actually unlikely. It only happens when there is a bad packet.
Quoted 5 lines
Thanks
Quoted 2 lines
bob
Jason Gunthorpe
maintainerQuoted 7 lines · Bob Pearson
I agree that ib_device_get/put is attempting to solve a problem that it not really very critical since
ib_deviceis very unlikely to be shut down in the middle of a data transfer. The driver never worried about this for years. But now that it's been put on the table it should be done right. A data packet arriving is completely independent of the verbs API which *could* delete all the QPs and shut down the HCA while it was wondering around the universe or worse yet while the packet is being processed.
If driver shutdown can guarentee that all pointers involved in multicast are revoked before shutdown can finish then you don't need this refcounting.
It was only brought up because the API that returns the ib_device from the netdev requires the refcounts as it is general purpose
Jason
Quoted 17 lines
From: Jason Gunthorpe <[email protected]>
Sent: Monday, March 1, 2021 11:36 AM
To: Bob Pearson <[email protected]>
Cc: Leon Romanovsky <[email protected]>; [email protected]; [email protected]; Zago, Frank <[email protected]>
Subject: Re: [PATCH for-next] RDMA/rxe: Fixib_devicereference counting (again)Quoted 7 lines · Bob Pearson
I agree that ib_device_get/put is attempting to solve a problem that
it not really very critical sinceib_deviceis very unlikely to be
shut down in the middle of a data transfer. The driver never worried about this for years. But now that it's been put on the table it should be done right. A
data packet arriving is completely independent of the verbs API which *could* delete all the QPs and shut down the HCA while it was
wondering around the universe or worse yet while the packet is being processed.
Quoted 6 lines
If driver shutdown can guarentee that all pointers involved in multicast are revoked before shutdown can finish then you don't need this refcounting.
It was only brought up because the API that returns the
ib_devicefrom the netdev requires the refcounts as it is general purposeJason
Unfortunately what you ask for is exactly what the refcounting code accomplishes and I don't see a simpler way to get there. This also applies to the non-multicast packets as well but all the debate has been about the code in rxe_rcv_mcast_pkt() because it is more blatant there or because I haven't been able to explain how it works well enough.
Bob
Jason Gunthorpe
maintainerQuoted 17 lines · Robert B
Quoted 10 lines · Bob Pearson
Quoted 8 lines
I agree that ib_device_get/put is attempting to solve a problem that
it not really very critical sinceib_deviceis very unlikely to be
shut down in the middle of a data transfer. The driver never worried about this for years. But now that it's been put on the table it should be done right. A
data packet arriving is completely independent of the verbs API which *could* delete all the QPs and shut down the HCA while it was
wondering around the universe or worse yet while the packet is being processed.Quoted 6 lines
If driver shutdown can guarentee that all pointers involved in multicast are revoked before shutdown can finish then you don't need this refcounting.
It was only brought up because the API that returns the
ib_devicefrom the netdev requires the refcounts as it is general purpose
Quoted 6 lines
Unfortunately what you ask for is exactly what the refcounting code accomplishes and I don't see a simpler way to get there. This also applies to the non-multicast packets as well but all the debate has been about the code in
rxe_rcv_mcast_pkt()because it is more blatant there or because I haven't been able to explain how it works well enough.
Usually in the netstack land the shutdown of the device flushes all this parallel work out so all the dataplane can happily ignore all these details.
I'm not so clear on all these details and how they apply to rxe of course. You'd have to look at the full lifecycle of this skb and show that the kfree_skb happens only before any unregistration finishes.
Most likely there are other bugs if the unregistration can pass while the skb is still out there.
But, I'm not clear on how any of this works in rxe, this is just a general remark on how things should ideally work.
Jason
Quoted 33 lines · Jason Gunthorpe
Quoted 17 lines · Robert B
Quoted 10 lines · Bob Pearson
Quoted 8 lines
I agree that ib_device_get/put is attempting to solve a problem that
it not really very critical sinceib_deviceis very unlikely to be
shut down in the middle of a data transfer. The driver never worried about this for years. But now that it's been put on the table it should be done right. A
data packet arriving is completely independent of the verbs API which *could* delete all the QPs and shut down the HCA while it was
wondering around the universe or worse yet while the packet is being processed.Quoted 6 lines
If driver shutdown can guarentee that all pointers involved in multicast are revoked before shutdown can finish then you don't need this refcounting.
It was only brought up because the API that returns the
ib_devicefrom the netdev requires the refcounts as it is general purposeQuoted 6 lines
Unfortunately what you ask for is exactly what the refcounting code accomplishes and I don't see a simpler way to get there. This also applies to the non-multicast packets as well but all the debate has been about the code in
rxe_rcv_mcast_pkt()because it is more blatant there or because I haven't been able to explain how it works well enough.Usually in the netstack land the shutdown of the device flushes all this parallel work out so all the dataplane can happily ignore all these details.
I'm not so clear on all these details and how they apply to rxe of course. You'd have to look at the full lifecycle of this skb and show that the
kfree_skbhappens only before any unregistration finishes.
Quoted 5 lines
Most likely there are other bugs if the unregistration can pass while the skb is still out there.
But, I'm not clear on how any of this works in rxe, this is just a general remark on how things should ideally work.
+1, I have same understanding and expect SKB to be flushed and new SKB are prevented from entering ib_device if it is going under destroy.
Thanks
Quoted 2 lines
Jason
Zhu Yanjun
maintainerQuoted 77 lines · Bob Pearson
Quoted 13 lines · Leon Romanovsky
Quoted 12 lines · Bob Pearson
Quoted 11 lines · Jason Gunthorpe
Quoted 2 lines · Bob Pearson
Just a reminder. rxe in for-next is broken until this gets done. thanks
I was expecting you to resend it? There seemed to be some changes needed
https://patchwork.kernel.org/project/linux-rdma/patch/[email protected]/
Jason
Quoted 11 lines
Quoted 1 line
OK. I see. I agreed to that complaint when the kfree was the only thing in the if {} but now I have to call
ib_device_put()*only* in the error case not if there wasn't an error. So no reason to not put thekfree_skb()in there too and avoid passing a NULL pointer. It should stay the way it is.First, I posted a diff which makes this
if()redundant. Second, the if () beforekfree()is checked by coccinelle and your "should stay the way it is" will be marked as failure in many CIs, including ours.Thanks
Quoted 2 lines
bob
Leon,
I am not sure we are talking about the same if statement. You wrote
...
drivers/infiniband/sw/rxe/rxe_recv.c +5
-4@@ -247,6 +247,11 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)else if (skb->protocol ==htons (ETH_P_IPV6 ))memcpy (&dgid, &ipv6_hdr (skb)->daddr,sizeof (dgid)); +if (!ib_device_try_get (&rxe->ib_dev)) { +kfree_skb (skb); +return ; + } +/* lookup mcast group corresponding to mgid, takes a ref */ mcg =rxe_pool_get_key (&rxe->mc_grp_pool, &dgid);if (!mcg)@@ -274,10 +279,6 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)*/ if (mce->qp_list.next != &mcg->qp_list) { per_qp_skb =skb_clone (skb,GFP_ATOMIC ); -if (WARN_ON (!ib_device_try_get (&rxe->ib_dev))) { -kfree_skb (per_qp_skb); -continue ; - } }else { per_qp_skb = skb;/* show we have consumed the skb */ which I don't understand.
When a received packet is delivered to the rxe driver in
rxe_net.cinrxe_udp_encap_recv()rxe_get_dev_from_net()is called which gets a pointer to theib_device(contained inrxe_dev) and also takes a reference on theib_device. This pointer is stored in skb->cb[] so the reference needs to be held until the skb is freed. If the skb has a multicast address and there are more than one QPs belonging to the multicast group then new skbs are cloned inrxe_rcv_mcast_pkt()and each has a pointer to theib_device. Since each skb can have quite different lifetimes they each need to carry a reference toib_deviceto protect against having it deleted out from under them. You suggest adding one more reference outside of the loop regardless of how many QPs, if any, belong to the multicast group. I don't see how this can be correct.In any case this is *not* the if statement that is under discussion in the patch. That one has to do with an error which can occur if the last QP in the list (which gets the original skb in the non-error case) doesn't match or isn't ready to receive the packet and it fails either
check_type_state()orcheck_keys()and falls out of the loop. Now the reference to theib_deviceneeds to be let go and the skb needs to be freed but only if this error occurs. In the normal case that all happens when the skb if done being processed after callingrxe_rcv_pkt().So the discussion boils down to whether to type
...
err1:kfree_skb(skb); if (unlikely(skb)) ib_device_put(&rxe->ib_dev);or
Quoted 7 lines
err1:
if (unlikely(skb)) { kfree_skb(skb); ib_device_put(&rxe->ib_dev); }Here the normal non-error path has skb == NULL and the error path has skb set to the originally delivered packet. The second choice is much clearer as it shows the intent and saves the wasted trip to
kfree_skb()for every packet.
Placing kfree_skb in a if (skb) test is not good.
Zhu Yanjun
Quoted 2 lines
bob
Zhu Yanjun
maintainerQuoted 49 lines · Bob Pearson
Three errors occurred in the fix referenced below.
1) The on and off again 'if (skb)' got dropped but was really needed in
rxe_rcv_mcast_pkt()to prevent callingib_device_put()on the non-error path.2) Extending the reference taken by
rxe_get_dev_from_net()inrxe_udp_encap_recv()until each skb is freed was not matched by a reference in the loopback path resulting in underflows.3) In
rxe_comp.cthe functionfree_pkt()did not clear skb which triggered a warning at done: and could possibly at exit: inrxe_completer(). TheWARN_ONCE()calls are not required at done:
and only in one place before going to exit.This patch fixes these errors.
Fixes 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")Signed-off-by Bob Pearson <[email protected]>--- drivers/infiniband/sw/rxe/rxe_comp.c | 5 +++-- drivers/infiniband/sw/rxe/rxe_net.c | 7 ++++++- drivers/infiniband/sw/rxe/rxe_recv.c | 6 ++++-- 3 files changed, 13 insertions(+), 5 deletions(-)drivers/infiniband/sw/rxe/rxe_comp.c +3
-1@@ -671,6 +671,9 @@ int rxe_completer(void *arg)* it down the road or let it expire */ +/* warn if we did receive a packet */ +WARN_ON_ONCE (skb); +/* there is nothing to retry in this case */ if (!wqe || (wqe->state == wqe_state_posted)) goto exit;@@ -750,7 +753,6 @@ int rxe_completer(void *arg)/* we come here if we are done with processing and want the task to * exit from the loop calling us */ -WARN_ON_ONCE (skb);rxe_drop_ref (qp);return -EAGAIN ;
drivers/infiniband/sw/rxe/rxe_comp.c int rxe_completer(void *arg) · line 761
Quoted 4 lines
drivers/infiniband/sw/rxe/rxe_comp.c +0
-1@@ -758,7 +760,6 @@ int rxe_completer(void *arg)/* we come here if we have processed a packet we want the task to call * us again to see if there is anything else to do */ -WARN_ON_ONCE (skb);
When I keep "WARN_ON_ONCE(skb);", others are applied into -net, then I run "rping " command. I got the followings.
It seems that SKBs are not freed.
"
[ 4068.003830] ------------[ cut here ]------------ [ 4068.003833] WARNING: CPU: 10 PID: 4241 at drivers/infiniband/sw/rxe//rxe_comp.c:762 rxe_completer+0x982/0xd60 [rdma_rxe] [ 4068.003845] Modules linked in: rdma_rxe(OE) rdma_ucm rdma_cm iw_cm
ib_cm ib_uverbs ib_core dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common isst_if_common nfit rapl snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd soundcore joydev input_leds serio_raw mac_hid sch_fq_codel ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid vmwgfx ttm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drm_kms_helper syscopyarea sysfillrect aesni_intel sysimgblt fb_sys_fops crypto_simd psmouse cec cryptd ahci drm e1000 i2c_piix4 libahci pata_acpi video [last unloaded: rdma_rxe]
[ 4068.003898] CPU: 10 PID: 4241 Comm: rping Kdump: loaded Tainted: G
W OE 5.11.0+ #1
[ 4068.003901] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 4068.003902] RIP: 0010:rxe_completer+0x982/0xd60 [rdma_rxe]
[ 4068.003907] Code: 8d 7f 08 e8 70 94 39 de e9 f4 f6 ff ff 39 ca b8
0e 00 00 00 ba 03 00 00 00 0f 44 c2 89 c3 e9 44 f7 ff ff 0f 0b e9 af
f9 ff ff <0f> 0b e9 23 f9 ff ff 0f 0b e9 ef f9 ff ff 49 8d 9f 30 08 00
00 48
[ 4068.003909] RSP: 0018:ffffb3d7c0bf37f0 EFLAGS: 00010286
[ 4068.003911] RAX: 0000000000000008 RBX: 000000000000000e RCX: ffffffff9fa7fee8
[ 4068.003912] RDX: 0000000000000507 RSI: ffffffff9ef6e47e RDI: ffff939ace4b0000
[ 4068.003913] RBP: ffffb3d7c0bf3850 R08: ffff939ac30f1c00 R09: 0000000000000001
[ 4068.003915] R10: ffffb3d7c0bf3888 R11: 0000000000000000 R12: ffffb3d7c0127180
[ 4068.003916] R13: ffff939ad166a728 R14: 0000000000000000 R15: ffff939ad0fd8000
[ 4068.003917] FS: 00007f1f105b4740(0000) GS:ffff939dcfc80000(0000)
knlGS:0000000000000000
[ 4068.003919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4068.003920] CR2: 00007f9bc63f7fb8 CR3: 000000010e12a002 CR4: 00000000000706e0
[ 4068.003923] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4068.003924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4068.003926] Call Trace:
[ 4068.003929] rxe_do_task+0xa7/0xf0 [rdma_rxe]
[ 4068.003934] rxe_run_task+0x2a/0x40 [rdma_rxe]
[ 4068.003938] rxe_comp_queue_pkt+0x48/0x50 [rdma_rxe]
[ 4068.003942] rxe_rcv+0x339/0x860 [rdma_rxe]
[ 4068.003946] ? prepare_ack_packet+0x1b6/0x250 [rdma_rxe]
[ 4068.003951] rxe_loopback+0x53/0x90 [rdma_rxe]
[ 4068.003955] send_ack+0xac/0x170 [rdma_rxe]
[ 4068.003959] rxe_responder+0x15bf/0x2220 [rdma_rxe]
[ 4068.003964] rxe_do_task+0xa7/0xf0 [rdma_rxe]
[ 4068.003968] rxe_run_task+0x2a/0x40 [rdma_rxe]
[ 4068.003972] rxe_resp_queue_pkt+0x44/0x50 [rdma_rxe]
[ 4068.003976] rxe_rcv+0x286/0x860 [rdma_rxe]
[ 4068.003979] ? copy_data+0xc4/0x2a0 [rdma_rxe]
[ 4068.003984] rxe_loopback+0x53/0x90 [rdma_rxe]
[ 4068.003987] rxe_requester+0x6ec/0x10a0 [rdma_rxe]
[ 4068.003991] ? _raw_spin_unlock_irqrestore+0xe/0x30
[ 4068.003996] rxe_do_task+0xa7/0xf0 [rdma_rxe]
[ 4068.004000] rxe_run_task+0x2a/0x40 [rdma_rxe]
[ 4068.004004] rxe_post_send+0x320/0x530 [rdma_rxe]
[ 4068.004008] ? lookup_get_idr_uobject+0x19/0x30 [ib_uverbs]
[ 4068.004016] ? rdma_lookup_get_uobject+0x47/0x180 [ib_uverbs]
[ 4068.004022] ib_uverbs_post_send+0x64d/0x6e0 [ib_uverbs]
[ 4068.004028] ? __wake_up+0x13/0x20
[ 4068.004033] ib_uverbs_write+0x44f/0x580 [ib_uverbs]
[ 4068.004039] vfs_write+0xb9/0x250
[ 4068.004043] ksys_write+0xb1/0xe0
[ 4068.004045] __x64_sys_write+0x1a/0x20
[ 4068.004048] do_syscall_64+0x38/0x90
[ 4068.004052] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 4068.004054] RIP: 0033:0x7f1f1087f2cf
[ 4068.004056] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 fd
ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00
00 0f 05 <48> 3d 00 f0 ff ff 77 2d 44 89 c7 48 89 44 24 08 e8 5c fd ff
ff 48
[ 4068.004058] RSP: 002b:00007ffd14eb1d00 EFLAGS: 00000293 ORIG_RAX:
0000000000000001
[ 4068.004060] RAX: ffffffffffffffda RBX: 00007f1f0fcd6180 RCX: 00007f1f1087f2cf
[ 4068.004061] RDX: 0000000000000020 RSI: 00007ffd14eb1d60 RDI: 0000000000000004
[ 4068.004062] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000027
[ 4068.004063] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001
[ 4068.004064] R13: 000055ad34999e80 R14: 0000000000000000 R15: 0000000000000000
[ 4068.004066] ---[ end trace 719f4d5687d4ac94 ]---"
Quoted 46 lines
drivers/infiniband/sw/rxe/rxe_comp.c +0
-0rxe_drop_ref (qp);return 0 ; }drivers/infiniband/sw/rxe/rxe_net.c +6
-1@@ -406,12 +406,17 @@ int rxe_send(struct rxe_pkt_info *pkt, struct sk_buff *skb)void rxe_loopback (struct sk_buff *skb) { +struct rxe_pkt_info *pkt =SKB_TO_PKT (skb); +if (skb->protocol ==htons (ETH_P_IP ))skb_pull (skb,sizeof (struct iphdr ));else skb_pull (skb,sizeof (struct ipv6hdr )); -rxe_rcv (skb); +if (WARN_ON (!ib_device_try_get (&pkt->rxe->ib_dev))) +kfree_skb (skb); +else +rxe_rcv (skb); } struct sk_buff *rxe_init_packet(struct rxe_dev *rxe, struct rxe_av *av,drivers/infiniband/sw/rxe/rxe_recv.c +4
-3@@ -299,8 +299,10 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb) err1:/* free skb if not consumed */ -kfree_skb (skb); -ib_device_put (&rxe->ib_dev); +if (unlikely (skb)) { +kfree_skb (skb); +ib_device_put (&rxe->ib_dev); + } }/** -- 2.27.0
Resending in plain text (I hope)
Zhu,
You caught a bug of mine. Thanks.
Before the patch there were WARN_ON_ONCE() at exit: and done:
but almost all the goto done or goto exit followed calls to free_pkt() which calls kfree_skb(skb) on the skb but may not
clear the local variable skb. This part of the patch was trying to clean this up by getting rid of the warnings.
Remember pkt points to skb->cb[] so one can convert between skb and pkt. There were two exceptions, one in case COMPST_EXIT
and one in COMPST_ERROR_RETRY where there is not a call to free_pkt() before the goto.COMPST_EXIT is returned from get_wqe() but only if pkt == NULL so there is no skb in that case. HoweverCOMPST_ERROR_RETRY is returned from check_psn() and check_ack() and in both cases there are response packets
present!!
If !wqe || wqe->state != wqe_state_posted the original code went to exit where it would have hit the warning so I tried to replace it with one there in the code but it is in the wrong place. To match the functionality of the original code it should have been in the if. It should been
if (!wqe || (wqe->state == wqe_state_posted)) {
WARN_ON_ONCE(skb);
goto exit;
}From the comment above this this looks like they were testing for a "spurious" timer firing and just ignoring it. This will cause the WARNING but it may not be critical. But since I put the WARNING too early it will fire in cases where that was not the intent. If we move the WARN down a line or two it should fix your current problem.
Bob
Quoted 189 lines · Zhu Yanjun
Quoted 49 lines · Bob Pearson
Three errors occurred in the fix referenced below.
1) The on and off again 'if (skb)' got dropped but was really needed in
rxe_rcv_mcast_pkt()to prevent callingib_device_put()on the non-error path.2) Extending the reference taken by
rxe_get_dev_from_net()inrxe_udp_encap_recv()until each skb is freed was not matched by a reference in the loopback path resulting in underflows.3) In
rxe_comp.cthe functionfree_pkt()did not clear skb which triggered a warning at done: and could possibly at exit: inrxe_completer(). TheWARN_ONCE()calls are not required at done:
and only in one place before going to exit.This patch fixes these errors.
Fixes 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")Signed-off-by Bob Pearson <[email protected]>--- drivers/infiniband/sw/rxe/rxe_comp.c | 5 +++-- drivers/infiniband/sw/rxe/rxe_net.c | 7 ++++++- drivers/infiniband/sw/rxe/rxe_recv.c | 6 ++++-- 3 files changed, 13 insertions(+), 5 deletions(-)drivers/infiniband/sw/rxe/rxe_comp.c +3
-1@@ -671,6 +671,9 @@ int rxe_completer(void *arg)* it down the road or let it expire */ +/* warn if we did receive a packet */ +WARN_ON_ONCE (skb); +/* there is nothing to retry in this case */ if (!wqe || (wqe->state == wqe_state_posted)) goto exit;@@ -750,7 +753,6 @@ int rxe_completer(void *arg)/* we come here if we are done with processing and want the task to * exit from the loop calling us */ -WARN_ON_ONCE (skb);rxe_drop_ref (qp);return -EAGAIN ;drivers/infiniband/sw/rxe/rxe_comp.c int rxe_completer(void *arg) · line 761
Quoted 4 lines
drivers/infiniband/sw/rxe/rxe_comp.c +0
-1@@ -758,7 +760,6 @@ int rxe_completer(void *arg)/* we come here if we have processed a packet we want the task to call * us again to see if there is anything else to do */ -WARN_ON_ONCE (skb);When I keep "
WARN_ON_ONCE(skb);", others are applied into -net, then I run "rping " command. I got the followings.
It seems that SKBs are not freed."
[ 4068.003830] ------------[ cut here ]------------ [ 4068.003833] WARNING: CPU: 10 PID: 4241 at drivers/infiniband/sw/rxe//rxe_comp.c:762 rxe_completer+0x982/0xd60 [rdma_rxe] [ 4068.003845] Modules linked in: rdma_rxe(OE) rdma_ucm rdma_cm iw_cm
ib_cmib_uverbsib_coredm_multipathscsi_dh_rdacscsi_dh_emcscsi_dh_aluaintel_rapl_msrintel_rapl_commonisst_if_commonnfit raplsnd_intel8x0snd_ac97_codecac97_bussnd_pcmsnd_timersnd soundcore joydevinput_ledsserio_rawmac_hidsch_fq_codelip_tablesx_tablesautofs4 btrfsblake2b_genericzstd_compressraid10 raid456async_raid6_recovasync_memcpyasync_pqasync_xorasync_txxorraid6_pqlibcrc32c raid1 raid0 multipath linearhid_genericusbhid hid vmwgfx ttmcrct10dif_pclmulcrc32_pclmulghash_clmulni_inteldrm_kms_helpersyscopyarea sysfillrectaesni_intelsysimgbltfb_sys_fopscrypto_simdpsmouse cec cryptd ahci drm e1000i2c_piix4libahcipata_acpivideo [last unloaded:rdma_rxe][ 4068.003898] CPU: 10 PID: 4241 Comm: rping Kdump: loaded Tainted: G W OE 5.11.0+ #1 [ 4068.003901] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 4068.003902] RIP: 0010:rxe_completer+0x982/0xd60 [rdma_rxe] [ 4068.003907] Code: 8d 7f 08 e8 70 94 39 de e9 f4 f6 ff ff 39 ca b8 0e 00 00 00 ba 03 00 00 00 0f 44 c2 89 c3 e9 44 f7 ff ff 0f 0b e9 af f9 ff ff <0f> 0b e9 23 f9 ff ff 0f 0b e9 ef f9 ff ff 49 8d 9f 30 08 00 00 48 [ 4068.003909] RSP: 0018:ffffb3d7c0bf37f0 EFLAGS: 00010286 [ 4068.003911] RAX: 0000000000000008 RBX: 000000000000000e RCX: ffffffff9fa7fee8 [ 4068.003912] RDX: 0000000000000507 RSI: ffffffff9ef6e47e RDI: ffff939ace4b0000 [ 4068.003913] RBP: ffffb3d7c0bf3850 R08: ffff939ac30f1c00 R09: 0000000000000001 [ 4068.003915] R10: ffffb3d7c0bf3888 R11: 0000000000000000 R12: ffffb3d7c0127180 [ 4068.003916] R13: ffff939ad166a728 R14: 0000000000000000 R15: ffff939ad0fd8000 [ 4068.003917] FS: 00007f1f105b4740(0000) GS:ffff939dcfc80000(0000) knlGS:0000000000000000 [ 4068.003919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4068.003920] CR2: 00007f9bc63f7fb8 CR3: 000000010e12a002 CR4: 00000000000706e0 [ 4068.003923] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4068.003924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4068.003926] Call Trace: [ 4068.003929] rxe_do_task+0xa7/0xf0 [rdma_rxe] [ 4068.003934] rxe_run_task+0x2a/0x40 [rdma_rxe] [ 4068.003938] rxe_comp_queue_pkt+0x48/0x50 [rdma_rxe] [ 4068.003942] rxe_rcv+0x339/0x860 [rdma_rxe] [ 4068.003946] ? prepare_ack_packet+0x1b6/0x250 [rdma_rxe] [ 4068.003951] rxe_loopback+0x53/0x90 [rdma_rxe] [ 4068.003955] send_ack+0xac/0x170 [rdma_rxe] [ 4068.003959] rxe_responder+0x15bf/0x2220 [rdma_rxe] [ 4068.003964] rxe_do_task+0xa7/0xf0 [rdma_rxe] [ 4068.003968] rxe_run_task+0x2a/0x40 [rdma_rxe] [ 4068.003972] rxe_resp_queue_pkt+0x44/0x50 [rdma_rxe] [ 4068.003976] rxe_rcv+0x286/0x860 [rdma_rxe] [ 4068.003979] ? copy_data+0xc4/0x2a0 [rdma_rxe] [ 4068.003984] rxe_loopback+0x53/0x90 [rdma_rxe] [ 4068.003987] rxe_requester+0x6ec/0x10a0 [rdma_rxe] [ 4068.003991] ? _raw_spin_unlock_irqrestore+0xe/0x30 [ 4068.003996] rxe_do_task+0xa7/0xf0 [rdma_rxe] [ 4068.004000] rxe_run_task+0x2a/0x40 [rdma_rxe] [ 4068.004004] rxe_post_send+0x320/0x530 [rdma_rxe] [ 4068.004008] ? lookup_get_idr_uobject+0x19/0x30 [ib_uverbs] [ 4068.004016] ? rdma_lookup_get_uobject+0x47/0x180 [ib_uverbs] [ 4068.004022] ib_uverbs_post_send+0x64d/0x6e0 [ib_uverbs] [ 4068.004028] ? __wake_up+0x13/0x20 [ 4068.004033] ib_uverbs_write+0x44f/0x580 [ib_uverbs] [ 4068.004039] vfs_write+0xb9/0x250 [ 4068.004043] ksys_write+0xb1/0xe0 [ 4068.004045] __x64_sys_write+0x1a/0x20 [ 4068.004048] do_syscall_64+0x38/0x90 [ 4068.004052] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 4068.004054] RIP: 0033:0x7f1f1087f2cf [ 4068.004056] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2d 44 89 c7 48 89 44 24 08 e8 5c fd ff ff 48 [ 4068.004058] RSP: 002b:00007ffd14eb1d00 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 4068.004060] RAX: ffffffffffffffda RBX: 00007f1f0fcd6180 RCX: 00007f1f1087f2cf [ 4068.004061] RDX: 0000000000000020 RSI: 00007ffd14eb1d60 RDI: 0000000000000004 [ 4068.004062] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000027 [ 4068.004063] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001 [ 4068.004064] R13: 000055ad34999e80 R14: 0000000000000000 R15: 0000000000000000 [ 4068.004066] ---[ end trace 719f4d5687d4ac94 ]---"
Quoted 46 lines
drivers/infiniband/sw/rxe/rxe_comp.c +0
-0rxe_drop_ref (qp);return 0 ; }drivers/infiniband/sw/rxe/rxe_net.c +6
-1@@ -406,12 +406,17 @@ int rxe_send(struct rxe_pkt_info *pkt, struct sk_buff *skb)void rxe_loopback (struct sk_buff *skb) { +struct rxe_pkt_info *pkt =SKB_TO_PKT (skb); +if (skb->protocol ==htons (ETH_P_IP ))skb_pull (skb,sizeof (struct iphdr ));else skb_pull (skb,sizeof (struct ipv6hdr )); -rxe_rcv (skb); +if (WARN_ON (!ib_device_try_get (&pkt->rxe->ib_dev))) +kfree_skb (skb); +else +rxe_rcv (skb); } struct sk_buff *rxe_init_packet(struct rxe_dev *rxe, struct rxe_av *av,drivers/infiniband/sw/rxe/rxe_recv.c +4
-3@@ -299,8 +299,10 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb) err1:/* free skb if not consumed */ -kfree_skb (skb); -ib_device_put (&rxe->ib_dev); +if (unlikely (skb)) { +kfree_skb (skb); +ib_device_put (&rxe->ib_dev); + } }/** -- 2.27.0