4.4.268-rc1 review

This is the start of the stable review cycle for the 4.4.268 release. There are 32 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 28 Apr 2021 07:28:08 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.268-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.268-rc1

Mike Galbraith <[email protected]>
x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access

Kees Cook <[email protected]>
overflow.h: Add allocation size calculation helpers

Rasmus Villemoes <[email protected]>
compiler.h: enable builtin overflow checkers and add fallback code

John Paul Adrian Glaubitz <[email protected]>
ia64: tools: remove duplicate definition of ia64_mf() on ia64

Randy Dunlap <[email protected]>
ia64: fix discontig.c section mismatches

Wan Jiabing <[email protected]>
cavium/liquidio: Fix duplicate argument

Michael Brown <[email protected]>
xen-netback: Check for hotplug-status existence before watching

Vasily Gorbik <[email protected]>
s390/entry: save the caller of psw_idle

Tony Lindgren <[email protected]>
ARM: dts: Fix swapped mmc order for omap3

Zhang Yi <[email protected]>
ext4: correct error label in ext4_rename()

Anirudh Rayabharam <[email protected]>
net: hso: fix null-ptr-deref during tty device unregistration

Fredrik Strupe <[email protected]>
ARM: 9071/1: uprobes: Don't hook on thumb instructions

Jason Xing <[email protected]>
i40e: fix the panic when running bpf in xdpdrv mode

Christophe JAILLET <[email protected]>
net: davicom: Fix regulator not turned off on failed probe

Jolly Shah <[email protected]>
scsi: libsas: Reset num_scatter if libata marks qc as NODATA

Arnd Bergmann <[email protected]>
Input: i8042 - fix Pegatron C15B ID entry

Guenter Roeck <[email protected]>
pcnet32: Use pci_resource_len to validate PCI resource

Alexander Aring <[email protected]>
net: ieee802154: forbid monitor for add llsec seclevel

Alexander Aring <[email protected]>
net: ieee802154: stop dump llsec seclevels for monitors

Alexander Aring <[email protected]>
net: ieee802154: forbid monitor for add llsec devkey

Alexander Aring <[email protected]>
net: ieee802154: stop dump llsec devkeys for monitors

Alexander Aring <[email protected]>
net: ieee802154: forbid monitor for add llsec dev

Alexander Aring <[email protected]>
net: ieee802154: stop dump llsec devs for monitors

Alexander Aring <[email protected]>
net: ieee802154: stop dump llsec keys for monitors

Alexander Shiyan <[email protected]>
ASoC: fsl_esai: Fix TDM slot setup for I2S mode

Arnd Bergmann <[email protected]>
ARM: keystone: fix integer overflow warning

Tong Zhu <[email protected]>
neighbour: Disregard DEAD dst in neigh_update

Wang Qing <[email protected]>
arc: kernel: Return -EFAULT if copy_to_user() fails

Tony Lindgren <[email protected]>
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5

Andy Shevchenko <[email protected]>
dmaengine: dw: Make it dependent to HAS_IOMEM

Fabian Vogt <[email protected]>
Input: nspire-keypad - enable interrupts only when opened

Or Cohen <[email protected]>
net/sctp: fix race condition in sctp_destroy_sock

-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arc/kernel/signal.c                           |   4 +-
 arch/arm/boot/dts/omap3.dtsi                       |   3 +
 arch/arm/boot/dts/omap4.dtsi                       |   5 +
 arch/arm/boot/dts/omap5.dtsi                       |   5 +
 arch/arm/mach-keystone/keystone.c                  |   4 +-
 arch/arm/probes/uprobes/core.c                     |   4 +-
 arch/ia64/mm/discontig.c                           |   6 +-
 arch/s390/kernel/entry.S                           |   1 +
 arch/x86/kernel/crash.c                            |   3 +-
 drivers/dma/dw/Kconfig                             |   2 +
 drivers/input/keyboard/nspire-keypad.c             |  56 +++--
 drivers/input/serio/i8042-x86ia64io.h              |   1 +
 drivers/md/dm-table.c                              |  10 +-
 drivers/net/ethernet/amd/pcnet32.c                 |   5 +-
 drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h |   2 +-
 drivers/net/ethernet/davicom/dm9000.c              |   6 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |   6 +
 drivers/net/usb/hso.c                              |  33 +--
 drivers/net/xen-netback/xenbus.c                   |  12 +-
 drivers/scsi/libsas/sas_ata.c                      |   9 +-
 fs/ext4/namei.c                                    |   2 +-
 include/linux/compiler-clang.h                     |  14 ++
 include/linux/compiler-gcc.h                       |   4 +
 include/linux/compiler-intel.h                     |   4 +
 include/linux/overflow.h                           | 278 +++++++++++++++++++++
 net/core/neighbour.c                               |   2 +-
 net/ieee802154/nl802154.c                          |  29 +++
 net/sctp/socket.c                                  |  13 +-
 sound/soc/fsl/fsl_esai.c                           |   8 +-
 tools/arch/ia64/include/asm/barrier.h              |   3 -
 31 files changed, 445 insertions(+), 93 deletions(-)

From: Or Cohen <[email protected]>

commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b upstream.

If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock held and sp->do_auto_asconf is true, then an element is removed from the auto_asconf_splist without any proper locking.

This can happen in the following functions:
1. In sctp_accept, if sctp_sock_migrate fails.
2. In inet_create or inet6_create, if there is a bpf program attached to BPF_CGROUP_INET_SOCK_CREATE which denies creation of the sctp socket.

The bug is fixed by acquiring addr_wq_lock in sctp_destroy_sock instead of sctp_close.

This addresses CVE-2021-23133.

---
 net/sctp/socket.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

@@ -1567,11 +1567,9 @@ static void sctp_close(struct sock *sk,
 
 	/* Supposedly, no process has access to the socket, but
 	 * the net layers still may.
-	 * Also, sctp_destroy_sock() needs to be called with addr_wq_lock
-	 * held and that should be grabbed before socket lock.
 	 */
-	spin_lock_bh(&net->sctp.addr_wq_lock);
-	bh_lock_sock_nested(sk);
+	local_bh_disable();
+	bh_lock_sock(sk);
 
 	/* Hold the sock, since sk_common_release() will put sock_put()
 	 * and we have just a little more cleanup.

@@ -1580,7 +1578,7 @@ static void sctp_close(struct sock *sk,
 	sk_common_release(sk);
 
 	bh_unlock_sock(sk);
-	spin_unlock_bh(&net->sctp.addr_wq_lock);
+	local_bh_enable();
 
 	sock_put(sk);
 

@@ -4161,9 +4159,6 @@ static int sctp_init_sock(struct sock *s
 	sk_sockets_allocated_inc(sk);
 	sock_prot_inuse_add(net, sk->sk_prot, 1);
 
-	/* Nothing can fail after this block, otherwise
-	 * sctp_destroy_sock() will be called without addr_wq_lock held
-	 */
 	if (net->sctp.default_auto_asconf) {
 		spin_lock(&sock_net(sk)->sctp.addr_wq_lock);
 		list_add_tail(&sp->auto_asconf_list,

@@ -4198,7 +4193,9 @@ static void sctp_destroy_sock(struct soc
 
 	if (sp->do_auto_asconf) {
 		sp->do_auto_asconf = 0;
+		spin_lock_bh(&sock_net(sk)->sctp.addr_wq_lock);
 		list_del(&sp->auto_asconf_list);
+		spin_unlock_bh(&sock_net(sk)->sctp.addr_wq_lock);
 	}
 	sctp_endpoint_free(sp->ep);
 	local_bh_disable();

From: Fabian Vogt <[email protected]>

[ Upstream commit 69d5ff3e9e51e23d5d81bf48480aa5671be67a71 ]

The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working.

Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open.

---
 drivers/input/keyboard/nspire-keypad.c | 56 ++++++++++++++------------
 1 file changed, 31 insertions(+), 25 deletions(-)

index 7abfd34eb87e..bcec72367c1d 100644
@@ -96,9 +96,15 @@ static irqreturn_t nspire_keypad_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int nspire_keypad_chip_init(struct nspire_keypad *keypad)
+static int nspire_keypad_open(struct input_dev *input)
 {
+	struct nspire_keypad *keypad = input_get_drvdata(input);
 	unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles;
+	int error;
+
+	error = clk_prepare_enable(keypad->clk);
+	if (error)
+		return error;
 
 	cycles_per_us = (clk_get_rate(keypad->clk) / 1000000);
 	if (cycles_per_us == 0)

@@ -124,30 +130,6 @@ static int nspire_keypad_chip_init(struct nspire_keypad *keypad)
 	keypad->int_mask = 1 << 1;
 	writel(keypad->int_mask, keypad->reg_base + KEYPAD_INTMSK);
 
-	/* Disable GPIO interrupts to prevent hanging on touchpad */
-	/* Possibly used to detect touchpad events */
-	writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
-	/* Acknowledge existing interrupts */
-	writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
-
-	return 0;
-}
-
-static int nspire_keypad_open(struct input_dev *input)
-{
-	struct nspire_keypad *keypad = input_get_drvdata(input);
-	int error;
-
-	error = clk_prepare_enable(keypad->clk);
-	if (error)
-		return error;
-
-	error = nspire_keypad_chip_init(keypad);
-	if (error) {
-		clk_disable_unprepare(keypad->clk);
-		return error;
-	}
-
 	return 0;
 }
 

@@ -155,6 +137,11 @@ static void nspire_keypad_close(struct input_dev *input)
 {
 	struct nspire_keypad *keypad = input_get_drvdata(input);
 
+	/* Disable interrupts */
+	writel(0, keypad->reg_base + KEYPAD_INTMSK);
+	/* Acknowledge existing interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_INT);
+
 	clk_disable_unprepare(keypad->clk);
 }
 

@@ -215,6 +202,25 @@ static int nspire_keypad_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	error = clk_prepare_enable(keypad->clk);
+	if (error) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return error;
+	}
+
+	/* Disable interrupts */
+	writel(0, keypad->reg_base + KEYPAD_INTMSK);
+	/* Acknowledge existing interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_INT);
+
+	/* Disable GPIO interrupts to prevent hanging on touchpad */
+	/* Possibly used to detect touchpad events */
+	writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
+	/* Acknowledge existing GPIO interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
+
+	clk_disable_unprepare(keypad->clk);
+
 	input_set_drvdata(input, keypad);
 
 	input->id.bustype = BUS_HOST;

2.30.2

From: Andy Shevchenko <[email protected]>

[ Upstream commit 88cd1d6191b13689094310c2405394e4ce36d061 ]

Some architectures do not provide devm_*() APIs. Hence make the driver dependent on HAVE_IOMEM.

---
 drivers/dma/dw/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

index e00c9b022964..6ea3e95c287b 100644
@@ -11,6 +11,7 @@ config DW_DMAC_BIG_ENDIAN_IO
 
 config DW_DMAC
 	tristate "Synopsys DesignWare AHB DMA platform driver"
+	depends on HAS_IOMEM
 	select DW_DMAC_CORE
 	select DW_DMAC_BIG_ENDIAN_IO if AVR32
 	default y if CPU_AT32AP7000

@@ -21,6 +22,7 @@ config DW_DMAC
 config DW_DMAC_PCI
 	tristate "Synopsys DesignWare AHB DMA PCI driver"
 	depends on PCI
+	depends on HAS_IOMEM
 	select DW_DMAC_CORE
 	help
 	  Support the Synopsys DesignWare AHB DMA controller on the

2.30.2

From: Tony Lindgren <[email protected]>

[ Upstream commit 77335a040178a0456d4eabc8bf17a7ca3ee4a327 ]

Fix moving mmc devices with dts aliases as discussed on the lists. Without this we now have internal eMMC mmc1 show up as mmc2 compared to the earlier order of devices.

---
 arch/arm/boot/dts/omap4.dtsi | 5 +++++
 arch/arm/boot/dts/omap5.dtsi | 5 +++++
 2 files changed, 10 insertions(+)

index 8a5628c4b135..656e35ec037d 100644
@@ -21,6 +21,11 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;

index 4c04389dab32..b61ea6ca59b3 100644
@@ -26,6 +26,11 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;

2.30.2

From: Wang Qing <[email protected]>

[ Upstream commit 46e152186cd89d940b26726fff11eb3f4935b45a ]

The copy_to_user() function returns the number of bytes remaining to be copied, but we want to return -EFAULT if the copy doesn't complete.

---
 arch/arc/kernel/signal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 257b8699efde..639f39f39917 100644
@@ -97,7 +97,7 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 			     sizeof(sf->uc.uc_mcontext.regs.scratch));
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
 
-	return err;
+	return err ? -EFAULT : 0;
 }
 
 static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)

@@ -111,7 +111,7 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
 	if (err)
-		return err;
+		return -EFAULT;
 
 	set_current_blocked(&set);
 	regs->bta	= uregs.scratch.bta;

2.30.2

From: Tong Zhu <[email protected]>

[ Upstream commit d47ec7a0a7271dda08932d6208e4ab65ab0c987c ]

After a short network outage, the dst_entry is timed out and put in DST_OBSOLETE_DEAD. We are in this code because arp reply comes from this neighbour after network recovers. There is a potential race condition that dst_entry is still in DST_OBSOLETE_DEAD. With that, another neighbour lookup causes more harm than good.

In best case all packets in arp_queue are lost. This is counterproductive to the original goal of finding a better path for those packets.

I observed a worst case with 4.x kernel where a dst_entry in DST_OBSOLETE_DEAD state is associated with loopback net_device. It leads to an ethernet header with all zero addresses. A packet with all zero source MAC address is quite deadly with mac80211, ath9k and 802.11 block ack. It fails ieee80211_find_sta_by_ifaddr in ath9k (xmit.c). Ath9k flushes tx queue (ath_tx_complete_aggr). BAW (block ack window) is not updated. BAW logic is damaged and ath9k transmission is disabled.

---
 net/core/neighbour.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 40d33431bc58..17997902d316 100644
@@ -1234,7 +1234,7 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new,
 			 * we can reinject the packet there.
 			 */
 			n2 = NULL;
-			if (dst) {
+			if (dst && dst->obsolete != DST_OBSOLETE_DEAD) {
 				n2 = dst_neigh_lookup_skb(dst, skb);
 				if (n2)
 					n1 = n2;

2.30.2

From: Arnd Bergmann <[email protected]>

[ Upstream commit 844b85dda2f569943e1e018fdd63b6f7d1d6f08e ]

clang warns about an impossible condition when building with 32-bit phys_addr_t:

arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]

            mem_end   > KEYSTONE_HIGH_PHYS_END) {
            ~~~~~~~   ^ ~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
        if (mem_start < KEYSTONE_HIGH_PHYS_START ||
            ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~

Change the temporary variable to a fixed-size u64 to avoid the warning.

---
 arch/arm/mach-keystone/keystone.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index c279293f084c..0f1f5c4141d5 100644
@@ -71,7 +71,7 @@ static phys_addr_t keystone_virt_to_idmap(unsigned long x)
 static long long __init keystone_pv_fixup(void)
 {
 	long long offset;
-	phys_addr_t mem_start, mem_end;
+	u64 mem_start, mem_end;
 
 	mem_start = memblock_start_of_DRAM();
 	mem_end = memblock_end_of_DRAM();

@@ -84,7 +84,7 @@ static long long __init keystone_pv_fixup(void)
 	if (mem_start < KEYSTONE_HIGH_PHYS_START ||
 	    mem_end   > KEYSTONE_HIGH_PHYS_END) {
 		pr_crit("Invalid address space for memory (%08llx-%08llx)\n",
-		        (u64)mem_start, (u64)mem_end);
+		        mem_start, mem_end);
 		return 0;
 	}
 

2.30.2

From: Alexander Shiyan <[email protected]>

[ Upstream commit e7a48c710defa0e0fef54d42b7d9e4ab596e2761 ]

When using the driver in I2S TDM mode, the fsl_esai_startup() function rewrites the number of slots previously set by the fsl_esai_set_dai_tdm_slot() function to 2.
To fix this, let's use the saved slot count value or, if TDM is not used and the number of slots is not set, the driver will use the default value (2), which is set by fsl_esai_probe().

---
 sound/soc/fsl/fsl_esai.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

index 40075b9afb79..fad711a3f4b4 100644
@@ -488,11 +488,13 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 				   ESAI_SAICR_SYNC, esai_priv->synchronous ?
 				   ESAI_SAICR_SYNC : 0);
 
-		/* Set a default slot number -- 2 */
+		/* Set slots count */
 		regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR,
-				   ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(2));
+				   ESAI_xCCR_xDC_MASK,
+				   ESAI_xCCR_xDC(esai_priv->slots));
 		regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR,
-				   ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(2));
+				   ESAI_xCCR_xDC_MASK,
+				   ESAI_xCCR_xDC(esai_priv->slots));
 	}
 
 	return 0;

2.30.2

From: Alexander Aring <[email protected]>

[ Upstream commit fb3c5cdf88cd504ef11d59e8d656f4bc896c6922 ]

This patch stops dumping llsec keys for monitors which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors.

---
 net/ieee802154/nl802154.c | 5 +++++
 1 file changed, 5 insertions(+)

index c23c08f49c3c..78a0edf26854 100644
@@ -1481,6 +1481,11 @@ nl802154_dump_llsec_key(struct sk_buff *skb, struct netlink_callback *cb)
 	if (err)
 		return err;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR) {
+		err = skb->len;
+		goto out_err;
+	}
+
 	if (!wpan_dev->netdev) {
 		err = -EINVAL;
 		goto out_err;

2.30.2

From: Alexander Aring <[email protected]>

[ Upstream commit 5582d641e6740839c9b83efd1fbf9bcd00b6f5fc ]

This patch stops dumping llsec devs for monitors which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors.

---
 net/ieee802154/nl802154.c | 5 +++++
 1 file changed, 5 insertions(+)

index 78a0edf26854..e4ba6764c4a3 100644
@@ -1658,6 +1658,11 @@ nl802154_dump_llsec_dev(struct sk_buff *skb, struct netlink_callback *cb)
 	if (err)
 		return err;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR) {
+		err = skb->len;
+		goto out_err;
+	}
+
 	if (!wpan_dev->netdev) {
 		err = -EINVAL;
 		goto out_err;

2.30.2

From: Alexander Aring <[email protected]>

[ Upstream commit 5303f956b05a2886ff42890908156afaec0f95ac ]

This patch forbids to add llsec dev for monitor interfaces which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors.

---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

index e4ba6764c4a3..a602fd45e384 100644
@@ -1750,6 +1750,9 @@ static int nl802154_add_llsec_dev(struct sk_buff *skb, struct genl_info *info)
 	struct wpan_dev *wpan_dev = dev->ieee802154_ptr;
 	struct ieee802154_llsec_device dev_desc;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (ieee802154_llsec_parse_device(info->attrs[NL802154_ATTR_SEC_DEVICE],
 					  &dev_desc) < 0)
 		return -EINVAL;

2.30.2

From: Alexander Aring <[email protected]>

[ Upstream commit 080d1a57a94d93e70f84b7a360baa351388c574f ]

This patch stops dumping llsec devkeys for monitors which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors.

---
 net/ieee802154/nl802154.c | 5 +++++
 1 file changed, 5 insertions(+)

index a602fd45e384..19d0d22ff625 100644
@@ -1839,6 +1839,11 @@ nl802154_dump_llsec_devkey(struct sk_buff *skb, struct netlink_callback *cb)
 	if (err)
 		return err;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR) {
+		err = skb->len;
+		goto out_err;
+	}
+
 	if (!wpan_dev->netdev) {
 		err = -EINVAL;
 		goto out_err;

2.30.2

From: Alexander Aring <[email protected]>

[ Upstream commit a347b3b394868fef15b16f143719df56184be81d ]

This patch forbids to add llsec devkey for monitor interfaces which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors.

---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

index 19d0d22ff625..4ee080f3a41d 100644
@@ -1901,6 +1901,9 @@ static int nl802154_add_llsec_devkey(struct sk_buff *skb, struct genl_info *info
 	struct ieee802154_llsec_device_key key;
 	__le64 extended_addr;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (!info->attrs[NL802154_ATTR_SEC_DEVKEY] ||
 	    nla_parse_nested(attrs, NL802154_DEVKEY_ATTR_MAX,
 			     info->attrs[NL802154_ATTR_SEC_DEVKEY],

2.30.2

From: Alexander Aring <[email protected]>

[ Upstream commit 4c9b4f55ad1f5a4b6206ac4ea58f273126d21925 ]

This patch stops dumping llsec seclevels for monitors which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors.

---
 net/ieee802154/nl802154.c | 5 +++++
 1 file changed, 5 insertions(+)

index 4ee080f3a41d..f07a3027d66c 100644
@@ -2013,6 +2013,11 @@ nl802154_dump_llsec_seclevel(struct sk_buff *skb, struct netlink_callback *cb)
 	if (err)
 		return err;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR) {
+		err = skb->len;
+		goto out_err;
+	}
+
 	if (!wpan_dev->netdev) {
 		err = -EINVAL;
 		goto out_err;

2.30.2

From: Alexander Aring <[email protected]>

[ Upstream commit 9ec87e322428d4734ac647d1a8e507434086993d ]

This patch forbids to add llsec seclevel for monitor interfaces which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors.

---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

index f07a3027d66c..b2ff2f7329c3 100644
@@ -2103,6 +2103,9 @@ static int nl802154_add_llsec_seclevel(struct sk_buff *skb,
 	struct wpan_dev *wpan_dev = dev->ieee802154_ptr;
 	struct ieee802154_llsec_seclevel sl;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (llsec_parse_seclevel(info->attrs[NL802154_ATTR_SEC_LEVEL],
 				 &sl) < 0)
 		return -EINVAL;

2.30.2

From: Guenter Roeck <[email protected]>

[ Upstream commit 66c3f05ddc538ee796321210c906b6ae6fc0792a ]

pci_resource_start() is not a good indicator to determine if a PCI resource exists or not, since the resource may start at address 0. This is seen when trying to instantiate the driver in qemu for riscv32 or riscv64.

pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000001f]
...
pcnet32: card has no PCI IO resources, aborting

Use pci_resouce_len() instead.

---
 drivers/net/ethernet/amd/pcnet32.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

index 7ccebae9cb48..b305903c91c4 100644
@@ -1493,8 +1493,7 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	pci_set_master(pdev);
 
-	ioaddr = pci_resource_start(pdev, 0);
-	if (!ioaddr) {
+	if (!pci_resource_len(pdev, 0)) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
 			pr_err("card has no PCI IO resources, aborting\n");
 		return -ENODEV;

@@ -1506,6 +1505,8 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
 			pr_err("architecture does not support 32bit PCI busmaster DMA\n");
 		return err;
 	}
+
+	ioaddr = pci_resource_start(pdev, 0);
 	if (!request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci")) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
 			pr_err("io address range already allocated\n");

2.30.2

From: Arnd Bergmann <[email protected]>

commit daa58c8eec0a65ac8e2e77ff3ea8a233d8eec954 upstream.

The Zenbook Flip entry that was added overwrites a previous one because of a typo:

In file included from drivers/input/serio/i8042.h:23,

                 from drivers/input/serio/i8042.c:131:

drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init]
591 | .matches = {
| ^
drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches')

Add the missing separator between the two.

---
 drivers/input/serio/i8042-x86ia64io.h |    1 +
 1 file changed, 1 insertion(+)

@@ -579,6 +579,7 @@ static const struct dmi_system_id i8042_
 			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-CS"),
 		},
+	}, {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 			DMI_MATCH(DMI_CHASSIS_TYPE, "31"), /* Convertible Notebook */

From: Jolly Shah <[email protected]>

commit 176ddd89171ddcf661862d90c5d257877f7326d6 upstream.

When the cache_type for the SCSI device is changed, the SCSI layer issues a MODE_SELECT command. The caching mode details are communicated via a request buffer associated with the SCSI command with data direction set as DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata layer, as a part of generic initial setup, libata layer sets up the scatterlist for the command using the SCSI command (ata_scsi_qc_new()). This command is then translated by the libata layer into ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats this as a non-data command (ata_mselect_caching()), since it only needs an ATA taskfile to pass the caching on/off information to the device. It does not need the scatterlist that has been setup, so it does not perform dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it as a non-data command with a scatterlist. It cannot extract the correct DMA length since the scatterlist has not been mapped with dma_map_sg() for a DMA operation. When this partially constructed SAS task reaches pm80xx LLDD, it results in the following warning:

"pm80xx_chip_sata_req 6058: The sg list address start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff end_addr_low=0xffffffff has crossed 4G boundary"

Update libsas to handle ATA non-data commands separately so num_scatter and total_xfer_len remain 0.

---
 drivers/scsi/libsas/sas_ata.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

@@ -216,18 +216,17 @@ static unsigned int sas_ata_qc_issue(str
 		memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
 		task->total_xfer_len = qc->nbytes;
 		task->num_scatter = qc->n_elem;
+		task->data_dir = qc->dma_dir;
+	} else if (qc->tf.protocol == ATA_PROT_NODATA) {
+		task->data_dir = DMA_NONE;
 	} else {
 		for_each_sg(qc->sg, sg, qc->n_elem, si)
 			xfer += sg_dma_len(sg);
 
 		task->total_xfer_len = xfer;
 		task->num_scatter = si;
-	}
-
-	if (qc->tf.protocol == ATA_PROT_NODATA)
-		task->data_dir = DMA_NONE;
-	else
 		task->data_dir = qc->dma_dir;
+	}
 	task->scatter = qc->sg;
 	task->ata_task.retry_count = 1;
 	task->task_state_flags = SAS_TASK_STATE_PENDING;

From: Christophe JAILLET <[email protected]>

commit 31457db3750c0b0ed229d836f2609fdb8a5b790e upstream.

When the probe fails, we must disable the regulator that was previously enabled.

This patch is a follow-up to commit ac88c531a5b3
("net: davicom: Fix regulator not turned off on failed probe") which missed one case.

---
 drivers/net/ethernet/davicom/dm9000.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -1484,8 +1484,10 @@ dm9000_probe(struct platform_device *pde
 
 	/* Init network device */
 	ndev = alloc_etherdev(sizeof(struct board_info));
-	if (!ndev)
-		return -ENOMEM;
+	if (!ndev) {
+		ret = -ENOMEM;
+		goto out_regulator_disable;
+	}
 
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 

From: Jason Xing <[email protected]>

commit 4e39a072a6a0fc422ba7da5e4336bdc295d70211 upstream.

Fix this panic by adding more rules to calculate the value of @rss_size_max which could be used in allocating the queues when bpf is loaded, which, however, could cause the failure and then trigger the NULL pointer of vsi->rx_rings. Prio to this fix, the machine doesn't care about how many cpus are online and then allocates 256 queues on the machine with 32 cpus online actually.

Once the load of bpf begins, the log will go like this "failed to get tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI failed".

Thus, I attach the key information of the crash-log here.

BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e]
Call Trace:
[2160294.717292]  ? i40e_reconfig_rss_queues+0x170/0x170 [i40e]
[2160294.717666]  dev_xdp_install+0x4f/0x70
[2160294.718036]  dev_change_xdp_fd+0x11f/0x230
[2160294.718380]  ? dev_disable_lro+0xe0/0xe0
[2160294.718705]  do_setlink+0xac7/0xe70
[2160294.719035]  ? __nla_parse+0xed/0x120
[2160294.719365]  rtnl_newlink+0x73b/0x860

---
 drivers/net/ethernet/intel/i40e/i40e_main.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -8148,6 +8148,7 @@ static int i40e_sw_init(struct i40e_pf *
 {
 	int err = 0;
 	int size;
+	u16 pow;
 
 	pf->msg_enable = netif_msg_init(I40E_DEFAULT_MSG_ENABLE,
 				(NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK));

@@ -8182,6 +8183,11 @@ static int i40e_sw_init(struct i40e_pf *
 	pf->rss_table_size = pf->hw.func_caps.rss_table_size;
 	pf->rss_size_max = min_t(int, pf->rss_size_max,
 				 pf->hw.func_caps.num_tx_qp);
+
+	/* find the next higher power-of-2 of num cpus */
+	pow = roundup_pow_of_two(num_online_cpus());
+	pf->rss_size_max = min_t(int, pf->rss_size_max, pow);
+
 	if (pf->hw.func_caps.rss) {
 		pf->flags |= I40E_FLAG_RSS_ENABLED;
 		pf->rss_size = min_t(int, pf->rss_size_max, num_online_cpus());

From: Fredrik Strupe <[email protected]>

commit d2f7eca60b29006285d57c7035539e33300e89e5 upstream.

Since uprobes is not supported for thumb, check that the thumb bit is not set when matching the uprobes instruction hooks.

The Arm UDF instructions used for uprobes triggering (UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the same encoding as a pair of unallocated 32-bit thumb instructions (not UDF) when the condition code is 0b1111 (0xf). This in effect makes it possible to trigger the uprobes functionality from thumb, and at that using two unallocated instructions which are not permanently undefined.

---
 arch/arm/probes/uprobes/core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -207,7 +207,7 @@ unsigned long uprobe_get_swbp_addr(struc
 static struct undef_hook uprobes_arm_break_hook = {
 	.instr_mask	= 0x0fffffff,
 	.instr_val	= (UPROBE_SWBP_ARM_INSN & 0x0fffffff),
-	.cpsr_mask	= MODE_MASK,
+	.cpsr_mask	= (PSR_T_BIT | MODE_MASK),
 	.cpsr_val	= USR_MODE,
 	.fn		= uprobe_trap_handler,
 };

@@ -215,7 +215,7 @@ static struct undef_hook uprobes_arm_bre
 static struct undef_hook uprobes_arm_ss_hook = {
 	.instr_mask	= 0x0fffffff,
 	.instr_val	= (UPROBE_SS_ARM_INSN & 0x0fffffff),
-	.cpsr_mask	= MODE_MASK,
+	.cpsr_mask	= (PSR_T_BIT | MODE_MASK),
 	.cpsr_val	= USR_MODE,
 	.fn		= uprobe_trap_handler,
 };

From: Anirudh Rayabharam <[email protected]>

commit 8a12f8836145ffe37e9c8733dce18c22fb668b66 upstream

Multiple ttys try to claim the same the minor number causing a double unregistration of the same device. The first unregistration succeeds but the next one results in a null-ptr-deref.

The get_free_serial_index() function returns an available minor number but doesn't assign it immediately. The assignment is done by the caller later. But before this assignment, calls to get_free_serial_index() would return the same minor number.

Fix this by modifying get_free_serial_index to assign the minor number immediately after one is found to be and rename it to obtain_minor() to better reflect what it does. Similary, rename set_serial_by_index() to release_minor() and modify it to free up the minor number of the given hso_serial. Every obtain_minor() should have corresponding release_minor() call.

---
 drivers/net/usb/hso.c |   33 ++++++++++++---------------------
 1 file changed, 12 insertions(+), 21 deletions(-)

@@ -635,7 +635,7 @@ static struct hso_serial *get_serial_by_
 	return serial;
 }
 
-static int get_free_serial_index(void)
+static int obtain_minor(struct hso_serial *serial)
 {
 	int index;
 	unsigned long flags;

@@ -643,8 +643,10 @@ static int get_free_serial_index(void)
 	spin_lock_irqsave(&serial_table_lock, flags);
 	for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
 		if (serial_table[index] == NULL) {
+			serial_table[index] = serial->parent;
+			serial->minor = index;
 			spin_unlock_irqrestore(&serial_table_lock, flags);
-			return index;
+			return 0;
 		}
 	}
 	spin_unlock_irqrestore(&serial_table_lock, flags);

@@ -653,15 +655,12 @@ static int get_free_serial_index(void)
 	return -1;
 }
 
-static void set_serial_by_index(unsigned index, struct hso_serial *serial)
+static void release_minor(struct hso_serial *serial)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&serial_table_lock, flags);
-	if (serial)
-		serial_table[index] = serial->parent;
-	else
-		serial_table[index] = NULL;
+	serial_table[serial->minor] = NULL;
 	spin_unlock_irqrestore(&serial_table_lock, flags);
 }
 

@@ -2249,6 +2248,7 @@ static int hso_stop_serial_device(struct
 static void hso_serial_tty_unregister(struct hso_serial *serial)
 {
 	tty_unregister_device(tty_drv, serial->minor);
+	release_minor(serial);
 }
 
 static void hso_serial_common_free(struct hso_serial *serial)

@@ -2273,25 +2273,23 @@ static int hso_serial_common_create(stru
 				    int rx_size, int tx_size)
 {
 	struct device *dev;
-	int minor;
 	int i;
 
 	tty_port_init(&serial->port);
 
-	minor = get_free_serial_index();
-	if (minor < 0)
+	if (obtain_minor(serial))
 		goto exit2;
 
 	/* register our minor number */
 	serial->parent->dev = tty_port_register_device_attr(&serial->port,
-			tty_drv, minor, &serial->parent->interface->dev,
+			tty_drv, serial->minor, &serial->parent->interface->dev,
 			serial->parent, hso_serial_dev_groups);
-	if (IS_ERR(serial->parent->dev))
+	if (IS_ERR(serial->parent->dev)) {
+		release_minor(serial);
 		goto exit2;
+	}
 	dev = serial->parent->dev;
 
-	/* fill in specific data for later use */
-	serial->minor = minor;
 	serial->magic = HSO_SERIAL_MAGIC;
 	spin_lock_init(&serial->serial_lock);
 	serial->num_rx_urbs = num_urbs;

@@ -2692,9 +2690,6 @@ static struct hso_device *hso_create_bul
 
 	serial->write_data = hso_std_serial_write_data;
 
-	/* and record this serial */
-	set_serial_by_index(serial->minor, serial);
-
 	/* setup the proc dirs and files if needed */
 	hso_log_port(hso_dev);
 

@@ -2751,9 +2746,6 @@ struct hso_device *hso_create_mux_serial
 	serial->shared_int->ref_count++;
 	mutex_unlock(&serial->shared_int->shared_int_lock);
 
-	/* and record this serial */
-	set_serial_by_index(serial->minor, serial);
-
 	/* setup the proc dirs and files if needed */
 	hso_log_port(hso_dev);
 

@@ -3140,7 +3132,6 @@ static void hso_free_interface(struct us
 			cancel_work_sync(&serial_table[i]->async_get_intf);
 			hso_serial_tty_unregister(serial);
 			kref_put(&serial_table[i]->ref, hso_serial_ref_free);
-			set_serial_by_index(i, NULL);
 		}
 	}
 

We just got a regression report against this one. Perhaps better to hold off until that has been resolved.

	https://lore.kernel.org/r/[email protected]

Johan

Good point, I'll go drop this from everywhere.

greg k-h

From: Zhang Yi <[email protected]>

The backport of upstream patch 5dccdc5a1916 ("ext4: do not iput inode under running transaction in ext4_rename()") introduced a regression on the stable kernels 4.14 and older. One of the end_rename error label was forgetting to change to release_bh, which may trigger below bug.

 ------------[ cut here ]------------
 kernel BUG at /home/zhangyi/hulk-4.4/fs/ext4/ext4_jbd2.c:30!
 ...
 Call Trace:
  [<ffffffff8b4207b2>] ext4_rename+0x9e2/0x10c0
  [<ffffffff8b331324>] ? unlazy_walk+0x124/0x2a0
  [<ffffffff8b420eb5>] ext4_rename2+0x25/0x60
  [<ffffffff8b335104>] vfs_rename+0x3a4/0xed0
  [<ffffffff8b33a7ad>] SYSC_renameat2+0x57d/0x7f0
  [<ffffffff8b33c119>] SyS_renameat+0x19/0x30
  [<ffffffff8bc57bb8>] entry_SYSCALL_64_fastpath+0x18/0x78
 ...
 ---[ end trace 75346ce7c76b9f06 ]---

---
 fs/ext4/namei.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -3561,7 +3561,7 @@ static int ext4_rename(struct inode *old
 	    !ext4_is_child_context_consistent_with_parent(new.dir,
 							  old.inode)) {
 		retval = -EXDEV;
-		goto end_rename;
+		goto release_bh;
 	}
 
 	new.bh = ext4_find_entry(new.dir, &new.dentry->d_name,

From: Tony Lindgren <[email protected]>

[ Upstream commit a1ebdb3741993f853865d1bd8f77881916ad53a7 ]

Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped around with commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4").

Let's fix the issue with aliases as discussed on the mailing lists. While the mmc aliases should be board specific, let's first fix the issue with minimal changes.

---
 arch/arm/boot/dts/omap3.dtsi | 3 +++
 1 file changed, 3 insertions(+)

index 8a2b25332b8c..a2e41d79e829 100644
@@ -22,6 +22,9 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;

2.30.2

From: Vasily Gorbik <[email protected]>

[ Upstream commit a994eddb947ea9ebb7b14d9a1267001699f0a136 ]

Currently psw_idle does not allocate a stack frame and does not save its r14 and r15 into the save area. Even though this is valid from call ABI point of view, because psw_idle does not make any calls explicitly, in reality psw_idle is an entry point for controlled transition into serving interrupts. So, in practice, psw_idle stack frame is analyzed during stack unwinding. Depending on build options that r14 slot in the save area of psw_idle might either contain a value saved by previous sibling call or complete garbage.

[task 0000038000003c28] do_ext_irq+0xd6/0x160
[task 0000038000003c78] ext_int_handler+0xba/0xe8
[task *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs

 ([task    0000038000003dd8] 0x0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

So, to make a stacktrace nicer and actually point for the real caller of psw_idle in this frequently occurring case, make psw_idle save its r14.

[task 0000038000003c28] do_ext_irq+0xd6/0x160
[task 0000038000003c78] ext_int_handler+0xba/0xe8
[task *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs

 ([task    0000038000003dd8] arch_cpu_idle+0x3c/0xd0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

---
 arch/s390/kernel/entry.S | 1 +
 1 file changed, 1 insertion(+)

index 4cad1adff16b..d43f18b3d42c 100644
@@ -889,6 +889,7 @@ ENTRY(ext_int_handler)
  * Load idle PSW. The second "half" of this function is in .Lcleanup_idle.
  */
 ENTRY(psw_idle)
+	stg	%r14,(__SF_GPRS+8*8)(%r15)
 	stg	%r3,__SF_EMPTY(%r15)
 	larl	%r1,.Lpsw_idle_lpsw+4
 	stg	%r1,__SF_EMPTY+8(%r15)

2.30.2

From: Michael Brown <[email protected]>

[ Upstream commit 2afeec08ab5c86ae21952151f726bfe184f6b23d ]

The logic in connect() is currently written with the assumption that xenbus_watch_pathfmt() will return an error for a node that does not exist. This assumption is incorrect: xenstore does allow a watch to be registered for a nonexistent node (and will send notifications should the node be subsequently created).

As of commit 1f2565780 ("xen-netback: remove 'hotplug-status' once it has served its purpose"), this leads to a failure when a domU transitions into XenbusStateConnected more than once. On the first domU transition into Connected state, the "hotplug-status" node will be deleted by the hotplug_status_changed() callback in dom0. On the second or subsequent domU transition into Connected state, the hotplug_status_changed() callback will therefore never be invoked, and so the backend will remain stuck in InitWait.

This failure prevents scenarios such as reloading the xen-netfront module within a domU, or booting a domU via iPXE. There is unfortunately no way for the domU to work around this dom0 bug.

Fix by explicitly checking for existence of the "hotplug-status" node, thereby creating the behaviour that was previously assumed to exist.

---
 drivers/net/xen-netback/xenbus.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

index 21c8e2720b40..683fd8560f2b 100644
@@ -849,11 +849,15 @@ static void connect(struct backend_info *be)
 	xenvif_carrier_on(be->vif);
 
 	unregister_hotplug_status_watch(be);
-	err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL,
-				   hotplug_status_changed,
-				   "%s/%s", dev->nodename, "hotplug-status");
-	if (!err)
+	if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) {
+		err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch,
+					   NULL, hotplug_status_changed,
+					   "%s/%s", dev->nodename,
+					   "hotplug-status");
+		if (err)
+			goto err;
 		be->have_hotplug_status_watch = 1;
+	}
 
 	netif_tx_wake_all_queues(be->vif->dev);
 

2.30.2

From: Wan Jiabing <[email protected]>

[ Upstream commit 416dcc5ce9d2a810477171c62ffa061a98f87367 ]

Fix the following coccicheck warning:

./drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h:413:6-28:
duplicated argument to & or |

The CN6XXX_INTR_M1UPB0_ERR here is duplicate. Here should be CN6XXX_INTR_M1UNB0_ERR.

---
 drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 5e3aff242ad3..3ab84d18ad3a 100644
@@ -417,7 +417,7 @@
 	   | CN6XXX_INTR_M0UNWI_ERR             \
 	   | CN6XXX_INTR_M1UPB0_ERR             \
 	   | CN6XXX_INTR_M1UPWI_ERR             \
-	   | CN6XXX_INTR_M1UPB0_ERR             \
+	   | CN6XXX_INTR_M1UNB0_ERR             \
 	   | CN6XXX_INTR_M1UNWI_ERR             \
 	   | CN6XXX_INTR_INSTR_DB_OF_ERR        \
 	   | CN6XXX_INTR_SLIST_DB_OF_ERR        \

2.30.2

From: Randy Dunlap <[email protected]>

[ Upstream commit e2af9da4f867a1a54f1252bf3abc1a5c63951778 ]

Fix IA64 discontig.c Section mismatch warnings.

When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions computer_pernodesize() and scatter_node_data() should not be marked as __meminit because they are needed after init, on any memory hotplug event. Also, early_nr_cpus_node() is called by compute_pernodesize(), so early_nr_cpus_node() cannot be __meminit either.

WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize() The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.

WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data() The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.

WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node() The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.

---
 arch/ia64/mm/discontig.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 878626805369..3b0c892953ab 100644
@@ -99,7 +99,7 @@ static int __init build_node_maps(unsigned long start, unsigned long len,
  * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
  * called yet.  Note that node 0 will also count all non-existent cpus.
  */
-static int __meminit early_nr_cpus_node(int node)
+static int early_nr_cpus_node(int node)
 {
 	int cpu, n = 0;
 

@@ -114,7 +114,7 @@ static int __meminit early_nr_cpus_node(int node)
  * compute_pernodesize - compute size of pernode data
  * @node: the node id.
  */
-static unsigned long __meminit compute_pernodesize(int node)
+static unsigned long compute_pernodesize(int node)
 {
 	unsigned long pernodesize = 0, cpus;
 

@@ -411,7 +411,7 @@ static void __init reserve_pernode_space(void)
 	}
 }
 
-static void __meminit scatter_node_data(void)
+static void scatter_node_data(void)
 {
 	pg_data_t **dst;
 	int node;

2.30.2

From: John Paul Adrian Glaubitz <[email protected]>

[ Upstream commit f4bf09dc3aaa4b07cd15630f2023f68cb2668809 ]

The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf failing to build:

CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
In file included from /usr/src/linux/tools/include/asm/barrier.h:24,

                   from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
                   from libbpf.c:37:
  /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
     43 | #define ia64_mf()       asm volatile ("mf" ::: "memory")
        |
  In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
                   from /usr/include/ia64-linux-gnu/asm/swab.h:11,
                   from /usr/include/linux/swab.h:8,
                   from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
                   from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
                   from libbpf.c:36:
  /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
    382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
        |

cc1: all warnings being treated as errors

Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.

---
 tools/arch/ia64/include/asm/barrier.h |    3 ---
 1 file changed, 3 deletions(-)

@@ -38,9 +38,6 @@
  * sequential memory pages only.
  */
 
-/* XXX From arch/ia64/include/uapi/asm/gcc_intrin.h */
-#define ia64_mf()       asm volatile ("mf" ::: "memory")
-
 #define mb()		ia64_mf()
 #define rmb()		mb()
 #define wmb()		mb()

From: Rasmus Villemoes <[email protected]>

commit f0907827a8a9152aedac2833ed1b674a7b2a44f2 upstream.

This adds wrappers for the __builtin overflow checkers present in gcc 5.1+ as well as fallback implementations for earlier compilers. It's not that easy to implement the fully generic __builtin_X_overflow(T1 a, T2 b, T3 *d) in macros, so the fallback code assumes that T1, T2 and T3 are the same. We obviously don't want the wrappers to have different semantics depending on $GCC_VERSION, so we also insist on that even when using the builtins.

There are a few problems with the 'a+b < a' idiom for checking for
overflow: For signed types, it relies on undefined behaviour and is not actually complete (it doesn't check underflow;
e.g. INT_MIN+INT_MIN == 0 isn't caught). Due to type promotion it is wrong for all types (signed and unsigned) narrower than int. Similarly, when a and b does not have the same type, there are subtle cases like

u32 a;

  if (a + sizeof(foo) < a)
    return -EOVERFLOW;
  a += sizeof(foo);

where the test is always false on 64 bit platforms. Add to that that it is not always possible to determine the types involved at a glance.

The new overflow.h is somewhat bulky, but that's mostly a result of trying to be type-generic, complete (e.g. catching not only overflow but also signed underflow) and not relying on undefined behaviour.

Linus is of course right [1] that for unsigned subtraction a-b, the right way to check for overflow (underflow) is "b > a" and not "__builtin_sub_overflow(a, b, &d)", but that's just one out of six cases covered here, and included mostly for completeness.

So is it worth it? I think it is, if nothing else for the documentation value of seeing

  if (check_add_overflow(a, b, &d))
    return -EGOAWAY;
  do_stuff_with(d);

instead of the open-coded (and possibly wrong and/or incomplete and/or UBsan-tickling)

  if (a+b < a)
    return -EGOAWAY;
  do_stuff_with(a+b);

While gcc does recognize the 'a+b < a' idiom for testing unsigned add overflow, it doesn't do nearly as good for unsigned multiplication (there's also no single well-established idiom). So using check_mul_overflow in kcalloc and friends may also make gcc generate slightly better code.

[1] https://lkml.org/lkml/2015/11/2/658

---
 include/linux/compiler-clang.h |   14 ++
 include/linux/compiler-gcc.h   |    4 
 include/linux/compiler-intel.h |    4 
 include/linux/overflow.h       |  205 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 227 insertions(+)
 create mode 100644 include/linux/overflow.h

@@ -15,3 +15,17 @@
  * with any version that can compile the kernel
  */
 #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
+
+/*
+ * Not all versions of clang implement the the type-generic versions
+ * of the builtin overflow checkers. Fortunately, clang implements
+ * __has_builtin allowing us to avoid awkward version
+ * checks. Unfortunately, we don't know which version of gcc clang
+ * pretends to be, so the macro may or may not be defined.
+ */
+#undef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW
+#if __has_builtin(__builtin_mul_overflow) && \
+    __has_builtin(__builtin_add_overflow) && \
+    __has_builtin(__builtin_sub_overflow)
+#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
+#endif

@@ -321,3 +321,7 @@
  * code
  */
 #define uninitialized_var(x) x = x
+
+#if GCC_VERSION >= 50100
+#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
+#endif

@@ -43,3 +43,7 @@
 #define __builtin_bswap16 _bswap16
 #endif
 
+/*
+ * icc defines __GNUC__, but does not implement the builtin overflow checkers.
+ */
+#undef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW

From: Kees Cook <[email protected]>

commit 610b15c50e86eb1e4b77274fabcaea29ac72d6a8 upstream.

In preparation for replacing unchecked overflows for memory allocations, this creates helpers for the 3 most common calculations:

array_size(a, b): 2-dimensional array
array3_size(a, b, c): 3-dimensional array
struct_size(ptr, member, n): struct followed by n-many trailing members

Each of these return SIZE_MAX on overflow instead of wrapping around.

(Additionally renames a variable named "array_size" to avoid future collision.)

---
 drivers/md/dm-table.c    |   10 +++---
 include/linux/overflow.h |   73 +++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+), 5 deletions(-)

@@ -516,14 +516,14 @@ static int adjoin(struct dm_table *table
  * On the other hand, dm-switch needs to process bulk data using messages and
  * excessive use of GFP_NOIO could cause trouble.
  */
-static char **realloc_argv(unsigned *array_size, char **old_argv)
+static char **realloc_argv(unsigned *size, char **old_argv)
 {
 	char **argv;
 	unsigned new_size;
 	gfp_t gfp;
 
-	if (*array_size) {
-		new_size = *array_size * 2;
+	if (*size) {
+		new_size = *size * 2;
 		gfp = GFP_KERNEL;
 	} else {
 		new_size = 8;

@@ -531,8 +531,8 @@ static char **realloc_argv(unsigned *arr
 	}
 	argv = kmalloc(new_size * sizeof(*argv), gfp);
 	if (argv) {
-		memcpy(argv, old_argv, *array_size * sizeof(*argv));
-		*array_size = new_size;
+		memcpy(argv, old_argv, *size * sizeof(*argv));
+		*size = new_size;
 	}
 
 	kfree(old_argv);

From: Mike Galbraith <[email protected]>

commit 5849cdf8c120e3979c57d34be55b92d90a77a47e upstream.

Commit in Fixes: added support for kexec-ing a kernel on panic using a new system call. As part of it, it does prepare a memory map for the new kernel.

However, while doing so, it wrongly accesses memory it has not
allocated: it accesses the first element of the cmem->ranges[] array in memmap_exclude_ranges() but it has not allocated the memory for it in crash_setup_memmap_entries(). As KASAN reports:

  BUG: KASAN: vmalloc-out-of-bounds in crash_setup_memmap_entries+0x17e/0x3a0
  Write of size 8 at addr ffffc90000426008 by task kexec/1187

  (gdb) list *crash_setup_memmap_entries+0x17e
  0xffffffff8107cafe is in crash_setup_memmap_entries (arch/x86/kernel/crash.c:322).
  317                                      unsigned long long mend)
  318     {
  319             unsigned long start, end;
  320
  321             cmem->ranges[0].start = mstart;
  322             cmem->ranges[0].end = mend;
  323             cmem->nr_ranges = 1;
  324
  325             /* Exclude elf header region */
  326             start = image->arch.elf_load_addr;
  (gdb)

Make sure the ranges array becomes a single element allocated.

[ bp: Write a proper commit message. ]

---
 arch/x86/kernel/crash.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -23,6 +23,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/overflow.h>
 
 #include <asm/processor.h>
 #include <asm/hardirq.h>

@@ -572,7 +573,7 @@ int crash_setup_memmap_entries(struct ki
 	struct crash_memmap_data cmd;
 	struct crash_mem *cmem;
 
-	cmem = vzalloc(sizeof(struct crash_mem));
+	cmem = vzalloc(struct_size(cmem, ranges, 1));
 	if (!cmem)
 		return -ENOMEM;
 

Hi!

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y

Best regards,
Pavel

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

All tests passing for Tegra ...

Test results for stable-v4.4:

    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    30 tests:	30 pass, 0 fail

Linux version: 4.4.268-rc1-g78d632f91b0e
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra30-cardhu-a04

Jon

Build results:

	total: 160 pass: 160 fail: 0
Qemu test results:
	total: 329 pass: 329 fail: 0

Guenter

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.4.268-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.4.y
* git commit: 78d632f91b0e9c213e8a76367900e6f37e2c81e7
* git describe: v4.4.267-33-g78d632f91b0e
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.267-33-g78d632f91b0e

## No regressions (compared to v4.4.267-24-g6efef630b70b)

## No fixes (compared to v4.4.267-24-g6efef630b70b)

## Test result summary
total: 45230, pass: 36002, fail: 1238, skip: 7746, xfail: 244,

## Build Summary
* arm: 96 total, 96 passed, 0 failed
* arm64: 23 total, 23 passed, 0 failed
* i386: 13 total, 13 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 36 total, 36 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 14 total, 13 passed, 1 failed

## Test suites summary
* fwts
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org