New: kswapd Regression as of 5.13-rc3, eats 100% of CPU for no reason
A message that is not in the archive (sent off-list or not yet received): [email protected]/
Andrew Morton
maintainer(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 58 lines · On Mon, 31 May 2021 18:09:38 +0000 [email protected] wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=213299
Bug ID: 213299
Summary: kswapd Regression as of 5.13-rc3, eats 100% of CPU for
no reason
Product: Memory Management
Version: 2.5
Kernel Version: 5.13-rc3, 5.13-rc4
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Slab Allocator
Assignee: [email protected]
Reporter: [email protected]
Regression: NoI've seen reports of kswapd0 eating up CPU, but this doesn't fit those descriptions.
- The bug is not present on 5.12.
- It happens immediately on boot, CPU usage goes to 100 on all 24 threads of a
Ryzen 5900X- The only solution is to run
sudo pkill -9 kswapd0. swapoff does nothing,
nor doesecho 1 > /proc/sys/vm/drop_caches.- I have a swap partition and 32GB of RAM. Like I said, this happens on boot,
so nowhere *near* 32GB of RAM is being taken. And no swap is being used. This is clearly an error in kswapd, it's like it goes completely bonkers. 5.13-rc2 didn't have it, nor did rc1, and 5.12 doesn't have it either.System Info:
Arch Linux
Kernel: 5.13-rc3, 5.13-rc4
Ryzen 9 5900X
32GB DDR4-3600
40GB Swap partition on SSDsudo dmesg | grep -i swap only gives these three lines so far (after already killing the process and about 5 min. after boot):
[ 0.093277] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.334800] zswap: loaded using pool lz4/z3fold [ 2.941371] Adding 41502716k swap on /dev/sdb3. Priority:-2 extents:1across:41502716k SSFS
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.
Quoted 39 lines · Andrew Morton
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 34 lines · On Mon, 31 May 2021 18:09:38 +0000 [email protected] wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=213299
Bug ID: 213299
Summary: kswapd Regression as of 5.13-rc3, eats 100% of CPU for
no reason
Product: Memory Management
Version: 2.5
Kernel Version: 5.13-rc3, 5.13-rc4
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Slab Allocator
Assignee: [email protected]
Reporter: [email protected]
Regression: NoI've seen reports of kswapd0 eating up CPU, but this doesn't fit those descriptions.
- The bug is not present on 5.12.
- It happens immediately on boot, CPU usage goes to 100 on all 24 threads of a
Ryzen 5900X- The only solution is to run
sudo pkill -9 kswapd0. swapoff does nothing,
nor doesecho 1 > /proc/sys/vm/drop_caches.- I have a swap partition and 32GB of RAM. Like I said, this happens on boot,
so nowhere *near* 32GB of RAM is being taken. And no swap is being used. This is clearly an error in kswapd, it's like it goes completely bonkers. 5.13-rc2 didn't have it, nor did rc1, and 5.12 doesn't have it either.
Does it trigger (or not trigger) reliably with these version?
There aren't any obvious mm changes in that window. If it reproduces reliably during boot, can you please git bisect it?
Can you also please show /proc/pid/stack for the offending kswapd, and what your watermark settings are?