Skip to contentSkip to conversation

SUNIX SDC PCIe multi-function card support

PATCH In review Moriis Ku 2 participants 2 messages Jun 25, 2021 – Jun 28, 2021

lore
Share & tools
lore

Moriis Ku

author
#0 lore raw

PATCH 1/1 SUNIX SDC PCIe multi-function card support

From: Morris Ku <[email protected]>

Add support for SUNIX SDC PCIe multi-function card

Cc Jason Lee <[email protected]>
Cc Taian Chen <[email protected]>
Cc Morris Ku <[email protected]>
Cc Edward Lee <[email protected]>
---
 Kconfig | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
Kconfig +14 -0
index b74efa4..0bab573 100644
@@ -2156,5 +2156,19 @@ config MFD_INTEL_M10_BMC
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_SUNIX_SDC
+	tristate
+	select MFD_CORE
+	select SERIAL_8250_SDC
+	select CAN_SX2010
+
+config MFD_SUNIX_SDC_PCI
+	tristate "SUNIX SDC PCIe multi-function card support"
+	select MFD_SUNIX_SDC
+	depends on X86 && PCI
+	help
+	  Selecting this option will add support for SUNIX SDC PCIe
+	  multi-function card.
+
 endmenu
 endif
Signature · 1 line
2.20.1
#1 lore raw
Quoted 3 lines · Moriis Ku

From: Morris Ku <[email protected]>

Add support for SUNIX SDC PCIe multi-function card

All of these patches should be merged into a single patch.

Please re-submit before a conduct a full review.

Quoted 4 lines
Cc Jason Lee <[email protected]>
Cc Taian Chen <[email protected]>
Cc Morris Ku <[email protected]>
Cc Edward Lee <[email protected]>

Cc: Should not be used to mail internal personalities who are not authors, maintainers or reviewers (listed in MAINTAINERS).

Quoted 3 lines
---
 Kconfig | 14 ++++++++++++++

Diffs should be taken from the top directory:

drivers/mfd/Kconfig

Quoted 25 lines
 1 file changed, 14 insertions(+)
Kconfig +14 -0
index b74efa4..0bab573 100644
@@ -2156,5 +2156,19 @@ config MFD_INTEL_M10_BMC
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_SUNIX_SDC
+	tristate
+	select MFD_CORE
+	select SERIAL_8250_SDC
+	select CAN_SX2010
+
+config MFD_SUNIX_SDC_PCI
+	tristate "SUNIX SDC PCIe multi-function card support"
+	select MFD_SUNIX_SDC
+	depends on X86 && PCI
+	help
+	  Selecting this option will add support for SUNIX SDC PCIe
+	  multi-function card.
+
 endmenu
 endif
Signature · 4 lines
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog