Restricted DMA
Subsystems (14)
v15 cover Restricted DMA
This series implements mitigations for lack of DMA access control on systems without an IOMMU, which could result in the DMA accessing the system memory at unexpected times and/or unexpected addresses, possibly leading to data leakage or corruption.
For example, we plan to use the PCI-e bus for Wi-Fi and that PCI-e bus is not behind an IOMMU. As PCI-e, by design, gives the device full access to system memory, a vulnerability in the Wi-Fi firmware could easily escalate to a full system exploit (remote wifi exploits: [1a], [1b] that shows a full chain of exploits; [2], [3]).
To mitigate the security concerns, we introduce restricted DMA. Restricted DMA utilizes the existing swiotlb to bounce streaming DMA in and out of a specially allocated region and does memory allocation from the same region. The feature on its own provides a basic level of protection against the DMA overwriting buffer contents at unexpected times. However, to protect against general data leakage and system memory corruption, the system needs to provide a way to restrict the DMA to a predefined memory region (this is usually done at firmware level, e.g. MPU in ATF on some ARM platforms [4]).
[1a] https://googleprojectzero.blogspot.com/2017/04/over-air-exploiting-broadcoms-wi-fi_4.html
[1b] https://googleprojectzero.blogspot.com/2017/04/over-air-exploiting-broadcoms-wi-fi_11.html
[2] https://blade.tencent.com/en/advisories/qualpwn/
[3] https://www.bleepingcomputer.com/news/security/vulnerabilities-found-in-highly-popular-firmware-for-wifi-chips/
[4] https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8183/drivers/emi_mpu/emi_mpu.c#L132
v15:
- Apply Will's diff (https://lore.kernel.org/patchwork/patch/1448957/#1647521)
to fix the crash reported by Qian.
- Add Stefano's Acked-by tag for patch 01/12 from v14
v14:
- Move set_memory_decrypted before swiotlb_init_io_tlb_mem (patch 01/12, 10,12)
- Add Stefano's Acked-by tag from v13
https://lore.kernel.org/patchwork/cover/1448954/
v13:
- Fix xen-swiotlb issues
- memset in patch 01/12
- is_swiotlb_force_bounce in patch 06/12
- Fix the dts example typo in reserved-memory.txt
- Add Stefano and Will's Tested-by tag from v12
https://lore.kernel.org/patchwork/cover/1448001/
v12:
Split is_dev_swiotlb_force into is_swiotlb_force_bounce (patch 06/12) and is_swiotlb_for_alloc (patch 09/12)
https://lore.kernel.org/patchwork/cover/1447254/
v11:
- Rebase against swiotlb devel/for-linus-5.14
- s/mempry/memory/g
- exchange the order of patch 09/12 and 10/12
https://lore.kernel.org/patchwork/cover/1447216/
v10:
Address the comments in v9 to
- fix the dev->dma_io_tlb_mem assignment
- propagate swiotlb_force setting into io_tlb_default_mem->force
- move set_memory_decrypted out of swiotlb_init_io_tlb_mem
- move debugfs_dir declaration into the main CONFIG_DEBUG_FS block
- add swiotlb_ prefix to find_slots and release_slots
- merge the 3 alloc/free related patches
- move the CONFIG_DMA_RESTRICTED_POOL later
https://lore.kernel.org/patchwork/cover/1446882/
v9:
Address the comments in v7 to
- set swiotlb active pool to dev->dma_io_tlb_mem
- get rid of get_io_tlb_mem
- dig out the device struct for is_swiotlb_active
- move debugfs_create_dir out of swiotlb_create_debugfs
- do set_memory_decrypted conditionally in swiotlb_init_io_tlb_mem
- use IS_ENABLED in kernel/dma/direct.c
- fix redefinition of 'of_dma_set_restricted_buffer'
https://lore.kernel.org/patchwork/cover/1445081/
v8:
- Fix reserved-memory.txt and add the reg property in example.
- Fix sizeof for of_property_count_elems_of_size in drivers/of/address.c#of_dma_set_restricted_buffer.
- Apply Will's suggestion to try the OF node having DMA configuration in drivers/of/address.c#of_dma_set_restricted_buffer.
- Fix typo in the comment of drivers/of/address.c#of_dma_set_restricted_buffer.
- Add error message for PageHighMem in kernel/dma/swiotlb.c#rmem_swiotlb_device_init and move it to rmem_swiotlb_setup.
- Fix the message string in rmem_swiotlb_setup.
https://lore.kernel.org/patchwork/cover/1437112/
v7:
Fix debugfs, PageHighMem and comment style in rmem_swiotlb_device_init
https://lore.kernel.org/patchwork/cover/1431031/
v6:
Address the comments in v5
https://lore.kernel.org/patchwork/cover/1423201/
v5:
Rebase on latest linux-next
https://lore.kernel.org/patchwork/cover/1416899/
v4:
- Fix spinlock bad magic
- Use rmem->name for debugfs entry
- Address the comments in v3
https://lore.kernel.org/patchwork/cover/1378113/
v3:
Using only one reserved memory region for both streaming DMA and memory allocation.
https://lore.kernel.org/patchwork/cover/1360992/
v2:
Building on top of swiotlb.
https://lore.kernel.org/patchwork/cover/1280705/
v1:
Using dma_map_ops.
https://lore.kernel.org/patchwork/cover/1271660/
Claire Chang (12):
swiotlb: Refactor swiotlb init functions
swiotlb: Refactor swiotlb_create_debugfs
swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used
swiotlb: Update is_swiotlb_buffer to add a struct device argument
swiotlb: Update is_swiotlb_active to add a struct device argument
swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
swiotlb: Move alloc_size to swiotlb_find_slots
swiotlb: Refactor swiotlb_tbl_unmap_single
swiotlb: Add restricted DMA alloc/free support
swiotlb: Add restricted DMA pool initialization
dt-bindings: of: Add restricted DMA pool
of: Add plumbing for restricted DMA pool
.../reserved-memory/reserved-memory.txt | 36 ++- drivers/base/core.c | 4 + drivers/gpu/drm/i915/gem/i915_gem_internal.c | 2 +- drivers/gpu/drm/nouveau/nouveau_ttm.c | 2 +- drivers/iommu/dma-iommu.c | 12 +- drivers/of/address.c | 33 +++ drivers/of/device.c | 3 + drivers/of/of_private.h | 6 + drivers/pci/xen-pcifront.c | 2 +- drivers/xen/swiotlb-xen.c | 4 +- include/linux/device.h | 4 + include/linux/swiotlb.h | 53 +++- kernel/dma/Kconfig | 14 + kernel/dma/direct.c | 59 ++-- kernel/dma/direct.h | 8 +- kernel/dma/swiotlb.c | 251 +++++++++++++----- 16 files changed, 390 insertions(+), 103 deletions(-)
Signature · 6 lines
2.32.0.288.g62a8d224e6-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 1/12 swiotlb: Refactor swiotlb init functions
Add a new function, swiotlb_init_io_tlb_mem, for the io_tlb_mem struct initialization to make the code reusable.
--- kernel/dma/swiotlb.c | 50 ++++++++++++++++++++++---------------------- 1 file changed, 25 insertions(+), 25 deletions(-)
kernel/dma/swiotlb.c +25 -25
@@ -168,9 +168,28 @@ void __init swiotlb_update_mem_attributes(void)memset (vaddr,0 , bytes); } -int __init swiotlb_init_with_tbl (char *tlb,unsigned long nslabs,int verbose) +static void swiotlb_init_io_tlb_mem (struct io_tlb_mem *mem,phys_addr_t start, +unsigned long nslabs,bool late_alloc) { +void *vaddr =phys_to_virt (start);unsigned long bytes = nslabs <<IO_TLB_SHIFT , i; + + mem->nslabs = nslabs; + mem->start = start; + mem->end = mem->start + bytes; + mem->index =0 ; + mem->late_alloc = late_alloc; +spin_lock_init (&mem->lock); +for (i =0 ; i < mem->nslabs; i++) { + mem->slots[i].list =IO_TLB_SEGSIZE -io_tlb_offset (i); + mem->slots[i].orig_addr =INVALID_PHYS_ADDR ; + mem->slots[i].alloc_size =0 ; + } +memset (vaddr,0 , bytes); +} + +int __init swiotlb_init_with_tbl (char *tlb,unsigned long nslabs,int verbose) +{struct io_tlb_mem *mem;size_t alloc_size;
@@ -186,16 +205,8 @@ int __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)if (!mem)panic ("%s: Failed to allocate %zu bytes align=0x%lx\n" , __func__, alloc_size,PAGE_SIZE ); - mem->nslabs = nslabs; - mem->start =__pa (tlb); - mem->end = mem->start + bytes; - mem->index =0 ; -spin_lock_init (&mem->lock); -for (i =0 ; i < mem->nslabs; i++) { - mem->slots[i].list =IO_TLB_SEGSIZE -io_tlb_offset (i); - mem->slots[i].orig_addr =INVALID_PHYS_ADDR ; - mem->slots[i].alloc_size =0 ; - } + +swiotlb_init_io_tlb_mem (mem,__pa (tlb), nslabs, false); io_tlb_default_mem = mem;if (verbose)
@@ -282,8 +293,8 @@ swiotlb_late_init_with_default_size(size_t default_size)int swiotlb_late_init_with_tbl (char *tlb,unsigned long nslabs) { -unsigned long bytes = nslabs <<IO_TLB_SHIFT , i;struct io_tlb_mem *mem; +unsigned long bytes = nslabs <<IO_TLB_SHIFT ;if (swiotlb_force ==SWIOTLB_NO_FORCE )return 0 ;
@@ -297,20 +308,9 @@ swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs)if (!mem)return -ENOMEM ; - mem->nslabs = nslabs; - mem->start =virt_to_phys (tlb); - mem->end = mem->start + bytes; - mem->index =0 ; - mem->late_alloc =1 ; -spin_lock_init (&mem->lock); -for (i =0 ; i < mem->nslabs; i++) { - mem->slots[i].list =IO_TLB_SEGSIZE -io_tlb_offset (i); - mem->slots[i].orig_addr =INVALID_PHYS_ADDR ; - mem->slots[i].alloc_size =0 ; - } - +memset (mem,0 ,sizeof (*mem));set_memory_decrypted ((unsigned long )tlb, bytes >>PAGE_SHIFT ); -memset (tlb,0 , bytes); +swiotlb_init_io_tlb_mem (mem,virt_to_phys (tlb), nslabs, true); io_tlb_default_mem = mem;swiotlb_print_info ();
Signature · 1 line
2.32.0.288.g62a8d224e6-goog
PATCH v15 2/12 swiotlb: Refactor swiotlb_create_debugfs
In reply to Claire ChangSplit the debugfs creation to make the code reusable for supporting different bounce buffer pools.
--- kernel/dma/swiotlb.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
kernel/dma/swiotlb.c +14 -7
@@ -671,19 +671,26 @@ bool is_swiotlb_active(void)EXPORT_SYMBOL_GPL (is_swiotlb_active);#ifdef CONFIG_DEBUG_FS +static struct dentry *debugfs_dir; -static int __init swiotlb_create_debugfs (void ) +static void swiotlb_create_debugfs_files (struct io_tlb_mem *mem) { -struct io_tlb_mem *mem = io_tlb_default_mem; - -if (!mem) -return 0 ; - mem->debugfs =debugfs_create_dir ("swiotlb" ,NULL );debugfs_create_ulong ("io_tlb_nslabs" ,0400 , mem->debugfs, &mem->nslabs);debugfs_create_ulong ("io_tlb_used" ,0400 , mem->debugfs, &mem->used); +} + +static int __init swiotlb_create_default_debugfs (void ) +{ +struct io_tlb_mem *mem = io_tlb_default_mem; + + debugfs_dir =debugfs_create_dir ("swiotlb" ,NULL ); +if (mem) { + mem->debugfs = debugfs_dir; +swiotlb_create_debugfs_files (mem); + }return 0 ; } -late_initcall (swiotlb_create_debugfs); +late_initcall (swiotlb_create_default_debugfs);#endif
Signature · 1 line
2.32.0.288.g62a8d224e6-goog
PATCH v15 3/12 swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used
In reply to Claire ChangAlways have the pointer to the swiotlb pool used in struct device. This could help simplify the code for other pools.
--- drivers/base/core.c | 4 ++++ include/linux/device.h | 4 ++++ kernel/dma/swiotlb.c | 8 ++++---- 3 files changed, 12 insertions(+), 4 deletions(-)
drivers/base/core.c +4 -0
@@ -27,6 +27,7 @@#include <linux/netdevice.h> #include <linux/sched/signal.h> #include <linux/sched/mm.h> +#include <linux/swiotlb.h> #include <linux/sysfs.h> #include <linux/dma-map-ops.h> /* for dma_default_coherent */
@@ -2736,6 +2737,9 @@ void device_initialize(struct device *dev)defined (CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL) dev->dma_coherent = dma_default_coherent;#endif +#ifdef CONFIG_SWIOTLB + dev->dma_io_tlb_mem = io_tlb_default_mem; +#endif }EXPORT_SYMBOL_GPL (device_initialize);
include/linux/device.h +4 -0
@@ -416,6 +416,7 @@ struct dev_links_info {* @dma_pools: Dma pools (if dma'ble device). * @dma_mem: Internal for coherent mem override. * @cma_area: Contiguous memory area for dma allocations +* @dma_io_tlb_mem: Pointer to the swiotlb pool used. Not for driver use. * @archdata: For arch-specific additions. * @of_node: Associated device tree node. * @fwnode: Associated device node supplied by platform firmware.
@@ -518,6 +519,9 @@ struct device {#ifdef CONFIG_DMA_CMA struct cma *cma_area;/* contiguous memory area for dma allocations */ +#endif +#ifdef CONFIG_SWIOTLB +struct io_tlb_mem *dma_io_tlb_mem;#endif /* arch specific additions */ struct dev_archdata archdata;
kernel/dma/swiotlb.c +4 -4
@@ -340,7 +340,7 @@ void __init swiotlb_exit(void)static void swiotlb_bounce (struct device *dev,phys_addr_t tlb_addr,size_t size,enum dma_data_direction dir) { -struct io_tlb_mem *mem = io_tlb_default_mem; +struct io_tlb_mem *mem = dev->dma_io_tlb_mem;int index = (tlb_addr - mem->start) >>IO_TLB_SHIFT ;unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE -1 );phys_addr_t orig_addr = mem->slots[index].orig_addr;
@@ -431,7 +431,7 @@ static unsigned int wrap_index(struct io_tlb_mem *mem, unsigned int index)static int find_slots (struct device *dev,phys_addr_t orig_addr,size_t alloc_size) { -struct io_tlb_mem *mem = io_tlb_default_mem; +struct io_tlb_mem *mem = dev->dma_io_tlb_mem;unsigned long boundary_mask =dma_get_seg_boundary (dev);dma_addr_t tbl_dma_addr =phys_to_dma_unencrypted (dev, mem->start) & boundary_mask;
@@ -508,7 +508,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, size_t mapping_size, size_t alloc_size, enum dma_data_direction dir, unsigned long attrs) { - struct io_tlb_mem *mem = io_tlb_default_mem; + struct io_tlb_mem *mem = dev->dma_io_tlb_mem;unsigned int offset =swiotlb_align_offset (dev, orig_addr);unsigned int i;int index;
@@ -559,7 +559,7 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr, size_t mapping_size, enum dma_data_direction dir, unsigned long attrs) { - struct io_tlb_mem *mem = io_tlb_default_mem; + struct io_tlb_mem *mem = hwdev->dma_io_tlb_mem;unsigned long flags;unsigned int offset =swiotlb_align_offset (hwdev, tlb_addr);int index = (tlb_addr - offset - mem->start) >>IO_TLB_SHIFT ;
Signature · 1 line
2.32.0.288.g62a8d224e6-goog
PATCH v15 4/12 swiotlb: Update is_swiotlb_buffer to add a struct device argument
In reply to Claire ChangUpdate is_swiotlb_buffer to add a struct device argument. This will be useful later to allow for different pools.
--- drivers/iommu/dma-iommu.c | 12 ++++++------ drivers/xen/swiotlb-xen.c | 2 +- include/linux/swiotlb.h | 7 ++++--- kernel/dma/direct.c | 6 +++--- kernel/dma/direct.h | 6 +++--- 5 files changed, 17 insertions(+), 16 deletions(-)
drivers/iommu/dma-iommu.c +6 -6
@@ -507,7 +507,7 @@ static void __iommu_dma_unmap_swiotlb(struct device *dev, dma_addr_t dma_addr,__iommu_dma_unmap (dev, dma_addr, size); -if (unlikely (is_swiotlb_buffer (phys))) +if (unlikely (is_swiotlb_buffer (dev, phys)))swiotlb_tbl_unmap_single (dev, phys, size, dir, attrs); }
@@ -578,7 +578,7 @@ static dma_addr_t __iommu_dma_map_swiotlb(struct device *dev, phys_addr_t phys, } iova =__iommu_dma_map (dev, phys, aligned_size, prot, dma_mask); -if (iova ==DMA_MAPPING_ERROR &&is_swiotlb_buffer (phys)) +if (iova ==DMA_MAPPING_ERROR &&is_swiotlb_buffer (dev, phys))swiotlb_tbl_unmap_single (dev, phys, org_size, dir, attrs);return iova; }
@@ -749,7 +749,7 @@ static void iommu_dma_sync_single_for_cpu(struct device *dev,if (!dev_is_dma_coherent (dev))arch_sync_dma_for_cpu (phys, size, dir); -if (is_swiotlb_buffer (phys)) +if (is_swiotlb_buffer (dev, phys))swiotlb_sync_single_for_cpu (dev, phys, size, dir); }
@@ -762,7 +762,7 @@ static void iommu_dma_sync_single_for_device(struct device *dev,return ; phys =iommu_iova_to_phys (iommu_get_dma_domain (dev), dma_handle); -if (is_swiotlb_buffer (phys)) +if (is_swiotlb_buffer (dev, phys))swiotlb_sync_single_for_device (dev, phys, size, dir);if (!dev_is_dma_coherent (dev))
@@ -783,7 +783,7 @@ static void iommu_dma_sync_sg_for_cpu(struct device *dev,if (!dev_is_dma_coherent (dev))arch_sync_dma_for_cpu (sg_phys (sg), sg->length, dir); -if (is_swiotlb_buffer (sg_phys (sg))) +if (is_swiotlb_buffer (dev,sg_phys (sg)))swiotlb_sync_single_for_cpu (dev,sg_phys (sg), sg->length, dir); }
@@ -800,7 +800,7 @@ static void iommu_dma_sync_sg_for_device(struct device *dev,return ;for_each_sg (sgl, sg, nelems, i) { -if (is_swiotlb_buffer (sg_phys (sg))) +if (is_swiotlb_buffer (dev,sg_phys (sg)))swiotlb_sync_single_for_device (dev,sg_phys (sg), sg->length, dir);
drivers/xen/swiotlb-xen.c +1 -1
@@ -100,7 +100,7 @@ static int is_xen_swiotlb_buffer(struct device *dev, dma_addr_t dma_addr)* in our domain. Therefore _only_ check address within our domain. */ if (pfn_valid (PFN_DOWN (paddr))) -return is_swiotlb_buffer (paddr); +return is_swiotlb_buffer (dev, paddr);return 0 ; }
include/linux/swiotlb.h +4 -3
@@ -2,6 +2,7 @@#ifndef __LINUX_SWIOTLB_H#define __LINUX_SWIOTLB_H +#include <linux/device.h> #include <linux/dma-direction.h> #include <linux/init.h> #include <linux/types.h>
@@ -101,9 +102,9 @@ struct io_tlb_mem { };extern struct io_tlb_mem *io_tlb_default_mem; -static inline bool is_swiotlb_buffer (phys_addr_t paddr) +static inline bool is_swiotlb_buffer (struct device *dev,phys_addr_t paddr) { -struct io_tlb_mem *mem = io_tlb_default_mem; +struct io_tlb_mem *mem = dev->dma_io_tlb_mem;return mem && paddr >= mem->start && paddr < mem->end; }
@@ -115,7 +116,7 @@ bool is_swiotlb_active(void);void __init swiotlb_adjust_size (unsigned long size);#else #define swiotlb_force SWIOTLB_NO_FORCE -static inline bool is_swiotlb_buffer (phys_addr_t paddr) +static inline bool is_swiotlb_buffer (struct device *dev,phys_addr_t paddr) {return false; }
kernel/dma/direct.c +3 -3
@@ -343,7 +343,7 @@ void dma_direct_sync_sg_for_device(struct device *dev,for_each_sg (sgl, sg, nents, i) {phys_addr_t paddr =dma_to_phys (dev,sg_dma_address (sg)); -if (unlikely (is_swiotlb_buffer (paddr))) +if (unlikely (is_swiotlb_buffer (dev, paddr)))swiotlb_sync_single_for_device (dev, paddr, sg->length, dir);
@@ -369,7 +369,7 @@ void dma_direct_sync_sg_for_cpu(struct device *dev,if (!dev_is_dma_coherent (dev))arch_sync_dma_for_cpu (paddr, sg->length, dir); -if (unlikely (is_swiotlb_buffer (paddr))) +if (unlikely (is_swiotlb_buffer (dev, paddr)))swiotlb_sync_single_for_cpu (dev, paddr, sg->length, dir);
@@ -504,7 +504,7 @@ size_t dma_direct_max_mapping_size(struct device *dev)bool dma_direct_need_sync (struct device *dev,dma_addr_t dma_addr) {return !dev_is_dma_coherent (dev) || -is_swiotlb_buffer (dma_to_phys (dev, dma_addr)); +is_swiotlb_buffer (dev,dma_to_phys (dev, dma_addr)); }/**
kernel/dma/direct.h +3 -3
@@ -56,7 +56,7 @@ static inline void dma_direct_sync_single_for_device(struct device *dev, {phys_addr_t paddr =dma_to_phys (dev, addr); -if (unlikely (is_swiotlb_buffer (paddr))) +if (unlikely (is_swiotlb_buffer (dev, paddr)))swiotlb_sync_single_for_device (dev, paddr, size, dir);if (!dev_is_dma_coherent (dev))
@@ -73,7 +73,7 @@ static inline void dma_direct_sync_single_for_cpu(struct device *dev,arch_sync_dma_for_cpu_all (); } -if (unlikely (is_swiotlb_buffer (paddr))) +if (unlikely (is_swiotlb_buffer (dev, paddr)))swiotlb_sync_single_for_cpu (dev, paddr, size, dir);if (dir ==DMA_FROM_DEVICE )
@@ -113,7 +113,7 @@ static inline void dma_direct_unmap_page(struct device *dev, dma_addr_t addr,if (!(attrs &DMA_ATTR_SKIP_CPU_SYNC ))dma_direct_sync_single_for_cpu (dev, addr, size, dir); -if (unlikely (is_swiotlb_buffer (phys))) +if (unlikely (is_swiotlb_buffer (dev, phys))) swiotlb_tbl_unmap_single(dev, phys, size, dir, attrs); }#endif /* _KERNEL_DMA_DIRECT_H */
Signature · 6 lines
2.32.0.288.g62a8d224e6-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 5/12 swiotlb: Update is_swiotlb_active to add a struct device argument
In reply to Claire ChangUpdate is_swiotlb_active to add a struct device argument. This will be useful later to allow for different pools.
--- drivers/gpu/drm/i915/gem/i915_gem_internal.c | 2 +- drivers/gpu/drm/nouveau/nouveau_ttm.c | 2 +- drivers/pci/xen-pcifront.c | 2 +- include/linux/swiotlb.h | 4 ++-- kernel/dma/direct.c | 2 +- kernel/dma/swiotlb.c | 4 ++-- 6 files changed, 8 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/gem/i915_gem_internal.c +1 -1
@@ -42,7 +42,7 @@ static int i915_gem_object_get_pages_internal(struct drm_i915_gem_object *obj) max_order =MAX_ORDER ;#ifdef CONFIG_SWIOTLB -if (is_swiotlb_active ()) { +if (is_swiotlb_active (obj->base.dev->dev)) {unsigned int max_segment; max_segment =swiotlb_max_segment ();
drivers/gpu/drm/nouveau/nouveau_ttm.c +1 -1
@@ -321,7 +321,7 @@ nouveau_ttm_init(struct nouveau_drm *drm) }#if IS_ENABLED (CONFIG_SWIOTLB ) &&IS_ENABLED (CONFIG_X86 ) - need_swiotlb =is_swiotlb_active (); + need_swiotlb =is_swiotlb_active (dev->dev);#endif ret = ttm_bo_device_init(&drm->ttm.bdev, &nouveau_bo_driver,
drivers/pci/xen-pcifront.c +1 -1
@@ -693,7 +693,7 @@ static int pcifront_connect_and_init_dma(struct pcifront_device *pdev)spin_unlock (&pcifront_dev_lock); -if (!err && !is_swiotlb_active ()) { +if (!err && !is_swiotlb_active (&pdev->xdev->dev)) { err =pci_xen_swiotlb_init_late ();if (err)dev_err (&pdev->xdev->dev,"Could not setup SWIOTLB!\n" );
include/linux/swiotlb.h +2 -2
@@ -112,7 +112,7 @@ static inline bool is_swiotlb_buffer(struct device *dev, phys_addr_t paddr)void __init swiotlb_exit (void );unsigned int swiotlb_max_segment (void );size_t swiotlb_max_mapping_size (struct device *dev); -bool is_swiotlb_active (void ); +bool is_swiotlb_active (struct device *dev);void __init swiotlb_adjust_size (unsigned long size);#else #define swiotlb_force SWIOTLB_NO_FORCE
@@ -132,7 +132,7 @@ static inline size_t swiotlb_max_mapping_size(struct device *dev)return SIZE_MAX ; } -static inline bool is_swiotlb_active (void ) +static inline bool is_swiotlb_active (struct device *dev) {return false; }
kernel/dma/direct.c +1 -1
@@ -495,7 +495,7 @@ int dma_direct_supported(struct device *dev, u64 mask)size_t dma_direct_max_mapping_size (struct device *dev) {/* If SWIOTLB is active, use its maximum mapping size */ -if (is_swiotlb_active () && +if (is_swiotlb_active (dev) && (dma_addressing_limited (dev) || swiotlb_force ==SWIOTLB_FORCE ))return swiotlb_max_mapping_size (dev);return SIZE_MAX ;
kernel/dma/swiotlb.c +2 -2
@@ -664,9 +664,9 @@ size_t swiotlb_max_mapping_size(struct device *dev)return ((size_t )IO_TLB_SIZE ) *IO_TLB_SEGSIZE ; } -bool is_swiotlb_active (void ) +bool is_swiotlb_active (struct device *dev) { -return io_tlb_default_mem !=NULL ; +return dev->dma_io_tlb_mem !=NULL ; }EXPORT_SYMBOL_GPL (is_swiotlb_active);
Signature · 1 line
2.32.0.288.g62a8d224e6-goog
PATCH v15 6/12 swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
In reply to Claire ChangPropagate the swiotlb_force into io_tlb_default_mem->force_bounce and use it to determine whether to bounce the data or not. This will be useful later to allow for different pools.
--- drivers/xen/swiotlb-xen.c | 2 +- include/linux/swiotlb.h | 13 +++++++++++++ kernel/dma/direct.c | 2 +- kernel/dma/direct.h | 2 +- kernel/dma/swiotlb.c | 4 ++++ 5 files changed, 20 insertions(+), 3 deletions(-)
drivers/xen/swiotlb-xen.c +1 -1
@@ -369,7 +369,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,if (dma_capable (dev, dev_addr, size, true) && !range_straddles_page_boundary (phys, size) && !xen_arch_need_swiotlb (dev, phys, dev_addr) && - swiotlb_force !=SWIOTLB_FORCE ) + !is_swiotlb_force_bounce (dev)) goto done;/*
include/linux/swiotlb.h +13 -0
@@ -84,6 +84,7 @@ extern enum swiotlb_force swiotlb_force;* unmap calls. * @debugfs: The dentry to debugfs. * @late_alloc: %true if allocated using the page allocator +* @force_bounce: %true if swiotlb bouncing is forced */ struct io_tlb_mem {phys_addr_t start;
@@ -94,6 +95,7 @@ struct io_tlb_mem {spinlock_t lock;struct dentry *debugfs;bool late_alloc; +bool force_bounce;struct io_tlb_slot {phys_addr_t orig_addr;size_t alloc_size;
@@ -109,6 +111,13 @@ static inline bool is_swiotlb_buffer(struct device *dev, phys_addr_t paddr)return mem && paddr >= mem->start && paddr < mem->end; } +static inline bool is_swiotlb_force_bounce (struct device *dev) +{ +struct io_tlb_mem *mem = dev->dma_io_tlb_mem; + +return mem && mem->force_bounce; +} +void __init swiotlb_exit (void );unsigned int swiotlb_max_segment (void );size_t swiotlb_max_mapping_size (struct device *dev);
@@ -120,6 +129,10 @@ static inline bool is_swiotlb_buffer(struct device *dev, phys_addr_t paddr) {return false; } +static inline bool is_swiotlb_force_bounce (struct device *dev) +{ +return false; +}static inline void swiotlb_exit (void ) { }
kernel/dma/direct.c +1 -1
@@ -496,7 +496,7 @@ size_t dma_direct_max_mapping_size(struct device *dev) {/* If SWIOTLB is active, use its maximum mapping size */ if (is_swiotlb_active (dev) && - (dma_addressing_limited (dev) || swiotlb_force ==SWIOTLB_FORCE )) + (dma_addressing_limited (dev) ||is_swiotlb_force_bounce (dev)))return swiotlb_max_mapping_size (dev);return SIZE_MAX ; }
kernel/dma/direct.h +1 -1
@@ -87,7 +87,7 @@ static inline dma_addr_t dma_direct_map_page(struct device *dev,phys_addr_t phys =page_to_phys (page) + offset;dma_addr_t dma_addr =phys_to_dma (dev, phys); -if (unlikely (swiotlb_force ==SWIOTLB_FORCE )) +if (is_swiotlb_force_bounce (dev))return swiotlb_map (dev, phys, size, dir, attrs);if (unlikely (!dma_capable (dev, dma_addr, size, true))) {
kernel/dma/swiotlb.c +4 -0
@@ -179,6 +179,10 @@ static void swiotlb_init_io_tlb_mem(struct io_tlb_mem *mem, phys_addr_t start, mem->end = mem->start + bytes; mem->index =0 ; mem->late_alloc = late_alloc; + +if (swiotlb_force ==SWIOTLB_FORCE ) + mem->force_bounce = true; +spin_lock_init (&mem->lock);for (i =0 ; i < mem->nslabs; i++) { mem->slots[i].list =IO_TLB_SEGSIZE -io_tlb_offset (i);
Signature · 6 lines
2.32.0.288.g62a8d224e6-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 9 lines · Claire Chang
Propagate the
swiotlb_forceintoio_tlb_default_mem->force_bounceand use it to determine whether to bounce the data or not. This will be useful later to allow for different pools.Signed-off-by Claire Chang <[email protected]>Reviewed-by Christoph Hellwig <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>
This patch as commit af452ec1b1a3 ("swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing") causes my Ryzen 3 4300G system to fail to get to an X session consistently (although not every single time), presumably due to a crash in the AMDGPU driver that I see in dmesg.
I have attached logs at af452ec1b1a3 and f127c9556a8e and I am happy to provide any further information, debug, or test patches as necessary.
Cheers,
Nathan
-- Journal begins at Mon 2021-06-28 09:22:12 MST, ends at Tue 2021-06-29 18:29:54 MST. --
Jun 29 18:28:41 hp-4300G kernel: Linux version 5.12.0-rc3-00025-gaf452ec1b1a3 (nathan@archlinux-ax161) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.50.20210627) #1 SMP PREEMPT Tue Jun 29 18:25:35 MST 2021 Jun 29 18:28:41 hp-4300G kernel: Command line: initrd=\amd-ucode.img initrd=\initramfs-linux-next-llvm.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp irqpoll Jun 29 18:28:41 hp-4300G kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' Jun 29 18:28:41 hp-4300G kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' Jun 29 18:28:41 hp-4300G kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' Jun 29 18:28:41 hp-4300G kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 Jun 29 18:28:41 hp-4300G kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. Jun 29 18:28:41 hp-4300G kernel: BIOS-provided physical RAM map: Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000009c0ffff] usable Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x0000000009c10000-0x0000000009ffffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x000000000a20d000-0x000000000affffff] usable Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x000000000b020000-0x00000000b838ffff] usable Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000b8a15000-0x00000000badfefff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000badff000-0x00000000bbffffff] usable Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000bc000000-0x00000000bdffffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable Jun 29 18:28:41 hp-4300G kernel: BIOS-e820: [mem 0x000000021f380000-0x000000023fffffff] reserved Jun 29 18:28:41 hp-4300G kernel: intel_pstate: HWP disabled Jun 29 18:28:41 hp-4300G kernel: NX (Execute Disable) protection: active Jun 29 18:28:41 hp-4300G kernel: e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable Jun 29 18:28:41 hp-4300G kernel: e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable Jun 29 18:28:41 hp-4300G kernel: extended physical RAM map: Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x0000000000100000-0x0000000009c0ffff] usable Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x0000000009c10000-0x0000000009ffffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x000000000a20d000-0x000000000affffff] usable Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x000000000b020000-0x00000000b4c66017] usable Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000b4c66018-0x00000000b4c73457] usable Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000b4c73458-0x00000000b838ffff] usable Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000b8a15000-0x00000000badfefff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000badff000-0x00000000bbffffff] usable Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000bc000000-0x00000000bdffffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000bf000000-0x00000000bfffffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x0000000100000000-0x000000021f37ffff] usable Jun 29 18:28:41 hp-4300G kernel: reserve setup_data: [mem 0x000000021f380000-0x000000023fffffff] reserved Jun 29 18:28:41 hp-4300G kernel: efi: EFI v2.70 by American Megatrends Jun 29 18:28:41 hp-4300G kernel: efi: ACPI=0xb8721000 ACPI 2.0=0xb8721014 TPMFinalLog=0xb89c8000 SMBIOS=0xbac0f000 SMBIOS 3.0=0xbac0e000 MEMATTR=0xb5184018 ESRT=0xb6dde918 RNG=0xbac3e998 TPMEventLog=0xb5185018 Jun 29 18:28:41 hp-4300G kernel: efi: seeding entropy pool Jun 29 18:28:41 hp-4300G kernel: SMBIOS 3.3.0 present. Jun 29 18:28:41 hp-4300G kernel: DMI: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 Jun 29 18:28:41 hp-4300G kernel: tsc: Fast TSC calibration using PIT Jun 29 18:28:41 hp-4300G kernel: tsc: Detected 3793.033 MHz processor Jun 29 18:28:41 hp-4300G kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Jun 29 18:28:41 hp-4300G kernel: e820: remove [mem 0x000a0000-0x000fffff] usable Jun 29 18:28:41 hp-4300G kernel: last_pfn = 0x21f380 max_arch_pfn = 0x400000000 Jun 29 18:28:41 hp-4300G kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Jun 29 18:28:41 hp-4300G kernel: e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved Jun 29 18:28:41 hp-4300G kernel: last_pfn = 0xbc000 max_arch_pfn = 0x400000000 Jun 29 18:28:41 hp-4300G kernel: esrt: Reserving ESRT space from 0x00000000b6dde918 to 0x00000000b6dde950. Jun 29 18:28:41 hp-4300G kernel: e820: update [mem 0xb6dde000-0xb6ddefff] usable ==> reserved Jun 29 18:28:41 hp-4300G kernel: check: Scanning 1 areas for low memory corruption Jun 29 18:28:41 hp-4300G kernel: Using GB pages for direct mapping Jun 29 18:28:41 hp-4300G kernel: Secure boot disabled Jun 29 18:28:41 hp-4300G kernel: RAMDISK: [mem 0x7f859000-0x7fff5fff] Jun 29 18:28:41 hp-4300G kernel: ACPI: Early table checksum verification disabled Jun 29 18:28:41 hp-4300G kernel: ACPI: RSDP 0x00000000B8721014 000024 (v02 HPQOEM) Jun 29 18:28:41 hp-4300G kernel: ACPI: XSDT 0x00000000B8720728 0000EC (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) Jun 29 18:28:41 hp-4300G kernel: ACPI: FACP 0x00000000B870F000 000114 (v06 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:28:41 hp-4300G kernel: ACPI: DSDT 0x00000000B86FE000 01050C (v02 HPQOEM SLIC-CPC 01072009 INTL 20120913) Jun 29 18:28:41 hp-4300G kernel: ACPI: FACS 0x00000000B89F8000 000040 Jun 29 18:28:41 hp-4300G kernel: ACPI: MSDM 0x00000000B871F000 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI 01000013) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B871E000 000050 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:28:41 hp-4300G kernel: ACPI: IVRS 0x00000000B871D000 0000D0 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000000) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B8715000 007229 (v02 HPQOEM SLIC-CPC 00000002 MSFT 04000000) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B8711000 003BA1 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B8710000 000094 (v02 HPQOEM SLIC-CPC 01072009 AMI 01072009) Jun 29 18:28:41 hp-4300G kernel: ACPI: FIDT 0x00000000B86FD000 00009C (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:28:41 hp-4300G kernel: ACPI: MCFG 0x00000000B86FC000 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00010013) Jun 29 18:28:41 hp-4300G kernel: ACPI: HPET 0x00000000B86FB000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00000005) Jun 29 18:28:41 hp-4300G kernel: ACPI: VFCT 0x00000000B86ED000 00D484 (v01 HPQOEM SLIC-CPC 00000001 AMD 31504F47) Jun 29 18:28:41 hp-4300G kernel: ACPI: BGRT 0x00000000B86EC000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:28:41 hp-4300G kernel: ACPI: TPM2 0x00000000B86EB000 00004C (v04 HPQOEM SLIC-CPC 00000001 AMI 00000000) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B86E9000 001CE4 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000001) Jun 29 18:28:41 hp-4300G kernel: ACPI: CRAT 0x00000000B86E8000 0007E8 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) Jun 29 18:28:41 hp-4300G kernel: ACPI: CDIT 0x00000000B86E7000 000029 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B86E6000 000D37 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B86E4000 0010A5 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B86E0000 00333E (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B86DF000 0000BF (v01 HPQOEM SLIC-CPC 00001000 INTL 20120913) Jun 29 18:28:41 hp-4300G kernel: ACPI: WSMT 0x00000000B86DE000 000028 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:28:41 hp-4300G kernel: ACPI: APIC 0x00000000B86DD000 00015E (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B86DC000 000517 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:28:41 hp-4300G kernel: ACPI: SSDT 0x00000000B86DA000 0010AF (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:28:41 hp-4300G kernel: ACPI: FPDT 0x00000000B86D9000 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) Jun 29 18:28:41 hp-4300G kernel: ACPI: Local APIC address 0xfee00000 Jun 29 18:28:41 hp-4300G kernel: No NUMA configuration found Jun 29 18:28:41 hp-4300G kernel: Faking a node at [mem 0x0000000000000000-0x000000021f37ffff] Jun 29 18:28:41 hp-4300G kernel: NODE_DATA(0) allocated [mem 0x21f37c000-0x21f37ffff] Jun 29 18:28:41 hp-4300G kernel: Zone ranges: Jun 29 18:28:41 hp-4300G kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff] Jun 29 18:28:41 hp-4300G kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Jun 29 18:28:41 hp-4300G kernel: Normal [mem 0x0000000100000000-0x000000021f37ffff] Jun 29 18:28:41 hp-4300G kernel: Device empty Jun 29 18:28:41 hp-4300G kernel: Movable zone start for each node Jun 29 18:28:41 hp-4300G kernel: Early memory node ranges Jun 29 18:28:41 hp-4300G kernel: node 0: [mem 0x0000000000001000-0x000000000009ffff] Jun 29 18:28:41 hp-4300G kernel: node 0: [mem 0x0000000000100000-0x0000000009c0ffff] Jun 29 18:28:41 hp-4300G kernel: node 0: [mem 0x000000000a000000-0x000000000a1fffff] Jun 29 18:28:41 hp-4300G kernel: node 0: [mem 0x000000000a20d000-0x000000000affffff] Jun 29 18:28:41 hp-4300G kernel: node 0: [mem 0x000000000b020000-0x00000000b838ffff] Jun 29 18:28:41 hp-4300G kernel: node 0: [mem 0x00000000badff000-0x00000000bbffffff] Jun 29 18:28:41 hp-4300G kernel: node 0: [mem 0x0000000100000000-0x000000021f37ffff] Jun 29 18:28:41 hp-4300G kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff] Jun 29 18:28:41 hp-4300G kernel: On node 0 totalpages: 1934483 Jun 29 18:28:41 hp-4300G kernel: DMA zone: 64 pages used for memmap Jun 29 18:28:41 hp-4300G kernel: DMA zone: 26 pages reserved Jun 29 18:28:41 hp-4300G kernel: DMA zone: 3999 pages, LIFO batch:0 Jun 29 18:28:41 hp-4300G kernel: DMA zone: 28769 pages in unavailable ranges Jun 29 18:28:41 hp-4300G kernel: DMA32 zone: 11782 pages used for memmap Jun 29 18:28:41 hp-4300G kernel: DMA32 zone: 754036 pages, LIFO batch:63 Jun 29 18:28:41 hp-4300G kernel: DMA32 zone: 28300 pages in unavailable ranges Jun 29 18:28:41 hp-4300G kernel: Normal zone: 18382 pages used for memmap Jun 29 18:28:41 hp-4300G kernel: Normal zone: 1176448 pages, LIFO batch:63 Jun 29 18:28:41 hp-4300G kernel: Normal zone: 3200 pages in unavailable ranges Jun 29 18:28:41 hp-4300G kernel: ACPI: PM-Timer IO Port: 0x808 Jun 29 18:28:41 hp-4300G kernel: ACPI: Local APIC address 0xfee00000 Jun 29 18:28:41 hp-4300G kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Jun 29 18:28:41 hp-4300G kernel: IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 Jun 29 18:28:41 hp-4300G kernel: IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 Jun 29 18:28:41 hp-4300G kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Jun 29 18:28:41 hp-4300G kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Jun 29 18:28:41 hp-4300G kernel: ACPI: IRQ0 used by override. Jun 29 18:28:41 hp-4300G kernel: ACPI: IRQ9 used by override. Jun 29 18:28:41 hp-4300G kernel: Using ACPI (MADT) for SMP configuration information Jun 29 18:28:41 hp-4300G kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000 Jun 29 18:28:41 hp-4300G kernel: e820: update [mem 0xb5158000-0xb517ffff] usable ==> reserved Jun 29 18:28:41 hp-4300G kernel: smpboot: Allowing 32 CPUs, 24 hotplug CPUs Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x09c10000-0x09ffffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb4c66000-0xb4c66fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb4c73000-0xb4c73fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb5158000-0xb517ffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb6dde000-0xb6ddefff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb8390000-0xb86c5fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb86c6000-0xb8721fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb8722000-0xb8a14fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb8a15000-0xbadfefff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xbc000000-0xbdffffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbeffffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd6fffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff] Jun 29 18:28:41 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] Jun 29 18:28:41 hp-4300G kernel: [mem 0xc0000000-0xefffffff] available for PCI devices Jun 29 18:28:41 hp-4300G kernel: Booting paravirtualized kernel on bare hardware Jun 29 18:28:41 hp-4300G kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns Jun 29 18:28:41 hp-4300G kernel: setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1 Jun 29 18:28:41 hp-4300G kernel: percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144 Jun 29 18:28:41 hp-4300G kernel: pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152 Jun 29 18:28:41 hp-4300G kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 Jun 29 18:28:41 hp-4300G kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 Jun 29 18:28:41 hp-4300G kernel: Built 1 zonelists, mobility grouping on. Total pages: 1904229 Jun 29 18:28:41 hp-4300G kernel: Policy zone: Normal Jun 29 18:28:41 hp-4300G kernel: Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux-next-llvm.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp irqpoll Jun 29 18:28:41 hp-4300G kernel: Misrouted IRQ fixup and polling support enabled Jun 29 18:28:41 hp-4300G kernel: This may significantly impact system performance Jun 29 18:28:41 hp-4300G kernel: printk: log_buf_len individual max cpu contribution: 4096 bytes Jun 29 18:28:41 hp-4300G kernel: printk: log_buf_len total cpu_extra contributions: 126976 bytes Jun 29 18:28:41 hp-4300G kernel: printk: log_buf_len min size: 131072 bytes Jun 29 18:28:41 hp-4300G kernel: printk: log_buf_len: 262144 bytes Jun 29 18:28:41 hp-4300G kernel: printk: early log buf free: 114232(87%) Jun 29 18:28:41 hp-4300G kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: mem auto-init: stack:off, heap alloc:on, heap free:off Jun 29 18:28:41 hp-4300G kernel: Memory: 7409704K/7737932K available (14344K kernel code, 2035K rwdata, 4856K rodata, 1648K init, 4340K bss, 327968K reserved, 0K cma-reserved) Jun 29 18:28:41 hp-4300G kernel: random: get_random_u64 called from __kmem_cache_create+0x2a/0x560 with crng_init=0 Jun 29 18:28:41 hp-4300G kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 Jun 29 18:28:41 hp-4300G kernel: ftrace: allocating 41885 entries in 164 pages Jun 29 18:28:41 hp-4300G kernel: ftrace: allocated 164 pages with 3 groups Jun 29 18:28:41 hp-4300G kernel: rcu: Preemptible hierarchical RCU implementation. Jun 29 18:28:41 hp-4300G kernel: rcu: RCU dyntick-idle grace-period acceleration is enabled. Jun 29 18:28:41 hp-4300G kernel: rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32. Jun 29 18:28:41 hp-4300G kernel: rcu: RCU priority boosting: priority 1 delay 500 ms. Jun 29 18:28:41 hp-4300G kernel: Trampoline variant of Tasks RCU enabled. Jun 29 18:28:41 hp-4300G kernel: Rude variant of Tasks RCU enabled. Jun 29 18:28:41 hp-4300G kernel: Tracing variant of Tasks RCU enabled. Jun 29 18:28:41 hp-4300G kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. Jun 29 18:28:41 hp-4300G kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 Jun 29 18:28:41 hp-4300G kernel: NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16 Jun 29 18:28:41 hp-4300G kernel: Console: colour dummy device 80x25 Jun 29 18:28:41 hp-4300G kernel: printk: console [tty0] enabled Jun 29 18:28:41 hp-4300G kernel: ACPI: Core revision 20210105 Jun 29 18:28:41 hp-4300G kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns Jun 29 18:28:41 hp-4300G kernel: APIC: Switch to symmetric I/O mode setup Jun 29 18:28:41 hp-4300G kernel: Switched APIC routing to physical flat. Jun 29 18:28:41 hp-4300G kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Jun 29 18:28:41 hp-4300G kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d59455212d, max_idle_ns: 881590509164 ns Jun 29 18:28:41 hp-4300G kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 7589.15 BogoMIPS (lpj=12643443) Jun 29 18:28:41 hp-4300G kernel: pid_max: default: 32768 minimum: 301 Jun 29 18:28:41 hp-4300G kernel: LSM: Security Framework initializing Jun 29 18:28:41 hp-4300G kernel: Yama: becoming mindful. Jun 29 18:28:41 hp-4300G kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated Jun 29 18:28:41 hp-4300G kernel: LVT offset 1 assigned for vector 0xf9 Jun 29 18:28:41 hp-4300G kernel: LVT offset 2 assigned for vector 0xf4 Jun 29 18:28:41 hp-4300G kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 Jun 29 18:28:41 hp-4300G kernel: Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 Jun 29 18:28:41 hp-4300G kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Jun 29 18:28:41 hp-4300G kernel: Spectre V2 : Mitigation: Full AMD retpoline Jun 29 18:28:41 hp-4300G kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Jun 29 18:28:41 hp-4300G kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls Jun 29 18:28:41 hp-4300G kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier Jun 29 18:28:41 hp-4300G kernel: Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl Jun 29 18:28:41 hp-4300G kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp Jun 29 18:28:41 hp-4300G kernel: Freeing SMP alternatives memory: 36K Jun 29 18:28:41 hp-4300G kernel: smpboot: CPU0: AMD Ryzen 3 4300G with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1) Jun 29 18:28:41 hp-4300G kernel: Performance Events: Fam17h+ core perfctr, AMD PMU driver. Jun 29 18:28:41 hp-4300G kernel: ... version: 0 Jun 29 18:28:41 hp-4300G kernel: ... bit width: 48 Jun 29 18:28:41 hp-4300G kernel: ... generic registers: 6 Jun 29 18:28:41 hp-4300G kernel: ... value mask: 0000ffffffffffff Jun 29 18:28:41 hp-4300G kernel: ... max period: 00007fffffffffff Jun 29 18:28:41 hp-4300G kernel: ... fixed-purpose events: 0 Jun 29 18:28:41 hp-4300G kernel: ... event mask: 000000000000003f Jun 29 18:28:41 hp-4300G kernel: rcu: Hierarchical SRCU implementation. Jun 29 18:28:41 hp-4300G kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. Jun 29 18:28:41 hp-4300G kernel: smp: Bringing up secondary CPUs ... Jun 29 18:28:41 hp-4300G kernel: x86: Booting SMP configuration: Jun 29 18:28:41 hp-4300G kernel: .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 Jun 29 18:28:41 hp-4300G kernel: smp: Brought up 1 node, 8 CPUs Jun 29 18:28:41 hp-4300G kernel: smpboot: Max logical packages: 4 Jun 29 18:28:41 hp-4300G kernel: smpboot: Total of 8 processors activated (60712.21 BogoMIPS) Jun 29 18:28:41 hp-4300G kernel: devtmpfs: initialized Jun 29 18:28:41 hp-4300G kernel: x86/mm: Memory block size: 128MB Jun 29 18:28:41 hp-4300G kernel: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes) Jun 29 18:28:41 hp-4300G kernel: PM: Registering ACPI NVS region [mem 0xb8722000-0xb8a14fff] (3092480 bytes) Jun 29 18:28:41 hp-4300G kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns Jun 29 18:28:41 hp-4300G kernel: futex hash table entries: 8192 (order: 7, 524288 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: pinctrl core: initialized pinctrl subsystem Jun 29 18:28:41 hp-4300G kernel: PM: RTC time: 01:28:37, date: 2021-06-30 Jun 29 18:28:41 hp-4300G kernel: NET: Registered protocol family 16 Jun 29 18:28:41 hp-4300G kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations Jun 29 18:28:41 hp-4300G kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations Jun 29 18:28:41 hp-4300G kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations Jun 29 18:28:41 hp-4300G kernel: audit: initializing netlink subsys (disabled) Jun 29 18:28:41 hp-4300G kernel: audit: type=2000 audit(1625016517.143:1): state=initialized audit_enabled=0 res=1 Jun 29 18:28:41 hp-4300G kernel: thermal_sys: Registered thermal governor 'fair_share' Jun 29 18:28:41 hp-4300G kernel: thermal_sys: Registered thermal governor 'bang_bang' Jun 29 18:28:41 hp-4300G kernel: thermal_sys: Registered thermal governor 'step_wise' Jun 29 18:28:41 hp-4300G kernel: thermal_sys: Registered thermal governor 'user_space' Jun 29 18:28:41 hp-4300G kernel: thermal_sys: Registered thermal governor 'power_allocator' Jun 29 18:28:41 hp-4300G kernel: cpuidle: using governor ladder Jun 29 18:28:41 hp-4300G kernel: cpuidle: using governor menu Jun 29 18:28:41 hp-4300G kernel: ACPI: bus type PCI registered Jun 29 18:28:41 hp-4300G kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Jun 29 18:28:41 hp-4300G kernel: PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) Jun 29 18:28:41 hp-4300G kernel: PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 Jun 29 18:28:41 hp-4300G kernel: PCI: Using configuration type 1 for base access Jun 29 18:28:41 hp-4300G kernel: Kprobes globally optimized Jun 29 18:28:41 hp-4300G kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages Jun 29 18:28:41 hp-4300G kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages Jun 29 18:28:41 hp-4300G kernel: ACPI: Added _OSI(Module Device) Jun 29 18:28:41 hp-4300G kernel: ACPI: Added _OSI(Processor Device) Jun 29 18:28:41 hp-4300G kernel: ACPI: Added _OSI(3.0 _SCP Extensions) Jun 29 18:28:41 hp-4300G kernel: ACPI: Added _OSI(Processor Aggregator Device) Jun 29 18:28:41 hp-4300G kernel: ACPI: Added _OSI(Linux-Dell-Video) Jun 29 18:28:41 hp-4300G kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) Jun 29 18:28:41 hp-4300G kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) Jun 29 18:28:41 hp-4300G kernel: ACPI: 12 ACPI AML tables successfully acquired and loaded Jun 29 18:28:41 hp-4300G kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored Jun 29 18:28:41 hp-4300G kernel: ACPI: EC: EC started Jun 29 18:28:41 hp-4300G kernel: ACPI: EC: interrupt blocked Jun 29 18:28:41 hp-4300G kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 Jun 29 18:28:41 hp-4300G kernel: ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions Jun 29 18:28:41 hp-4300G kernel: ACPI: Interpreter enabled Jun 29 18:28:41 hp-4300G kernel: ACPI: (supports S0 S3 S4 S5) Jun 29 18:28:41 hp-4300G kernel: ACPI: Using IOAPIC for interrupt routing Jun 29 18:28:41 hp-4300G kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Jun 29 18:28:41 hp-4300G kernel: ACPI: Enabled 4 GPEs in block 00 to 1F Jun 29 18:28:41 hp-4300G kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Jun 29 18:28:41 hp-4300G kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] Jun 29 18:28:41 hp-4300G kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] Jun 29 18:28:41 hp-4300G kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] Jun 29 18:28:41 hp-4300G kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge Jun 29 18:28:41 hp-4300G kernel: PCI host bridge to bus 0000:00 Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: root bus resource [bus 00-ff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: PME# supported from D0 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.2: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.2: PME# supported from D0 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: PME# supported from D0 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.2: [1022:1635] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.2: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.2: PME# supported from D0 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.0: [1022:1448] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.1: [1022:1449] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.2: [1022:144a] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.3: [1022:144b] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.4: [1022:144c] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.5: [1022:144d] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.6: [1022:144e] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.7: [1022:144f] type 00 class 0x060000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.0: [1022:43d1] type 00 class 0x0c0330 Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit] Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.0: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601 Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref] Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.1: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.1: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: PCI bridge to [bus 01-0a] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: bridge window [io 0xd000-0xefff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:00.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:00.0: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:01.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:01.0: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:02.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:02.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:02.0: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:03.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:03.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:03.0: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:04.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:04.0: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:05.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:05.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:05.0: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: PME# supported from D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: PCI bridge to [bus 02-0a] Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: bridge window [io 0xd000-0xefff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:00.0: PCI bridge to [bus 03] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:01.0: PCI bridge to [bus 04] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:02.0: PCI bridge to [bus 05] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:03.0: PCI bridge to [bus 06] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:04.0: PCI bridge to [bus 07] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:05.0: PCI bridge to [bus 08] Jun 29 18:28:41 hp-4300G kernel: pci 0000:09:00.0: [10ec:c821] type 00 class 0x028000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:09:00.0: reg 0x10: [io 0xe000-0xe0ff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:09:00.0: reg 0x18: [mem 0xfcc00000-0xfcc0ffff 64bit] Jun 29 18:28:41 hp-4300G kernel: pci 0000:09:00.0: supports D1 D2 Jun 29 18:28:41 hp-4300G kernel: pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: PCI bridge to [bus 09] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: bridge window [io 0xe000-0xefff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0a:00.0: reg 0x10: [io 0xd000-0xd0ff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0a:00.0: reg 0x18: [mem 0xfcb04000-0xfcb04fff 64bit] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0a:00.0: reg 0x20: [mem 0xfcb00000-0xfcb03fff 64bit] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0a:00.0: supports D1 D2 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: PCI bridge to [bus 0a] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0b:00.0: [1c5c:1339] type 00 class 0x010802 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0b:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0b:00.0: supports D1 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0b:00.0: PME# supported from D0 D1 D3hot Jun 29 18:28:41 hp-4300G kernel: pci 0000:0b:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:02.2 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.2: PCI bridge to [bus 0b] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: [1002:1636] type 00 class 0x030000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: reg 0x20: [io 0xf000-0xf0ff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: reg 0x24: [mem 0xfca00000-0xfca7ffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: BAR 0: assigned to efifb Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: PME# supported from D1 D2 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.1: [1002:1637] type 00 class 0x040300 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.1: reg 0x10: [mem 0xfca88000-0xfca8bfff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.1: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.1: PME# supported from D1 D2 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.2: [1022:15df] type 00 class 0x108000 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.2: reg 0x18: [mem 0xfc900000-0xfc9fffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.2: reg 0x24: [mem 0xfca8c000-0xfca8dfff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.2: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.3: [1022:1639] type 00 class 0x0c0330 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.3: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.4: [1022:1639] type 00 class 0x0c0330 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.4: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.4: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.6: [1022:15e3] type 00 class 0x040300 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.6: reg 0x10: [mem 0xfca80000-0xfca87fff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.6: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.6: PME# supported from D0 D3hot D3cold Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: PCI bridge to [bus 0c] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: bridge window [io 0xf000-0xffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0d:00.0: reg 0x24: [mem 0xfce01000-0xfce017ff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0d:00.0: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:0d:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) Jun 29 18:28:41 hp-4300G kernel: pci 0000:0d:00.1: [1022:7901] type 00 class 0x010601 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0d:00.1: reg 0x24: [mem 0xfce00000-0xfce007ff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0d:00.1: enabling Extended Tags Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.2: PCI bridge to [bus 0d] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] Jun 29 18:28:41 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:28:41 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:28:41 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:28:41 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:28:41 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:28:41 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:28:41 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:28:41 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:28:41 hp-4300G kernel: ACPI: EC: interrupt unblocked Jun 29 18:28:41 hp-4300G kernel: ACPI: EC: event unblocked Jun 29 18:28:41 hp-4300G kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 Jun 29 18:28:41 hp-4300G kernel: ACPI: EC: GPE=0x3 Jun 29 18:28:41 hp-4300G kernel: ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete Jun 29 18:28:41 hp-4300G kernel: ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events Jun 29 18:28:41 hp-4300G kernel: iommu: Default domain type: Translated Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: vgaarb: bridge control possible Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: vgaarb: setting as boot device Jun 29 18:28:41 hp-4300G kernel: vgaarb: loaded Jun 29 18:28:41 hp-4300G kernel: SCSI subsystem initialized Jun 29 18:28:41 hp-4300G kernel: libata version 3.00 loaded. Jun 29 18:28:41 hp-4300G kernel: ACPI: bus type USB registered Jun 29 18:28:41 hp-4300G kernel: usbcore: registered new interface driver usbfs Jun 29 18:28:41 hp-4300G kernel: usbcore: registered new interface driver hub Jun 29 18:28:41 hp-4300G kernel: usbcore: registered new device driver usb Jun 29 18:28:41 hp-4300G kernel: pps_core: LinuxPPS API ver. 1 registered Jun 29 18:28:41 hp-4300G kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> Jun 29 18:28:41 hp-4300G kernel: PTP clock support registered Jun 29 18:28:41 hp-4300G kernel: EDAC MC: Ver: 3.0.0 Jun 29 18:28:41 hp-4300G kernel: Registered efivars operations Jun 29 18:28:41 hp-4300G kernel: NetLabel: Initializing Jun 29 18:28:41 hp-4300G kernel: NetLabel: domain hash size = 128 Jun 29 18:28:41 hp-4300G kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 29 18:28:41 hp-4300G kernel: NetLabel: unlabeled traffic allowed by default Jun 29 18:28:41 hp-4300G kernel: PCI: Using ACPI for IRQ routing Jun 29 18:28:41 hp-4300G kernel: PCI: pci_cache_line_size set to 64 bytes Jun 29 18:28:41 hp-4300G kernel: e820: reserve RAM buffer [mem 0x09c10000-0x0bffffff] Jun 29 18:28:41 hp-4300G kernel: e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] Jun 29 18:28:41 hp-4300G kernel: e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] Jun 29 18:28:41 hp-4300G kernel: e820: reserve RAM buffer [mem 0xb4c66018-0xb7ffffff] Jun 29 18:28:41 hp-4300G kernel: e820: reserve RAM buffer [mem 0xb5158000-0xb7ffffff] Jun 29 18:28:41 hp-4300G kernel: e820: reserve RAM buffer [mem 0xb6dde000-0xb7ffffff] Jun 29 18:28:41 hp-4300G kernel: e820: reserve RAM buffer [mem 0xb8390000-0xbbffffff] Jun 29 18:28:41 hp-4300G kernel: e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff] Jun 29 18:28:41 hp-4300G kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jun 29 18:28:41 hp-4300G kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter Jun 29 18:28:41 hp-4300G kernel: clocksource: Switched to clocksource tsc-early Jun 29 18:28:41 hp-4300G kernel: VFS: Disk quotas dquot_6.6.0 Jun 29 18:28:41 hp-4300G kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Jun 29 18:28:41 hp-4300G kernel: pnp: PnP ACPI init Jun 29 18:28:41 hp-4300G kernel: system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) Jun 29 18:28:41 hp-4300G kernel: system 00:01: [mem 0x220000000-0x23fffffff window] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) Jun 29 18:28:41 hp-4300G kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a00-0x0a0f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a10-0x0a1f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a20-0x0a2f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a30-0x0a3f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a40-0x0a4f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a50-0x0a5f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a60-0x0a6f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a70-0x0a7f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a80-0x0a8f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0a90-0x0b8e] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0aa0-0x0aaf] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0ab0-0x0abf] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0ac0-0x0acf] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: [io 0x0ad0-0x0adf] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x04d0-0x04d1] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x040b] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x04d6] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0c00-0x0c01] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0c14] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0c50-0x0c51] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0c52] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0c6c] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0c6f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0cd0-0x0cd1] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0cd2-0x0cd3] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0cd4-0x0cd5] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0cd6-0x0cd7] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0cd8-0x0cdf] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0800-0x089f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0b00-0x0b0f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0b20-0x0b3f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0900-0x090f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [io 0x0910-0x091f] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: [mem 0xff000000-0xffffffff] has been reserved Jun 29 18:28:41 hp-4300G kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) Jun 29 18:28:41 hp-4300G kernel: pnp: PnP ACPI: found 5 devices Jun 29 18:28:41 hp-4300G kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns Jun 29 18:28:41 hp-4300G kernel: NET: Registered protocol family 2 Jun 29 18:28:41 hp-4300G kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: TCP: Hash tables configured (established 65536 bind 65536) Jun 29 18:28:41 hp-4300G kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) Jun 29 18:28:41 hp-4300G kernel: NET: Registered protocol family 1 Jun 29 18:28:41 hp-4300G kernel: NET: Registered protocol family 44 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:00.0: PCI bridge to [bus 03] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:01.0: PCI bridge to [bus 04] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:02.0: PCI bridge to [bus 05] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:03.0: PCI bridge to [bus 06] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:04.0: PCI bridge to [bus 07] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:05.0: PCI bridge to [bus 08] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: PCI bridge to [bus 09] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: bridge window [io 0xe000-0xefff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: PCI bridge to [bus 0a] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: PCI bridge to [bus 02-0a] Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: bridge window [io 0xd000-0xefff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: PCI bridge to [bus 01-0a] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: bridge window [io 0xd000-0xefff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.2: PCI bridge to [bus 0b] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: PCI bridge to [bus 0c] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: bridge window [io 0xf000-0xffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.2: PCI bridge to [bus 0d] Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xefff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:01: resource 1 [mem 0xfcb00000-0xfcdfffff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:02: resource 0 [io 0xd000-0xefff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfccfffff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:09: resource 0 [io 0xe000-0xefff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:09: resource 1 [mem 0xfcc00000-0xfccfffff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:0a: resource 1 [mem 0xfcb00000-0xfcbfffff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:0b: resource 1 [mem 0xfcf00000-0xfcffffff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:0c: resource 0 [io 0xf000-0xffff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:0c: resource 1 [mem 0xfc700000-0xfcafffff] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] Jun 29 18:28:41 hp-4300G kernel: pci_bus 0000:0d: resource 1 [mem 0xfce00000-0xfcefffff] Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.1: D0 power state depends on 0000:0c:00.0 Jun 29 18:28:41 hp-4300G kernel: PCI: CLS 64 bytes, default 64 Jun 29 18:28:41 hp-4300G kernel: Trying to unpack rootfs image as initramfs... Jun 29 18:28:41 hp-4300G kernel: Freeing initrd memory: 7796K Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter. Jun 29 18:28:41 hp-4300G kernel: fbcon: Taking over console Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:00.2: can't derive routing for PCI INT A Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:00.2: PCI INT A: not connected Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:01.0: Adding to iommu group 0 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.0: Adding to iommu group 1 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.1: Adding to iommu group 2 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:02.2: Adding to iommu group 3 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.0: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.1: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:08.2: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:14.0: Adding to iommu group 5 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:14.3: Adding to iommu group 5 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.0: Adding to iommu group 6 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.1: Adding to iommu group 6 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.2: Adding to iommu group 6 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.3: Adding to iommu group 6 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.4: Adding to iommu group 6 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.5: Adding to iommu group 6 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.6: Adding to iommu group 6 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:18.7: Adding to iommu group 6 Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.1: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:01:00.2: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:00.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:01.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:02.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:03.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:04.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:05.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:06.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:02:07.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:09:00.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0a:00.0: Adding to iommu group 7 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0b:00.0: Adding to iommu group 8 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.0: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.1: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.2: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.3: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.4: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0c:00.6: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0d:00.0: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:0d:00.1: Adding to iommu group 4 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 Jun 29 18:28:41 hp-4300G kernel: pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade): Jun 29 18:28:41 hp-4300G kernel: PPR X2APIC NX GT IA GA PC GA_vAPIC Jun 29 18:28:41 hp-4300G kernel: AMD-Vi: Interrupt remapping enabled Jun 29 18:28:41 hp-4300G kernel: AMD-Vi: Virtual APIC enabled Jun 29 18:28:41 hp-4300G kernel: AMD-Vi: X2APIC enabled Jun 29 18:28:41 hp-4300G kernel: AMD-Vi: Lazy IO/TLB flushing enabled Jun 29 18:28:41 hp-4300G kernel: amd_uncore: 4 amd_df counters detected Jun 29 18:28:41 hp-4300G kernel: amd_uncore: 6 amd_l3 counters detected Jun 29 18:28:41 hp-4300G kernel: LVT offset 0 assigned for vector 0x400 Jun 29 18:28:41 hp-4300G kernel: perf: AMD IBS detected (0x000003ff) Jun 29 18:28:41 hp-4300G kernel: check: Scanning for low memory corruption every 60 seconds Jun 29 18:28:41 hp-4300G kernel: Initialise system trusted keyrings Jun 29 18:28:41 hp-4300G kernel: Key type blacklist registered Jun 29 18:28:41 hp-4300G kernel: workingset: timestamp_bits=41 max_order=21 bucket_order=0 Jun 29 18:28:41 hp-4300G kernel: zbud: loaded Jun 29 18:28:41 hp-4300G kernel: Key type asymmetric registered Jun 29 18:28:41 hp-4300G kernel: Asymmetric key parser 'x509' registered Jun 29 18:28:41 hp-4300G kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) Jun 29 18:28:41 hp-4300G kernel: io scheduler mq-deadline registered Jun 29 18:28:41 hp-4300G kernel: io scheduler kyber registered Jun 29 18:28:41 hp-4300G kernel: io scheduler bfq registered Jun 29 18:28:41 hp-4300G kernel: pcieport 0000:00:02.1: PME: Signaling with IRQ 26 Jun 29 18:28:41 hp-4300G kernel: pcieport 0000:00:02.2: PME: Signaling with IRQ 27 Jun 29 18:28:41 hp-4300G kernel: pcieport 0000:00:08.1: PME: Signaling with IRQ 28 Jun 29 18:28:41 hp-4300G kernel: pcieport 0000:00:08.2: PME: Signaling with IRQ 29 Jun 29 18:28:41 hp-4300G kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Jun 29 18:28:41 hp-4300G kernel: efifb: probing for efifb Jun 29 18:28:41 hp-4300G kernel: efifb: framebuffer at 0xd0000000, using 3072k, total 3072k Jun 29 18:28:41 hp-4300G kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1 Jun 29 18:28:41 hp-4300G kernel: efifb: scrolling: redraw Jun 29 18:28:41 hp-4300G kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Jun 29 18:28:41 hp-4300G kernel: Console: switching to colour frame buffer device 128x48 Jun 29 18:28:41 hp-4300G kernel: fb0: EFI VGA frame buffer device Jun 29 18:28:41 hp-4300G kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 Jun 29 18:28:41 hp-4300G kernel: ACPI: button: Power Button [PWRB] Jun 29 18:28:41 hp-4300G kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 Jun 29 18:28:41 hp-4300G kernel: ACPI: button: Power Button [PWRF] Jun 29 18:28:41 hp-4300G kernel: Monitor-Mwait will be used to enter C-1 state Jun 29 18:28:41 hp-4300G kernel: ACPI: \_PR_.C000: Found 3 idle states Jun 29 18:28:41 hp-4300G kernel: ACPI: \_PR_.C002: Found 3 idle states Jun 29 18:28:41 hp-4300G kernel: ACPI: \_PR_.C004: Found 3 idle states Jun 29 18:28:41 hp-4300G kernel: ACPI: \_PR_.C006: Found 3 idle states Jun 29 18:28:41 hp-4300G kernel: ACPI: \_PR_.C001: Found 3 idle states Jun 29 18:28:41 hp-4300G kernel: ACPI: \_PR_.C003: Found 3 idle states Jun 29 18:28:41 hp-4300G kernel: ACPI: \_PR_.C005: Found 3 idle states Jun 29 18:28:41 hp-4300G kernel: ACPI: \_PR_.C007: Found 3 idle states Jun 29 18:28:41 hp-4300G kernel: thermal LNXTHERM:00: registered as thermal_zone0 Jun 29 18:28:41 hp-4300G kernel: ACPI: thermal: Thermal Zone [HPTZ] (30 C) Jun 29 18:28:41 hp-4300G kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Jun 29 18:28:41 hp-4300G kernel: Non-volatile memory driver v1.3 Jun 29 18:28:41 hp-4300G kernel: AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]> Jun 29 18:28:41 hp-4300G kernel: nvme nvme0: pci function 0000:0b:00.0 Jun 29 18:28:41 hp-4300G kernel: ahci 0000:01:00.1: version 3.0 Jun 29 18:28:41 hp-4300G kernel: ahci 0000:01:00.1: enabling device (0100 -> 0102) Jun 29 18:28:41 hp-4300G kernel: ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled Jun 29 18:28:41 hp-4300G kernel: ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode Jun 29 18:28:41 hp-4300G kernel: ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst Jun 29 18:28:41 hp-4300G kernel: scsi host0: ahci Jun 29 18:28:41 hp-4300G kernel: scsi host1: ahci Jun 29 18:28:41 hp-4300G kernel: scsi host2: ahci Jun 29 18:28:41 hp-4300G kernel: scsi host3: ahci Jun 29 18:28:41 hp-4300G kernel: scsi host4: ahci Jun 29 18:28:41 hp-4300G kernel: scsi host5: ahci Jun 29 18:28:41 hp-4300G kernel: scsi host6: ahci Jun 29 18:28:41 hp-4300G kernel: scsi host7: ahci Jun 29 18:28:41 hp-4300G kernel: ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 44 Jun 29 18:28:41 hp-4300G kernel: ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 44 Jun 29 18:28:41 hp-4300G kernel: ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 44 Jun 29 18:28:41 hp-4300G kernel: ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 44 Jun 29 18:28:41 hp-4300G kernel: ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 44 Jun 29 18:28:41 hp-4300G kernel: ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 44 Jun 29 18:28:41 hp-4300G kernel: ata7: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80400 irq 44 Jun 29 18:28:41 hp-4300G kernel: ata8: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80480 irq 44 Jun 29 18:28:41 hp-4300G kernel: ahci 0000:0d:00.0: enabling device (0100 -> 0102) Jun 29 18:28:41 hp-4300G kernel: ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 29 18:28:41 hp-4300G kernel: ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part Jun 29 18:28:41 hp-4300G kernel: scsi host8: ahci Jun 29 18:28:41 hp-4300G kernel: ata9: SATA max UDMA/133 abar m2048@0xfce01000 port 0xfce01100 irq 46 Jun 29 18:28:41 hp-4300G kernel: ahci 0000:0d:00.1: enabling device (0100 -> 0102) Jun 29 18:28:41 hp-4300G kernel: ahci 0000:0d:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 29 18:28:41 hp-4300G kernel: ahci 0000:0d:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part Jun 29 18:28:41 hp-4300G kernel: scsi host9: ahci Jun 29 18:28:41 hp-4300G kernel: ata10: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 48 Jun 29 18:28:41 hp-4300G kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jun 29 18:28:41 hp-4300G kernel: ehci-pci: EHCI PCI platform driver Jun 29 18:28:41 hp-4300G kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Jun 29 18:28:41 hp-4300G kernel: ohci-pci: OHCI PCI platform driver Jun 29 18:28:41 hp-4300G kernel: uhci_hcd: USB Universal Host Controller Interface driver Jun 29 18:28:41 hp-4300G kernel: usbcore: registered new interface driver usbserial_generic Jun 29 18:28:41 hp-4300G kernel: usbserial: USB Serial support registered for generic Jun 29 18:28:41 hp-4300G kernel: rtc_cmos 00:02: RTC can wake from S4 Jun 29 18:28:41 hp-4300G kernel: rtc_cmos 00:02: registered as rtc0 Jun 29 18:28:41 hp-4300G kernel: rtc_cmos 00:02: setting system clock to 2021-06-30T01:28:38 UTC (1625016518) Jun 29 18:28:41 hp-4300G kernel: rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Jun 29 18:28:41 hp-4300G kernel: ledtrig-cpu: registered to indicate activity on CPUs Jun 29 18:28:41 hp-4300G kernel: hid: raw HID events driver (C) Jiri Kosina Jun 29 18:28:41 hp-4300G kernel: drop_monitor: Initializing network drop monitor service Jun 29 18:28:41 hp-4300G kernel: Initializing XFRM netlink socket Jun 29 18:28:41 hp-4300G kernel: NET: Registered protocol family 10 Jun 29 18:28:41 hp-4300G kernel: nvme nvme0: missing or invalid SUBNQN field. Jun 29 18:28:41 hp-4300G kernel: Segment Routing with IPv6 Jun 29 18:28:41 hp-4300G kernel: RPL Segment Routing with IPv6 Jun 29 18:28:41 hp-4300G kernel: NET: Registered protocol family 17 Jun 29 18:28:41 hp-4300G kernel: microcode: CPU0: patch_level=0x08600106 Jun 29 18:28:41 hp-4300G kernel: microcode: CPU1: patch_level=0x08600106 Jun 29 18:28:41 hp-4300G kernel: microcode: CPU2: patch_level=0x08600106 Jun 29 18:28:41 hp-4300G kernel: microcode: CPU3: patch_level=0x08600106 Jun 29 18:28:41 hp-4300G kernel: microcode: CPU4: patch_level=0x08600106 Jun 29 18:28:41 hp-4300G kernel: microcode: CPU5: patch_level=0x08600106 Jun 29 18:28:41 hp-4300G kernel: microcode: CPU6: patch_level=0x08600106 Jun 29 18:28:41 hp-4300G kernel: microcode: CPU7: patch_level=0x08600106 Jun 29 18:28:41 hp-4300G kernel: microcode: Microcode Update Driver: v2.2. Jun 29 18:28:41 hp-4300G kernel: resctrl: L3 allocation detected Jun 29 18:28:41 hp-4300G kernel: resctrl: L3DATA allocation detected Jun 29 18:28:41 hp-4300G kernel: resctrl: L3CODE allocation detected Jun 29 18:28:41 hp-4300G kernel: resctrl: MB allocation detected Jun 29 18:28:41 hp-4300G kernel: resctrl: L3 monitoring detected Jun 29 18:28:41 hp-4300G kernel: IPI shorthand broadcast: enabled Jun 29 18:28:41 hp-4300G kernel: sched_clock: Marking stable (480878644, 416905)->(484173894, -2878345) Jun 29 18:28:41 hp-4300G kernel: registered taskstats version 1 Jun 29 18:28:41 hp-4300G kernel: Loading compiled-in X.509 certificates Jun 29 18:28:41 hp-4300G kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 344a5c3e232222f5edf962ab341f037cc1f1c148' Jun 29 18:28:41 hp-4300G kernel: nvme nvme0: 16/0/0 default/read/poll queues Jun 29 18:28:41 hp-4300G kernel: zswap: loaded using pool lz4/z3fold Jun 29 18:28:41 hp-4300G kernel: Key type ._fscrypt registered Jun 29 18:28:41 hp-4300G kernel: Key type .fscrypt registered Jun 29 18:28:41 hp-4300G kernel: Key type fscrypt-provisioning registered Jun 29 18:28:41 hp-4300G kernel: PM: Magic number: 9:284:459 Jun 29 18:28:41 hp-4300G kernel: RAS: Correctable Errors collector initialized. Jun 29 18:28:41 hp-4300G kernel: nvme0n1: p1 p2 Jun 29 18:28:41 hp-4300G kernel: ata1: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: ata9: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: ata10: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: ata2: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: ata3: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: tsc: Refined TSC clocksource calibration: 3819.679 MHz Jun 29 18:28:41 hp-4300G kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6e1dec388f1, max_idle_ns: 881590444886 ns Jun 29 18:28:41 hp-4300G kernel: clocksource: Switched to clocksource tsc Jun 29 18:28:41 hp-4300G kernel: ata4: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: ata5: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: ata6: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: ata7: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: ata8: SATA link down (SStatus 0 SControl 300) Jun 29 18:28:41 hp-4300G kernel: Freeing unused decrypted memory: 2036K Jun 29 18:28:41 hp-4300G kernel: Freeing unused kernel image (initmem) memory: 1648K Jun 29 18:28:41 hp-4300G kernel: Write protecting the kernel read-only data: 22528k Jun 29 18:28:41 hp-4300G kernel: Freeing unused kernel image (text/rodata gap) memory: 2036K Jun 29 18:28:41 hp-4300G kernel: Freeing unused kernel image (rodata/data gap) memory: 1288K Jun 29 18:28:41 hp-4300G kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found. Jun 29 18:28:41 hp-4300G kernel: rodata_test: all tests were successful Jun 29 18:28:41 hp-4300G kernel: Run /init as init process Jun 29 18:28:41 hp-4300G kernel: with arguments: Jun 29 18:28:41 hp-4300G kernel: /init Jun 29 18:28:41 hp-4300G kernel: with environment: Jun 29 18:28:41 hp-4300G kernel: HOME=/ Jun 29 18:28:41 hp-4300G kernel: TERM=linux Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 Jun 29 18:28:41 hp-4300G kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 Jun 29 18:28:41 hp-4300G kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:28:41 hp-4300G kernel: usb usb1: Product: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: usb usb1: Manufacturer: Linux 5.12.0-rc3-00025-gaf452ec1b1a3 xhci-hcd Jun 29 18:28:41 hp-4300G kernel: usb usb1: SerialNumber: 0000:01:00.0 Jun 29 18:28:41 hp-4300G kernel: hub 1-0:1.0: USB hub found Jun 29 18:28:41 hp-4300G kernel: hub 1-0:1.0: 14 ports detected Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed Jun 29 18:28:41 hp-4300G kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 18:28:41 hp-4300G kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 Jun 29 18:28:41 hp-4300G kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:28:41 hp-4300G kernel: usb usb2: Product: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: usb usb2: Manufacturer: Linux 5.12.0-rc3-00025-gaf452ec1b1a3 xhci-hcd Jun 29 18:28:41 hp-4300G kernel: usb usb2: SerialNumber: 0000:01:00.0 Jun 29 18:28:41 hp-4300G kernel: hub 2-0:1.0: USB hub found Jun 29 18:28:41 hp-4300G kernel: hub 2-0:1.0: 8 ports detected Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.3: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 Jun 29 18:28:41 hp-4300G kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 Jun 29 18:28:41 hp-4300G kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:28:41 hp-4300G kernel: usb usb3: Product: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: usb usb3: Manufacturer: Linux 5.12.0-rc3-00025-gaf452ec1b1a3 xhci-hcd Jun 29 18:28:41 hp-4300G kernel: usb usb3: SerialNumber: 0000:0c:00.3 Jun 29 18:28:41 hp-4300G kernel: hub 3-0:1.0: USB hub found Jun 29 18:28:41 hp-4300G kernel: hub 3-0:1.0: 4 ports detected Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.3: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed Jun 29 18:28:41 hp-4300G kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 18:28:41 hp-4300G kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 Jun 29 18:28:41 hp-4300G kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:28:41 hp-4300G kernel: usb usb4: Product: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: usb usb4: Manufacturer: Linux 5.12.0-rc3-00025-gaf452ec1b1a3 xhci-hcd Jun 29 18:28:41 hp-4300G kernel: usb usb4: SerialNumber: 0000:0c:00.3 Jun 29 18:28:41 hp-4300G kernel: hub 4-0:1.0: USB hub found Jun 29 18:28:41 hp-4300G kernel: hub 4-0:1.0: 2 ports detected Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.4: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 5 Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 Jun 29 18:28:41 hp-4300G kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 Jun 29 18:28:41 hp-4300G kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:28:41 hp-4300G kernel: usb usb5: Product: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: usb usb5: Manufacturer: Linux 5.12.0-rc3-00025-gaf452ec1b1a3 xhci-hcd Jun 29 18:28:41 hp-4300G kernel: usb usb5: SerialNumber: 0000:0c:00.4 Jun 29 18:28:41 hp-4300G kernel: hub 5-0:1.0: USB hub found Jun 29 18:28:41 hp-4300G kernel: hub 5-0:1.0: 4 ports detected Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.4: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 6 Jun 29 18:28:41 hp-4300G kernel: xhci_hcd 0000:0c:00.4: Host supports USB 3.1 Enhanced SuperSpeed Jun 29 18:28:41 hp-4300G kernel: usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 18:28:41 hp-4300G kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 Jun 29 18:28:41 hp-4300G kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:28:41 hp-4300G kernel: usb usb6: Product: xHCI Host Controller Jun 29 18:28:41 hp-4300G kernel: usb usb6: Manufacturer: Linux 5.12.0-rc3-00025-gaf452ec1b1a3 xhci-hcd Jun 29 18:28:41 hp-4300G kernel: usb usb6: SerialNumber: 0000:0c:00.4 Jun 29 18:28:41 hp-4300G kernel: hub 6-0:1.0: USB hub found Jun 29 18:28:41 hp-4300G kernel: hub 6-0:1.0: 2 ports detected Jun 29 18:28:41 hp-4300G kernel: SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled Jun 29 18:28:41 hp-4300G kernel: XFS (nvme0n1p2): Mounting V5 Filesystem Jun 29 18:28:41 hp-4300G kernel: XFS (nvme0n1p2): Ending clean mount Jun 29 18:28:41 hp-4300G kernel: xfs filesystem being mounted at /new_root supports timestamps until 2038 (0x7fffffff) Jun 29 18:28:41 hp-4300G kernel: random: fast init done Jun 29 18:28:41 hp-4300G kernel: random: crng init done Jun 29 18:28:41 hp-4300G systemd[1]: Successfully credited entropy passed from boot loader. Jun 29 18:28:41 hp-4300G systemd[1]: systemd 248.3-2-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) Jun 29 18:28:41 hp-4300G systemd[1]: Detected architecture x86-64. Jun 29 18:28:41 hp-4300G systemd[1]: Hostname set to <hp-4300G>. Jun 29 18:28:41 hp-4300G systemd-fstab-generator[247]: Mount point is not a valid path, ignoring. Jun 29 18:28:41 hp-4300G systemd-fstab-generator[247]: Mount point is not a valid path, ignoring. Jun 29 18:28:41 hp-4300G systemd[1]: Queued start job for default target Graphical Interface. Jun 29 18:28:41 hp-4300G systemd[1]: Created slice system-getty.slice. Jun 29 18:28:41 hp-4300G systemd[1]: Created slice system-modprobe.slice. Jun 29 18:28:41 hp-4300G systemd[1]: Created slice User and Session Slice. Jun 29 18:28:41 hp-4300G systemd[1]: Started Dispatch Password Requests to Console Directory Watch. Jun 29 18:28:41 hp-4300G systemd[1]: Started Forward Password Requests to Wall Directory Watch. Jun 29 18:28:41 hp-4300G systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. Jun 29 18:28:41 hp-4300G systemd[1]: Reached target Local Encrypted Volumes. Jun 29 18:28:41 hp-4300G systemd[1]: Reached target Login Prompts. Jun 29 18:28:41 hp-4300G systemd[1]: Reached target Paths. Jun 29 18:28:41 hp-4300G systemd[1]: Reached target Remote File Systems. Jun 29 18:28:41 hp-4300G systemd[1]: Reached target Slices. Jun 29 18:28:41 hp-4300G systemd[1]: Reached target Swap. Jun 29 18:28:41 hp-4300G systemd[1]: Reached target Local Verity Integrity Protected Volumes. Jun 29 18:28:41 hp-4300G systemd[1]: Listening on Device-mapper event daemon FIFOs. Jun 29 18:28:41 hp-4300G systemd[1]: Listening on Process Core Dump Socket. Jun 29 18:28:41 hp-4300G systemd[1]: Listening on Journal Audit Socket. Jun 29 18:28:41 hp-4300G systemd[1]: Listening on Journal Socket (/dev/log). Jun 29 18:28:41 hp-4300G systemd[1]: Listening on Journal Socket. Jun 29 18:28:41 hp-4300G systemd[1]: Listening on Network Service Netlink Socket. Jun 29 18:28:41 hp-4300G systemd[1]: Listening on udev Control Socket. Jun 29 18:28:41 hp-4300G systemd[1]: Listening on udev Kernel Socket. Jun 29 18:28:41 hp-4300G systemd[1]: Mounting Huge Pages File System... Jun 29 18:28:41 hp-4300G systemd[1]: Mounting POSIX Message Queue File System... Jun 29 18:28:41 hp-4300G systemd[1]: Mounting Kernel Debug File System... Jun 29 18:28:41 hp-4300G systemd[1]: Mounting Kernel Trace File System... Jun 29 18:28:41 hp-4300G systemd[1]: Starting Create list of static device nodes for the current kernel... Jun 29 18:28:41 hp-4300G systemd[1]: Starting Load Kernel Module configfs... Jun 29 18:28:41 hp-4300G systemd[1]: Starting Load Kernel Module drm... Jun 29 18:28:41 hp-4300G systemd[1]: Starting Load Kernel Module fuse... Jun 29 18:28:41 hp-4300G systemd[1]: Starting Set Up Additional Binary Formats... Jun 29 18:28:41 hp-4300G systemd[1]: Condition check resulted in File System Check on Root Device being skipped. Jun 29 18:28:41 hp-4300G kernel: Linux agpgart interface v0.103 Jun 29 18:28:41 hp-4300G systemd[1]: Starting Journal Service... Jun 29 18:28:41 hp-4300G systemd[1]: Starting Load Kernel Modules... Jun 29 18:28:41 hp-4300G systemd[1]: Starting Remount Root and Kernel File Systems... Jun 29 18:28:41 hp-4300G systemd[1]: Condition check resulted in Repartition Root Disk being skipped. Jun 29 18:28:41 hp-4300G kernel: fuse: init (API version 7.33) Jun 29 18:28:41 hp-4300G systemd[1]: Starting Coldplug All udev Devices... Jun 29 18:28:41 hp-4300G systemd[1]: Mounted Huge Pages File System. Jun 29 18:28:41 hp-4300G systemd[1]: Mounted POSIX Message Queue File System. Jun 29 18:28:41 hp-4300G systemd[1]: Mounted Kernel Debug File System. Jun 29 18:28:41 hp-4300G kernel: Asymmetric key parser 'pkcs8' registered Jun 29 18:28:41 hp-4300G kernel: XFS: attr2 mount option is deprecated. Jun 29 18:28:41 hp-4300G systemd[1]: Mounted Kernel Trace File System. Jun 29 18:28:41 hp-4300G systemd[1]: Finished Create list of static device nodes for the current kernel. Jun 29 18:28:41 hp-4300G kernel: xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) Jun 29 18:28:41 hp-4300G kernel: audit: type=1130 audit(1625016521.439:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:41 hp-4300G systemd[1]: [email protected]: Deactivated successfully. Jun 29 18:28:41 hp-4300G systemd[1]: Finished Load Kernel Module configfs. Jun 29 18:28:41 hp-4300G kernel: audit: type=1130 audit(1625016521.439:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:41 hp-4300G kernel: audit: type=1131 audit(1625016521.439:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:41 hp-4300G systemd[1]: [email protected]: Deactivated successfully. Jun 29 18:28:41 hp-4300G systemd[1]: Finished Load Kernel Module fuse. Jun 29 18:28:41 hp-4300G kernel: audit: type=1130 audit(1625016521.443:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:41 hp-4300G kernel: audit: type=1131 audit(1625016521.443:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:41 hp-4300G systemd[1]: Finished Load Kernel Modules. Jun 29 18:28:41 hp-4300G kernel: audit: type=1130 audit(1625016521.443:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:41 hp-4300G systemd[1]: Finished Remount Root and Kernel File Systems. Jun 29 18:28:41 hp-4300G kernel: audit: type=1130 audit(1625016521.443:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:41 hp-4300G systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 263 (systemd-binfmt) Jun 29 18:28:41 hp-4300G systemd[1]: Mounting Arbitrary Executable File Formats File System... Jun 29 18:28:41 hp-4300G systemd[1]: Mounting FUSE Control File System... Jun 29 18:28:41 hp-4300G systemd[1]: Mounting Kernel Configuration File System... Jun 29 18:28:41 hp-4300G systemd[1]: Condition check resulted in First Boot Wizard being skipped. Jun 29 18:28:41 hp-4300G systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Jun 29 18:28:41 hp-4300G systemd[1]: Starting Load/Save Random Seed... Jun 29 18:28:41 hp-4300G systemd[1]: Starting Apply Kernel Variables... Jun 29 18:28:41 hp-4300G systemd[1]: Starting Create System Users... Jun 29 18:28:41 hp-4300G systemd[1]: [email protected]: Deactivated successfully. Jun 29 18:28:41 hp-4300G systemd[1]: Finished Load Kernel Module drm. Jun 29 18:28:41 hp-4300G kernel: audit: type=1130 audit(1625016521.453:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:41 hp-4300G kernel: audit: type=1131 audit(1625016521.453:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:41 hp-4300G systemd[1]: Mounted Arbitrary Executable File Formats File System. Jun 29 18:28:41 hp-4300G systemd[1]: Mounted FUSE Control File System. Jun 29 18:28:41 hp-4300G systemd[1]: Mounted Kernel Configuration File System. Jun 29 18:28:41 hp-4300G systemd[1]: Finished Load/Save Random Seed. Jun 29 18:28:41 hp-4300G systemd[1]: Finished Set Up Additional Binary Formats. Jun 29 18:28:41 hp-4300G systemd[1]: Finished Apply Kernel Variables. Jun 29 18:28:41 hp-4300G systemd[1]: Condition check resulted in First Boot Complete being skipped. Jun 29 18:28:41 hp-4300G systemd[1]: Finished Create System Users. Jun 29 18:28:41 hp-4300G systemd[1]: Starting Create Static Device Nodes in /dev... Jun 29 18:28:41 hp-4300G systemd[1]: Started Journal Service. Jun 29 18:28:41 hp-4300G kernel: usb 1-11: new full-speed USB device number 2 using xhci_hcd Jun 29 18:28:41 hp-4300G kernel: acpi_cpufreq: overriding BIOS provided _PSD data Jun 29 18:28:41 hp-4300G kernel: acpi-tad ACPI000E:00: Missing _PRW Jun 29 18:28:41 hp-4300G kernel: ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) Jun 29 18:28:41 hp-4300G kernel: acpi device:1e: registered as cooling_device8 Jun 29 18:28:41 hp-4300G kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input2 Jun 29 18:28:41 hp-4300G kernel: acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) Jun 29 18:28:41 hp-4300G kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 Jun 29 18:28:41 hp-4300G kernel: piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection Jun 29 18:28:41 hp-4300G kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 Jun 29 18:28:41 hp-4300G kernel: ccp 0000:0c:00.2: enabling device (0100 -> 0102) Jun 29 18:28:41 hp-4300G kernel: ccp 0000:0c:00.2: ccp: unable to access the device: you might be running a broken BIOS. Jun 29 18:28:41 hp-4300G kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3 Jun 29 18:28:41 hp-4300G kernel: ccp 0000:0c:00.2: tee enabled Jun 29 18:28:41 hp-4300G kernel: ccp 0000:0c:00.2: psp enabled Jun 29 18:28:41 hp-4300G kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database Jun 29 18:28:41 hp-4300G kernel: FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Jun 29 18:28:41 hp-4300G kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Jun 29 18:28:41 hp-4300G kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Jun 29 18:28:41 hp-4300G kernel: cfg80211: failed to load regulatory.db Jun 29 18:28:41 hp-4300G kernel: usb 1-11: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 Jun 29 18:28:41 hp-4300G kernel: usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 29 18:28:41 hp-4300G kernel: usb 1-11: Product: USB Receiver Jun 29 18:28:41 hp-4300G kernel: usb 1-11: Manufacturer: Logitech Jun 29 18:28:41 hp-4300G kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver Jun 29 18:28:41 hp-4300G kernel: sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address Jun 29 18:28:41 hp-4300G kernel: sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) Jun 29 18:28:41 hp-4300G kernel: RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer Jun 29 18:28:41 hp-4300G kernel: RAPL PMU: hw unit of domain package 2^-16 Joules Jun 29 18:28:41 hp-4300G kernel: cryptd: max_cpu_qlen set to 1000 Jun 29 18:28:41 hp-4300G kernel: AVX2 version of gcm_enc/dec engaged. Jun 29 18:28:41 hp-4300G kernel: AES CTR mode by8 optimization enabled Jun 29 18:28:41 hp-4300G kernel: libphy: r8169: probed Jun 29 18:28:41 hp-4300G kernel: r8169 0000:0a:00.0 eth0: RTL8168h/8111h, 00:68:eb:ad:98:43, XID 541, IRQ 91 Jun 29 18:28:41 hp-4300G kernel: r8169 0000:0a:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] Jun 29 18:28:41 hp-4300G kernel: snd_hda_intel 0000:0c:00.1: enabling device (0100 -> 0102) Jun 29 18:28:41 hp-4300G kernel: snd_hda_intel 0000:0c:00.1: Handle vga_switcheroo audio client Jun 29 18:28:41 hp-4300G kernel: snd_hda_intel 0000:0c:00.6: enabling device (0100 -> 0102) Jun 29 18:28:42 hp-4300G kernel: r8169 0000:0a:00.0 enp10s0: renamed from eth0 Jun 29 18:28:42 hp-4300G kernel: usb 1-12: new full-speed USB device number 3 using xhci_hcd Jun 29 18:28:42 hp-4300G kernel: rtw_8821ce 0000:09:00.0: enabling device (0100 -> 0103) Jun 29 18:28:42 hp-4300G kernel: rtw_8821ce 0000:09:00.0: Firmware version 24.8.0, H2C version 12 Jun 29 18:28:42 hp-4300G kernel: input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input5 Jun 29 18:28:42 hp-4300G kernel: input: HP WMI hotkeys as /devices/virtual/input/input4 Jun 29 18:28:42 hp-4300G kernel: Generic FE-GE Realtek PHY r8169-a00:00: attached PHY driver (mii_bus:phy_addr=r8169-a00:00, irq=MAC) Jun 29 18:28:42 hp-4300G kernel: [drm] amdgpu kernel modesetting enabled. Jun 29 18:28:42 hp-4300G kernel: Virtual CRAT table created for CPU Jun 29 18:28:42 hp-4300G kernel: amdgpu: Topology: Add CPU node Jun 29 18:28:42 hp-4300G kernel: checking generic (d0000000 300000) vs hw (d0000000 10000000) Jun 29 18:28:42 hp-4300G kernel: fb0: switching to amdgpudrmfb from EFI VGA Jun 29 18:28:42 hp-4300G kernel: Console: switching to colour dummy device 80x25 Jun 29 18:28:42 hp-4300G kernel: amdgpu 0000:0c:00.0: vgaarb: deactivate vga console Jun 29 18:28:42 hp-4300G kernel: amdgpu 0000:0c:00.0: enabling device (0106 -> 0107) Jun 29 18:28:42 hp-4300G kernel: [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87D6 0xCA). Jun 29 18:28:42 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) Jun 29 18:28:42 hp-4300G kernel: [drm] register mmio base: 0xFCA00000 Jun 29 18:28:42 hp-4300G kernel: [drm] register mmio size: 524288 Jun 29 18:28:42 hp-4300G kernel: [drm] PCIE atomic ops is not supported Jun 29 18:28:42 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC671: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line Jun 29 18:28:42 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) Jun 29 18:28:42 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) Jun 29 18:28:42 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 Jun 29 18:28:42 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: inputs: Jun 29 18:28:42 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 Jun 29 18:28:42 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: Line=0x1b Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 0 <soc15_common> Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 1 <gmc_v9_0> Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 2 <vega10_ih> Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 3 <psp> Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 4 <smu> Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 5 <gfx_v9_0> Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 6 <sdma_v4_0> Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 7 <dm> Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 8 <vcn_v2_0> Jun 29 18:28:42 hp-4300G kernel: [drm] add ip block number 9 <jpeg_v2_0> Jun 29 18:28:42 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: Fetched VBIOS from VFCT Jun 29 18:28:42 hp-4300G kernel: amdgpu: ATOM BIOS: 113-RENOIR-026 Jun 29 18:28:42 hp-4300G kernel: [drm] VCN decode is enabled in VM mode Jun 29 18:28:42 hp-4300G kernel: [drm] VCN encode is enabled in VM mode Jun 29 18:28:42 hp-4300G kernel: [drm] JPEG decode is enabled in VM mode Jun 29 18:28:42 hp-4300G kernel: [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit Jun 29 18:28:42 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) Jun 29 18:28:42 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF Jun 29 18:28:42 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF Jun 29 18:28:42 hp-4300G kernel: [drm] Detected VRAM RAM=512M, BAR=512M Jun 29 18:28:42 hp-4300G kernel: [drm] RAM width 64bits DDR4 Jun 29 18:28:42 hp-4300G kernel: [TTM] Zone kernel: Available graphics memory: 3750314 KiB Jun 29 18:28:42 hp-4300G kernel: [TTM] Zone dma32: Available graphics memory: 2097152 KiB Jun 29 18:28:42 hp-4300G kernel: [drm] amdgpu: 512M of VRAM memory ready Jun 29 18:28:42 hp-4300G kernel: [drm] amdgpu: 3072M of GTT memory ready. Jun 29 18:28:42 hp-4300G kernel: BUG: unable to handle page fault for address: 00000000003a8290 Jun 29 18:28:42 hp-4300G kernel: #PF: supervisor write access in kernel mode Jun 29 18:28:42 hp-4300G kernel: #PF: error_code(0x0002) - not-present page Jun 29 18:28:42 hp-4300G kernel: PGD 0 P4D 0 Jun 29 18:28:42 hp-4300G kernel: Oops: 0002 [#1] PREEMPT SMP NOPTI Jun 29 18:28:42 hp-4300G kernel: CPU: 2 PID: 296 Comm: systemd-udevd Not tainted 5.12.0-rc3-00025-gaf452ec1b1a3 #1 Jun 29 18:28:42 hp-4300G kernel: Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 Jun 29 18:28:42 hp-4300G kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x1c2/0x200 Jun 29 18:28:42 hp-4300G kernel: Code: ff ff f3 90 8b 02 85 c0 74 ee eb f6 c1 ef 12 83 e0 03 83 ef 01 48 c1 e0 05 48 63 ff 48 05 80 d5 02 00 48 03 04 fd 00 69 e3 a9 <48> 89 08 8b 41 08 85 c0 75 09 f3 90 8b 41 08 85 c0 74 f7 48 8b 39 Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: Call Trace: Jun 29 18:28:42 hp-4300G kernel: _raw_spin_lock_irqsave+0x39/0x50 Jun 29 18:28:42 hp-4300G kernel: swiotlb_tbl_map_single+0x12b/0x4c0 Jun 29 18:28:42 hp-4300G kernel: ? sysvec_call_function+0xb/0x90 Jun 29 18:28:42 hp-4300G kernel: ? asm_sysvec_call_function+0x12/0x20 Jun 29 18:28:42 hp-4300G kernel: swiotlb_map+0x5d/0x260 Jun 29 18:28:42 hp-4300G kernel: dma_map_page_attrs+0x151/0x220 Jun 29 18:28:42 hp-4300G kernel: amdgpu_gart_init+0x43/0x90 [amdgpu] Jun 29 18:28:42 hp-4300G kernel: gmc_v9_0_sw_init+0x51c/0x560 [amdgpu] Jun 29 18:28:42 hp-4300G kernel: amdgpu_device_init.cold+0x120e/0x19d7 [amdgpu] Jun 29 18:28:42 hp-4300G kernel: ? pci_conf1_read+0x9b/0xf0 Jun 29 18:28:42 hp-4300G kernel: ? pci_bus_read_config_word+0x49/0x70 Jun 29 18:28:42 hp-4300G kernel: amdgpu_driver_load_kms+0x65/0x260 [amdgpu] Jun 29 18:28:42 hp-4300G kernel: amdgpu_pci_probe+0x11f/0x1b0 [amdgpu] Jun 29 18:28:42 hp-4300G kernel: local_pci_probe+0x42/0x80 Jun 29 18:28:42 hp-4300G kernel: ? pci_match_device+0xd7/0x110 Jun 29 18:28:42 hp-4300G kernel: pci_device_probe+0xfa/0x1b0 Jun 29 18:28:42 hp-4300G kernel: really_probe+0xf2/0x440 Jun 29 18:28:42 hp-4300G kernel: driver_probe_device+0xe1/0x150 Jun 29 18:28:42 hp-4300G kernel: device_driver_attach+0xa1/0xb0 Jun 29 18:28:42 hp-4300G kernel: __driver_attach+0x8a/0x150 Jun 29 18:28:42 hp-4300G kernel: ? device_driver_attach+0xb0/0xb0 Jun 29 18:28:42 hp-4300G kernel: ? device_driver_attach+0xb0/0xb0 Jun 29 18:28:42 hp-4300G kernel: bus_for_each_dev+0x78/0xc0 Jun 29 18:28:42 hp-4300G kernel: bus_add_driver+0x12b/0x1e0 Jun 29 18:28:42 hp-4300G kernel: driver_register+0x8f/0xe0 Jun 29 18:28:42 hp-4300G kernel: ? 0xffffffffc1c42000 Jun 29 18:28:42 hp-4300G kernel: do_one_initcall+0x44/0x200 Jun 29 18:28:42 hp-4300G kernel: ? do_init_module+0x23/0x260 Jun 29 18:28:42 hp-4300G kernel: ? kmem_cache_alloc_trace+0x161/0x2d0 Jun 29 18:28:42 hp-4300G kernel: do_init_module+0x5c/0x260 Jun 29 18:28:42 hp-4300G kernel: __do_sys_finit_module+0xb1/0x110 Jun 29 18:28:42 hp-4300G kernel: do_syscall_64+0x33/0x40 Jun 29 18:28:42 hp-4300G kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae Jun 29 18:28:42 hp-4300G kernel: RIP: 0033:0x7f1f892be18d Jun 29 18:28:42 hp-4300G kernel: Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 Jun 29 18:28:42 hp-4300G kernel: RSP: 002b:00007ffd0caa5d58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 Jun 29 18:28:42 hp-4300G kernel: RAX: ffffffffffffffda RBX: 000055f12c90e9c0 RCX: 00007f1f892be18d Jun 29 18:28:42 hp-4300G kernel: RDX: 0000000000000000 RSI: 00007f1f8941ba9d RDI: 0000000000000018 Jun 29 18:28:42 hp-4300G kernel: RBP: 0000000000020000 R08: 0000000000000000 R09: 00007f1f8964e5ea Jun 29 18:28:42 hp-4300G kernel: R10: 0000000000000018 R11: 0000000000000246 R12: 00007f1f8941ba9d Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000000000 R14: 000055f12c90ac20 R15: 000055f12c90e9c0 Jun 29 18:28:42 hp-4300G kernel: Modules linked in: kvm_amd(+) snd_hda_codec_realtek(+) amdgpu(+) rtw88_8821ce(+) snd_hda_codec_generic hp_wmi wmi_bmof sparse_keymap fjes(-) ledtrig_audio snd_hda_codec_hdmi pcc_cpufreq(-) kvm rtw88_8821c gpu_sched i2c_algo_bit drm_ttm_helper rtw88_pci snd_hda_intel ttm irqbypass snd_intel_dspcfg crct10dif_pclmul drm_kms_helper rtw88_core crc32_pclmul snd_intel_sdw_acpi ghash_clmulni_intel snd_hda_codec cec mac80211 snd_hda_core syscopyarea snd_hwdep aesni_intel snd_pcm crypto_simd snd_timer cryptd sysfillrect sp5100_tco rapl snd r8169 sysimgblt vfat pcspkr i2c_piix4 k10temp fat ccp soundcore fb_sys_fops cfg80211 realtek mdio_devres libphy rfkill libarc4 wmi video tpm_crb tpm_tis gpio_amdpt gpio_generic tpm_tis_core tpm mac_hid rng_core pinctrl_amd acpi_tad acpi_cpufreq drm pkcs8_key_parser fuse agpgart bpf_preload ip_tables x_tables xfs libcrc32c crc32c_generic crc32c_intel xhci_pci xhci_pci_renesas Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 Jun 29 18:28:42 hp-4300G kernel: ---[ end trace f6c00070cdcfa658 ]--- Jun 29 18:28:42 hp-4300G kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x1c2/0x200 Jun 29 18:28:42 hp-4300G kernel: Code: ff ff f3 90 8b 02 85 c0 74 ee eb f6 c1 ef 12 83 e0 03 83 ef 01 48 c1 e0 05 48 63 ff 48 05 80 d5 02 00 48 03 04 fd 00 69 e3 a9 <48> 89 08 8b 41 08 85 c0 75 09 f3 90 8b 41 08 85 c0 74 f7 48 8b 39 Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: note: systemd-udevd[296] exited with preempt_count 1 Jun 29 18:28:42 hp-4300G kernel: kvm: Nested Virtualization enabled Jun 29 18:28:42 hp-4300G kernel: SVM: kvm: Nested Paging enabled Jun 29 18:28:42 hp-4300G kernel: SVM: Virtual VMLOAD VMSAVE supported Jun 29 18:28:42 hp-4300G kernel: SVM: Virtual GIF supported Jun 29 18:28:42 hp-4300G kernel: input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input6 Jun 29 18:28:42 hp-4300G kernel: input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input7 Jun 29 18:28:42 hp-4300G kernel: input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input8 Jun 29 18:28:42 hp-4300G kernel: input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input9 Jun 29 18:28:42 hp-4300G kernel: MCE: In-kernel MCE decoding enabled. Jun 29 18:28:42 hp-4300G kernel: r8169 0000:0a:00.0 enp10s0: Link is Down Jun 29 18:28:42 hp-4300G kernel: intel_rapl_common: Found RAPL domain package Jun 29 18:28:42 hp-4300G kernel: intel_rapl_common: Found RAPL domain core Jun 29 18:28:42 hp-4300G kernel: usb 1-12: New USB device found, idVendor=0bda, idProduct=b00a, bcdDevice= 1.10 Jun 29 18:28:42 hp-4300G kernel: usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 29 18:28:42 hp-4300G kernel: usb 1-12: Product: Bluetooth Radio Jun 29 18:28:42 hp-4300G kernel: usb 1-12: Manufacturer: Realtek Jun 29 18:28:42 hp-4300G kernel: usb 1-12: SerialNumber: 00e04c000001 Jun 29 18:28:42 hp-4300G kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.0/0003:046D:C534.0001/input/input10 Jun 29 18:28:42 hp-4300G kernel: Bluetooth: Core ver 2.22 Jun 29 18:28:42 hp-4300G kernel: NET: Registered protocol family 31 Jun 29 18:28:42 hp-4300G kernel: Bluetooth: HCI device and connection manager initialized Jun 29 18:28:42 hp-4300G kernel: Bluetooth: HCI socket layer initialized Jun 29 18:28:42 hp-4300G kernel: Bluetooth: L2CAP socket layer initialized Jun 29 18:28:42 hp-4300G kernel: Bluetooth: SCO socket layer initialized Jun 29 18:28:42 hp-4300G kernel: usbcore: registered new interface driver btusb Jun 29 18:28:42 hp-4300G kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821 Jun 29 18:28:42 hp-4300G kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1 Jun 29 18:28:42 hp-4300G kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin Jun 29 18:28:42 hp-4300G kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin Jun 29 18:28:42 hp-4300G kernel: Bluetooth: hci0: RTL: cfg_sz 10, total sz 31990 Jun 29 18:28:42 hp-4300G kernel: hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 Jun 29 18:28:42 hp-4300G kernel: rtw_8821ce 0000:09:00.0: start vif 74:12:b3:a0:4a:cb on port 0 Jun 29 18:28:43 hp-4300G kernel: input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input11 Jun 29 18:28:43 hp-4300G kernel: input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input12 Jun 29 18:28:43 hp-4300G kernel: input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input13 Jun 29 18:28:43 hp-4300G kernel: hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 Jun 29 18:28:43 hp-4300G kernel: usbcore: registered new interface driver usbhid Jun 29 18:28:43 hp-4300G kernel: usbhid: USB HID core driver Jun 29 18:28:43 hp-4300G kernel: logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 Jun 29 18:28:43 hp-4300G kernel: Bluetooth: hci0: RTL: fw version 0x829a7644 Jun 29 18:28:44 hp-4300G kernel: logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 Jun 29 18:28:44 hp-4300G kernel: logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 Jun 29 18:28:44 hp-4300G kernel: logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 Jun 29 18:28:44 hp-4300G kernel: mousedev: PS/2 mouse device common for all mice Jun 29 18:28:44 hp-4300G kernel: input: Logitech Wireless Keyboard PID:4075 Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input16 Jun 29 18:28:44 hp-4300G kernel: hid-generic 0003:046D:4075.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 Jun 29 18:28:44 hp-4300G kernel: input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input21 Jun 29 18:28:44 hp-4300G kernel: logitech-hidpp-device 0003:046D:4054.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:01:00.0-11/input1:2 Jun 29 18:28:44 hp-4300G kernel: input: Logitech Wireless Keyboard PID:4075 as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input22 Jun 29 18:28:44 hp-4300G kernel: logitech-hidpp-device 0003:046D:4075.0003: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 Jun 29 18:28:45 hp-4300G kernel: r8169 0000:0a:00.0 enp10s0: Link is Up - 1Gbps/Full - flow control rx/tx Jun 29 18:28:45 hp-4300G kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready Jun 29 18:28:47 hp-4300G kernel: kauditd_printk_skb: 35 callbacks suppressed Jun 29 18:28:47 hp-4300G kernel: audit: type=1131 audit(1625016527.419:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:28:50 hp-4300G kernel: irq 7: nobody cared (try booting with the "irqpoll" option) Jun 29 18:28:50 hp-4300G kernel: CPU: 4 PID: 0 Comm: swapper/4 Tainted: G D 5.12.0-rc3-00025-gaf452ec1b1a3 #1 Jun 29 18:28:50 hp-4300G kernel: Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 Jun 29 18:28:50 hp-4300G kernel: Call Trace: Jun 29 18:28:50 hp-4300G kernel: <IRQ> Jun 29 18:28:50 hp-4300G kernel: dump_stack+0x76/0x94 Jun 29 18:28:50 hp-4300G kernel: __report_bad_irq+0x35/0xaa Jun 29 18:28:50 hp-4300G kernel: note_interrupt.cold+0xb/0x64 Jun 29 18:28:50 hp-4300G kernel: handle_irq_event+0xa9/0xb0 Jun 29 18:28:50 hp-4300G kernel: handle_fasteoi_irq+0x8a/0x1f0 Jun 29 18:28:50 hp-4300G kernel: __common_interrupt+0x41/0xa0 Jun 29 18:28:50 hp-4300G kernel: common_interrupt+0x7e/0xa0 Jun 29 18:28:50 hp-4300G kernel: </IRQ> Jun 29 18:28:50 hp-4300G kernel: asm_common_interrupt+0x1e/0x40 Jun 29 18:28:50 hp-4300G kernel: RIP: 0010:cpuidle_enter_state+0xc7/0x380 Jun 29 18:28:50 hp-4300G kernel: Code: 8b 3d d5 18 e2 56 e8 e8 b4 8d ff 49 89 c5 0f 1f 44 00 00 31 ff e8 e9 c1 8d ff 45 84 ff 0f 85 da 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 11 01 00 00 49 63 d6 4c 2b 2c 24 48 8d 04 52 48 8d Jun 29 18:28:50 hp-4300G kernel: RSP: 0018:ffffadb4001a7ea8 EFLAGS: 00000246 Jun 29 18:28:50 hp-4300G kernel: RAX: ffff89005732c7c0 RBX: 0000000000000003 RCX: 000000000000001f Jun 29 18:28:50 hp-4300G kernel: RDX: 0000000000000000 RSI: 000000002182bb3a RDI: 0000000000000000 Jun 29 18:28:50 hp-4300G kernel: RBP: ffff88ff43cea800 R08: 00000002ce7b160d R09: 000000031c28bc9a Jun 29 18:28:50 hp-4300G kernel: R10: 0000000000000002 R11: 0000000000000002 R12: ffffffffaa149be0 Jun 29 18:28:50 hp-4300G kernel: R13: 00000002ce7b160d R14: 0000000000000003 R15: 0000000000000000 Jun 29 18:28:50 hp-4300G kernel: ? cpuidle_enter_state+0xb7/0x380 Jun 29 18:28:50 hp-4300G kernel: cpuidle_enter+0x29/0x40 Jun 29 18:28:50 hp-4300G kernel: do_idle+0x1d5/0x270 Jun 29 18:28:50 hp-4300G kernel: cpu_startup_entry+0x19/0x20 Jun 29 18:28:50 hp-4300G kernel: secondary_startup_64_no_verify+0xc2/0xcb Jun 29 18:28:50 hp-4300G kernel: handlers: Jun 29 18:28:50 hp-4300G kernel: [<00000000e83c4a82>] amd_gpio_irq_handler [pinctrl_amd] Jun 29 18:28:50 hp-4300G kernel: Disabling IRQ #7 Jun 29 18:29:54 hp-4300G kernel: audit: type=1101 audit(1625016594.700:47): pid=429 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' Jun 29 18:29:54 hp-4300G kernel: audit: type=1103 audit(1625016594.703:48): pid=429 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' Jun 29 18:29:54 hp-4300G kernel: audit: type=1006 audit(1625016594.703:49): pid=429 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 Jun 29 18:29:54 hp-4300G kernel: audit: type=1300 audit(1625016594.703:49): arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7fffd1265250 a2=4 a3=3e8 items=0 ppid=359 pid=429 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="sshd" exe="/usr/bin/sshd" key=(null) Jun 29 18:29:54 hp-4300G kernel: audit: type=1327 audit(1625016594.703:49): proctitle=737368643A206E617468616E205B707269765D Jun 29 18:29:54 hp-4300G kernel: audit: type=1130 audit(1625016594.716:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:29:54 hp-4300G kernel: audit: type=1101 audit(1625016594.720:51): pid=432 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:29:54 hp-4300G kernel: audit: type=1103 audit(1625016594.720:52): pid=432 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' Jun 29 18:29:54 hp-4300G kernel: audit: type=1006 audit(1625016594.723:53): pid=432 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1 Jun 29 18:29:54 hp-4300G kernel: audit: type=1300 audit(1625016594.723:53): arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7ffd5ba43a80 a2=4 a3=3e8 items=0 ppid=1 pid=432 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null) -- Journal begins at Mon 2021-06-28 09:22:12 MST, ends at Tue 2021-06-29 18:40:31 MST. -- Jun 29 18:40:01 hp-4300G kernel: Linux version 5.12.0-rc3-00024-gf127c9556a8e (nathan@archlinux-ax161) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.50.20210627) #1 SMP PREEMPT Tue Jun 29 18:31:18 MST 2021 Jun 29 18:40:01 hp-4300G kernel: Command line: initrd=\amd-ucode.img initrd=\initramfs-linux-next-llvm.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp irqpoll Jun 29 18:40:01 hp-4300G kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' Jun 29 18:40:01 hp-4300G kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' Jun 29 18:40:01 hp-4300G kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' Jun 29 18:40:01 hp-4300G kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 Jun 29 18:40:01 hp-4300G kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. Jun 29 18:40:01 hp-4300G kernel: BIOS-provided physical RAM map: Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000009c0ffff] usable Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x0000000009c10000-0x0000000009ffffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x000000000a20d000-0x000000000affffff] usable Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x000000000b020000-0x00000000b838ffff] usable Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000b8a15000-0x00000000badfefff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000badff000-0x00000000bbffffff] usable Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000bc000000-0x00000000bdffffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable Jun 29 18:40:01 hp-4300G kernel: BIOS-e820: [mem 0x000000021f380000-0x000000023fffffff] reserved Jun 29 18:40:01 hp-4300G kernel: intel_pstate: HWP disabled Jun 29 18:40:01 hp-4300G kernel: NX (Execute Disable) protection: active Jun 29 18:40:01 hp-4300G kernel: e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable Jun 29 18:40:01 hp-4300G kernel: e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable Jun 29 18:40:01 hp-4300G kernel: extended physical RAM map: Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x0000000000100000-0x0000000009c0ffff] usable Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x0000000009c10000-0x0000000009ffffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x000000000a20d000-0x000000000affffff] usable Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x000000000b020000-0x00000000b4c66017] usable Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000b4c66018-0x00000000b4c73457] usable Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000b4c73458-0x00000000b838ffff] usable Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000b8a15000-0x00000000badfefff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000badff000-0x00000000bbffffff] usable Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000bc000000-0x00000000bdffffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000bf000000-0x00000000bfffffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x0000000100000000-0x000000021f37ffff] usable Jun 29 18:40:01 hp-4300G kernel: reserve setup_data: [mem 0x000000021f380000-0x000000023fffffff] reserved Jun 29 18:40:01 hp-4300G kernel: efi: EFI v2.70 by American Megatrends Jun 29 18:40:01 hp-4300G kernel: efi: ACPI=0xb8721000 ACPI 2.0=0xb8721014 TPMFinalLog=0xb89c8000 SMBIOS=0xbac0f000 SMBIOS 3.0=0xbac0e000 MEMATTR=0xb5184018 ESRT=0xb6dde918 RNG=0xbac3e998 TPMEventLog=0xb5185018 Jun 29 18:40:01 hp-4300G kernel: efi: seeding entropy pool Jun 29 18:40:01 hp-4300G kernel: SMBIOS 3.3.0 present. Jun 29 18:40:01 hp-4300G kernel: DMI: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 Jun 29 18:40:01 hp-4300G kernel: tsc: Fast TSC calibration using PIT Jun 29 18:40:01 hp-4300G kernel: tsc: Detected 3792.694 MHz processor Jun 29 18:40:01 hp-4300G kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Jun 29 18:40:01 hp-4300G kernel: e820: remove [mem 0x000a0000-0x000fffff] usable Jun 29 18:40:01 hp-4300G kernel: last_pfn = 0x21f380 max_arch_pfn = 0x400000000 Jun 29 18:40:01 hp-4300G kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Jun 29 18:40:01 hp-4300G kernel: e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved Jun 29 18:40:01 hp-4300G kernel: last_pfn = 0xbc000 max_arch_pfn = 0x400000000 Jun 29 18:40:01 hp-4300G kernel: esrt: Reserving ESRT space from 0x00000000b6dde918 to 0x00000000b6dde950. Jun 29 18:40:01 hp-4300G kernel: e820: update [mem 0xb6dde000-0xb6ddefff] usable ==> reserved Jun 29 18:40:01 hp-4300G kernel: check: Scanning 1 areas for low memory corruption Jun 29 18:40:01 hp-4300G kernel: Using GB pages for direct mapping Jun 29 18:40:01 hp-4300G kernel: Secure boot disabled Jun 29 18:40:01 hp-4300G kernel: RAMDISK: [mem 0x7f859000-0x7fff5fff] Jun 29 18:40:01 hp-4300G kernel: ACPI: Early table checksum verification disabled Jun 29 18:40:01 hp-4300G kernel: ACPI: RSDP 0x00000000B8721014 000024 (v02 HPQOEM) Jun 29 18:40:01 hp-4300G kernel: ACPI: XSDT 0x00000000B8720728 0000EC (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) Jun 29 18:40:01 hp-4300G kernel: ACPI: FACP 0x00000000B870F000 000114 (v06 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:40:01 hp-4300G kernel: ACPI: DSDT 0x00000000B86FE000 01050C (v02 HPQOEM SLIC-CPC 01072009 INTL 20120913) Jun 29 18:40:01 hp-4300G kernel: ACPI: FACS 0x00000000B89F8000 000040 Jun 29 18:40:01 hp-4300G kernel: ACPI: MSDM 0x00000000B871F000 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI 01000013) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B871E000 000050 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:40:01 hp-4300G kernel: ACPI: IVRS 0x00000000B871D000 0000D0 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000000) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B8715000 007229 (v02 HPQOEM SLIC-CPC 00000002 MSFT 04000000) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B8711000 003BA1 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B8710000 000094 (v02 HPQOEM SLIC-CPC 01072009 AMI 01072009) Jun 29 18:40:01 hp-4300G kernel: ACPI: FIDT 0x00000000B86FD000 00009C (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:40:01 hp-4300G kernel: ACPI: MCFG 0x00000000B86FC000 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00010013) Jun 29 18:40:01 hp-4300G kernel: ACPI: HPET 0x00000000B86FB000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00000005) Jun 29 18:40:01 hp-4300G kernel: ACPI: VFCT 0x00000000B86ED000 00D484 (v01 HPQOEM SLIC-CPC 00000001 AMD 31504F47) Jun 29 18:40:01 hp-4300G kernel: ACPI: BGRT 0x00000000B86EC000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:40:01 hp-4300G kernel: ACPI: TPM2 0x00000000B86EB000 00004C (v04 HPQOEM SLIC-CPC 00000001 AMI 00000000) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B86E9000 001CE4 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000001) Jun 29 18:40:01 hp-4300G kernel: ACPI: CRAT 0x00000000B86E8000 0007E8 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) Jun 29 18:40:01 hp-4300G kernel: ACPI: CDIT 0x00000000B86E7000 000029 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B86E6000 000D37 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B86E4000 0010A5 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B86E0000 00333E (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B86DF000 0000BF (v01 HPQOEM SLIC-CPC 00001000 INTL 20120913) Jun 29 18:40:01 hp-4300G kernel: ACPI: WSMT 0x00000000B86DE000 000028 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:40:01 hp-4300G kernel: ACPI: APIC 0x00000000B86DD000 00015E (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B86DC000 000517 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:40:01 hp-4300G kernel: ACPI: SSDT 0x00000000B86DA000 0010AF (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) Jun 29 18:40:01 hp-4300G kernel: ACPI: FPDT 0x00000000B86D9000 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) Jun 29 18:40:01 hp-4300G kernel: ACPI: Local APIC address 0xfee00000 Jun 29 18:40:01 hp-4300G kernel: No NUMA configuration found Jun 29 18:40:01 hp-4300G kernel: Faking a node at [mem 0x0000000000000000-0x000000021f37ffff] Jun 29 18:40:01 hp-4300G kernel: NODE_DATA(0) allocated [mem 0x21f37c000-0x21f37ffff] Jun 29 18:40:01 hp-4300G kernel: Zone ranges: Jun 29 18:40:01 hp-4300G kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff] Jun 29 18:40:01 hp-4300G kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Jun 29 18:40:01 hp-4300G kernel: Normal [mem 0x0000000100000000-0x000000021f37ffff] Jun 29 18:40:01 hp-4300G kernel: Device empty Jun 29 18:40:01 hp-4300G kernel: Movable zone start for each node Jun 29 18:40:01 hp-4300G kernel: Early memory node ranges Jun 29 18:40:01 hp-4300G kernel: node 0: [mem 0x0000000000001000-0x000000000009ffff] Jun 29 18:40:01 hp-4300G kernel: node 0: [mem 0x0000000000100000-0x0000000009c0ffff] Jun 29 18:40:01 hp-4300G kernel: node 0: [mem 0x000000000a000000-0x000000000a1fffff] Jun 29 18:40:01 hp-4300G kernel: node 0: [mem 0x000000000a20d000-0x000000000affffff] Jun 29 18:40:01 hp-4300G kernel: node 0: [mem 0x000000000b020000-0x00000000b838ffff] Jun 29 18:40:01 hp-4300G kernel: node 0: [mem 0x00000000badff000-0x00000000bbffffff] Jun 29 18:40:01 hp-4300G kernel: node 0: [mem 0x0000000100000000-0x000000021f37ffff] Jun 29 18:40:01 hp-4300G kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff] Jun 29 18:40:01 hp-4300G kernel: On node 0 totalpages: 1934483 Jun 29 18:40:01 hp-4300G kernel: DMA zone: 64 pages used for memmap Jun 29 18:40:01 hp-4300G kernel: DMA zone: 26 pages reserved Jun 29 18:40:01 hp-4300G kernel: DMA zone: 3999 pages, LIFO batch:0 Jun 29 18:40:01 hp-4300G kernel: DMA zone: 28769 pages in unavailable ranges Jun 29 18:40:01 hp-4300G kernel: DMA32 zone: 11782 pages used for memmap Jun 29 18:40:01 hp-4300G kernel: DMA32 zone: 754036 pages, LIFO batch:63 Jun 29 18:40:01 hp-4300G kernel: DMA32 zone: 28300 pages in unavailable ranges Jun 29 18:40:01 hp-4300G kernel: Normal zone: 18382 pages used for memmap Jun 29 18:40:01 hp-4300G kernel: Normal zone: 1176448 pages, LIFO batch:63 Jun 29 18:40:01 hp-4300G kernel: Normal zone: 3200 pages in unavailable ranges Jun 29 18:40:01 hp-4300G kernel: ACPI: PM-Timer IO Port: 0x808 Jun 29 18:40:01 hp-4300G kernel: ACPI: Local APIC address 0xfee00000 Jun 29 18:40:01 hp-4300G kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Jun 29 18:40:01 hp-4300G kernel: IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 Jun 29 18:40:01 hp-4300G kernel: IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 Jun 29 18:40:01 hp-4300G kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Jun 29 18:40:01 hp-4300G kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Jun 29 18:40:01 hp-4300G kernel: ACPI: IRQ0 used by override. Jun 29 18:40:01 hp-4300G kernel: ACPI: IRQ9 used by override. Jun 29 18:40:01 hp-4300G kernel: Using ACPI (MADT) for SMP configuration information Jun 29 18:40:01 hp-4300G kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000 Jun 29 18:40:01 hp-4300G kernel: e820: update [mem 0xb5158000-0xb517ffff] usable ==> reserved Jun 29 18:40:01 hp-4300G kernel: smpboot: Allowing 32 CPUs, 24 hotplug CPUs Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x09c10000-0x09ffffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb4c66000-0xb4c66fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb4c73000-0xb4c73fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb5158000-0xb517ffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb6dde000-0xb6ddefff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb8390000-0xb86c5fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb86c6000-0xb8721fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb8722000-0xb8a14fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xb8a15000-0xbadfefff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xbc000000-0xbdffffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbeffffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd6fffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff] Jun 29 18:40:01 hp-4300G kernel: PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] Jun 29 18:40:01 hp-4300G kernel: [mem 0xc0000000-0xefffffff] available for PCI devices Jun 29 18:40:01 hp-4300G kernel: Booting paravirtualized kernel on bare hardware Jun 29 18:40:01 hp-4300G kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns Jun 29 18:40:01 hp-4300G kernel: setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1 Jun 29 18:40:01 hp-4300G kernel: percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144 Jun 29 18:40:01 hp-4300G kernel: pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152 Jun 29 18:40:01 hp-4300G kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 Jun 29 18:40:01 hp-4300G kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 Jun 29 18:40:01 hp-4300G kernel: Built 1 zonelists, mobility grouping on. Total pages: 1904229 Jun 29 18:40:01 hp-4300G kernel: Policy zone: Normal Jun 29 18:40:01 hp-4300G kernel: Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux-next-llvm.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp irqpoll Jun 29 18:40:01 hp-4300G kernel: Misrouted IRQ fixup and polling support enabled Jun 29 18:40:01 hp-4300G kernel: This may significantly impact system performance Jun 29 18:40:01 hp-4300G kernel: printk: log_buf_len individual max cpu contribution: 4096 bytes Jun 29 18:40:01 hp-4300G kernel: printk: log_buf_len total cpu_extra contributions: 126976 bytes Jun 29 18:40:01 hp-4300G kernel: printk: log_buf_len min size: 131072 bytes Jun 29 18:40:01 hp-4300G kernel: printk: log_buf_len: 262144 bytes Jun 29 18:40:01 hp-4300G kernel: printk: early log buf free: 114232(87%) Jun 29 18:40:01 hp-4300G kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: mem auto-init: stack:off, heap alloc:on, heap free:off Jun 29 18:40:01 hp-4300G kernel: Memory: 7409704K/7737932K available (14344K kernel code, 2035K rwdata, 4856K rodata, 1648K init, 4340K bss, 327968K reserved, 0K cma-reserved) Jun 29 18:40:01 hp-4300G kernel: random: get_random_u64 called from __kmem_cache_create+0x2a/0x560 with crng_init=0 Jun 29 18:40:01 hp-4300G kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 Jun 29 18:40:01 hp-4300G kernel: ftrace: allocating 41885 entries in 164 pages Jun 29 18:40:01 hp-4300G kernel: ftrace: allocated 164 pages with 3 groups Jun 29 18:40:01 hp-4300G kernel: rcu: Preemptible hierarchical RCU implementation. Jun 29 18:40:01 hp-4300G kernel: rcu: RCU dyntick-idle grace-period acceleration is enabled. Jun 29 18:40:01 hp-4300G kernel: rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32. Jun 29 18:40:01 hp-4300G kernel: rcu: RCU priority boosting: priority 1 delay 500 ms. Jun 29 18:40:01 hp-4300G kernel: Trampoline variant of Tasks RCU enabled. Jun 29 18:40:01 hp-4300G kernel: Rude variant of Tasks RCU enabled. Jun 29 18:40:01 hp-4300G kernel: Tracing variant of Tasks RCU enabled. Jun 29 18:40:01 hp-4300G kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. Jun 29 18:40:01 hp-4300G kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 Jun 29 18:40:01 hp-4300G kernel: NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16 Jun 29 18:40:01 hp-4300G kernel: Console: colour dummy device 80x25 Jun 29 18:40:01 hp-4300G kernel: printk: console [tty0] enabled Jun 29 18:40:01 hp-4300G kernel: ACPI: Core revision 20210105 Jun 29 18:40:01 hp-4300G kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns Jun 29 18:40:01 hp-4300G kernel: APIC: Switch to symmetric I/O mode setup Jun 29 18:40:01 hp-4300G kernel: Switched APIC routing to physical flat. Jun 29 18:40:01 hp-4300G kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Jun 29 18:40:01 hp-4300G kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d56c6114d4, max_idle_ns: 881591138569 ns Jun 29 18:40:01 hp-4300G kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 7588.44 BogoMIPS (lpj=12642313) Jun 29 18:40:01 hp-4300G kernel: pid_max: default: 32768 minimum: 301 Jun 29 18:40:01 hp-4300G kernel: LSM: Security Framework initializing Jun 29 18:40:01 hp-4300G kernel: Yama: becoming mindful. Jun 29 18:40:01 hp-4300G kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated Jun 29 18:40:01 hp-4300G kernel: LVT offset 1 assigned for vector 0xf9 Jun 29 18:40:01 hp-4300G kernel: LVT offset 2 assigned for vector 0xf4 Jun 29 18:40:01 hp-4300G kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 Jun 29 18:40:01 hp-4300G kernel: Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 Jun 29 18:40:01 hp-4300G kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Jun 29 18:40:01 hp-4300G kernel: Spectre V2 : Mitigation: Full AMD retpoline Jun 29 18:40:01 hp-4300G kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Jun 29 18:40:01 hp-4300G kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls Jun 29 18:40:01 hp-4300G kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier Jun 29 18:40:01 hp-4300G kernel: Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl Jun 29 18:40:01 hp-4300G kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp Jun 29 18:40:01 hp-4300G kernel: Freeing SMP alternatives memory: 36K Jun 29 18:40:01 hp-4300G kernel: smpboot: CPU0: AMD Ryzen 3 4300G with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1) Jun 29 18:40:01 hp-4300G kernel: Performance Events: Fam17h+ core perfctr, AMD PMU driver. Jun 29 18:40:01 hp-4300G kernel: ... version: 0 Jun 29 18:40:01 hp-4300G kernel: ... bit width: 48 Jun 29 18:40:01 hp-4300G kernel: ... generic registers: 6 Jun 29 18:40:01 hp-4300G kernel: ... value mask: 0000ffffffffffff Jun 29 18:40:01 hp-4300G kernel: ... max period: 00007fffffffffff Jun 29 18:40:01 hp-4300G kernel: ... fixed-purpose events: 0 Jun 29 18:40:01 hp-4300G kernel: ... event mask: 000000000000003f Jun 29 18:40:01 hp-4300G kernel: rcu: Hierarchical SRCU implementation. Jun 29 18:40:01 hp-4300G kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. Jun 29 18:40:01 hp-4300G kernel: smp: Bringing up secondary CPUs ... Jun 29 18:40:01 hp-4300G kernel: x86: Booting SMP configuration: Jun 29 18:40:01 hp-4300G kernel: .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 Jun 29 18:40:01 hp-4300G kernel: smp: Brought up 1 node, 8 CPUs Jun 29 18:40:01 hp-4300G kernel: smpboot: Max logical packages: 4 Jun 29 18:40:01 hp-4300G kernel: smpboot: Total of 8 processors activated (60707.56 BogoMIPS) Jun 29 18:40:01 hp-4300G kernel: devtmpfs: initialized Jun 29 18:40:01 hp-4300G kernel: x86/mm: Memory block size: 128MB Jun 29 18:40:01 hp-4300G kernel: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes) Jun 29 18:40:01 hp-4300G kernel: PM: Registering ACPI NVS region [mem 0xb8722000-0xb8a14fff] (3092480 bytes) Jun 29 18:40:01 hp-4300G kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns Jun 29 18:40:01 hp-4300G kernel: futex hash table entries: 8192 (order: 7, 524288 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: pinctrl core: initialized pinctrl subsystem Jun 29 18:40:01 hp-4300G kernel: PM: RTC time: 01:39:57, date: 2021-06-30 Jun 29 18:40:01 hp-4300G kernel: NET: Registered protocol family 16 Jun 29 18:40:01 hp-4300G kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations Jun 29 18:40:01 hp-4300G kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations Jun 29 18:40:01 hp-4300G kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations Jun 29 18:40:01 hp-4300G kernel: audit: initializing netlink subsys (disabled) Jun 29 18:40:01 hp-4300G kernel: audit: type=2000 audit(1625017197.143:1): state=initialized audit_enabled=0 res=1 Jun 29 18:40:01 hp-4300G kernel: thermal_sys: Registered thermal governor 'fair_share' Jun 29 18:40:01 hp-4300G kernel: thermal_sys: Registered thermal governor 'bang_bang' Jun 29 18:40:01 hp-4300G kernel: thermal_sys: Registered thermal governor 'step_wise' Jun 29 18:40:01 hp-4300G kernel: thermal_sys: Registered thermal governor 'user_space' Jun 29 18:40:01 hp-4300G kernel: thermal_sys: Registered thermal governor 'power_allocator' Jun 29 18:40:01 hp-4300G kernel: cpuidle: using governor ladder Jun 29 18:40:01 hp-4300G kernel: cpuidle: using governor menu Jun 29 18:40:01 hp-4300G kernel: ACPI: bus type PCI registered Jun 29 18:40:01 hp-4300G kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Jun 29 18:40:01 hp-4300G kernel: PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) Jun 29 18:40:01 hp-4300G kernel: PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 Jun 29 18:40:01 hp-4300G kernel: PCI: Using configuration type 1 for base access Jun 29 18:40:01 hp-4300G kernel: Kprobes globally optimized Jun 29 18:40:01 hp-4300G kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages Jun 29 18:40:01 hp-4300G kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages Jun 29 18:40:01 hp-4300G kernel: ACPI: Added _OSI(Module Device) Jun 29 18:40:01 hp-4300G kernel: ACPI: Added _OSI(Processor Device) Jun 29 18:40:01 hp-4300G kernel: ACPI: Added _OSI(3.0 _SCP Extensions) Jun 29 18:40:01 hp-4300G kernel: ACPI: Added _OSI(Processor Aggregator Device) Jun 29 18:40:01 hp-4300G kernel: ACPI: Added _OSI(Linux-Dell-Video) Jun 29 18:40:01 hp-4300G kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) Jun 29 18:40:01 hp-4300G kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) Jun 29 18:40:01 hp-4300G kernel: ACPI: 12 ACPI AML tables successfully acquired and loaded Jun 29 18:40:01 hp-4300G kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored Jun 29 18:40:01 hp-4300G kernel: ACPI: EC: EC started Jun 29 18:40:01 hp-4300G kernel: ACPI: EC: interrupt blocked Jun 29 18:40:01 hp-4300G kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 Jun 29 18:40:01 hp-4300G kernel: ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions Jun 29 18:40:01 hp-4300G kernel: ACPI: Interpreter enabled Jun 29 18:40:01 hp-4300G kernel: ACPI: (supports S0 S3 S4 S5) Jun 29 18:40:01 hp-4300G kernel: ACPI: Using IOAPIC for interrupt routing Jun 29 18:40:01 hp-4300G kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Jun 29 18:40:01 hp-4300G kernel: ACPI: Enabled 4 GPEs in block 00 to 1F Jun 29 18:40:01 hp-4300G kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Jun 29 18:40:01 hp-4300G kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] Jun 29 18:40:01 hp-4300G kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] Jun 29 18:40:01 hp-4300G kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] Jun 29 18:40:01 hp-4300G kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge Jun 29 18:40:01 hp-4300G kernel: PCI host bridge to bus 0000:00 Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: root bus resource [bus 00-ff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: PME# supported from D0 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.2: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.2: PME# supported from D0 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: PME# supported from D0 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.2: [1022:1635] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.2: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.2: PME# supported from D0 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.0: [1022:1448] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.1: [1022:1449] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.2: [1022:144a] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.3: [1022:144b] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.4: [1022:144c] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.5: [1022:144d] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.6: [1022:144e] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.7: [1022:144f] type 00 class 0x060000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.0: [1022:43d1] type 00 class 0x0c0330 Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit] Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.0: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601 Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref] Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.1: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.1: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: PCI bridge to [bus 01-0a] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: bridge window [io 0xd000-0xefff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:00.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:00.0: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:01.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:01.0: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:02.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:02.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:02.0: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:03.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:03.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:03.0: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:04.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:04.0: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:05.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:05.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:05.0: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: [1022:43c7] type 01 class 0x060400 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: PME# supported from D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: PCI bridge to [bus 02-0a] Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: bridge window [io 0xd000-0xefff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:00.0: PCI bridge to [bus 03] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:01.0: PCI bridge to [bus 04] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:02.0: PCI bridge to [bus 05] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:03.0: PCI bridge to [bus 06] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:04.0: PCI bridge to [bus 07] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:05.0: PCI bridge to [bus 08] Jun 29 18:40:01 hp-4300G kernel: pci 0000:09:00.0: [10ec:c821] type 00 class 0x028000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:09:00.0: reg 0x10: [io 0xe000-0xe0ff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:09:00.0: reg 0x18: [mem 0xfcc00000-0xfcc0ffff 64bit] Jun 29 18:40:01 hp-4300G kernel: pci 0000:09:00.0: supports D1 D2 Jun 29 18:40:01 hp-4300G kernel: pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: PCI bridge to [bus 09] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: bridge window [io 0xe000-0xefff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0a:00.0: reg 0x10: [io 0xd000-0xd0ff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0a:00.0: reg 0x18: [mem 0xfcb04000-0xfcb04fff 64bit] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0a:00.0: reg 0x20: [mem 0xfcb00000-0xfcb03fff 64bit] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0a:00.0: supports D1 D2 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: PCI bridge to [bus 0a] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0b:00.0: [1c5c:1339] type 00 class 0x010802 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0b:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0b:00.0: supports D1 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0b:00.0: PME# supported from D0 D1 D3hot Jun 29 18:40:01 hp-4300G kernel: pci 0000:0b:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:02.2 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.2: PCI bridge to [bus 0b] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: [1002:1636] type 00 class 0x030000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: reg 0x20: [io 0xf000-0xf0ff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: reg 0x24: [mem 0xfca00000-0xfca7ffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: BAR 0: assigned to efifb Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: PME# supported from D1 D2 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.1: [1002:1637] type 00 class 0x040300 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.1: reg 0x10: [mem 0xfca88000-0xfca8bfff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.1: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.1: PME# supported from D1 D2 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.2: [1022:15df] type 00 class 0x108000 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.2: reg 0x18: [mem 0xfc900000-0xfc9fffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.2: reg 0x24: [mem 0xfca8c000-0xfca8dfff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.2: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.3: [1022:1639] type 00 class 0x0c0330 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.3: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.4: [1022:1639] type 00 class 0x0c0330 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.4: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.4: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.6: [1022:15e3] type 00 class 0x040300 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.6: reg 0x10: [mem 0xfca80000-0xfca87fff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.6: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.6: PME# supported from D0 D3hot D3cold Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: PCI bridge to [bus 0c] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: bridge window [io 0xf000-0xffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0d:00.0: reg 0x24: [mem 0xfce01000-0xfce017ff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0d:00.0: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:0d:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) Jun 29 18:40:01 hp-4300G kernel: pci 0000:0d:00.1: [1022:7901] type 00 class 0x010601 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0d:00.1: reg 0x24: [mem 0xfce00000-0xfce007ff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0d:00.1: enabling Extended Tags Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.2: PCI bridge to [bus 0d] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] Jun 29 18:40:01 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:40:01 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:40:01 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:40:01 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:40:01 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:40:01 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:40:01 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:40:01 hp-4300G kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 Jun 29 18:40:01 hp-4300G kernel: ACPI: EC: interrupt unblocked Jun 29 18:40:01 hp-4300G kernel: ACPI: EC: event unblocked Jun 29 18:40:01 hp-4300G kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 Jun 29 18:40:01 hp-4300G kernel: ACPI: EC: GPE=0x3 Jun 29 18:40:01 hp-4300G kernel: ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete Jun 29 18:40:01 hp-4300G kernel: ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events Jun 29 18:40:01 hp-4300G kernel: iommu: Default domain type: Translated Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: vgaarb: bridge control possible Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: vgaarb: setting as boot device Jun 29 18:40:01 hp-4300G kernel: vgaarb: loaded Jun 29 18:40:01 hp-4300G kernel: SCSI subsystem initialized Jun 29 18:40:01 hp-4300G kernel: libata version 3.00 loaded. Jun 29 18:40:01 hp-4300G kernel: ACPI: bus type USB registered Jun 29 18:40:01 hp-4300G kernel: usbcore: registered new interface driver usbfs Jun 29 18:40:01 hp-4300G kernel: usbcore: registered new interface driver hub Jun 29 18:40:01 hp-4300G kernel: usbcore: registered new device driver usb Jun 29 18:40:01 hp-4300G kernel: pps_core: LinuxPPS API ver. 1 registered Jun 29 18:40:01 hp-4300G kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> Jun 29 18:40:01 hp-4300G kernel: PTP clock support registered Jun 29 18:40:01 hp-4300G kernel: EDAC MC: Ver: 3.0.0 Jun 29 18:40:01 hp-4300G kernel: Registered efivars operations Jun 29 18:40:01 hp-4300G kernel: NetLabel: Initializing Jun 29 18:40:01 hp-4300G kernel: NetLabel: domain hash size = 128 Jun 29 18:40:01 hp-4300G kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 29 18:40:01 hp-4300G kernel: NetLabel: unlabeled traffic allowed by default Jun 29 18:40:01 hp-4300G kernel: PCI: Using ACPI for IRQ routing Jun 29 18:40:01 hp-4300G kernel: PCI: pci_cache_line_size set to 64 bytes Jun 29 18:40:01 hp-4300G kernel: e820: reserve RAM buffer [mem 0x09c10000-0x0bffffff] Jun 29 18:40:01 hp-4300G kernel: e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] Jun 29 18:40:01 hp-4300G kernel: e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] Jun 29 18:40:01 hp-4300G kernel: e820: reserve RAM buffer [mem 0xb4c66018-0xb7ffffff] Jun 29 18:40:01 hp-4300G kernel: e820: reserve RAM buffer [mem 0xb5158000-0xb7ffffff] Jun 29 18:40:01 hp-4300G kernel: e820: reserve RAM buffer [mem 0xb6dde000-0xb7ffffff] Jun 29 18:40:01 hp-4300G kernel: e820: reserve RAM buffer [mem 0xb8390000-0xbbffffff] Jun 29 18:40:01 hp-4300G kernel: e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff] Jun 29 18:40:01 hp-4300G kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Jun 29 18:40:01 hp-4300G kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter Jun 29 18:40:01 hp-4300G kernel: clocksource: Switched to clocksource tsc-early Jun 29 18:40:01 hp-4300G kernel: VFS: Disk quotas dquot_6.6.0 Jun 29 18:40:01 hp-4300G kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Jun 29 18:40:01 hp-4300G kernel: pnp: PnP ACPI init Jun 29 18:40:01 hp-4300G kernel: system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) Jun 29 18:40:01 hp-4300G kernel: system 00:01: [mem 0x220000000-0x23fffffff window] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) Jun 29 18:40:01 hp-4300G kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a00-0x0a0f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a10-0x0a1f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a20-0x0a2f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a30-0x0a3f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a40-0x0a4f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a50-0x0a5f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a60-0x0a6f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a70-0x0a7f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a80-0x0a8f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0a90-0x0b8e] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0aa0-0x0aaf] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0ab0-0x0abf] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0ac0-0x0acf] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: [io 0x0ad0-0x0adf] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x04d0-0x04d1] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x040b] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x04d6] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0c00-0x0c01] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0c14] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0c50-0x0c51] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0c52] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0c6c] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0c6f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0cd0-0x0cd1] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0cd2-0x0cd3] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0cd4-0x0cd5] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0cd6-0x0cd7] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0cd8-0x0cdf] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0800-0x089f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0b00-0x0b0f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0b20-0x0b3f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0900-0x090f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [io 0x0910-0x091f] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: [mem 0xff000000-0xffffffff] has been reserved Jun 29 18:40:01 hp-4300G kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) Jun 29 18:40:01 hp-4300G kernel: pnp: PnP ACPI: found 5 devices Jun 29 18:40:01 hp-4300G kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns Jun 29 18:40:01 hp-4300G kernel: NET: Registered protocol family 2 Jun 29 18:40:01 hp-4300G kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: TCP: Hash tables configured (established 65536 bind 65536) Jun 29 18:40:01 hp-4300G kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) Jun 29 18:40:01 hp-4300G kernel: NET: Registered protocol family 1 Jun 29 18:40:01 hp-4300G kernel: NET: Registered protocol family 44 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:00.0: PCI bridge to [bus 03] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:01.0: PCI bridge to [bus 04] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:02.0: PCI bridge to [bus 05] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:03.0: PCI bridge to [bus 06] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:04.0: PCI bridge to [bus 07] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:05.0: PCI bridge to [bus 08] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: PCI bridge to [bus 09] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: bridge window [io 0xe000-0xefff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: PCI bridge to [bus 0a] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: PCI bridge to [bus 02-0a] Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: bridge window [io 0xd000-0xefff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: PCI bridge to [bus 01-0a] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: bridge window [io 0xd000-0xefff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.2: PCI bridge to [bus 0b] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: PCI bridge to [bus 0c] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: bridge window [io 0xf000-0xffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.2: PCI bridge to [bus 0d] Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xefff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:01: resource 1 [mem 0xfcb00000-0xfcdfffff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:02: resource 0 [io 0xd000-0xefff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfccfffff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:09: resource 0 [io 0xe000-0xefff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:09: resource 1 [mem 0xfcc00000-0xfccfffff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:0a: resource 1 [mem 0xfcb00000-0xfcbfffff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:0b: resource 1 [mem 0xfcf00000-0xfcffffff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:0c: resource 0 [io 0xf000-0xffff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:0c: resource 1 [mem 0xfc700000-0xfcafffff] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] Jun 29 18:40:01 hp-4300G kernel: pci_bus 0000:0d: resource 1 [mem 0xfce00000-0xfcefffff] Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.1: D0 power state depends on 0000:0c:00.0 Jun 29 18:40:01 hp-4300G kernel: PCI: CLS 64 bytes, default 64 Jun 29 18:40:01 hp-4300G kernel: Trying to unpack rootfs image as initramfs... Jun 29 18:40:01 hp-4300G kernel: Freeing initrd memory: 7796K Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter. Jun 29 18:40:01 hp-4300G kernel: fbcon: Taking over console Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:00.2: can't derive routing for PCI INT A Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:00.2: PCI INT A: not connected Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:01.0: Adding to iommu group 0 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.0: Adding to iommu group 1 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.1: Adding to iommu group 2 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:02.2: Adding to iommu group 3 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.0: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.1: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:08.2: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:14.0: Adding to iommu group 5 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:14.3: Adding to iommu group 5 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.0: Adding to iommu group 6 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.1: Adding to iommu group 6 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.2: Adding to iommu group 6 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.3: Adding to iommu group 6 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.4: Adding to iommu group 6 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.5: Adding to iommu group 6 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.6: Adding to iommu group 6 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:18.7: Adding to iommu group 6 Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.1: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:01:00.2: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:00.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:01.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:02.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:03.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:04.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:05.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:06.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:02:07.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:09:00.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0a:00.0: Adding to iommu group 7 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0b:00.0: Adding to iommu group 8 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.0: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.1: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.2: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.3: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.4: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0c:00.6: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0d:00.0: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:0d:00.1: Adding to iommu group 4 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 Jun 29 18:40:01 hp-4300G kernel: pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade): Jun 29 18:40:01 hp-4300G kernel: PPR X2APIC NX GT IA GA PC GA_vAPIC Jun 29 18:40:01 hp-4300G kernel: AMD-Vi: Interrupt remapping enabled Jun 29 18:40:01 hp-4300G kernel: AMD-Vi: Virtual APIC enabled Jun 29 18:40:01 hp-4300G kernel: AMD-Vi: X2APIC enabled Jun 29 18:40:01 hp-4300G kernel: AMD-Vi: Lazy IO/TLB flushing enabled Jun 29 18:40:01 hp-4300G kernel: amd_uncore: 4 amd_df counters detected Jun 29 18:40:01 hp-4300G kernel: amd_uncore: 6 amd_l3 counters detected Jun 29 18:40:01 hp-4300G kernel: LVT offset 0 assigned for vector 0x400 Jun 29 18:40:01 hp-4300G kernel: perf: AMD IBS detected (0x000003ff) Jun 29 18:40:01 hp-4300G kernel: check: Scanning for low memory corruption every 60 seconds Jun 29 18:40:01 hp-4300G kernel: Initialise system trusted keyrings Jun 29 18:40:01 hp-4300G kernel: Key type blacklist registered Jun 29 18:40:01 hp-4300G kernel: workingset: timestamp_bits=41 max_order=21 bucket_order=0 Jun 29 18:40:01 hp-4300G kernel: zbud: loaded Jun 29 18:40:01 hp-4300G kernel: Key type asymmetric registered Jun 29 18:40:01 hp-4300G kernel: Asymmetric key parser 'x509' registered Jun 29 18:40:01 hp-4300G kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) Jun 29 18:40:01 hp-4300G kernel: io scheduler mq-deadline registered Jun 29 18:40:01 hp-4300G kernel: io scheduler kyber registered Jun 29 18:40:01 hp-4300G kernel: io scheduler bfq registered Jun 29 18:40:01 hp-4300G kernel: pcieport 0000:00:02.1: PME: Signaling with IRQ 26 Jun 29 18:40:01 hp-4300G kernel: pcieport 0000:00:02.2: PME: Signaling with IRQ 27 Jun 29 18:40:01 hp-4300G kernel: pcieport 0000:00:08.1: PME: Signaling with IRQ 28 Jun 29 18:40:01 hp-4300G kernel: pcieport 0000:00:08.2: PME: Signaling with IRQ 29 Jun 29 18:40:01 hp-4300G kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Jun 29 18:40:01 hp-4300G kernel: efifb: probing for efifb Jun 29 18:40:01 hp-4300G kernel: efifb: framebuffer at 0xd0000000, using 3072k, total 3072k Jun 29 18:40:01 hp-4300G kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1 Jun 29 18:40:01 hp-4300G kernel: efifb: scrolling: redraw Jun 29 18:40:01 hp-4300G kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Jun 29 18:40:01 hp-4300G kernel: Console: switching to colour frame buffer device 128x48 Jun 29 18:40:01 hp-4300G kernel: fb0: EFI VGA frame buffer device Jun 29 18:40:01 hp-4300G kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 Jun 29 18:40:01 hp-4300G kernel: ACPI: button: Power Button [PWRB] Jun 29 18:40:01 hp-4300G kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 Jun 29 18:40:01 hp-4300G kernel: ACPI: button: Power Button [PWRF] Jun 29 18:40:01 hp-4300G kernel: Monitor-Mwait will be used to enter C-1 state Jun 29 18:40:01 hp-4300G kernel: ACPI: \_PR_.C000: Found 3 idle states Jun 29 18:40:01 hp-4300G kernel: ACPI: \_PR_.C002: Found 3 idle states Jun 29 18:40:01 hp-4300G kernel: ACPI: \_PR_.C004: Found 3 idle states Jun 29 18:40:01 hp-4300G kernel: ACPI: \_PR_.C006: Found 3 idle states Jun 29 18:40:01 hp-4300G kernel: ACPI: \_PR_.C001: Found 3 idle states Jun 29 18:40:01 hp-4300G kernel: ACPI: \_PR_.C003: Found 3 idle states Jun 29 18:40:01 hp-4300G kernel: ACPI: \_PR_.C005: Found 3 idle states Jun 29 18:40:01 hp-4300G kernel: ACPI: \_PR_.C007: Found 3 idle states Jun 29 18:40:01 hp-4300G kernel: thermal LNXTHERM:00: registered as thermal_zone0 Jun 29 18:40:01 hp-4300G kernel: ACPI: thermal: Thermal Zone [HPTZ] (30 C) Jun 29 18:40:01 hp-4300G kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Jun 29 18:40:01 hp-4300G kernel: Non-volatile memory driver v1.3 Jun 29 18:40:01 hp-4300G kernel: AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]> Jun 29 18:40:01 hp-4300G kernel: nvme nvme0: pci function 0000:0b:00.0 Jun 29 18:40:01 hp-4300G kernel: ahci 0000:01:00.1: version 3.0 Jun 29 18:40:01 hp-4300G kernel: ahci 0000:01:00.1: enabling device (0100 -> 0102) Jun 29 18:40:01 hp-4300G kernel: ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled Jun 29 18:40:01 hp-4300G kernel: ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode Jun 29 18:40:01 hp-4300G kernel: ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst Jun 29 18:40:01 hp-4300G kernel: scsi host0: ahci Jun 29 18:40:01 hp-4300G kernel: scsi host1: ahci Jun 29 18:40:01 hp-4300G kernel: scsi host2: ahci Jun 29 18:40:01 hp-4300G kernel: scsi host3: ahci Jun 29 18:40:01 hp-4300G kernel: scsi host4: ahci Jun 29 18:40:01 hp-4300G kernel: scsi host5: ahci Jun 29 18:40:01 hp-4300G kernel: scsi host6: ahci Jun 29 18:40:01 hp-4300G kernel: scsi host7: ahci Jun 29 18:40:01 hp-4300G kernel: ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 44 Jun 29 18:40:01 hp-4300G kernel: ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 44 Jun 29 18:40:01 hp-4300G kernel: ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 44 Jun 29 18:40:01 hp-4300G kernel: ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 44 Jun 29 18:40:01 hp-4300G kernel: ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 44 Jun 29 18:40:01 hp-4300G kernel: ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 44 Jun 29 18:40:01 hp-4300G kernel: ata7: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80400 irq 44 Jun 29 18:40:01 hp-4300G kernel: ata8: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80480 irq 44 Jun 29 18:40:01 hp-4300G kernel: ahci 0000:0d:00.0: enabling device (0100 -> 0102) Jun 29 18:40:01 hp-4300G kernel: ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 29 18:40:01 hp-4300G kernel: ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part Jun 29 18:40:01 hp-4300G kernel: scsi host8: ahci Jun 29 18:40:01 hp-4300G kernel: ata9: SATA max UDMA/133 abar m2048@0xfce01000 port 0xfce01100 irq 46 Jun 29 18:40:01 hp-4300G kernel: ahci 0000:0d:00.1: enabling device (0100 -> 0102) Jun 29 18:40:01 hp-4300G kernel: ahci 0000:0d:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 29 18:40:01 hp-4300G kernel: ahci 0000:0d:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part Jun 29 18:40:01 hp-4300G kernel: scsi host9: ahci Jun 29 18:40:01 hp-4300G kernel: ata10: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 48 Jun 29 18:40:01 hp-4300G kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jun 29 18:40:01 hp-4300G kernel: ehci-pci: EHCI PCI platform driver Jun 29 18:40:01 hp-4300G kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Jun 29 18:40:01 hp-4300G kernel: ohci-pci: OHCI PCI platform driver Jun 29 18:40:01 hp-4300G kernel: uhci_hcd: USB Universal Host Controller Interface driver Jun 29 18:40:01 hp-4300G kernel: usbcore: registered new interface driver usbserial_generic Jun 29 18:40:01 hp-4300G kernel: usbserial: USB Serial support registered for generic Jun 29 18:40:01 hp-4300G kernel: rtc_cmos 00:02: RTC can wake from S4 Jun 29 18:40:01 hp-4300G kernel: rtc_cmos 00:02: registered as rtc0 Jun 29 18:40:01 hp-4300G kernel: rtc_cmos 00:02: setting system clock to 2021-06-30T01:39:58 UTC (1625017198) Jun 29 18:40:01 hp-4300G kernel: rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Jun 29 18:40:01 hp-4300G kernel: ledtrig-cpu: registered to indicate activity on CPUs Jun 29 18:40:01 hp-4300G kernel: hid: raw HID events driver (C) Jiri Kosina Jun 29 18:40:01 hp-4300G kernel: drop_monitor: Initializing network drop monitor service Jun 29 18:40:01 hp-4300G kernel: Initializing XFRM netlink socket Jun 29 18:40:01 hp-4300G kernel: NET: Registered protocol family 10 Jun 29 18:40:01 hp-4300G kernel: nvme nvme0: missing or invalid SUBNQN field. Jun 29 18:40:01 hp-4300G kernel: Segment Routing with IPv6 Jun 29 18:40:01 hp-4300G kernel: RPL Segment Routing with IPv6 Jun 29 18:40:01 hp-4300G kernel: NET: Registered protocol family 17 Jun 29 18:40:01 hp-4300G kernel: microcode: CPU0: patch_level=0x08600106 Jun 29 18:40:01 hp-4300G kernel: microcode: CPU1: patch_level=0x08600106 Jun 29 18:40:01 hp-4300G kernel: microcode: CPU2: patch_level=0x08600106 Jun 29 18:40:01 hp-4300G kernel: microcode: CPU3: patch_level=0x08600106 Jun 29 18:40:01 hp-4300G kernel: microcode: CPU4: patch_level=0x08600106 Jun 29 18:40:01 hp-4300G kernel: microcode: CPU5: patch_level=0x08600106 Jun 29 18:40:01 hp-4300G kernel: microcode: CPU6: patch_level=0x08600106 Jun 29 18:40:01 hp-4300G kernel: microcode: CPU7: patch_level=0x08600106 Jun 29 18:40:01 hp-4300G kernel: microcode: Microcode Update Driver: v2.2. Jun 29 18:40:01 hp-4300G kernel: resctrl: L3 allocation detected Jun 29 18:40:01 hp-4300G kernel: resctrl: L3DATA allocation detected Jun 29 18:40:01 hp-4300G kernel: resctrl: L3CODE allocation detected Jun 29 18:40:01 hp-4300G kernel: resctrl: MB allocation detected Jun 29 18:40:01 hp-4300G kernel: resctrl: L3 monitoring detected Jun 29 18:40:01 hp-4300G kernel: IPI shorthand broadcast: enabled Jun 29 18:40:01 hp-4300G kernel: sched_clock: Marking stable (481827256, 421468)->(484410312, -2161588) Jun 29 18:40:01 hp-4300G kernel: registered taskstats version 1 Jun 29 18:40:01 hp-4300G kernel: Loading compiled-in X.509 certificates Jun 29 18:40:01 hp-4300G kernel: nvme nvme0: 16/0/0 default/read/poll queues Jun 29 18:40:01 hp-4300G kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 22ba77e5a745fb64a1c258554eb6d5c653018035' Jun 29 18:40:01 hp-4300G kernel: zswap: loaded using pool lz4/z3fold Jun 29 18:40:01 hp-4300G kernel: Key type ._fscrypt registered Jun 29 18:40:01 hp-4300G kernel: Key type .fscrypt registered Jun 29 18:40:01 hp-4300G kernel: Key type fscrypt-provisioning registered Jun 29 18:40:01 hp-4300G kernel: PM: Magic number: 9:490:661 Jun 29 18:40:01 hp-4300G kernel: RAS: Correctable Errors collector initialized. Jun 29 18:40:01 hp-4300G kernel: nvme0n1: p1 p2 Jun 29 18:40:01 hp-4300G kernel: ata1: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: ata9: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: ata10: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: ata2: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d56c6114d4, max_idle_ns: 881591138569 ns Jun 29 18:40:01 hp-4300G kernel: clocksource: Switched to clocksource tsc Jun 29 18:40:01 hp-4300G kernel: ata3: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: ata4: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: ata5: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: ata6: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: ata7: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: ata8: SATA link down (SStatus 0 SControl 300) Jun 29 18:40:01 hp-4300G kernel: Freeing unused decrypted memory: 2036K Jun 29 18:40:01 hp-4300G kernel: Freeing unused kernel image (initmem) memory: 1648K Jun 29 18:40:01 hp-4300G kernel: Write protecting the kernel read-only data: 22528k Jun 29 18:40:01 hp-4300G kernel: Freeing unused kernel image (text/rodata gap) memory: 2036K Jun 29 18:40:01 hp-4300G kernel: Freeing unused kernel image (rodata/data gap) memory: 1288K Jun 29 18:40:01 hp-4300G kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found. Jun 29 18:40:01 hp-4300G kernel: rodata_test: all tests were successful Jun 29 18:40:01 hp-4300G kernel: Run /init as init process Jun 29 18:40:01 hp-4300G kernel: with arguments: Jun 29 18:40:01 hp-4300G kernel: /init Jun 29 18:40:01 hp-4300G kernel: with environment: Jun 29 18:40:01 hp-4300G kernel: HOME=/ Jun 29 18:40:01 hp-4300G kernel: TERM=linux Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 Jun 29 18:40:01 hp-4300G kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 Jun 29 18:40:01 hp-4300G kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:40:01 hp-4300G kernel: usb usb1: Product: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: usb usb1: Manufacturer: Linux 5.12.0-rc3-00024-gf127c9556a8e xhci-hcd Jun 29 18:40:01 hp-4300G kernel: usb usb1: SerialNumber: 0000:01:00.0 Jun 29 18:40:01 hp-4300G kernel: hub 1-0:1.0: USB hub found Jun 29 18:40:01 hp-4300G kernel: hub 1-0:1.0: 14 ports detected Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed Jun 29 18:40:01 hp-4300G kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 18:40:01 hp-4300G kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 Jun 29 18:40:01 hp-4300G kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:40:01 hp-4300G kernel: usb usb2: Product: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: usb usb2: Manufacturer: Linux 5.12.0-rc3-00024-gf127c9556a8e xhci-hcd Jun 29 18:40:01 hp-4300G kernel: usb usb2: SerialNumber: 0000:01:00.0 Jun 29 18:40:01 hp-4300G kernel: hub 2-0:1.0: USB hub found Jun 29 18:40:01 hp-4300G kernel: hub 2-0:1.0: 8 ports detected Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.3: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 Jun 29 18:40:01 hp-4300G kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 Jun 29 18:40:01 hp-4300G kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:40:01 hp-4300G kernel: usb usb3: Product: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: usb usb3: Manufacturer: Linux 5.12.0-rc3-00024-gf127c9556a8e xhci-hcd Jun 29 18:40:01 hp-4300G kernel: usb usb3: SerialNumber: 0000:0c:00.3 Jun 29 18:40:01 hp-4300G kernel: hub 3-0:1.0: USB hub found Jun 29 18:40:01 hp-4300G kernel: hub 3-0:1.0: 4 ports detected Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.3: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed Jun 29 18:40:01 hp-4300G kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 18:40:01 hp-4300G kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 Jun 29 18:40:01 hp-4300G kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:40:01 hp-4300G kernel: usb usb4: Product: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: usb usb4: Manufacturer: Linux 5.12.0-rc3-00024-gf127c9556a8e xhci-hcd Jun 29 18:40:01 hp-4300G kernel: usb usb4: SerialNumber: 0000:0c:00.3 Jun 29 18:40:01 hp-4300G kernel: hub 4-0:1.0: USB hub found Jun 29 18:40:01 hp-4300G kernel: hub 4-0:1.0: 2 ports detected Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.4: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 5 Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 Jun 29 18:40:01 hp-4300G kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 Jun 29 18:40:01 hp-4300G kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:40:01 hp-4300G kernel: usb usb5: Product: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: usb usb5: Manufacturer: Linux 5.12.0-rc3-00024-gf127c9556a8e xhci-hcd Jun 29 18:40:01 hp-4300G kernel: usb usb5: SerialNumber: 0000:0c:00.4 Jun 29 18:40:01 hp-4300G kernel: hub 5-0:1.0: USB hub found Jun 29 18:40:01 hp-4300G kernel: hub 5-0:1.0: 4 ports detected Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.4: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 6 Jun 29 18:40:01 hp-4300G kernel: xhci_hcd 0000:0c:00.4: Host supports USB 3.1 Enhanced SuperSpeed Jun 29 18:40:01 hp-4300G kernel: usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 18:40:01 hp-4300G kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 Jun 29 18:40:01 hp-4300G kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 18:40:01 hp-4300G kernel: usb usb6: Product: xHCI Host Controller Jun 29 18:40:01 hp-4300G kernel: usb usb6: Manufacturer: Linux 5.12.0-rc3-00024-gf127c9556a8e xhci-hcd Jun 29 18:40:01 hp-4300G kernel: usb usb6: SerialNumber: 0000:0c:00.4 Jun 29 18:40:01 hp-4300G kernel: hub 6-0:1.0: USB hub found Jun 29 18:40:01 hp-4300G kernel: hub 6-0:1.0: 2 ports detected Jun 29 18:40:01 hp-4300G kernel: SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled Jun 29 18:40:01 hp-4300G kernel: XFS (nvme0n1p2): Mounting V5 Filesystem Jun 29 18:40:01 hp-4300G kernel: XFS (nvme0n1p2): Ending clean mount Jun 29 18:40:01 hp-4300G kernel: xfs filesystem being mounted at /new_root supports timestamps until 2038 (0x7fffffff) Jun 29 18:40:01 hp-4300G kernel: random: fast init done Jun 29 18:40:01 hp-4300G kernel: random: crng init done Jun 29 18:40:01 hp-4300G systemd[1]: Successfully credited entropy passed from boot loader. Jun 29 18:40:01 hp-4300G systemd[1]: systemd 248.3-2-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) Jun 29 18:40:01 hp-4300G systemd[1]: Detected architecture x86-64. Jun 29 18:40:01 hp-4300G systemd[1]: Hostname set to <hp-4300G>. Jun 29 18:40:01 hp-4300G systemd-fstab-generator[250]: Mount point is not a valid path, ignoring. Jun 29 18:40:01 hp-4300G systemd-fstab-generator[250]: Mount point is not a valid path, ignoring. Jun 29 18:40:01 hp-4300G systemd[1]: Queued start job for default target Graphical Interface. Jun 29 18:40:01 hp-4300G systemd[1]: Created slice system-getty.slice. Jun 29 18:40:01 hp-4300G systemd[1]: Created slice system-modprobe.slice. Jun 29 18:40:01 hp-4300G systemd[1]: Created slice User and Session Slice. Jun 29 18:40:01 hp-4300G systemd[1]: Started Dispatch Password Requests to Console Directory Watch. Jun 29 18:40:01 hp-4300G systemd[1]: Started Forward Password Requests to Wall Directory Watch. Jun 29 18:40:01 hp-4300G systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. Jun 29 18:40:01 hp-4300G systemd[1]: Reached target Local Encrypted Volumes. Jun 29 18:40:01 hp-4300G systemd[1]: Reached target Login Prompts. Jun 29 18:40:01 hp-4300G systemd[1]: Reached target Paths. Jun 29 18:40:01 hp-4300G systemd[1]: Reached target Remote File Systems. Jun 29 18:40:01 hp-4300G systemd[1]: Reached target Slices. Jun 29 18:40:01 hp-4300G systemd[1]: Reached target Swap. Jun 29 18:40:01 hp-4300G systemd[1]: Reached target Local Verity Integrity Protected Volumes. Jun 29 18:40:01 hp-4300G systemd[1]: Listening on Device-mapper event daemon FIFOs. Jun 29 18:40:01 hp-4300G systemd[1]: Listening on Process Core Dump Socket. Jun 29 18:40:01 hp-4300G systemd[1]: Listening on Journal Audit Socket. Jun 29 18:40:01 hp-4300G systemd[1]: Listening on Journal Socket (/dev/log). Jun 29 18:40:01 hp-4300G systemd[1]: Listening on Journal Socket. Jun 29 18:40:01 hp-4300G systemd[1]: Listening on Network Service Netlink Socket. Jun 29 18:40:01 hp-4300G systemd[1]: Listening on udev Control Socket. Jun 29 18:40:01 hp-4300G systemd[1]: Listening on udev Kernel Socket. Jun 29 18:40:01 hp-4300G systemd[1]: Mounting Huge Pages File System... Jun 29 18:40:01 hp-4300G systemd[1]: Mounting POSIX Message Queue File System... Jun 29 18:40:01 hp-4300G systemd[1]: Mounting Kernel Debug File System... Jun 29 18:40:01 hp-4300G systemd[1]: Mounting Kernel Trace File System... Jun 29 18:40:01 hp-4300G systemd[1]: Starting Create list of static device nodes for the current kernel... Jun 29 18:40:01 hp-4300G systemd[1]: Starting Load Kernel Module configfs... Jun 29 18:40:01 hp-4300G systemd[1]: Starting Load Kernel Module drm... Jun 29 18:40:01 hp-4300G systemd[1]: Starting Load Kernel Module fuse... Jun 29 18:40:01 hp-4300G systemd[1]: Starting Set Up Additional Binary Formats... Jun 29 18:40:01 hp-4300G systemd[1]: Condition check resulted in File System Check on Root Device being skipped. Jun 29 18:40:01 hp-4300G kernel: Linux agpgart interface v0.103 Jun 29 18:40:01 hp-4300G systemd[1]: Starting Journal Service... Jun 29 18:40:01 hp-4300G systemd[1]: Starting Load Kernel Modules... Jun 29 18:40:01 hp-4300G systemd[1]: Starting Remount Root and Kernel File Systems... Jun 29 18:40:01 hp-4300G systemd[1]: Condition check resulted in Repartition Root Disk being skipped. Jun 29 18:40:01 hp-4300G kernel: fuse: init (API version 7.33) Jun 29 18:40:01 hp-4300G systemd[1]: Starting Coldplug All udev Devices... Jun 29 18:40:01 hp-4300G systemd[1]: Mounted Huge Pages File System. Jun 29 18:40:01 hp-4300G systemd[1]: Mounted POSIX Message Queue File System. Jun 29 18:40:01 hp-4300G kernel: XFS: attr2 mount option is deprecated. Jun 29 18:40:01 hp-4300G systemd[1]: Mounted Kernel Debug File System. Jun 29 18:40:01 hp-4300G systemd[1]: Mounted Kernel Trace File System. Jun 29 18:40:01 hp-4300G kernel: Asymmetric key parser 'pkcs8' registered Jun 29 18:40:01 hp-4300G systemd[1]: Finished Create list of static device nodes for the current kernel. Jun 29 18:40:01 hp-4300G systemd[1]: [email protected]: Deactivated successfully. Jun 29 18:40:01 hp-4300G systemd[1]: Finished Load Kernel Module configfs. Jun 29 18:40:01 hp-4300G systemd[1]: [email protected]: Deactivated successfully. Jun 29 18:40:01 hp-4300G systemd[1]: Finished Load Kernel Module drm. Jun 29 18:40:01 hp-4300G systemd[1]: [email protected]: Deactivated successfully. Jun 29 18:40:01 hp-4300G systemd[1]: Finished Load Kernel Module fuse. Jun 29 18:40:01 hp-4300G systemd[1]: Finished Load Kernel Modules. Jun 29 18:40:01 hp-4300G systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 265 (systemd-binfmt) Jun 29 18:40:01 hp-4300G systemd[1]: Mounting Arbitrary Executable File Formats File System... Jun 29 18:40:01 hp-4300G kernel: xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) Jun 29 18:40:01 hp-4300G systemd[1]: Mounting FUSE Control File System... Jun 29 18:40:01 hp-4300G systemd[1]: Mounting Kernel Configuration File System... Jun 29 18:40:01 hp-4300G systemd[1]: Starting Apply Kernel Variables... Jun 29 18:40:01 hp-4300G systemd[1]: Finished Remount Root and Kernel File Systems. Jun 29 18:40:01 hp-4300G kernel: audit: type=1130 audit(1625017201.694:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:01 hp-4300G systemd[1]: Mounted Arbitrary Executable File Formats File System. Jun 29 18:40:01 hp-4300G systemd[1]: Mounted FUSE Control File System. Jun 29 18:40:01 hp-4300G systemd[1]: Mounted Kernel Configuration File System. Jun 29 18:40:01 hp-4300G systemd[1]: Condition check resulted in First Boot Wizard being skipped. Jun 29 18:40:01 hp-4300G systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Jun 29 18:40:01 hp-4300G systemd[1]: Starting Load/Save Random Seed... Jun 29 18:40:01 hp-4300G systemd[1]: Starting Create System Users... Jun 29 18:40:01 hp-4300G systemd[1]: Finished Set Up Additional Binary Formats. Jun 29 18:40:01 hp-4300G kernel: audit: type=1130 audit(1625017201.700:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:01 hp-4300G systemd[1]: Finished Apply Kernel Variables. Jun 29 18:40:01 hp-4300G kernel: usb 1-11: new full-speed USB device number 2 using xhci_hcd Jun 29 18:40:01 hp-4300G kernel: audit: type=1130 audit(1625017201.700:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:01 hp-4300G systemd[1]: Finished Load/Save Random Seed. Jun 29 18:40:01 hp-4300G kernel: audit: type=1130 audit(1625017201.710:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:01 hp-4300G systemd[1]: Condition check resulted in First Boot Complete being skipped. Jun 29 18:40:01 hp-4300G systemd[1]: Started Journal Service. Jun 29 18:40:01 hp-4300G kernel: audit: type=1130 audit(1625017201.720:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:01 hp-4300G kernel: audit: type=1130 audit(1625017201.724:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:01 hp-4300G kernel: audit: type=1130 audit(1625017201.734:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:01 hp-4300G kernel: audit: type=1130 audit(1625017201.740:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:01 hp-4300G kernel: audit: type=1334 audit(1625017201.744:10): prog-id=7 op=LOAD Jun 29 18:40:01 hp-4300G kernel: acpi-tad ACPI000E:00: Missing _PRW Jun 29 18:40:01 hp-4300G kernel: acpi_cpufreq: overriding BIOS provided _PSD data Jun 29 18:40:01 hp-4300G kernel: ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) Jun 29 18:40:01 hp-4300G kernel: acpi device:1e: registered as cooling_device8 Jun 29 18:40:01 hp-4300G kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input2 Jun 29 18:40:01 hp-4300G kernel: acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) Jun 29 18:40:01 hp-4300G kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3 Jun 29 18:40:01 hp-4300G kernel: RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer Jun 29 18:40:01 hp-4300G kernel: RAPL PMU: hw unit of domain package 2^-16 Joules Jun 29 18:40:01 hp-4300G kernel: ccp 0000:0c:00.2: enabling device (0100 -> 0102) Jun 29 18:40:01 hp-4300G kernel: ccp 0000:0c:00.2: ccp: unable to access the device: you might be running a broken BIOS. Jun 29 18:40:01 hp-4300G kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 Jun 29 18:40:01 hp-4300G kernel: piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection Jun 29 18:40:01 hp-4300G kernel: cryptd: max_cpu_qlen set to 1000 Jun 29 18:40:01 hp-4300G kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 Jun 29 18:40:01 hp-4300G kernel: FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Jun 29 18:40:01 hp-4300G kernel: ccp 0000:0c:00.2: tee enabled Jun 29 18:40:01 hp-4300G kernel: ccp 0000:0c:00.2: psp enabled Jun 29 18:40:01 hp-4300G kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver Jun 29 18:40:01 hp-4300G kernel: sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address Jun 29 18:40:01 hp-4300G kernel: sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) Jun 29 18:40:01 hp-4300G kernel: AVX2 version of gcm_enc/dec engaged. Jun 29 18:40:01 hp-4300G kernel: AES CTR mode by8 optimization enabled Jun 29 18:40:01 hp-4300G kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database Jun 29 18:40:01 hp-4300G kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Jun 29 18:40:01 hp-4300G kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Jun 29 18:40:01 hp-4300G kernel: cfg80211: failed to load regulatory.db Jun 29 18:40:02 hp-4300G kernel: input: HP WMI hotkeys as /devices/virtual/input/input4 Jun 29 18:40:02 hp-4300G kernel: snd_hda_intel 0000:0c:00.1: enabling device (0100 -> 0102) Jun 29 18:40:02 hp-4300G kernel: snd_hda_intel 0000:0c:00.1: Handle vga_switcheroo audio client Jun 29 18:40:02 hp-4300G kernel: snd_hda_intel 0000:0c:00.6: enabling device (0100 -> 0102) Jun 29 18:40:02 hp-4300G kernel: libphy: r8169: probed Jun 29 18:40:02 hp-4300G kernel: r8169 0000:0a:00.0 eth0: RTL8168h/8111h, 00:68:eb:ad:98:43, XID 541, IRQ 91 Jun 29 18:40:02 hp-4300G kernel: r8169 0000:0a:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] Jun 29 18:40:02 hp-4300G kernel: r8169 0000:0a:00.0 enp10s0: renamed from eth0 Jun 29 18:40:02 hp-4300G kernel: usb 1-11: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 Jun 29 18:40:02 hp-4300G kernel: usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 29 18:40:02 hp-4300G kernel: usb 1-11: Product: USB Receiver Jun 29 18:40:02 hp-4300G kernel: usb 1-11: Manufacturer: Logitech Jun 29 18:40:02 hp-4300G kernel: Generic FE-GE Realtek PHY r8169-a00:00: attached PHY driver (mii_bus:phy_addr=r8169-a00:00, irq=MAC) Jun 29 18:40:02 hp-4300G kernel: input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input5 Jun 29 18:40:02 hp-4300G kernel: kvm: Nested Virtualization enabled Jun 29 18:40:02 hp-4300G kernel: SVM: kvm: Nested Paging enabled Jun 29 18:40:02 hp-4300G kernel: SVM: Virtual VMLOAD VMSAVE supported Jun 29 18:40:02 hp-4300G kernel: SVM: Virtual GIF supported Jun 29 18:40:02 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC671: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line Jun 29 18:40:02 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) Jun 29 18:40:02 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) Jun 29 18:40:02 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 Jun 29 18:40:02 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: inputs: Jun 29 18:40:02 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 Jun 29 18:40:02 hp-4300G kernel: snd_hda_codec_realtek hdaudioC1D0: Line=0x1b Jun 29 18:40:02 hp-4300G kernel: usb 1-12: new full-speed USB device number 3 using xhci_hcd Jun 29 18:40:02 hp-4300G kernel: input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input6 Jun 29 18:40:02 hp-4300G kernel: input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input7 Jun 29 18:40:02 hp-4300G kernel: input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input8 Jun 29 18:40:02 hp-4300G kernel: input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input9 Jun 29 18:40:02 hp-4300G kernel: MCE: In-kernel MCE decoding enabled. Jun 29 18:40:02 hp-4300G kernel: r8169 0000:0a:00.0 enp10s0: Link is Down Jun 29 18:40:02 hp-4300G kernel: intel_rapl_common: Found RAPL domain package Jun 29 18:40:02 hp-4300G kernel: intel_rapl_common: Found RAPL domain core Jun 29 18:40:02 hp-4300G kernel: usb 1-12: New USB device found, idVendor=0bda, idProduct=b00a, bcdDevice= 1.10 Jun 29 18:40:02 hp-4300G kernel: usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 29 18:40:02 hp-4300G kernel: usb 1-12: Product: Bluetooth Radio Jun 29 18:40:02 hp-4300G kernel: usb 1-12: Manufacturer: Realtek Jun 29 18:40:02 hp-4300G kernel: usb 1-12: SerialNumber: 00e04c000001 Jun 29 18:40:02 hp-4300G kernel: [drm] amdgpu kernel modesetting enabled. Jun 29 18:40:02 hp-4300G kernel: Virtual CRAT table created for CPU Jun 29 18:40:02 hp-4300G kernel: amdgpu: Topology: Add CPU node Jun 29 18:40:02 hp-4300G kernel: checking generic (d0000000 300000) vs hw (d0000000 10000000) Jun 29 18:40:02 hp-4300G kernel: fb0: switching to amdgpudrmfb from EFI VGA Jun 29 18:40:02 hp-4300G kernel: Console: switching to colour dummy device 80x25 Jun 29 18:40:02 hp-4300G kernel: amdgpu 0000:0c:00.0: vgaarb: deactivate vga console Jun 29 18:40:02 hp-4300G kernel: amdgpu 0000:0c:00.0: enabling device (0106 -> 0107) Jun 29 18:40:02 hp-4300G kernel: [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87D6 0xCA). Jun 29 18:40:02 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) Jun 29 18:40:02 hp-4300G kernel: [drm] register mmio base: 0xFCA00000 Jun 29 18:40:02 hp-4300G kernel: [drm] register mmio size: 524288 Jun 29 18:40:02 hp-4300G kernel: [drm] PCIE atomic ops is not supported Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 0 <soc15_common> Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 1 <gmc_v9_0> Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 2 <vega10_ih> Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 3 <psp> Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 4 <smu> Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 5 <gfx_v9_0> Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 6 <sdma_v4_0> Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 7 <dm> Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 8 <vcn_v2_0> Jun 29 18:40:02 hp-4300G kernel: [drm] add ip block number 9 <jpeg_v2_0> Jun 29 18:40:02 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: Fetched VBIOS from VFCT Jun 29 18:40:02 hp-4300G kernel: amdgpu: ATOM BIOS: 113-RENOIR-026 Jun 29 18:40:02 hp-4300G kernel: rtw_8821ce 0000:09:00.0: enabling device (0100 -> 0103) Jun 29 18:40:02 hp-4300G kernel: [drm] VCN decode is enabled in VM mode Jun 29 18:40:02 hp-4300G kernel: [drm] VCN encode is enabled in VM mode Jun 29 18:40:02 hp-4300G kernel: [drm] JPEG decode is enabled in VM mode Jun 29 18:40:02 hp-4300G kernel: [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit Jun 29 18:40:02 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) Jun 29 18:40:02 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF Jun 29 18:40:02 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF Jun 29 18:40:02 hp-4300G kernel: [drm] Detected VRAM RAM=512M, BAR=512M Jun 29 18:40:02 hp-4300G kernel: [drm] RAM width 64bits DDR4 Jun 29 18:40:02 hp-4300G kernel: [TTM] Zone kernel: Available graphics memory: 3750314 KiB Jun 29 18:40:02 hp-4300G kernel: [TTM] Zone dma32: Available graphics memory: 2097152 KiB Jun 29 18:40:02 hp-4300G kernel: rtw_8821ce 0000:09:00.0: Firmware version 24.8.0, H2C version 12 Jun 29 18:40:02 hp-4300G kernel: [drm] amdgpu: 512M of VRAM memory ready Jun 29 18:40:02 hp-4300G kernel: [drm] amdgpu: 3072M of GTT memory ready. Jun 29 18:40:02 hp-4300G kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144 Jun 29 18:40:02 hp-4300G kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). Jun 29 18:40:02 hp-4300G kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.0/0003:046D:C534.0001/input/input10 Jun 29 18:40:02 hp-4300G kernel: Bluetooth: Core ver 2.22 Jun 29 18:40:02 hp-4300G kernel: NET: Registered protocol family 31 Jun 29 18:40:02 hp-4300G kernel: Bluetooth: HCI device and connection manager initialized Jun 29 18:40:02 hp-4300G kernel: Bluetooth: HCI socket layer initialized Jun 29 18:40:02 hp-4300G kernel: Bluetooth: L2CAP socket layer initialized Jun 29 18:40:02 hp-4300G kernel: Bluetooth: SCO socket layer initialized Jun 29 18:40:02 hp-4300G kernel: [drm] Loading DMUB firmware via PSP: version=0x00000000 Jun 29 18:40:02 hp-4300G kernel: usbcore: registered new interface driver btusb Jun 29 18:40:02 hp-4300G kernel: hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 Jun 29 18:40:02 hp-4300G kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821 Jun 29 18:40:02 hp-4300G kernel: Bluetooth: hci0: RTL: rom_version status=0 version=1 Jun 29 18:40:02 hp-4300G kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin Jun 29 18:40:02 hp-4300G kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin Jun 29 18:40:02 hp-4300G kernel: Bluetooth: hci0: RTL: cfg_sz 10, total sz 31990 Jun 29 18:40:02 hp-4300G kernel: [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17 Jun 29 18:40:02 hp-4300G kernel: [drm] PSP loading VCN firmware Jun 29 18:40:03 hp-4300G kernel: rtw_8821ce 0000:09:00.0: start vif 74:12:b3:a0:4a:cb on port 0 Jun 29 18:40:03 hp-4300G kernel: [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR Jun 29 18:40:03 hp-4300G kernel: input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input11 Jun 29 18:40:03 hp-4300G kernel: input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input12 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: RAS: optional ras ta ucode is not available Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: RAP: optional rap ta ucode is not available Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: SMU is initialized successfully! Jun 29 18:40:03 hp-4300G kernel: [drm] kiq ring mec 2 pipe 1 q 0 Jun 29 18:40:03 hp-4300G kernel: [drm] Display Core initialized with v3.2.122! Jun 29 18:40:03 hp-4300G kernel: [drm] DMUB hardware initialized: version=0x01020008 Jun 29 18:40:03 hp-4300G kernel: input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input13 Jun 29 18:40:03 hp-4300G kernel: hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 Jun 29 18:40:03 hp-4300G kernel: usbcore: registered new interface driver usbhid Jun 29 18:40:03 hp-4300G kernel: usbhid: USB HID core driver Jun 29 18:40:03 hp-4300G kernel: snd_hda_intel 0000:0c:00.1: bound 0000:0c:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) Jun 29 18:40:03 hp-4300G kernel: [drm] VCN decode and encode initialized successfully(under DPG Mode). Jun 29 18:40:03 hp-4300G kernel: [drm] JPEG decode initialized successfully. Jun 29 18:40:03 hp-4300G kernel: kfd kfd: Allocated 3969056 bytes on gart Jun 29 18:40:03 hp-4300G kernel: Virtual CRAT table created for GPU Jun 29 18:40:03 hp-4300G kernel: amdgpu: Topology: Add dGPU node [0x1636:0x1002] Jun 29 18:40:03 hp-4300G kernel: kfd kfd: added device 1002:1636 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 18, active_cu_number 26 Jun 29 18:40:03 hp-4300G kernel: [drm] fb mappable at 0x220CD1000 Jun 29 18:40:03 hp-4300G kernel: [drm] vram apper at 0x220000000 Jun 29 18:40:03 hp-4300G kernel: [drm] size 8294400 Jun 29 18:40:03 hp-4300G kernel: [drm] fb depth is 24 Jun 29 18:40:03 hp-4300G kernel: [drm] pitch is 7680 Jun 29 18:40:03 hp-4300G kernel: fbcon: amdgpudrmfb (fb0) is primary device Jun 29 18:40:03 hp-4300G kernel: Console: switching to colour frame buffer device 240x67 Jun 29 18:40:03 hp-4300G kernel: logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: [drm] fb0: amdgpudrmfb frame buffer device Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 Jun 29 18:40:03 hp-4300G kernel: amdgpu 0000:0c:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 Jun 29 18:40:03 hp-4300G kernel: [drm] Initialized amdgpu 3.40.0 20150101 for 0000:0c:00.0 on minor 0 Jun 29 18:40:03 hp-4300G kernel: kauditd_printk_skb: 26 callbacks suppressed Jun 29 18:40:03 hp-4300G kernel: audit: type=1130 audit(1625017203.727:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:03 hp-4300G kernel: Bluetooth: hci0: RTL: fw version 0x829a7644 Jun 29 18:40:03 hp-4300G kernel: logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 Jun 29 18:40:03 hp-4300G kernel: logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 Jun 29 18:40:03 hp-4300G kernel: logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 Jun 29 18:40:03 hp-4300G kernel: mousedev: PS/2 mouse device common for all mice Jun 29 18:40:03 hp-4300G kernel: input: Logitech Wireless Keyboard PID:4075 Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input16 Jun 29 18:40:03 hp-4300G kernel: hid-generic 0003:046D:4075.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 Jun 29 18:40:04 hp-4300G kernel: input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input21 Jun 29 18:40:04 hp-4300G kernel: logitech-hidpp-device 0003:046D:4054.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:01:00.0-11/input1:2 Jun 29 18:40:04 hp-4300G kernel: input: Logitech Wireless Keyboard PID:4075 as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input22 Jun 29 18:40:04 hp-4300G kernel: logitech-hidpp-device 0003:046D:4075.0003: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 Jun 29 18:40:04 hp-4300G kernel: audit: type=1103 audit(1625017204.490:38): pid=464 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success' Jun 29 18:40:04 hp-4300G kernel: audit: type=1130 audit(1625017204.647:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@973 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:04 hp-4300G kernel: audit: type=1101 audit(1625017204.654:40): pid=468 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:04 hp-4300G kernel: audit: type=1103 audit(1625017204.654:41): pid=468 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' Jun 29 18:40:04 hp-4300G kernel: audit: type=1006 audit(1625017204.654:42): pid=468 uid=0 old-auid=4294967295 auid=973 tty=(none) old-ses=4294967295 ses=1 res=1 Jun 29 18:40:04 hp-4300G kernel: audit: type=1300 audit(1625017204.654:42): arch=c000003e syscall=1 success=yes exit=3 a0=9 a1=7ffc7624c2f0 a2=3 a3=3cd items=0 ppid=1 pid=468 auid=973 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null) Jun 29 18:40:04 hp-4300G kernel: audit: type=1327 audit(1625017204.654:42): proctitle="(systemd)" Jun 29 18:40:04 hp-4300G kernel: audit: type=1105 audit(1625017204.657:43): pid=468 uid=0 auid=973 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:04 hp-4300G kernel: audit: type=1334 audit(1625017204.660:44): prog-id=15 op=LOAD Jun 29 18:40:06 hp-4300G kernel: r8169 0000:0a:00.0 enp10s0: Link is Up - 1Gbps/Full - flow control rx/tx Jun 29 18:40:06 hp-4300G kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready Jun 29 18:40:31 hp-4300G kernel: kauditd_printk_skb: 6 callbacks suppressed Jun 29 18:40:31 hp-4300G kernel: audit: type=1101 audit(1625017231.361:49): pid=520 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' Jun 29 18:40:31 hp-4300G kernel: audit: type=1103 audit(1625017231.401:50): pid=520 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' Jun 29 18:40:31 hp-4300G kernel: audit: type=1006 audit(1625017231.401:51): pid=520 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1 Jun 29 18:40:31 hp-4300G kernel: audit: type=1300 audit(1625017231.401:51): arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffd3b8c3e70 a2=4 a3=3e8 items=0 ppid=375 pid=520 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="sshd" exe="/usr/bin/sshd" key=(null) Jun 29 18:40:31 hp-4300G kernel: audit: type=1327 audit(1625017231.401:51): proctitle=737368643A206E617468616E205B707269765D Jun 29 18:40:31 hp-4300G kernel: audit: type=1130 audit(1625017231.424:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:31 hp-4300G kernel: audit: type=1101 audit(1625017231.427:53): pid=523 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Jun 29 18:40:31 hp-4300G kernel: audit: type=1103 audit(1625017231.427:54): pid=523 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' Jun 29 18:40:31 hp-4300G kernel: audit: type=1006 audit(1625017231.427:55): pid=523 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1 Jun 29 18:40:31 hp-4300G kernel: audit: type=1300 audit(1625017231.427:55): arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7ffc7624c2f0 a2=4 a3=3e8 items=0 ppid=1 pid=523 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null)
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 12 lines · Nathan Chancellor
Quoted 9 lines · Claire Chang
Propagate the
swiotlb_forceintoio_tlb_default_mem->force_bounceand use it to determine whether to bounce the data or not. This will be useful later to allow for different pools.Signed-off-by Claire Chang <[email protected]>Reviewed-by Christoph Hellwig <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>
Quoted 7 lines
This patch as commit
af452ec1b1a3("swiotlb: Useis_swiotlb_force_bouncefor swiotlb data bouncing") causes my Ryzen 3 4300G system to fail to get to an X session consistently (although not every single time), presumably due to a crash in the AMDGPU driver that I see in dmesg.I have attached logs at
af452ec1b1a3andf127c9556a8eand I am happy to provide any further information, debug, or test patches as necessary.
Are you using swiotlb=force? or the swiotlb_map is called because of
!dma_capable? (https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/kernel/dma/direct.h#n93)
BUG: unable to handle page fault for address: 00000000003a8290 and the fact it crashed at _raw_spin_lock_irqsave look like the memory (maybe dev->dma_io_tlb_mem) was corrupted?
The dev->dma_io_tlb_mem should be set here
(https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/probe.c#n2528)
through device_initialize.
I can't tell what happened from the logs, but maybe we could try KASAN to see if it provides more clue.
Thanks,
Claire
Quoted 3 lines
Cheers,
Nathan
Will Deacon
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 18 lines · Claire Chang
Quoted 17 lines · Nathan Chancellor
Quoted 9 lines · Claire Chang
Propagate the
swiotlb_forceintoio_tlb_default_mem->force_bounceand use it to determine whether to bounce the data or not. This will be useful later to allow for different pools.Signed-off-by Claire Chang <[email protected]>Reviewed-by Christoph Hellwig <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>This patch as commit
af452ec1b1a3("swiotlb: Useis_swiotlb_force_bouncefor swiotlb data bouncing") causes my Ryzen 3 4300G system to fail to get to an X session consistently (although not every single time), presumably due to a crash in the AMDGPU driver that I see in dmesg.
Quoted 5 lines
Quoted 2 lines
I have attached logs at
af452ec1b1a3andf127c9556a8eand I am happy to provide any further information, debug, or test patches as necessary.Are you using swiotlb=force? or the
swiotlb_mapis called because of
!dma_capable? (https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/kernel/dma/direct.h#n93)
The command line is in the dmesg:
| Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux-next-llvm.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp irqpoll
but I worry that this looks _very_ similar to the issue reported by Qian Cai which we thought we had fixed. Nathan -- is the failure deterministic?
Quoted 6 lines
BUG: unable to handle page fault for address: 00000000003a8290and the fact it crashed at_raw_spin_lock_irqsavelook like the memory (maybedev->dma_io_tlb_mem) was corrupted?
Thedev->dma_io_tlb_memshould be set here
(https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/probe.c#n2528)
throughdevice_initialize.
I'm less sure about this. 'dma_io_tlb_mem' should be pointing at 'io_tlb_default_mem', which is a page-aligned allocation from memblock. The spinlock is at offset 0x24 in that structure, and looking at the register dump from the crash:
Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: Call Trace: Jun 29 18:28:42 hp-4300G kernel: _raw_spin_lock_irqsave+0x39/0x50 Jun 29 18:28:42 hp-4300G kernel: swiotlb_tbl_map_single+0x12b/0x4c0
Then that correlates with R11 holding the 'dma_io_tlb_mem' pointer and RDX pointing at the spinlock. Yet RAX is holding junk :/
I agree that enabling KASAN would be a good idea, but I also think we probably need to get some more information out of swiotlb_tbl_map_single() to see see what exactly is going wrong in there.
Will
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Hi Will and Claire,
Quoted 25 lines · Will Deacon
Quoted 18 lines · Claire Chang
Quoted 17 lines · Nathan Chancellor
Quoted 9 lines · Claire Chang
Propagate the
swiotlb_forceintoio_tlb_default_mem->force_bounceand use it to determine whether to bounce the data or not. This will be useful later to allow for different pools.Signed-off-by Claire Chang <[email protected]>Reviewed-by Christoph Hellwig <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>This patch as commit
af452ec1b1a3("swiotlb: Useis_swiotlb_force_bouncefor swiotlb data bouncing") causes my Ryzen 3 4300G system to fail to get to an X session consistently (although not every single time), presumably due to a crash in the AMDGPU driver that I see in dmesg.Quoted 5 lines
Quoted 2 lines
I have attached logs at
af452ec1b1a3andf127c9556a8eand I am happy to provide any further information, debug, or test patches as necessary.Are you using swiotlb=force? or the
swiotlb_mapis called because of
!dma_capable? (https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/kernel/dma/direct.h#n93)
Quoted 6 lines
The command line is in the dmesg:
| Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux-next-llvm.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp irqpoll
but I worry that this looks _very_ similar to the issue reported by Qian Cai which we thought we had fixed. Nathan -- is the failure deterministic?
Yes, for the most part. It does not happen every single boot so when I was bisecting, I did a series of seven boots and only considered the revision good when all seven of them made it to LightDM's greeter. My results that I notated show most bad revisions failed anywhere from four to six times.
Quoted 25 lines
Quoted 6 lines
BUG: unable to handle page fault for address: 00000000003a8290and the fact it crashed at_raw_spin_lock_irqsavelook like the memory (maybedev->dma_io_tlb_mem) was corrupted?
Thedev->dma_io_tlb_memshould be set here
(https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/probe.c#n2528)
throughdevice_initialize.I'm less sure about this. '
dma_io_tlb_mem' should be pointing at 'io_tlb_default_mem', which is a page-aligned allocation from memblock. The spinlock is at offset0x24in that structure, and looking at the register dump from the crash:Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: Call Trace: Jun 29 18:28:42 hp-4300G kernel: _raw_spin_lock_irqsave+0x39/0x50 Jun 29 18:28:42 hp-4300G kernel: swiotlb_tbl_map_single+0x12b/0x4c0
Quoted 6 lines
Then that correlates with R11 holding the '
dma_io_tlb_mem' pointer and RDX pointing at the spinlock. Yet RAX is holding junk :/I agree that enabling KASAN would be a good idea, but I also think we probably need to get some more information out of
swiotlb_tbl_map_single()to see see what exactly is going wrong in there.
I can certainly enable KASAN and if there is any debug print I can add or dump anything, let me know!
Cheers,
Nathan
Will Deacon
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 30 lines · Nathan Chancellor
Quoted 29 lines · Will Deacon
Quoted 6 lines · Claire Chang
BUG: unable to handle page fault for address: 00000000003a8290and the fact it crashed at_raw_spin_lock_irqsavelook like the memory (maybedev->dma_io_tlb_mem) was corrupted?
Thedev->dma_io_tlb_memshould be set here
(https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/probe.c#n2528)
throughdevice_initialize.I'm less sure about this. '
dma_io_tlb_mem' should be pointing at 'io_tlb_default_mem', which is a page-aligned allocation from memblock. The spinlock is at offset0x24in that structure, and looking at the register dump from the crash:Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: Call Trace: Jun 29 18:28:42 hp-4300G kernel: _raw_spin_lock_irqsave+0x39/0x50 Jun 29 18:28:42 hp-4300G kernel: swiotlb_tbl_map_single+0x12b/0x4c0Then that correlates with R11 holding the '
dma_io_tlb_mem' pointer and RDX pointing at the spinlock. Yet RAX is holding junk :/
Quoted 6 lines
Quoted 3 lines
I agree that enabling KASAN would be a good idea, but I also think we probably need to get some more information out of
swiotlb_tbl_map_single()to see see what exactly is going wrong in there.I can certainly enable KASAN and if there is any debug print I can add or dump anything, let me know!
I bit the bullet and took v5.13 with swiotlb/for-linus-5.14 merged in, built x86 defconfig and ran it on my laptop. However, it seems to work fine!
Please can you share your .config?
Will
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 35 lines · Will Deacon
Quoted 34 lines · Nathan Chancellor
Quoted 32 lines · Will Deacon
Quoted 6 lines · Claire Chang
BUG: unable to handle page fault for address: 00000000003a8290and the fact it crashed at_raw_spin_lock_irqsavelook like the memory (maybedev->dma_io_tlb_mem) was corrupted?
Thedev->dma_io_tlb_memshould be set here
(https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/probe.c#n2528)
throughdevice_initialize.I'm less sure about this. '
dma_io_tlb_mem' should be pointing at 'io_tlb_default_mem', which is a page-aligned allocation from memblock. The spinlock is at offset0x24in that structure, and looking at the register dump from the crash:Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: Call Trace: Jun 29 18:28:42 hp-4300G kernel: _raw_spin_lock_irqsave+0x39/0x50 Jun 29 18:28:42 hp-4300G kernel: swiotlb_tbl_map_single+0x12b/0x4c0Then that correlates with R11 holding the '
dma_io_tlb_mem' pointer and RDX pointing at the spinlock. Yet RAX is holding junk :/I agree that enabling KASAN would be a good idea, but I also think we probably need to get some more information out of
swiotlb_tbl_map_single()to see see what exactly is going wrong in there.
Quoted 7 lines
Quoted 2 lines
I can certainly enable KASAN and if there is any debug print I can add or dump anything, let me know!
I bit the bullet and took v5.13 with swiotlb/for-linus-5.14 merged in, built x86 defconfig and ran it on my laptop. However, it seems to work fine!
Please can you share your .config?
Sure thing, it is attached. It is just Arch Linux's config run through olddefconfig. The original is below in case you need to diff it.
If there is anything more that I can provide, please let me know.
Cheers,
Nathan
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.12.0-rc3 Kernel Configuration
#CONFIG_CC_VERSION_TEXT="gcc (GCC) 11.1.0"CONFIG_CC_IS_GCC=yCONFIG_GCC_VERSION=110100CONFIG_CLANG_VERSION=0CONFIG_LD_IS_BFD=yCONFIG_LD_VERSION=23601CONFIG_LLD_VERSION=0CONFIG_CC_CAN_LINK=yCONFIG_CC_CAN_LINK_STATIC=yCONFIG_CC_HAS_ASM_GOTO=yCONFIG_CC_HAS_ASM_GOTO_OUTPUT=yCONFIG_CC_HAS_ASM_INLINE=yCONFIG_IRQ_WORK=yCONFIG_BUILDTIME_TABLE_SORT=yCONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not setCONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_BUILD_SALT=""CONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=yCONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not setCONFIG_KERNEL_ZSTD=yCONFIG_DEFAULT_INIT=""CONFIG_DEFAULT_HOSTNAME="archlinux"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_WATCH_QUEUE=yCONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not setCONFIG_AUDIT=yCONFIG_HAVE_ARCH_AUDITSYSCALL=yCONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_MIGRATION=yCONFIG_GENERIC_IRQ_INJECTION=yCONFIG_HARDIRQS_SW_RESEND=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_SIM=yCONFIG_IRQ_DOMAIN_HIERARCHY=yCONFIG_GENERIC_MSI_IRQ=yCONFIG_GENERIC_MSI_IRQ_DOMAIN=yCONFIG_IRQ_MSI_IOMMU=yCONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=yCONFIG_GENERIC_IRQ_RESERVATION_MODE=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_INIT=yCONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=yCONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=yCONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not setCONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_PREEMPT_COUNT=yCONFIG_PREEMPTION=yCONFIG_PREEMPT_DYNAMIC=y
#
# CPU/Task time and stats accounting
#CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not setCONFIG_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_SCHED_AVG_IRQ=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=yCONFIG_PREEMPT_RCU=yCONFIG_RCU_EXPERT=yCONFIG_SRCU=yCONFIG_TREE_SRCU=yCONFIG_TASKS_RCU_GENERIC=yCONFIG_TASKS_RCU=yCONFIG_TASKS_RUDE_RCU=yCONFIG_TASKS_TRACE_RCU=yCONFIG_RCU_STALL_COMMON=yCONFIG_RCU_NEED_SEGCBLIST=yCONFIG_RCU_FANOUT=64CONFIG_RCU_FANOUT_LEAF=16CONFIG_RCU_FAST_NO_HZ=yCONFIG_RCU_BOOST=yCONFIG_RCU_BOOST_DELAY=500
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=yCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_IKHEADERS=mCONFIG_LOG_BUF_SHIFT=17CONFIG_LOG_CPU_MAX_BUF_SHIFT=12CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#CONFIG_UCLAMP_TASK=yCONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=yCONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=yCONFIG_CC_HAS_INT128=yCONFIG_ARCH_SUPPORTS_INT128=yCONFIG_NUMA_BALANCING=yCONFIG_NUMA_BALANCING_DEFAULT_ENABLED=yCONFIG_CGROUPS=yCONFIG_PAGE_COUNTER=yCONFIG_MEMCG=yCONFIG_MEMCG_SWAP=yCONFIG_MEMCG_KMEM=yCONFIG_BLK_CGROUP=yCONFIG_CGROUP_WRITEBACK=yCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not setCONFIG_UCLAMP_TASK_GROUP=yCONFIG_CGROUP_PIDS=yCONFIG_CGROUP_RDMA=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_HUGETLB=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_DEVICE=yCONFIG_CGROUP_CPUACCT=yCONFIG_CGROUP_PERF=yCONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not setCONFIG_SOCK_CGROUP_DATA=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_TIME_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=yCONFIG_CHECKPOINT_RESTORE=yCONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not setCONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_RD_XZ=yCONFIG_RD_LZO=yCONFIG_RD_LZ4=yCONFIG_RD_ZSTD=yCONFIG_BOOT_CONFIG=yCONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_LD_ORPHAN_WARN=yCONFIG_SYSCTL=yCONFIG_HAVE_UID16=yCONFIG_SYSCTL_EXCEPTION_TRACE=yCONFIG_HAVE_PCSPKR_PLATFORM=yCONFIG_BPF=y
# CONFIG_EXPERT is not setCONFIG_UID16=yCONFIG_MULTIUSER=yCONFIG_SGETMASK_SYSCALL=yCONFIG_SYSFS_SYSCALL=yCONFIG_FHANDLE=yCONFIG_POSIX_TIMERS=yCONFIG_PRINTK=yCONFIG_PRINTK_NMI=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_FUTEX_PI=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_IO_URING=yCONFIG_ADVISE_SYSCALLS=yCONFIG_HAVE_ARCH_USERFAULTFD_WP=yCONFIG_MEMBARRIER=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_ABSOLUTE_PERCPU=yCONFIG_KALLSYMS_BASE_RELATIVE=yCONFIG_BPF_LSM=yCONFIG_BPF_SYSCALL=yCONFIG_ARCH_WANT_DEFAULT_BPF_JIT=yCONFIG_BPF_JIT_ALWAYS_ON=yCONFIG_BPF_JIT_DEFAULT_ON=yCONFIG_USERMODE_DRIVER=yCONFIG_BPF_PRELOAD=yCONFIG_BPF_PRELOAD_UMD=mCONFIG_USERFAULTFD=yCONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=yCONFIG_KCMP=yCONFIG_RSEQ=y
# CONFIG_EMBEDDED is not setCONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=yCONFIG_SLAB_MERGE_DEFAULT=yCONFIG_SLAB_FREELIST_RANDOM=yCONFIG_SLAB_FREELIST_HARDENED=yCONFIG_SHUFFLE_PAGE_ALLOCATOR=yCONFIG_SLUB_CPU_PARTIAL=yCONFIG_SYSTEM_DATA_VERIFICATION=yCONFIG_PROFILING=yCONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_MMU=yCONFIG_ARCH_MMAP_RND_BITS_MIN=28CONFIG_ARCH_MMAP_RND_BITS_MAX=32CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16CONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_ARCH_HAS_FILTER_PGPROT=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ARCH_WANT_GENERAL_HUGETLB=yCONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=yCONFIG_HAVE_INTEL_TXT=yCONFIG_X86_64_SMP=yCONFIG_ARCH_SUPPORTS_UPROBES=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_DYNAMIC_PHYSICAL_MASK=yCONFIG_PGTABLE_LEVELS=5CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#CONFIG_ZONE_DMA=yCONFIG_SMP=yCONFIG_X86_FEATURE_NAMES=yCONFIG_X86_X2APIC=yCONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not setCONFIG_RETPOLINE=yCONFIG_X86_CPU_RESCTRL=y
# CONFIG_X86_EXTENDED_PLATFORM is not setCONFIG_X86_INTEL_LPSS=yCONFIG_X86_AMD_PLATFORM_DEVICE=yCONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not setCONFIG_X86_SUPPORTS_MEMORY_FAILURE=yCONFIG_SCHED_OMIT_FRAME_POINTER=yCONFIG_HYPERVISOR_GUEST=yCONFIG_PARAVIRT=yCONFIG_PARAVIRT_XXL=y
# CONFIG_PARAVIRT_DEBUG is not setCONFIG_PARAVIRT_SPINLOCKS=yCONFIG_X86_HV_CALLBACK_VECTOR=yCONFIG_XEN=yCONFIG_XEN_PV=yCONFIG_XEN_512GB=yCONFIG_XEN_PV_SMP=yCONFIG_XEN_DOM0=yCONFIG_XEN_PVHVM=yCONFIG_XEN_PVHVM_SMP=yCONFIG_XEN_PVHVM_GUEST=yCONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not setCONFIG_XEN_PVH=yCONFIG_KVM_GUEST=yCONFIG_ARCH_CPUIDLE_HALTPOLL=yCONFIG_PVH=yCONFIG_PARAVIRT_TIME_ACCOUNTING=yCONFIG_PARAVIRT_CLOCK=yCONFIG_JAILHOUSE_GUEST=yCONFIG_ACRN_GUEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=6CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_IA32_FEAT_CTL=yCONFIG_X86_VMX_FEATURE_NAMES=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_HYGON=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_CPU_SUP_ZHAOXIN=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_MAXSMP is not setCONFIG_NR_CPUS_RANGE_BEGIN=2CONFIG_NR_CPUS_RANGE_END=512CONFIG_NR_CPUS_DEFAULT=64CONFIG_NR_CPUS=320CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=yCONFIG_SCHED_MC_PRIO=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not setCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=yCONFIG_X86_MCE_INJECT=m
#
# Performance monitoring
#CONFIG_PERF_EVENTS_INTEL_UNCORE=mCONFIG_PERF_EVENTS_INTEL_RAPL=mCONFIG_PERF_EVENTS_INTEL_CSTATE=mCONFIG_PERF_EVENTS_AMD_POWER=m
# end of Performance monitoring
CONFIG_X86_16BIT=yCONFIG_X86_ESPFIX64=y CONFIG_X86_VSYSCALL_EMULATION=y CONFIG_X86_IOPL_IOPERM=yCONFIG_I8K=mCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_AMD=y
# CONFIG_MICROCODE_OLD_INTERFACE is not set CONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_X86_5LEVEL=y CONFIG_X86_DIRECT_GBPAGES=y CONFIG_X86_CPA_STATISTICS=y CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set CONFIG_NUMA=yCONFIG_AMD_NUMA=yCONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=5 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_X86_PMEM_LEGACY_DEVICE=y CONFIG_X86_PMEM_LEGACY=m CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW=64CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=0 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=yCONFIG_X86_SMAP=yCONFIG_X86_UMIP=y CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
# CONFIG_X86_INTEL_TSX_MODE_OFF is not set
# CONFIG_X86_INTEL_TSX_MODE_ON is not set CONFIG_X86_INTEL_TSX_MODE_AUTO=y CONFIG_X86_SGX=yCONFIG_EFI=yCONFIG_EFI_STUB=yCONFIG_EFI_MIXED=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_300=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=300CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_KEXEC_FILE=y CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set CONFIG_CRASH_DUMP=yCONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=yCONFIG_RANDOMIZE_BASE=y CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_DYNAMIC_MEMORY_LAYOUT=y CONFIG_RANDOMIZE_MEMORY=y CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_MODIFY_LDT_SYSCALL=y CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=yCONFIG_USE_PERCPU_NUMA_NODE_ID=yCONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=yCONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=yCONFIG_ARCH_ENABLE_THP_MIGRATION=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATE_CALLBACKS=yCONFIG_HIBERNATION=yCONFIG_HIBERNATION_SNAPSHOT_DEV=yCONFIG_PM_STD_PARTITION=""CONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not setCONFIG_PM_SLEEP_DEBUG=yCONFIG_PM_TRACE=yCONFIG_PM_TRACE_RTC=yCONFIG_PM_CLK=yCONFIG_PM_GENERIC_DOMAINS=yCONFIG_WQ_POWER_EFFICIENT_DEFAULT=yCONFIG_PM_GENERIC_DOMAINS_SLEEP=yCONFIG_ENERGY_MODEL=yCONFIG_ARCH_SUPPORTS_ACPI=yCONFIG_ACPI=yCONFIG_ACPI_LEGACY_TABLES_LOOKUP=yCONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=yCONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not setCONFIG_ACPI_SPCR_TABLE=yCONFIG_ACPI_FPDT=yCONFIG_ACPI_LPIT=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_REV_OVERRIDE_POSSIBLE=yCONFIG_ACPI_EC_DEBUGFS=mCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=yCONFIG_ACPI_TAD=mCONFIG_ACPI_DOCK=yCONFIG_ACPI_CPU_FREQ_PSS=yCONFIG_ACPI_PROCESSOR_CSTATE=yCONFIG_ACPI_PROCESSOR_IDLE=yCONFIG_ACPI_CPPC_LIB=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_IPMI=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_PROCESSOR_AGGREGATOR=mCONFIG_ACPI_THERMAL=yCONFIG_ACPI_PLATFORM_PROFILE=mCONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=yCONFIG_ACPI_TABLE_UPGRADE=yCONFIG_ACPI_DEBUG=yCONFIG_ACPI_PCI_SLOT=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=yCONFIG_ACPI_HOTPLUG_IOAPIC=yCONFIG_ACPI_SBS=mCONFIG_ACPI_HED=yCONFIG_ACPI_CUSTOM_METHOD=mCONFIG_ACPI_BGRT=yCONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not setCONFIG_ACPI_NUMA=yCONFIG_ACPI_HMAT=yCONFIG_HAVE_ACPI_APEI=yCONFIG_HAVE_ACPI_APEI_NMI=yCONFIG_ACPI_APEI=yCONFIG_ACPI_APEI_GHES=yCONFIG_ACPI_APEI_PCIEAER=yCONFIG_ACPI_APEI_MEMORY_FAILURE=yCONFIG_ACPI_APEI_EINJ=mCONFIG_ACPI_APEI_ERST_DEBUG=mCONFIG_ACPI_DPTF=yCONFIG_DPTF_POWER=mCONFIG_DPTF_PCH_FIVR=mCONFIG_ACPI_WATCHDOG=yCONFIG_ACPI_EXTLOG=mCONFIG_ACPI_ADXL=yCONFIG_ACPI_CONFIGFS=mCONFIG_PMIC_OPREGION=yCONFIG_BYTCRC_PMIC_OPREGION=yCONFIG_CHTCRC_PMIC_OPREGION=yCONFIG_XPOWER_PMIC_OPREGION=yCONFIG_BXT_WC_PMIC_OPREGION=yCONFIG_CHT_WC_PMIC_OPREGION=yCONFIG_CHT_DC_TI_PMIC_OPREGION=yCONFIG_TPS68470_PMIC_OPREGION=yCONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#CONFIG_X86_INTEL_PSTATE=yCONFIG_X86_PCC_CPUFREQ=mCONFIG_X86_ACPI_CPUFREQ=mCONFIG_X86_ACPI_CPUFREQ_CPB=yCONFIG_X86_POWERNOW_K8=mCONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not setCONFIG_X86_P4_CLOCKMOD=m
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=m # end of CPU Frequency scaling
#
# CPU Idle
#CONFIG_CPU_IDLE=yCONFIG_CPU_IDLE_GOV_LADDER=yCONFIG_CPU_IDLE_GOV_MENU=yCONFIG_CPU_IDLE_GOV_TEO=yCONFIG_CPU_IDLE_GOV_HALTPOLL=yCONFIG_HALTPOLL_CPUIDLE=m
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#CONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_XEN=yCONFIG_MMCONF_FAM10H=yCONFIG_ISA_DMA_API=yCONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not setCONFIG_COMPAT_32=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
#
# Firmware Drivers
#CONFIG_EDD=m
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DMIID=yCONFIG_DMI_SYSFS=yCONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=mCONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not setCONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_SMI is not setCONFIG_GOOGLE_COREBOOT_TABLE=mCONFIG_GOOGLE_MEMCONSOLE=m
# CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY is not setCONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=mCONFIG_GOOGLE_MEMCONSOLE_COREBOOT=mCONFIG_GOOGLE_VPD=m
#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not setCONFIG_EFI_ESRT=yCONFIG_EFI_VARS_PSTORE=yCONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=yCONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not setCONFIG_EFI_SOFT_RESERVE=yCONFIG_EFI_RUNTIME_WRAPPERS=yCONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=yCONFIG_EFI_BOOTLOADER_CONTROL=mCONFIG_EFI_CAPSULE_LOADER=m
# CONFIG_EFI_TEST is not setCONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not setCONFIG_EFI_RCI2_TABLE=y
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_EFI_EMBEDDED_FIRMWARE=yCONFIG_UEFI_CPER=yCONFIG_UEFI_CPER_X86=yCONFIG_EFI_DEV_PATH_PARSER=yCONFIG_EFI_EARLYCON=yCONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver # end of Firmware Drivers
CONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_HAVE_KVM_IRQFD=yCONFIG_HAVE_KVM_IRQ_ROUTING=yCONFIG_HAVE_KVM_EVENTFD=yCONFIG_KVM_MMIO=yCONFIG_KVM_ASYNC_PF=yCONFIG_HAVE_KVM_MSI=yCONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=yCONFIG_KVM_VFIO=yCONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=yCONFIG_KVM_COMPAT=yCONFIG_HAVE_KVM_IRQ_BYPASS=yCONFIG_HAVE_KVM_NO_POLL=yCONFIG_KVM_XFER_TO_GUEST_WORK=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=mCONFIG_KVM_AMD=mCONFIG_KVM_AMD_SEV=yCONFIG_KVM_XEN=yCONFIG_KVM_MMU_AUDIT=yCONFIG_AS_AVX512=yCONFIG_AS_SHA1_NI=yCONFIG_AS_SHA256_NI=yCONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#CONFIG_CRASH_CORE=yCONFIG_KEXEC_CORE=yCONFIG_HOTPLUG_SMT=yCONFIG_GENERIC_ENTRY=yCONFIG_KPROBES=yCONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not setCONFIG_OPTPROBES=yCONFIG_KPROBES_ON_FTRACE=yCONFIG_UPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_ARCH_USE_BUILTIN_BSWAP=yCONFIG_KRETPROBES=yCONFIG_USER_RETURN_NOTIFIER=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_KPROBES_ON_FTRACE=yCONFIG_HAVE_FUNCTION_ERROR_INJECTION=yCONFIG_HAVE_NMI=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_CONTIGUOUS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_ARCH_HAS_FORTIFY_SOURCE=yCONFIG_ARCH_HAS_SET_MEMORY=yCONFIG_ARCH_HAS_SET_DIRECT_MAP=yCONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=yCONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=yCONFIG_HAVE_ASM_MODVERSIONS=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_RSEQ=yCONFIG_HAVE_FUNCTION_ARG_ACCESS_API=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_PERF_EVENTS_NMI=yCONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=yCONFIG_HAVE_PERF_REGS=yCONFIG_HAVE_PERF_USER_STACK_DUMP=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=yCONFIG_MMU_GATHER_TABLE_FREE=yCONFIG_MMU_GATHER_RCU_TABLE_FREE=yCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=yCONFIG_HAVE_ALIGNED_STRUCT_PAGE=yCONFIG_HAVE_CMPXCHG_LOCAL=yCONFIG_HAVE_CMPXCHG_DOUBLE=yCONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=yCONFIG_ARCH_WANT_OLD_COMPAT_IPC=yCONFIG_HAVE_ARCH_SECCOMP=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_SECCOMP=yCONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not setCONFIG_HAVE_ARCH_STACKLEAK=yCONFIG_HAVE_STACKPROTECTOR=yCONFIG_STACKPROTECTOR=yCONFIG_STACKPROTECTOR_STRONG=yCONFIG_ARCH_SUPPORTS_LTO_CLANG=yCONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=yCONFIG_LTO_NONE=yCONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=yCONFIG_HAVE_CONTEXT_TRACKING=yCONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=yCONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=yCONFIG_HAVE_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_MOVE_PUD=yCONFIG_HAVE_MOVE_PMD=yCONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=yCONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=yCONFIG_HAVE_ARCH_HUGE_VMAP=yCONFIG_ARCH_WANT_HUGE_PMD_SHARE=yCONFIG_HAVE_ARCH_SOFT_DIRTY=yCONFIG_HAVE_MOD_ARCH_SPECIFIC=yCONFIG_MODULES_USE_ELF_RELA=yCONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=yCONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=yCONFIG_ARCH_HAS_ELF_RANDOMIZE=yCONFIG_HAVE_ARCH_MMAP_RND_BITS=yCONFIG_HAVE_EXIT_THREAD=yCONFIG_ARCH_MMAP_RND_BITS=28CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=yCONFIG_ARCH_MMAP_RND_COMPAT_BITS=8CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=yCONFIG_HAVE_STACK_VALIDATION=yCONFIG_HAVE_RELIABLE_STACKTRACE=yCONFIG_ISA_BUS_API=yCONFIG_OLD_SIGSUSPEND3=yCONFIG_COMPAT_OLD_SIGACTION=yCONFIG_COMPAT_32BIT_TIME=yCONFIG_HAVE_ARCH_VMAP_STACK=yCONFIG_VMAP_STACK=yCONFIG_ARCH_HAS_STRICT_KERNEL_RWX=yCONFIG_STRICT_KERNEL_RWX=yCONFIG_ARCH_HAS_STRICT_MODULE_RWX=yCONFIG_STRICT_MODULE_RWX=yCONFIG_HAVE_ARCH_PREL32_RELOCATIONS=yCONFIG_ARCH_USE_MEMREMAP_PROT=yCONFIG_LOCK_EVENT_COUNTS=yCONFIG_ARCH_HAS_MEM_ENCRYPT=yCONFIG_HAVE_STATIC_CALL=yCONFIG_HAVE_STATIC_CALL_INLINE=yCONFIG_HAVE_PREEMPT_DYNAMIC=yCONFIG_ARCH_WANT_LD_ORPHAN_WARN=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_ARCH_HAS_ELFCORE_COMPAT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not setCONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=yCONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULE_SIG_FORMAT=yCONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not setCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not setCONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not setCONFIG_MODULE_SIG_SHA512=yCONFIG_MODULE_SIG_HASH="sha512"CONFIG_MODULE_COMPRESS=y
# CONFIG_MODULE_COMPRESS_GZIP is not setCONFIG_MODULE_COMPRESS_XZ=yCONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=yCONFIG_MODULES_TREE_LOOKUP=yCONFIG_BLOCK=yCONFIG_BLK_RQ_ALLOC_TIME=yCONFIG_BLK_SCSI_REQUEST=yCONFIG_BLK_CGROUP_RWSTAT=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_BSGLIB=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLK_DEV_INTEGRITY_T10=yCONFIG_BLK_DEV_ZONED=yCONFIG_BLK_DEV_THROTTLING=yCONFIG_BLK_DEV_THROTTLING_LOW=y
# CONFIG_BLK_CMDLINE_PARSER is not setCONFIG_BLK_WBT=yCONFIG_BLK_CGROUP_IOLATENCY=yCONFIG_BLK_CGROUP_IOCOST=yCONFIG_BLK_WBT_MQ=yCONFIG_BLK_DEBUG_FS=yCONFIG_BLK_DEBUG_FS_ZONED=yCONFIG_BLK_SED_OPAL=yCONFIG_BLK_INLINE_ENCRYPTION=yCONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not setCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not setCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=yCONFIG_BLK_MQ_PCI=yCONFIG_BLK_MQ_VIRTIO=yCONFIG_BLK_MQ_RDMA=yCONFIG_BLK_PM=y
#
# IO Schedulers
#CONFIG_MQ_IOSCHED_DEADLINE=yCONFIG_MQ_IOSCHED_KYBER=yCONFIG_IOSCHED_BFQ=yCONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=yCONFIG_PADATA=yCONFIG_ASN1=yCONFIG_UNINLINE_SPIN_UNLOCK=yCONFIG_ARCH_SUPPORTS_ATOMIC_RMW=yCONFIG_MUTEX_SPIN_ON_OWNER=yCONFIG_RWSEM_SPIN_ON_OWNER=yCONFIG_LOCK_SPIN_ON_OWNER=yCONFIG_ARCH_USE_QUEUED_SPINLOCKS=yCONFIG_QUEUED_SPINLOCKS=yCONFIG_ARCH_USE_QUEUED_RWLOCKS=yCONFIG_QUEUED_RWLOCKS=yCONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=yCONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=yCONFIG_ARCH_HAS_SYSCALL_WRAPPER=yCONFIG_FREEZER=y
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_ELFCORE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=yCONFIG_BINFMT_SCRIPT=yCONFIG_BINFMT_MISC=yCONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_FAST_GUP=y CONFIG_NUMA_KEEP_MEMINFO=y CONFIG_MEMORY_ISOLATION=y CONFIG_HAVE_BOOTMEM_INFO_NODE=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MEMORY_BALLOON=y CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=yCONFIG_PAGE_REPORTING=yCONFIG_MIGRATION=yCONFIG_CONTIG_ALLOC=y CONFIG_PHYS_ADDR_T_64BIT=yCONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y CONFIG_HWPOISON_INJECT=m CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y CONFIG_ARCH_WANTS_THP_SWAP=y CONFIG_THP_SWAP=yCONFIG_CLEANCACHE=yCONFIG_FRONTSWAP=yCONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set CONFIG_CMA_DEBUGFS=yCONFIG_CMA_AREAS=7CONFIG_MEM_SOFT_DIRTY=yCONFIG_ZSWAP=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lz4"
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="z3fold" CONFIG_ZSWAP_DEFAULT_ON=yCONFIG_ZPOOL=yCONFIG_ZBUD=yCONFIG_Z3FOLD=yCONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set CONFIG_IDLE_PAGE_TRACKING=y CONFIG_ARCH_HAS_PTE_DEVMAP=y CONFIG_ZONE_DEVICE=y CONFIG_DEV_PAGEMAP_OPS=yCONFIG_HMM_MIRROR=yCONFIG_DEVICE_PRIVATE=yCONFIG_VMAP_PFN=y CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set CONFIG_READ_ONLY_THP_FOR_FS=y CONFIG_ARCH_HAS_PTE_SPECIAL=y CONFIG_MAPPING_DIRTY_HELPERS=y
# end of Memory Management options
CONFIG_NET=yCONFIG_COMPAT_NETLINK_MESSAGES=yCONFIG_NET_INGRESS=yCONFIG_NET_EGRESS=yCONFIG_NET_REDIRECT=yCONFIG_SKB_EXTENSIONS=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_DIAG=mCONFIG_UNIX=yCONFIG_UNIX_SCM=yCONFIG_UNIX_DIAG=mCONFIG_TLS=mCONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not setCONFIG_XFRM=yCONFIG_XFRM_OFFLOAD=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not setCONFIG_XFRM_INTERFACE=mCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_AH=mCONFIG_XFRM_ESP=mCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=mCONFIG_NET_KEY_MIGRATE=yCONFIG_XFRM_ESPINTCP=yCONFIG_SMC=mCONFIG_SMC_DIAG=mCONFIG_XDP_SOCKETS=yCONFIG_XDP_SOCKETS_DIAG=mCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_FIB_TRIE_STATS=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE_DEMUX=mCONFIG_NET_IP_TUNNEL=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE_COMMON=yCONFIG_IP_MROUTE=yCONFIG_IP_MROUTE_MULTIPLE_TABLES=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=yCONFIG_SYN_COOKIES=yCONFIG_NET_IPVTI=mCONFIG_NET_UDP_TUNNEL=mCONFIG_NET_FOU=mCONFIG_NET_FOU_IP_TUNNELS=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_ESP_OFFLOAD=mCONFIG_INET_ESPINTCP=yCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_INET_UDP_DIAG=mCONFIG_INET_RAW_DIAG=mCONFIG_INET_DIAG_DESTROY=yCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_NV=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=mCONFIG_TCP_CONG_DCTCP=mCONFIG_TCP_CONG_CDG=mCONFIG_TCP_CONG_BBR=mCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_ESP_OFFLOAD=mCONFIG_INET6_ESPINTCP=yCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=mCONFIG_IPV6_ILA=mCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_IPV6_VTI=mCONFIG_IPV6_SIT=mCONFIG_IPV6_SIT_6RD=yCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_GRE=mCONFIG_IPV6_FOU=mCONFIG_IPV6_FOU_TUNNEL=mCONFIG_IPV6_MULTIPLE_TABLES=yCONFIG_IPV6_SUBTREES=yCONFIG_IPV6_MROUTE=yCONFIG_IPV6_MROUTE_MULTIPLE_TABLES=yCONFIG_IPV6_PIMSM_V2=yCONFIG_IPV6_SEG6_LWTUNNEL=yCONFIG_IPV6_SEG6_HMAC=yCONFIG_IPV6_SEG6_BPF=yCONFIG_IPV6_RPL_LWTUNNEL=yCONFIG_NETLABEL=yCONFIG_MPTCP=yCONFIG_INET_MPTCP_DIAG=mCONFIG_MPTCP_IPV6=yCONFIG_NETWORK_SECMARK=yCONFIG_NET_PTP_CLASSIFY=yCONFIG_NETWORK_PHY_TIMESTAMPING=yCONFIG_NETFILTER=yCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_INGRESS=yCONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_FAMILY_BRIDGE=yCONFIG_NETFILTER_FAMILY_ARP=yCONFIG_NETFILTER_NETLINK_ACCT=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NETFILTER_NETLINK_OSF=mCONFIG_NF_CONNTRACK=mCONFIG_NF_LOG_COMMON=mCONFIG_NF_LOG_NETDEV=mCONFIG_NETFILTER_CONNCOUNT=mCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_ZONES=yCONFIG_NF_CONNTRACK_PROCFS=yCONFIG_NF_CONNTRACK_EVENTS=yCONFIG_NF_CONNTRACK_TIMEOUT=yCONFIG_NF_CONNTRACK_TIMESTAMP=yCONFIG_NF_CONNTRACK_LABELS=yCONFIG_NF_CT_PROTO_DCCP=yCONFIG_NF_CT_PROTO_GRE=yCONFIG_NF_CT_PROTO_SCTP=yCONFIG_NF_CT_PROTO_UDPLITE=yCONFIG_NF_CONNTRACK_AMANDA=mCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=mCONFIG_NF_CONNTRACK_BROADCAST=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_SNMP=mCONFIG_NF_CONNTRACK_PPTP=mCONFIG_NF_CONNTRACK_SANE=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=mCONFIG_NF_CT_NETLINK=mCONFIG_NF_CT_NETLINK_TIMEOUT=mCONFIG_NF_CT_NETLINK_HELPER=mCONFIG_NETFILTER_NETLINK_GLUE_CT=yCONFIG_NF_NAT=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_SIP=mCONFIG_NF_NAT_TFTP=mCONFIG_NF_NAT_REDIRECT=yCONFIG_NF_NAT_MASQUERADE=yCONFIG_NETFILTER_SYNPROXY=mCONFIG_NF_TABLES=mCONFIG_NF_TABLES_INET=yCONFIG_NF_TABLES_NETDEV=yCONFIG_NFT_NUMGEN=mCONFIG_NFT_CT=mCONFIG_NFT_FLOW_OFFLOAD=mCONFIG_NFT_COUNTER=mCONFIG_NFT_CONNLIMIT=mCONFIG_NFT_LOG=mCONFIG_NFT_LIMIT=mCONFIG_NFT_MASQ=mCONFIG_NFT_REDIR=mCONFIG_NFT_NAT=mCONFIG_NFT_TUNNEL=mCONFIG_NFT_OBJREF=mCONFIG_NFT_QUEUE=mCONFIG_NFT_QUOTA=mCONFIG_NFT_REJECT=mCONFIG_NFT_REJECT_INET=mCONFIG_NFT_COMPAT=mCONFIG_NFT_HASH=mCONFIG_NFT_FIB=mCONFIG_NFT_FIB_INET=mCONFIG_NFT_XFRM=mCONFIG_NFT_SOCKET=mCONFIG_NFT_OSF=mCONFIG_NFT_TPROXY=mCONFIG_NFT_SYNPROXY=mCONFIG_NF_DUP_NETDEV=mCONFIG_NFT_DUP_NETDEV=mCONFIG_NFT_FWD_NETDEV=mCONFIG_NFT_FIB_NETDEV=mCONFIG_NFT_REJECT_NETDEV=mCONFIG_NF_FLOW_TABLE_INET=mCONFIG_NF_FLOW_TABLE=mCONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#CONFIG_NETFILTER_XT_MARK=mCONFIG_NETFILTER_XT_CONNMARK=mCONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#CONFIG_NETFILTER_XT_TARGET_AUDIT=mCONFIG_NETFILTER_XT_TARGET_CHECKSUM=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=mCONFIG_NETFILTER_XT_TARGET_CT=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_HL=mCONFIG_NETFILTER_XT_TARGET_HMARK=mCONFIG_NETFILTER_XT_TARGET_IDLETIMER=mCONFIG_NETFILTER_XT_TARGET_LED=mCONFIG_NETFILTER_XT_TARGET_LOG=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_NAT=mCONFIG_NETFILTER_XT_TARGET_NETMAP=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_NOTRACK=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_REDIRECT=mCONFIG_NETFILTER_XT_TARGET_MASQUERADE=mCONFIG_NETFILTER_XT_TARGET_TEE=mCONFIG_NETFILTER_XT_TARGET_TPROXY=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=mCONFIG_NETFILTER_XT_MATCH_BPF=mCONFIG_NETFILTER_XT_MATCH_CGROUP=mCONFIG_NETFILTER_XT_MATCH_CLUSTER=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLABEL=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_CPU=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DEVGROUP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ECN=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_HL=mCONFIG_NETFILTER_XT_MATCH_IPCOMP=mCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_IPVS=mCONFIG_NETFILTER_XT_MATCH_L2TP=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_NFACCT=mCONFIG_NETFILTER_XT_MATCH_OSF=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_RECENT=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_SOCKET=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=mCONFIG_NETFILTER_XT_MATCH_TIME=mCONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration
CONFIG_IP_SET=mCONFIG_IP_SET_MAX=256CONFIG_IP_SET_BITMAP_IP=mCONFIG_IP_SET_BITMAP_IPMAC=mCONFIG_IP_SET_BITMAP_PORT=mCONFIG_IP_SET_HASH_IP=mCONFIG_IP_SET_HASH_IPMARK=mCONFIG_IP_SET_HASH_IPPORT=mCONFIG_IP_SET_HASH_IPPORTIP=mCONFIG_IP_SET_HASH_IPPORTNET=mCONFIG_IP_SET_HASH_IPMAC=mCONFIG_IP_SET_HASH_MAC=mCONFIG_IP_SET_HASH_NETPORTNET=mCONFIG_IP_SET_HASH_NET=mCONFIG_IP_SET_HASH_NETNET=mCONFIG_IP_SET_HASH_NETPORT=mCONFIG_IP_SET_HASH_NETIFACE=mCONFIG_IP_SET_LIST_SET=mCONFIG_IP_VS=mCONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=15
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=yCONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_FO=mCONFIG_IP_VS_OVF=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_MH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=mCONFIG_IP_VS_TWOS=m
#
# IPVS SH scheduler
#CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IP_VS_NFCT=yCONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_SOCKET_IPV4=mCONFIG_NF_TPROXY_IPV4=mCONFIG_NF_TABLES_IPV4=yCONFIG_NFT_REJECT_IPV4=mCONFIG_NFT_DUP_IPV4=mCONFIG_NFT_FIB_IPV4=mCONFIG_NF_TABLES_ARP=yCONFIG_NF_FLOW_TABLE_IPV4=mCONFIG_NF_DUP_IPV4=mCONFIG_NF_LOG_ARP=mCONFIG_NF_LOG_IPV4=mCONFIG_NF_REJECT_IPV4=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_RPFILTER=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_SYNPROXY=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_SECURITY=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#CONFIG_NF_SOCKET_IPV6=mCONFIG_NF_TPROXY_IPV6=mCONFIG_NF_TABLES_IPV6=yCONFIG_NFT_REJECT_IPV6=mCONFIG_NFT_DUP_IPV6=mCONFIG_NFT_FIB_IPV6=mCONFIG_NF_FLOW_TABLE_IPV6=mCONFIG_NF_DUP_IPV6=mCONFIG_NF_REJECT_IPV6=mCONFIG_NF_LOG_IPV6=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_RPFILTER=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_MATCH_SRH=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_TARGET_SYNPROXY=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=mCONFIG_IP6_NF_SECURITY=mCONFIG_IP6_NF_NAT=mCONFIG_IP6_NF_TARGET_MASQUERADE=mCONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=mCONFIG_NF_TABLES_BRIDGE=mCONFIG_NFT_BRIDGE_META=mCONFIG_NFT_BRIDGE_REJECT=mCONFIG_NF_LOG_BRIDGE=mCONFIG_NF_CONNTRACK_BRIDGE=mCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_IP6=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not setCONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not setCONFIG_SCTP_COOKIE_HMAC_MD5=yCONFIG_SCTP_COOKIE_HMAC_SHA1=yCONFIG_INET_SCTP_DIAG=mCONFIG_RDS=mCONFIG_RDS_RDMA=mCONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not setCONFIG_TIPC=mCONFIG_TIPC_MEDIA_IB=yCONFIG_TIPC_MEDIA_UDP=yCONFIG_TIPC_CRYPTO=yCONFIG_TIPC_DIAG=mCONFIG_ATM=mCONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=mCONFIG_ATM_MPOA=mCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_L2TP=mCONFIG_L2TP_DEBUGFS=mCONFIG_L2TP_V3=yCONFIG_L2TP_IP=mCONFIG_L2TP_ETH=mCONFIG_STP=mCONFIG_GARP=mCONFIG_MRP=mCONFIG_BRIDGE=mCONFIG_BRIDGE_IGMP_SNOOPING=yCONFIG_BRIDGE_VLAN_FILTERING=yCONFIG_BRIDGE_MRP=yCONFIG_BRIDGE_CFM=yCONFIG_HAVE_NET_DSA=yCONFIG_NET_DSA=mCONFIG_NET_DSA_TAG_8021Q=mCONFIG_NET_DSA_TAG_AR9331=mCONFIG_NET_DSA_TAG_BRCM_COMMON=mCONFIG_NET_DSA_TAG_BRCM=mCONFIG_NET_DSA_TAG_BRCM_PREPEND=mCONFIG_NET_DSA_TAG_HELLCREEK=mCONFIG_NET_DSA_TAG_GSWIP=mCONFIG_NET_DSA_TAG_DSA_COMMON=mCONFIG_NET_DSA_TAG_DSA=mCONFIG_NET_DSA_TAG_EDSA=mCONFIG_NET_DSA_TAG_MTK=mCONFIG_NET_DSA_TAG_KSZ=mCONFIG_NET_DSA_TAG_RTL4_A=mCONFIG_NET_DSA_TAG_OCELOT=mCONFIG_NET_DSA_TAG_OCELOT_8021Q=mCONFIG_NET_DSA_TAG_QCA=mCONFIG_NET_DSA_TAG_LAN9303=mCONFIG_NET_DSA_TAG_SJA1105=mCONFIG_NET_DSA_TAG_TRAILER=mCONFIG_NET_DSA_TAG_XRS700X=mCONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=yCONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not setCONFIG_LLC=mCONFIG_LLC2=mCONFIG_ATALK=mCONFIG_DEV_APPLETALK=mCONFIG_IPDDP=mCONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not setCONFIG_PHONET=mCONFIG_6LOWPAN=mCONFIG_6LOWPAN_DEBUGFS=yCONFIG_6LOWPAN_NHC=mCONFIG_6LOWPAN_NHC_DEST=mCONFIG_6LOWPAN_NHC_FRAGMENT=mCONFIG_6LOWPAN_NHC_HOP=mCONFIG_6LOWPAN_NHC_IPV6=mCONFIG_6LOWPAN_NHC_MOBILITY=mCONFIG_6LOWPAN_NHC_ROUTING=mCONFIG_6LOWPAN_NHC_UDP=mCONFIG_6LOWPAN_GHC_EXT_HDR_HOP=mCONFIG_6LOWPAN_GHC_UDP=mCONFIG_6LOWPAN_GHC_ICMPV6=mCONFIG_6LOWPAN_GHC_EXT_HDR_DEST=mCONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=mCONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=mCONFIG_IEEE802154=mCONFIG_IEEE802154_NL802154_EXPERIMENTAL=yCONFIG_IEEE802154_SOCKET=mCONFIG_IEEE802154_6LOWPAN=mCONFIG_MAC802154=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFB=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_CBS=mCONFIG_NET_SCH_ETF=mCONFIG_NET_SCH_TAPRIO=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_MQPRIO=mCONFIG_NET_SCH_SKBPRIO=mCONFIG_NET_SCH_CHOKE=mCONFIG_NET_SCH_QFQ=mCONFIG_NET_SCH_CODEL=mCONFIG_NET_SCH_FQ_CODEL=yCONFIG_NET_SCH_CAKE=mCONFIG_NET_SCH_FQ=mCONFIG_NET_SCH_HHF=mCONFIG_NET_SCH_PIE=mCONFIG_NET_SCH_FQ_PIE=mCONFIG_NET_SCH_INGRESS=mCONFIG_NET_SCH_PLUG=mCONFIG_NET_SCH_ETS=mCONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not setCONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not setCONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_FLOW=mCONFIG_NET_CLS_CGROUP=mCONFIG_NET_CLS_BPF=mCONFIG_NET_CLS_FLOWER=mCONFIG_NET_CLS_MATCHALL=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=mCONFIG_NET_EMATCH_CANID=mCONFIG_NET_EMATCH_IPSET=mCONFIG_NET_EMATCH_IPT=mCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_SAMPLE=mCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_NAT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=mCONFIG_NET_ACT_SKBEDIT=mCONFIG_NET_ACT_CSUM=mCONFIG_NET_ACT_MPLS=mCONFIG_NET_ACT_VLAN=mCONFIG_NET_ACT_BPF=mCONFIG_NET_ACT_CONNMARK=mCONFIG_NET_ACT_CTINFO=mCONFIG_NET_ACT_SKBMOD=mCONFIG_NET_ACT_IFE=mCONFIG_NET_ACT_TUNNEL_KEY=mCONFIG_NET_ACT_CT=mCONFIG_NET_ACT_GATE=mCONFIG_NET_IFE_SKBMARK=mCONFIG_NET_IFE_SKBPRIO=mCONFIG_NET_IFE_SKBTCINDEX=mCONFIG_NET_TC_SKB_EXT=yCONFIG_NET_SCH_FIFO=yCONFIG_DCB=yCONFIG_DNS_RESOLVER=mCONFIG_BATMAN_ADV=mCONFIG_BATMAN_ADV_BATMAN_V=yCONFIG_BATMAN_ADV_BLA=yCONFIG_BATMAN_ADV_DAT=yCONFIG_BATMAN_ADV_NC=yCONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not setCONFIG_OPENVSWITCH=mCONFIG_OPENVSWITCH_GRE=mCONFIG_OPENVSWITCH_VXLAN=mCONFIG_OPENVSWITCH_GENEVE=mCONFIG_VSOCKETS=mCONFIG_VSOCKETS_DIAG=mCONFIG_VSOCKETS_LOOPBACK=mCONFIG_VMWARE_VMCI_VSOCKETS=mCONFIG_VIRTIO_VSOCKETS=mCONFIG_VIRTIO_VSOCKETS_COMMON=mCONFIG_HYPERV_VSOCKETS=mCONFIG_NETLINK_DIAG=mCONFIG_MPLS=yCONFIG_NET_MPLS_GSO=mCONFIG_MPLS_ROUTING=mCONFIG_MPLS_IPTUNNEL=mCONFIG_NET_NSH=mCONFIG_HSR=mCONFIG_NET_SWITCHDEV=yCONFIG_NET_L3_MASTER_DEV=yCONFIG_QRTR=mCONFIG_QRTR_SMD=mCONFIG_QRTR_TUN=mCONFIG_QRTR_MHI=mCONFIG_NET_NCSI=yCONFIG_NCSI_OEM_CMD_GET_MAC=yCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_SOCK_RX_QUEUE_MAPPING=yCONFIG_XPS=yCONFIG_CGROUP_NET_PRIO=yCONFIG_CGROUP_NET_CLASSID=yCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=yCONFIG_BPF_JIT=yCONFIG_BPF_STREAM_PARSER=yCONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NET_DROP_MONITOR=y
# end of Network testing # end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=mCONFIG_AX25_DAMA_SLAVE=yCONFIG_NETROM=mCONFIG_ROSE=m
#
# AX.25 network device drivers
#CONFIG_MKISS=mCONFIG_6PACK=mCONFIG_BPQETHER=mCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=mCONFIG_BAYCOM_PAR=mCONFIG_YAM=m
# end of AX.25 network device drivers
CONFIG_CAN=mCONFIG_CAN_RAW=mCONFIG_CAN_BCM=mCONFIG_CAN_GW=mCONFIG_CAN_J1939=mCONFIG_CAN_ISOTP=m
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=mCONFIG_CAN_VXCAN=mCONFIG_CAN_SLCAN=mCONFIG_CAN_DEV=mCONFIG_CAN_CALC_BITTIMING=yCONFIG_CAN_JANZ_ICAN3=mCONFIG_CAN_KVASER_PCIEFD=mCONFIG_CAN_C_CAN=mCONFIG_CAN_C_CAN_PLATFORM=mCONFIG_CAN_C_CAN_PCI=mCONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not setCONFIG_CAN_CC770_PLATFORM=mCONFIG_CAN_IFI_CANFD=mCONFIG_CAN_M_CAN=mCONFIG_CAN_M_CAN_PCI=mCONFIG_CAN_M_CAN_PLATFORM=mCONFIG_CAN_M_CAN_TCAN4X5X=mCONFIG_CAN_PEAK_PCIEFD=mCONFIG_CAN_SJA1000=mCONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_EMS_PCMCIA is not setCONFIG_CAN_F81601=mCONFIG_CAN_KVASER_PCI=mCONFIG_CAN_PEAK_PCI=mCONFIG_CAN_PEAK_PCIEC=yCONFIG_CAN_PEAK_PCMCIA=mCONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not setCONFIG_CAN_SJA1000_PLATFORM=mCONFIG_CAN_SOFTING=mCONFIG_CAN_SOFTING_CS=m
#
# CAN SPI interfaces
#CONFIG_CAN_HI311X=mCONFIG_CAN_MCP251X=mCONFIG_CAN_MCP251XFD=m
# CONFIG_CAN_MCP251XFD_SANITY is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#CONFIG_CAN_8DEV_USB=mCONFIG_CAN_EMS_USB=mCONFIG_CAN_ESD_USB2=mCONFIG_CAN_GS_USB=mCONFIG_CAN_KVASER_USB=mCONFIG_CAN_MCBA_USB=mCONFIG_CAN_PEAK_USB=mCONFIG_CAN_UCAN=m
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers
CONFIG_BT=mCONFIG_BT_BREDR=yCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=mCONFIG_BT_HIDP=m
# CONFIG_BT_HS is not setCONFIG_BT_LE=yCONFIG_BT_6LOWPAN=mCONFIG_BT_LEDS=yCONFIG_BT_MSFTEXT=yCONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#CONFIG_BT_INTEL=mCONFIG_BT_BCM=mCONFIG_BT_RTL=mCONFIG_BT_QCA=mCONFIG_BT_HCIBTUSB=mCONFIG_BT_HCIBTUSB_AUTOSUSPEND=yCONFIG_BT_HCIBTUSB_BCM=yCONFIG_BT_HCIBTUSB_MTK=yCONFIG_BT_HCIBTUSB_RTL=yCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_SERDEV=yCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_NOKIA=mCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_ATH3K=yCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIUART_3WIRE=yCONFIG_BT_HCIUART_INTEL=yCONFIG_BT_HCIUART_BCM=yCONFIG_BT_HCIUART_RTL=yCONFIG_BT_HCIUART_QCA=yCONFIG_BT_HCIUART_AG6XX=yCONFIG_BT_HCIUART_MRVL=yCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIDTL1=mCONFIG_BT_HCIBT3C=mCONFIG_BT_HCIBLUECARD=mCONFIG_BT_HCIVHCI=mCONFIG_BT_MRVL=mCONFIG_BT_MRVL_SDIO=mCONFIG_BT_ATH3K=mCONFIG_BT_MTKSDIO=mCONFIG_BT_MTKUART=mCONFIG_BT_HCIRSI=m
# end of Bluetooth device drivers
CONFIG_AF_RXRPC=mCONFIG_AF_RXRPC_IPV6=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not setCONFIG_AF_RXRPC_DEBUG=yCONFIG_RXKAD=yCONFIG_AF_KCM=mCONFIG_STREAM_PARSER=yCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=yCONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not setCONFIG_CFG80211_REQUIRE_SIGNED_REGDB=yCONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=yCONFIG_CFG80211_DEFAULT_PS=yCONFIG_CFG80211_DEBUGFS=yCONFIG_CFG80211_CRDA_SUPPORT=yCONFIG_CFG80211_WEXT=yCONFIG_CFG80211_WEXT_EXPORT=yCONFIG_LIB80211=mCONFIG_LIB80211_CRYPT_WEP=mCONFIG_LIB80211_CRYPT_CCMP=mCONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=mCONFIG_MAC80211_HAS_RC=yCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel_ht"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=yCONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_MAC80211_STA_HASH_MAX_SIZE=0CONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=yCONFIG_RFKILL_GPIO=mCONFIG_NET_9P=mCONFIG_NET_9P_VIRTIO=mCONFIG_NET_9P_XEN=mCONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not setCONFIG_CEPH_LIB=mCONFIG_CEPH_LIB_PRETTYDEBUG=yCONFIG_CEPH_LIB_USE_DNS_RESOLVER=yCONFIG_NFC=mCONFIG_NFC_DIGITAL=mCONFIG_NFC_NCI=mCONFIG_NFC_NCI_SPI=mCONFIG_NFC_NCI_UART=mCONFIG_NFC_HCI=mCONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#CONFIG_NFC_TRF7970A=mCONFIG_NFC_MEI_PHY=mCONFIG_NFC_SIM=mCONFIG_NFC_PORT100=mCONFIG_NFC_VIRTUAL_NCI=mCONFIG_NFC_FDP=mCONFIG_NFC_FDP_I2C=mCONFIG_NFC_PN544=mCONFIG_NFC_PN544_I2C=mCONFIG_NFC_PN544_MEI=mCONFIG_NFC_PN533=mCONFIG_NFC_PN533_USB=mCONFIG_NFC_PN533_I2C=mCONFIG_NFC_PN532_UART=mCONFIG_NFC_MICROREAD=mCONFIG_NFC_MICROREAD_I2C=mCONFIG_NFC_MICROREAD_MEI=mCONFIG_NFC_MRVL=mCONFIG_NFC_MRVL_USB=mCONFIG_NFC_MRVL_UART=mCONFIG_NFC_MRVL_I2C=mCONFIG_NFC_MRVL_SPI=mCONFIG_NFC_ST21NFCA=mCONFIG_NFC_ST21NFCA_I2C=mCONFIG_NFC_ST_NCI=mCONFIG_NFC_ST_NCI_I2C=mCONFIG_NFC_ST_NCI_SPI=mCONFIG_NFC_NXP_NCI=mCONFIG_NFC_NXP_NCI_I2C=mCONFIG_NFC_S3FWRN5=mCONFIG_NFC_S3FWRN5_I2C=mCONFIG_NFC_S3FWRN82_UART=mCONFIG_NFC_ST95HF=m
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=mCONFIG_NET_IFE=mCONFIG_LWTUNNEL=yCONFIG_LWTUNNEL_BPF=yCONFIG_DST_CACHE=yCONFIG_GRO_CELLS=yCONFIG_SOCK_VALIDATE_XMIT=yCONFIG_NET_SOCK_MSG=yCONFIG_NET_DEVLINK=yCONFIG_PAGE_POOL=yCONFIG_FAILOVER=mCONFIG_ETHTOOL_NETLINK=yCONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#CONFIG_HAVE_EISA=y
# CONFIG_EISA is not setCONFIG_HAVE_PCI=yCONFIG_PCI=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=yCONFIG_PCIEAER_INJECT=mCONFIG_PCIE_ECRC=yCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not setCONFIG_PCIE_PME=yCONFIG_PCIE_DPC=yCONFIG_PCIE_PTM=yCONFIG_PCIE_EDR=yCONFIG_PCI_MSI=yCONFIG_PCI_MSI_IRQ_DOMAIN=yCONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not setCONFIG_PCI_STUB=yCONFIG_PCI_PF_STUB=mCONFIG_XEN_PCIDEV_FRONTEND=mCONFIG_PCI_ATS=yCONFIG_PCI_LOCKLESS_CONFIG=yCONFIG_PCI_IOV=yCONFIG_PCI_PRI=yCONFIG_PCI_PASID=yCONFIG_PCI_P2PDMA=yCONFIG_PCI_LABEL=yCONFIG_PCI_HYPERV=mCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_ACPI=yCONFIG_HOTPLUG_PCI_ACPI_IBM=mCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=mCONFIG_HOTPLUG_PCI_CPCI_GENERIC=mCONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#CONFIG_VMD=mCONFIG_PCI_HYPERV_INTERFACE=m
#
# DesignWare PCI Core Support
#CONFIG_PCIE_DW=yCONFIG_PCIE_DW_HOST=yCONFIG_PCIE_DW_PLAT=yCONFIG_PCIE_DW_PLAT_HOST=yCONFIG_PCI_MESON=y
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support # end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers
CONFIG_CXL_BUS=mCONFIG_CXL_MEM=m
# CONFIG_CXL_MEM_RAW_COMMANDS is not setCONFIG_PCCARD=mCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=mCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=mCONFIG_I82092=mCONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not setCONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#CONFIG_FW_LOADER=yCONFIG_FW_LOADER_PAGED_BUF=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not setCONFIG_FW_LOADER_COMPRESS=yCONFIG_FW_CACHE=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=yCONFIG_ALLOW_DEV_COREDUMP=yCONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not setCONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not setCONFIG_SYS_HYPERVISOR=yCONFIG_GENERIC_CPU_AUTOPROBE=yCONFIG_GENERIC_CPU_VULNERABILITIES=yCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_SLIMBUS=mCONFIG_REGMAP_SPI=yCONFIG_REGMAP_W1=mCONFIG_REGMAP_MMIO=yCONFIG_REGMAP_IRQ=yCONFIG_REGMAP_SOUNDWIRE=mCONFIG_REGMAP_SCCB=mCONFIG_REGMAP_SPI_AVMM=mCONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#CONFIG_MHI_BUS=m
# CONFIG_MHI_BUS_DEBUG is not setCONFIG_MHI_BUS_PCI_GENERIC=m
# end of Bus devices
CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_GNSS=mCONFIG_GNSS_SERIAL=mCONFIG_GNSS_MTK_SERIAL=mCONFIG_GNSS_SIRF_SERIAL=mCONFIG_GNSS_UBX_SERIAL=mCONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#CONFIG_MTD_BLKDEVS=mCONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not setCONFIG_MTD_PSTORE=m
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=yCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=yCONFIG_MTD_RAM=mCONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_INTEL_VR_NOR is not setCONFIG_MTD_PLATRAM=m
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not setCONFIG_MTD_PHRAM=m
# CONFIG_MTD_MTDRAM is not setCONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
#
# NAND
#CONFIG_MTD_NAND_CORE=m
# CONFIG_MTD_ONENAND is not setCONFIG_MTD_RAW_NAND=m
#
# Raw/parallel NAND flash controllers
#
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_MXIC is not set
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_ARASAN is not set
#
# Misc
#CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_SPI_NAND is not set
#
# ECC engine support
#CONFIG_MTD_NAND_ECC=yCONFIG_MTD_NAND_ECC_SW_HAMMING=yCONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=yCONFIG_MTD_NAND_ECC_SW_BCH=y
# end of ECC engine support # end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_SPI_NOR=mCONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not setCONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not setCONFIG_SPI_INTEL_SPI=mCONFIG_SPI_INTEL_SPI_PCI=mCONFIG_SPI_INTEL_SPI_PLATFORM=mCONFIG_MTD_UBI=mCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not setCONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=yCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=mCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=yCONFIG_PARPORT_PC_PCMCIA=mCONFIG_PARPORT_AX88796=mCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_NULL_BLK=mCONFIG_BLK_DEV_FD=mCONFIG_CDROM=m
# CONFIG_PARIDE is not setCONFIG_BLK_DEV_PCIESSD_MTIP32XX=mCONFIG_ZRAM=mCONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_842 is not setCONFIG_ZRAM_DEF_COMP="lzo-rle"CONFIG_ZRAM_WRITEBACK=y
# CONFIG_ZRAM_MEMORY_TRACKING is not setCONFIG_BLK_DEV_UMEM=mCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_LOOP_MIN_COUNT=0CONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not setCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384CONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not setCONFIG_ATA_OVER_ETH=mCONFIG_XEN_BLKDEV_FRONTEND=mCONFIG_XEN_BLKDEV_BACKEND=mCONFIG_VIRTIO_BLK=mCONFIG_BLK_DEV_RBD=mCONFIG_BLK_DEV_RSXX=mCONFIG_BLK_DEV_RNBD=yCONFIG_BLK_DEV_RNBD_CLIENT=mCONFIG_BLK_DEV_RNBD_SERVER=m
#
# NVME Support
#CONFIG_NVME_CORE=yCONFIG_BLK_DEV_NVME=yCONFIG_NVME_MULTIPATH=yCONFIG_NVME_HWMON=yCONFIG_NVME_FABRICS=mCONFIG_NVME_RDMA=mCONFIG_NVME_FC=mCONFIG_NVME_TCP=mCONFIG_NVME_TARGET=mCONFIG_NVME_TARGET_PASSTHRU=yCONFIG_NVME_TARGET_LOOP=mCONFIG_NVME_TARGET_RDMA=mCONFIG_NVME_TARGET_FC=mCONFIG_NVME_TARGET_FCLOOP=mCONFIG_NVME_TARGET_TCP=m
# end of NVME Support
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=mCONFIG_AD525X_DPOT=mCONFIG_AD525X_DPOT_I2C=mCONFIG_AD525X_DPOT_SPI=m
# CONFIG_DUMMY_IRQ is not setCONFIG_IBM_ASM=mCONFIG_PHANTOM=mCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=mCONFIG_ICS932S401=mCONFIG_ENCLOSURE_SERVICES=mCONFIG_HP_ILO=mCONFIG_APDS9802ALS=mCONFIG_ISL29003=mCONFIG_ISL29020=mCONFIG_SENSORS_TSL2550=mCONFIG_SENSORS_BH1770=mCONFIG_SENSORS_APDS990X=mCONFIG_HMC6352=mCONFIG_DS1682=mCONFIG_VMWARE_BALLOON=mCONFIG_LATTICE_ECP3_CONFIG=m
# CONFIG_SRAM is not setCONFIG_PCI_ENDPOINT_TEST=mCONFIG_XILINX_SDFEC=mCONFIG_MISC_RTSX=mCONFIG_PVPANIC=mCONFIG_C2PORT=mCONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not setCONFIG_EEPROM_LEGACY=mCONFIG_EEPROM_MAX6875=mCONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not setCONFIG_EEPROM_IDT_89HPESX=mCONFIG_EEPROM_EE1004=m
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #CONFIG_TI_ST=m
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=mCONFIG_ALTERA_STAPL=mCONFIG_INTEL_MEI=mCONFIG_INTEL_MEI_ME=mCONFIG_INTEL_MEI_TXE=mCONFIG_INTEL_MEI_HDCP=mCONFIG_VMWARE_VMCI=mCONFIG_GENWQE=mCONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0CONFIG_ECHO=mCONFIG_BCM_VK=mCONFIG_BCM_VK_TTY=yCONFIG_MISC_ALCOR_PCI=mCONFIG_MISC_RTSX_PCI=mCONFIG_MISC_RTSX_USB=mCONFIG_HABANA_AI=mCONFIG_UACCE=m
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=mCONFIG_BLK_DEV_SR=mCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_ENCLOSURE=mCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=mCONFIG_ISCSI_BOOT_SYSFS=mCONFIG_SCSI_CXGB3_ISCSI=mCONFIG_SCSI_CXGB4_ISCSI=mCONFIG_SCSI_BNX2_ISCSI=mCONFIG_SCSI_BNX2X_FCOE=mCONFIG_BE2ISCSI=mCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_HPSA=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_3W_SAS=mCONFIG_SCSI_ACARD=mCONFIG_SCSI_AACRAID=mCONFIG_SCSI_AIC7XXX=mCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=15000CONFIG_AIC7XXX_DEBUG_ENABLE=yCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=15000CONFIG_AIC79XX_DEBUG_ENABLE=yCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC94XX=mCONFIG_AIC94XX_DEBUG=yCONFIG_SCSI_MVSAS=mCONFIG_SCSI_MVSAS_DEBUG=yCONFIG_SCSI_MVSAS_TASKLET=yCONFIG_SCSI_MVUMI=mCONFIG_SCSI_DPT_I2O=mCONFIG_SCSI_ADVANSYS=mCONFIG_SCSI_ARCMSR=mCONFIG_SCSI_ESAS2R=mCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=mCONFIG_MEGARAID_MAILBOX=mCONFIG_MEGARAID_LEGACY=mCONFIG_MEGARAID_SAS=mCONFIG_SCSI_MPT3SAS=mCONFIG_SCSI_MPT2SAS_MAX_SGE=128CONFIG_SCSI_MPT3SAS_MAX_SGE=128CONFIG_SCSI_MPT2SAS=mCONFIG_SCSI_SMARTPQI=mCONFIG_SCSI_UFSHCD=mCONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not setCONFIG_SCSI_UFSHCD_PLATFORM=mCONFIG_SCSI_UFS_CDNS_PLATFORM=m
# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not setCONFIG_SCSI_UFS_BSG=yCONFIG_SCSI_UFS_CRYPTO=yCONFIG_SCSI_HPTIOP=mCONFIG_SCSI_BUSLOGIC=mCONFIG_SCSI_FLASHPOINT=yCONFIG_SCSI_MYRB=mCONFIG_SCSI_MYRS=mCONFIG_VMWARE_PVSCSI=mCONFIG_XEN_SCSI_FRONTEND=mCONFIG_HYPERV_STORAGE=mCONFIG_LIBFC=mCONFIG_LIBFCOE=mCONFIG_FCOE=mCONFIG_FCOE_FNIC=mCONFIG_SCSI_SNIC=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not setCONFIG_SCSI_DMX3191D=mCONFIG_SCSI_FDOMAIN=mCONFIG_SCSI_FDOMAIN_PCI=mCONFIG_SCSI_ISCI=mCONFIG_SCSI_IPS=mCONFIG_SCSI_INITIO=mCONFIG_SCSI_INIA100=mCONFIG_SCSI_PPA=mCONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not setCONFIG_SCSI_STEX=mCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=mCONFIG_SCSI_IPR_TRACE=yCONFIG_SCSI_IPR_DUMP=yCONFIG_SCSI_QLOGIC_1280=mCONFIG_SCSI_QLA_FC=mCONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not setCONFIG_SCSI_QLA_ISCSI=mCONFIG_QEDI=mCONFIG_QEDF=mCONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=mCONFIG_SCSI_AM53C974=mCONFIG_SCSI_WD719X=mCONFIG_SCSI_DEBUG=mCONFIG_SCSI_PMCRAID=mCONFIG_SCSI_PM8001=mCONFIG_SCSI_BFA_FC=mCONFIG_SCSI_VIRTIO=mCONFIG_SCSI_CHELSIO_FCOE=mCONFIG_SCSI_LOWLEVEL_PCMCIA=yCONFIG_PCMCIA_AHA152X=mCONFIG_PCMCIA_FDOMAIN=mCONFIG_PCMCIA_QLOGIC=mCONFIG_PCMCIA_SYM53C500=mCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=mCONFIG_SCSI_DH_HP_SW=mCONFIG_SCSI_DH_EMC=mCONFIG_SCSI_DH_ALUA=m
# end of SCSI device support
CONFIG_ATA=yCONFIG_SATA_HOST=yCONFIG_PATA_TIMINGS=yCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_FORCE=yCONFIG_ATA_ACPI=yCONFIG_SATA_ZPODD=yCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=yCONFIG_SATA_MOBILE_LPM_POLICY=3CONFIG_SATA_AHCI_PLATFORM=mCONFIG_SATA_INIC162X=mCONFIG_SATA_ACARD_AHCI=mCONFIG_SATA_SIL24=mCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#CONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=mCONFIG_SATA_SX4=mCONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#CONFIG_ATA_PIIX=mCONFIG_SATA_DWC=m
# CONFIG_SATA_DWC_OLD_DMA is not set
# CONFIG_SATA_DWC_DEBUG is not setCONFIG_SATA_MV=mCONFIG_SATA_NV=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SIL=mCONFIG_SATA_SIS=mCONFIG_SATA_SVW=mCONFIG_SATA_ULI=mCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#CONFIG_PATA_ALI=mCONFIG_PATA_AMD=mCONFIG_PATA_ARTOP=mCONFIG_PATA_ATIIXP=mCONFIG_PATA_ATP867X=mCONFIG_PATA_CMD64X=mCONFIG_PATA_CYPRESS=mCONFIG_PATA_EFAR=mCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=mCONFIG_PATA_HPT3X2N=mCONFIG_PATA_HPT3X3=mCONFIG_PATA_HPT3X3_DMA=yCONFIG_PATA_IT8213=mCONFIG_PATA_IT821X=mCONFIG_PATA_JMICRON=mCONFIG_PATA_MARVELL=mCONFIG_PATA_NETCELL=mCONFIG_PATA_NINJA32=mCONFIG_PATA_NS87415=mCONFIG_PATA_OLDPIIX=mCONFIG_PATA_OPTIDMA=mCONFIG_PATA_PDC2027X=mCONFIG_PATA_PDC_OLD=mCONFIG_PATA_RADISYS=mCONFIG_PATA_RDC=mCONFIG_PATA_SCH=mCONFIG_PATA_SERVERWORKS=mCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=mCONFIG_PATA_TOSHIBA=mCONFIG_PATA_TRIFLEX=mCONFIG_PATA_VIA=mCONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#CONFIG_PATA_CMD640_PCI=mCONFIG_PATA_MPIIX=mCONFIG_PATA_NS87410=mCONFIG_PATA_OPTI=mCONFIG_PATA_PCMCIA=mCONFIG_PATA_RZ1000=m
#
# Generic fallback / legacy drivers
#CONFIG_PATA_ACPI=mCONFIG_ATA_GENERIC=mCONFIG_PATA_LEGACY=mCONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_MD_CLUSTER=mCONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set CONFIG_BCACHE_ASYNC_REGISTRATION=y CONFIG_BLK_DEV_DM_BUILTIN=yCONFIG_BLK_DEV_DM=mCONFIG_DM_DEBUG=yCONFIG_DM_BUFIO=m CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set CONFIG_DM_BIO_PRISON=mCONFIG_DM_PERSISTENT_DATA=mCONFIG_DM_UNSTRIPED=mCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_THIN_PROVISIONING=mCONFIG_DM_CACHE=mCONFIG_DM_CACHE_SMQ=mCONFIG_DM_WRITECACHE=mCONFIG_DM_EBS=mCONFIG_DM_ERA=mCONFIG_DM_CLONE=mCONFIG_DM_MIRROR=mCONFIG_DM_LOG_USERSPACE=mCONFIG_DM_RAID=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_QL=mCONFIG_DM_MULTIPATH_ST=mCONFIG_DM_MULTIPATH_HST=mCONFIG_DM_MULTIPATH_IOA=mCONFIG_DM_DELAY=mCONFIG_DM_DUST=mCONFIG_DM_UEVENT=yCONFIG_DM_FLAKEY=mCONFIG_DM_VERITY=m CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING is not set CONFIG_DM_VERITY_FEC=yCONFIG_DM_SWITCH=mCONFIG_DM_LOG_WRITES=mCONFIG_DM_INTEGRITY=mCONFIG_DM_ZONED=mCONFIG_TARGET_CORE=mCONFIG_TCM_IBLOCK=mCONFIG_TCM_FILEIO=mCONFIG_TCM_PSCSI=mCONFIG_TCM_USER2=mCONFIG_LOOPBACK_TARGET=mCONFIG_TCM_FC=mCONFIG_ISCSI_TARGET=mCONFIG_ISCSI_TARGET_CXGB4=mCONFIG_SBP_TARGET=mCONFIG_FUSION=yCONFIG_FUSION_SPI=mCONFIG_FUSION_FC=mCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=mCONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=mCONFIG_FIREWIRE_OHCI=mCONFIG_FIREWIRE_SBP2=mCONFIG_FIREWIRE_NET=mCONFIG_FIREWIRE_NOSY=m
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=mCONFIG_NETDEVICES=yCONFIG_MII=mCONFIG_NET_CORE=yCONFIG_BONDING=mCONFIG_DUMMY=mCONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not setCONFIG_EQUALIZER=mCONFIG_NET_FC=yCONFIG_IFB=mCONFIG_NET_TEAM=mCONFIG_NET_TEAM_MODE_BROADCAST=mCONFIG_NET_TEAM_MODE_ROUNDROBIN=mCONFIG_NET_TEAM_MODE_RANDOM=mCONFIG_NET_TEAM_MODE_ACTIVEBACKUP=mCONFIG_NET_TEAM_MODE_LOADBALANCE=mCONFIG_MACVLAN=mCONFIG_MACVTAP=mCONFIG_IPVLAN_L3S=yCONFIG_IPVLAN=mCONFIG_IPVTAP=mCONFIG_VXLAN=mCONFIG_GENEVE=mCONFIG_BAREUDP=mCONFIG_GTP=mCONFIG_MACSEC=mCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_NTB_NETDEV=mCONFIG_TUN=mCONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not setCONFIG_VETH=mCONFIG_VIRTIO_NET=mCONFIG_NLMON=mCONFIG_NET_VRF=mCONFIG_VSOCKMON=mCONFIG_MHI_NET=mCONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not setCONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not setCONFIG_ATM_TCP=mCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=mCONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not setCONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not setCONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not setCONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not setCONFIG_ATM_FORE200E=mCONFIG_ATM_FORE200E_USE_TASKLET=yCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_HE=mCONFIG_ATM_HE_USE_SUNI=yCONFIG_ATM_SOLOS=m
#
# Distributed Switch Architecture drivers
#CONFIG_B53=mCONFIG_B53_SPI_DRIVER=mCONFIG_B53_MDIO_DRIVER=mCONFIG_B53_MMAP_DRIVER=mCONFIG_B53_SRAB_DRIVER=mCONFIG_B53_SERDES=mCONFIG_NET_DSA_BCM_SF2=mCONFIG_NET_DSA_LOOP=mCONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=m
# CONFIG_NET_DSA_LANTIQ_GSWIP is not setCONFIG_NET_DSA_MT7530=mCONFIG_NET_DSA_MV88E6060=mCONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=mCONFIG_NET_DSA_MICROCHIP_KSZ9477=mCONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=mCONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=mCONFIG_NET_DSA_MICROCHIP_KSZ8795=mCONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI=mCONFIG_NET_DSA_MV88E6XXX=mCONFIG_NET_DSA_MV88E6XXX_PTP=yCONFIG_NET_DSA_MSCC_SEVILLE=mCONFIG_NET_DSA_AR9331=mCONFIG_NET_DSA_SJA1105=mCONFIG_NET_DSA_SJA1105_PTP=yCONFIG_NET_DSA_SJA1105_TAS=yCONFIG_NET_DSA_SJA1105_VL=yCONFIG_NET_DSA_XRS700X=mCONFIG_NET_DSA_XRS700X_I2C=mCONFIG_NET_DSA_XRS700X_MDIO=mCONFIG_NET_DSA_QCA8K=mCONFIG_NET_DSA_REALTEK_SMI=mCONFIG_NET_DSA_SMSC_LAN9303=mCONFIG_NET_DSA_SMSC_LAN9303_I2C=mCONFIG_NET_DSA_SMSC_LAN9303_MDIO=mCONFIG_NET_DSA_VITESSE_VSC73XX=mCONFIG_NET_DSA_VITESSE_VSC73XX_SPI=mCONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=yCONFIG_MDIO=mCONFIG_NET_VENDOR_3COM=yCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_3C589=mCONFIG_VORTEX=mCONFIG_TYPHOON=mCONFIG_NET_VENDOR_ADAPTEC=yCONFIG_ADAPTEC_STARFIRE=mCONFIG_NET_VENDOR_AGERE=yCONFIG_ET131X=mCONFIG_NET_VENDOR_ALACRITECH=yCONFIG_SLICOSS=mCONFIG_NET_VENDOR_ALTEON=yCONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not setCONFIG_ALTERA_TSE=mCONFIG_NET_VENDOR_AMAZON=yCONFIG_ENA_ETHERNET=mCONFIG_NET_VENDOR_AMD=yCONFIG_AMD8111_ETH=mCONFIG_PCNET32=mCONFIG_PCMCIA_NMCLAN=mCONFIG_AMD_XGBE=mCONFIG_AMD_XGBE_DCB=yCONFIG_AMD_XGBE_HAVE_ECC=yCONFIG_NET_VENDOR_AQUANTIA=yCONFIG_AQTION=mCONFIG_NET_VENDOR_ARC=yCONFIG_NET_VENDOR_ATHEROS=yCONFIG_ATL2=mCONFIG_ATL1=mCONFIG_ATL1E=mCONFIG_ATL1C=mCONFIG_ALX=mCONFIG_NET_VENDOR_BROADCOM=yCONFIG_B44=mCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=yCONFIG_BCMGENET=mCONFIG_BNX2=mCONFIG_CNIC=mCONFIG_TIGON3=mCONFIG_TIGON3_HWMON=yCONFIG_BNX2X=mCONFIG_BNX2X_SRIOV=yCONFIG_SYSTEMPORT=mCONFIG_BNXT=mCONFIG_BNXT_SRIOV=yCONFIG_BNXT_FLOWER_OFFLOAD=yCONFIG_BNXT_DCB=yCONFIG_BNXT_HWMON=yCONFIG_NET_VENDOR_BROCADE=yCONFIG_BNA=mCONFIG_NET_VENDOR_CADENCE=yCONFIG_MACB=mCONFIG_MACB_USE_HWSTAMP=yCONFIG_MACB_PCI=mCONFIG_NET_VENDOR_CAVIUM=yCONFIG_THUNDER_NIC_PF=mCONFIG_THUNDER_NIC_VF=mCONFIG_THUNDER_NIC_BGX=mCONFIG_THUNDER_NIC_RGX=mCONFIG_CAVIUM_PTP=mCONFIG_LIQUIDIO=mCONFIG_LIQUIDIO_VF=mCONFIG_NET_VENDOR_CHELSIO=yCONFIG_CHELSIO_T1=mCONFIG_CHELSIO_T1_1G=yCONFIG_CHELSIO_T3=mCONFIG_CHELSIO_T4=mCONFIG_CHELSIO_T4_DCB=yCONFIG_CHELSIO_T4_FCOE=yCONFIG_CHELSIO_T4VF=mCONFIG_CHELSIO_LIB=mCONFIG_CHELSIO_INLINE_CRYPTO=yCONFIG_CHELSIO_IPSEC_INLINE=mCONFIG_CHELSIO_TLS_DEVICE=mCONFIG_NET_VENDOR_CISCO=yCONFIG_ENIC=mCONFIG_NET_VENDOR_CORTINA=yCONFIG_CX_ECAT=mCONFIG_DNET=mCONFIG_NET_VENDOR_DEC=yCONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_DE2104X_DSL=0CONFIG_TULIP=mCONFIG_TULIP_MWI=yCONFIG_TULIP_MMIO=yCONFIG_TULIP_NAPI=yCONFIG_TULIP_NAPI_HW_MITIGATION=yCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_PCMCIA_XIRCOM=mCONFIG_NET_VENDOR_DLINK=yCONFIG_DL2K=mCONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not setCONFIG_NET_VENDOR_EMULEX=yCONFIG_BE2NET=mCONFIG_BE2NET_HWMON=yCONFIG_BE2NET_BE2=yCONFIG_BE2NET_BE3=yCONFIG_BE2NET_LANCER=yCONFIG_BE2NET_SKYHAWK=yCONFIG_NET_VENDOR_EZCHIP=yCONFIG_NET_VENDOR_FUJITSU=yCONFIG_PCMCIA_FMVJ18X=mCONFIG_NET_VENDOR_GOOGLE=yCONFIG_GVE=mCONFIG_NET_VENDOR_HUAWEI=yCONFIG_HINIC=mCONFIG_NET_VENDOR_I825XX=yCONFIG_NET_VENDOR_INTEL=yCONFIG_E100=mCONFIG_E1000=mCONFIG_E1000E=mCONFIG_E1000E_HWTS=yCONFIG_IGB=mCONFIG_IGB_HWMON=yCONFIG_IGB_DCA=yCONFIG_IGBVF=mCONFIG_IXGB=mCONFIG_IXGBE=mCONFIG_IXGBE_HWMON=yCONFIG_IXGBE_DCA=yCONFIG_IXGBE_DCB=y
# CONFIG_IXGBE_IPSEC is not setCONFIG_IXGBEVF=mCONFIG_IXGBEVF_IPSEC=yCONFIG_I40E=mCONFIG_I40E_DCB=yCONFIG_IAVF=mCONFIG_I40EVF=mCONFIG_ICE=mCONFIG_FM10K=mCONFIG_IGC=mCONFIG_JME=mCONFIG_NET_VENDOR_MARVELL=yCONFIG_MVMDIO=mCONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not setCONFIG_SKGE_GENESIS=yCONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not setCONFIG_PRESTERA=mCONFIG_PRESTERA_PCI=mCONFIG_NET_VENDOR_MELLANOX=yCONFIG_MLX4_EN=mCONFIG_MLX4_EN_DCB=yCONFIG_MLX4_CORE=mCONFIG_MLX4_DEBUG=yCONFIG_MLX4_CORE_GEN2=yCONFIG_MLX5_CORE=mCONFIG_MLX5_ACCEL=yCONFIG_MLX5_FPGA=yCONFIG_MLX5_CORE_EN=yCONFIG_MLX5_EN_ARFS=yCONFIG_MLX5_EN_RXNFC=yCONFIG_MLX5_MPFS=yCONFIG_MLX5_ESWITCH=yCONFIG_MLX5_CLS_ACT=yCONFIG_MLX5_TC_CT=yCONFIG_MLX5_CORE_EN_DCB=yCONFIG_MLX5_CORE_IPOIB=yCONFIG_MLX5_FPGA_IPSEC=yCONFIG_MLX5_IPSEC=yCONFIG_MLX5_EN_IPSEC=yCONFIG_MLX5_FPGA_TLS=yCONFIG_MLX5_TLS=yCONFIG_MLX5_EN_TLS=yCONFIG_MLX5_SW_STEERING=yCONFIG_MLX5_SF=yCONFIG_MLX5_SF_MANAGER=yCONFIG_MLXSW_CORE=mCONFIG_MLXSW_CORE_HWMON=yCONFIG_MLXSW_CORE_THERMAL=yCONFIG_MLXSW_PCI=mCONFIG_MLXSW_I2C=mCONFIG_MLXSW_SWITCHIB=mCONFIG_MLXSW_SWITCHX2=mCONFIG_MLXSW_SPECTRUM=mCONFIG_MLXSW_SPECTRUM_DCB=yCONFIG_MLXSW_MINIMAL=mCONFIG_MLXFW=mCONFIG_NET_VENDOR_MICREL=yCONFIG_KS8842=mCONFIG_KS8851=mCONFIG_KS8851_MLL=mCONFIG_KSZ884X_PCI=mCONFIG_NET_VENDOR_MICROCHIP=yCONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not setCONFIG_ENCX24J600=mCONFIG_LAN743X=mCONFIG_NET_VENDOR_MICROSEMI=yCONFIG_MSCC_OCELOT_SWITCH_LIB=mCONFIG_NET_VENDOR_MYRI=yCONFIG_MYRI10GE=mCONFIG_MYRI10GE_DCA=yCONFIG_FEALNX=mCONFIG_NET_VENDOR_NATSEMI=yCONFIG_NATSEMI=mCONFIG_NS83820=mCONFIG_NET_VENDOR_NETERION=yCONFIG_S2IO=mCONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not setCONFIG_NET_VENDOR_NETRONOME=yCONFIG_NFP=mCONFIG_NFP_APP_FLOWER=yCONFIG_NFP_APP_ABM_NIC=y
# CONFIG_NFP_DEBUG is not setCONFIG_NET_VENDOR_NI=yCONFIG_NI_XGE_MANAGEMENT_ENET=mCONFIG_NET_VENDOR_8390=yCONFIG_PCMCIA_AXNET=mCONFIG_NE2K_PCI=mCONFIG_PCMCIA_PCNET=mCONFIG_NET_VENDOR_NVIDIA=yCONFIG_FORCEDETH=mCONFIG_NET_VENDOR_OKI=yCONFIG_ETHOC=mCONFIG_NET_VENDOR_PACKET_ENGINES=yCONFIG_HAMACHI=mCONFIG_YELLOWFIN=mCONFIG_NET_VENDOR_PENSANDO=yCONFIG_IONIC=mCONFIG_NET_VENDOR_QLOGIC=yCONFIG_QLA3XXX=mCONFIG_QLCNIC=mCONFIG_QLCNIC_SRIOV=yCONFIG_QLCNIC_DCB=yCONFIG_QLCNIC_HWMON=yCONFIG_NETXEN_NIC=mCONFIG_QED=mCONFIG_QED_LL2=yCONFIG_QED_SRIOV=yCONFIG_QEDE=mCONFIG_QED_RDMA=yCONFIG_QED_ISCSI=yCONFIG_QED_FCOE=yCONFIG_QED_OOO=yCONFIG_NET_VENDOR_QUALCOMM=yCONFIG_QCOM_EMAC=mCONFIG_RMNET=mCONFIG_NET_VENDOR_RDC=yCONFIG_R6040=mCONFIG_NET_VENDOR_REALTEK=yCONFIG_ATP=mCONFIG_8139CP=mCONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not setCONFIG_8139TOO_TUNE_TWISTER=yCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_R8169=mCONFIG_NET_VENDOR_RENESAS=yCONFIG_NET_VENDOR_ROCKER=yCONFIG_ROCKER=mCONFIG_NET_VENDOR_SAMSUNG=yCONFIG_SXGBE_ETH=mCONFIG_NET_VENDOR_SEEQ=yCONFIG_NET_VENDOR_SOLARFLARE=yCONFIG_SFC=mCONFIG_SFC_MTD=yCONFIG_SFC_MCDI_MON=yCONFIG_SFC_SRIOV=yCONFIG_SFC_MCDI_LOGGING=yCONFIG_SFC_FALCON=mCONFIG_SFC_FALCON_MTD=yCONFIG_NET_VENDOR_SILAN=yCONFIG_SC92031=mCONFIG_NET_VENDOR_SIS=yCONFIG_SIS900=mCONFIG_SIS190=mCONFIG_NET_VENDOR_SMSC=yCONFIG_PCMCIA_SMC91C92=mCONFIG_EPIC100=mCONFIG_SMSC911X=mCONFIG_SMSC9420=mCONFIG_NET_VENDOR_SOCIONEXT=yCONFIG_NET_VENDOR_STMICRO=yCONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_SELFTESTS is not setCONFIG_STMMAC_PLATFORM=mCONFIG_DWMAC_GENERIC=mCONFIG_DWMAC_INTEL=mCONFIG_STMMAC_PCI=mCONFIG_NET_VENDOR_SUN=yCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=mCONFIG_CASSINI=mCONFIG_NIU=mCONFIG_NET_VENDOR_SYNOPSYS=yCONFIG_DWC_XLGMAC=mCONFIG_DWC_XLGMAC_PCI=mCONFIG_NET_VENDOR_TEHUTI=yCONFIG_TEHUTI=mCONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not setCONFIG_TLAN=mCONFIG_NET_VENDOR_VIA=yCONFIG_VIA_RHINE=mCONFIG_VIA_RHINE_MMIO=yCONFIG_VIA_VELOCITY=mCONFIG_NET_VENDOR_WIZNET=yCONFIG_WIZNET_W5100=mCONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not setCONFIG_WIZNET_BUS_ANY=yCONFIG_WIZNET_W5100_SPI=mCONFIG_NET_VENDOR_XILINX=yCONFIG_XILINX_EMACLITE=mCONFIG_XILINX_AXI_EMAC=mCONFIG_XILINX_LL_TEMAC=mCONFIG_NET_VENDOR_XIRCOM=yCONFIG_PCMCIA_XIRC2PS=mCONFIG_FDDI=mCONFIG_DEFXX=mCONFIG_DEFXX_MMIO=yCONFIG_SKFP=m
# CONFIG_HIPPI is not setCONFIG_NET_SB1000=mCONFIG_PHYLINK=mCONFIG_PHYLIB=mCONFIG_SWPHY=yCONFIG_LED_TRIGGER_PHY=yCONFIG_FIXED_PHY=mCONFIG_SFP=m
#
# MII PHY device drivers
#CONFIG_AMD_PHY=mCONFIG_ADIN_PHY=mCONFIG_AQUANTIA_PHY=mCONFIG_AX88796B_PHY=mCONFIG_BROADCOM_PHY=mCONFIG_BCM54140_PHY=mCONFIG_BCM7XXX_PHY=mCONFIG_BCM84881_PHY=mCONFIG_BCM87XX_PHY=mCONFIG_BCM_NET_PHYLIB=mCONFIG_CICADA_PHY=mCONFIG_CORTINA_PHY=mCONFIG_DAVICOM_PHY=mCONFIG_ICPLUS_PHY=mCONFIG_LXT_PHY=mCONFIG_INTEL_XWAY_PHY=mCONFIG_LSI_ET1011C_PHY=mCONFIG_MARVELL_PHY=mCONFIG_MARVELL_10G_PHY=mCONFIG_MICREL_PHY=mCONFIG_MICROCHIP_PHY=mCONFIG_MICROCHIP_T1_PHY=mCONFIG_MICROSEMI_PHY=mCONFIG_NATIONAL_PHY=mCONFIG_NXP_TJA11XX_PHY=mCONFIG_AT803X_PHY=mCONFIG_QSEMI_PHY=mCONFIG_REALTEK_PHY=mCONFIG_RENESAS_PHY=m
# CONFIG_ROCKCHIP_PHY is not setCONFIG_SMSC_PHY=mCONFIG_STE10XP=mCONFIG_TERANETICS_PHY=mCONFIG_DP83822_PHY=mCONFIG_DP83TC811_PHY=mCONFIG_DP83848_PHY=mCONFIG_DP83867_PHY=mCONFIG_DP83869_PHY=mCONFIG_VITESSE_PHY=mCONFIG_XILINX_GMII2RGMII=mCONFIG_MICREL_KS8995MA=mCONFIG_MDIO_DEVICE=mCONFIG_MDIO_BUS=mCONFIG_MDIO_DEVRES=mCONFIG_MDIO_BITBANG=mCONFIG_MDIO_BCM_UNIMAC=mCONFIG_MDIO_CAVIUM=mCONFIG_MDIO_GPIO=mCONFIG_MDIO_I2C=mCONFIG_MDIO_MVUSB=mCONFIG_MDIO_MSCC_MIIM=mCONFIG_MDIO_THUNDER=m
#
# MDIO Multiplexers
#
#
# PCS device drivers
#CONFIG_PCS_XPCS=mCONFIG_PCS_LYNX=m
# end of PCS device drivers
CONFIG_PLIP=mCONFIG_PPP=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_FILTER=yCONFIG_PPP_MPPE=mCONFIG_PPP_MULTILINK=yCONFIG_PPPOATM=mCONFIG_PPPOE=mCONFIG_PPTP=mCONFIG_PPPOL2TP=mCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_SLIP=mCONFIG_SLHC=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_USB_NET_DRIVERS=mCONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_RTL8152=mCONFIG_USB_LAN78XX=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_AX88179_178A=mCONFIG_USB_NET_CDCETHER=mCONFIG_USB_NET_CDC_EEM=mCONFIG_USB_NET_CDC_NCM=mCONFIG_USB_NET_HUAWEI_CDC_NCM=mCONFIG_USB_NET_CDC_MBIM=mCONFIG_USB_NET_DM9601=mCONFIG_USB_NET_SR9700=mCONFIG_USB_NET_SR9800=mCONFIG_USB_NET_SMSC75XX=mCONFIG_USB_NET_SMSC95XX=mCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=mCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET_ENABLE=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=mCONFIG_USB_NET_CX82310_ETH=mCONFIG_USB_NET_KALMIA=mCONFIG_USB_NET_QMI_WWAN=mCONFIG_USB_HSO=mCONFIG_USB_NET_INT51X1=mCONFIG_USB_CDC_PHONET=mCONFIG_USB_IPHETH=mCONFIG_USB_SIERRA_NET=mCONFIG_USB_VL600=mCONFIG_USB_NET_CH9200=mCONFIG_USB_NET_AQC111=mCONFIG_USB_RTL8153_ECM=mCONFIG_WLAN=yCONFIG_WLAN_VENDOR_ADMTEK=yCONFIG_ADM8211=mCONFIG_ATH_COMMON=mCONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not setCONFIG_ATH5K=mCONFIG_ATH5K_DEBUG=yCONFIG_ATH5K_TRACER=yCONFIG_ATH5K_PCI=yCONFIG_ATH9K_HW=mCONFIG_ATH9K_COMMON=mCONFIG_ATH9K_COMMON_DEBUG=yCONFIG_ATH9K_BTCOEX_SUPPORT=yCONFIG_ATH9K=mCONFIG_ATH9K_PCI=yCONFIG_ATH9K_AHB=yCONFIG_ATH9K_DEBUGFS=yCONFIG_ATH9K_STATION_STATISTICS=yCONFIG_ATH9K_DYNACK=yCONFIG_ATH9K_WOW=yCONFIG_ATH9K_RFKILL=yCONFIG_ATH9K_CHANNEL_CONTEXT=yCONFIG_ATH9K_PCOEM=yCONFIG_ATH9K_PCI_NO_EEPROM=mCONFIG_ATH9K_HTC=mCONFIG_ATH9K_HTC_DEBUGFS=yCONFIG_ATH9K_HWRNG=yCONFIG_ATH9K_COMMON_SPECTRAL=yCONFIG_CARL9170=mCONFIG_CARL9170_LEDS=yCONFIG_CARL9170_DEBUGFS=yCONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not setCONFIG_ATH6KL=mCONFIG_ATH6KL_SDIO=mCONFIG_ATH6KL_USB=mCONFIG_ATH6KL_DEBUG=yCONFIG_ATH6KL_TRACING=yCONFIG_AR5523=mCONFIG_WIL6210=mCONFIG_WIL6210_ISR_COR=yCONFIG_WIL6210_TRACING=yCONFIG_WIL6210_DEBUGFS=yCONFIG_ATH10K=mCONFIG_ATH10K_CE=yCONFIG_ATH10K_PCI=mCONFIG_ATH10K_SDIO=mCONFIG_ATH10K_USB=mCONFIG_ATH10K_DEBUG=yCONFIG_ATH10K_DEBUGFS=yCONFIG_ATH10K_SPECTRAL=yCONFIG_ATH10K_TRACING=yCONFIG_WCN36XX=mCONFIG_WCN36XX_DEBUGFS=yCONFIG_ATH11K=mCONFIG_ATH11K_AHB=mCONFIG_ATH11K_PCI=mCONFIG_ATH11K_DEBUG=yCONFIG_ATH11K_DEBUGFS=y
# CONFIG_ATH11K_TRACING is not setCONFIG_ATH11K_SPECTRAL=yCONFIG_WLAN_VENDOR_ATMEL=yCONFIG_ATMEL=mCONFIG_PCI_ATMEL=mCONFIG_PCMCIA_ATMEL=mCONFIG_AT76C50X_USB=mCONFIG_WLAN_VENDOR_BROADCOM=yCONFIG_B43=mCONFIG_B43_BCMA=yCONFIG_B43_SSB=yCONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not setCONFIG_B43_PCI_AUTOSELECT=yCONFIG_B43_PCICORE_AUTOSELECT=yCONFIG_B43_SDIO=yCONFIG_B43_BCMA_PIO=yCONFIG_B43_PIO=yCONFIG_B43_PHY_G=yCONFIG_B43_PHY_N=yCONFIG_B43_PHY_LP=yCONFIG_B43_PHY_HT=yCONFIG_B43_LEDS=yCONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not setCONFIG_B43LEGACY=mCONFIG_B43LEGACY_PCI_AUTOSELECT=yCONFIG_B43LEGACY_PCICORE_AUTOSELECT=yCONFIG_B43LEGACY_LEDS=yCONFIG_B43LEGACY_HWRNG=yCONFIG_B43LEGACY_DEBUG=yCONFIG_B43LEGACY_DMA=yCONFIG_B43LEGACY_PIO=yCONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not setCONFIG_BRCMUTIL=mCONFIG_BRCMSMAC=mCONFIG_BRCMFMAC=mCONFIG_BRCMFMAC_PROTO_BCDC=yCONFIG_BRCMFMAC_PROTO_MSGBUF=yCONFIG_BRCMFMAC_SDIO=yCONFIG_BRCMFMAC_USB=yCONFIG_BRCMFMAC_PCIE=yCONFIG_BRCM_TRACING=yCONFIG_BRCMDBG=yCONFIG_WLAN_VENDOR_CISCO=yCONFIG_AIRO=mCONFIG_AIRO_CS=mCONFIG_WLAN_VENDOR_INTEL=yCONFIG_IPW2100=mCONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not setCONFIG_IPW2200=mCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=yCONFIG_IPW2200_PROMISCUOUS=yCONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not setCONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not setCONFIG_IWLEGACY=mCONFIG_IWL4965=mCONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options # CONFIG_IWLEGACY_DEBUG=y CONFIG_IWLEGACY_DEBUGFS=y # end of iwl3945 / iwl4965 Debugging Options
CONFIG_IWLWIFI=mCONFIG_IWLWIFI_LEDS=yCONFIG_IWLDVM=mCONFIG_IWLMVM=mCONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
#
# Debugging Options
#CONFIG_IWLWIFI_DEBUG=yCONFIG_IWLWIFI_DEBUGFS=yCONFIG_IWLWIFI_DEVICE_TRACING=y
# end of Debugging Options
CONFIG_WLAN_VENDOR_INTERSIL=yCONFIG_HOSTAP=mCONFIG_HOSTAP_FIRMWARE=yCONFIG_HOSTAP_FIRMWARE_NVRAM=yCONFIG_HOSTAP_PLX=mCONFIG_HOSTAP_PCI=mCONFIG_HOSTAP_CS=mCONFIG_HERMES=mCONFIG_HERMES_PRISM=yCONFIG_HERMES_CACHE_FW_ON_INIT=yCONFIG_PLX_HERMES=mCONFIG_TMD_HERMES=mCONFIG_NORTEL_HERMES=mCONFIG_PCI_HERMES=mCONFIG_PCMCIA_HERMES=mCONFIG_PCMCIA_SPECTRUM=mCONFIG_ORINOCO_USB=mCONFIG_P54_COMMON=mCONFIG_P54_USB=mCONFIG_P54_PCI=mCONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not setCONFIG_P54_LEDS=yCONFIG_PRISM54=mCONFIG_WLAN_VENDOR_MARVELL=yCONFIG_LIBERTAS=mCONFIG_LIBERTAS_USB=mCONFIG_LIBERTAS_CS=mCONFIG_LIBERTAS_SDIO=mCONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not setCONFIG_LIBERTAS_MESH=yCONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not setCONFIG_LIBERTAS_THINFIRM_USB=mCONFIG_MWIFIEX=mCONFIG_MWIFIEX_SDIO=mCONFIG_MWIFIEX_PCIE=mCONFIG_MWIFIEX_USB=mCONFIG_MWL8K=mCONFIG_WLAN_VENDOR_MEDIATEK=yCONFIG_MT7601U=mCONFIG_MT76_CORE=mCONFIG_MT76_LEDS=yCONFIG_MT76_USB=mCONFIG_MT76_SDIO=m
CONFIG_MT76x02_LIB=m
CONFIG_MT76x02_USB=mCONFIG_MT76_CONNAC_LIB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0U=m
CONFIG_MT76x0E=m
CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2E=m
CONFIG_MT76x2U=mCONFIG_MT7603E=mCONFIG_MT7615_COMMON=mCONFIG_MT7615E=mCONFIG_MT7663_USB_SDIO_COMMON=mCONFIG_MT7663U=mCONFIG_MT7663S=mCONFIG_MT7915E=mCONFIG_MT7921E=mCONFIG_WLAN_VENDOR_MICROCHIP=yCONFIG_WILC1000=mCONFIG_WILC1000_SDIO=mCONFIG_WILC1000_SPI=m
# CONFIG_WILC1000_HW_OOB_INTR is not setCONFIG_WLAN_VENDOR_RALINK=yCONFIG_RT2X00=mCONFIG_RT2400PCI=mCONFIG_RT2500PCI=mCONFIG_RT61PCI=mCONFIG_RT2800PCI=mCONFIG_RT2800PCI_RT33XX=yCONFIG_RT2800PCI_RT35XX=yCONFIG_RT2800PCI_RT53XX=yCONFIG_RT2800PCI_RT3290=yCONFIG_RT2500USB=mCONFIG_RT73USB=mCONFIG_RT2800USB=mCONFIG_RT2800USB_RT33XX=yCONFIG_RT2800USB_RT35XX=yCONFIG_RT2800USB_RT3573=yCONFIG_RT2800USB_RT53XX=yCONFIG_RT2800USB_RT55XX=yCONFIG_RT2800USB_UNKNOWN=yCONFIG_RT2800_LIB=mCONFIG_RT2800_LIB_MMIO=mCONFIG_RT2X00_LIB_MMIO=mCONFIG_RT2X00_LIB_PCI=mCONFIG_RT2X00_LIB_USB=mCONFIG_RT2X00_LIB=mCONFIG_RT2X00_LIB_FIRMWARE=yCONFIG_RT2X00_LIB_CRYPTO=yCONFIG_RT2X00_LIB_LEDS=yCONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not setCONFIG_WLAN_VENDOR_REALTEK=yCONFIG_RTL8180=mCONFIG_RTL8187=mCONFIG_RTL8187_LEDS=yCONFIG_RTL_CARDS=mCONFIG_RTL8192CE=mCONFIG_RTL8192SE=mCONFIG_RTL8192DE=mCONFIG_RTL8723AE=mCONFIG_RTL8723BE=mCONFIG_RTL8188EE=mCONFIG_RTL8192EE=mCONFIG_RTL8821AE=mCONFIG_RTL8192CU=mCONFIG_RTLWIFI=mCONFIG_RTLWIFI_PCI=mCONFIG_RTLWIFI_USB=mCONFIG_RTLWIFI_DEBUG=yCONFIG_RTL8192C_COMMON=mCONFIG_RTL8723_COMMON=mCONFIG_RTLBTCOEXIST=mCONFIG_RTL8XXXU=mCONFIG_RTL8XXXU_UNTESTED=yCONFIG_RTW88=mCONFIG_RTW88_CORE=mCONFIG_RTW88_PCI=mCONFIG_RTW88_8822B=mCONFIG_RTW88_8822C=mCONFIG_RTW88_8723D=mCONFIG_RTW88_8821C=mCONFIG_RTW88_8822BE=mCONFIG_RTW88_8822CE=mCONFIG_RTW88_8723DE=mCONFIG_RTW88_8821CE=mCONFIG_RTW88_DEBUG=yCONFIG_RTW88_DEBUGFS=yCONFIG_WLAN_VENDOR_RSI=yCONFIG_RSI_91X=mCONFIG_RSI_DEBUGFS=yCONFIG_RSI_SDIO=mCONFIG_RSI_USB=mCONFIG_RSI_COEX=yCONFIG_WLAN_VENDOR_ST=yCONFIG_CW1200=mCONFIG_CW1200_WLAN_SDIO=mCONFIG_CW1200_WLAN_SPI=mCONFIG_WLAN_VENDOR_TI=yCONFIG_WL1251=mCONFIG_WL1251_SPI=mCONFIG_WL1251_SDIO=mCONFIG_WL12XX=mCONFIG_WL18XX=mCONFIG_WLCORE=mCONFIG_WLCORE_SDIO=mCONFIG_WILINK_PLATFORM_DATA=yCONFIG_WLAN_VENDOR_ZYDAS=yCONFIG_USB_ZD1201=mCONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not setCONFIG_WLAN_VENDOR_QUANTENNA=yCONFIG_QTNFMAC=mCONFIG_QTNFMAC_PCIE=mCONFIG_PCMCIA_RAYCS=mCONFIG_PCMCIA_WL3501=mCONFIG_MAC80211_HWSIM=mCONFIG_USB_NET_RNDIS_WLAN=mCONFIG_VIRT_WIFI=m
# CONFIG_WAN is not setCONFIG_IEEE802154_DRIVERS=mCONFIG_IEEE802154_FAKELB=mCONFIG_IEEE802154_AT86RF230=m
# CONFIG_IEEE802154_AT86RF230_DEBUGFS is not setCONFIG_IEEE802154_MRF24J40=mCONFIG_IEEE802154_CC2520=mCONFIG_IEEE802154_ATUSB=mCONFIG_IEEE802154_ADF7242=mCONFIG_IEEE802154_CA8210=m
# CONFIG_IEEE802154_CA8210_DEBUGFS is not setCONFIG_IEEE802154_MCR20A=mCONFIG_IEEE802154_HWSIM=mCONFIG_XEN_NETDEV_FRONTEND=mCONFIG_XEN_NETDEV_BACKEND=mCONFIG_VMXNET3=mCONFIG_FUJITSU_ES=mCONFIG_USB4_NET=mCONFIG_HYPERV_NET=mCONFIG_NETDEVSIM=mCONFIG_NET_FAILOVER=mCONFIG_ISDN=yCONFIG_ISDN_CAPI=yCONFIG_CAPI_TRACE=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_MISDN=mCONFIG_MISDN_DSP=mCONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#CONFIG_MISDN_HFCPCI=mCONFIG_MISDN_HFCMULTI=mCONFIG_MISDN_HFCUSB=mCONFIG_MISDN_AVMFRITZ=mCONFIG_MISDN_SPEEDFAX=mCONFIG_MISDN_INFINEON=mCONFIG_MISDN_W6692=mCONFIG_MISDN_NETJET=mCONFIG_MISDN_HDLC=mCONFIG_MISDN_IPAC=mCONFIG_MISDN_ISAR=mCONFIG_NVM=yCONFIG_NVM_PBLK=m
# CONFIG_NVM_PBLK_DEBUG is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_LEDS=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_SPARSEKMAP=mCONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=mCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ADC=mCONFIG_KEYBOARD_ADP5520=mCONFIG_KEYBOARD_ADP5588=mCONFIG_KEYBOARD_ADP5589=mCONFIG_KEYBOARD_APPLESPI=mCONFIG_KEYBOARD_ATKBD=mCONFIG_KEYBOARD_QT1050=mCONFIG_KEYBOARD_QT1070=mCONFIG_KEYBOARD_QT2160=mCONFIG_KEYBOARD_DLINK_DIR685=mCONFIG_KEYBOARD_LKKBD=mCONFIG_KEYBOARD_GPIO=mCONFIG_KEYBOARD_GPIO_POLLED=mCONFIG_KEYBOARD_TCA6416=mCONFIG_KEYBOARD_TCA8418=mCONFIG_KEYBOARD_MATRIX=mCONFIG_KEYBOARD_LM8323=mCONFIG_KEYBOARD_LM8333=mCONFIG_KEYBOARD_MAX7359=mCONFIG_KEYBOARD_MCS=mCONFIG_KEYBOARD_MPR121=mCONFIG_KEYBOARD_NEWTON=mCONFIG_KEYBOARD_OPENCORES=mCONFIG_KEYBOARD_SAMSUNG=mCONFIG_KEYBOARD_STOWAWAY=mCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_IQS62X=mCONFIG_KEYBOARD_TM2_TOUCHKEY=mCONFIG_KEYBOARD_TWL4030=mCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_CROS_EC=mCONFIG_KEYBOARD_MTK_PMIC=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_BYD=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=yCONFIG_MOUSE_PS2_CYPRESS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_ELANTECH_SMBUS=yCONFIG_MOUSE_PS2_SENTELIC=yCONFIG_MOUSE_PS2_TOUCHKIT=yCONFIG_MOUSE_PS2_FOCALTECH=yCONFIG_MOUSE_PS2_VMMOUSE=yCONFIG_MOUSE_PS2_SMBUS=yCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_APPLETOUCH=mCONFIG_MOUSE_BCM5974=mCONFIG_MOUSE_CYAPA=mCONFIG_MOUSE_ELAN_I2C=mCONFIG_MOUSE_ELAN_I2C_I2C=yCONFIG_MOUSE_ELAN_I2C_SMBUS=yCONFIG_MOUSE_VSXXXAA=mCONFIG_MOUSE_GPIO=mCONFIG_MOUSE_SYNAPTICS_I2C=mCONFIG_MOUSE_SYNAPTICS_USB=mCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADC=mCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=mCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=mCONFIG_JOYSTICK_IFORCE_232=mCONFIG_JOYSTICK_WARRIOR=mCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=mCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=mCONFIG_JOYSTICK_ZHENHUA=mCONFIG_JOYSTICK_DB9=mCONFIG_JOYSTICK_GAMECON=mCONFIG_JOYSTICK_TURBOGRAFX=mCONFIG_JOYSTICK_AS5011=mCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=mCONFIG_JOYSTICK_XPAD_FF=yCONFIG_JOYSTICK_XPAD_LEDS=yCONFIG_JOYSTICK_WALKERA0701=mCONFIG_JOYSTICK_PSXPAD_SPI=mCONFIG_JOYSTICK_PSXPAD_SPI_FF=yCONFIG_JOYSTICK_PXRC=mCONFIG_JOYSTICK_FSIA6B=mCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=mCONFIG_TABLET_USB_AIPTEK=mCONFIG_TABLET_USB_HANWANG=mCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_PEGASUS=mCONFIG_TABLET_SERIAL_WACOM4=mCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_PROPERTIES=yCONFIG_TOUCHSCREEN_88PM860X=mCONFIG_TOUCHSCREEN_ADS7846=mCONFIG_TOUCHSCREEN_AD7877=mCONFIG_TOUCHSCREEN_AD7879=mCONFIG_TOUCHSCREEN_AD7879_I2C=mCONFIG_TOUCHSCREEN_AD7879_SPI=mCONFIG_TOUCHSCREEN_ADC=mCONFIG_TOUCHSCREEN_ATMEL_MXT=mCONFIG_TOUCHSCREEN_ATMEL_MXT_T37=yCONFIG_TOUCHSCREEN_AUO_PIXCIR=mCONFIG_TOUCHSCREEN_BU21013=mCONFIG_TOUCHSCREEN_BU21029=mCONFIG_TOUCHSCREEN_CHIPONE_ICN8505=mCONFIG_TOUCHSCREEN_CY8CTMA140=mCONFIG_TOUCHSCREEN_CY8CTMG110=mCONFIG_TOUCHSCREEN_CYTTSP_CORE=mCONFIG_TOUCHSCREEN_CYTTSP_I2C=mCONFIG_TOUCHSCREEN_CYTTSP_SPI=mCONFIG_TOUCHSCREEN_CYTTSP4_CORE=mCONFIG_TOUCHSCREEN_CYTTSP4_I2C=mCONFIG_TOUCHSCREEN_CYTTSP4_SPI=mCONFIG_TOUCHSCREEN_DA9034=mCONFIG_TOUCHSCREEN_DA9052=mCONFIG_TOUCHSCREEN_DYNAPRO=mCONFIG_TOUCHSCREEN_HAMPSHIRE=mCONFIG_TOUCHSCREEN_EETI=mCONFIG_TOUCHSCREEN_EGALAX_SERIAL=mCONFIG_TOUCHSCREEN_EXC3000=mCONFIG_TOUCHSCREEN_FUJITSU=mCONFIG_TOUCHSCREEN_GOODIX=mCONFIG_TOUCHSCREEN_HIDEEP=mCONFIG_TOUCHSCREEN_ILI210X=mCONFIG_TOUCHSCREEN_S6SY761=mCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_EKTF2127=mCONFIG_TOUCHSCREEN_ELAN=mCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_WACOM_W8001=mCONFIG_TOUCHSCREEN_WACOM_I2C=mCONFIG_TOUCHSCREEN_MAX11801=mCONFIG_TOUCHSCREEN_MCS5000=mCONFIG_TOUCHSCREEN_MMS114=mCONFIG_TOUCHSCREEN_MELFAS_MIP4=mCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_INEXIO=mCONFIG_TOUCHSCREEN_MK712=mCONFIG_TOUCHSCREEN_PENMOUNT=mCONFIG_TOUCHSCREEN_EDT_FT5X06=mCONFIG_TOUCHSCREEN_TOUCHRIGHT=mCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_TI_AM335X_TSC=mCONFIG_TOUCHSCREEN_UCB1400=mCONFIG_TOUCHSCREEN_PIXCIR=mCONFIG_TOUCHSCREEN_WDT87XX_I2C=mCONFIG_TOUCHSCREEN_WM831X=mCONFIG_TOUCHSCREEN_WM97XX=mCONFIG_TOUCHSCREEN_WM9705=yCONFIG_TOUCHSCREEN_WM9712=yCONFIG_TOUCHSCREEN_WM9713=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=mCONFIG_TOUCHSCREEN_MC13783=mCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_USB_JASTEC=yCONFIG_TOUCHSCREEN_USB_ELO=yCONFIG_TOUCHSCREEN_USB_E2I=yCONFIG_TOUCHSCREEN_USB_ZYTRONIC=yCONFIG_TOUCHSCREEN_USB_ETT_TC45USB=yCONFIG_TOUCHSCREEN_USB_NEXIO=yCONFIG_TOUCHSCREEN_USB_EASYTOUCH=yCONFIG_TOUCHSCREEN_TOUCHIT213=mCONFIG_TOUCHSCREEN_TSC_SERIO=mCONFIG_TOUCHSCREEN_TSC200X_CORE=mCONFIG_TOUCHSCREEN_TSC2004=mCONFIG_TOUCHSCREEN_TSC2005=mCONFIG_TOUCHSCREEN_TSC2007=mCONFIG_TOUCHSCREEN_TSC2007_IIO=yCONFIG_TOUCHSCREEN_PCAP=mCONFIG_TOUCHSCREEN_RM_TS=mCONFIG_TOUCHSCREEN_SILEAD=mCONFIG_TOUCHSCREEN_SIS_I2C=mCONFIG_TOUCHSCREEN_ST1232=mCONFIG_TOUCHSCREEN_STMFTS=mCONFIG_TOUCHSCREEN_SUR40=mCONFIG_TOUCHSCREEN_SURFACE3_SPI=mCONFIG_TOUCHSCREEN_SX8654=mCONFIG_TOUCHSCREEN_TPS6507X=mCONFIG_TOUCHSCREEN_ZET6223=mCONFIG_TOUCHSCREEN_ZFORCE=mCONFIG_TOUCHSCREEN_ROHM_BU21023=mCONFIG_TOUCHSCREEN_IQS5XX=mCONFIG_TOUCHSCREEN_ZINITIX=mCONFIG_INPUT_MISC=yCONFIG_INPUT_88PM860X_ONKEY=mCONFIG_INPUT_88PM80X_ONKEY=mCONFIG_INPUT_AD714X=mCONFIG_INPUT_AD714X_I2C=mCONFIG_INPUT_AD714X_SPI=mCONFIG_INPUT_ARIZONA_HAPTICS=mCONFIG_INPUT_BMA150=mCONFIG_INPUT_E3X0_BUTTON=mCONFIG_INPUT_PCSPKR=mCONFIG_INPUT_MAX77693_HAPTIC=mCONFIG_INPUT_MAX8925_ONKEY=mCONFIG_INPUT_MAX8997_HAPTIC=mCONFIG_INPUT_MC13783_PWRBUTTON=mCONFIG_INPUT_MMA8450=mCONFIG_INPUT_APANEL=mCONFIG_INPUT_GPIO_BEEPER=mCONFIG_INPUT_GPIO_DECODER=mCONFIG_INPUT_GPIO_VIBRA=mCONFIG_INPUT_ATLAS_BTNS=mCONFIG_INPUT_ATI_REMOTE2=mCONFIG_INPUT_KEYSPAN_REMOTE=mCONFIG_INPUT_KXTJ9=mCONFIG_INPUT_POWERMATE=mCONFIG_INPUT_YEALINK=mCONFIG_INPUT_CM109=mCONFIG_INPUT_REGULATOR_HAPTIC=mCONFIG_INPUT_RETU_PWRBUTTON=mCONFIG_INPUT_AXP20X_PEK=mCONFIG_INPUT_TWL4030_PWRBUTTON=mCONFIG_INPUT_TWL4030_VIBRA=mCONFIG_INPUT_TWL6040_VIBRA=mCONFIG_INPUT_UINPUT=mCONFIG_INPUT_PALMAS_PWRBUTTON=mCONFIG_INPUT_PCF50633_PMU=mCONFIG_INPUT_PCF8574=mCONFIG_INPUT_PWM_BEEPER=mCONFIG_INPUT_PWM_VIBRA=mCONFIG_INPUT_GPIO_ROTARY_ENCODER=mCONFIG_INPUT_DA7280_HAPTICS=mCONFIG_INPUT_DA9052_ONKEY=mCONFIG_INPUT_DA9055_ONKEY=mCONFIG_INPUT_DA9063_ONKEY=mCONFIG_INPUT_WM831X_ON=mCONFIG_INPUT_PCAP=mCONFIG_INPUT_ADXL34X=mCONFIG_INPUT_ADXL34X_I2C=mCONFIG_INPUT_ADXL34X_SPI=mCONFIG_INPUT_IMS_PCU=mCONFIG_INPUT_IQS269A=mCONFIG_INPUT_CMA3000=mCONFIG_INPUT_CMA3000_I2C=mCONFIG_INPUT_XEN_KBDDEV_FRONTEND=mCONFIG_INPUT_IDEAPAD_SLIDEBAR=mCONFIG_INPUT_SOC_BUTTON_ARRAY=mCONFIG_INPUT_DRV260X_HAPTICS=mCONFIG_INPUT_DRV2665_HAPTICS=mCONFIG_INPUT_DRV2667_HAPTICS=mCONFIG_INPUT_RAVE_SP_PWRBUTTON=mCONFIG_RMI4_CORE=mCONFIG_RMI4_I2C=mCONFIG_RMI4_SPI=mCONFIG_RMI4_SMB=mCONFIG_RMI4_F03=yCONFIG_RMI4_F03_SERIO=mCONFIG_RMI4_2D_SENSOR=yCONFIG_RMI4_F11=yCONFIG_RMI4_F12=yCONFIG_RMI4_F30=yCONFIG_RMI4_F34=yCONFIG_RMI4_F3A=y
# CONFIG_RMI4_F54 is not setCONFIG_RMI4_F55=y
#
# Hardware I/O ports
#CONFIG_SERIO=mCONFIG_ARCH_MIGHT_HAVE_PC_SERIO=yCONFIG_SERIO_I8042=mCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=mCONFIG_SERIO_RAW=mCONFIG_SERIO_ALTERA_PS2=mCONFIG_SERIO_PS2MULT=mCONFIG_SERIO_ARC_PS2=mCONFIG_HYPERV_KEYBOARD=mCONFIG_SERIO_GPIO_PS2=mCONFIG_USERIO=mCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports # end of Input device support
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set CONFIG_SERIAL_8250_FINTEK=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_EXAR=m CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_MEN_MCB=m CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_DW=m CONFIG_SERIAL_8250_RT288X=y CONFIG_SERIAL_8250_LPSS=y CONFIG_SERIAL_8250_MID=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_MAX3100=mCONFIG_SERIAL_MAX310X=mCONFIG_SERIAL_UARTLITE=mCONFIG_SERIAL_UARTLITE_NR_UARTS=1CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not setCONFIG_SERIAL_SCCNXP=mCONFIG_SERIAL_SC16IS7XX_CORE=mCONFIG_SERIAL_SC16IS7XX=mCONFIG_SERIAL_SC16IS7XX_I2C=yCONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_BCM63XX is not setCONFIG_SERIAL_ALTERA_JTAGUART=mCONFIG_SERIAL_ALTERA_UART=mCONFIG_SERIAL_ALTERA_UART_MAXPORTS=4CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200CONFIG_SERIAL_ARC=mCONFIG_SERIAL_ARC_NR_PORTS=1CONFIG_SERIAL_RP2=mCONFIG_SERIAL_RP2_NR_UARTS=32CONFIG_SERIAL_FSL_LPUART=mCONFIG_SERIAL_FSL_LINFLEXUART=mCONFIG_SERIAL_MEN_Z135=mCONFIG_SERIAL_SPRD=m
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=yCONFIG_SERIAL_NONSTANDARD=yCONFIG_ROCKETPORT=mCONFIG_CYCLADES=mCONFIG_CYZ_INTR=yCONFIG_MOXA_INTELLIO=mCONFIG_MOXA_SMARTIO=mCONFIG_SYNCLINK_GT=mCONFIG_ISI=mCONFIG_N_HDLC=mCONFIG_N_GSM=mCONFIG_NOZOMI=mCONFIG_NULL_TTY=mCONFIG_TRACE_ROUTER=mCONFIG_TRACE_SINK=mCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_HVC_XEN_FRONTEND=yCONFIG_SERIAL_DEV_BUS=yCONFIG_SERIAL_DEV_CTRL_TTYPORT=yCONFIG_PRINTER=mCONFIG_LP_CONSOLE=yCONFIG_PPDEV=mCONFIG_VIRTIO_CONSOLE=mCONFIG_IPMI_HANDLER=mCONFIG_IPMI_DMI_DECODE=yCONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_SSIF=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_IPMB_DEVICE_INTERFACE=mCONFIG_HW_RANDOM=mCONFIG_HW_RANDOM_TIMERIOMEM=mCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_BA431=mCONFIG_HW_RANDOM_VIA=mCONFIG_HW_RANDOM_VIRTIO=mCONFIG_HW_RANDOM_XIPHERA=mCONFIG_APPLICOM=m
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=mCONFIG_CARDMAN_4000=mCONFIG_CARDMAN_4040=mCONFIG_SCR24X=mCONFIG_IPWIRELESS=m
# end of PCMCIA character devices
CONFIG_MWAVE=mCONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not setCONFIG_NVRAM=yCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=8192CONFIG_DEVPORT=yCONFIG_HPET=y
# CONFIG_HPET_MMAP is not setCONFIG_HANGCHECK_TIMER=mCONFIG_TCG_TPM=mCONFIG_HW_RANDOM_TPM=yCONFIG_TCG_TIS_CORE=mCONFIG_TCG_TIS=mCONFIG_TCG_TIS_SPI=mCONFIG_TCG_TIS_SPI_CR50=yCONFIG_TCG_TIS_I2C_CR50=mCONFIG_TCG_TIS_I2C_ATMEL=mCONFIG_TCG_TIS_I2C_INFINEON=mCONFIG_TCG_TIS_I2C_NUVOTON=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=mCONFIG_TCG_XEN=mCONFIG_TCG_CRB=mCONFIG_TCG_VTPM_PROXY=mCONFIG_TCG_TIS_ST33ZP24=mCONFIG_TCG_TIS_ST33ZP24_I2C=mCONFIG_TCG_TIS_ST33ZP24_SPI=mCONFIG_TELCLOCK=mCONFIG_XILLYBUS=mCONFIG_XILLYBUS_PCIE=m
# end of Character devices
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_ACPI_I2C_OPREGION=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#CONFIG_I2C_MUX_GPIO=mCONFIG_I2C_MUX_LTC4306=mCONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=mCONFIG_I2C_MUX_REG=mCONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_SMBUS=mCONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=mCONFIG_I2C_AMD_MP2=mCONFIG_I2C_I801=mCONFIG_I2C_ISCH=mCONFIG_I2C_ISMT=mCONFIG_I2C_PIIX4=mCONFIG_I2C_CHT_WC=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_NFORCE2_S4985=mCONFIG_I2C_NVIDIA_GPU=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_SLAVE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DESIGNWARE_BAYTRAIL=y CONFIG_I2C_DESIGNWARE_PCI=yCONFIG_I2C_EMEV2=mCONFIG_I2C_GPIO=m
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set CONFIG_I2C_KEMPLD=mCONFIG_I2C_OCORES=mCONFIG_I2C_PCA_PLATFORM=mCONFIG_I2C_SIMTEC=mCONFIG_I2C_XILINX=m
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_DIOLAN_U2C=mCONFIG_I2C_DLN2=mCONFIG_I2C_PARPORT=mCONFIG_I2C_ROBOTFUZZ_OSIF=mCONFIG_I2C_TAOS_EVM=mCONFIG_I2C_TINY_USB=mCONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_MLXCPLD=mCONFIG_I2C_CROS_EC_TUNNEL=m
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=mCONFIG_I2C_SLAVE=yCONFIG_I2C_SLAVE_EEPROM=mCONFIG_I2C_SLAVE_TESTUNIT=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=yCONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_ALTERA=mCONFIG_SPI_AXI_SPI_ENGINE=mCONFIG_SPI_BITBANG=mCONFIG_SPI_BUTTERFLY=mCONFIG_SPI_CADENCE=mCONFIG_SPI_DESIGNWARE=mCONFIG_SPI_DW_DMA=yCONFIG_SPI_DW_PCI=mCONFIG_SPI_DW_MMIO=mCONFIG_SPI_DLN2=mCONFIG_SPI_NXP_FLEXSPI=mCONFIG_SPI_GPIO=mCONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_LANTIQ_SSC is not setCONFIG_SPI_OC_TINY=mCONFIG_SPI_PXA2XX=mCONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not setCONFIG_SPI_SC18IS602=mCONFIG_SPI_SIFIVE=mCONFIG_SPI_MXIC=mCONFIG_SPI_XCOMM=mCONFIG_SPI_XILINX=mCONFIG_SPI_ZYNQMP_GQSPI=mCONFIG_SPI_AMD=m
#
# SPI Multiplexer support
#CONFIG_SPI_MUX=m
#
# SPI Protocol Masters
#CONFIG_SPI_SPIDEV=mCONFIG_SPI_LOOPBACK_TEST=mCONFIG_SPI_TLE62X0=mCONFIG_SPI_SLAVE=yCONFIG_SPI_SLAVE_TIME=mCONFIG_SPI_SLAVE_SYSTEM_CONTROL=mCONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not setCONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#CONFIG_PPS_CLIENT_KTIMER=mCONFIG_PPS_CLIENT_LDISC=mCONFIG_PPS_CLIENT_PARPORT=mCONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=yCONFIG_DP83640_PHY=mCONFIG_PTP_1588_CLOCK_INES=mCONFIG_PTP_1588_CLOCK_KVM=mCONFIG_PTP_1588_CLOCK_IDT82P33=mCONFIG_PTP_1588_CLOCK_IDTCM=mCONFIG_PTP_1588_CLOCK_VMW=mCONFIG_PTP_1588_CLOCK_OCP=m
# end of PTP clock support
CONFIG_PINCTRL=yCONFIG_PINMUX=yCONFIG_PINCONF=yCONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not setCONFIG_PINCTRL_AMD=mCONFIG_PINCTRL_DA9062=mCONFIG_PINCTRL_MCP23S08_I2C=mCONFIG_PINCTRL_MCP23S08_SPI=mCONFIG_PINCTRL_MCP23S08=mCONFIG_PINCTRL_SX150X=yCONFIG_PINCTRL_BAYTRAIL=yCONFIG_PINCTRL_CHERRYVIEW=yCONFIG_PINCTRL_LYNXPOINT=yCONFIG_PINCTRL_INTEL=yCONFIG_PINCTRL_ALDERLAKE=yCONFIG_PINCTRL_BROXTON=yCONFIG_PINCTRL_CANNONLAKE=yCONFIG_PINCTRL_CEDARFORK=yCONFIG_PINCTRL_DENVERTON=yCONFIG_PINCTRL_ELKHARTLAKE=yCONFIG_PINCTRL_EMMITSBURG=yCONFIG_PINCTRL_GEMINILAKE=yCONFIG_PINCTRL_ICELAKE=yCONFIG_PINCTRL_JASPERLAKE=yCONFIG_PINCTRL_LAKEFIELD=yCONFIG_PINCTRL_LEWISBURG=yCONFIG_PINCTRL_SUNRISEPOINT=yCONFIG_PINCTRL_TIGERLAKE=y
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_PINCTRL_MADERA=mCONFIG_PINCTRL_CS47L15=yCONFIG_PINCTRL_CS47L35=yCONFIG_PINCTRL_CS47L85=yCONFIG_PINCTRL_CS47L90=yCONFIG_PINCTRL_CS47L92=yCONFIG_GPIOLIB=yCONFIG_GPIOLIB_FASTPATH_LIMIT=512CONFIG_GPIO_ACPI=yCONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not setCONFIG_GPIO_CDEV=yCONFIG_GPIO_CDEV_V1=yCONFIG_GPIO_GENERIC=mCONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers
#CONFIG_GPIO_AMDPT=mCONFIG_GPIO_DWAPB=mCONFIG_GPIO_EXAR=mCONFIG_GPIO_GENERIC_PLATFORM=mCONFIG_GPIO_ICH=mCONFIG_GPIO_MB86S7X=mCONFIG_GPIO_MENZ127=mCONFIG_GPIO_SIOX=mCONFIG_GPIO_VX855=mCONFIG_GPIO_AMD_FCH=m
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#CONFIG_GPIO_F7188X=mCONFIG_GPIO_IT87=mCONFIG_GPIO_SCH=mCONFIG_GPIO_SCH311X=mCONFIG_GPIO_WINBOND=mCONFIG_GPIO_WS16C48=m
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#CONFIG_GPIO_ADP5588=mCONFIG_GPIO_MAX7300=mCONFIG_GPIO_MAX732X=mCONFIG_GPIO_PCA953X=mCONFIG_GPIO_PCA953X_IRQ=yCONFIG_GPIO_PCA9570=mCONFIG_GPIO_PCF857X=mCONFIG_GPIO_TPIC2810=m
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#CONFIG_GPIO_ADP5520=mCONFIG_GPIO_ARIZONA=mCONFIG_GPIO_BD9571MWV=mCONFIG_GPIO_CRYSTAL_COVE=mCONFIG_GPIO_DA9052=mCONFIG_GPIO_DA9055=mCONFIG_GPIO_DLN2=mCONFIG_GPIO_JANZ_TTL=mCONFIG_GPIO_KEMPLD=mCONFIG_GPIO_LP3943=mCONFIG_GPIO_LP873X=mCONFIG_GPIO_MADERA=mCONFIG_GPIO_PALMAS=yCONFIG_GPIO_RC5T583=yCONFIG_GPIO_TPS65086=mCONFIG_GPIO_TPS6586X=yCONFIG_GPIO_TPS65910=yCONFIG_GPIO_TPS65912=mCONFIG_GPIO_TPS68470=yCONFIG_GPIO_TQMX86=mCONFIG_GPIO_TWL4030=mCONFIG_GPIO_TWL6040=mCONFIG_GPIO_UCB1400=mCONFIG_GPIO_WHISKEY_COVE=mCONFIG_GPIO_WM831X=mCONFIG_GPIO_WM8350=mCONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#CONFIG_GPIO_AMD8111=mCONFIG_GPIO_ML_IOH=mCONFIG_GPIO_PCI_IDIO_16=mCONFIG_GPIO_PCIE_IDIO_24=mCONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#CONFIG_GPIO_MAX3191X=mCONFIG_GPIO_MAX7301=mCONFIG_GPIO_MC33880=mCONFIG_GPIO_PISOSR=mCONFIG_GPIO_XRA1403=m
# end of SPI GPIO expanders
#
# USB GPIO expanders
#CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#CONFIG_GPIO_AGGREGATOR=mCONFIG_GPIO_MOCKUP=m
# end of Virtual GPIO drivers
CONFIG_W1=mCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=mCONFIG_W1_MASTER_DS2490=mCONFIG_W1_MASTER_DS2482=mCONFIG_W1_MASTER_DS1WM=mCONFIG_W1_MASTER_GPIO=mCONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=mCONFIG_W1_SLAVE_SMEM=mCONFIG_W1_SLAVE_DS2405=mCONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not setCONFIG_W1_SLAVE_DS2413=mCONFIG_W1_SLAVE_DS2406=mCONFIG_W1_SLAVE_DS2423=mCONFIG_W1_SLAVE_DS2805=mCONFIG_W1_SLAVE_DS2430=mCONFIG_W1_SLAVE_DS2431=mCONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not setCONFIG_W1_SLAVE_DS2438=mCONFIG_W1_SLAVE_DS250X=mCONFIG_W1_SLAVE_DS2780=mCONFIG_W1_SLAVE_DS2781=mCONFIG_W1_SLAVE_DS28E04=mCONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves
CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MT6323=y CONFIG_POWER_RESET_RESTART=y CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set CONFIG_POWER_SUPPLY_HWMON=y CONFIG_PDA_POWER=m CONFIG_GENERIC_ADC_BATTERY=m CONFIG_MAX8925_POWER=m CONFIG_WM831X_BACKUP=m CONFIG_WM831X_POWER=m CONFIG_WM8350_POWER=mCONFIG_TEST_POWER=m CONFIG_BATTERY_88PM860X=m CONFIG_CHARGER_ADP5061=m CONFIG_BATTERY_CW2015=m CONFIG_BATTERY_DS2760=m CONFIG_BATTERY_DS2780=m CONFIG_BATTERY_DS2781=m CONFIG_BATTERY_DS2782=m CONFIG_BATTERY_SBS=mCONFIG_CHARGER_SBS=mCONFIG_MANAGER_SBS=m CONFIG_BATTERY_BQ27XXX=m CONFIG_BATTERY_BQ27XXX_I2C=m CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set CONFIG_BATTERY_DA9030=m CONFIG_BATTERY_DA9052=m CONFIG_CHARGER_DA9150=m CONFIG_BATTERY_DA9150=m CONFIG_CHARGER_AXP20X=m CONFIG_BATTERY_AXP20X=m CONFIG_AXP20X_POWER=m CONFIG_AXP288_CHARGER=m CONFIG_AXP288_FUEL_GAUGE=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m CONFIG_BATTERY_MAX1721X=m CONFIG_BATTERY_TWL4030_MADC=m CONFIG_CHARGER_88PM860X=m CONFIG_CHARGER_PCF50633=m CONFIG_BATTERY_RX51=m CONFIG_CHARGER_ISP1704=m CONFIG_CHARGER_MAX8903=m CONFIG_CHARGER_TWL4030=m CONFIG_CHARGER_LP8727=m CONFIG_CHARGER_LP8788=m CONFIG_CHARGER_GPIO=m CONFIG_CHARGER_MANAGER=y CONFIG_CHARGER_LT3651=m CONFIG_CHARGER_LTC4162L=m CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_MAX8998=m CONFIG_CHARGER_MP2629=m CONFIG_CHARGER_BQ2415X=m CONFIG_CHARGER_BQ24190=m CONFIG_CHARGER_BQ24257=m CONFIG_CHARGER_BQ24735=m CONFIG_CHARGER_BQ2515X=m CONFIG_CHARGER_BQ25890=m CONFIG_CHARGER_BQ25980=m CONFIG_CHARGER_BQ256XX=m CONFIG_CHARGER_SMB347=m CONFIG_CHARGER_TPS65090=m CONFIG_BATTERY_GAUGE_LTC2941=m CONFIG_BATTERY_RT5033=m CONFIG_CHARGER_RT9455=m CONFIG_CHARGER_CROS_USBPD=m CONFIG_CHARGER_BD99954=m CONFIG_CHARGER_WILCO=mCONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#CONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=mCONFIG_SENSORS_AD7314=mCONFIG_SENSORS_AD7414=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=mCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM1177=mCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7X10=mCONFIG_SENSORS_ADT7310=mCONFIG_SENSORS_ADT7410=mCONFIG_SENSORS_ADT7411=mCONFIG_SENSORS_ADT7462=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7475=mCONFIG_SENSORS_AHT10=mCONFIG_SENSORS_AS370=mCONFIG_SENSORS_ASC7621=mCONFIG_SENSORS_AXI_FAN_CONTROL=mCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_K10TEMP=mCONFIG_SENSORS_FAM15H_POWER=mCONFIG_SENSORS_AMD_ENERGY=mCONFIG_SENSORS_APPLESMC=mCONFIG_SENSORS_ASB100=mCONFIG_SENSORS_ASPEED=mCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_CORSAIR_CPRO=mCONFIG_SENSORS_CORSAIR_PSU=mCONFIG_SENSORS_DRIVETEMP=mCONFIG_SENSORS_DS620=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_DELL_SMM=mCONFIG_SENSORS_DA9052_ADC=mCONFIG_SENSORS_DA9055=mCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_MC13783_ADC=mCONFIG_SENSORS_FSCHMD=mCONFIG_SENSORS_FTSTEUTATES=mCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_G760A=mCONFIG_SENSORS_G762=mCONFIG_SENSORS_HIH6130=mCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_IIO_HWMON=mCONFIG_SENSORS_I5500=mCONFIG_SENSORS_CORETEMP=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_JC42=mCONFIG_SENSORS_POWR1220=mCONFIG_SENSORS_LINEAGE=mCONFIG_SENSORS_LTC2945=mCONFIG_SENSORS_LTC2947=mCONFIG_SENSORS_LTC2947_I2C=mCONFIG_SENSORS_LTC2947_SPI=mCONFIG_SENSORS_LTC2990=mCONFIG_SENSORS_LTC2992=mCONFIG_SENSORS_LTC4151=mCONFIG_SENSORS_LTC4215=mCONFIG_SENSORS_LTC4222=mCONFIG_SENSORS_LTC4245=mCONFIG_SENSORS_LTC4260=mCONFIG_SENSORS_LTC4261=mCONFIG_SENSORS_MAX1111=mCONFIG_SENSORS_MAX127=mCONFIG_SENSORS_MAX16065=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX1668=mCONFIG_SENSORS_MAX197=mCONFIG_SENSORS_MAX31722=mCONFIG_SENSORS_MAX31730=mCONFIG_SENSORS_MAX6621=mCONFIG_SENSORS_MAX6639=mCONFIG_SENSORS_MAX6642=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_MAX6697=mCONFIG_SENSORS_MAX31790=mCONFIG_SENSORS_MCP3021=mCONFIG_SENSORS_MLXREG_FAN=mCONFIG_SENSORS_TC654=mCONFIG_SENSORS_TPS23861=mCONFIG_SENSORS_MENF21BMC_HWMON=mCONFIG_SENSORS_MR75203=mCONFIG_SENSORS_ADCXX=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM70=mCONFIG_SENSORS_LM73=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=mCONFIG_SENSORS_LM95234=mCONFIG_SENSORS_LM95241=mCONFIG_SENSORS_LM95245=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_NTC_THERMISTOR=mCONFIG_SENSORS_NCT6683=mCONFIG_SENSORS_NCT6775=mCONFIG_SENSORS_NCT7802=mCONFIG_SENSORS_NCT7904=mCONFIG_SENSORS_NPCM7XX=mCONFIG_SENSORS_PCF8591=mCONFIG_PMBUS=mCONFIG_SENSORS_PMBUS=mCONFIG_SENSORS_ADM1266=mCONFIG_SENSORS_ADM1275=mCONFIG_SENSORS_BEL_PFE=mCONFIG_SENSORS_IBM_CFFPS=mCONFIG_SENSORS_INSPUR_IPSPS=mCONFIG_SENSORS_IR35221=mCONFIG_SENSORS_IR38064=mCONFIG_SENSORS_IRPS5401=mCONFIG_SENSORS_ISL68137=mCONFIG_SENSORS_LM25066=mCONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC2978_REGULATOR is not setCONFIG_SENSORS_LTC3815=mCONFIG_SENSORS_MAX16064=mCONFIG_SENSORS_MAX16601=mCONFIG_SENSORS_MAX20730=mCONFIG_SENSORS_MAX20751=mCONFIG_SENSORS_MAX31785=mCONFIG_SENSORS_MAX34440=mCONFIG_SENSORS_MAX8688=mCONFIG_SENSORS_MP2975=mCONFIG_SENSORS_PM6764TR=mCONFIG_SENSORS_PXE1610=mCONFIG_SENSORS_Q54SJ108A2=mCONFIG_SENSORS_TPS40422=mCONFIG_SENSORS_TPS53679=mCONFIG_SENSORS_UCD9000=mCONFIG_SENSORS_UCD9200=mCONFIG_SENSORS_XDPE122=mCONFIG_SENSORS_ZL6100=mCONFIG_SENSORS_SBTSI=mCONFIG_SENSORS_SHT15=mCONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=mCONFIG_SENSORS_SHTC1=mCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_EMC1403=mCONFIG_SENSORS_EMC2103=mCONFIG_SENSORS_EMC6W201=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_SCH56XX_COMMON=mCONFIG_SENSORS_SCH5627=mCONFIG_SENSORS_SCH5636=mCONFIG_SENSORS_STTS751=mCONFIG_SENSORS_SMM665=mCONFIG_SENSORS_ADC128D818=mCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_ADS7871=mCONFIG_SENSORS_AMC6821=mCONFIG_SENSORS_INA209=mCONFIG_SENSORS_INA2XX=mCONFIG_SENSORS_INA3221=mCONFIG_SENSORS_TC74=mCONFIG_SENSORS_THMC50=mCONFIG_SENSORS_TMP102=mCONFIG_SENSORS_TMP103=mCONFIG_SENSORS_TMP108=mCONFIG_SENSORS_TMP401=mCONFIG_SENSORS_TMP421=mCONFIG_SENSORS_TMP513=mCONFIG_SENSORS_VIA_CPUTEMP=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83773G=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not setCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_WM831X=mCONFIG_SENSORS_WM8350=mCONFIG_SENSORS_XGENE=mCONFIG_SENSORS_INTEL_M10_BMC_HWMON=m
#
# ACPI drivers
#CONFIG_SENSORS_ACPI_POWER=m CONFIG_SENSORS_ATK0110=mCONFIG_THERMAL=yCONFIG_THERMAL_NETLINK=y
# CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=100 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#CONFIG_INTEL_POWERCLAMP=mCONFIG_X86_THERMAL_VECTOR=yCONFIG_X86_PKG_TEMP_THERMAL=mCONFIG_INTEL_SOC_DTS_IOSF_CORE=mCONFIG_INTEL_SOC_DTS_THERMAL=m
#
# ACPI INT340X thermal drivers
#CONFIG_INT340X_THERMAL=mCONFIG_ACPI_THERMAL_REL=mCONFIG_INT3406_THERMAL=mCONFIG_PROC_THERMAL_MMIO_RAPL=m
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_BXT_PMIC_THERMAL=mCONFIG_INTEL_PCH_THERMAL=m
# end of Intel thermal drivers
CONFIG_GENERIC_ADC_THERMAL=mCONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not setCONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=yCONFIG_WATCHDOG_OPEN_TIMEOUT=0CONFIG_WATCHDOG_SYSFS=y
#
# Watchdog Pretimeout Governors
#CONFIG_WATCHDOG_PRETIMEOUT_GOV=y CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=m CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=m
# CONFIG_SOFT_WATCHDOG_PRETIMEOUT is not setCONFIG_DA9052_WATCHDOG=mCONFIG_DA9055_WATCHDOG=mCONFIG_DA9063_WATCHDOG=mCONFIG_DA9062_WATCHDOG=mCONFIG_MENF21BMC_WATCHDOG=mCONFIG_MENZ069_WATCHDOG=mCONFIG_WDAT_WDT=mCONFIG_WM831X_WATCHDOG=mCONFIG_WM8350_WATCHDOG=mCONFIG_XILINX_WATCHDOG=mCONFIG_ZIIRAVE_WATCHDOG=mCONFIG_RAVE_SP_WATCHDOG=mCONFIG_MLX_WDT=mCONFIG_CADENCE_WATCHDOG=mCONFIG_DW_WATCHDOG=mCONFIG_TWL4030_WATCHDOG=mCONFIG_MAX63XX_WATCHDOG=mCONFIG_RETU_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_EBC_C384_WDT=mCONFIG_F71808E_WDT=mCONFIG_SP5100_TCO=mCONFIG_SBC_FITPC2_WATCHDOG=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=mCONFIG_IBMASR=mCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=mCONFIG_IE6XX_WDT=mCONFIG_ITCO_WDT=mCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=mCONFIG_IT87_WDT=mCONFIG_HP_WATCHDOG=mCONFIG_HPWDT_NMI_DECODING=yCONFIG_KEMPLD_WDT=mCONFIG_SC1200_WDT=mCONFIG_PC87413_WDT=mCONFIG_NV_TCO=mCONFIG_60XX_WDT=mCONFIG_CPU5_WDT=mCONFIG_SMSC_SCH311X_WDT=mCONFIG_SMSC37B787_WDT=mCONFIG_TQMX86_WDT=mCONFIG_VIA_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=mCONFIG_SBC_EPX_C3_WATCHDOG=mCONFIG_INTEL_MEI_WDT=mCONFIG_NI903X_WDT=mCONFIG_NIC7018_WDT=mCONFIG_MEN_A21_WDT=mCONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_SSB_POSSIBLE=yCONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_BLOCKIO=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=yCONFIG_SSB_B43_PCI_BRIDGE=yCONFIG_SSB_PCMCIAHOST_POSSIBLE=yCONFIG_SSB_PCMCIAHOST=yCONFIG_SSB_SDIOHOST_POSSIBLE=yCONFIG_SSB_SDIOHOST=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=yCONFIG_SSB_DRIVER_GPIO=yCONFIG_BCMA_POSSIBLE=yCONFIG_BCMA=mCONFIG_BCMA_BLOCKIO=yCONFIG_BCMA_HOST_PCI_POSSIBLE=yCONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not setCONFIG_BCMA_DRIVER_PCI=yCONFIG_BCMA_DRIVER_GMAC_CMN=yCONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=yCONFIG_MFD_AS3711=yCONFIG_PMIC_ADP5520=yCONFIG_MFD_AAT2870_CORE=yCONFIG_MFD_BCM590XX=mCONFIG_MFD_BD9571MWV=mCONFIG_MFD_AXP20X=mCONFIG_MFD_AXP20X_I2C=mCONFIG_MFD_CROS_EC_DEV=mCONFIG_MFD_MADERA=mCONFIG_MFD_MADERA_I2C=mCONFIG_MFD_MADERA_SPI=mCONFIG_MFD_CS47L15=yCONFIG_MFD_CS47L35=yCONFIG_MFD_CS47L85=yCONFIG_MFD_CS47L90=yCONFIG_MFD_CS47L92=yCONFIG_PMIC_DA903X=yCONFIG_PMIC_DA9052=yCONFIG_MFD_DA9052_SPI=yCONFIG_MFD_DA9052_I2C=yCONFIG_MFD_DA9055=yCONFIG_MFD_DA9062=mCONFIG_MFD_DA9063=mCONFIG_MFD_DA9150=mCONFIG_MFD_DLN2=mCONFIG_MFD_MC13XXX=mCONFIG_MFD_MC13XXX_SPI=mCONFIG_MFD_MC13XXX_I2C=mCONFIG_MFD_MP2629=mCONFIG_HTC_PASIC3=mCONFIG_HTC_I2CPLD=yCONFIG_MFD_INTEL_QUARK_I2C_GPIO=mCONFIG_LPC_ICH=mCONFIG_LPC_SCH=mCONFIG_INTEL_SOC_PMIC=yCONFIG_INTEL_SOC_PMIC_BXTWC=mCONFIG_INTEL_SOC_PMIC_CHTWC=yCONFIG_INTEL_SOC_PMIC_CHTDC_TI=mCONFIG_INTEL_SOC_PMIC_MRFLD=mCONFIG_MFD_INTEL_LPSS=mCONFIG_MFD_INTEL_LPSS_ACPI=mCONFIG_MFD_INTEL_LPSS_PCI=mCONFIG_MFD_INTEL_PMC_BXT=mCONFIG_MFD_INTEL_PMT=mCONFIG_MFD_IQS62X=mCONFIG_MFD_JANZ_CMODIO=mCONFIG_MFD_KEMPLD=mCONFIG_MFD_88PM800=mCONFIG_MFD_88PM805=mCONFIG_MFD_88PM860X=yCONFIG_MFD_MAX14577=mCONFIG_MFD_MAX77693=mCONFIG_MFD_MAX77843=yCONFIG_MFD_MAX8907=mCONFIG_MFD_MAX8925=yCONFIG_MFD_MAX8997=yCONFIG_MFD_MAX8998=yCONFIG_MFD_MT6360=mCONFIG_MFD_MT6397=mCONFIG_MFD_MENF21BMC=mCONFIG_EZX_PCAP=yCONFIG_MFD_VIPERBOARD=mCONFIG_MFD_RETU=mCONFIG_MFD_PCF50633=mCONFIG_PCF50633_ADC=mCONFIG_PCF50633_GPIO=mCONFIG_UCB1400_CORE=mCONFIG_MFD_RDC321X=mCONFIG_MFD_RT5033=mCONFIG_MFD_RC5T583=yCONFIG_MFD_SEC_CORE=yCONFIG_MFD_SI476X_CORE=mCONFIG_MFD_SM501=mCONFIG_MFD_SM501_GPIO=yCONFIG_MFD_SKY81452=mCONFIG_ABX500_CORE=yCONFIG_AB3100_CORE=yCONFIG_AB3100_OTP=yCONFIG_MFD_SYSCON=yCONFIG_MFD_TI_AM335X_TSCADC=mCONFIG_MFD_LP3943=mCONFIG_MFD_LP8788=yCONFIG_MFD_TI_LMU=mCONFIG_MFD_PALMAS=yCONFIG_TPS6105X=mCONFIG_TPS65010=mCONFIG_TPS6507X=mCONFIG_MFD_TPS65086=mCONFIG_MFD_TPS65090=yCONFIG_MFD_TPS68470=yCONFIG_MFD_TI_LP873X=mCONFIG_MFD_TPS6586X=yCONFIG_MFD_TPS65910=yCONFIG_MFD_TPS65912=mCONFIG_MFD_TPS65912_I2C=mCONFIG_MFD_TPS65912_SPI=mCONFIG_MFD_TPS80031=yCONFIG_TWL4030_CORE=yCONFIG_MFD_TWL4030_AUDIO=yCONFIG_TWL6040_CORE=yCONFIG_MFD_WL1273_CORE=mCONFIG_MFD_LM3533=mCONFIG_MFD_TQMX86=mCONFIG_MFD_VX855=mCONFIG_MFD_ARIZONA=yCONFIG_MFD_ARIZONA_I2C=mCONFIG_MFD_ARIZONA_SPI=mCONFIG_MFD_CS47L24=yCONFIG_MFD_WM5102=yCONFIG_MFD_WM5110=yCONFIG_MFD_WM8997=yCONFIG_MFD_WM8998=yCONFIG_MFD_WM8400=yCONFIG_MFD_WM831X=yCONFIG_MFD_WM831X_I2C=yCONFIG_MFD_WM831X_SPI=yCONFIG_MFD_WM8350=yCONFIG_MFD_WM8350_I2C=yCONFIG_MFD_WM8994=mCONFIG_MFD_WCD934X=mCONFIG_RAVE_SP_CORE=mCONFIG_MFD_INTEL_M10_BMC=m
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not setCONFIG_REGULATOR_FIXED_VOLTAGE=mCONFIG_REGULATOR_VIRTUAL_CONSUMER=mCONFIG_REGULATOR_USERSPACE_CONSUMER=mCONFIG_REGULATOR_88PG86X=mCONFIG_REGULATOR_88PM800=mCONFIG_REGULATOR_88PM8607=mCONFIG_REGULATOR_ACT8865=mCONFIG_REGULATOR_AD5398=mCONFIG_REGULATOR_AAT2870=mCONFIG_REGULATOR_ARIZONA_LDO1=mCONFIG_REGULATOR_ARIZONA_MICSUPP=mCONFIG_REGULATOR_AS3711=mCONFIG_REGULATOR_AXP20X=mCONFIG_REGULATOR_BCM590XX=mCONFIG_REGULATOR_BD9571MWV=mCONFIG_REGULATOR_DA903X=mCONFIG_REGULATOR_DA9052=mCONFIG_REGULATOR_DA9055=mCONFIG_REGULATOR_DA9062=mCONFIG_REGULATOR_DA9210=mCONFIG_REGULATOR_DA9211=mCONFIG_REGULATOR_FAN53555=mCONFIG_REGULATOR_GPIO=mCONFIG_REGULATOR_ISL9305=mCONFIG_REGULATOR_ISL6271A=mCONFIG_REGULATOR_LM363X=mCONFIG_REGULATOR_LP3971=mCONFIG_REGULATOR_LP3972=mCONFIG_REGULATOR_LP872X=mCONFIG_REGULATOR_LP8755=mCONFIG_REGULATOR_LP8788=mCONFIG_REGULATOR_LTC3589=mCONFIG_REGULATOR_LTC3676=mCONFIG_REGULATOR_MAX14577=mCONFIG_REGULATOR_MAX1586=mCONFIG_REGULATOR_MAX8649=mCONFIG_REGULATOR_MAX8660=mCONFIG_REGULATOR_MAX8907=mCONFIG_REGULATOR_MAX8925=mCONFIG_REGULATOR_MAX8952=mCONFIG_REGULATOR_MAX8997=mCONFIG_REGULATOR_MAX8998=mCONFIG_REGULATOR_MAX77693=mCONFIG_REGULATOR_MAX77826=mCONFIG_REGULATOR_MC13XXX_CORE=mCONFIG_REGULATOR_MC13783=mCONFIG_REGULATOR_MC13892=mCONFIG_REGULATOR_MP8859=mCONFIG_REGULATOR_MT6311=mCONFIG_REGULATOR_MT6323=mCONFIG_REGULATOR_MT6358=mCONFIG_REGULATOR_MT6360=mCONFIG_REGULATOR_MT6397=mCONFIG_REGULATOR_PALMAS=mCONFIG_REGULATOR_PCA9450=mCONFIG_REGULATOR_PCAP=mCONFIG_REGULATOR_PCF50633=mCONFIG_REGULATOR_PV88060=mCONFIG_REGULATOR_PV88080=mCONFIG_REGULATOR_PV88090=mCONFIG_REGULATOR_PWM=mCONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=mCONFIG_REGULATOR_RC5T583=mCONFIG_REGULATOR_RT4801=mCONFIG_REGULATOR_RT5033=mCONFIG_REGULATOR_RTMV20=mCONFIG_REGULATOR_S2MPA01=mCONFIG_REGULATOR_S2MPS11=mCONFIG_REGULATOR_S5M8767=mCONFIG_REGULATOR_SKY81452=mCONFIG_REGULATOR_SLG51000=mCONFIG_REGULATOR_TPS51632=mCONFIG_REGULATOR_TPS6105X=mCONFIG_REGULATOR_TPS62360=mCONFIG_REGULATOR_TPS65023=mCONFIG_REGULATOR_TPS6507X=mCONFIG_REGULATOR_TPS65086=mCONFIG_REGULATOR_TPS65090=mCONFIG_REGULATOR_TPS65132=mCONFIG_REGULATOR_TPS6524X=mCONFIG_REGULATOR_TPS6586X=mCONFIG_REGULATOR_TPS65910=mCONFIG_REGULATOR_TPS65912=mCONFIG_REGULATOR_TPS80031=mCONFIG_REGULATOR_TWL4030=mCONFIG_REGULATOR_WM831X=mCONFIG_REGULATOR_WM8350=mCONFIG_REGULATOR_WM8400=mCONFIG_REGULATOR_WM8994=mCONFIG_RC_CORE=yCONFIG_RC_MAP=mCONFIG_LIRC=yCONFIG_BPF_LIRC_MODE2=yCONFIG_RC_DECODERS=yCONFIG_IR_NEC_DECODER=mCONFIG_IR_RC5_DECODER=mCONFIG_IR_RC6_DECODER=mCONFIG_IR_JVC_DECODER=mCONFIG_IR_SONY_DECODER=mCONFIG_IR_SANYO_DECODER=mCONFIG_IR_SHARP_DECODER=mCONFIG_IR_MCE_KBD_DECODER=mCONFIG_IR_XMP_DECODER=mCONFIG_IR_IMON_DECODER=mCONFIG_IR_RCMM_DECODER=mCONFIG_RC_DEVICES=yCONFIG_RC_ATI_REMOTE=mCONFIG_IR_ENE=mCONFIG_IR_IMON=mCONFIG_IR_IMON_RAW=mCONFIG_IR_MCEUSB=mCONFIG_IR_ITE_CIR=mCONFIG_IR_FINTEK=mCONFIG_IR_NUVOTON=mCONFIG_IR_REDRAT3=mCONFIG_IR_STREAMZAP=mCONFIG_IR_WINBOND_CIR=mCONFIG_IR_IGORPLUGUSB=mCONFIG_IR_IGUANA=mCONFIG_IR_TTUSBIR=mCONFIG_RC_LOOPBACK=mCONFIG_IR_SERIAL=mCONFIG_IR_SERIAL_TRANSMITTER=yCONFIG_IR_SIR=mCONFIG_RC_XBOX_DVD=mCONFIG_IR_TOY=mCONFIG_CEC_CORE=mCONFIG_CEC_NOTIFIER=yCONFIG_CEC_PIN=yCONFIG_MEDIA_CEC_RC=y
# CONFIG_CEC_PIN_ERROR_INJ is not setCONFIG_MEDIA_CEC_SUPPORT=yCONFIG_CEC_CH7322=mCONFIG_CEC_CROS_EC=mCONFIG_CEC_GPIO=mCONFIG_CEC_SECO=mCONFIG_CEC_SECO_RC=yCONFIG_USB_PULSE8_CEC=mCONFIG_USB_RAINSHADOW_CEC=mCONFIG_MEDIA_SUPPORT=mCONFIG_MEDIA_SUPPORT_FILTER=yCONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#CONFIG_MEDIA_CAMERA_SUPPORT=yCONFIG_MEDIA_ANALOG_TV_SUPPORT=yCONFIG_MEDIA_DIGITAL_TV_SUPPORT=yCONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not setCONFIG_MEDIA_PLATFORM_SUPPORT=yCONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
CONFIG_VIDEO_DEV=mCONFIG_MEDIA_CONTROLLER=yCONFIG_DVB_CORE=m
#
# Video4Linux options
#CONFIG_VIDEO_V4L2=mCONFIG_VIDEO_V4L2_I2C=yCONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_VIDEO_TUNER=mCONFIG_V4L2_MEM2MEM_DEV=mCONFIG_V4L2_FLASH_LED_CLASS=mCONFIG_V4L2_FWNODE=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEOBUF_VMALLOC=m
# end of Video4Linux options
#
# Media controller options
#CONFIG_MEDIA_CONTROLLER_DVB=yCONFIG_MEDIA_CONTROLLER_REQUEST_API=y
#
# Please notice that the enabled Media controller Request API is EXPERIMENTAL #
# end of Media controller options
#
# Digital TV options
#CONFIG_DVB_MMAP=yCONFIG_DVB_NET=yCONFIG_DVB_MAX_ADAPTERS=16CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers' #CONFIG_TTPCI_EEPROM=m CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#CONFIG_USB_VIDEO_CLASS=mCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=yCONFIG_USB_GSPCA=mCONFIG_USB_M5602=mCONFIG_USB_STV06XX=mCONFIG_USB_GL860=mCONFIG_USB_GSPCA_BENQ=mCONFIG_USB_GSPCA_CONEX=mCONFIG_USB_GSPCA_CPIA1=mCONFIG_USB_GSPCA_DTCS033=mCONFIG_USB_GSPCA_ETOMS=mCONFIG_USB_GSPCA_FINEPIX=mCONFIG_USB_GSPCA_JEILINJ=mCONFIG_USB_GSPCA_JL2005BCD=mCONFIG_USB_GSPCA_KINECT=mCONFIG_USB_GSPCA_KONICA=mCONFIG_USB_GSPCA_MARS=mCONFIG_USB_GSPCA_MR97310A=mCONFIG_USB_GSPCA_NW80X=mCONFIG_USB_GSPCA_OV519=mCONFIG_USB_GSPCA_OV534=mCONFIG_USB_GSPCA_OV534_9=mCONFIG_USB_GSPCA_PAC207=mCONFIG_USB_GSPCA_PAC7302=mCONFIG_USB_GSPCA_PAC7311=mCONFIG_USB_GSPCA_SE401=mCONFIG_USB_GSPCA_SN9C2028=mCONFIG_USB_GSPCA_SN9C20X=mCONFIG_USB_GSPCA_SONIXB=mCONFIG_USB_GSPCA_SONIXJ=mCONFIG_USB_GSPCA_SPCA500=mCONFIG_USB_GSPCA_SPCA501=mCONFIG_USB_GSPCA_SPCA505=mCONFIG_USB_GSPCA_SPCA506=mCONFIG_USB_GSPCA_SPCA508=mCONFIG_USB_GSPCA_SPCA561=mCONFIG_USB_GSPCA_SPCA1528=mCONFIG_USB_GSPCA_SQ905=mCONFIG_USB_GSPCA_SQ905C=mCONFIG_USB_GSPCA_SQ930X=mCONFIG_USB_GSPCA_STK014=mCONFIG_USB_GSPCA_STK1135=mCONFIG_USB_GSPCA_STV0680=mCONFIG_USB_GSPCA_SUNPLUS=mCONFIG_USB_GSPCA_T613=mCONFIG_USB_GSPCA_TOPRO=mCONFIG_USB_GSPCA_TOUPTEK=mCONFIG_USB_GSPCA_TV8532=mCONFIG_USB_GSPCA_VC032X=mCONFIG_USB_GSPCA_VICAM=mCONFIG_USB_GSPCA_XIRLINK_CIT=mCONFIG_USB_GSPCA_ZC3XX=mCONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not setCONFIG_USB_PWC_INPUT_EVDEV=yCONFIG_VIDEO_CPIA2=mCONFIG_USB_ZR364XX=mCONFIG_USB_STKWEBCAM=mCONFIG_USB_S2255=mCONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
#CONFIG_VIDEO_PVRUSB2=mCONFIG_VIDEO_PVRUSB2_SYSFS=yCONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not setCONFIG_VIDEO_HDPVR=mCONFIG_VIDEO_STK1160_COMMON=mCONFIG_VIDEO_STK1160=mCONFIG_VIDEO_GO7007=mCONFIG_VIDEO_GO7007_USB=mCONFIG_VIDEO_GO7007_LOADER=mCONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
#
# Analog/digital TV USB devices
#CONFIG_VIDEO_AU0828=mCONFIG_VIDEO_AU0828_V4L2=yCONFIG_VIDEO_AU0828_RC=yCONFIG_VIDEO_CX231XX=mCONFIG_VIDEO_CX231XX_RC=yCONFIG_VIDEO_CX231XX_ALSA=mCONFIG_VIDEO_CX231XX_DVB=mCONFIG_VIDEO_TM6000=mCONFIG_VIDEO_TM6000_ALSA=mCONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not setCONFIG_DVB_USB_DIB3000MC=mCONFIG_DVB_USB_A800=mCONFIG_DVB_USB_DIBUSB_MB=mCONFIG_DVB_USB_DIBUSB_MB_FAULTY=yCONFIG_DVB_USB_DIBUSB_MC=mCONFIG_DVB_USB_DIB0700=mCONFIG_DVB_USB_UMT_010=mCONFIG_DVB_USB_CXUSB=mCONFIG_DVB_USB_CXUSB_ANALOG=yCONFIG_DVB_USB_M920X=mCONFIG_DVB_USB_DIGITV=mCONFIG_DVB_USB_VP7045=mCONFIG_DVB_USB_VP702X=mCONFIG_DVB_USB_GP8PSK=mCONFIG_DVB_USB_NOVA_T_USB2=mCONFIG_DVB_USB_TTUSB2=mCONFIG_DVB_USB_DTT200U=mCONFIG_DVB_USB_OPERA1=mCONFIG_DVB_USB_AF9005=mCONFIG_DVB_USB_AF9005_REMOTE=mCONFIG_DVB_USB_PCTV452E=mCONFIG_DVB_USB_DW2102=mCONFIG_DVB_USB_CINERGY_T2=mCONFIG_DVB_USB_DTV5100=mCONFIG_DVB_USB_AZ6027=mCONFIG_DVB_USB_TECHNISAT_USB2=mCONFIG_DVB_USB_V2=mCONFIG_DVB_USB_AF9015=mCONFIG_DVB_USB_AF9035=mCONFIG_DVB_USB_ANYSEE=mCONFIG_DVB_USB_AU6610=mCONFIG_DVB_USB_AZ6007=mCONFIG_DVB_USB_CE6230=mCONFIG_DVB_USB_EC168=mCONFIG_DVB_USB_GL861=mCONFIG_DVB_USB_LME2510=mCONFIG_DVB_USB_MXL111SF=mCONFIG_DVB_USB_RTL28XXU=mCONFIG_DVB_USB_DVBSKY=mCONFIG_DVB_USB_ZD1301=mCONFIG_DVB_TTUSB_BUDGET=mCONFIG_DVB_TTUSB_DEC=mCONFIG_SMS_USB_DRV=mCONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not setCONFIG_DVB_AS102=m
#
# Webcam, TV (analog/digital) USB devices
#CONFIG_VIDEO_EM28XX=mCONFIG_VIDEO_EM28XX_V4L2=mCONFIG_VIDEO_EM28XX_ALSA=mCONFIG_VIDEO_EM28XX_DVB=mCONFIG_VIDEO_EM28XX_RC=mCONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#CONFIG_VIDEO_MEYE=mCONFIG_VIDEO_SOLO6X10=mCONFIG_VIDEO_TW5864=mCONFIG_VIDEO_TW68=mCONFIG_VIDEO_TW686X=m
#
# Media capture/analog TV support
#CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not setCONFIG_VIDEO_IVTV_ALSA=mCONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not setCONFIG_VIDEO_HEXIUM_GEMINI=mCONFIG_VIDEO_HEXIUM_ORION=mCONFIG_VIDEO_MXB=mCONFIG_VIDEO_DT3155=m
#
# Media capture/analog/hybrid TV support
#CONFIG_VIDEO_CX18=mCONFIG_VIDEO_CX18_ALSA=mCONFIG_VIDEO_CX23885=mCONFIG_MEDIA_ALTERA_CI=mCONFIG_VIDEO_CX25821=mCONFIG_VIDEO_CX25821_ALSA=mCONFIG_VIDEO_CX88=mCONFIG_VIDEO_CX88_ALSA=mCONFIG_VIDEO_CX88_BLACKBIRD=mCONFIG_VIDEO_CX88_DVB=mCONFIG_VIDEO_CX88_ENABLE_VP3054=yCONFIG_VIDEO_CX88_VP3054=mCONFIG_VIDEO_CX88_MPEG=mCONFIG_VIDEO_BT848=mCONFIG_DVB_BT8XX=mCONFIG_VIDEO_SAA7134=mCONFIG_VIDEO_SAA7134_ALSA=mCONFIG_VIDEO_SAA7134_RC=yCONFIG_VIDEO_SAA7134_DVB=mCONFIG_VIDEO_SAA7134_GO7007=mCONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#CONFIG_DVB_AV7110_IR=yCONFIG_DVB_AV7110=mCONFIG_DVB_AV7110_OSD=yCONFIG_DVB_BUDGET_CORE=mCONFIG_DVB_BUDGET=mCONFIG_DVB_BUDGET_CI=mCONFIG_DVB_BUDGET_AV=mCONFIG_DVB_BUDGET_PATCH=mCONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not setCONFIG_DVB_PLUTO2=mCONFIG_DVB_DM1105=mCONFIG_DVB_PT1=mCONFIG_DVB_PT3=mCONFIG_MANTIS_CORE=mCONFIG_DVB_MANTIS=mCONFIG_DVB_HOPPER=mCONFIG_DVB_NGENE=mCONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not setCONFIG_DVB_SMIPCIE=mCONFIG_DVB_NETUP_UNIDVB=mCONFIG_VIDEO_IPU3_CIO2=mCONFIG_CIO2_BRIDGE=yCONFIG_RADIO_ADAPTERS=yCONFIG_RADIO_TEA575X=mCONFIG_RADIO_SI470X=mCONFIG_USB_SI470X=mCONFIG_I2C_SI470X=mCONFIG_RADIO_SI4713=mCONFIG_USB_SI4713=mCONFIG_PLATFORM_SI4713=mCONFIG_I2C_SI4713=mCONFIG_RADIO_SI476X=mCONFIG_USB_MR800=mCONFIG_USB_DSBR=mCONFIG_RADIO_MAXIRADIO=mCONFIG_RADIO_SHARK=mCONFIG_RADIO_SHARK2=mCONFIG_USB_KEENE=mCONFIG_USB_RAREMONO=mCONFIG_USB_MA901=mCONFIG_RADIO_TEA5764=mCONFIG_RADIO_SAA7706H=mCONFIG_RADIO_TEF6862=mCONFIG_RADIO_WL1273=mCONFIG_RADIO_WL128X=mCONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options # CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_TVEEPROM=m CONFIG_CYPRESS_FIRMWARE=m CONFIG_VIDEOBUF2_CORE=m CONFIG_VIDEOBUF2_V4L2=m CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_DMA_CONTIG=m CONFIG_VIDEOBUF2_VMALLOC=m CONFIG_VIDEOBUF2_DMA_SG=m CONFIG_VIDEOBUF2_DVB=m CONFIG_DVB_B2C2_FLEXCOP=m CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_SIANO_RC=y # CONFIG_SMS_SIANO_DEBUGFS is not set CONFIG_VIDEO_V4L2_TPG=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_CAFE_CCIC=m CONFIG_VIDEO_CADENCE=y CONFIG_VIDEO_CADENCE_CSI2RX=m CONFIG_VIDEO_CADENCE_CSI2TX=m CONFIG_VIDEO_ASPEED=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m CONFIG_DVB_PLATFORM_DRIVERS=y
#
# MMC/SDIO DVB adapters
#CONFIG_SMS_SDIO_DRV=mCONFIG_V4L_TEST_DRIVERS=yCONFIG_VIDEO_VIMC=mCONFIG_VIDEO_VIVID=mCONFIG_VIDEO_VIVID_CEC=yCONFIG_VIDEO_VIVID_MAX_DEVS=64CONFIG_VIDEO_VIM2M=mCONFIG_VIDEO_VICODEC=mCONFIG_DVB_TEST_DRIVERS=yCONFIG_DVB_VIDTV=m
#
# FireWire (IEEE 1394) Adapters
#CONFIG_DVB_FIREDTV=mCONFIG_DVB_FIREDTV_INPUT=y
# end of Media drivers
CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y
#
# Media ancillary drivers
#CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers' #CONFIG_VIDEO_IR_I2C=m
#
# audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers' #CONFIG_VIDEO_TVAUDIO=mCONFIG_VIDEO_TDA7432=mCONFIG_VIDEO_TDA9840=mCONFIG_VIDEO_TEA6415C=mCONFIG_VIDEO_TEA6420=mCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_CS3308=mCONFIG_VIDEO_CS5345=mCONFIG_VIDEO_CS53L32A=mCONFIG_VIDEO_UDA1342=mCONFIG_VIDEO_WM8775=mCONFIG_VIDEO_WM8739=mCONFIG_VIDEO_VP27SMPX=mCONFIG_VIDEO_SONY_BTF_MPX=mCONFIG_VIDEO_SAA6588=mCONFIG_VIDEO_SAA711X=mCONFIG_VIDEO_TVP5150=mCONFIG_VIDEO_TW2804=mCONFIG_VIDEO_TW9903=mCONFIG_VIDEO_TW9906=m
#
# Video and audio decoders
#CONFIG_VIDEO_SAA717X=mCONFIG_VIDEO_CX25840=mCONFIG_VIDEO_SAA7127=mCONFIG_VIDEO_UPD64031A=mCONFIG_VIDEO_UPD64083=mCONFIG_VIDEO_SAA6752HS=mCONFIG_VIDEO_M52790=m
#
# Camera sensor devices
#CONFIG_VIDEO_APTINA_PLL=mCONFIG_VIDEO_CCS_PLL=mCONFIG_VIDEO_HI556=mCONFIG_VIDEO_IMX214=mCONFIG_VIDEO_IMX219=mCONFIG_VIDEO_IMX258=mCONFIG_VIDEO_IMX274=mCONFIG_VIDEO_IMX290=mCONFIG_VIDEO_IMX319=mCONFIG_VIDEO_IMX355=mCONFIG_VIDEO_OV02A10=mCONFIG_VIDEO_OV2640=mCONFIG_VIDEO_OV2659=mCONFIG_VIDEO_OV2680=mCONFIG_VIDEO_OV2685=mCONFIG_VIDEO_OV2740=mCONFIG_VIDEO_OV5647=mCONFIG_VIDEO_OV5648=mCONFIG_VIDEO_OV6650=mCONFIG_VIDEO_OV5670=mCONFIG_VIDEO_OV5675=mCONFIG_VIDEO_OV5695=mCONFIG_VIDEO_OV7251=mCONFIG_VIDEO_OV772X=mCONFIG_VIDEO_OV7640=mCONFIG_VIDEO_OV7670=mCONFIG_VIDEO_OV7740=mCONFIG_VIDEO_OV8856=mCONFIG_VIDEO_OV8865=mCONFIG_VIDEO_OV9640=mCONFIG_VIDEO_OV9650=mCONFIG_VIDEO_OV9734=mCONFIG_VIDEO_OV13858=mCONFIG_VIDEO_VS6624=mCONFIG_VIDEO_MT9M001=mCONFIG_VIDEO_MT9M032=mCONFIG_VIDEO_MT9M111=mCONFIG_VIDEO_MT9P031=mCONFIG_VIDEO_MT9T001=mCONFIG_VIDEO_MT9T112=mCONFIG_VIDEO_MT9V011=mCONFIG_VIDEO_MT9V032=mCONFIG_VIDEO_MT9V111=mCONFIG_VIDEO_SR030PC30=mCONFIG_VIDEO_NOON010PC30=mCONFIG_VIDEO_M5MOLS=mCONFIG_VIDEO_MAX9271_LIB=mCONFIG_VIDEO_RDACM20=mCONFIG_VIDEO_RDACM21=mCONFIG_VIDEO_RJ54N1=mCONFIG_VIDEO_S5K6AA=mCONFIG_VIDEO_S5K6A3=mCONFIG_VIDEO_S5K4ECGX=mCONFIG_VIDEO_S5K5BAF=mCONFIG_VIDEO_CCS=mCONFIG_VIDEO_ET8EK8=mCONFIG_VIDEO_S5C73M3=m
# end of Camera sensor devices
#
# Lens drivers
#CONFIG_VIDEO_AD5820=mCONFIG_VIDEO_AK7375=mCONFIG_VIDEO_DW9714=mCONFIG_VIDEO_DW9768=mCONFIG_VIDEO_DW9807_VCM=m
# end of Lens drivers
#
# Flash devices
#CONFIG_VIDEO_ADP1653=mCONFIG_VIDEO_LM3560=mCONFIG_VIDEO_LM3646=m
# end of Flash devices
#
# SPI I2C drivers auto-selected by 'Autoselect ancillary drivers' #
#
# Media SPI Adapters
#CONFIG_CXD2880_SPI_DRV=m
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Tuner drivers auto-selected by 'Autoselect ancillary drivers' #CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA18250=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_MT2060=m CONFIG_MEDIA_TUNER_MT2063=m CONFIG_MEDIA_TUNER_MT2266=m CONFIG_MEDIA_TUNER_MT2131=m CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_XC4000=m CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_MEDIA_TUNER_TDA18218=m CONFIG_MEDIA_TUNER_FC0011=m CONFIG_MEDIA_TUNER_FC0012=m CONFIG_MEDIA_TUNER_FC0013=m CONFIG_MEDIA_TUNER_TDA18212=m CONFIG_MEDIA_TUNER_E4000=m CONFIG_MEDIA_TUNER_FC2580=m CONFIG_MEDIA_TUNER_M88RS6000T=m CONFIG_MEDIA_TUNER_TUA9001=m CONFIG_MEDIA_TUNER_SI2157=m CONFIG_MEDIA_TUNER_IT913X=m CONFIG_MEDIA_TUNER_R820T=m CONFIG_MEDIA_TUNER_MXL301RF=m CONFIG_MEDIA_TUNER_QM1D1C0042=m CONFIG_MEDIA_TUNER_QM1D1B0004=m
#
# DVB Frontend drivers auto-selected by 'Autoselect ancillary drivers' #
#
# Multistandard (satellite) frontends
#CONFIG_DVB_STB0899=mCONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=mCONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=mCONFIG_DVB_STV6111=mCONFIG_DVB_MXL5XX=mCONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#CONFIG_DVB_DRXK=mCONFIG_DVB_TDA18271C2DD=mCONFIG_DVB_SI2165=mCONFIG_DVB_MN88472=mCONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#CONFIG_DVB_CX24110=mCONFIG_DVB_CX24123=mCONFIG_DVB_MT312=mCONFIG_DVB_ZL10036=mCONFIG_DVB_ZL10039=mCONFIG_DVB_S5H1420=mCONFIG_DVB_STV0288=mCONFIG_DVB_STB6000=mCONFIG_DVB_STV0299=mCONFIG_DVB_STV6110=mCONFIG_DVB_STV0900=mCONFIG_DVB_TDA8083=mCONFIG_DVB_TDA10086=mCONFIG_DVB_TDA8261=mCONFIG_DVB_VES1X93=mCONFIG_DVB_TUNER_ITD1000=mCONFIG_DVB_TUNER_CX24113=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TUA6100=mCONFIG_DVB_CX24116=mCONFIG_DVB_CX24117=mCONFIG_DVB_CX24120=mCONFIG_DVB_SI21XX=mCONFIG_DVB_TS2020=mCONFIG_DVB_DS3000=mCONFIG_DVB_MB86A16=mCONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=mCONFIG_DVB_CX22700=mCONFIG_DVB_CX22702=mCONFIG_DVB_DRXD=mCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=mCONFIG_DVB_ZL10353=mCONFIG_DVB_DIB3000MB=mCONFIG_DVB_DIB3000MC=mCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=mCONFIG_DVB_TDA10048=mCONFIG_DVB_AF9013=mCONFIG_DVB_EC100=mCONFIG_DVB_STV0367=mCONFIG_DVB_CXD2820R=mCONFIG_DVB_CXD2841ER=mCONFIG_DVB_RTL2830=mCONFIG_DVB_RTL2832=mCONFIG_DVB_SI2168=mCONFIG_DVB_AS102_FE=mCONFIG_DVB_ZD1301_DEMOD=mCONFIG_DVB_GP8PSK_FE=m
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=mCONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=mCONFIG_DVB_OR51211=mCONFIG_DVB_OR51132=mCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=mCONFIG_DVB_LGDT3305=mCONFIG_DVB_LGDT3306A=mCONFIG_DVB_LG2160=mCONFIG_DVB_S5H1409=mCONFIG_DVB_AU8522=mCONFIG_DVB_AU8522_DTV=mCONFIG_DVB_AU8522_V4L=mCONFIG_DVB_S5H1411=mCONFIG_DVB_MXL692=m
#
# ISDB-T (terrestrial) frontends
#CONFIG_DVB_S921=mCONFIG_DVB_DIB8000=mCONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends #CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=mCONFIG_DVB_TUNER_DIB0070=mCONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#CONFIG_DVB_DRX39XYJ=mCONFIG_DVB_LNBH25=mCONFIG_DVB_LNBP21=mCONFIG_DVB_LNBP22=mCONFIG_DVB_ISL6405=mCONFIG_DVB_ISL6421=mCONFIG_DVB_ISL6423=mCONFIG_DVB_A8293=mCONFIG_DVB_LGS8GXX=mCONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=mCONFIG_DVB_IX2505V=mCONFIG_DVB_M88RS2000=mCONFIG_DVB_AF9033=mCONFIG_DVB_HORUS3A=mCONFIG_DVB_ASCOT2E=mCONFIG_DVB_HELENE=m
#
# Common Interface (EN50221) controller drivers
#CONFIG_DVB_CXD2099=mCONFIG_DVB_SP2=m
#
# Tools to develop new frontends
#CONFIG_DVB_DUMMY_FE=m
# end of Media ancillary drivers
#
# Graphics support
#CONFIG_AGP=mCONFIG_AGP_AMD64=mCONFIG_AGP_INTEL=mCONFIG_AGP_SIS=mCONFIG_AGP_VIA=mCONFIG_INTEL_GTT=mCONFIG_VGA_ARB=yCONFIG_VGA_ARB_MAX_GPUS=10CONFIG_VGA_SWITCHEROO=yCONFIG_DRM=mCONFIG_DRM_MIPI_DBI=mCONFIG_DRM_MIPI_DSI=yCONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not setCONFIG_DRM_KMS_HELPER=mCONFIG_DRM_KMS_FB_HELPER=yCONFIG_DRM_FBDEV_EMULATION=yCONFIG_DRM_FBDEV_OVERALLOC=100CONFIG_DRM_LOAD_EDID_FIRMWARE=yCONFIG_DRM_DP_CEC=yCONFIG_DRM_TTM=mCONFIG_DRM_VRAM_HELPER=mCONFIG_DRM_TTM_HELPER=mCONFIG_DRM_GEM_CMA_HELPER=yCONFIG_DRM_KMS_CMA_HELPER=yCONFIG_DRM_GEM_SHMEM_HELPER=yCONFIG_DRM_SCHED=m
#
# I2C encoder or helper chips
#CONFIG_DRM_I2C_CH7006=mCONFIG_DRM_I2C_SIL164=mCONFIG_DRM_I2C_NXP_TDA998X=mCONFIG_DRM_I2C_NXP_TDA9950=m
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=mCONFIG_DRM_RADEON_USERPTR=yCONFIG_DRM_AMDGPU=mCONFIG_DRM_AMDGPU_SI=yCONFIG_DRM_AMDGPU_CIK=yCONFIG_DRM_AMDGPU_USERPTR=y
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#CONFIG_DRM_AMD_DC=yCONFIG_DRM_AMD_DC_DCN=yCONFIG_DRM_AMD_DC_HDCP=yCONFIG_DRM_AMD_DC_SI=y
# end of Display Engine Configuration
4,096 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Will Deacon
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Hi Nathan,
Quoted 42 lines · Nathan Chancellor
Quoted 41 lines · Will Deacon
Quoted 30 lines · Nathan Chancellor
Quoted 29 lines · Will Deacon
Quoted 6 lines · Claire Chang
BUG: unable to handle page fault for address: 00000000003a8290and the fact it crashed at_raw_spin_lock_irqsavelook like the memory (maybedev->dma_io_tlb_mem) was corrupted?
Thedev->dma_io_tlb_memshould be set here
(https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/probe.c#n2528)
throughdevice_initialize.I'm less sure about this. '
dma_io_tlb_mem' should be pointing at 'io_tlb_default_mem', which is a page-aligned allocation from memblock. The spinlock is at offset0x24in that structure, and looking at the register dump from the crash:Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: Call Trace: Jun 29 18:28:42 hp-4300G kernel: _raw_spin_lock_irqsave+0x39/0x50 Jun 29 18:28:42 hp-4300G kernel: swiotlb_tbl_map_single+0x12b/0x4c0Then that correlates with R11 holding the '
dma_io_tlb_mem' pointer and RDX pointing at the spinlock. Yet RAX is holding junk :/Quoted 6 lines
Quoted 3 lines
I agree that enabling KASAN would be a good idea, but I also think we probably need to get some more information out of
swiotlb_tbl_map_single()to see see what exactly is going wrong in there.I can certainly enable KASAN and if there is any debug print I can add or dump anything, let me know!
I bit the bullet and took v5.13 with swiotlb/for-linus-5.14 merged in, built x86 defconfig and ran it on my laptop. However, it seems to work fine!
Quoted 8 lines
Quoted 1 line
Please can you share your .config?
Sure thing, it is attached. It is just Arch Linux's config run through olddefconfig. The original is below in case you need to diff it.
If there is anything more that I can provide, please let me know.
I eventually got this booting (for some reason it was causing LD to SEGV trying to link it for a while...) and sadly it works fine on my laptop. Hmm.
Did you manage to try again with KASAN?
It might also be worth taking the IOMMU out of the equation, since that interfaces differently with SWIOTLB and I couldn't figure out the code path from the log you provided. What happens if you boot with "amd_iommu=off swiotlb=force"?
(although word of warning here: i915 dies horribly on my laptop if I pass swiotlb=force, even with the distro 5.10 kernel)
Will
Robin Murphy
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 57 lines · Will Deacon
Hi Nathan,
Quoted 42 lines · Nathan Chancellor
Quoted 41 lines · Will Deacon
Quoted 30 lines · Nathan Chancellor
Quoted 29 lines · Will Deacon
Quoted 6 lines · Claire Chang
BUG: unable to handle page fault for address: 00000000003a8290and the fact it crashed at_raw_spin_lock_irqsavelook like the memory (maybedev->dma_io_tlb_mem) was corrupted?
Thedev->dma_io_tlb_memshould be set here
(https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/probe.c#n2528)
throughdevice_initialize.I'm less sure about this. '
dma_io_tlb_mem' should be pointing at 'io_tlb_default_mem', which is a page-aligned allocation from memblock. The spinlock is at offset0x24in that structure, and looking at the register dump from the crash:Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: Call Trace: Jun 29 18:28:42 hp-4300G kernel: _raw_spin_lock_irqsave+0x39/0x50 Jun 29 18:28:42 hp-4300G kernel: swiotlb_tbl_map_single+0x12b/0x4c0Then that correlates with R11 holding the '
dma_io_tlb_mem' pointer and RDX pointing at the spinlock. Yet RAX is holding junk :/Quoted 6 lines
Quoted 3 lines
I agree that enabling KASAN would be a good idea, but I also think we probably need to get some more information out of
swiotlb_tbl_map_single()to see see what exactly is going wrong in there.I can certainly enable KASAN and if there is any debug print I can add or dump anything, let me know!
I bit the bullet and took v5.13 with swiotlb/for-linus-5.14 merged in, built x86 defconfig and ran it on my laptop. However, it seems to work fine!
Quoted 8 lines
Quoted 1 line
Please can you share your .config?
Sure thing, it is attached. It is just Arch Linux's config run through olddefconfig. The original is below in case you need to diff it.
If there is anything more that I can provide, please let me know.
I eventually got this booting (for some reason it was causing LD to SEGV trying to link it for a while...) and sadly it works fine on my laptop. Hmm.
Quoted 6 lines
Did you manage to try again with KASAN?
It might also be worth taking the IOMMU out of the equation, since that interfaces differently with SWIOTLB and I couldn't figure out the code path from the log you provided. What happens if you boot with "amd_iommu=off swiotlb=force"?
Oh, now there's a thing... the chat from the IOMMU API in the boot log implies that the IOMMU *should* be in the picture - we see that default domains are IOMMU_DOMAIN_DMA default and the GPU 0000:0c:00.0 was added to a group. That means dev->dma_ops should be set and DMA API calls should be going through iommu-dma, yet the callstack in the crash says we've gone straight from dma_map_page_attrs() to swiotlb_map(), implying the inline dma_direct_map_page() path.
If dev->dma_ops didn't look right in the first place, it's perhaps less surprising that dev->dma_io_tlb_mem might be wild as well. It doesn't seem plausible that we should have a race between initialising the device and probing its driver, so maybe the whole dev pointer is getting trampled earlier in the callchain (or is fundamentally wrong to begin with, but from a quick skim of the amdgpu code it did look like adev->dev and adev->pdev are appropriately set early on by amdgpu_pci_probe()).
Quoted 2 lines
(although word of warning here: i915 dies horribly on my laptop if I pass swiotlb=force, even with the distro 5.10 kernel)
FWIW I'd imagine you probably need to massively increase the SWIOTLB buffer size to have hope of that working.
Robin.
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Hi Will and Robin,
Quoted 51 lines · Robin Murphy
Quoted 50 lines · Will Deacon
Hi Nathan,
Quoted 47 lines · Nathan Chancellor
Quoted 35 lines · Will Deacon
Quoted 34 lines · Nathan Chancellor
Quoted 32 lines · Will Deacon
Quoted 6 lines · Claire Chang
BUG: unable to handle page fault for address: 00000000003a8290and the fact it crashed at_raw_spin_lock_irqsavelook like the memory (maybedev->dma_io_tlb_mem) was corrupted?
Thedev->dma_io_tlb_memshould be set here
(https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/probe.c#n2528)
throughdevice_initialize.I'm less sure about this. '
dma_io_tlb_mem' should be pointing at 'io_tlb_default_mem', which is a page-aligned allocation from memblock. The spinlock is at offset0x24in that structure, and looking at the register dump from the crash:Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: Call Trace: Jun 29 18:28:42 hp-4300G kernel: _raw_spin_lock_irqsave+0x39/0x50 Jun 29 18:28:42 hp-4300G kernel: swiotlb_tbl_map_single+0x12b/0x4c0Then that correlates with R11 holding the '
dma_io_tlb_mem' pointer and RDX pointing at the spinlock. Yet RAX is holding junk :/I agree that enabling KASAN would be a good idea, but I also think we probably need to get some more information out of
swiotlb_tbl_map_single()to see see what exactly is going wrong in there.Quoted 7 lines
Quoted 2 lines
I can certainly enable KASAN and if there is any debug print I can add or dump anything, let me know!
I bit the bullet and took v5.13 with swiotlb/for-linus-5.14 merged in, built x86 defconfig and ran it on my laptop. However, it seems to work fine!
Please can you share your .config?
Sure thing, it is attached. It is just Arch Linux's config run through olddefconfig. The original is below in case you need to diff it.
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
If there is anything more that I can provide, please let me know.
I eventually got this booting (for some reason it was causing LD to SEGV trying to link it for a while...) and sadly it works fine on my laptop. Hmm.
Seems like it might be something specific to the amdgpu module?
Quoted 1 line
Quoted 1 line
Did you manage to try again with KASAN?
Yes, it took a few times to reproduce the issue but I did manage to get a dmesg, please find it attached. I build from commit 7d31f1c65cc9 ("swiotlb:
fix implicit debugfs declarations") in Konrad's tree.
Quoted 21 lines
Quoted 4 lines
It might also be worth taking the IOMMU out of the equation, since that interfaces differently with SWIOTLB and I couldn't figure out the code path from the log you provided. What happens if you boot with "amd_iommu=off swiotlb=force"?
Oh, now there's a thing... the chat from the IOMMU API in the boot log implies that the IOMMU *should* be in the picture - we see that default domains are
IOMMU_DOMAIN_DMAdefault and the GPU 0000:0c:00.0 was added to a group. That meansdev->dma_opsshould be set and DMA API calls should be going through iommu-dma, yet the callstack in the crash says we've gone straight fromdma_map_page_attrs()toswiotlb_map(), implying the inlinedma_direct_map_page()path.If
dev->dma_opsdidn't look right in the first place, it's perhaps less surprising thatdev->dma_io_tlb_memmight be wild as well. It doesn't seem plausible that we should have a race between initialising the device and probing its driver, so maybe the whole dev pointer is getting trampled earlier in the callchain (or is fundamentally wrong to begin with, but from a quick skim of the amdgpu code it did look likeadev->devandadev->pdevare appropriately set early on byamdgpu_pci_probe()).
Quoted 5 lines
Quoted 2 lines
(although word of warning here: i915 dies horribly on my laptop if I pass swiotlb=force, even with the distro 5.10 kernel)
FWIW I'd imagine you probably need to massively increase the SWIOTLB buffer size to have hope of that working.
Is it worth trying this still then?
Cheers,
Nathan
[ 0.000000] Linux version 5.12.0-rc3-debug (nathan@archlinux-ax161) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Fri Jul 2 22:22:23 MST 2021 [ 0.000000] Command line: initrd=\amd-ucode.img initrd=\initramfs-linux-mainline-llvm.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp debug ignore_loglevel earlyprintk=efi,keep log_buf_len=16M [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c0ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009c10000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20d000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000b838ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b8a15000-0x00000000badfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000badff000-0x00000000bbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000021f380000-0x000000023fffffff] reserved [ 0.000000] intel_pstate: HWP disabled [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable [ 0.000000] e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009c0ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000009c10000-0x0000000009ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000000a20d000-0x000000000affffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000b4c66017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b4c66018-0x00000000b4c73457] usable [ 0.000000] reserve setup_data: [mem 0x00000000b4c73458-0x00000000b838ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000b8a15000-0x00000000badfefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000badff000-0x00000000bbffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bc000000-0x00000000bdffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f37ffff] usable [ 0.000000] reserve setup_data: [mem 0x000000021f380000-0x000000023fffffff] reserved [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI=0xb8721000 ACPI 2.0=0xb8721014 TPMFinalLog=0xb89c8000 SMBIOS=0xbac0f000 SMBIOS 3.0=0xbac0e000 MEMATTR=0xb5184018 ESRT=0xb6dde918 RNG=0xbac3e998 TPMEventLog=0xb5185018 [ 0.000000] efi: seeding entropy pool [ 0.000000] SMBIOS 3.3.0 present. [ 0.000000] DMI: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3793.113 MHz processor [ 0.000282] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000289] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000312] last_pfn = 0x21f380 max_arch_pfn = 0x400000000 [ 0.000759] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001796] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.001811] last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.006400] esrt: Reserving ESRT space from 0x00000000b6dde918 to 0x00000000b6dde950. [ 0.006423] e820: update [mem 0xb6dde000-0xb6ddefff] usable ==> reserved [ 0.006833] check: Scanning 1 areas for low memory corruption [ 0.006842] Using GB pages for direct mapping [ 0.028975] printk: log_buf_len: 16777216 bytes [ 0.028982] printk: early log buf free: 123936(94%) [ 0.028986] Secure boot disabled [ 0.028988] RAMDISK: [mem 0x7f7c7000-0x7fff5fff] [ 0.029012] ACPI: Early table checksum verification disabled [ 0.029022] ACPI: RSDP 0x00000000B8721014 000024 (v02 HPQOEM) [ 0.029032] ACPI: XSDT 0x00000000B8720728 0000EC (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.029045] ACPI: FACP 0x00000000B870F000 000114 (v06 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.029059] ACPI: DSDT 0x00000000B86FE000 01050C (v02 HPQOEM SLIC-CPC 01072009 INTL 20120913) [ 0.029068] ACPI: FACS 0x00000000B89F8000 000040 [ 0.029076] ACPI: MSDM 0x00000000B871F000 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.029085] ACPI: SSDT 0x00000000B871E000 000050 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.029093] ACPI: IVRS 0x00000000B871D000 0000D0 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000000) [ 0.029102] ACPI: SSDT 0x00000000B8715000 007229 (v02 HPQOEM SLIC-CPC 00000002 MSFT 04000000) [ 0.029110] ACPI: SSDT 0x00000000B8711000 003BA1 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.029119] ACPI: SSDT 0x00000000B8710000 000094 (v02 HPQOEM SLIC-CPC 01072009 AMI 01072009) [ 0.029128] ACPI: FIDT 0x00000000B86FD000 00009C (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.029136] ACPI: MCFG 0x00000000B86FC000 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00010013) [ 0.029145] ACPI: HPET 0x00000000B86FB000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00000005) [ 0.029154] ACPI: VFCT 0x00000000B86ED000 00D484 (v01 HPQOEM SLIC-CPC 00000001 AMD 31504F47) [ 0.029162] ACPI: BGRT 0x00000000B86EC000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.029171] ACPI: TPM2 0x00000000B86EB000 00004C (v04 HPQOEM SLIC-CPC 00000001 AMI 00000000) [ 0.029179] ACPI: SSDT 0x00000000B86E9000 001CE4 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000001) [ 0.029188] ACPI: CRAT 0x00000000B86E8000 0007E8 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) [ 0.029197] ACPI: CDIT 0x00000000B86E7000 000029 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) [ 0.029205] ACPI: SSDT 0x00000000B86E6000 000D37 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.029214] ACPI: SSDT 0x00000000B86E4000 0010A5 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.029222] ACPI: SSDT 0x00000000B86E0000 00333E (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.029231] ACPI: SSDT 0x00000000B86DF000 0000BF (v01 HPQOEM SLIC-CPC 00001000 INTL 20120913) [ 0.029240] ACPI: WSMT 0x00000000B86DE000 000028 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.029248] ACPI: APIC 0x00000000B86DD000 00015E (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.029257] ACPI: SSDT 0x00000000B86DC000 000517 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.029266] ACPI: SSDT 0x00000000B86DA000 0010AF (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.029274] ACPI: FPDT 0x00000000B86D9000 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.029288] ACPI: Local APIC address 0xfee00000 [ 0.029611] No NUMA configuration found [ 0.029614] Faking a node at [mem 0x0000000000000000-0x000000021f37ffff] [ 0.029626] NODE_DATA(0) allocated [mem 0x21ab7c000-0x21ab7ffff] [ 0.029690] Zone ranges: [ 0.029693] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.029698] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.029702] Normal [mem 0x0000000100000000-0x000000021f37ffff] [ 0.029707] Device empty [ 0.029710] Movable zone start for each node [ 0.029713] Early memory node ranges [ 0.029715] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.029718] node 0: [mem 0x0000000000100000-0x0000000009c0ffff] [ 0.029722] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.029725] node 0: [mem 0x000000000a20d000-0x000000000affffff] [ 0.029728] node 0: [mem 0x000000000b020000-0x00000000b838ffff] [ 0.029732] node 0: [mem 0x00000000badff000-0x00000000bbffffff] [ 0.029735] node 0: [mem 0x0000000100000000-0x000000021f37ffff] [ 0.029740] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff] [ 0.029744] On node 0 totalpages: 1934483 [ 0.029748] DMA zone: 64 pages used for memmap [ 0.029751] DMA zone: 26 pages reserved [ 0.029754] DMA zone: 3999 pages, LIFO batch:0 [ 0.032133] DMA zone: 28769 pages in unavailable ranges [ 0.032137] DMA32 zone: 11782 pages used for memmap [ 0.032140] DMA32 zone: 754036 pages, LIFO batch:63 [ 0.076694] DMA32 zone: 28300 pages in unavailable ranges [ 0.076706] Normal zone: 18382 pages used for memmap [ 0.076709] Normal zone: 1176448 pages, LIFO batch:63 [ 0.143245] Normal zone: 3200 pages in unavailable ranges [ 0.274167] kasan: KernelAddressSanitizer initialized [ 0.274679] ACPI: PM-Timer IO Port: 0x808 [ 0.274683] ACPI: Local APIC address 0xfee00000 [ 0.274697] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.274714] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.274723] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.274729] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.274733] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.274738] ACPI: IRQ0 used by override. [ 0.274742] ACPI: IRQ9 used by override. [ 0.274747] Using ACPI (MADT) for SMP configuration information [ 0.274751] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.274779] e820: update [mem 0xb5158000-0xb517ffff] usable ==> reserved [ 0.274812] smpboot: Allowing 32 CPUs, 24 hotplug CPUs [ 0.274935] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.274943] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.274951] PM: hibernation: Registered nosave memory: [mem 0x09c10000-0x09ffffff] [ 0.274959] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff] [ 0.274967] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.274975] PM: hibernation: Registered nosave memory: [mem 0xb4c66000-0xb4c66fff] [ 0.274983] PM: hibernation: Registered nosave memory: [mem 0xb4c73000-0xb4c73fff] [ 0.274991] PM: hibernation: Registered nosave memory: [mem 0xb5158000-0xb517ffff] [ 0.274999] PM: hibernation: Registered nosave memory: [mem 0xb6dde000-0xb6ddefff] [ 0.275007] PM: hibernation: Registered nosave memory: [mem 0xb8390000-0xb86c5fff] [ 0.275010] PM: hibernation: Registered nosave memory: [mem 0xb86c6000-0xb8721fff] [ 0.275013] PM: hibernation: Registered nosave memory: [mem 0xb8722000-0xb8a14fff] [ 0.275016] PM: hibernation: Registered nosave memory: [mem 0xb8a15000-0xbadfefff] [ 0.275024] PM: hibernation: Registered nosave memory: [mem 0xbc000000-0xbdffffff] [ 0.275028] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbeffffff] [ 0.275031] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.275034] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff] [ 0.275037] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.275040] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff] [ 0.275043] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff] [ 0.275046] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff] [ 0.275049] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd6fffff] [ 0.275052] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff] [ 0.275055] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ 0.275058] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ 0.275061] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ 0.275064] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.275067] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.275070] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ 0.275073] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ 0.275076] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ 0.275079] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.275082] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.275085] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.275088] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.275091] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.275095] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] [ 0.275098] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] [ 0.275101] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] [ 0.275104] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] [ 0.275107] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff] [ 0.275110] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.275116] [mem 0xc0000000-0xefffffff] available for PCI devices [ 0.275120] Booting paravirtualized kernel on bare hardware [ 0.275125] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.283746] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1 [ 0.285877] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144 [ 0.285919] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152 [ 0.285926] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.285954] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.286068] Built 1 zonelists, mobility grouping on. Total pages: 1904229 [ 0.286072] Policy zone: Normal [ 0.286075] Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux-mainline-llvm.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp debug ignore_loglevel earlyprintk=efi,keep log_buf_len=16M [ 0.287383] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.288005] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.288283] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.487941] Memory: 6325388K/7737932K available (20488K kernel code, 7278K rwdata, 8472K rodata, 2012K init, 5244K bss, 1412288K reserved, 0K cma-reserved) [ 0.487959] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0 [ 0.488611] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 0.488656] ftrace: allocating 41984 entries in 165 pages [ 0.513537] ftrace: allocated 164 pages with 3 groups [ 0.514222] rcu: Preemptible hierarchical RCU implementation. [ 0.514225] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.514228] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32. [ 0.514230] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.514234] Trampoline variant of Tasks RCU enabled. [ 0.514236] Rude variant of Tasks RCU enabled. [ 0.514238] Tracing variant of Tasks RCU enabled. [ 0.514240] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.514243] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.530610] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16 [ 0.531305] Console: colour dummy device 80x25 [ 0.532581] printk: console [tty0] enabled [ 0.532672] ACPI: Core revision 20210105 [ 0.534075] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.534108] APIC: Switch to symmetric I/O mode setup [ 0.536014] Switched APIC routing to physical flat. [ 0.536980] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.550788] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d59da3440c, max_idle_ns: 881590460744 ns [ 0.550813] Calibrating delay loop (skipped), value calculated using timer frequency.. 7589.31 BogoMIPS (lpj=12643710) [ 0.550826] pid_max: default: 32768 minimum: 301 [ 0.560533] LSM: Security Framework initializing [ 0.560572] Yama: becoming mindful. [ 0.560704] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.560737] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.561938] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.562014] LVT offset 1 assigned for vector 0xf9 [ 0.562063] LVT offset 2 assigned for vector 0xf4 [ 0.562083] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.562090] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 0.562103] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.562113] Spectre V2 : Mitigation: Full AMD retpoline [ 0.562119] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.562127] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.562134] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.562143] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.562151] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.562517] Freeing SMP alternatives memory: 32K [ 0.670524] smpboot: CPU0: AMD Ryzen 3 4300G with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1) [ 0.670806] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.670806] ... version: 0 [ 0.670806] ... bit width: 48 [ 0.670806] ... generic registers: 6 [ 0.670806] ... value mask: 0000ffffffffffff [ 0.670806] ... max period: 00007fffffffffff [ 0.670806] ... fixed-purpose events: 0 [ 0.670806] ... event mask: 000000000000003f [ 0.670806] rcu: Hierarchical SRCU implementation. [ 0.670898] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.672692] smp: Bringing up secondary CPUs ... [ 0.673345] x86: Booting SMP configuration: [ 0.673351] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.693536] smp: Brought up 1 node, 8 CPUs [ 0.693536] smpboot: Max logical packages: 4 [ 0.693536] smpboot: Total of 8 processors activated (60714.55 BogoMIPS) [ 0.695830] devtmpfs: initialized [ 0.695830] x86/mm: Memory block size: 128MB [ 0.705546] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes) [ 0.705546] PM: Registering ACPI NVS region [mem 0xb8722000-0xb8a14fff] (3092480 bytes) [ 0.707584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.707638] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.708029] pinctrl core: initialized pinctrl subsystem [ 0.708720] PM: RTC time: 05:52:33, date: 2021-07-03 [ 0.709499] NET: Registered protocol family 16 [ 0.710265] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.710411] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.710565] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.710649] audit: initializing netlink subsys (disabled) [ 0.710823] audit: type=2000 audit(1625291553.176:1): state=initialized audit_enabled=0 res=1 [ 0.711826] thermal_sys: Registered thermal governor 'fair_share' [ 0.711829] thermal_sys: Registered thermal governor 'bang_bang' [ 0.711837] thermal_sys: Registered thermal governor 'step_wise' [ 0.711842] thermal_sys: Registered thermal governor 'user_space' [ 0.711848] thermal_sys: Registered thermal governor 'power_allocator' [ 0.711909] cpuidle: using governor ladder [ 0.711909] cpuidle: using governor menu [ 0.711909] ACPI: bus type PCI registered [ 0.711909] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.711909] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.711909] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.719382] PCI: Using configuration type 1 for base access [ 0.734924] Kprobes globally optimized [ 0.734949] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.734949] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.738422] fbcon: Taking over console [ 0.738518] ACPI: Added _OSI(Module Device) [ 0.738524] ACPI: Added _OSI(Processor Device) [ 0.738529] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.738534] ACPI: Added _OSI(Processor Aggregator Device) [ 0.738545] ACPI: Added _OSI(Linux-Dell-Video) [ 0.738555] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.738565] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 1.267709] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 1.300337] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 1.393616] ACPI: EC: EC started [ 1.393628] ACPI: EC: interrupt blocked [ 1.393658] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.393669] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 1.393680] ACPI: Interpreter enabled [ 1.393805] ACPI: (supports S0 S3 S4 S5) [ 1.393811] ACPI: Using IOAPIC for interrupt routing [ 1.397606] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.407707] ACPI: Enabled 4 GPEs in block 00 to 1F [ 1.658446] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.658486] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 1.664502] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 1.670343] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 1.670482] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 1.680552] PCI host bridge to bus 0000:00 [ 1.680564] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.680577] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.680588] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.680599] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.680610] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.680623] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 1.680635] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window] [ 1.680647] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 1.680660] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.680766] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 [ 1.682372] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 [ 1.683965] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 [ 1.685111] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 [ 1.686247] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 [ 1.686276] pci 0000:00:02.1: enabling Extended Tags [ 1.686363] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold [ 1.689305] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 [ 1.689335] pci 0000:00:02.2: enabling Extended Tags [ 1.689421] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 1.691208] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 [ 1.692342] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 [ 1.692370] pci 0000:00:08.1: enabling Extended Tags [ 1.692452] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 1.694225] pci 0000:00:08.2: [1022:1635] type 01 class 0x060400 [ 1.694252] pci 0000:00:08.2: enabling Extended Tags [ 1.694335] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 1.696116] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 1.697735] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 1.699364] pci 0000:00:18.0: [1022:1448] type 00 class 0x060000 [ 1.700480] pci 0000:00:18.1: [1022:1449] type 00 class 0x060000 [ 1.701595] pci 0000:00:18.2: [1022:144a] type 00 class 0x060000 [ 1.702711] pci 0000:00:18.3: [1022:144b] type 00 class 0x060000 [ 1.703821] pci 0000:00:18.4: [1022:144c] type 00 class 0x060000 [ 1.704933] pci 0000:00:18.5: [1022:144d] type 00 class 0x060000 [ 1.706045] pci 0000:00:18.6: [1022:144e] type 00 class 0x060000 [ 1.707156] pci 0000:00:18.7: [1022:144f] type 00 class 0x060000 [ 1.708924] pci 0000:01:00.0: [1022:43d1] type 00 class 0x0c0330 [ 1.708949] pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit] [ 1.708994] pci 0000:01:00.0: enabling Extended Tags [ 1.709154] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 1.710181] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601 [ 1.710222] pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff] [ 1.710234] pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref] [ 1.710247] pci 0000:01:00.1: enabling Extended Tags [ 1.710386] pci 0000:01:00.1: PME# supported from D3hot D3cold [ 1.716376] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400 [ 1.716425] pci 0000:01:00.2: enabling Extended Tags [ 1.716567] pci 0000:01:00.2: PME# supported from D3hot D3cold [ 1.717573] pci 0000:00:02.1: PCI bridge to [bus 01-0a] [ 1.717584] pci 0000:00:02.1: bridge window [io 0xd000-0xefff] [ 1.717592] pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] [ 1.719436] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400 [ 1.719487] pci 0000:02:00.0: enabling Extended Tags [ 1.719697] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 1.720977] pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400 [ 1.721029] pci 0000:02:01.0: enabling Extended Tags [ 1.721242] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 1.722508] pci 0000:02:02.0: [1022:43c7] type 01 class 0x060400 [ 1.722559] pci 0000:02:02.0: enabling Extended Tags [ 1.722767] pci 0000:02:02.0: PME# supported from D3hot D3cold [ 1.724053] pci 0000:02:03.0: [1022:43c7] type 01 class 0x060400 [ 1.724105] pci 0000:02:03.0: enabling Extended Tags [ 1.724316] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 1.725577] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400 [ 1.725628] pci 0000:02:04.0: enabling Extended Tags [ 1.725836] pci 0000:02:04.0: PME# supported from D3hot D3cold [ 1.727111] pci 0000:02:05.0: [1022:43c7] type 01 class 0x060400 [ 1.727162] pci 0000:02:05.0: enabling Extended Tags [ 1.727370] pci 0000:02:05.0: PME# supported from D3hot D3cold [ 1.728654] pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400 [ 1.728706] pci 0000:02:06.0: enabling Extended Tags [ 1.728914] pci 0000:02:06.0: PME# supported from D3hot D3cold [ 1.730188] pci 0000:02:07.0: [1022:43c7] type 01 class 0x060400 [ 1.730239] pci 0000:02:07.0: enabling Extended Tags [ 1.730448] pci 0000:02:07.0: PME# supported from D3hot D3cold [ 1.731709] pci 0000:01:00.2: PCI bridge to [bus 02-0a] [ 1.731721] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 1.731730] pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 1.732133] pci 0000:02:00.0: PCI bridge to [bus 03] [ 1.732535] pci 0000:02:01.0: PCI bridge to [bus 04] [ 1.732932] pci 0000:02:02.0: PCI bridge to [bus 05] [ 1.733334] pci 0000:02:03.0: PCI bridge to [bus 06] [ 1.733741] pci 0000:02:04.0: PCI bridge to [bus 07] [ 1.733934] pci 0000:02:05.0: PCI bridge to [bus 08] [ 1.734170] pci 0000:09:00.0: [10ec:c821] type 00 class 0x028000 [ 1.734203] pci 0000:09:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 1.734242] pci 0000:09:00.0: reg 0x18: [mem 0xfcc00000-0xfcc0ffff 64bit] [ 1.734638] pci 0000:09:00.0: supports D1 D2 [ 1.734644] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.735243] pci 0000:02:06.0: PCI bridge to [bus 09] [ 1.735254] pci 0000:02:06.0: bridge window [io 0xe000-0xefff] [ 1.735263] pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 1.735488] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000 [ 1.735521] pci 0000:0a:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 1.735564] pci 0000:0a:00.0: reg 0x18: [mem 0xfcb04000-0xfcb04fff 64bit] [ 1.735593] pci 0000:0a:00.0: reg 0x20: [mem 0xfcb00000-0xfcb03fff 64bit] [ 1.735965] pci 0000:0a:00.0: supports D1 D2 [ 1.735971] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.736571] pci 0000:02:07.0: PCI bridge to [bus 0a] [ 1.736582] pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] [ 1.736590] pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 1.737022] pci 0000:0b:00.0: [1c5c:1339] type 00 class 0x010802 [ 1.737046] pci 0000:0b:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit] [ 1.737248] pci 0000:0b:00.0: supports D1 [ 1.737254] pci 0000:0b:00.0: PME# supported from D0 D1 D3hot [ 1.737325] pci 0000:0b:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:02.2 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 1.737750] pci 0000:00:02.2: PCI bridge to [bus 0b] [ 1.737760] pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 1.739105] pci 0000:0c:00.0: [1002:1636] type 00 class 0x030000 [ 1.739123] pci 0000:0c:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.739138] pci 0000:0c:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] [ 1.739150] pci 0000:0c:00.0: reg 0x20: [io 0xf000-0xf0ff] [ 1.739161] pci 0000:0c:00.0: reg 0x24: [mem 0xfca00000-0xfca7ffff] [ 1.739176] pci 0000:0c:00.0: enabling Extended Tags [ 1.739281] pci 0000:0c:00.0: BAR 0: assigned to efifb [ 1.739327] pci 0000:0c:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.739367] pci 0000:0c:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 1.740514] pci 0000:0c:00.1: [1002:1637] type 00 class 0x040300 [ 1.740528] pci 0000:0c:00.1: reg 0x10: [mem 0xfca88000-0xfca8bfff] [ 1.740555] pci 0000:0c:00.1: enabling Extended Tags [ 1.740684] pci 0000:0c:00.1: PME# supported from D1 D2 D3hot D3cold [ 1.741827] pci 0000:0c:00.2: [1022:15df] type 00 class 0x108000 [ 1.741847] pci 0000:0c:00.2: reg 0x18: [mem 0xfc900000-0xfc9fffff] [ 1.741863] pci 0000:0c:00.2: reg 0x24: [mem 0xfca8c000-0xfca8dfff] [ 1.741876] pci 0000:0c:00.2: enabling Extended Tags [ 1.743084] pci 0000:0c:00.3: [1022:1639] type 00 class 0x0c0330 [ 1.743102] pci 0000:0c:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] [ 1.743131] pci 0000:0c:00.3: enabling Extended Tags [ 1.743261] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold [ 1.744407] pci 0000:0c:00.4: [1022:1639] type 00 class 0x0c0330 [ 1.744425] pci 0000:0c:00.4: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit] [ 1.744455] pci 0000:0c:00.4: enabling Extended Tags [ 1.744583] pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold [ 1.745722] pci 0000:0c:00.6: [1022:15e3] type 00 class 0x040300 [ 1.745737] pci 0000:0c:00.6: reg 0x10: [mem 0xfca80000-0xfca87fff] [ 1.745764] pci 0000:0c:00.6: enabling Extended Tags [ 1.745892] pci 0000:0c:00.6: PME# supported from D0 D3hot D3cold [ 1.747111] pci 0000:00:08.1: PCI bridge to [bus 0c] [ 1.747120] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 1.747128] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] [ 1.747137] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 1.747640] pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601 [ 1.747668] pci 0000:0d:00.0: reg 0x24: [mem 0xfce01000-0xfce017ff] [ 1.747681] pci 0000:0d:00.0: enabling Extended Tags [ 1.747842] pci 0000:0d:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 1.748684] pci 0000:0d:00.1: [1022:7901] type 00 class 0x010601 [ 1.748712] pci 0000:0d:00.1: reg 0x24: [mem 0xfce00000-0xfce007ff] [ 1.748725] pci 0000:0d:00.1: enabling Extended Tags [ 1.749708] pci 0000:00:08.2: PCI bridge to [bus 0d] [ 1.749718] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 1.758356] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 1.759656] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 1.760873] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 1.762239] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 1.763530] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 1.764630] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 1.765726] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 1.766833] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 1.779473] ACPI: EC: interrupt unblocked [ 1.779480] ACPI: EC: event unblocked [ 1.779489] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.779495] ACPI: EC: GPE=0x3 [ 1.779505] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 1.779523] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 1.779871] iommu: Default domain type: Translated [ 1.779965] pci 0000:0c:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.779965] pci 0000:0c:00.0: vgaarb: bridge control possible [ 1.779965] pci 0000:0c:00.0: vgaarb: setting as boot device [ 1.779965] vgaarb: loaded [ 1.781850] SCSI subsystem initialized [ 1.781893] libata version 3.00 loaded. [ 1.781893] ACPI: bus type USB registered [ 1.781893] usbcore: registered new interface driver usbfs [ 1.781893] usbcore: registered new interface driver hub [ 1.781893] usbcore: registered new device driver usb [ 1.781893] pps_core: LinuxPPS API ver. 1 registered [ 1.781893] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 1.781893] PTP clock support registered [ 1.781893] EDAC MC: Ver: 3.0.0 [ 1.781893] Registered efivars operations [ 1.785136] NetLabel: Initializing [ 1.785143] NetLabel: domain hash size = 128 [ 1.785148] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.785246] NetLabel: unlabeled traffic allowed by default [ 1.785269] PCI: Using ACPI for IRQ routing [ 1.789174] PCI: pci_cache_line_size set to 64 bytes [ 1.789273] e820: reserve RAM buffer [mem 0x09c10000-0x0bffffff] [ 1.789288] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 1.789300] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 1.789312] e820: reserve RAM buffer [mem 0xb4c66018-0xb7ffffff] [ 1.789324] e820: reserve RAM buffer [mem 0xb5158000-0xb7ffffff] [ 1.789336] e820: reserve RAM buffer [mem 0xb6dde000-0xb7ffffff] [ 1.789347] e820: reserve RAM buffer [mem 0xb8390000-0xbbffffff] [ 1.789360] e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff] [ 1.789385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.789385] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.791525] clocksource: Switched to clocksource tsc-early [ 1.886355] VFS: Disk quotas dquot_6.6.0 [ 1.886463] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.887380] pnp: PnP ACPI init [ 1.888708] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 1.888751] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.889901] system 00:01: [mem 0x220000000-0x23fffffff window] has been reserved [ 1.889932] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.892039] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.904512] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 1.904531] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 1.904547] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 1.904564] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 1.904580] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 1.904596] system 00:03: [io 0x0a50-0x0a5f] has been reserved [ 1.904614] system 00:03: [io 0x0a60-0x0a6f] has been reserved [ 1.904630] system 00:03: [io 0x0a70-0x0a7f] has been reserved [ 1.904646] system 00:03: [io 0x0a80-0x0a8f] has been reserved [ 1.904662] system 00:03: [io 0x0a90-0x0b8e] has been reserved [ 1.904678] system 00:03: [io 0x0aa0-0x0aaf] has been reserved [ 1.904694] system 00:03: [io 0x0ab0-0x0abf] has been reserved [ 1.904711] system 00:03: [io 0x0ac0-0x0acf] has been reserved [ 1.904727] system 00:03: [io 0x0ad0-0x0adf] has been reserved [ 1.904755] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.909811] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 1.909829] system 00:04: [io 0x040b] has been reserved [ 1.909845] system 00:04: [io 0x04d6] has been reserved [ 1.909861] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 1.909877] system 00:04: [io 0x0c14] has been reserved [ 1.909893] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 1.909909] system 00:04: [io 0x0c52] has been reserved [ 1.909925] system 00:04: [io 0x0c6c] has been reserved [ 1.909941] system 00:04: [io 0x0c6f] has been reserved [ 1.909957] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 1.909973] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 1.909990] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 1.910006] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 1.910022] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 1.910038] system 00:04: [io 0x0800-0x089f] has been reserved [ 1.910055] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 1.910071] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 1.910088] system 00:04: [io 0x0900-0x090f] has been reserved [ 1.910104] system 00:04: [io 0x0910-0x091f] has been reserved [ 1.910132] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.910159] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 1.910179] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 1.910202] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.910229] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 1.910248] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 1.910266] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 1.910296] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.920974] pnp: PnP ACPI: found 5 devices [ 1.934928] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.935177] NET: Registered protocol family 2 [ 1.936737] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.936894] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.937457] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.937992] TCP: Hash tables configured (established 65536 bind 65536) [ 1.938701] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 1.938849] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.938946] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.939477] NET: Registered protocol family 1 [ 1.939502] NET: Registered protocol family 44 [ 1.939541] pci 0000:02:00.0: PCI bridge to [bus 03] [ 1.939565] pci 0000:02:01.0: PCI bridge to [bus 04] [ 1.939580] pci 0000:02:02.0: PCI bridge to [bus 05] [ 1.939595] pci 0000:02:03.0: PCI bridge to [bus 06] [ 1.939610] pci 0000:02:04.0: PCI bridge to [bus 07] [ 1.939625] pci 0000:02:05.0: PCI bridge to [bus 08] [ 1.939640] pci 0000:02:06.0: PCI bridge to [bus 09] [ 1.939647] pci 0000:02:06.0: bridge window [io 0xe000-0xefff] [ 1.939657] pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 1.939671] pci 0000:02:07.0: PCI bridge to [bus 0a] [ 1.939678] pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] [ 1.939687] pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 1.939700] pci 0000:01:00.2: PCI bridge to [bus 02-0a] [ 1.939707] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 1.939717] pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 1.939730] pci 0000:00:02.1: PCI bridge to [bus 01-0a] [ 1.939736] pci 0000:00:02.1: bridge window [io 0xd000-0xefff] [ 1.939744] pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] [ 1.939755] pci 0000:00:02.2: PCI bridge to [bus 0b] [ 1.939762] pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 1.939775] pci 0000:00:08.1: PCI bridge to [bus 0c] [ 1.939782] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 1.939790] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] [ 1.939798] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 1.939809] pci 0000:00:08.2: PCI bridge to [bus 0d] [ 1.939816] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 1.939830] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.939838] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.939845] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.939852] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.939859] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.939866] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.939873] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window] [ 1.939881] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 1.939889] pci_bus 0000:01: resource 0 [io 0xd000-0xefff] [ 1.939895] pci_bus 0000:01: resource 1 [mem 0xfcb00000-0xfcdfffff] [ 1.939902] pci_bus 0000:02: resource 0 [io 0xd000-0xefff] [ 1.939909] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfccfffff] [ 1.939916] pci_bus 0000:09: resource 0 [io 0xe000-0xefff] [ 1.939923] pci_bus 0000:09: resource 1 [mem 0xfcc00000-0xfccfffff] [ 1.939930] pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff] [ 1.939937] pci_bus 0000:0a: resource 1 [mem 0xfcb00000-0xfcbfffff] [ 1.939944] pci_bus 0000:0b: resource 1 [mem 0xfcf00000-0xfcffffff] [ 1.939952] pci_bus 0000:0c: resource 0 [io 0xf000-0xffff] [ 1.939958] pci_bus 0000:0c: resource 1 [mem 0xfc700000-0xfcafffff] [ 1.939965] pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 1.939974] pci_bus 0000:0d: resource 1 [mem 0xfce00000-0xfcefffff] [ 1.942791] pci 0000:0c:00.1: D0 power state depends on 0000:0c:00.0 [ 1.945901] PCI: CLS 64 bytes, default 64 [ 1.946192] Trying to unpack rootfs image as initramfs... [ 2.206923] Freeing initrd memory: 8380K [ 2.337507] pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter. [ 2.338662] pci 0000:00:00.2: can't derive routing for PCI INT A [ 2.338673] pci 0000:00:00.2: PCI INT A: not connected [ 2.338859] pci 0000:00:01.0: Adding to iommu group 0 [ 2.338992] pci 0000:00:02.0: Adding to iommu group 1 [ 2.339096] pci 0000:00:02.1: Adding to iommu group 2 [ 2.339204] pci 0000:00:02.2: Adding to iommu group 3 [ 2.339341] pci 0000:00:08.0: Adding to iommu group 4 [ 2.339407] pci 0000:00:08.1: Adding to iommu group 4 [ 2.339475] pci 0000:00:08.2: Adding to iommu group 4 [ 2.339588] pci 0000:00:14.0: Adding to iommu group 5 [ 2.339638] pci 0000:00:14.3: Adding to iommu group 5 [ 2.339789] pci 0000:00:18.0: Adding to iommu group 6 [ 2.339839] pci 0000:00:18.1: Adding to iommu group 6 [ 2.339895] pci 0000:00:18.2: Adding to iommu group 6 [ 2.339951] pci 0000:00:18.3: Adding to iommu group 6 [ 2.340000] pci 0000:00:18.4: Adding to iommu group 6 [ 2.340050] pci 0000:00:18.5: Adding to iommu group 6 [ 2.340101] pci 0000:00:18.6: Adding to iommu group 6 [ 2.340151] pci 0000:00:18.7: Adding to iommu group 6 [ 2.340254] pci 0000:01:00.0: Adding to iommu group 7 [ 2.340308] pci 0000:01:00.1: Adding to iommu group 7 [ 2.340362] pci 0000:01:00.2: Adding to iommu group 7 [ 2.340402] pci 0000:02:00.0: Adding to iommu group 7 [ 2.340441] pci 0000:02:01.0: Adding to iommu group 7 [ 2.340481] pci 0000:02:02.0: Adding to iommu group 7 [ 2.340524] pci 0000:02:03.0: Adding to iommu group 7 [ 2.340566] pci 0000:02:04.0: Adding to iommu group 7 [ 2.340606] pci 0000:02:05.0: Adding to iommu group 7 [ 2.340651] pci 0000:02:06.0: Adding to iommu group 7 [ 2.340690] pci 0000:02:07.0: Adding to iommu group 7 [ 2.340731] pci 0000:09:00.0: Adding to iommu group 7 [ 2.340774] pci 0000:0a:00.0: Adding to iommu group 7 [ 2.340865] pci 0000:0b:00.0: Adding to iommu group 8 [ 2.340917] pci 0000:0c:00.0: Adding to iommu group 4 [ 2.340956] pci 0000:0c:00.1: Adding to iommu group 4 [ 2.340996] pci 0000:0c:00.2: Adding to iommu group 4 [ 2.341038] pci 0000:0c:00.3: Adding to iommu group 4 [ 2.341078] pci 0000:0c:00.4: Adding to iommu group 4 [ 2.341122] pci 0000:0c:00.6: Adding to iommu group 4 [ 2.341163] pci 0000:0d:00.0: Adding to iommu group 4 [ 2.341203] pci 0000:0d:00.1: Adding to iommu group 4 [ 2.361821] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 2.361839] pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade): [ 2.361846] PPR X2APIC NX GT IA GA PC GA_vAPIC [ 2.361861] AMD-Vi: Interrupt remapping enabled [ 2.361865] AMD-Vi: Virtual APIC enabled [ 2.361870] AMD-Vi: X2APIC enabled [ 2.362272] AMD-Vi: Lazy IO/TLB flushing enabled [ 2.362422] amd_uncore: 4 amd_df counters detected [ 2.362449] amd_uncore: 6 amd_l3 counters detected [ 2.363111] LVT offset 0 assigned for vector 0x400 [ 2.363391] perf: AMD IBS detected (0x000003ff) [ 2.366963] check: Scanning for low memory corruption every 60 seconds [ 2.370830] Initialise system trusted keyrings [ 2.370874] Key type blacklist registered [ 2.371070] workingset: timestamp_bits=41 max_order=21 bucket_order=0 [ 2.387358] zbud: loaded [ 2.392535] Key type asymmetric registered [ 2.392543] Asymmetric key parser 'x509' registered [ 2.392593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 2.392758] io scheduler mq-deadline registered [ 2.392767] io scheduler kyber registered [ 2.393069] io scheduler bfq registered [ 2.395473] pcieport 0000:00:02.1: PME: Signaling with IRQ 26 [ 2.396128] pcieport 0000:00:02.2: PME: Signaling with IRQ 27 [ 2.396753] pcieport 0000:00:08.1: PME: Signaling with IRQ 28 [ 2.398314] pcieport 0000:00:08.2: PME: Signaling with IRQ 29 [ 2.408158] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.408334] efifb: probing for efifb [ 2.408723] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k [ 2.408731] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 2.408737] efifb: scrolling: redraw [ 2.408741] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.409539] Console: switching to colour frame buffer device 128x48 [ 2.414601] fb0: EFI VGA frame buffer device [ 2.415135] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.415443] ACPI: button: Power Button [PWRB] [ 2.415762] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.417681] ACPI: button: Power Button [PWRF] [ 2.418097] Monitor-Mwait will be used to enter C-1 state [ 2.418214] ACPI: \_PR_.C000: Found 3 idle states [ 2.419216] ACPI: \_PR_.C002: Found 3 idle states [ 2.420364] ACPI: \_PR_.C004: Found 3 idle states [ 2.421422] ACPI: \_PR_.C006: Found 3 idle states [ 2.422445] ACPI: \_PR_.C001: Found 3 idle states [ 2.423446] ACPI: \_PR_.C003: Found 3 idle states [ 2.424566] ACPI: \_PR_.C005: Found 3 idle states [ 2.426058] ACPI: \_PR_.C007: Found 3 idle states [ 2.438042] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.438115] ACPI: thermal: Thermal Zone [HPTZ] (30 C) [ 2.439130] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.452629] Non-volatile memory driver v1.3 [ 2.452687] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]> [ 2.459169] nvme nvme0: pci function 0000:0b:00.0 [ 2.459441] ahci 0000:01:00.1: version 3.0 [ 2.459494] ahci 0000:01:00.1: enabling device (0100 -> 0102) [ 2.460857] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 2.462739] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 2.464583] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 2.464969] ================================================================== [ 2.468288] BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.468288] Read of size 8 at addr ffff8881d7830000 by task swapper/0/0
[ 2.468288] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 [ 2.468288] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 2.468288] Call Trace: [ 2.468288] <IRQ> [ 2.479433] dump_stack+0x9c/0xcf [ 2.479433] print_address_description.constprop.0+0x18/0x130 [ 2.479433] ? __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.479433] kasan_report.cold+0x7f/0x111 [ 2.479433] ? __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.479433] __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.479433] nvme_pci_complete_rq+0x73/0x130 [ 2.479433] blk_complete_reqs+0x6f/0x80 [ 2.479433] __do_softirq+0xfc/0x3be [ 2.479433] irq_exit_rcu+0xce/0x120 [ 2.479433] common_interrupt+0x80/0xa0 [ 2.479433] </IRQ> [ 2.479433] asm_common_interrupt+0x1e/0x40 [ 2.479433] RIP: 0010:cpuidle_enter_state+0xf9/0x590 [ 2.479433] Code: 3d 24 0f 37 6d e8 67 ac 49 ff 49 89 c5 0f 1f 44 00 00 31 ff e8 28 c1 49 ff 80 3c 24 00 0f 85 aa 02 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 39 02 00 00 49 63 ee 48 8d 44 6d 00 48 8d 44 85 00 [ 2.479433] RSP: 0018:ffffffff94007df0 EFLAGS: 00000246 [ 2.479433] RAX: 0000000000000000 RBX: ffff8881075a8000 RCX: ffffffff92144885 [ 2.479433] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881d6a35648 [ 2.479433] RBP: 0000000000000003 R08: 0000000000000001 R09: ffff8881d6a356d7 [ 2.479433] R10: ffffed103ad46ada R11: 0000000000000001 R12: ffffffff9445ba80 [ 2.479433] R13: 0000000092ec3156 R14: 0000000000000003 R15: ffffffff9445bc10 [ 2.479433] ? sched_idle_set_state+0x25/0x30 [ 2.479433] ? ladder_select_state+0x350/0x370 [ 2.479433] cpuidle_enter+0x3c/0x60 [ 2.525920] do_idle+0x2fa/0x3c0 [ 2.525920] ? arch_cpu_idle_exit+0x40/0x40 [ 2.525920] cpu_startup_entry+0x19/0x20 [ 2.525920] start_kernel+0x3a9/0x3c7 [ 2.525920] secondary_startup_64_no_verify+0xc2/0xcb
[ 2.525920] The buggy address belongs to the page: [ 2.525920] page:0000000016c8183d refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d7830 [ 2.525920] flags: 0x2ffff0000000000() [ 2.525920] raw: 02ffff0000000000 dead000000000100 dead000000000122 0000000000000000 [ 2.525920] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 2.525920] page dumped because: kasan: bad access detected
[ 2.525920] Memory state around the buggy address: [ 2.525920] ffff8881d782ff00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.525920] ffff8881d782ff80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.525920] >ffff8881d7830000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.525920] ^ [ 2.525920] ffff8881d7830080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.525920] ffff8881d7830100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.525920] ================================================================== [ 2.525920] Disabling lock debugging due to kernel taint [ 2.566191] nvme nvme0: missing or invalid SUBNQN field. [ 2.566573] scsi host0: ahci [ 2.571284] scsi host1: ahci [ 2.573925] scsi host2: ahci [ 2.575531] nvme nvme0: 16/0/0 default/read/poll queues [ 2.576652] scsi host3: ahci [ 2.580305] scsi host4: ahci [ 2.582369] nvme0n1: p1 p2 [ 2.583114] scsi host5: ahci [ 2.586918] scsi host6: ahci [ 2.589693] scsi host7: ahci [ 2.591895] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 44 [ 2.593562] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 44 [ 2.595213] ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 44 [ 2.596830] ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 44 [ 2.598384] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 44 [ 2.599856] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 44 [ 2.601282] ata7: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80400 irq 44 [ 2.602663] ata8: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80480 irq 44 [ 2.604233] ahci 0000:0d:00.0: enabling device (0100 -> 0102) [ 2.624072] ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 2.626047] ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 2.629115] scsi host8: ahci [ 2.631134] ata9: SATA max UDMA/133 abar m2048@0xfce01000 port 0xfce01100 irq 62 [ 2.632725] ahci 0000:0d:00.1: enabling device (0100 -> 0102) [ 2.645647] ahci 0000:0d:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 2.647377] ahci 0000:0d:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 2.650684] scsi host9: ahci [ 2.652987] ata10: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 64 [ 2.654771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.656479] ehci-pci: EHCI PCI platform driver [ 2.658223] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.659922] ohci-pci: OHCI PCI platform driver [ 2.661613] uhci_hcd: USB Universal Host Controller Interface driver [ 2.663598] usbcore: registered new interface driver usbserial_generic [ 2.665273] usbserial: USB Serial support registered for generic [ 2.667509] rtc_cmos 00:02: RTC can wake from S4 [ 2.670325] rtc_cmos 00:02: registered as rtc0 [ 2.672456] rtc_cmos 00:02: setting system clock to 2021-07-03T05:52:35 UTC (1625291555) [ 2.674292] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.676648] ledtrig-cpu: registered to indicate activity on CPUs [ 2.680761] hid: raw HID events driver (C) Jiri Kosina [ 2.682838] drop_monitor: Initializing network drop monitor service [ 2.684723] Initializing XFRM netlink socket [ 2.687522] NET: Registered protocol family 10 [ 2.706529] Segment Routing with IPv6 [ 2.708311] RPL Segment Routing with IPv6 [ 2.710080] NET: Registered protocol family 17 [ 2.717145] microcode: CPU0: patch_level=0x08600106 [ 2.719302] microcode: CPU1: patch_level=0x08600106 [ 2.721700] microcode: CPU2: patch_level=0x08600106 [ 2.723611] microcode: CPU3: patch_level=0x08600106 [ 2.725354] microcode: CPU4: patch_level=0x08600106 [ 2.727673] microcode: CPU5: patch_level=0x08600106 [ 2.729894] microcode: CPU6: patch_level=0x08600106 [ 2.732003] microcode: CPU7: patch_level=0x08600106 [ 2.733779] microcode: Microcode Update Driver: v2.2. [ 2.734648] resctrl: L3 allocation detected [ 2.738008] resctrl: L3DATA allocation detected [ 2.739649] resctrl: L3CODE allocation detected [ 2.741298] resctrl: MB allocation detected [ 2.742960] resctrl: L3 monitoring detected [ 2.744639] IPI shorthand broadcast: enabled [ 2.746420] sched_clock: Marking stable (2741486890, 3147034)->(2749935265, -5301341) [ 2.748947] registered taskstats version 1 [ 2.750823] Loading compiled-in X.509 certificates [ 2.762366] Loaded X.509 cert 'Build time autogenerated kernel key: 2e7560f4a0c00f3b7155a946e3c119b89f094b3b' [ 2.768372] zswap: loaded using pool lz4/z3fold [ 2.771903] Key type ._fscrypt registered [ 2.773785] Key type .fscrypt registered [ 2.775622] Key type fscrypt-provisioning registered [ 2.784028] PM: Magic number: 13:98:870 [ 2.787045] RAS: Correctable Errors collector initialized. [ 2.917218] ata1: SATA link down (SStatus 0 SControl 300) [ 2.943732] ata9: SATA link down (SStatus 0 SControl 300) [ 2.966342] ata10: SATA link down (SStatus 0 SControl 300) [ 3.233062] ata2: SATA link down (SStatus 0 SControl 300) [ 3.384422] tsc: Refined TSC clocksource calibration: 3819.247 MHz [ 3.386233] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6e1abb3f6be, max_idle_ns: 881590761792 ns [ 3.388357] clocksource: Switched to clocksource tsc [ 3.546862] ata3: SATA link down (SStatus 0 SControl 300) [ 3.859988] ata4: SATA link down (SStatus 0 SControl 300) [ 4.173723] ata5: SATA link down (SStatus 0 SControl 300) [ 4.485990] ata6: SATA link down (SStatus 0 SControl 300) [ 4.800108] ata7: SATA link down (SStatus 0 SControl 300) [ 5.113290] ata8: SATA link down (SStatus 0 SControl 300) [ 5.124842] Freeing unused decrypted memory: 2036K [ 5.127293] Freeing unused kernel image (initmem) memory: 2012K [ 5.128839] Write protecting the kernel read-only data: 32768k [ 5.131774] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 5.134151] Freeing unused kernel image (rodata/data gap) memory: 1768K [ 5.193177] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.194740] rodata_test: all tests were successful [ 5.196302] Run /init as init process [ 5.197816] with arguments: [ 5.199318] /init [ 5.200791] with environment: [ 5.202284] HOME=/ [ 5.203786] TERM=linux [ 5.672103] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.674778] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 5.731851] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 5.736868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 5.738700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.740524] usb usb1: Product: xHCI Host Controller [ 5.742360] usb usb1: Manufacturer: Linux 5.12.0-rc3-debug xhci-hcd [ 5.744342] usb usb1: SerialNumber: 0000:01:00.0 [ 5.747557] hub 1-0:1.0: USB hub found [ 5.749393] hub 1-0:1.0: 14 ports detected [ 5.758482] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.760257] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 5.761988] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 5.763890] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.766015] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 [ 5.767821] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.769624] usb usb2: Product: xHCI Host Controller [ 5.771537] usb usb2: Manufacturer: Linux 5.12.0-rc3-debug xhci-hcd [ 5.773341] usb usb2: SerialNumber: 0000:01:00.0 [ 5.776368] hub 2-0:1.0: USB hub found [ 5.778218] hub 2-0:1.0: 8 ports detected [ 5.786159] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 5.788013] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 [ 5.790016] xhci_hcd 0000:0c:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 [ 5.794538] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 5.796327] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.798153] usb usb3: Product: xHCI Host Controller [ 5.799989] usb usb3: Manufacturer: Linux 5.12.0-rc3-debug xhci-hcd [ 5.801878] usb usb3: SerialNumber: 0000:0c:00.3 [ 5.804989] hub 3-0:1.0: USB hub found [ 5.806943] hub 3-0:1.0: 4 ports detected [ 5.810968] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 5.812911] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 [ 5.814852] xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 5.816914] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.819226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 [ 5.821220] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.823188] usb usb4: Product: xHCI Host Controller [ 5.825148] usb usb4: Manufacturer: Linux 5.12.0-rc3-debug xhci-hcd [ 5.827132] usb usb4: SerialNumber: 0000:0c:00.3 [ 5.830304] hub 4-0:1.0: USB hub found [ 5.832356] hub 4-0:1.0: 2 ports detected [ 5.836607] xhci_hcd 0000:0c:00.4: xHCI Host Controller [ 5.838724] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 5 [ 5.841046] xhci_hcd 0000:0c:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 [ 5.845927] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 5.848104] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.850279] usb usb5: Product: xHCI Host Controller [ 5.852448] usb usb5: Manufacturer: Linux 5.12.0-rc3-debug xhci-hcd [ 5.854628] usb usb5: SerialNumber: 0000:0c:00.4 [ 5.857964] hub 5-0:1.0: USB hub found [ 5.860097] hub 5-0:1.0: 4 ports detected [ 5.864318] xhci_hcd 0000:0c:00.4: xHCI Host Controller [ 5.866417] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 6 [ 5.868521] xhci_hcd 0000:0c:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 5.870764] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.873234] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 [ 5.875410] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.877581] usb usb6: Product: xHCI Host Controller [ 5.879736] usb usb6: Manufacturer: Linux 5.12.0-rc3-debug xhci-hcd [ 5.881917] usb usb6: SerialNumber: 0000:0c:00.4 [ 5.885175] hub 6-0:1.0: USB hub found [ 5.887373] hub 6-0:1.0: 2 ports detected [ 5.972196] random: fast init done [ 6.087608] usb 1-11: new full-speed USB device number 2 using xhci_hcd [ 6.273180] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled [ 6.283881] XFS (nvme0n1p2): Mounting V5 Filesystem [ 6.301438] XFS (nvme0n1p2): Ending clean mount [ 6.307594] xfs filesystem being mounted at /new_root supports timestamps until 2038 (0x7fffffff) [ 6.423979] usb 1-11: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 6.426964] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.429116] usb 1-11: Product: USB Receiver [ 6.431270] usb 1-11: Manufacturer: Logitech [ 6.512460] random: crng init done [ 6.514601] systemd[1]: Successfully credited entropy passed from boot loader. [ 6.519182] systemd[1]: systemd 248.3-2-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 6.526303] systemd[1]: No virtualization found in DMI [ 6.544505] systemd[1]: UML virtualization not found in /proc/cpuinfo. [ 6.547123] systemd[1]: No virtualization found in CPUID [ 6.549421] systemd[1]: Virtualization XEN not found, /proc/xen does not exist [ 6.551947] systemd[1]: This platform does not support /proc/device-tree [ 6.554174] systemd[1]: This platform does not support /proc/sysinfo [ 6.556362] systemd[1]: Found VM virtualization none [ 6.558608] systemd[1]: Detected architecture x86-64. [ 6.561488] systemd[1]: Detected initialized system, this is not the first boot. [ 6.572027] systemd[1]: Hostname set to <hp-4300G>. [ 6.575932] systemd[1]: Successfully added address 127.0.0.1 to loopback interface [ 6.578272] systemd[1]: Successfully added address ::1 to loopback interface [ 6.580513] systemd[1]: Successfully brought loopback interface up [ 6.583278] systemd[1]: Setting 'fs/file-max' to '9223372036854775807'. [ 6.585597] systemd[1]: Setting 'fs/nr_open' to '2147483640'. [ 6.587895] systemd[1]: Couldn't write fs.nr_open as 2147483640, halving it. [ 6.590142] systemd[1]: Setting 'fs/nr_open' to '1073741816'. [ 6.592386] systemd[1]: Successfully bumped fs.nr_open to 1073741816 [ 6.596797] systemd[1]: Found cgroup2 on /sys/fs/cgroup/, full unified hierarchy [ 6.599105] systemd[1]: Unified cgroup hierarchy is located at /sys/fs/cgroup. [ 6.612552] systemd[1]: Got EBADF when using BPF_F_ALLOW_MULTI, which indicates it is supported. Yay! [ 6.615700] systemd[1]: Controller 'cpu' supported: yes [ 6.618063] systemd[1]: Controller 'cpuacct' supported: no [ 6.620391] systemd[1]: Controller 'cpuset' supported: yes [ 6.622710] systemd[1]: Controller 'io' supported: yes [ 6.624999] systemd[1]: Controller 'blkio' supported: no [ 6.627232] systemd[1]: Controller 'memory' supported: yes [ 6.629416] systemd[1]: Controller 'devices' supported: no [ 6.631609] systemd[1]: Controller 'pids' supported: yes [ 6.633741] systemd[1]: Controller 'bpf-firewall' supported: yes [ 6.635832] systemd[1]: Controller 'bpf-devices' supported: yes [ 6.637483] usb 1-12: new full-speed USB device number 3 using xhci_hcd [ 6.638244] systemd[1]: Set up TFD_TIMER_CANCEL_ON_SET timerfd. [ 6.643315] systemd[1]: Enabling (yes) showing of status (commandline). [ 6.646012] systemd[1]: Serializing system-environment-generators to memfd. [ 6.649222] systemd[1]: Successfully forked off '(sd-executor)' as PID 242. [ 6.650166] systemd[242]: Serializing 10-arch to memfd. [ 6.654825] systemd[242]: Successfully forked off '(direxec)' as PID 243. [ 6.676007] systemd[242]: /usr/lib/systemd/system-environment-generators/10-arch succeeded. [ 6.680054] systemd[1]: (sd-executor) succeeded. [ 6.683877] systemd[1]: Successfully forked off '(sd-executor)' as PID 244. [ 6.687068] systemd[244]: Successfully forked off '(direxec)' as PID 245. [ 6.690471] systemd[244]: Successfully forked off '(direxec)' as PID 246. [ 6.693787] systemd[244]: Successfully forked off '(direxec)' as PID 247. [ 6.694955] systemd-bless-boot-generator[245]: Skipping generator, not booted with boot counting in effect. [ 6.697112] systemd[244]: Successfully forked off '(direxec)' as PID 248. [ 6.703122] systemd[244]: Successfully forked off '(direxec)' as PID 249. [ 6.707898] systemd[244]: Successfully forked off '(direxec)' as PID 250. [ 6.708383] systemd-fstab-generator[248]: Parsing /etc/fstab... [ 6.712179] systemd[244]: Successfully forked off '(direxec)' as PID 251. [ 6.713256] systemd-fstab-generator[248]: Found entry what=tmpfs where=/tmp type=tmpfs makefs=no growfs=no noauto=no nofail=no [ 6.715761] systemd-gpt-auto-generator[250]: Disabling root partition auto-detection, root= is defined. [ 6.717146] systemd[244]: Successfully forked off '(direxec)' as PID 252. [ 6.719246] systemd[244]: Successfully forked off '(direxec)' as PID 253. [ 6.719689] systemd-hibernate-resume-generator[251]: Not running in an initrd, quitting. [ 6.721290] systemd[244]: Successfully forked off '(direxec)' as PID 254. [ 6.721414] systemd[244]: /usr/lib/systemd/system-generators/systemd-bless-boot-generator succeeded. [ 6.721802] systemd-fstab-generator[248]: Found entry what=/dev/disk/by-uuid/5457d04f-1fb0-4138-8f28-be95c401b449 where=/ type=xfs makefs=no growfs=no noauto=no nofail=no [ 6.725160] systemd-gpt-auto-generator[250]: Failed to chase block device '/', ignoring: No such file or directory [ 6.728250] systemd-fstab-generator[248]: Found entry what= [ 6.730487] systemd[244]: /usr/lib/systemd/system-generators/systemd-veritysetup-generator succeeded. [ 6.731508] systemd-gpt-auto-generator[250]: nvme0n1p2: Root device /dev/nvme0n1. [ 6.732467] systemd-fstab-generator[248]: where= type= makefs=no growfs=no noauto=no nofail=no [ 6.735097] systemd[244]: /usr/lib/systemd/system-generators/systemd-debug-generator succeeded. [ 6.737246] systemd-fstab-generator[248]: Mount point is not a valid path, ignoring. [ 6.759523] systemd-fstab-generator[248]: Found entry what=/dev/disk/by-uuid/BABE-8F35 where=/boot type=vfat makefs=no growfs=no noauto=no nofail=no [ 6.759864] systemd-fstab-generator[248]: Checking was requested for /dev/disk/by-uuid/BABE-8F35, but fsck.vfat does not exist. [ 6.767403] systemd[244]: /usr/lib/systemd/system-generators/systemd-getty-generator succeeded. [ 6.770973] systemd-fstab-generator[248]: Found entry what= [ 6.772029] systemd-gpt-auto-generator[250]: /boot specified in fstab, ignoring. [ 6.773734] systemd[244]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator succeeded. [ 6.776211] systemd-fstab-generator[248]: where= type= makefs=no growfs=no noauto=no nofail=no [ 6.778971] systemd[244]: /usr/lib/systemd/system-generators/systemd-cryptsetup-generator succeeded. [ 6.781788] systemd-fstab-generator[248]: Mount point is not a valid path, ignoring. [ 6.784696] systemd[244]: /usr/lib/systemd/system-generators/systemd-run-generator succeeded. [ 6.793437] systemd[244]: /usr/lib/systemd/system-generators/systemd-fstab-generator succeeded. [ 6.796378] systemd[244]: /usr/lib/systemd/system-generators/systemd-system-update-generator succeeded. [ 6.799363] systemd[244]: /usr/lib/systemd/system-generators/systemd-hibernate-resume-generator succeeded. [ 6.803548] systemd[1]: (sd-executor) succeeded. [ 6.806739] systemd[1]: Looking for unit files in (higher priority first): [ 6.809609] systemd[1]: /etc/systemd/system.control [ 6.812462] systemd[1]: /run/systemd/system.control [ 6.815276] systemd[1]: /run/systemd/transient [ 6.818037] systemd[1]: /run/systemd/generator.early [ 6.820789] systemd[1]: /etc/systemd/system [ 6.823485] systemd[1]: /etc/systemd/system.attached [ 6.826236] systemd[1]: /run/systemd/system [ 6.828956] systemd[1]: /run/systemd/system.attached [ 6.831666] systemd[1]: /run/systemd/generator [ 6.834269] systemd[1]: /usr/local/lib/systemd/system [ 6.836896] systemd[1]: /usr/lib/systemd/system [ 6.839528] systemd[1]: /run/systemd/generator.late [ 6.845675] systemd[1]: Modification times have changed, need to update cache. [ 6.850304] systemd[1]: unit_file_build_name_map: alias: /etc/systemd/system/dbus-org.freedesktop.network1.service \xe2\x86\x92 systemd-networkd.service [ 6.856480] systemd[1]: unit_file_build_name_map: alias: /etc/systemd/system/dbus-org.freedesktop.resolve1.service \xe2\x86\x92 systemd-resolved.service [ 6.863257] systemd[1]: unit_file_build_name_map: alias: /etc/systemd/system/display-manager.service \xe2\x86\x92 lightdm.service [ 6.866353] systemd[1]: unit_file_build_name_map: normal unit file: /run/systemd/generator/boot.mount [ 6.869294] systemd[1]: unit_file_build_name_map: normal unit file: /run/systemd/generator/-.mount [ 6.872181] systemd[1]: unit_file_build_name_map: normal unit file: /run/systemd/generator/tmp.mount [ 6.875369] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/nscd.service [ 6.878183] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 6.880963] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/e2scrub_all.service [ 6.883569] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/e2scrub_all.timer [ 6.886114] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 6.888620] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/e2scrub_reap.service [ 6.891050] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/krb5-kadmind.service [ 6.893434] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/krb5-kdc.service [ 6.895760] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/krb5-kpropd.service [ 6.898037] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/krb5-kpropd.socket [ 6.900256] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 6.902397] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/auditd.service [ 6.904446] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/pam_namespace.service [ 6.906420] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/shadow.service [ 6.908333] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/shadow.timer [ 6.910192] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/fstrim.service [ 6.912016] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/fstrim.timer [ 6.913777] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 6.915500] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 6.917175] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/uuidd.service [ 6.918800] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/uuidd.socket [ 6.920355] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/dm-event.service [ 6.921915] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/dm-event.socket [ 6.923449] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/dbus.service [ 6.924964] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/dbus.socket [ 6.926407] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/ip6tables.service [ 6.927831] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/iptables.service [ 6.930110] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/[email protected] \xe2\x86\x92 [email protected] [ 6.931600] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/basic.target [ 6.933085] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 6.934657] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/bluetooth.target [ 6.936130] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/boot-complete.target [ 6.937632] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/console-getty.service [ 6.939126] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 6.940631] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/cryptsetup-pre.target [ 6.942179] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/cryptsetup.target [ 6.944347] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/ctrl-alt-del.target \xe2\x86\x92 reboot.target [ 6.946586] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/dbus-org.freedesktop.hostname1.service \xe2\x86\x92 systemd-hostnamed.service [ 6.948141] usb 1-12: New USB device found, idVendor=0bda, idProduct=b00a, bcdDevice= 1.10 [ 6.949923] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/dbus-org.freedesktop.import1.service \xe2\x86\x92 systemd-importd.service [ 6.951214] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.951218] usb 1-12: Product: Bluetooth Radio [ 6.951221] usb 1-12: Manufacturer: Realtek [ 6.951224] usb 1-12: SerialNumber: 00e04c000001 [ 6.960240] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/dbus-org.freedesktop.locale1.service \xe2\x86\x92 systemd-localed.service [ 6.963512] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/dbus-org.freedesktop.login1.service \xe2\x86\x92 systemd-logind.service [ 6.967129] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/dbus-org.freedesktop.machine1.service \xe2\x86\x92 systemd-machined.service [ 6.971105] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/dbus-org.freedesktop.oom1.service \xe2\x86\x92 systemd-oomd.service [ 6.975430] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/dbus-org.freedesktop.portable1.service \xe2\x86\x92 systemd-portabled.service [ 6.980097] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/dbus-org.freedesktop.timedate1.service \xe2\x86\x92 systemd-timedated.service [ 6.984954] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/debug-shell.service [ 6.987737] systemd[1]: unit_file_build_name_map: alias: /usr/lib/systemd/system/default.target \xe2\x86\x92 graphical.target [ 6.990354] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/dev-hugepages.mount [ 6.993004] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/dev-mqueue.mount [ 6.995660] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/emergency.service [ 6.998322] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/emergency.target [ 7.000974] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/exit.target [ 7.003615] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/final.target [ 7.006254] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/first-boot-complete.target [ 7.008911] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/getty-pre.target [ 7.011574] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/getty.target [ 7.014226] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 7.016876] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/graphical.target [ 7.019531] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/halt.target [ 7.022186] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/hibernate.target [ 7.024847] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/hybrid-sleep.target [ 7.027513] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/initrd-cleanup.service [ 7.030139] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/initrd-fs.target [ 7.032744] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/initrd-parse-etc.service [ 7.035352] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/initrd-root-device.target [ 7.037972] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/initrd-root-fs.target [ 7.040576] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/initrd-switch-root.service [ 7.043185] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/initrd-switch-root.target [ 7.045788] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/initrd-udevadm-cleanup-db.service [ 7.048385] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/initrd.target [ 7.050982] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/kexec.target [ 7.053539] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/kmod-static-nodes.service [ 7.056091] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/ldconfig.service [ 7.058560] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/local-fs-pre.target [ 7.061013] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/local-fs.target [ 7.063340] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/machine.slice [ 7.065635] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/machines.target [ 7.067821] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 7.069984] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/multi-user.target [ 7.072149] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/network-online.target [ 7.074314] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/network-pre.target [ 7.076390] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/network.target [ 7.078380] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/nss-lookup.target [ 7.080285] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/nss-user-lookup.target [ 7.082114] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/paths.target [ 7.083838] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/poweroff.target [ 7.085486] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/printer.target [ 7.087037] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/proc-sys-fs-binfmt_misc.automount [ 7.088535] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/proc-sys-fs-binfmt_misc.mount [ 7.089934] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/quotaon.service [ 7.091252] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/reboot.target [ 7.092494] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/remote-cryptsetup.target [ 7.093651] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/remote-fs-pre.target [ 7.094730] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/remote-fs.target [ 7.095759] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/remote-veritysetup.target [ 7.096760] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/rescue.service [ 7.097755] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/rescue.target [ 7.098738] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/rpcbind.target [ 7.099729] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 7.100725] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/shutdown.target [ 7.101726] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/sigpwr.target [ 7.102714] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/sleep.target [ 7.103691] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/slices.target [ 7.104668] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/smartcard.target [ 7.105647] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/sockets.target [ 7.106628] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/sound.target [ 7.107608] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/suspend-then-hibernate.target [ 7.108608] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/suspend.target [ 7.109596] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/swap.target [ 7.110574] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/sys-fs-fuse-connections.mount [ 7.111581] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/sys-kernel-config.mount [ 7.112589] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/sys-kernel-debug.mount [ 7.113585] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/sys-kernel-tracing.mount [ 7.114596] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/sysinit.target [ 7.115592] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/syslog.socket [ 7.116586] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/system-systemd\x2dcryptsetup.slice [ 7.118571] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/system-update-cleanup.service [ 7.119742] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/system-update-pre.target [ 7.120901] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/system-update.target [ 7.122044] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-ask-password-console.path [ 7.123206] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-ask-password-console.service [ 7.125488] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-ask-password-wall.path [ 7.126811] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-ask-password-wall.service [ 7.128135] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 7.129455] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-binfmt.service [ 7.130771] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-bless-boot.service [ 7.132096] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-boot-check-no-failures.service [ 7.134745] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-boot-system-token.service [ 7.136252] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-coredump.socket [ 7.137755] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 7.139256] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-exit.service [ 7.140757] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-firstboot.service [ 7.142252] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-fsck-root.service [ 7.143740] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 7.145216] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-halt.service [ 7.146691] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/[email protected] [ 7.148178] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-hibernate.service [ 7.149658] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-homed-activate.service [ 7.151143] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-homed.service [ 7.152627] systemd[1]: unit_file_build_name_map: normal unit file: /usr/lib/systemd/system/systemd-hostnamed.service [ 7.324732] Linux agpgart interface v0.103 [ 7.339568] fuse: init (API version 7.33) [ 7.355563] systemd-journald[265]: Auditing in kernel turned on. [ 7.359014] systemd-journald[265]: Journal effective settings seal=no keyed_hash=yes compress=yes compress_threshold_bytes=512B [ 7.359112] systemd-journald[265]: Fixed min_use=16.0M max_use=313.3M max_size=39.1M min_size=512.0K keep_free=156.6M n_max_files=100 [ 7.367696] XFS: attr2 mount option is deprecated. [ 7.368118] systemd-journald[265]: Reserving 333 entries in field hash table. [ 7.372374] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 7.374992] Asymmetric key parser 'pkcs8' registered [ 7.377914] systemd-journald[265]: Reserving 71310 entries in data hash table. [ 7.381564] systemd-journald[265]: Vacuuming... [ 7.381627] systemd-journald[265]: Vacuuming done, freed 0B of archived journals from /run/log/journal/983425690c9a4432866996cdc56b7fd4. [ 7.381665] systemd-journald[265]: Flushing /dev/kmsg... [ 7.404037] audit: type=1130 audit(1625291560.226:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.412624] audit: type=1130 audit(1625291560.236:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.419004] audit: type=1131 audit(1625291560.236:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.427185] audit: type=1130 audit(1625291560.249:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.434060] audit: type=1131 audit(1625291560.249:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.444751] audit: type=1130 audit(1625291560.266:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.451199] audit: type=1131 audit(1625291560.266:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.462023] audit: type=1130 audit(1625291560.286:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.472536] audit: type=1130 audit(1625291560.296:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.554217] audit: type=1130 audit(1625291560.376:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 7.619871] systemd-journald[265]: systemd-journald running as PID 265 for the system. [ 7.620170] systemd-journald[265]: Sent READY=1 notification. [ 7.620230] systemd-journald[265]: Sent WATCHDOG=1 notification. [ 7.622326] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.636767] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.640546] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.645323] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.649119] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.649502] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.649868] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.650251] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.650623] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.651251] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.651514] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.652468] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.677672] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.680654] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.681201] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.681611] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.682019] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.682430] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.683685] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.698929] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.702646] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.711638] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 7.721958] systemd-journald[265]: n/a: New incoming connection. [ 7.723759] systemd-journald[265]: varlink-20: varlink: setting state idle-server [ 7.726435] systemd-journald[265]: varlink-20: New incoming message: {"method":"io.systemd.Journal.FlushToVar","parameters":{}} [ 7.730145] systemd-journald[265]: varlink-20: varlink: changing state idle-server \xe2\x86\x92 processing-method [ 7.732073] systemd-journald[265]: Received client request to flush runtime journal. [ 7.734994] systemd-journald[265]: Journal effective settings seal=yes keyed_hash=yes compress=yes compress_threshold_bytes=512B [ 7.741586] systemd-journald[265]: Fixed min_use=16.0M max_use=4.0G max_size=128.0M min_size=512.0K keep_free=4.0G n_max_files=100 [ 7.758328] systemd-journald[265]: Flushing to /var/log/journal/983425690c9a4432866996cdc56b7fd4... [ 7.760632] systemd-journald[265]: Considering root directory '/run/log/journal'. [ 7.762999] systemd-journald[265]: Root directory /run/log/journal added. [ 7.765265] systemd-journald[265]: Considering directory '/run/log/journal/983425690c9a4432866996cdc56b7fd4'. [ 7.767501] systemd-journald[265]: Directory /run/log/journal/983425690c9a4432866996cdc56b7fd4 added. [ 7.769900] systemd-journald[265]: Journal effective settings seal=no keyed_hash=yes compress=no compress_threshold_bytes=8B [ 7.772279] systemd-journald[265]: File /run/log/journal/983425690c9a4432866996cdc56b7fd4/system.journal added. [ 7.774603] systemd-journald[265]: Considering root directory '/var/log/journal'. [ 7.776898] systemd-journald[265]: Considering root directory '/var/log/journal/remote'. [ 8.150185] systemd-journald[265]: Root directory /run/log/journal removed. [ 8.152553] systemd-journald[265]: Directory /run/log/journal/983425690c9a4432866996cdc56b7fd4 removed. [ 8.154907] systemd-journald[265]: mmap cache statistics: 109427 context cache hit, 3 window list hit, 1 miss [ 8.157320] systemd-journald[265]: Journal effective settings seal=no keyed_hash=yes compress=yes compress_threshold_bytes=512B [ 8.162642] systemd-journald[265]: Vacuuming... [ 8.221524] systemd-journald[265]: Vacuuming done, freed 0B of archived journals from /var/log/journal/983425690c9a4432866996cdc56b7fd4. [ 8.232172] systemd-journald[265]: varlink-20: Sending message: {"parameters":{}} [ 8.234888] systemd-journald[265]: varlink-20: varlink: changing state processing-method \xe2\x86\x92 processed-method [ 8.237737] systemd-journald[265]: varlink-20: varlink: changing state processed-method \xe2\x86\x92 idle-server [ 8.243581] systemd-journald[265]: varlink-20: Got POLLHUP from socket. [ 8.246412] systemd-journald[265]: varlink-20: varlink: changing state idle-server \xe2\x86\x92 pending-disconnect [ 8.249306] systemd-journald[265]: varlink-20: varlink: changing state pending-disconnect \xe2\x86\x92 processing-disconnect [ 8.252261] systemd-journald[265]: varlink-20: varlink: changing state processing-disconnect \xe2\x86\x92 disconnected [ 8.308619] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 8.517310] acpi_cpufreq: overriding BIOS provided _PSD data [ 8.540118] acpi-tad ACPI000E:00: Missing _PRW [ 8.607758] ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 8.618373] acpi device:1e: registered as cooling_device8 [ 8.626848] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input2 [ 8.825614] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 8.902194] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.0/0003:046D:C534.0001/input/input3 [ 8.939361] ccp 0000:0c:00.2: enabling device (0100 -> 0102) [ 8.955972] ccp 0000:0c:00.2: ccp: unable to access the device: you might be running a broken BIOS. [ 8.963592] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 8.970655] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 [ 8.971435] ccp 0000:0c:00.2: tee enabled [ 8.983107] ccp 0000:0c:00.2: psp enabled [ 8.993491] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 8.997884] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 9.001767] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 9.007282] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input4 [ 9.019415] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input5 [ 9.034973] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 9.046118] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9.054500] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 9.057035] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 9.059986] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 9.081027] libphy: r8169: probed [ 9.082100] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input6 [ 9.087214] r8169 0000:0a:00.0 eth0: RTL8168h/8111h, 00:68:eb:ad:98:43, XID 541, IRQ 91 [ 9.094618] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 [ 9.097120] r8169 0000:0a:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 9.104420] usbcore: registered new interface driver usbhid [ 9.112544] usbhid: USB HID core driver [ 9.124878] Bluetooth: Core ver 2.22 [ 9.130875] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 9.144288] NET: Registered protocol family 31 [ 9.149041] Bluetooth: HCI device and connection manager initialized [ 9.153017] Bluetooth: HCI socket layer initialized [ 9.156925] Bluetooth: L2CAP socket layer initialized [ 9.160735] Bluetooth: SCO socket layer initialized [ 9.209776] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.215973] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 9.237135] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.242388] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.243515] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 9.251002] cfg80211: failed to load regulatory.db [ 9.258468] usbcore: registered new interface driver btusb [ 9.263470] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821 [ 9.271407] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 9.276096] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin [ 9.282586] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin [ 9.286578] cryptd: max_cpu_qlen set to 1000 [ 9.290204] Bluetooth: hci0: RTL: cfg_sz 10, total sz 31990 [ 9.304981] irq 7: nobody cared (try booting with the "irqpoll" option) [ 9.308994] CPU: 4 PID: 308 Comm: systemd-udevd Tainted: G B 5.12.0-rc3-debug #1 [ 9.313266] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 9.317902] Call Trace: [ 9.322386] <IRQ> [ 9.326452] dump_stack+0x9c/0xcf [ 9.330599] __report_bad_irq+0x43/0xde [ 9.334691] note_interrupt.cold+0x28/0x8b [ 9.339026] ? add_interrupt_randomness+0x152/0x270 [ 9.343255] handle_irq_event+0x14e/0x160 [ 9.347069] ? handle_irq_event_percpu+0xf0/0xf0 [ 9.350865] ? _raw_spin_lock+0x81/0xe0 [ 9.354551] ? _raw_spin_lock_bh+0xe0/0xe0 [ 9.358106] handle_fasteoi_irq+0xfa/0x370 [ 9.361574] __common_interrupt+0x4f/0xc0 [ 9.365067] common_interrupt+0x7b/0xa0 [ 9.368562] </IRQ> [ 9.371968] asm_common_interrupt+0x1e/0x40 [ 9.375328] RIP: 0010:mpihelp_submul_1+0x4a/0x100 [ 9.378586] Code: 48 83 ec 20 48 89 5c 24 08 31 db 48 89 7c 24 10 48 89 74 24 18 48 89 04 24 eb 03 49 63 c5 48 2b 04 24 4c 8d 34 c5 00 00 00 00 <48> 8b 44 24 18 4e 8d 24 30 4c 89 e7 e8 55 85 c4 ff 49 8b 34 24 48 [ 9.385354] RSP: 0018:ffffc90001dc7360 EFLAGS: 00000202 [ 9.388625] RAX: 000000000000003d RBX: 58b15c7a1664d4fd RCX: ffffffff92809c85 [ 9.391896] RDX: dffffc0000000000 RSI: 95a5834bb0a7f6e5 RDI: ffff8881035301e8 [ 9.395056] RBP: 00000000901b3ef1 R08: 6ee397ce901b3ef1 R09: 000000003f8f75f4 [ 9.398127] R10: fffffbfff298d729 R11: 0000000000000001 R12: 7c892be55ef82e4f [ 9.401275] R13: 00000000fffffffd R14: 00000000000001e8 R15: 58b15c7972392b28 [ 9.404440] ? mpihelp_submul_1+0xd5/0x100 [ 9.407665] mpihelp_divrem+0x167/0x9e0 [ 9.410828] mpi_powm+0x86e/0xe00 [ 9.413898] ? mpihelp_mul_karatsuba_case+0x5b0/0x5b0 [ 9.416845] ? asm_common_interrupt+0x1e/0x40 [ 9.419918] ? __sg_page_iter_next+0xa7/0x100 [ 9.422804] ? mpihelp_cmp+0x4f/0x80 [ 9.425790] rsa_enc+0x140/0x1f0 [ 9.428676] ? rsa_dec+0x1f0/0x1f0 [ 9.431576] pkcs1pad_verify+0x296/0x320 [ 9.434458] public_key_verify_signature+0x548/0x6f0 [ 9.437358] ? software_key_eds_op+0x620/0x620 [ 9.440180] ? keyring_search+0x136/0x190 [ 9.442934] ? common_interrupt+0x1c/0xa0 [ 9.445676] ? asm_common_interrupt+0x1e/0x40 [ 9.448371] ? pkcs7_validate_trust+0x2f7/0x330 [ 9.451023] pkcs7_validate_trust+0x303/0x330 [ 9.453667] verify_pkcs7_message_sig+0xe2/0x190 [ 9.456285] ? restrict_link_by_builtin_trusted+0x20/0x20 [ 9.458959] ? kfree+0xc3/0x480 [ 9.461558] verify_pkcs7_signature+0x4c/0x80 [ 9.464115] mod_verify_sig+0xe6/0x130 [ 9.466542] ? is_module_text_address+0x30/0x30 [ 9.469037] ? common_interrupt+0x1c/0xa0 [ 9.471471] load_module+0x48f/0x41a0 [ 9.473945] ? __kernel_read+0x338/0x4f0 [ 9.476449] ? __kernel_read+0x340/0x4f0 [ 9.478938] ? __x64_sys_sendfile64+0x140/0x140 [ 9.481427] ? module_frob_arch_sections+0x20/0x20 [ 9.481442] ? kernel_read+0x46/0xb0 [ 9.481450] ? kernel_read_file+0x1d2/0x3e0 [ 9.481458] ? __x64_sys_fspick+0x230/0x230 [ 9.481464] ? kasan_check_range+0x185/0x1d0 [ 9.481470] ? _raw_write_unlock+0x30/0x30 [ 9.481478] ? __do_sys_finit_module+0x110/0x1a0 [ 9.481484] __do_sys_finit_module+0x110/0x1a0 [ 9.481491] ? __ia32_sys_init_module+0x40/0x40 [ 9.481496] ? get_nth_filter.part.0+0x170/0x170 [ 9.481503] ? rcu_momentary_dyntick_idle+0x50/0x50 [ 9.481512] ? __do_softirq+0x209/0x3be [ 9.481517] ? __audit_syscall_entry+0x193/0x1f0 [ 9.481522] ? ktime_get_coarse_real_ts64+0x4a/0x70 [ 9.516734] do_syscall_64+0x33/0x40 [ 9.516747] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 9.516754] RIP: 0033:0x7f079a72618d [ 9.516759] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 9.516763] RSP: 002b:00007ffdde055848 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 9.516768] RAX: ffffffffffffffda RBX: 0000559b1868c870 RCX: 00007f079a72618d [ 9.516772] RDX: 0000000000000000 RSI: 00007f079a883a9d RDI: 0000000000000015 [ 9.516774] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000559b1868c870 [ 9.516777] R10: 0000000000000015 R11: 0000000000000246 R12: 00007f079a883a9d [ 9.516779] R13: 0000000000000000 R14: 0000559b1869b820 R15: 0000559b1868c870 [ 9.516785] handlers: [ 9.516786] [<00000000619962db>] amd_gpio_irq_handler [pinctrl_amd] [ 9.516796] Disabling IRQ #7 [ 9.518500] AVX2 version of gcm_enc/dec engaged. [ 9.518550] AES CTR mode by8 optimization enabled [ 9.518794] snd_hda_intel 0000:0c:00.1: enabling device (0100 -> 0102) [ 9.519962] snd_hda_intel 0000:0c:00.1: Handle vga_switcheroo audio client [ 9.570729] snd_hda_intel 0000:0c:00.6: enabling device (0100 -> 0102) [ 9.614031] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input10 [ 9.705675] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC671: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 9.708420] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 9.708761] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.714896] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 9.718876] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 9.718897] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 9.718904] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 9.718915] snd_hda_codec_realtek hdaudioC1D0: Line=0x1b [ 9.749261] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 9.770716] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input11 [ 9.771375] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input12 [ 9.771987] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input13 [ 9.772603] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input14 [ 9.797844] rtw_8821ce 0000:09:00.0: enabling device (0100 -> 0103) [ 9.798837] rtw_8821ce 0000:09:00.0: Firmware version 24.8.0, H2C version 12 [ 9.861369] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 9.920626] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 9.968295] kvm: Nested Virtualization enabled [ 9.970665] [drm] amdgpu kernel modesetting enabled. [ 9.971787] SVM: kvm: Nested Paging enabled [ 9.975655] Virtual CRAT table created for CPU [ 9.977941] SVM: Virtual VMLOAD VMSAVE supported [ 9.977945] SVM: Virtual GIF supported [ 9.989227] amdgpu: Topology: Add CPU node [ 9.993923] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 9.998240] fb0: switching to amdgpudrmfb from EFI VGA [ 10.002978] Console: switching to colour dummy device 80x25 [ 10.003328] amdgpu 0000:0c:00.0: vgaarb: deactivate vga console [ 10.004163] amdgpu 0000:0c:00.0: enabling device (0106 -> 0107) [ 10.005925] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87D6 0xCA). [ 10.005985] amdgpu 0000:0c:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) [ 10.006259] [drm] register mmio base: 0xFCA00000 [ 10.006288] [drm] register mmio size: 524288 [ 10.006317] [drm] PCIE atomic ops is not supported [ 10.007372] [drm] add ip block number 0 <soc15_common> [ 10.007411] [drm] add ip block number 1 <gmc_v9_0> [ 10.007474] [drm] add ip block number 2 <vega10_ih> [ 10.007492] [drm] add ip block number 3 <psp> [ 10.007498] [drm] add ip block number 4 <smu> [ 10.007505] [drm] add ip block number 5 <gfx_v9_0> [ 10.007512] [drm] add ip block number 6 <sdma_v4_0> [ 10.007520] [drm] add ip block number 7 <dm> [ 10.007527] [drm] add ip block number 8 <vcn_v2_0> [ 10.007562] [drm] add ip block number 9 <jpeg_v2_0> [ 10.007700] amdgpu 0000:0c:00.0: amdgpu: Fetched VBIOS from VFCT [ 10.007815] amdgpu: ATOM BIOS: 113-RENOIR-026 [ 10.010428] [drm] VCN decode is enabled in VM mode [ 10.010443] [drm] VCN encode is enabled in VM mode [ 10.010448] [drm] JPEG decode is enabled in VM mode [ 10.011043] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 10.011118] amdgpu 0000:0c:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [ 10.011133] amdgpu 0000:0c:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 10.011146] amdgpu 0000:0c:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 10.011192] [drm] Detected VRAM RAM=512M, BAR=512M [ 10.011201] [drm] RAM width 64bits DDR4 [ 10.011685] [TTM] Zone kernel: Available graphics memory: 3208866 KiB [ 10.011699] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 10.046111] MCE: In-kernel MCE decoding enabled. [ 10.050870] [drm] amdgpu: 512M of VRAM memory ready [ 10.050941] [drm] amdgpu: 3072M of GTT memory ready. [ 10.051000] general protection fault, probably for non-canonical address 0xff2439eaff279143: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 10.051018] CPU: 1 PID: 294 Comm: systemd-udevd Tainted: G B 5.12.0-rc3-debug #1 [ 10.051033] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 10.051043] RIP: 0010:native_queued_spin_lock_slowpath+0x317/0x490 [ 10.051064] Code: 3c d5 00 d9 db 93 48 89 14 24 49 81 c7 40 57 03 00 e8 9d f2 2c 00 48 8b 14 24 4c 03 3c d5 00 d9 db 93 4c 89 ff e8 29 f3 2c 00 <49> 89 2f eb 02 f3 90 4c 89 f7 e8 3a f1 2c 00 8b 45 08 85 c0 74 ef [ 10.051087] RSP: 0018:ffffc9000089f050 EFLAGS: 00010086 [ 10.051099] RAX: 0000000000000000 RBX: ffff8881d7830024 RCX: ffffffff92182ed7 [ 10.051110] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ff2439eaff279143 [ 10.051121] RBP: ffff8881d6a75740 R08: 0000000000000001 R09: ffff8881d7830027 [ 10.051132] R10: ffffed103af06004 R11: 0000000000000001 R12: 0000000000080000 [ 10.051143] R13: 1ffff92000113e0b R14: ffff8881d6a75748 R15: ff2439eaff279143 [ 10.051155] FS: 00007f0799df6a40(0000) GS:ffff8881d6a40000(0000) knlGS:0000000000000000 [ 10.051168] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 10.051179] CR2: 00007f14f6fa9f10 CR3: 000000010a888000 CR4: 0000000000350ee0 [ 10.051190] Call Trace: [ 10.051197] ? .slowpath+0xe/0xe [ 10.051207] ? kasan_save_stack+0x32/0x40 [ 10.051223] ? __kasan_kmalloc+0x99/0xc0 [ 10.051235] ? amdgpu_ttm_init.cold+0x153/0x16f [amdgpu] [ 10.052171] ? gmc_v9_0_sw_init+0x64c/0x980 [amdgpu] [ 10.053184] ? amdgpu_device_init.cold+0x1483/0x2400 [amdgpu] [ 10.054225] ? amdgpu_driver_load_kms+0xb1/0x3f0 [amdgpu] [ 10.055217] ? amdgpu_pci_probe+0x172/0x200 [amdgpu] [ 10.056218] ? local_pci_probe+0x74/0xc0 [ 10.056234] _raw_spin_lock_irqsave+0xe0/0xf0 [ 10.056247] ? _raw_write_unlock_bh+0x30/0x30 [ 10.056257] ? __do_sys_finit_module+0x110/0x1a0 [ 10.056271] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 10.056285] swiotlb_tbl_map_single+0x1de/0x6f0 [ 10.056298] ? irq_work_queue+0xb/0x40 [ 10.056314] ? add_hole+0x294/0x310 [drm] [ 10.056457] swiotlb_map+0xc1/0x3f0 [ 10.056467] ? drm_mm_init+0x126/0x140 [drm] [ 10.056607] ? swiotlb_sync_single_for_cpu+0x20/0x20 [ 10.056620] ? ttm_range_man_init+0xdd/0x100 [ttm] [ 10.056650] ? amdgpu_ttm_init.cold+0x153/0x16f [amdgpu] [ 10.057586] dma_map_page_attrs+0x299/0x390 [ 10.057599] ? dmam_free_coherent+0xe0/0xe0 [ 10.057611] amdgpu_gart_init+0x77/0xf0 [amdgpu] [ 10.058480] gmc_v9_0_sw_init+0x910/0x980 [amdgpu] [ 10.059373] ? gmc_v9_0_late_init+0xe0/0xe0 [amdgpu] [ 10.060260] ? __drmm_add_action+0xf0/0x140 [drm] [ 10.060386] ? drm_mode_config_cleanup+0x480/0x480 [drm] [ 10.060513] ? drm_mode_config_cleanup+0x480/0x480 [drm] [ 10.060641] amdgpu_device_init.cold+0x1483/0x2400 [amdgpu] [ 10.061600] ? amdgpu_device_cache_pci_state+0x90/0x90 [amdgpu] [ 10.062639] ? pci_find_saved_ext_cap+0x80/0x80 [ 10.062654] ? pci_enable_device_flags+0xcb/0x250 [ 10.062667] ? pci_enable_device_flags+0x19c/0x250 [ 10.062679] ? pci_enable_bridge+0xe0/0xe0 [ 10.062690] amdgpu_driver_load_kms+0xb1/0x3f0 [amdgpu] [ 10.063709] amdgpu_pci_probe+0x172/0x200 [amdgpu] [ 10.064737] ? amdgpu_pci_remove+0x80/0x80 [amdgpu] [ 10.065697] local_pci_probe+0x74/0xc0 [ 10.065710] pci_device_probe+0x1ee/0x300 [ 10.065721] ? pci_device_remove+0x100/0x100 [ 10.065732] ? kernfs_put+0x18/0x30 [ 10.065741] ? sysfs_do_create_link_sd+0x76/0xd0 [ 10.065754] really_probe+0x185/0x6c0 [ 10.065764] driver_probe_device+0x13f/0x1d0 [ 10.065774] device_driver_attach+0x110/0x120 [ 10.065784] ? device_driver_attach+0x120/0x120 [ 10.065793] __driver_attach+0xae/0x1a0 [ 10.065803] ? device_driver_attach+0x120/0x120 [ 10.065812] bus_for_each_dev+0xe6/0x140 [ 10.065823] ? subsys_dev_iter_exit+0x10/0x10 [ 10.065833] ? __list_add_valid+0x2b/0xa0 [ 10.065844] bus_add_driver+0x1f8/0x2e0 [ 10.065857] driver_register+0x10f/0x190 [ 10.065866] ? 0xffffffffc133b000 [ 10.065875] do_one_initcall+0x89/0x2a0 [ 10.065886] ? perf_trace_initcall_level+0x230/0x230 [ 10.065897] ? kfree+0xc3/0x480 [ 10.065907] ? kasan_set_track+0x1c/0x30 [ 10.065917] ? kasan_unpoison+0x3a/0x60 [ 10.065927] ? kasan_unpoison+0x3a/0x60 [ 10.065938] do_init_module+0xfd/0x3c0 [ 10.065950] load_module+0x3f44/0x41a0 [ 10.065961] ? xfs_file_buffered_read+0x82/0x130 [xfs] [ 10.066346] ? module_frob_arch_sections+0x20/0x20 [ 10.066358] ? kernel_read+0x46/0xb0 [ 10.066369] ? kernel_read_file+0x1d2/0x3e0 [ 10.066384] ? __do_sys_finit_module+0x110/0x1a0 [ 10.066394] __do_sys_finit_module+0x110/0x1a0 [ 10.066404] ? __ia32_sys_init_module+0x40/0x40 [ 10.066414] ? get_nth_filter.part.0+0x170/0x170 [ 10.066426] ? randomize_stack_top+0x80/0x80 [ 10.066436] ? __ia32_compat_sys_newlstat+0x30/0x30 [ 10.066450] ? __audit_syscall_entry+0x193/0x1f0 [ 10.066459] ? ktime_get_coarse_real_ts64+0x4a/0x70 [ 10.066471] do_syscall_64+0x33/0x40 [ 10.066482] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 10.066494] RIP: 0033:0x7f079a72618d [ 10.066502] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 10.066522] RSP: 002b:00007ffdde055848 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 10.066535] RAX: ffffffffffffffda RBX: 0000559b1868c810 RCX: 00007f079a72618d [ 10.066545] RDX: 0000000000000000 RSI: 00007f079a883a9d RDI: 0000000000000018 [ 10.066554] RBP: 0000000000020000 R08: 0000000000000000 R09: 00007f079aab65ea [ 10.066564] R10: 0000000000000018 R11: 0000000000000246 R12: 00007f079a883a9d [ 10.066573] R13: 0000000000000000 R14: 0000559b18690b60 R15: 0000559b1868c810 [ 10.066585] Modules linked in: edac_mce_amd fjes(-) kvm_amd rtw88_8821ce kvm rtw88_8821c rtw88_pci amdgpu(+) rtw88_core irqbypass snd_hda_codec_realtek crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi mac80211 aesni_intel snd_hda_intel snd_intel_dspcfg crypto_simd cryptd gpu_sched snd_intel_sdw_acpi btusb i2c_algo_bit snd_hda_codec btrtl drm_ttm_helper btbcm btintel rapl ttm snd_hda_core drm_kms_helper cfg80211 snd_hwdep bluetooth sp5100_tco vfat pcspkr snd_pcm ecdh_generic k10temp fat r8169 i2c_piix4 cec snd_timer syscopyarea realtek sysfillrect snd mdio_devres sysimgblt rfkill ccp fb_sys_fops soundcore libphy libarc4 ecc usbhid crc16 wmi tpm_crb tpm_tis tpm_tis_core video tpm gpio_amdpt gpio_generic rng_core pinctrl_amd mac_hid acpi_tad acpi_cpufreq pkcs8_key_parser drm fuse agpgart bpf_preload ip_tables x_tables xfs libcrc32c crc32c_generic crc32c_intel xhci_pci xhci_pci_renesas [ 10.066824] ---[ end trace f566d89392370240 ]--- [ 10.066831] RIP: 0010:native_queued_spin_lock_slowpath+0x317/0x490 [ 10.066844] Code: 3c d5 00 d9 db 93 48 89 14 24 49 81 c7 40 57 03 00 e8 9d f2 2c 00 48 8b 14 24 4c 03 3c d5 00 d9 db 93 4c 89 ff e8 29 f3 2c 00 <49> 89 2f eb 02 f3 90 4c 89 f7 e8 3a f1 2c 00 8b 45 08 85 c0 74 ef [ 10.066863] RSP: 0018:ffffc9000089f050 EFLAGS: 00010086 [ 10.066873] RAX: 0000000000000000 RBX: ffff8881d7830024 RCX: ffffffff92182ed7 [ 10.066882] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ff2439eaff279143 [ 10.066892] RBP: ffff8881d6a75740 R08: 0000000000000001 R09: ffff8881d7830027 [ 10.066903] R10: ffffed103af06004 R11: 0000000000000001 R12: 0000000000080000 [ 10.066913] R13: 1ffff92000113e0b R14: ffff8881d6a75748 R15: ff2439eaff279143 [ 10.066924] FS: 00007f0799df6a40(0000) GS:ffff8881d6a40000(0000) knlGS:0000000000000000 [ 10.066936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 10.066944] CR2: 00007f14f6fa9f10 CR3: 000000010a888000 CR4: 0000000000350ee0 [ 10.066955] note: systemd-udevd[294] exited with preempt_count 1 [ 10.074564] systemd-journald[265]: Compressed data object 946 -> 537 using ZSTD [ 10.076050] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 10.089990] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 10.114635] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 10.226512] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 10.234727] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 10.249690] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 10.292469] r8169 0000:0a:00.0 enp10s0: renamed from eth0 [ 10.321331] input: HP WMI hotkeys as /devices/virtual/input/input15 [ 10.356875] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 [ 10.478801] intel_rapl_common: Found RAPL domain package [ 10.478843] intel_rapl_common: Found RAPL domain core [ 10.561785] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 [ 10.601569] Bluetooth: hci0: RTL: fw version 0x829a7644 [ 10.633053] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 10.635027] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 10.635611] input: Logitech Wireless Keyboard PID:4075 Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input16 [ 10.638901] hid-generic 0003:046D:4075.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 [ 10.640688] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input21 [ 10.641990] hid-generic 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:01:00.0-11/input1:2 [ 10.688794] mousedev: PS/2 mouse device common for all mice [ 10.918080] input: Logitech Wireless Keyboard PID:4075 as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input25 [ 10.923263] logitech-hidpp-device 0003:046D:4075.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 [ 10.933008] rtw_8821ce 0000:09:00.0: start vif 74:12:b3:a0:4a:cb on port 0 [ 10.981496] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input26 [ 10.983168] logitech-hidpp-device 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:01:00.0-11/input1:2 [ 11.004242] Generic FE-GE Realtek PHY r8169-a00:00: attached PHY driver (mii_bus:phy_addr=r8169-a00:00, irq=MAC) [ 11.174788] r8169 0000:0a:00.0 enp10s0: Link is Down [ 14.177070] r8169 0000:0a:00.0 enp10s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 14.177144] IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready [ 15.422075] kauditd_printk_skb: 28 callbacks suppressed [ 15.422088] audit: type=1131 audit(1625291568.246:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.356047] audit: type=1101 audit(1625291574.179:41): pid=416 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' [ 21.363309] audit: type=1103 audit(1625291574.186:42): pid=416 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' [ 21.363633] audit: type=1006 audit(1625291574.186:43): pid=416 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 [ 21.363684] audit: type=1300 audit(1625291574.186:43): arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffc39581740 a2=4 a3=3e8 items=0 ppid=373 pid=416 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="sshd" exe="/usr/bin/sshd" key=(null) [ 21.363717] audit: type=1327 audit(1625291574.186:43): proctitle=737368643A206E617468616E205B707269765D [ 21.395973] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 21.432227] audit: type=1130 audit(1625291574.256:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.440727] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 21.454764] audit: type=1101 audit(1625291574.279:45): pid=419 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.454837] audit: type=1103 audit(1625291574.279:46): pid=419 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' [ 21.455123] audit: type=1006 audit(1625291574.279:47): pid=419 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1 [ 21.455183] audit: type=1300 audit(1625291574.279:47): arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7ffe190ef1b0 a2=4 a3=3e8 items=0 ppid=1 pid=419 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null) [ 21.465054] systemd-journald[265]: Journal effective settings seal=yes keyed_hash=yes compress=yes compress_threshold_bytes=512B [ 21.466322] systemd-journald[265]: Fixed min_use=848.1M max_use=4.0G max_size=128.0M min_size=512.0K keep_free=4.0G n_max_files=100 [ 21.493502] systemd-journald[265]: Journal effective settings seal=no keyed_hash=yes compress=yes compress_threshold_bytes=512B [ 21.629644] systemd-journald[265]: Successfully sent stream file descriptor to service manager. [ 21.681781] systemd-journald[265]: Data hash table of /var/log/journal/983425690c9a4432866996cdc56b7fd4/system.journal has a fill level at 75.0 (174763 of 233016 items, 109051904 file size, 623 bytes per hash table item), suggesting rotation. [ 21.681842] systemd-journald[265]: /var/log/journal/983425690c9a4432866996cdc56b7fd4/system.journal: Journal header limits reached or header out-of-date, rotating. [ 21.681883] systemd-journald[265]: Rotating... [ 21.684864] systemd-journald[265]: Journal effective settings seal=yes keyed_hash=yes compress=yes compress_threshold_bytes=512B [ 21.692779] systemd-journald[265]: Reserving 333 entries in field hash table. [ 21.693953] systemd-journald[265]: Reserving 233016 entries in data hash table. [ 21.728897] systemd-journald[265]: Reserving 333 entries in field hash table. [ 21.730060] systemd-journald[265]: Reserving 233016 entries in data hash table. [ 21.742082] systemd-journald[265]: Failed to parse UID from file name 'user-1000@a73e8f336cda47d99c78d917f661fa32-00000000000005cf-0005c5f19f949d34.journal', ignoring: Invalid argument [ 21.742154] systemd-journald[265]: Failed to parse UID from file name 'user-1000@2d53deb7d71c4bdb85af714a4c578449-000000000003a0f5-0005c630924d4800.journal', ignoring: Invalid argument [ 21.742209] systemd-journald[265]: Failed to parse UID from file name 'user-1000@2d53deb7d71c4bdb85af714a4c578449-000000000004b76d-0005c630bea3393f.journal', ignoring: Invalid argument [ 21.742267] systemd-journald[265]: Failed to parse UID from file name 'user-1000@2d53deb7d71c4bdb85af714a4c578449-0000000000081997-0005c6314a613b2b.journal', ignoring: Invalid argument [ 21.742342] systemd-journald[265]: Vacuuming... [ 21.752710] systemd-journald[265]: Vacuuming done, freed 0B of archived journals from /var/log/journal/983425690c9a4432866996cdc56b7fd4. [ 21.752772] systemd-journald[265]: Journal effective settings seal=no keyed_hash=yes compress=yes compress_threshold_bytes=512B [ 24.053852] systemd-journald[265]: Compressed data object 628 -> 263 using ZSTD [ 27.567518] kauditd_printk_skb: 11 callbacks suppressed [ 27.567531] audit: type=1100 audit(1625291580.389:56): pid=582 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="nathan" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 27.571597] audit: type=1101 audit(1625291580.396:57): pid=582 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 27.572223] audit: type=1110 audit(1625291580.396:58): pid=582 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 27.573162] audit: type=1105 audit(1625291580.396:59): pid=582 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success'
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 62 lines · Nathan Chancellor
Hi Will and Robin,
Quoted 51 lines · Robin Murphy
Quoted 50 lines · Will Deacon
Hi Nathan,
Quoted 47 lines · Nathan Chancellor
Quoted 35 lines · Will Deacon
Quoted 34 lines · Nathan Chancellor
Quoted 32 lines · Will Deacon
Quoted 6 lines · Claire Chang
BUG: unable to handle page fault for address: 00000000003a8290and the fact it crashed at_raw_spin_lock_irqsavelook like the memory (maybedev->dma_io_tlb_mem) was corrupted?
Thedev->dma_io_tlb_memshould be set here
(https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/probe.c#n2528)
throughdevice_initialize.I'm less sure about this. '
dma_io_tlb_mem' should be pointing at 'io_tlb_default_mem', which is a page-aligned allocation from memblock. The spinlock is at offset0x24in that structure, and looking at the register dump from the crash:Jun 29 18:28:42 hp-4300G kernel: RSP: 0018:ffffadb4013db9e8 EFLAGS: 00010006 Jun 29 18:28:42 hp-4300G kernel: RAX: 00000000003a8290 RBX: 0000000000000000 RCX: ffff8900572ad580 Jun 29 18:28:42 hp-4300G kernel: RDX: ffff89005653f024 RSI: 00000000000c0000 RDI: 0000000000001d17 Jun 29 18:28:42 hp-4300G kernel: RBP: 000000000a20d000 R08: 00000000000c0000 R09: 0000000000000000 Jun 29 18:28:42 hp-4300G kernel: R10: 000000000a20d000 R11: ffff89005653f000 R12: 0000000000000212 Jun 29 18:28:42 hp-4300G kernel: R13: 0000000000001000 R14: 0000000000000002 R15: 0000000000200000 Jun 29 18:28:42 hp-4300G kernel: FS: 00007f1f8898ea40(0000) GS:ffff890057280000(0000) knlGS:0000000000000000 Jun 29 18:28:42 hp-4300G kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jun 29 18:28:42 hp-4300G kernel: CR2: 00000000003a8290 CR3: 00000001020d0000 CR4: 0000000000350ee0 Jun 29 18:28:42 hp-4300G kernel: Call Trace: Jun 29 18:28:42 hp-4300G kernel: _raw_spin_lock_irqsave+0x39/0x50 Jun 29 18:28:42 hp-4300G kernel: swiotlb_tbl_map_single+0x12b/0x4c0Then that correlates with R11 holding the '
dma_io_tlb_mem' pointer and RDX pointing at the spinlock. Yet RAX is holding junk :/I agree that enabling KASAN would be a good idea, but I also think we probably need to get some more information out of
swiotlb_tbl_map_single()to see see what exactly is going wrong in there.Quoted 7 lines
Quoted 2 lines
I can certainly enable KASAN and if there is any debug print I can add or dump anything, let me know!
I bit the bullet and took v5.13 with swiotlb/for-linus-5.14 merged in, built x86 defconfig and ran it on my laptop. However, it seems to work fine!
Please can you share your .config?
Sure thing, it is attached. It is just Arch Linux's config run through olddefconfig. The original is below in case you need to diff it.
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
If there is anything more that I can provide, please let me know.
I eventually got this booting (for some reason it was causing LD to SEGV trying to link it for a while...) and sadly it works fine on my laptop. Hmm.
Quoted 7 lines
Seems like it might be something specific to the amdgpu module?
Quoted 1 line
Quoted 1 line
Did you manage to try again with KASAN?
Yes, it took a few times to reproduce the issue but I did manage to get a dmesg, please find it attached. I build from commit
7d31f1c65cc9("swiotlb:
fix implicit debugfs declarations") in Konrad's tree.
Looking at the logs, the use-after-free bug looked somehow relevant (and it's nvme again. Qian's crash is about nvme too):
[ 2.468288] BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.468288] Read of size 8 at addr ffff8881d7830000 by task swapper/0/0
[ 2.468288] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 [ 2.468288] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 2.468288] Call Trace: [ 2.468288] <IRQ> [ 2.479433] dump_stack+0x9c/0xcf [ 2.479433] print_address_description.constprop.0+0x18/0x130 [ 2.479433] ? __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.479433] kasan_report.cold+0x7f/0x111 [ 2.479433] ? __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.479433] __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.479433] nvme_pci_complete_rq+0x73/0x130 [ 2.479433] blk_complete_reqs+0x6f/0x80 [ 2.479433] __do_softirq+0xfc/0x3be [ 2.479433] irq_exit_rcu+0xce/0x120 [ 2.479433] common_interrupt+0x80/0xa0 [ 2.479433] </IRQ> [ 2.479433] asm_common_interrupt+0x1e/0x40 [ 2.479433] RIP: 0010:cpuidle_enter_state+0xf9/0x590
I wonder if this ended up unmapping something wrong and messing up the dev->dma_io_tlb_mem (i.e. io_tlb_default_mem)?
Could you try this patch on top of 7d31f1c65cc9? This patch helps check if we try to unmap the wrong address.
```
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index b7f76bca89bf..5ac08d50a394 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -613,6 +613,21 @@ void swiotlb_tbl_unmap_single(struct device *dev,
phys_addr_t tlb_addr,
size_t mapping_size, enum dma_data_direction dir,
unsigned long attrs)
{
+ struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
+ unsigned int offset = swiotlb_align_offset(dev, tlb_addr);
+ int index;
+
+ if (!is_swiotlb_buffer(dev, tlb_addr - offset)) {
+ dev_err(dev, "%s: attempt to unmap invalid address
(0x%llx, offset=%u)\n", __func__, tlb_addr, offset);
+ return;
+ }
+
+ index = (tlb_addr - offset - mem->start) >> IO_TLB_SHIFT;
+ if (mem->slots[index].orig_addr == INVALID_PHYS_ADDR) {
+ dev_err(dev, "%s: memory is not mapped before (0x%llx,
offset=%u)\n", __func__, tlb_addr, offset);
+ return;
+ }
+
/*
* First, sync the memory before unmapping the entry
*/
```It might be useful to have CONFIG_SLUB_DEBUG=y, CONFIG_SLUB_DEBUG_ON=y and line numbers (scripts/decode_stacktrace.sh) too.
Thank you so much for helping!
Quoted 25 lines
Quoted 25 lines
Quoted 5 lines
It might also be worth taking the IOMMU out of the equation, since that interfaces differently with SWIOTLB and I couldn't figure out the code path from the log you provided. What happens if you boot with "amd_iommu=off swiotlb=force"?
Oh, now there's a thing... the chat from the IOMMU API in the boot log implies that the IOMMU *should* be in the picture - we see that default domains are
IOMMU_DOMAIN_DMAdefault and the GPU 0000:0c:00.0 was added to a group. That meansdev->dma_opsshould be set and DMA API calls should be going through iommu-dma, yet the callstack in the crash says we've gone straight fromdma_map_page_attrs()toswiotlb_map(), implying the inlinedma_direct_map_page()path.If
dev->dma_opsdidn't look right in the first place, it's perhaps less surprising thatdev->dma_io_tlb_memmight be wild as well. It doesn't seem plausible that we should have a race between initialising the device and probing its driver, so maybe the whole dev pointer is getting trampled earlier in the callchain (or is fundamentally wrong to begin with, but from a quick skim of the amdgpu code it did look likeadev->devandadev->pdevare appropriately set early on byamdgpu_pci_probe()).Quoted 2 lines
(although word of warning here: i915 dies horribly on my laptop if I pass swiotlb=force, even with the distro 5.10 kernel)
Quoted 7 lines
Quoted 2 lines
FWIW I'd imagine you probably need to massively increase the SWIOTLB buffer size to have hope of that working.
Is it worth trying this still then?
Cheers,
Nathan
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Hi Claire,
Quoted 61 lines · Claire Chang
Looking at the logs, the use-after-free bug looked somehow relevant (and it's nvme again. Qian's crash is about nvme too):
[ 2.468288] BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.468288] Read of size 8 at addr ffff8881d7830000 by task swapper/0/0[ 2.468288] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1 [ 2.468288] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 2.468288] Call Trace: [ 2.468288] <IRQ> [ 2.479433] dump_stack+0x9c/0xcf [ 2.479433] print_address_description.constprop.0+0x18/0x130 [ 2.479433] ? __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.479433] kasan_report.cold+0x7f/0x111 [ 2.479433] ? __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.479433] __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 2.479433] nvme_pci_complete_rq+0x73/0x130 [ 2.479433] blk_complete_reqs+0x6f/0x80 [ 2.479433] __do_softirq+0xfc/0x3be [ 2.479433] irq_exit_rcu+0xce/0x120 [ 2.479433] common_interrupt+0x80/0xa0 [ 2.479433] </IRQ> [ 2.479433] asm_common_interrupt+0x1e/0x40 [ 2.479433] RIP: 0010:cpuidle_enter_state+0xf9/0x590I wonder if this ended up unmapping something wrong and messing up the
dev->dma_io_tlb_mem(i.e.io_tlb_default_mem)?Could you try this patch on top of
7d31f1c65cc9? This patch helps check if we try to unmap the wrong address.```
kernel/dma/swiotlb.c +15
-0@@ -613,6 +613,21 @@ void swiotlb_tbl_unmap_single(struct device *dev,phys_addr_t tlb_addr, size_t mapping_size, enum dma_data_direction dir, unsigned long attrs) { + struct io_tlb_mem *mem = dev->dma_io_tlb_mem; +unsigned int offset =swiotlb_align_offset (dev, tlb_addr); +int index; + +if (!is_swiotlb_buffer (dev, tlb_addr - offset)) { + dev_err(dev, "%s: attempt to unmap invalid address (0x%llx, offset=%u)\n", __func__, tlb_addr, offset); + return; + } + + index = (tlb_addr - offset - mem->start) >> IO_TLB_SHIFT; +if (mem->slots[index].orig_addr ==INVALID_PHYS_ADDR ) { +dev_err (dev,"%s: memory is not mapped before (0x%llx, offset=%u)\n", __func__, tlb_addr, offset); +return ; + } +/* * First, sync the memory before unmapping the entry */
Quoted 5 lines
```
It might be useful to haveCONFIG_SLUB_DEBUG=y,CONFIG_SLUB_DEBUG_ON=yand line numbers (scripts/decode_stacktrace.sh) too.Thank you so much for helping!
Please find attached logs both decoded and not decoded, with CONFIG_KASAN=y + CONFIG_SLUB_DEBUG_ON=y with the requested patch applied on top of 7d31f1c65cc9.
If there is any further information I can provide, please let me know!
Cheers,
Nathan
[ 0.000000] Linux version 5.12.0-rc3-debug-00033-g167e3e00e2be (nathan@archlinux-ax161) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Mon Jul 5 10:52:15 MST 2021 [ 0.000000] Command line: initrd=\amd-ucode.img initrd=\initramfs-linux-debug.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c0ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009c10000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20d000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000b838ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b8a15000-0x00000000badfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000badff000-0x00000000bbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000081f380000-0x000000083fffffff] reserved [ 0.000000] intel_pstate: HWP disabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable [ 0.000000] e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009c0ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000009c10000-0x0000000009ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000000a20d000-0x000000000affffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000b4c66017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b4c66018-0x00000000b4c73457] usable [ 0.000000] reserve setup_data: [mem 0x00000000b4c73458-0x00000000b838ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000b8a15000-0x00000000badfefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000badff000-0x00000000bbffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bc000000-0x00000000bdffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000081f37ffff] usable [ 0.000000] reserve setup_data: [mem 0x000000081f380000-0x000000083fffffff] reserved [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI=0xb8721000 ACPI 2.0=0xb8721014 TPMFinalLog=0xb89c8000 SMBIOS=0xbac0f000 SMBIOS 3.0=0xbac0e000 MEMATTR=0xb5183018 ESRT=0xb6cf5018 RNG=0xbac3e998 TPMEventLog=0xb5184018 [ 0.000000] efi: seeding entropy pool [ 0.000000] SMBIOS 3.3.0 present. [ 0.000000] DMI: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3792.936 MHz processor [ 0.000280] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000287] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000309] last_pfn = 0x81f380 max_arch_pfn = 0x400000000 [ 0.000615] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001571] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.001586] last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.006163] esrt: Reserving ESRT space from 0x00000000b6cf5018 to 0x00000000b6cf5050. [ 0.006185] e820: update [mem 0xb6cf5000-0xb6cf5fff] usable ==> reserved [ 0.006628] check: Scanning 1 areas for low memory corruption [ 0.006637] Using GB pages for direct mapping [ 0.012545] Secure boot disabled [ 0.012547] RAMDISK: [mem 0x7f7c7000-0x7fff5fff] [ 0.012570] ACPI: Early table checksum verification disabled [ 0.012577] ACPI: RSDP 0x00000000B8721014 000024 (v02 HPQOEM) [ 0.012586] ACPI: XSDT 0x00000000B8720728 0000EC (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.012598] ACPI: FACP 0x00000000B870F000 000114 (v06 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012612] ACPI: DSDT 0x00000000B86FE000 01050C (v02 HPQOEM SLIC-CPC 01072009 INTL 20120913) [ 0.012622] ACPI: FACS 0x00000000B89F8000 000040 [ 0.012630] ACPI: MSDM 0x00000000B871F000 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.012638] ACPI: SSDT 0x00000000B871E000 000050 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012646] ACPI: IVRS 0x00000000B871D000 0000D0 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000000) [ 0.012654] ACPI: SSDT 0x00000000B8715000 007229 (v02 HPQOEM SLIC-CPC 00000002 MSFT 04000000) [ 0.012662] ACPI: SSDT 0x00000000B8711000 003BA1 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012670] ACPI: SSDT 0x00000000B8710000 000094 (v02 HPQOEM SLIC-CPC 01072009 AMI 01072009) [ 0.012678] ACPI: FIDT 0x00000000B86FD000 00009C (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012686] ACPI: MCFG 0x00000000B86FC000 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00010013) [ 0.012694] ACPI: HPET 0x00000000B86FB000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00000005) [ 0.012702] ACPI: VFCT 0x00000000B86ED000 00D484 (v01 HPQOEM SLIC-CPC 00000001 AMD 31504F47) [ 0.012710] ACPI: BGRT 0x00000000B86EC000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012718] ACPI: TPM2 0x00000000B86EB000 00004C (v04 HPQOEM SLIC-CPC 00000001 AMI 00000000) [ 0.012726] ACPI: SSDT 0x00000000B86E9000 001CE4 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000001) [ 0.012734] ACPI: CRAT 0x00000000B86E8000 0007E8 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) [ 0.012742] ACPI: CDIT 0x00000000B86E7000 000029 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) [ 0.012750] ACPI: SSDT 0x00000000B86E6000 000D37 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012758] ACPI: SSDT 0x00000000B86E4000 0010A5 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012765] ACPI: SSDT 0x00000000B86E0000 00333E (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012773] ACPI: SSDT 0x00000000B86DF000 0000BF (v01 HPQOEM SLIC-CPC 00001000 INTL 20120913) [ 0.012781] ACPI: WSMT 0x00000000B86DE000 000028 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012789] ACPI: APIC 0x00000000B86DD000 00015E (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012797] ACPI: SSDT 0x00000000B86DC000 000517 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012805] ACPI: SSDT 0x00000000B86DA000 0010AF (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012813] ACPI: FPDT 0x00000000B86D9000 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.012827] ACPI: Local APIC address 0xfee00000 [ 0.013152] No NUMA configuration found [ 0.013154] Faking a node at [mem 0x0000000000000000-0x000000081f37ffff] [ 0.013164] NODE_DATA(0) allocated [mem 0x81f37c000-0x81f37ffff] [ 0.013278] Zone ranges: [ 0.013280] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013284] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013288] Normal [mem 0x0000000100000000-0x000000081f37ffff] [ 0.013292] Device empty [ 0.013295] Movable zone start for each node [ 0.013297] Early memory node ranges [ 0.013298] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.013301] node 0: [mem 0x0000000000100000-0x0000000009c0ffff] [ 0.013304] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.013306] node 0: [mem 0x000000000a20d000-0x000000000affffff] [ 0.013309] node 0: [mem 0x000000000b020000-0x00000000b838ffff] [ 0.013312] node 0: [mem 0x00000000badff000-0x00000000bbffffff] [ 0.013314] node 0: [mem 0x0000000100000000-0x000000081f37ffff] [ 0.013322] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff] [ 0.013326] On node 0 totalpages: 8225939 [ 0.013329] DMA zone: 64 pages used for memmap [ 0.013331] DMA zone: 26 pages reserved [ 0.013334] DMA zone: 3999 pages, LIFO batch:0 [ 0.015777] DMA zone: 28769 pages in unavailable ranges [ 0.015779] DMA32 zone: 11782 pages used for memmap [ 0.015781] DMA32 zone: 754036 pages, LIFO batch:63 [ 0.059946] DMA32 zone: 28300 pages in unavailable ranges [ 0.059954] Normal zone: 116686 pages used for memmap [ 0.059956] Normal zone: 7467904 pages, LIFO batch:63 [ 0.477178] Normal zone: 3200 pages in unavailable ranges [ 0.918352] kasan: KernelAddressSanitizer initialized [ 0.918877] ACPI: PM-Timer IO Port: 0x808 [ 0.918881] ACPI: Local APIC address 0xfee00000 [ 0.918894] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.918911] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.918918] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.918923] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.918927] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.918931] ACPI: IRQ0 used by override. [ 0.918934] ACPI: IRQ9 used by override. [ 0.918939] Using ACPI (MADT) for SMP configuration information [ 0.918942] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.918969] e820: update [mem 0xb5158000-0xb517ffff] usable ==> reserved [ 0.919000] smpboot: Allowing 32 CPUs, 24 hotplug CPUs [ 0.919115] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.919122] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.919129] PM: hibernation: Registered nosave memory: [mem 0x09c10000-0x09ffffff] [ 0.919136] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff] [ 0.919143] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.919150] PM: hibernation: Registered nosave memory: [mem 0xb4c66000-0xb4c66fff] [ 0.919157] PM: hibernation: Registered nosave memory: [mem 0xb4c73000-0xb4c73fff] [ 0.919164] PM: hibernation: Registered nosave memory: [mem 0xb5158000-0xb517ffff] [ 0.919171] PM: hibernation: Registered nosave memory: [mem 0xb6cf5000-0xb6cf5fff] [ 0.919179] PM: hibernation: Registered nosave memory: [mem 0xb8390000-0xb86c5fff] [ 0.919181] PM: hibernation: Registered nosave memory: [mem 0xb86c6000-0xb8721fff] [ 0.919183] PM: hibernation: Registered nosave memory: [mem 0xb8722000-0xb8a14fff] [ 0.919186] PM: hibernation: Registered nosave memory: [mem 0xb8a15000-0xbadfefff] [ 0.919193] PM: hibernation: Registered nosave memory: [mem 0xbc000000-0xbdffffff] [ 0.919196] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbeffffff] [ 0.919198] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.919201] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff] [ 0.919203] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.919205] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff] [ 0.919208] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff] [ 0.919210] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff] [ 0.919213] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd6fffff] [ 0.919215] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff] [ 0.919217] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ 0.919220] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ 0.919222] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ 0.919225] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.919227] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.919229] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ 0.919232] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ 0.919234] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ 0.919237] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.919239] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.919241] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.919244] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.919246] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.919249] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] [ 0.919251] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] [ 0.919253] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] [ 0.919256] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] [ 0.919258] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff] [ 0.919261] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.919266] [mem 0xc0000000-0xefffffff] available for PCI devices [ 0.919270] Booting paravirtualized kernel on bare hardware [ 0.919274] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.927878] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1 [ 0.929637] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144 [ 0.929671] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152 [ 0.929677] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.929704] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.929806] Built 1 zonelists, mobility grouping on. Total pages: 8097381 [ 0.929809] Policy zone: Normal [ 0.929812] Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux-debug.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp [ 0.929899] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.929901] printk: log_buf_len total cpu_extra contributions: 126976 bytes [ 0.929903] printk: log_buf_len min size: 131072 bytes [ 0.930262] printk: log_buf_len: 262144 bytes [ 0.930264] printk: early log buf free: 114328(87%) [ 0.933977] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.935848] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.936118] mem auto-init: stack:off, heap alloc:on, heap free:off [ 1.642466] Memory: 27987960K/32903756K available (20488K kernel code, 7279K rwdata, 8472K rodata, 2012K init, 5244K bss, 4915540K reserved, 0K cma-reserved) [ 1.642480] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0 [ 1.643591] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 1.643651] ftrace: allocating 41986 entries in 165 pages [ 1.667334] ftrace: allocated 165 pages with 4 groups [ 1.668416] rcu: Preemptible hierarchical RCU implementation. [ 1.668418] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 1.668420] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32. [ 1.668422] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 1.668425] Trampoline variant of Tasks RCU enabled. [ 1.668427] Rude variant of Tasks RCU enabled. [ 1.668428] Tracing variant of Tasks RCU enabled. [ 1.668430] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 1.668432] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 1.700587] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16 [ 1.701467] Console: colour dummy device 80x25 [ 1.701534] printk: console [tty0] enabled [ 1.701628] ACPI: Core revision 20210105 [ 1.703688] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 1.703717] APIC: Switch to symmetric I/O mode setup [ 1.705705] Switched APIC routing to physical flat. [ 1.707227] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.723724] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d588d6a09c, max_idle_ns: 881590727049 ns [ 1.723739] Calibrating delay loop (skipped), value calculated using timer frequency.. 7588.95 BogoMIPS (lpj=12643120) [ 1.723745] pid_max: default: 32768 minimum: 301 [ 1.733354] LSM: Security Framework initializing [ 1.733395] Yama: becoming mindful. [ 1.733644] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.733718] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.735662] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 1.735762] LVT offset 1 assigned for vector 0xf9 [ 1.735819] LVT offset 2 assigned for vector 0xf4 [ 1.735836] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 1.735839] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 1.735845] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.735849] Spectre V2 : Mitigation: Full AMD retpoline [ 1.735851] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.735853] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.735855] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.735858] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 1.735860] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 1.736225] Freeing SMP alternatives memory: 32K [ 1.844242] smpboot: CPU0: AMD Ryzen 3 4300G with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1) [ 1.845243] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 1.845254] ... version: 0 [ 1.845256] ... bit width: 48 [ 1.845258] ... generic registers: 6 [ 1.845259] ... value mask: 0000ffffffffffff [ 1.845261] ... max period: 00007fffffffffff [ 1.845263] ... fixed-purpose events: 0 [ 1.845265] ... event mask: 000000000000003f [ 1.845496] rcu: Hierarchical SRCU implementation. [ 1.849560] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.852535] smp: Bringing up secondary CPUs ... [ 1.853409] x86: Booting SMP configuration: [ 1.853412] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 1.874254] smp: Brought up 1 node, 8 CPUs [ 1.874260] smpboot: Max logical packages: 4 [ 1.874262] smpboot: Total of 8 processors activated (60711.60 BogoMIPS) [ 1.882108] devtmpfs: initialized [ 1.882108] x86/mm: Memory block size: 128MB [ 1.931108] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes) [ 1.931108] PM: Registering ACPI NVS region [mem 0xb8722000-0xb8a14fff] (3092480 bytes) [ 1.935783] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 1.935824] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 1.936354] pinctrl core: initialized pinctrl subsystem [ 1.937662] PM: RTC time: 18:01:44, date: 2021-07-05 [ 1.938802] NET: Registered protocol family 16 [ 1.940659] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 1.941182] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.941702] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.941826] audit: initializing netlink subsys (disabled) [ 1.941904] audit: type=2000 audit(1625508104.233:1): state=initialized audit_enabled=0 res=1 [ 1.944097] thermal_sys: Registered thermal governor 'fair_share' [ 1.944100] thermal_sys: Registered thermal governor 'bang_bang' [ 1.944102] thermal_sys: Registered thermal governor 'step_wise' [ 1.944104] thermal_sys: Registered thermal governor 'user_space' [ 1.944106] thermal_sys: Registered thermal governor 'power_allocator' [ 1.944183] cpuidle: using governor ladder [ 1.944183] cpuidle: using governor menu [ 1.944183] ACPI: bus type PCI registered [ 1.944183] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.944828] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 1.944842] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 1.950889] PCI: Using configuration type 1 for base access [ 1.983636] Kprobes globally optimized [ 1.983989] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.983989] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.992155] ACPI: Added _OSI(Module Device) [ 1.992159] ACPI: Added _OSI(Processor Device) [ 1.992161] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.992163] ACPI: Added _OSI(Processor Aggregator Device) [ 1.992180] ACPI: Added _OSI(Linux-Dell-Video) [ 1.992194] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.992207] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 2.797646] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 2.847458] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 3.194961] ACPI: EC: EC started [ 3.194966] ACPI: EC: interrupt blocked [ 3.195008] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.195018] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 3.195024] ACPI: Interpreter enabled [ 3.195193] ACPI: (supports S0 S3 S4 S5) [ 3.195196] ACPI: Using IOAPIC for interrupt routing [ 3.200393] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.215236] ACPI: Enabled 4 GPEs in block 00 to 1F [ 3.580211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 3.580251] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 3.588446] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 3.596390] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 3.596579] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 3.610071] PCI host bridge to bus 0000:00 [ 3.610083] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 3.610096] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 3.610107] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 3.610118] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 3.610130] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.610141] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 3.610152] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window] [ 3.610163] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 3.610176] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.610333] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 [ 3.612614] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 [ 3.614862] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 [ 3.616444] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 [ 3.618052] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 [ 3.618078] pci 0000:00:02.1: enabling Extended Tags [ 3.618183] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold [ 3.622301] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 [ 3.622328] pci 0000:00:02.2: enabling Extended Tags [ 3.622432] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 3.625017] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 [ 3.626612] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 [ 3.626637] pci 0000:00:08.1: enabling Extended Tags [ 3.626737] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 3.629320] pci 0000:00:08.2: [1022:1635] type 01 class 0x060400 [ 3.629345] pci 0000:00:08.2: enabling Extended Tags [ 3.629445] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 3.632062] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 3.634325] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 3.636604] pci 0000:00:18.0: [1022:1448] type 00 class 0x060000 [ 3.638170] pci 0000:00:18.1: [1022:1449] type 00 class 0x060000 [ 3.639716] pci 0000:00:18.2: [1022:144a] type 00 class 0x060000 [ 3.641299] pci 0000:00:18.3: [1022:144b] type 00 class 0x060000 [ 3.642859] pci 0000:00:18.4: [1022:144c] type 00 class 0x060000 [ 3.644429] pci 0000:00:18.5: [1022:144d] type 00 class 0x060000 [ 3.645990] pci 0000:00:18.6: [1022:144e] type 00 class 0x060000 [ 3.647557] pci 0000:00:18.7: [1022:144f] type 00 class 0x060000 [ 3.650047] pci 0000:01:00.0: [1022:43d1] type 00 class 0x0c0330 [ 3.650068] pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit] [ 3.650111] pci 0000:01:00.0: enabling Extended Tags [ 3.650313] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 3.651859] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601 [ 3.651897] pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff] [ 3.651905] pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref] [ 3.651914] pci 0000:01:00.1: enabling Extended Tags [ 3.652099] pci 0000:01:00.1: PME# supported from D3hot D3cold [ 3.660042] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400 [ 3.660088] pci 0000:01:00.2: enabling Extended Tags [ 3.660269] pci 0000:01:00.2: PME# supported from D3hot D3cold [ 3.661760] pci 0000:00:02.1: PCI bridge to [bus 01-0a] [ 3.661766] pci 0000:00:02.1: bridge window [io 0xd000-0xefff] [ 3.661771] pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] [ 3.664265] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400 [ 3.664314] pci 0000:02:00.0: enabling Extended Tags [ 3.664573] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 3.666425] pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400 [ 3.666473] pci 0000:02:01.0: enabling Extended Tags [ 3.666735] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 3.668564] pci 0000:02:02.0: [1022:43c7] type 01 class 0x060400 [ 3.668612] pci 0000:02:02.0: enabling Extended Tags [ 3.668876] pci 0000:02:02.0: PME# supported from D3hot D3cold [ 3.670718] pci 0000:02:03.0: [1022:43c7] type 01 class 0x060400 [ 3.670766] pci 0000:02:03.0: enabling Extended Tags [ 3.671027] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 3.672863] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400 [ 3.672912] pci 0000:02:04.0: enabling Extended Tags [ 3.673170] pci 0000:02:04.0: PME# supported from D3hot D3cold [ 3.675020] pci 0000:02:05.0: [1022:43c7] type 01 class 0x060400 [ 3.675069] pci 0000:02:05.0: enabling Extended Tags [ 3.675331] pci 0000:02:05.0: PME# supported from D3hot D3cold [ 3.677201] pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400 [ 3.677249] pci 0000:02:06.0: enabling Extended Tags [ 3.677509] pci 0000:02:06.0: PME# supported from D3hot D3cold [ 3.679360] pci 0000:02:07.0: [1022:43c7] type 01 class 0x060400 [ 3.679408] pci 0000:02:07.0: enabling Extended Tags [ 3.679668] pci 0000:02:07.0: PME# supported from D3hot D3cold [ 3.681502] pci 0000:01:00.2: PCI bridge to [bus 02-0a] [ 3.681510] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 3.681516] pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 3.682091] pci 0000:02:00.0: PCI bridge to [bus 03] [ 3.682671] pci 0000:02:01.0: PCI bridge to [bus 04] [ 3.683240] pci 0000:02:02.0: PCI bridge to [bus 05] [ 3.683819] pci 0000:02:03.0: PCI bridge to [bus 06] [ 3.684392] pci 0000:02:04.0: PCI bridge to [bus 07] [ 3.684675] pci 0000:02:05.0: PCI bridge to [bus 08] [ 3.685027] pci 0000:09:00.0: [10ec:c821] type 00 class 0x028000 [ 3.685056] pci 0000:09:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 3.685091] pci 0000:09:00.0: reg 0x18: [mem 0xfcc00000-0xfcc0ffff 64bit] [ 3.685567] pci 0000:09:00.0: supports D1 D2 [ 3.685570] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.686427] pci 0000:02:06.0: PCI bridge to [bus 09] [ 3.686434] pci 0000:02:06.0: bridge window [io 0xe000-0xefff] [ 3.686439] pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 3.686767] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000 [ 3.686797] pci 0000:0a:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 3.686836] pci 0000:0a:00.0: reg 0x18: [mem 0xfcb04000-0xfcb04fff 64bit] [ 3.686862] pci 0000:0a:00.0: reg 0x20: [mem 0xfcb00000-0xfcb03fff 64bit] [ 3.687312] pci 0000:0a:00.0: supports D1 D2 [ 3.687314] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.688181] pci 0000:02:07.0: PCI bridge to [bus 0a] [ 3.688188] pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] [ 3.688193] pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 3.688810] pci 0000:0b:00.0: [1c5c:1339] type 00 class 0x010802 [ 3.688830] pci 0000:0b:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit] [ 3.689078] pci 0000:0b:00.0: supports D1 [ 3.689080] pci 0000:0b:00.0: PME# supported from D0 D1 D3hot [ 3.689157] pci 0000:0b:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:02.2 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 3.689819] pci 0000:00:02.2: PCI bridge to [bus 0b] [ 3.689825] pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 3.691693] pci 0000:0c:00.0: [1002:1636] type 00 class 0x030000 [ 3.691707] pci 0000:0c:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 3.691717] pci 0000:0c:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] [ 3.691725] pci 0000:0c:00.0: reg 0x20: [io 0xf000-0xf0ff] [ 3.691733] pci 0000:0c:00.0: reg 0x24: [mem 0xfca00000-0xfca7ffff] [ 3.691744] pci 0000:0c:00.0: enabling Extended Tags [ 3.691887] pci 0000:0c:00.0: BAR 0: assigned to efifb [ 3.691937] pci 0000:0c:00.0: PME# supported from D1 D2 D3hot D3cold [ 3.691975] pci 0000:0c:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 3.693671] pci 0000:0c:00.1: [1002:1637] type 00 class 0x040300 [ 3.693682] pci 0000:0c:00.1: reg 0x10: [mem 0xfca88000-0xfca8bfff] [ 3.693706] pci 0000:0c:00.1: enabling Extended Tags [ 3.693878] pci 0000:0c:00.1: PME# supported from D1 D2 D3hot D3cold [ 3.695558] pci 0000:0c:00.2: [1022:15df] type 00 class 0x108000 [ 3.695574] pci 0000:0c:00.2: reg 0x18: [mem 0xfc900000-0xfc9fffff] [ 3.695587] pci 0000:0c:00.2: reg 0x24: [mem 0xfca8c000-0xfca8dfff] [ 3.695596] pci 0000:0c:00.2: enabling Extended Tags [ 3.697366] pci 0000:0c:00.3: [1022:1639] type 00 class 0x0c0330 [ 3.697382] pci 0000:0c:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] [ 3.697409] pci 0000:0c:00.3: enabling Extended Tags [ 3.697581] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold [ 3.699262] pci 0000:0c:00.4: [1022:1639] type 00 class 0x0c0330 [ 3.699276] pci 0000:0c:00.4: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit] [ 3.699303] pci 0000:0c:00.4: enabling Extended Tags [ 3.699470] pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold [ 3.701157] pci 0000:0c:00.6: [1022:15e3] type 00 class 0x040300 [ 3.701168] pci 0000:0c:00.6: reg 0x10: [mem 0xfca80000-0xfca87fff] [ 3.701192] pci 0000:0c:00.6: enabling Extended Tags [ 3.701357] pci 0000:0c:00.6: PME# supported from D0 D3hot D3cold [ 3.703159] pci 0000:00:08.1: PCI bridge to [bus 0c] [ 3.703165] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 3.703169] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] [ 3.703175] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 3.703911] pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601 [ 3.703936] pci 0000:0d:00.0: reg 0x24: [mem 0xfce01000-0xfce017ff] [ 3.703946] pci 0000:0d:00.0: enabling Extended Tags [ 3.704154] pci 0000:0d:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 3.705404] pci 0000:0d:00.1: [1022:7901] type 00 class 0x010601 [ 3.705429] pci 0000:0d:00.1: reg 0x24: [mem 0xfce00000-0xfce007ff] [ 3.705439] pci 0000:0d:00.1: enabling Extended Tags [ 3.706926] pci 0000:00:08.2: PCI bridge to [bus 0d] [ 3.706933] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 3.719188] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 3.720993] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 3.722685] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 3.724579] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 3.726367] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 3.727890] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 3.729400] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 3.730923] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 3.748921] ACPI: EC: interrupt unblocked [ 3.748925] ACPI: EC: event unblocked [ 3.748931] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.748933] ACPI: EC: GPE=0x3 [ 3.748945] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 3.748962] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 3.749531] iommu: Default domain type: Translated [ 3.750467] pci 0000:0c:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 3.750470] pci 0000:0c:00.0: vgaarb: bridge control possible [ 3.750473] pci 0000:0c:00.0: vgaarb: setting as boot device [ 3.750476] vgaarb: loaded [ 3.753243] SCSI subsystem initialized [ 3.753883] libata version 3.00 loaded. [ 3.753932] ACPI: bus type USB registered [ 3.753977] usbcore: registered new interface driver usbfs [ 3.754032] usbcore: registered new interface driver hub [ 3.754119] usbcore: registered new device driver usb [ 3.754432] pps_core: LinuxPPS API ver. 1 registered [ 3.754434] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 3.754483] PTP clock support registered [ 3.754579] EDAC MC: Ver: 3.0.0 [ 3.755028] Registered efivars operations [ 3.758940] NetLabel: Initializing [ 3.758943] NetLabel: domain hash size = 128 [ 3.758945] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 3.759115] NetLabel: unlabeled traffic allowed by default [ 3.759150] PCI: Using ACPI for IRQ routing [ 3.763418] PCI: pci_cache_line_size set to 64 bytes [ 3.763519] e820: reserve RAM buffer [mem 0x09c10000-0x0bffffff] [ 3.763535] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 3.763547] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 3.763559] e820: reserve RAM buffer [mem 0xb4c66018-0xb7ffffff] [ 3.763572] e820: reserve RAM buffer [mem 0xb5158000-0xb7ffffff] [ 3.763584] e820: reserve RAM buffer [mem 0xb6cf5000-0xb7ffffff] [ 3.763596] e820: reserve RAM buffer [mem 0xb8390000-0xbbffffff] [ 3.763609] e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff] [ 3.763871] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 3.763879] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 3.767071] clocksource: Switched to clocksource tsc-early [ 3.947809] VFS: Disk quotas dquot_6.6.0 [ 3.947952] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.949538] pnp: PnP ACPI init [ 3.952235] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 3.952300] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 3.954888] system 00:01: [mem 0x820000000-0x83fffffff window] has been reserved [ 3.954948] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.959738] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.977677] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 3.977699] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 3.977720] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 3.977743] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 3.977763] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 3.977783] system 00:03: [io 0x0a50-0x0a5f] has been reserved [ 3.977803] system 00:03: [io 0x0a60-0x0a6f] has been reserved [ 3.977823] system 00:03: [io 0x0a70-0x0a7f] has been reserved [ 3.977843] system 00:03: [io 0x0a80-0x0a8f] has been reserved [ 3.977863] system 00:03: [io 0x0a90-0x0b8e] has been reserved [ 3.977884] system 00:03: [io 0x0aa0-0x0aaf] has been reserved [ 3.977904] system 00:03: [io 0x0ab0-0x0abf] has been reserved [ 3.977924] system 00:03: [io 0x0ac0-0x0acf] has been reserved [ 3.977944] system 00:03: [io 0x0ad0-0x0adf] has been reserved [ 3.977979] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.985055] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 3.985077] system 00:04: [io 0x040b] has been reserved [ 3.985097] system 00:04: [io 0x04d6] has been reserved [ 3.985117] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 3.985137] system 00:04: [io 0x0c14] has been reserved [ 3.985157] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 3.985177] system 00:04: [io 0x0c52] has been reserved [ 3.985198] system 00:04: [io 0x0c6c] has been reserved [ 3.985221] system 00:04: [io 0x0c6f] has been reserved [ 3.985241] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 3.985261] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 3.985281] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 3.985302] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 3.985327] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 3.985347] system 00:04: [io 0x0800-0x089f] has been reserved [ 3.985367] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 3.985388] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 3.985408] system 00:04: [io 0x0900-0x090f] has been reserved [ 3.985428] system 00:04: [io 0x0910-0x091f] has been reserved [ 3.985460] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 3.985491] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 3.985513] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 3.985536] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 3.985566] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 3.985588] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 3.985611] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 3.985645] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.000921] pnp: PnP ACPI: found 5 devices [ 4.022230] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 4.022930] NET: Registered protocol family 2 [ 4.025189] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 4.025717] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 4.027463] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 4.027836] TCP: Hash tables configured (established 262144 bind 65536) [ 4.028821] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 4.029224] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 4.029555] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 4.030765] NET: Registered protocol family 1 [ 4.030807] NET: Registered protocol family 44 [ 4.030838] pci 0000:02:00.0: PCI bridge to [bus 03] [ 4.030860] pci 0000:02:01.0: PCI bridge to [bus 04] [ 4.030873] pci 0000:02:02.0: PCI bridge to [bus 05] [ 4.030885] pci 0000:02:03.0: PCI bridge to [bus 06] [ 4.030898] pci 0000:02:04.0: PCI bridge to [bus 07] [ 4.030910] pci 0000:02:05.0: PCI bridge to [bus 08] [ 4.030922] pci 0000:02:06.0: PCI bridge to [bus 09] [ 4.030927] pci 0000:02:06.0: bridge window [io 0xe000-0xefff] [ 4.030933] pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 4.030944] pci 0000:02:07.0: PCI bridge to [bus 0a] [ 4.030947] pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] [ 4.030953] pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 4.030963] pci 0000:01:00.2: PCI bridge to [bus 02-0a] [ 4.030967] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 4.030973] pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 4.030982] pci 0000:00:02.1: PCI bridge to [bus 01-0a] [ 4.030985] pci 0000:00:02.1: bridge window [io 0xd000-0xefff] [ 4.030990] pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] [ 4.030997] pci 0000:00:02.2: PCI bridge to [bus 0b] [ 4.031001] pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 4.031010] pci 0000:00:08.1: PCI bridge to [bus 0c] [ 4.031014] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 4.031018] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] [ 4.031022] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 4.031029] pci 0000:00:08.2: PCI bridge to [bus 0d] [ 4.031033] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 4.031043] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 4.031047] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 4.031050] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 4.031053] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 4.031057] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 4.031060] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 4.031064] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window] [ 4.031067] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 4.031071] pci_bus 0000:01: resource 0 [io 0xd000-0xefff] [ 4.031074] pci_bus 0000:01: resource 1 [mem 0xfcb00000-0xfcdfffff] [ 4.031078] pci_bus 0000:02: resource 0 [io 0xd000-0xefff] [ 4.031081] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfccfffff] [ 4.031085] pci_bus 0000:09: resource 0 [io 0xe000-0xefff] [ 4.031088] pci_bus 0000:09: resource 1 [mem 0xfcc00000-0xfccfffff] [ 4.031092] pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff] [ 4.031095] pci_bus 0000:0a: resource 1 [mem 0xfcb00000-0xfcbfffff] [ 4.031098] pci_bus 0000:0b: resource 1 [mem 0xfcf00000-0xfcffffff] [ 4.031102] pci_bus 0000:0c: resource 0 [io 0xf000-0xffff] [ 4.031105] pci_bus 0000:0c: resource 1 [mem 0xfc700000-0xfcafffff] [ 4.031108] pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 4.031112] pci_bus 0000:0d: resource 1 [mem 0xfce00000-0xfcefffff] [ 4.035088] pci 0000:0c:00.1: D0 power state depends on 0000:0c:00.0 [ 4.039436] PCI: CLS 64 bytes, default 64 [ 4.039874] Trying to unpack rootfs image as initramfs... [ 4.303879] Freeing initrd memory: 8380K [ 4.437100] pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter. [ 4.437124] fbcon: Taking over console [ 4.438778] pci 0000:00:00.2: can't derive routing for PCI INT A [ 4.438783] pci 0000:00:00.2: PCI INT A: not connected [ 4.439066] pci 0000:00:01.0: Adding to iommu group 0 [ 4.439254] pci 0000:00:02.0: Adding to iommu group 1 [ 4.439416] pci 0000:00:02.1: Adding to iommu group 2 [ 4.439576] pci 0000:00:02.2: Adding to iommu group 3 [ 4.439749] pci 0000:00:08.0: Adding to iommu group 4 [ 4.439838] pci 0000:00:08.1: Adding to iommu group 4 [ 4.439927] pci 0000:00:08.2: Adding to iommu group 4 [ 4.440092] pci 0000:00:14.0: Adding to iommu group 5 [ 4.440181] pci 0000:00:14.3: Adding to iommu group 5 [ 4.440425] pci 0000:00:18.0: Adding to iommu group 6 [ 4.440520] pci 0000:00:18.1: Adding to iommu group 6 [ 4.440619] pci 0000:00:18.2: Adding to iommu group 6 [ 4.440708] pci 0000:00:18.3: Adding to iommu group 6 [ 4.440798] pci 0000:00:18.4: Adding to iommu group 6 [ 4.440887] pci 0000:00:18.5: Adding to iommu group 6 [ 4.440976] pci 0000:00:18.6: Adding to iommu group 6 [ 4.441068] pci 0000:00:18.7: Adding to iommu group 6 [ 4.441251] pci 0000:01:00.0: Adding to iommu group 7 [ 4.441342] pci 0000:01:00.1: Adding to iommu group 7 [ 4.441433] pci 0000:01:00.2: Adding to iommu group 7 [ 4.441513] pci 0000:02:00.0: Adding to iommu group 7 [ 4.441591] pci 0000:02:01.0: Adding to iommu group 7 [ 4.441668] pci 0000:02:02.0: Adding to iommu group 7 [ 4.441752] pci 0000:02:03.0: Adding to iommu group 7 [ 4.441842] pci 0000:02:04.0: Adding to iommu group 7 [ 4.441919] pci 0000:02:05.0: Adding to iommu group 7 [ 4.442006] pci 0000:02:06.0: Adding to iommu group 7 [ 4.442089] pci 0000:02:07.0: Adding to iommu group 7 [ 4.442167] pci 0000:09:00.0: Adding to iommu group 7 [ 4.442254] pci 0000:0a:00.0: Adding to iommu group 7 [ 4.442401] pci 0000:0b:00.0: Adding to iommu group 8 [ 4.442495] pci 0000:0c:00.0: Adding to iommu group 4 [ 4.442579] pci 0000:0c:00.1: Adding to iommu group 4 [ 4.442657] pci 0000:0c:00.2: Adding to iommu group 4 [ 4.442736] pci 0000:0c:00.3: Adding to iommu group 4 [ 4.442815] pci 0000:0c:00.4: Adding to iommu group 4 [ 4.442901] pci 0000:0c:00.6: Adding to iommu group 4 [ 4.442980] pci 0000:0d:00.0: Adding to iommu group 4 [ 4.443062] pci 0000:0d:00.1: Adding to iommu group 4 [ 4.485919] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 4.485927] pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade): [ 4.485930] PPR X2APIC NX GT IA GA PC GA_vAPIC [ 4.485941] AMD-Vi: Interrupt remapping enabled [ 4.485943] AMD-Vi: Virtual APIC enabled [ 4.485944] AMD-Vi: X2APIC enabled [ 4.486507] AMD-Vi: Lazy IO/TLB flushing enabled [ 4.486638] amd_uncore: 4 amd_df counters detected [ 4.486658] amd_uncore: 6 amd_l3 counters detected [ 4.487370] LVT offset 0 assigned for vector 0x400 [ 4.487665] perf: AMD IBS detected (0x000003ff) [ 4.493516] check: Scanning for low memory corruption every 60 seconds [ 4.501303] Initialise system trusted keyrings [ 4.501370] Key type blacklist registered [ 4.501686] workingset: timestamp_bits=41 max_order=23 bucket_order=0 [ 4.535407] zbud: loaded [ 4.543286] Key type asymmetric registered [ 4.543290] Asymmetric key parser 'x509' registered [ 4.543383] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 4.543676] io scheduler mq-deadline registered [ 4.543680] io scheduler kyber registered [ 4.544306] io scheduler bfq registered [ 4.548330] pcieport 0000:00:02.1: PME: Signaling with IRQ 26 [ 4.549376] pcieport 0000:00:02.2: PME: Signaling with IRQ 27 [ 4.550413] pcieport 0000:00:08.1: PME: Signaling with IRQ 28 [ 4.552624] pcieport 0000:00:08.2: PME: Signaling with IRQ 29 [ 4.566880] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.567202] efifb: probing for efifb [ 4.567582] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k [ 4.567585] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 4.567588] efifb: scrolling: redraw [ 4.567589] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 4.568816] Console: switching to colour frame buffer device 128x48 [ 4.573826] fb0: EFI VGA frame buffer device [ 4.574618] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 4.575001] ACPI: button: Power Button [PWRB] [ 4.575507] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 4.577445] ACPI: button: Power Button [PWRF] [ 4.578214] Monitor-Mwait will be used to enter C-1 state [ 4.578264] ACPI: \_PR_.C000: Found 3 idle states [ 4.579833] ACPI: \_PR_.C002: Found 3 idle states [ 4.581513] ACPI: \_PR_.C004: Found 3 idle states [ 4.583007] ACPI: \_PR_.C006: Found 3 idle states [ 4.584708] ACPI: \_PR_.C001: Found 3 idle states [ 4.586254] ACPI: \_PR_.C003: Found 3 idle states [ 4.587838] ACPI: \_PR_.C005: Found 3 idle states [ 4.589535] ACPI: \_PR_.C007: Found 3 idle states [ 4.606622] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.606629] ACPI: thermal: Thermal Zone [HPTZ] (30 C) [ 4.608252] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.632735] Non-volatile memory driver v1.3 [ 4.632741] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]> [ 4.645325] nvme nvme0: pci function 0000:0b:00.0 [ 4.645645] ahci 0000:01:00.1: version 3.0 [ 4.645660] ahci 0000:01:00.1: enabling device (0100 -> 0102) [ 4.647511] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 4.647582] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 4.647587] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 4.651792] ================================================================== [ 4.651913] BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 4.652031] Read of size 8 at addr ffff8887c008f000 by task swapper/0/0
[ 4.652162] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug-00033-g167e3e00e2be #1 [ 4.652168] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 4.652172] Call Trace: [ 4.652176] <IRQ> [ 4.652180] dump_stack+0x9c/0xcf [ 4.652189] print_address_description.constprop.0+0x18/0x130 [ 4.652196] ? __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 4.652202] kasan_report.cold+0x7f/0x111 [ 4.652211] ? __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 4.652217] __iommu_dma_unmap_swiotlb+0x64/0xb0 [ 4.652224] nvme_pci_complete_rq+0x73/0x130 [ 4.652232] blk_complete_reqs+0x6f/0x80 [ 4.652239] __do_softirq+0xfc/0x3be [ 4.652247] irq_exit_rcu+0xce/0x120 [ 4.652254] common_interrupt+0x80/0xa0 [ 4.652261] </IRQ> [ 4.652264] asm_common_interrupt+0x1e/0x40 [ 4.652270] RIP: 0010:cpuidle_enter_state+0xf9/0x590 [ 4.652277] Code: 3d 14 09 b7 51 e8 57 a6 49 ff 49 89 c5 0f 1f 44 00 00 31 ff e8 18 bb 49 ff 80 3c 24 00 0f 85 aa 02 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 39 02 00 00 49 63 ee 48 8d 44 6d 00 48 8d 44 85 00 [ 4.652283] RSP: 0018:ffffffffaf807df0 EFLAGS: 00000246 [ 4.652289] RAX: 0000000000000000 RBX: ffff88810bd09000 RCX: ffffffffad944885 [ 4.652293] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8887c3235648 [ 4.652297] RBP: 0000000000000003 R08: 0000000000000001 R09: ffff8887c32356d7 [ 4.652300] R10: ffffed10f8646ada R11: 0000000000000001 R12: ffffffffafc5bfc0 [ 4.652304] R13: 0000000115446cbb R14: 0000000000000003 R15: ffffffffafc5c150 [ 4.652309] ? sched_idle_set_state+0x25/0x30 [ 4.652317] ? tick_nohz_idle_stop_tick+0x217/0x420 [ 4.652325] cpuidle_enter+0x3c/0x60 [ 4.652331] do_idle+0x2fa/0x3c0 [ 4.652338] ? arch_cpu_idle_exit+0x40/0x40 [ 4.652345] cpu_startup_entry+0x19/0x20 [ 4.652350] start_kernel+0x3a9/0x3c7 [ 4.652359] secondary_startup_64_no_verify+0xc2/0xcb
[ 4.652395] The buggy address belongs to the page: [ 4.652456] page:00000000a3938bc3 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7c008f [ 4.652461] flags: 0x2ffff0000000000() [ 4.652466] raw: 02ffff0000000000 ffffea001f0023c8 ffffea001f0023c8 0000000000000000 [ 4.652470] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 4.652472] page dumped because: kasan: bad access detected
[ 4.652491] Memory state around the buggy address: [ 4.652547] ffff8887c008ef00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652621] ffff8887c008ef80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652695] >ffff8887c008f000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652768] ^ [ 4.652803] ffff8887c008f080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652877] ffff8887c008f100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652950] ================================================================== [ 4.653029] Disabling lock debugging due to kernel taint [ 4.653309] nvme nvme0: missing or invalid SUBNQN field. [ 4.663105] nvme nvme0: 16/0/0 default/read/poll queues [ 4.668311] scsi host0: ahci [ 4.669899] nvme0n1: p1 p2 [ 4.670702] scsi host1: ahci [ 4.672616] scsi host2: ahci [ 4.674521] scsi host3: ahci [ 4.676781] scsi host4: ahci [ 4.678791] scsi host5: ahci [ 4.680663] scsi host6: ahci [ 4.682714] scsi host7: ahci [ 4.683697] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 44 [ 4.683702] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 44 [ 4.683707] ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 44 [ 4.683710] ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 44 [ 4.683714] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 44 [ 4.683718] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 44 [ 4.683722] ata7: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80400 irq 44 [ 4.683726] ata8: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80480 irq 44 [ 4.684113] ahci 0000:0d:00.0: enabling device (0100 -> 0102) [ 4.686333] ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 4.686342] ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 4.688739] scsi host8: ahci [ 4.689732] ata9: SATA max UDMA/133 abar m2048@0xfce01000 port 0xfce01100 irq 62 [ 4.689877] ahci 0000:0d:00.1: enabling device (0100 -> 0102) [ 4.691535] ahci 0000:0d:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 4.691544] ahci 0000:0d:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 4.694012] scsi host9: ahci [ 4.695026] ata10: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 64 [ 4.695247] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.695279] ehci-pci: EHCI PCI platform driver [ 4.695395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.695415] ohci-pci: OHCI PCI platform driver [ 4.695512] uhci_hcd: USB Universal Host Controller Interface driver [ 4.696210] usbcore: registered new interface driver usbserial_generic [ 4.696264] usbserial: USB Serial support registered for generic [ 4.697317] rtc_cmos 00:02: RTC can wake from S4 [ 4.699142] rtc_cmos 00:02: registered as rtc0 [ 4.699426] rtc_cmos 00:02: setting system clock to 2021-07-05T18:01:47 UTC (1625508107) [ 4.699656] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.700290] ledtrig-cpu: registered to indicate activity on CPUs [ 4.705912] hid: raw HID events driver (C) Jiri Kosina [ 4.706429] drop_monitor: Initializing network drop monitor service [ 4.706594] Initializing XFRM netlink socket [ 4.708814] NET: Registered protocol family 10 [ 4.733033] Segment Routing with IPv6 [ 4.733041] RPL Segment Routing with IPv6 [ 4.733175] NET: Registered protocol family 17 [ 4.744516] microcode: CPU0: patch_level=0x08600106 [ 4.744563] microcode: CPU1: patch_level=0x08600106 [ 4.744657] microcode: CPU2: patch_level=0x08600106 [ 4.744739] microcode: CPU3: patch_level=0x08600106 [ 4.744804] microcode: CPU4: patch_level=0x08600106 [ 4.744848] microcode: CPU5: patch_level=0x08600106 [ 4.744916] microcode: CPU6: patch_level=0x08600106 [ 4.744975] microcode: CPU7: patch_level=0x08600106 [ 4.745002] microcode: Microcode Update Driver: v2.2. [ 4.745820] resctrl: L3 allocation detected [ 4.745827] resctrl: L3DATA allocation detected [ 4.745829] resctrl: L3CODE allocation detected [ 4.745830] resctrl: MB allocation detected [ 4.745832] resctrl: L3 monitoring detected [ 4.745838] IPI shorthand broadcast: enabled [ 4.745984] sched_clock: Marking stable (4739676488, 6007714)->(4747676129, -1991927) [ 4.746812] registered taskstats version 1 [ 4.746922] Loading compiled-in X.509 certificates [ 4.757340] Loaded X.509 cert 'Build time autogenerated kernel key: 32cf4ae6b69274291395e11399683edef2a4e147' [ 4.762638] zswap: loaded using pool lz4/z3fold [ 4.764606] Key type ._fscrypt registered [ 4.764612] Key type .fscrypt registered [ 4.764614] Key type fscrypt-provisioning registered [ 4.776597] PM: Magic number: 13:252:38 [ 4.776765] memory memory207: hash matches [ 4.776798] memory memory74: hash matches [ 4.778951] RAS: Correctable Errors collector initialized. [ 4.995881] ata1: SATA link down (SStatus 0 SControl 300) [ 5.000972] ata9: SATA link down (SStatus 0 SControl 300) [ 5.005458] ata10: SATA link down (SStatus 0 SControl 300) [ 5.310074] ata2: SATA link down (SStatus 0 SControl 300) [ 5.490688] tsc: Refined TSC clocksource calibration: 3819.727 MHz [ 5.490713] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6e1e4508946, max_idle_ns: 881590469268 ns [ 5.490821] clocksource: Switched to clocksource tsc [ 5.622021] ata3: SATA link down (SStatus 0 SControl 300) [ 5.932590] ata4: SATA link down (SStatus 0 SControl 300) [ 6.245698] ata5: SATA link down (SStatus 0 SControl 300) [ 6.559773] ata6: SATA link down (SStatus 0 SControl 300) [ 6.872755] ata7: SATA link down (SStatus 0 SControl 300) [ 7.185687] ata8: SATA link down (SStatus 0 SControl 300) [ 7.200470] Freeing unused decrypted memory: 2036K [ 7.201233] Freeing unused kernel image (initmem) memory: 2012K [ 7.201243] Write protecting the kernel read-only data: 32768k [ 7.202524] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 7.203212] Freeing unused kernel image (rodata/data gap) memory: 1768K [ 7.261659] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 7.261671] rodata_test: all tests were successful [ 7.261705] Run /init as init process [ 7.261708] with arguments: [ 7.261710] /init [ 7.261712] with environment: [ 7.261714] HOME=/ [ 7.261716] TERM=linux [ 8.072610] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 8.072718] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 8.128723] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 8.136551] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 8.136562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.136567] usb usb1: Product: xHCI Host Controller [ 8.136572] usb usb1: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.136576] usb usb1: SerialNumber: 0000:01:00.0 [ 8.139731] hub 1-0:1.0: USB hub found [ 8.139944] hub 1-0:1.0: 14 ports detected [ 8.155361] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 8.155411] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 8.155437] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 8.155750] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.156512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 [ 8.156521] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.156525] usb usb2: Product: xHCI Host Controller [ 8.156528] usb usb2: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.156530] usb usb2: SerialNumber: 0000:01:00.0 [ 8.158456] hub 2-0:1.0: USB hub found [ 8.158657] hub 2-0:1.0: 8 ports detected [ 8.171454] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 8.171543] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 [ 8.172082] xhci_hcd 0000:0c:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 [ 8.178578] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 8.178589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.178594] usb usb3: Product: xHCI Host Controller [ 8.178598] usb usb3: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.178602] usb usb3: SerialNumber: 0000:0c:00.3 [ 8.181189] hub 3-0:1.0: USB hub found [ 8.181388] hub 3-0:1.0: 4 ports detected [ 8.185965] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 8.186032] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 [ 8.186059] xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 8.186366] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.187099] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 [ 8.187108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.187113] usb usb4: Product: xHCI Host Controller [ 8.187117] usb usb4: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.187122] usb usb4: SerialNumber: 0000:0c:00.3 [ 8.189404] hub 4-0:1.0: USB hub found [ 8.189539] hub 4-0:1.0: 2 ports detected [ 8.192958] xhci_hcd 0000:0c:00.4: xHCI Host Controller [ 8.193016] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 5 [ 8.193395] xhci_hcd 0000:0c:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 [ 8.197879] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 8.197887] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.197890] usb usb5: Product: xHCI Host Controller [ 8.197893] usb usb5: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.197895] usb usb5: SerialNumber: 0000:0c:00.4 [ 8.199515] hub 5-0:1.0: USB hub found [ 8.199659] hub 5-0:1.0: 4 ports detected [ 8.202842] xhci_hcd 0000:0c:00.4: xHCI Host Controller [ 8.202887] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 6 [ 8.202913] xhci_hcd 0000:0c:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 8.203133] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.203610] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 [ 8.203614] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.203618] usb usb6: Product: xHCI Host Controller [ 8.203620] usb usb6: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.203623] usb usb6: SerialNumber: 0000:0c:00.4 [ 8.205252] hub 6-0:1.0: USB hub found [ 8.205385] hub 6-0:1.0: 2 ports detected [ 8.483770] usb 1-11: new full-speed USB device number 2 using xhci_hcd [ 8.616313] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled [ 8.629895] XFS (nvme0n1p2): Mounting V5 Filesystem [ 8.640814] XFS (nvme0n1p2): Ending clean mount [ 8.643784] xfs filesystem being mounted at /new_root supports timestamps until 2038 (0x7fffffff) [ 8.701705] random: fast init done [ 8.850769] random: crng init done [ 8.850799] systemd[1]: Successfully credited entropy passed from boot loader. [ 8.854073] systemd[1]: systemd 248.3-2-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 8.870978] systemd[1]: Detected architecture x86-64. [ 8.874172] systemd[1]: Hostname set to <hp-4300G>. [ 8.883148] usb 1-11: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 8.883160] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.883165] usb 1-11: Product: USB Receiver [ 8.883169] usb 1-11: Manufacturer: Logitech [ 8.964795] systemd-fstab-generator[252]: Mount point is not a valid path, ignoring. [ 8.965686] systemd-fstab-generator[252]: Mount point is not a valid path, ignoring. [ 9.023787] usb 1-12: new full-speed USB device number 3 using xhci_hcd [ 9.133143] systemd[1]: Queued start job for default target Graphical Interface. [ 9.141522] systemd[1]: Created slice system-getty.slice. [ 9.143519] systemd[1]: Created slice system-modprobe.slice. [ 9.148031] systemd[1]: Created slice User and Session Slice. [ 9.148561] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.149038] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.150164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.150701] systemd[1]: Reached target Local Encrypted Volumes. [ 9.150901] systemd[1]: Reached target Login Prompts. [ 9.151100] systemd[1]: Reached target Paths. [ 9.151278] systemd[1]: Reached target Remote File Systems. [ 9.151475] systemd[1]: Reached target Slices. [ 9.151661] systemd[1]: Reached target Swap. [ 9.151839] systemd[1]: Reached target Local Verity Integrity Protected Volumes. [ 9.153881] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 9.157470] systemd[1]: Listening on Process Core Dump Socket. [ 9.159900] systemd[1]: Listening on Journal Audit Socket. [ 9.162031] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.164219] systemd[1]: Listening on Journal Socket. [ 9.166260] systemd[1]: Listening on Network Service Netlink Socket. [ 9.169746] systemd[1]: Listening on udev Control Socket. [ 9.171892] systemd[1]: Listening on udev Kernel Socket. [ 9.178783] systemd[1]: Mounting Huge Pages File System... [ 9.186001] systemd[1]: Mounting POSIX Message Queue File System... [ 9.192864] systemd[1]: Mounting Kernel Debug File System... [ 9.199803] systemd[1]: Mounting Kernel Trace File System... [ 9.207150] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 9.220054] systemd[1]: Starting Load Kernel Module configfs... [ 9.227187] systemd[1]: Starting Load Kernel Module drm... [ 9.234146] systemd[1]: Starting Load Kernel Module fuse... [ 9.240238] Linux agpgart interface v0.103 [ 9.242093] systemd[1]: Starting Set Up Additional Binary Formats... [ 9.243933] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 9.258253] fuse: init (API version 7.33) [ 9.258750] systemd[1]: Starting Journal Service... [ 9.269031] systemd[1]: Starting Load Kernel Modules... [ 9.275818] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.278268] systemd[1]: Condition check resulted in Repartition Root Disk being skipped. [ 9.285440] systemd[1]: Starting Coldplug All udev Devices... [ 9.289436] Asymmetric key parser 'pkcs8' registered [ 9.295407] systemd[1]: Mounted Huge Pages File System. [ 9.297675] systemd[1]: Mounted POSIX Message Queue File System. [ 9.299077] XFS: attr2 mount option is deprecated. [ 9.299875] systemd[1]: Mounted Kernel Debug File System. [ 9.302121] systemd[1]: Mounted Kernel Trace File System. [ 9.302305] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 9.307207] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 9.309211] audit: type=1130 audit(1625508112.104:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.310701] systemd[1]: [email protected]: Deactivated successfully. [ 9.312189] systemd[1]: Finished Load Kernel Module configfs. [ 9.314011] audit: type=1130 audit(1625508112.111:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.314063] audit: type=1131 audit(1625508112.111:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.315399] systemd[1]: [email protected]: Deactivated successfully. [ 9.316866] systemd[1]: Finished Load Kernel Module drm. [ 9.319018] audit: type=1130 audit(1625508112.114:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.319063] audit: type=1131 audit(1625508112.114:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.320369] systemd[1]: [email protected]: Deactivated successfully. [ 9.322053] systemd[1]: Finished Load Kernel Module fuse. [ 9.323928] audit: type=1130 audit(1625508112.121:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.323969] audit: type=1131 audit(1625508112.121:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.325885] systemd[1]: Finished Load Kernel Modules. [ 9.327726] audit: type=1130 audit(1625508112.124:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.329640] systemd[1]: Finished Remount Root and Kernel File Systems. [ 9.331465] audit: type=1130 audit(1625508112.128:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.331966] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 268 (systemd-binfmt) [ 9.334658] usb 1-12: New USB device found, idVendor=0bda, idProduct=b00a, bcdDevice= 1.10 [ 9.334669] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.334673] usb 1-12: Product: Bluetooth Radio [ 9.334677] usb 1-12: Manufacturer: Realtek [ 9.334681] usb 1-12: SerialNumber: 00e04c000001 [ 9.337615] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 9.345171] systemd[1]: Mounting FUSE Control File System... [ 9.352671] systemd[1]: Mounting Kernel Configuration File System... [ 9.354660] systemd[1]: Condition check resulted in First Boot Wizard being skipped. [ 9.356762] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 9.362335] systemd[1]: Starting Load/Save Random Seed... [ 9.370337] systemd[1]: Starting Apply Kernel Variables... [ 9.377555] systemd[1]: Starting Create System Users... [ 9.384837] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 9.388928] systemd[1]: Mounted FUSE Control File System. [ 9.391926] systemd[1]: Mounted Kernel Configuration File System. [ 9.396765] systemd[1]: Finished Load/Save Random Seed. [ 9.400536] audit: type=1130 audit(1625508112.194:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.407538] systemd[1]: Finished Apply Kernel Variables. [ 9.411712] systemd[1]: Finished Set Up Additional Binary Formats. [ 9.416339] systemd[1]: Finished Create System Users. [ 9.418688] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 9.424186] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.480449] systemd[1]: Finished Create Static Device Nodes in /dev. [ 9.482506] systemd[1]: Reached target Local File Systems (Pre). [ 9.489210] systemd[1]: Mounting /tmp... [ 9.491124] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped. [ 9.503225] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 9.508551] systemd[1]: Mounted /tmp. [ 9.573272] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 9.588922] systemd[1]: Starting Network Service... [ 9.638950] systemd[1]: Started Journal Service. [ 9.664886] systemd-journald[269]: Received client request to flush runtime journal. [ 9.759611] Bluetooth: Core ver 2.22 [ 9.759775] NET: Registered protocol family 31 [ 9.759778] Bluetooth: HCI device and connection manager initialized [ 9.759794] Bluetooth: HCI socket layer initialized [ 9.759807] Bluetooth: L2CAP socket layer initialized [ 9.759838] Bluetooth: SCO socket layer initialized [ 9.784432] usbcore: registered new interface driver btusb [ 9.786588] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821 [ 9.789596] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 9.789666] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin [ 9.793321] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin [ 9.794035] Bluetooth: hci0: RTL: cfg_sz 10, total sz 31990 [ 10.052152] acpi_cpufreq: overriding BIOS provided _PSD data [ 10.063914] acpi-tad ACPI000E:00: Missing _PRW [ 10.241179] ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 10.264286] acpi device:1e: registered as cooling_device8 [ 10.269015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input2 [ 10.319302] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 10.358026] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 10.358037] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 10.358941] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 10.362274] ccp 0000:0c:00.2: enabling device (0100 -> 0102) [ 10.364925] ccp 0000:0c:00.2: ccp: unable to access the device: you might be running a broken BIOS. [ 10.375365] ccp 0000:0c:00.2: tee enabled [ 10.375376] ccp 0000:0c:00.2: psp enabled [ 10.394306] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 10.395169] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 10.396264] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 10.471471] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 10.500876] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 10.500885] RAPL PMU: hw unit of domain package 2^-16 Joules [ 10.533106] cryptd: max_cpu_qlen set to 1000 [ 10.572803] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.0/0003:046D:C534.0001/input/input4 [ 10.601442] libphy: r8169: probed [ 10.603871] r8169 0000:0a:00.0 eth0: RTL8168h/8111h, 00:68:eb:ad:98:43, XID 541, IRQ 91 [ 10.603884] r8169 0000:0a:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 10.618131] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.632919] AVX2 version of gcm_enc/dec engaged. [ 10.633000] AES CTR mode by8 optimization enabled [ 10.633757] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 [ 10.642569] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.643042] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 10.643062] cfg80211: failed to load regulatory.db [ 10.676986] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input5 [ 10.680342] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input6 [ 10.729484] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 10.738574] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input7 [ 10.740269] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 [ 10.740698] usbcore: registered new interface driver usbhid [ 10.740702] usbhid: USB HID core driver [ 10.878631] snd_hda_intel 0000:0c:00.1: enabling device (0100 -> 0102) [ 10.879924] snd_hda_intel 0000:0c:00.1: Handle vga_switcheroo audio client [ 10.880070] Bluetooth: hci0: RTL: fw version 0x829a7644 [ 10.893377] snd_hda_intel 0000:0c:00.6: enabling device (0100 -> 0102) [ 10.918940] irq 7: nobody cared (try booting with the "irqpoll" option) [ 10.921972] CPU: 4 PID: 363 Comm: systemd-tmpfile Tainted: G B 5.12.0-rc3-debug-00033-g167e3e00e2be #1 [ 10.921980] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 10.921984] Call Trace: [ 10.921987] <IRQ> [ 10.921990] dump_stack+0x9c/0xcf [ 10.922002] __report_bad_irq+0x43/0xde [ 10.922011] note_interrupt.cold+0x28/0x8b [ 10.922019] ? add_interrupt_randomness+0x152/0x270 [ 10.922027] handle_irq_event+0x14e/0x160 [ 10.922036] ? handle_irq_event_percpu+0xf0/0xf0 [ 10.922043] ? _raw_spin_lock+0x81/0xe0 [ 10.922050] ? _raw_spin_lock_bh+0xe0/0xe0 [ 10.922057] handle_fasteoi_irq+0xfa/0x370 [ 10.922065] __common_interrupt+0x4f/0xc0 [ 10.922073] common_interrupt+0x7b/0xa0 [ 10.922081] </IRQ> [ 10.922084] asm_common_interrupt+0x1e/0x40 [ 10.922090] RIP: 0010:file_ra_state_init+0x5/0xb0 [ 10.922098] Code: 00 48 0f 44 f0 48 89 35 a9 cd bc 02 e8 d4 d4 e4 ff e9 8f fe ff ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 <41> 54 55 48 89 f5 53 48 89 fb 48 89 f7 e8 a9 ec 0c 00 48 8b 6d 00 [ 10.922104] RSP: 0018:ffffc90000fcf9e8 EFLAGS: 00000246 [ 10.922111] RAX: 0000000000000000 RBX: ffff88811ef2e5c0 RCX: ffffffffadca322f [ 10.922115] RDX: dffffc0000000000 RSI: ffff8881258b5ae8 RDI: ffff88811ef2e658 [ 10.922120] RBP: ffff8881258b5970 R08: ffffffffadca3202 R09: ffff8881258b5ad7 [ 10.922124] R10: ffffed1024b16b5a R11: 0000000000000001 R12: 0000000000000000 [ 10.922128] R13: ffff8881258b5970 R14: ffff88811ef2e604 R15: ffff88811ef2e600 [ 10.922134] ? do_dentry_open+0x352/0x6d0 [ 10.922140] ? do_dentry_open+0x37f/0x6d0 [ 10.922148] do_dentry_open+0x38f/0x6d0 [ 10.922155] ? xfs_extent_busy_ag_cmp+0x50/0x50 [xfs] [ 10.922565] path_openat+0x1278/0x1840 [ 10.922576] ? path_lookupat+0x300/0x300 [ 10.922583] ? rwsem_down_write_slowpath+0xb70/0xb70 [ 10.922592] ? handle_mm_fault+0x18f/0x3d0 [ 10.922599] ? do_user_addr_fault+0x34b/0x950 [ 10.922607] do_filp_open+0x11f/0x240 [ 10.922615] ? may_open_dev+0x50/0x50 [ 10.922624] ? __fdget+0x10/0x10 [ 10.922630] ? _raw_spin_lock+0x81/0xe0 [ 10.922637] ? _find_next_bit.constprop.0+0x3e/0xf0 [ 10.922645] ? alloc_fd+0x129/0x280 [ 10.922651] do_sys_openat2+0x114/0x230 [ 10.922658] ? build_open_flags+0x250/0x250 [ 10.922666] __x64_sys_openat+0xcd/0x140 [ 10.922672] ? __x64_sys_open+0x130/0x130 [ 10.922679] ? ktime_get_coarse_real_ts64+0x4a/0x70 [ 10.922687] do_syscall_64+0x33/0x40 [ 10.922694] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 10.922701] RIP: 0033:0x7f5dca6be8cc [ 10.922706] Code: 24 18 31 c0 41 83 e2 40 75 44 89 f0 25 00 00 41 00 3d 00 00 41 00 74 36 44 89 c2 4c 89 ce bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 48 8b 54 24 18 64 48 2b 14 25 28 00 00 00 [ 10.922712] RSP: 002b:00007ffef51fa140 EFLAGS: 00000287 ORIG_RAX: 0000000000000101 [ 10.922718] RAX: ffffffffffffffda RBX: 00005598f2a69ad0 RCX: 00007f5dca6be8cc [ 10.922723] RDX: 0000000000080000 RSI: 00007f5dc9d0215e RDI: 00000000ffffff9c [ 10.922727] RBP: 0000000000000008 R08: 0000000000080000 R09: 00007f5dc9d0215e [ 10.922731] R10: 0000000000000000 R11: 0000000000000287 R12: 00007f5dca75555f [ 10.922735] R13: 00005598f2a69ad0 R14: 0000000000000001 R15: 00005598f2a6f690 [ 10.922742] handlers: [ 10.925696] [<00000000447508a4>] amd_gpio_irq_handler [pinctrl_amd] [ 10.928757] Disabling IRQ #7 [ 11.000127] r8169 0000:0a:00.0 enp10s0: renamed from eth0 [ 11.040131] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input10 [ 11.062301] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC671: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 11.062314] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.062321] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 11.062327] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 11.062331] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 11.062335] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 11.062340] snd_hda_codec_realtek hdaudioC1D0: Line=0x1b [ 11.100251] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input12 [ 11.136401] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input13 [ 11.137883] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input14 [ 11.138953] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input15 [ 11.176742] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 [ 11.227161] Generic FE-GE Realtek PHY r8169-a00:00: attached PHY driver (mii_bus:phy_addr=r8169-a00:00, irq=MAC) [ 11.237250] kvm: Nested Virtualization enabled [ 11.237675] SVM: kvm: Nested Paging enabled [ 11.237678] SVM: Virtual VMLOAD VMSAVE supported [ 11.237680] SVM: Virtual GIF supported [ 11.254272] rtw_8821ce 0000:09:00.0: enabling device (0100 -> 0103) [ 11.255242] rtw_8821ce 0000:09:00.0: Firmware version 24.8.0, H2C version 12 [ 11.259785] MCE: In-kernel MCE decoding enabled. [ 11.363583] intel_rapl_common: Found RAPL domain package [ 11.363589] intel_rapl_common: Found RAPL domain core [ 11.410765] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 [ 11.420576] r8169 0000:0a:00.0 enp10s0: Link is Down [ 11.466717] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 11.469832] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 11.471818] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 11.472590] input: Logitech Wireless Keyboard PID:4075 Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input16 [ 11.508438] hid-generic 0003:046D:4075.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 [ 11.516054] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input21 [ 11.517269] hid-generic 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:01:00.0-11/input1:2 [ 11.562528] mousedev: PS/2 mouse device common for all mice [ 11.564389] [drm] amdgpu kernel modesetting enabled. [ 11.589805] Virtual CRAT table created for CPU [ 11.590262] amdgpu: Topology: Add CPU node [ 11.591010] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 11.591018] fb0: switching to amdgpudrmfb from EFI VGA [ 11.592584] Console: switching to colour dummy device 80x25 [ 11.592857] amdgpu 0000:0c:00.0: vgaarb: deactivate vga console [ 11.594681] amdgpu 0000:0c:00.0: enabling device (0106 -> 0107) [ 11.601781] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87D6 0xCA). [ 11.601801] amdgpu 0000:0c:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) [ 11.601948] [drm] register mmio base: 0xFCA00000 [ 11.601955] [drm] register mmio size: 524288 [ 11.601959] [drm] PCIE atomic ops is not supported [ 11.602930] [drm] add ip block number 0 <soc15_common> [ 11.602939] [drm] add ip block number 1 <gmc_v9_0> [ 11.602941] [drm] add ip block number 2 <vega10_ih> [ 11.602944] [drm] add ip block number 3 <psp> [ 11.602946] [drm] add ip block number 4 <smu> [ 11.602949] [drm] add ip block number 5 <gfx_v9_0> [ 11.602951] [drm] add ip block number 6 <sdma_v4_0> [ 11.602954] [drm] add ip block number 7 <dm> [ 11.602956] [drm] add ip block number 8 <vcn_v2_0> [ 11.602959] [drm] add ip block number 9 <jpeg_v2_0> [ 11.603002] amdgpu 0000:0c:00.0: amdgpu: Fetched VBIOS from VFCT [ 11.603051] amdgpu: ATOM BIOS: 113-RENOIR-026 [ 11.605135] [drm] VCN decode is enabled in VM mode [ 11.605141] [drm] VCN encode is enabled in VM mode [ 11.605144] [drm] JPEG decode is enabled in VM mode [ 11.606408] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 11.606531] amdgpu 0000:0c:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [ 11.606539] amdgpu 0000:0c:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 11.606545] amdgpu 0000:0c:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 11.606585] [drm] Detected VRAM RAM=512M, BAR=512M [ 11.606588] [drm] RAM width 128bits DDR4 [ 11.607685] [TTM] Zone kernel: Available graphics memory: 14040156 KiB [ 11.607693] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 11.630603] [drm] amdgpu: 512M of VRAM memory ready [ 11.630690] [drm] amdgpu: 3072M of GTT memory ready. [ 11.630759] ------------[ cut here ]------------ [ 11.630762] amdgpu 0000:0c:00.0: Buffer overflow detected. Allocation size: 3005. Mapping size: 4096. [ 11.630776] WARNING: CPU: 2 PID: 314 at kernel/dma/swiotlb.c:380 swiotlb_bounce+0x19b/0x1c0 [ 11.630787] Modules linked in: joydev fjes(-) mousedev intel_rapl_msr intel_rapl_common amdgpu(+) edac_mce_amd rtw88_8821ce rtw88_8821c rtw88_pci kvm_amd rtw88_core kvm snd_hda_codec_realtek snd_hda_codec_generic hp_wmi(+) ledtrig_audio hid_logitech_dj snd_hda_codec_hdmi wmi_bmof sparse_keymap irqbypass snd_hda_intel mac80211 snd_intel_dspcfg crct10dif_pclmul crc32_pclmul snd_intel_sdw_acpi vfat fat ghash_clmulni_intel snd_hda_codec gpu_sched i2c_algo_bit aesni_intel drm_ttm_helper ttm crypto_simd r8169 snd_hda_core cryptd drm_kms_helper rapl realtek snd_hwdep cfg80211 mdio_devres pcspkr snd_pcm k10temp cec snd_timer libphy sp5100_tco libarc4 tpm_crb snd syscopyarea i2c_piix4 ccp sysfillrect soundcore sysimgblt fb_sys_fops usbhid tpm_tis tpm_tis_core wmi video tpm gpio_amdpt pinctrl_amd rng_core gpio_generic mac_hid acpi_tad acpi_cpufreq btusb btrtl btbcm btintel bluetooth ecdh_generic rfkill ecc crc16 pkcs8_key_parser drm fuse agpgart bpf_preload ip_tables x_tables xfs libcrc32c [ 11.630983] crc32c_generic crc32c_intel xhci_pci xhci_pci_renesas [ 11.630996] CPU: 2 PID: 314 Comm: systemd-udevd Tainted: G B 5.12.0-rc3-debug-00033-g167e3e00e2be #1 [ 11.631003] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 11.631007] RIP: 0010:swiotlb_bounce+0x19b/0x1c0 [ 11.631014] Code: ef e8 a9 df 28 00 4c 8b 6d 00 48 89 ef e8 4d 23 8c 00 4d 89 f0 48 89 d9 4c 89 ea 48 89 c6 48 c7 c7 a0 ed e8 ae e8 3d 57 e7 00 <0f> 0b 48 c7 c7 e0 89 5b af 49 89 de e8 74 df 28 00 48 8b 05 dd 41 [ 11.631020] RSP: 0018:ffffc9000190f138 EFLAGS: 00010286 [ 11.631026] RAX: 0000000000000000 RBX: 0000000000000bbd RCX: 0000000000000000 [ 11.631030] RDX: 0000000000000027 RSI: 0000000000000004 RDI: fffff52000321e19 [ 11.631034] RBP: ffff8881050190c8 R08: ffffffffadacdcae R09: ffff8887c32a06eb [ 11.631038] R10: ffffed10f86540dd R11: 0000000000000001 R12: 000000000a20d443 [ 11.631042] R13: ffff888105081c90 R14: 0000000000001000 R15: 0000000000000002 [ 11.631046] FS: 00007fbdc0f1ca40(0000) GS:ffff8887c3280000(0000) knlGS:0000000000000000 [ 11.631051] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 11.631055] CR2: 00007fd6d40117f8 CR3: 000000013da9c000 CR4: 0000000000350ee0 [ 11.631060] Call Trace: [ 11.631065] swiotlb_tbl_map_single+0x6bb/0x6f0 [ 11.631074] swiotlb_map+0xc1/0x3f0 [ 11.631080] ? drm_mm_init+0x126/0x140 [drm] [ 11.631206] ? swiotlb_sync_single_for_cpu+0x20/0x20 [ 11.631213] ? ttm_range_man_init+0xdd/0x100 [ttm] [ 11.631236] ? amdgpu_ttm_init.cold+0x153/0x16f [amdgpu] [ 11.632193] dma_map_page_attrs+0x299/0x390 [ 11.632200] ? dmam_free_coherent+0xe0/0xe0 [ 11.632207] amdgpu_gart_init+0x77/0xf0 [amdgpu] [ 11.632909] gmc_v9_0_sw_init+0x910/0x980 [amdgpu] [ 11.633492] ? gmc_v9_0_late_init+0xe0/0xe0 [amdgpu] [ 11.634128] ? __drmm_add_action+0xf0/0x140 [drm] [ 11.634214] ? drm_mode_config_cleanup+0x480/0x480 [drm] [ 11.634297] ? drm_mode_config_cleanup+0x480/0x480 [drm] [ 11.634381] amdgpu_device_init.cold+0x1483/0x2400 [amdgpu] [ 11.635013] ? amdgpu_device_cache_pci_state+0x90/0x90 [amdgpu] [ 11.635601] ? pci_find_saved_ext_cap+0x80/0x80 [ 11.635607] ? pci_bus_read_config_byte+0xf0/0xf0 [ 11.635611] ? __list_add_valid+0x2b/0xa0 [ 11.635616] ? kasan_unpoison+0x3a/0x60 [ 11.635621] ? pci_enable_device_flags+0x19c/0x250 [ 11.635625] ? pci_enable_bridge+0xe0/0xe0 [ 11.635630] amdgpu_driver_load_kms+0xb1/0x3f0 [amdgpu] [ 11.636214] amdgpu_pci_probe+0x172/0x200 [amdgpu] [ 11.636796] ? amdgpu_pci_remove+0x80/0x80 [amdgpu] [ 11.637510] local_pci_probe+0x74/0xc0 [ 11.637517] pci_device_probe+0x1ee/0x300 [ 11.637522] ? pci_device_remove+0x100/0x100 [ 11.637527] ? kernfs_put+0x18/0x30 [ 11.637531] ? sysfs_do_create_link_sd+0x76/0xd0 [ 11.637536] really_probe+0x185/0x6c0 [ 11.637541] driver_probe_device+0x13f/0x1d0 [ 11.637545] device_driver_attach+0x110/0x120 [ 11.637549] ? device_driver_attach+0x120/0x120 [ 11.637553] __driver_attach+0xae/0x1a0 [ 11.637557] ? device_driver_attach+0x120/0x120 [ 11.637560] bus_for_each_dev+0xe6/0x140 [ 11.637565] ? subsys_dev_iter_exit+0x10/0x10 [ 11.637569] ? __list_add_valid+0x2b/0xa0 [ 11.637574] bus_add_driver+0x1f8/0x2e0 [ 11.637580] driver_register+0x10f/0x190 [ 11.637584] ? 0xffffffffc1588000 [ 11.637588] do_one_initcall+0x89/0x2a0 [ 11.637593] ? perf_trace_initcall_level+0x230/0x230 [ 11.637597] ? kfree+0xc3/0x480 [ 11.637602] ? kasan_set_track+0x1c/0x30 [ 11.637607] ? kasan_unpoison+0x3a/0x60 [ 11.637611] ? kasan_unpoison+0x3a/0x60 [ 11.637615] do_init_module+0xfd/0x3c0 [ 11.637622] load_module+0x3f44/0x41a0 [ 11.637626] ? xfs_file_buffered_read+0x82/0x130 [xfs] [ 11.637883] ? module_frob_arch_sections+0x20/0x20 [ 11.637888] ? kernel_read+0x46/0xb0 [ 11.637893] ? kernel_read_file+0x1d2/0x3e0 [ 11.637901] ? __do_sys_finit_module+0x110/0x1a0 [ 11.637905] __do_sys_finit_module+0x110/0x1a0 [ 11.637909] ? __ia32_sys_init_module+0x40/0x40 [ 11.637913] ? get_nth_filter.part.0+0x170/0x170 [ 11.637918] ? randomize_stack_top+0x80/0x80 [ 11.637923] ? __ia32_compat_sys_newlstat+0x30/0x30 [ 11.637929] ? __audit_syscall_entry+0x193/0x1f0 [ 11.637933] ? ktime_get_coarse_real_ts64+0x4a/0x70 [ 11.637938] do_syscall_64+0x33/0x40 [ 11.637944] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 11.637949] RIP: 0033:0x7fbdc184c18d [ 11.637953] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 11.637957] RSP: 002b:00007ffeae8de308 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 11.637962] RAX: ffffffffffffffda RBX: 000055db08823060 RCX: 00007fbdc184c18d [ 11.637965] RDX: 0000000000000000 RSI: 00007fbdc19a9a9d RDI: 0000000000000018 [ 11.637970] RBP: 0000000000020000 R08: 0000000000000000 R09: 00007fbdc1bdc5ea [ 11.637973] R10: 0000000000000018 R11: 0000000000000246 R12: 00007fbdc19a9a9d [ 11.637975] R13: 0000000000000000 R14: 000055db088292c0 R15: 000055db08823060 [ 11.637980] ---[ end trace bee6f34729e28f2c ]--- [ 11.637985] BUG: unable to handle page fault for address: 000008714b909443 [ 11.637995] #PF: supervisor write access in kernel mode [ 11.638001] #PF: error_code(0x0002) - not-present page [ 11.638007] PGD 0 P4D 0 [ 11.638014] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 11.638021] CPU: 2 PID: 314 Comm: systemd-udevd Tainted: G B W 5.12.0-rc3-debug-00033-g167e3e00e2be #1 [ 11.638031] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 11.638038] RIP: 0010:__memcpy+0x12/0x20 [ 11.638044] Code: 74 e0 8b 05 38 4e 67 01 85 c0 75 d6 e8 47 6f 6d ff b8 01 00 00 00 c3 cc 0f 1f 44 00 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4 [ 11.638058] RSP: 0018:ffffc9000190f188 EFLAGS: 00010206 [ 11.638065] RAX: 000008714b909443 RBX: 000000000a20d000 RCX: 0000000000000177 [ 11.638071] RDX: 0000000000000005 RSI: ffff88800a20d443 RDI: 000008714b909443 [ 11.638078] RBP: 0000000000000002 R08: 0000000000000001 R09: 000008714b90a000 [ 11.638085] R10: ffffed1001441bff R11: 0000000000000001 R12: 0000000000000002 [ 11.638091] R13: ffff8887c008f000 R14: 0000000000000048 R15: 0000000000000002 [ 11.638098] FS: 00007fbdc0f1ca40(0000) GS:ffff8887c3280000(0000) knlGS:0000000000000000 [ 11.638106] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 11.638112] CR2: 000008714b909443 CR3: 000000013da9c000 CR4: 0000000000350ee0 [ 11.638119] Call Trace: [ 11.638123] swiotlb_tbl_map_single+0x6bb/0x6f0 [ 11.638133] swiotlb_map+0xc1/0x3f0 [ 11.638141] ? drm_mm_init+0x126/0x140 [drm] [ 11.638225] ? swiotlb_sync_single_for_cpu+0x20/0x20 [ 11.638232] ? ttm_range_man_init+0xdd/0x100 [ttm] [ 11.638251] ? amdgpu_ttm_init.cold+0x153/0x16f [amdgpu] [ 11.638881] dma_map_page_attrs+0x299/0x390 [ 11.638888] ? dmam_free_coherent+0xe0/0xe0 [ 11.638896] amdgpu_gart_init+0x77/0xf0 [amdgpu] [ 11.639489] gmc_v9_0_sw_init+0x910/0x980 [amdgpu] [ 11.640090] ? gmc_v9_0_late_init+0xe0/0xe0 [amdgpu] [ 11.640860] ? __drmm_add_action+0xf0/0x140 [drm] [ 11.641004] ? drm_mode_config_cleanup+0x480/0x480 [drm] [ 11.641127] ? drm_mode_config_cleanup+0x480/0x480 [drm] [ 11.641222] amdgpu_device_init.cold+0x1483/0x2400 [amdgpu] [ 11.641849] ? amdgpu_device_cache_pci_state+0x90/0x90 [amdgpu] [ 11.642456] ? pci_find_saved_ext_cap+0x80/0x80 [ 11.642466] ? pci_bus_read_config_byte+0xf0/0xf0 [ 11.642473] ? __list_add_valid+0x2b/0xa0 [ 11.642481] ? kasan_unpoison+0x3a/0x60 [ 11.642490] ? pci_enable_device_flags+0x19c/0x250 [ 11.642497] ? pci_enable_bridge+0xe0/0xe0 [ 11.642505] amdgpu_driver_load_kms+0xb1/0x3f0 [amdgpu] [ 11.643105] amdgpu_pci_probe+0x172/0x200 [amdgpu] [ 11.643686] ? amdgpu_pci_remove+0x80/0x80 [amdgpu] [ 11.644405] local_pci_probe+0x74/0xc0 [ 11.644415] pci_device_probe+0x1ee/0x300 [ 11.644422] ? pci_device_remove+0x100/0x100 [ 11.644430] ? kernfs_put+0x18/0x30 [ 11.644437] ? sysfs_do_create_link_sd+0x76/0xd0 [ 11.644446] really_probe+0x185/0x6c0 [ 11.644453] driver_probe_device+0x13f/0x1d0 [ 11.644460] device_driver_attach+0x110/0x120 [ 11.644467] ? device_driver_attach+0x120/0x120 [ 11.644474] __driver_attach+0xae/0x1a0 [ 11.644480] ? device_driver_attach+0x120/0x120 [ 11.644487] bus_for_each_dev+0xe6/0x140 [ 11.644494] ? subsys_dev_iter_exit+0x10/0x10 [ 11.644501] ? __list_add_valid+0x2b/0xa0 [ 11.644510] bus_add_driver+0x1f8/0x2e0 [ 11.644518] driver_register+0x10f/0x190 [ 11.644525] ? 0xffffffffc1588000 [ 11.644531] do_one_initcall+0x89/0x2a0 [ 11.644539] ? perf_trace_initcall_level+0x230/0x230 [ 11.644547] ? kfree+0xc3/0x480 [ 11.644554] ? kasan_set_track+0x1c/0x30 [ 11.644561] ? kasan_unpoison+0x3a/0x60 [ 11.644568] ? kasan_unpoison+0x3a/0x60 [ 11.644576] do_init_module+0xfd/0x3c0 [ 11.644585] load_module+0x3f44/0x41a0 [ 11.644592] ? xfs_file_buffered_read+0x82/0x130 [xfs] [ 11.644852] ? module_frob_arch_sections+0x20/0x20 [ 11.644860] ? kernel_read+0x46/0xb0 [ 11.644868] ? kernel_read_file+0x1d2/0x3e0 [ 11.644879] ? __do_sys_finit_module+0x110/0x1a0 [ 11.644886] __do_sys_finit_module+0x110/0x1a0 [ 11.644893] ? __ia32_sys_init_module+0x40/0x40 [ 11.644900] ? get_nth_filter.part.0+0x170/0x170 [ 11.644909] ? randomize_stack_top+0x80/0x80 [ 11.644918] ? __ia32_compat_sys_newlstat+0x30/0x30 [ 11.644927] ? __audit_syscall_entry+0x193/0x1f0 [ 11.644934] ? ktime_get_coarse_real_ts64+0x4a/0x70 [ 11.644943] do_syscall_64+0x33/0x40 [ 11.644951] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 11.644959] RIP: 0033:0x7fbdc184c18d [ 11.644965] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 11.644979] RSP: 002b:00007ffeae8de308 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 11.644989] RAX: ffffffffffffffda RBX: 000055db08823060 RCX: 00007fbdc184c18d [ 11.644996] RDX: 0000000000000000 RSI: 00007fbdc19a9a9d RDI: 0000000000000018 [ 11.645002] RBP: 0000000000020000 R08: 0000000000000000 R09: 00007fbdc1bdc5ea [ 11.645009] R10: 0000000000000018 R11: 0000000000000246 R12: 00007fbdc19a9a9d [ 11.645015] R13: 0000000000000000 R14: 000055db088292c0 R15: 000055db08823060 [ 11.645024] Modules linked in: joydev mousedev intel_rapl_msr intel_rapl_common amdgpu(+) edac_mce_amd rtw88_8821ce rtw88_8821c rtw88_pci kvm_amd rtw88_core kvm snd_hda_codec_realtek snd_hda_codec_generic hp_wmi(+) ledtrig_audio hid_logitech_dj snd_hda_codec_hdmi wmi_bmof sparse_keymap irqbypass snd_hda_intel mac80211 snd_intel_dspcfg crct10dif_pclmul crc32_pclmul snd_intel_sdw_acpi vfat fat ghash_clmulni_intel snd_hda_codec gpu_sched i2c_algo_bit aesni_intel drm_ttm_helper ttm crypto_simd r8169 snd_hda_core cryptd drm_kms_helper rapl realtek snd_hwdep cfg80211 mdio_devres pcspkr snd_pcm k10temp cec snd_timer libphy sp5100_tco libarc4 tpm_crb snd syscopyarea i2c_piix4 ccp sysfillrect soundcore sysimgblt fb_sys_fops usbhid tpm_tis tpm_tis_core wmi video tpm gpio_amdpt pinctrl_amd rng_core gpio_generic mac_hid acpi_tad acpi_cpufreq btusb btrtl btbcm btintel bluetooth ecdh_generic rfkill ecc crc16 pkcs8_key_parser drm fuse agpgart bpf_preload ip_tables x_tables xfs libcrc32c crc32c_generic [ 11.645156] crc32c_intel xhci_pci xhci_pci_renesas [ 11.645210] CR2: 000008714b909443 [ 11.645216] ---[ end trace bee6f34729e28f2d ]--- [ 11.645221] RIP: 0010:__memcpy+0x12/0x20 [ 11.645227] Code: 74 e0 8b 05 38 4e 67 01 85 c0 75 d6 e8 47 6f 6d ff b8 01 00 00 00 c3 cc 0f 1f 44 00 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4 [ 11.645241] RSP: 0018:ffffc9000190f188 EFLAGS: 00010206 [ 11.645247] RAX: 000008714b909443 RBX: 000000000a20d000 RCX: 0000000000000177 [ 11.645254] RDX: 0000000000000005 RSI: ffff88800a20d443 RDI: 000008714b909443 [ 11.645261] RBP: 0000000000000002 R08: 0000000000000001 R09: 000008714b90a000 [ 11.645268] R10: ffffed1001441bff R11: 0000000000000001 R12: 0000000000000002 [ 11.645274] R13: ffff8887c008f000 R14: 0000000000000048 R15: 0000000000000002 [ 11.645281] FS: 00007fbdc0f1ca40(0000) GS:ffff8887c3280000(0000) knlGS:0000000000000000 [ 11.645289] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 11.645295] CR2: 000008714b909443 CR3: 000000013da9c000 CR4: 0000000000350ee0 [ 11.911417] input: Logitech Wireless Keyboard PID:4075 as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input25 [ 11.916555] logitech-hidpp-device 0003:046D:4075.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 [ 11.999932] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input26 [ 12.003578] logitech-hidpp-device 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:01:00.0-11/input1:2 [ 12.093114] rtw_8821ce 0000:09:00.0: start vif 74:12:b3:a0:4a:cb on port 0 [ 14.558903] r8169 0000:0a:00.0 enp10s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 14.558977] IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready [ 16.594062] kauditd_printk_skb: 32 callbacks suppressed [ 16.594072] audit: type=1131 audit(1625508119.391:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.787517] audit: type=1101 audit(1625508125.584:45): pid=431 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' [ 22.795143] audit: type=1103 audit(1625508125.591:46): pid=431 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' [ 22.795888] audit: type=1006 audit(1625508125.591:47): pid=431 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 [ 22.796100] audit: type=1300 audit(1625508125.591:47): arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffe0d54df00 a2=4 a3=3e8 items=0 ppid=394 pid=431 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="sshd" exe="/usr/bin/sshd" key=(null) [ 22.800853] audit: type=1327 audit(1625508125.591:47): proctitle=737368643A206E617468616E205B707269765D [ 22.877834] audit: type=1130 audit(1625508125.674:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.917759] audit: type=1101 audit(1625508125.714:49): pid=434 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.918096] audit: type=1103 audit(1625508125.714:50): pid=434 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' [ 22.918709] audit: type=1006 audit(1625508125.714:51): pid=434 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1 [ 22.918795] audit: type=1300 audit(1625508125.714:51): arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7fff13327970 a2=4 a3=3e8 items=0 ppid=1 pid=434 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null) [ 30.400687] kauditd_printk_skb: 11 callbacks suppressed [ 30.400699] audit: type=1100 audit(1625508133.194:60): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="nathan" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.405376] audit: type=1101 audit(1625508133.201:61): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.406114] audit: type=1110 audit(1625508133.201:62): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.407411] audit: type=1105 audit(1625508133.204:63): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.473080] audit: type=1106 audit(1625508133.268:64): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.474043] audit: type=1104 audit(1625508133.271:65): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 32.679545] audit: type=1101 audit(1625508135.474:66): pid=646 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 32.680133] audit: type=1110 audit(1625508135.474:67): pid=646 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 32.681346] audit: type=1105 audit(1625508135.478:68): pid=646 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 0.000000] Linux version 5.12.0-rc3-debug-00033-g167e3e00e2be (nathan@archlinux-ax161) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Mon Jul 5 10:52:15 MST 2021 [ 0.000000] Command line: initrd=amd-ucode.img initrd=initramfs-linux-debug.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c0ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009c10000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20d000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000b838ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b8a15000-0x00000000badfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000badff000-0x00000000bbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000081f380000-0x000000083fffffff] reserved [ 0.000000] intel_pstate: HWP disabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable [ 0.000000] e820: update [mem 0xb4c66018-0xb4c73457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009c0ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000009c10000-0x0000000009ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000000a20d000-0x000000000affffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000b4c66017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b4c66018-0x00000000b4c73457] usable [ 0.000000] reserve setup_data: [mem 0x00000000b4c73458-0x00000000b838ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b8390000-0x00000000b86c5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b86c6000-0x00000000b8721fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000b8722000-0x00000000b8a14fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000b8a15000-0x00000000badfefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000badff000-0x00000000bbffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bc000000-0x00000000bdffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000081f37ffff] usable [ 0.000000] reserve setup_data: [mem 0x000000081f380000-0x000000083fffffff] reserved [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI=0xb8721000 ACPI 2.0=0xb8721014 TPMFinalLog=0xb89c8000 SMBIOS=0xbac0f000 SMBIOS 3.0=0xbac0e000 MEMATTR=0xb5183018 ESRT=0xb6cf5018 RNG=0xbac3e998 TPMEventLog=0xb5184018 [ 0.000000] efi: seeding entropy pool [ 0.000000] SMBIOS 3.3.0 present. [ 0.000000] DMI: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3792.936 MHz processor [ 0.000280] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000287] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000309] last_pfn = 0x81f380 max_arch_pfn = 0x400000000 [ 0.000615] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001571] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.001586] last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.006163] esrt: Reserving ESRT space from 0x00000000b6cf5018 to 0x00000000b6cf5050. [ 0.006185] e820: update [mem 0xb6cf5000-0xb6cf5fff] usable ==> reserved [ 0.006628] check: Scanning 1 areas for low memory corruption [ 0.006637] Using GB pages for direct mapping [ 0.012545] Secure boot disabled [ 0.012547] RAMDISK: [mem 0x7f7c7000-0x7fff5fff] [ 0.012570] ACPI: Early table checksum verification disabled [ 0.012577] ACPI: RSDP 0x00000000B8721014 000024 (v02 HPQOEM) [ 0.012586] ACPI: XSDT 0x00000000B8720728 0000EC (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.012598] ACPI: FACP 0x00000000B870F000 000114 (v06 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012612] ACPI: DSDT 0x00000000B86FE000 01050C (v02 HPQOEM SLIC-CPC 01072009 INTL 20120913) [ 0.012622] ACPI: FACS 0x00000000B89F8000 000040 [ 0.012630] ACPI: MSDM 0x00000000B871F000 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.012638] ACPI: SSDT 0x00000000B871E000 000050 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012646] ACPI: IVRS 0x00000000B871D000 0000D0 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000000) [ 0.012654] ACPI: SSDT 0x00000000B8715000 007229 (v02 HPQOEM SLIC-CPC 00000002 MSFT 04000000) [ 0.012662] ACPI: SSDT 0x00000000B8711000 003BA1 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012670] ACPI: SSDT 0x00000000B8710000 000094 (v02 HPQOEM SLIC-CPC 01072009 AMI 01072009) [ 0.012678] ACPI: FIDT 0x00000000B86FD000 00009C (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012686] ACPI: MCFG 0x00000000B86FC000 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00010013) [ 0.012694] ACPI: HPET 0x00000000B86FB000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00000005) [ 0.012702] ACPI: VFCT 0x00000000B86ED000 00D484 (v01 HPQOEM SLIC-CPC 00000001 AMD 31504F47) [ 0.012710] ACPI: BGRT 0x00000000B86EC000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012718] ACPI: TPM2 0x00000000B86EB000 00004C (v04 HPQOEM SLIC-CPC 00000001 AMI 00000000) [ 0.012726] ACPI: SSDT 0x00000000B86E9000 001CE4 (v02 HPQOEM SLIC-CPC 00000001 AMD 00000001) [ 0.012734] ACPI: CRAT 0x00000000B86E8000 0007E8 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) [ 0.012742] ACPI: CDIT 0x00000000B86E7000 000029 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001) [ 0.012750] ACPI: SSDT 0x00000000B86E6000 000D37 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012758] ACPI: SSDT 0x00000000B86E4000 0010A5 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012765] ACPI: SSDT 0x00000000B86E0000 00333E (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012773] ACPI: SSDT 0x00000000B86DF000 0000BF (v01 HPQOEM SLIC-CPC 00001000 INTL 20120913) [ 0.012781] ACPI: WSMT 0x00000000B86DE000 000028 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012789] ACPI: APIC 0x00000000B86DD000 00015E (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.012797] ACPI: SSDT 0x00000000B86DC000 000517 (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012805] ACPI: SSDT 0x00000000B86DA000 0010AF (v01 HPQOEM SLIC-CPC 00000001 INTL 20120913) [ 0.012813] ACPI: FPDT 0x00000000B86D9000 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.012827] ACPI: Local APIC address 0xfee00000 [ 0.013152] No NUMA configuration found [ 0.013154] Faking a node at [mem 0x0000000000000000-0x000000081f37ffff] [ 0.013164] NODE_DATA(0) allocated [mem 0x81f37c000-0x81f37ffff] [ 0.013278] Zone ranges: [ 0.013280] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013284] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013288] Normal [mem 0x0000000100000000-0x000000081f37ffff] [ 0.013292] Device empty [ 0.013295] Movable zone start for each node [ 0.013297] Early memory node ranges [ 0.013298] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.013301] node 0: [mem 0x0000000000100000-0x0000000009c0ffff] [ 0.013304] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.013306] node 0: [mem 0x000000000a20d000-0x000000000affffff] [ 0.013309] node 0: [mem 0x000000000b020000-0x00000000b838ffff] [ 0.013312] node 0: [mem 0x00000000badff000-0x00000000bbffffff] [ 0.013314] node 0: [mem 0x0000000100000000-0x000000081f37ffff] [ 0.013322] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff] [ 0.013326] On node 0 totalpages: 8225939 [ 0.013329] DMA zone: 64 pages used for memmap [ 0.013331] DMA zone: 26 pages reserved [ 0.013334] DMA zone: 3999 pages, LIFO batch:0 [ 0.015777] DMA zone: 28769 pages in unavailable ranges [ 0.015779] DMA32 zone: 11782 pages used for memmap [ 0.015781] DMA32 zone: 754036 pages, LIFO batch:63 [ 0.059946] DMA32 zone: 28300 pages in unavailable ranges [ 0.059954] Normal zone: 116686 pages used for memmap [ 0.059956] Normal zone: 7467904 pages, LIFO batch:63 [ 0.477178] Normal zone: 3200 pages in unavailable ranges [ 0.918352] kasan: KernelAddressSanitizer initialized [ 0.918877] ACPI: PM-Timer IO Port: 0x808 [ 0.918881] ACPI: Local APIC address 0xfee00000 [ 0.918894] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.918911] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.918918] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.918923] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.918927] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.918931] ACPI: IRQ0 used by override. [ 0.918934] ACPI: IRQ9 used by override. [ 0.918939] Using ACPI (MADT) for SMP configuration information [ 0.918942] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.918969] e820: update [mem 0xb5158000-0xb517ffff] usable ==> reserved [ 0.919000] smpboot: Allowing 32 CPUs, 24 hotplug CPUs [ 0.919115] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.919122] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.919129] PM: hibernation: Registered nosave memory: [mem 0x09c10000-0x09ffffff] [ 0.919136] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff] [ 0.919143] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.919150] PM: hibernation: Registered nosave memory: [mem 0xb4c66000-0xb4c66fff] [ 0.919157] PM: hibernation: Registered nosave memory: [mem 0xb4c73000-0xb4c73fff] [ 0.919164] PM: hibernation: Registered nosave memory: [mem 0xb5158000-0xb517ffff] [ 0.919171] PM: hibernation: Registered nosave memory: [mem 0xb6cf5000-0xb6cf5fff] [ 0.919179] PM: hibernation: Registered nosave memory: [mem 0xb8390000-0xb86c5fff] [ 0.919181] PM: hibernation: Registered nosave memory: [mem 0xb86c6000-0xb8721fff] [ 0.919183] PM: hibernation: Registered nosave memory: [mem 0xb8722000-0xb8a14fff] [ 0.919186] PM: hibernation: Registered nosave memory: [mem 0xb8a15000-0xbadfefff] [ 0.919193] PM: hibernation: Registered nosave memory: [mem 0xbc000000-0xbdffffff] [ 0.919196] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbeffffff] [ 0.919198] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff] [ 0.919201] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff] [ 0.919203] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.919205] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff] [ 0.919208] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff] [ 0.919210] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff] [ 0.919213] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd6fffff] [ 0.919215] PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff] [ 0.919217] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ 0.919220] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ 0.919222] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ 0.919225] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.919227] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.919229] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ 0.919232] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ 0.919234] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ 0.919237] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.919239] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.919241] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.919244] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.919246] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.919249] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] [ 0.919251] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] [ 0.919253] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] [ 0.919256] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] [ 0.919258] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff] [ 0.919261] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.919266] [mem 0xc0000000-0xefffffff] available for PCI devices [ 0.919270] Booting paravirtualized kernel on bare hardware [ 0.919274] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.927878] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1 [ 0.929637] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144 [ 0.929671] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152 [ 0.929677] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.929704] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.929806] Built 1 zonelists, mobility grouping on. Total pages: 8097381 [ 0.929809] Policy zone: Normal [ 0.929812] Kernel command line: initrd=amd-ucode.img initrd=initramfs-linux-debug.img root=PARTUUID=8680aa0c-cf09-4a69-8cf3-970478040ee7 rw intel_pstate=no_hwp [ 0.929899] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.929901] printk: log_buf_len total cpu_extra contributions: 126976 bytes [ 0.929903] printk: log_buf_len min size: 131072 bytes [ 0.930262] printk: log_buf_len: 262144 bytes [ 0.930264] printk: early log buf free: 114328(87%) [ 0.933977] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.935848] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.936118] mem auto-init: stack:off, heap alloc:on, heap free:off [ 1.642466] Memory: 27987960K/32903756K available (20488K kernel code, 7279K rwdata, 8472K rodata, 2012K init, 5244K bss, 4915540K reserved, 0K cma-reserved) [ 1.642480] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0 [ 1.643591] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 1.643651] ftrace: allocating 41986 entries in 165 pages [ 1.667334] ftrace: allocated 165 pages with 4 groups [ 1.668416] rcu: Preemptible hierarchical RCU implementation. [ 1.668418] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 1.668420] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32. [ 1.668422] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 1.668425] Trampoline variant of Tasks RCU enabled. [ 1.668427] Rude variant of Tasks RCU enabled. [ 1.668428] Tracing variant of Tasks RCU enabled. [ 1.668430] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 1.668432] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 1.700587] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16 [ 1.701467] Console: colour dummy device 80x25 [ 1.701534] printk: console [tty0] enabled [ 1.701628] ACPI: Core revision 20210105 [ 1.703688] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 1.703717] APIC: Switch to symmetric I/O mode setup [ 1.705705] Switched APIC routing to physical flat. [ 1.707227] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.723724] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d588d6a09c, max_idle_ns: 881590727049 ns [ 1.723739] Calibrating delay loop (skipped), value calculated using timer frequency.. 7588.95 BogoMIPS (lpj=12643120) [ 1.723745] pid_max: default: 32768 minimum: 301 [ 1.733354] LSM: Security Framework initializing [ 1.733395] Yama: becoming mindful. [ 1.733644] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.733718] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.735662] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 1.735762] LVT offset 1 assigned for vector 0xf9 [ 1.735819] LVT offset 2 assigned for vector 0xf4 [ 1.735836] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 1.735839] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 1.735845] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.735849] Spectre V2 : Mitigation: Full AMD retpoline [ 1.735851] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.735853] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.735855] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.735858] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 1.735860] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 1.736225] Freeing SMP alternatives memory: 32K [ 1.844242] smpboot: CPU0: AMD Ryzen 3 4300G with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1) [ 1.845243] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 1.845254] ... version: 0 [ 1.845256] ... bit width: 48 [ 1.845258] ... generic registers: 6 [ 1.845259] ... value mask: 0000ffffffffffff [ 1.845261] ... max period: 00007fffffffffff [ 1.845263] ... fixed-purpose events: 0 [ 1.845265] ... event mask: 000000000000003f [ 1.845496] rcu: Hierarchical SRCU implementation. [ 1.849560] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.852535] smp: Bringing up secondary CPUs ... [ 1.853409] x86: Booting SMP configuration: [ 1.853412] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 1.874254] smp: Brought up 1 node, 8 CPUs [ 1.874260] smpboot: Max logical packages: 4 [ 1.874262] smpboot: Total of 8 processors activated (60711.60 BogoMIPS) [ 1.882108] devtmpfs: initialized [ 1.882108] x86/mm: Memory block size: 128MB [ 1.931108] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes) [ 1.931108] PM: Registering ACPI NVS region [mem 0xb8722000-0xb8a14fff] (3092480 bytes) [ 1.935783] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 1.935824] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 1.936354] pinctrl core: initialized pinctrl subsystem [ 1.937662] PM: RTC time: 18:01:44, date: 2021-07-05 [ 1.938802] NET: Registered protocol family 16 [ 1.940659] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 1.941182] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.941702] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.941826] audit: initializing netlink subsys (disabled) [ 1.941904] audit: type=2000 audit(1625508104.233:1): state=initialized audit_enabled=0 res=1 [ 1.944097] thermal_sys: Registered thermal governor 'fair_share' [ 1.944100] thermal_sys: Registered thermal governor 'bang_bang' [ 1.944102] thermal_sys: Registered thermal governor 'step_wise' [ 1.944104] thermal_sys: Registered thermal governor 'user_space' [ 1.944106] thermal_sys: Registered thermal governor 'power_allocator' [ 1.944183] cpuidle: using governor ladder [ 1.944183] cpuidle: using governor menu [ 1.944183] ACPI: bus type PCI registered [ 1.944183] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.944828] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 1.944842] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 1.950889] PCI: Using configuration type 1 for base access [ 1.983636] Kprobes globally optimized [ 1.983989] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.983989] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.992155] ACPI: Added _OSI(Module Device) [ 1.992159] ACPI: Added _OSI(Processor Device) [ 1.992161] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.992163] ACPI: Added _OSI(Processor Aggregator Device) [ 1.992180] ACPI: Added _OSI(Linux-Dell-Video) [ 1.992194] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.992207] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 2.797646] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 2.847458] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 3.194961] ACPI: EC: EC started [ 3.194966] ACPI: EC: interrupt blocked [ 3.195008] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.195018] ACPI: _SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 3.195024] ACPI: Interpreter enabled [ 3.195193] ACPI: (supports S0 S3 S4 S5) [ 3.195196] ACPI: Using IOAPIC for interrupt routing [ 3.200393] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.215236] ACPI: Enabled 4 GPEs in block 00 to 1F [ 3.580211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 3.580251] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 3.588446] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 3.596390] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 3.596579] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 3.610071] PCI host bridge to bus 0000:00 [ 3.610083] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 3.610096] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 3.610107] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 3.610118] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 3.610130] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.610141] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 3.610152] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window] [ 3.610163] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 3.610176] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.610333] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 [ 3.612614] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 [ 3.614862] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 [ 3.616444] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 [ 3.618052] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 [ 3.618078] pci 0000:00:02.1: enabling Extended Tags [ 3.618183] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold [ 3.622301] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 [ 3.622328] pci 0000:00:02.2: enabling Extended Tags [ 3.622432] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 3.625017] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 [ 3.626612] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 [ 3.626637] pci 0000:00:08.1: enabling Extended Tags [ 3.626737] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 3.629320] pci 0000:00:08.2: [1022:1635] type 01 class 0x060400 [ 3.629345] pci 0000:00:08.2: enabling Extended Tags [ 3.629445] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 3.632062] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 3.634325] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 3.636604] pci 0000:00:18.0: [1022:1448] type 00 class 0x060000 [ 3.638170] pci 0000:00:18.1: [1022:1449] type 00 class 0x060000 [ 3.639716] pci 0000:00:18.2: [1022:144a] type 00 class 0x060000 [ 3.641299] pci 0000:00:18.3: [1022:144b] type 00 class 0x060000 [ 3.642859] pci 0000:00:18.4: [1022:144c] type 00 class 0x060000 [ 3.644429] pci 0000:00:18.5: [1022:144d] type 00 class 0x060000 [ 3.645990] pci 0000:00:18.6: [1022:144e] type 00 class 0x060000 [ 3.647557] pci 0000:00:18.7: [1022:144f] type 00 class 0x060000 [ 3.650047] pci 0000:01:00.0: [1022:43d1] type 00 class 0x0c0330 [ 3.650068] pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit] [ 3.650111] pci 0000:01:00.0: enabling Extended Tags [ 3.650313] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 3.651859] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601 [ 3.651897] pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff] [ 3.651905] pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref] [ 3.651914] pci 0000:01:00.1: enabling Extended Tags [ 3.652099] pci 0000:01:00.1: PME# supported from D3hot D3cold [ 3.660042] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400 [ 3.660088] pci 0000:01:00.2: enabling Extended Tags [ 3.660269] pci 0000:01:00.2: PME# supported from D3hot D3cold [ 3.661760] pci 0000:00:02.1: PCI bridge to [bus 01-0a] [ 3.661766] pci 0000:00:02.1: bridge window [io 0xd000-0xefff] [ 3.661771] pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] [ 3.664265] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400 [ 3.664314] pci 0000:02:00.0: enabling Extended Tags [ 3.664573] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 3.666425] pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400 [ 3.666473] pci 0000:02:01.0: enabling Extended Tags [ 3.666735] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 3.668564] pci 0000:02:02.0: [1022:43c7] type 01 class 0x060400 [ 3.668612] pci 0000:02:02.0: enabling Extended Tags [ 3.668876] pci 0000:02:02.0: PME# supported from D3hot D3cold [ 3.670718] pci 0000:02:03.0: [1022:43c7] type 01 class 0x060400 [ 3.670766] pci 0000:02:03.0: enabling Extended Tags [ 3.671027] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 3.672863] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400 [ 3.672912] pci 0000:02:04.0: enabling Extended Tags [ 3.673170] pci 0000:02:04.0: PME# supported from D3hot D3cold [ 3.675020] pci 0000:02:05.0: [1022:43c7] type 01 class 0x060400 [ 3.675069] pci 0000:02:05.0: enabling Extended Tags [ 3.675331] pci 0000:02:05.0: PME# supported from D3hot D3cold [ 3.677201] pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400 [ 3.677249] pci 0000:02:06.0: enabling Extended Tags [ 3.677509] pci 0000:02:06.0: PME# supported from D3hot D3cold [ 3.679360] pci 0000:02:07.0: [1022:43c7] type 01 class 0x060400 [ 3.679408] pci 0000:02:07.0: enabling Extended Tags [ 3.679668] pci 0000:02:07.0: PME# supported from D3hot D3cold [ 3.681502] pci 0000:01:00.2: PCI bridge to [bus 02-0a] [ 3.681510] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 3.681516] pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 3.682091] pci 0000:02:00.0: PCI bridge to [bus 03] [ 3.682671] pci 0000:02:01.0: PCI bridge to [bus 04] [ 3.683240] pci 0000:02:02.0: PCI bridge to [bus 05] [ 3.683819] pci 0000:02:03.0: PCI bridge to [bus 06] [ 3.684392] pci 0000:02:04.0: PCI bridge to [bus 07] [ 3.684675] pci 0000:02:05.0: PCI bridge to [bus 08] [ 3.685027] pci 0000:09:00.0: [10ec:c821] type 00 class 0x028000 [ 3.685056] pci 0000:09:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 3.685091] pci 0000:09:00.0: reg 0x18: [mem 0xfcc00000-0xfcc0ffff 64bit] [ 3.685567] pci 0000:09:00.0: supports D1 D2 [ 3.685570] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.686427] pci 0000:02:06.0: PCI bridge to [bus 09] [ 3.686434] pci 0000:02:06.0: bridge window [io 0xe000-0xefff] [ 3.686439] pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 3.686767] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000 [ 3.686797] pci 0000:0a:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 3.686836] pci 0000:0a:00.0: reg 0x18: [mem 0xfcb04000-0xfcb04fff 64bit] [ 3.686862] pci 0000:0a:00.0: reg 0x20: [mem 0xfcb00000-0xfcb03fff 64bit] [ 3.687312] pci 0000:0a:00.0: supports D1 D2 [ 3.687314] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.688181] pci 0000:02:07.0: PCI bridge to [bus 0a] [ 3.688188] pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] [ 3.688193] pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 3.688810] pci 0000:0b:00.0: [1c5c:1339] type 00 class 0x010802 [ 3.688830] pci 0000:0b:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit] [ 3.689078] pci 0000:0b:00.0: supports D1 [ 3.689080] pci 0000:0b:00.0: PME# supported from D0 D1 D3hot [ 3.689157] pci 0000:0b:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:02.2 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 3.689819] pci 0000:00:02.2: PCI bridge to [bus 0b] [ 3.689825] pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 3.691693] pci 0000:0c:00.0: [1002:1636] type 00 class 0x030000 [ 3.691707] pci 0000:0c:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 3.691717] pci 0000:0c:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] [ 3.691725] pci 0000:0c:00.0: reg 0x20: [io 0xf000-0xf0ff] [ 3.691733] pci 0000:0c:00.0: reg 0x24: [mem 0xfca00000-0xfca7ffff] [ 3.691744] pci 0000:0c:00.0: enabling Extended Tags [ 3.691887] pci 0000:0c:00.0: BAR 0: assigned to efifb [ 3.691937] pci 0000:0c:00.0: PME# supported from D1 D2 D3hot D3cold [ 3.691975] pci 0000:0c:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 3.693671] pci 0000:0c:00.1: [1002:1637] type 00 class 0x040300 [ 3.693682] pci 0000:0c:00.1: reg 0x10: [mem 0xfca88000-0xfca8bfff] [ 3.693706] pci 0000:0c:00.1: enabling Extended Tags [ 3.693878] pci 0000:0c:00.1: PME# supported from D1 D2 D3hot D3cold [ 3.695558] pci 0000:0c:00.2: [1022:15df] type 00 class 0x108000 [ 3.695574] pci 0000:0c:00.2: reg 0x18: [mem 0xfc900000-0xfc9fffff] [ 3.695587] pci 0000:0c:00.2: reg 0x24: [mem 0xfca8c000-0xfca8dfff] [ 3.695596] pci 0000:0c:00.2: enabling Extended Tags [ 3.697366] pci 0000:0c:00.3: [1022:1639] type 00 class 0x0c0330 [ 3.697382] pci 0000:0c:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] [ 3.697409] pci 0000:0c:00.3: enabling Extended Tags [ 3.697581] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold [ 3.699262] pci 0000:0c:00.4: [1022:1639] type 00 class 0x0c0330 [ 3.699276] pci 0000:0c:00.4: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit] [ 3.699303] pci 0000:0c:00.4: enabling Extended Tags [ 3.699470] pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold [ 3.701157] pci 0000:0c:00.6: [1022:15e3] type 00 class 0x040300 [ 3.701168] pci 0000:0c:00.6: reg 0x10: [mem 0xfca80000-0xfca87fff] [ 3.701192] pci 0000:0c:00.6: enabling Extended Tags [ 3.701357] pci 0000:0c:00.6: PME# supported from D0 D3hot D3cold [ 3.703159] pci 0000:00:08.1: PCI bridge to [bus 0c] [ 3.703165] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 3.703169] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] [ 3.703175] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 3.703911] pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601 [ 3.703936] pci 0000:0d:00.0: reg 0x24: [mem 0xfce01000-0xfce017ff] [ 3.703946] pci 0000:0d:00.0: enabling Extended Tags [ 3.704154] pci 0000:0d:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 3.705404] pci 0000:0d:00.1: [1022:7901] type 00 class 0x010601 [ 3.705429] pci 0000:0d:00.1: reg 0x24: [mem 0xfce00000-0xfce007ff] [ 3.705439] pci 0000:0d:00.1: enabling Extended Tags [ 3.706926] pci 0000:00:08.2: PCI bridge to [bus 0d] [ 3.706933] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 3.719188] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 3.720993] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 3.722685] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 3.724579] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 3.726367] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 3.727890] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 3.729400] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 3.730923] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 3.748921] ACPI: EC: interrupt unblocked [ 3.748925] ACPI: EC: event unblocked [ 3.748931] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.748933] ACPI: EC: GPE=0x3 [ 3.748945] ACPI: _SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 3.748962] ACPI: _SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 3.749531] iommu: Default domain type: Translated [ 3.750467] pci 0000:0c:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 3.750470] pci 0000:0c:00.0: vgaarb: bridge control possible [ 3.750473] pci 0000:0c:00.0: vgaarb: setting as boot device [ 3.750476] vgaarb: loaded [ 3.753243] SCSI subsystem initialized [ 3.753883] libata version 3.00 loaded. [ 3.753932] ACPI: bus type USB registered [ 3.753977] usbcore: registered new interface driver usbfs [ 3.754032] usbcore: registered new interface driver hub [ 3.754119] usbcore: registered new device driver usb [ 3.754432] pps_core: LinuxPPS API ver. 1 registered [ 3.754434] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 3.754483] PTP clock support registered [ 3.754579] EDAC MC: Ver: 3.0.0 [ 3.755028] Registered efivars operations [ 3.758940] NetLabel: Initializing [ 3.758943] NetLabel: domain hash size = 128 [ 3.758945] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 3.759115] NetLabel: unlabeled traffic allowed by default [ 3.759150] PCI: Using ACPI for IRQ routing [ 3.763418] PCI: pci_cache_line_size set to 64 bytes [ 3.763519] e820: reserve RAM buffer [mem 0x09c10000-0x0bffffff] [ 3.763535] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 3.763547] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 3.763559] e820: reserve RAM buffer [mem 0xb4c66018-0xb7ffffff] [ 3.763572] e820: reserve RAM buffer [mem 0xb5158000-0xb7ffffff] [ 3.763584] e820: reserve RAM buffer [mem 0xb6cf5000-0xb7ffffff] [ 3.763596] e820: reserve RAM buffer [mem 0xb8390000-0xbbffffff] [ 3.763609] e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff] [ 3.763871] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 3.763879] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 3.767071] clocksource: Switched to clocksource tsc-early [ 3.947809] VFS: Disk quotas dquot_6.6.0 [ 3.947952] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.949538] pnp: PnP ACPI init [ 3.952235] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 3.952300] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 3.954888] system 00:01: [mem 0x820000000-0x83fffffff window] has been reserved [ 3.954948] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.959738] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.977677] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 3.977699] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 3.977720] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 3.977743] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 3.977763] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 3.977783] system 00:03: [io 0x0a50-0x0a5f] has been reserved [ 3.977803] system 00:03: [io 0x0a60-0x0a6f] has been reserved [ 3.977823] system 00:03: [io 0x0a70-0x0a7f] has been reserved [ 3.977843] system 00:03: [io 0x0a80-0x0a8f] has been reserved [ 3.977863] system 00:03: [io 0x0a90-0x0b8e] has been reserved [ 3.977884] system 00:03: [io 0x0aa0-0x0aaf] has been reserved [ 3.977904] system 00:03: [io 0x0ab0-0x0abf] has been reserved [ 3.977924] system 00:03: [io 0x0ac0-0x0acf] has been reserved [ 3.977944] system 00:03: [io 0x0ad0-0x0adf] has been reserved [ 3.977979] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.985055] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 3.985077] system 00:04: [io 0x040b] has been reserved [ 3.985097] system 00:04: [io 0x04d6] has been reserved [ 3.985117] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 3.985137] system 00:04: [io 0x0c14] has been reserved [ 3.985157] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 3.985177] system 00:04: [io 0x0c52] has been reserved [ 3.985198] system 00:04: [io 0x0c6c] has been reserved [ 3.985221] system 00:04: [io 0x0c6f] has been reserved [ 3.985241] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 3.985261] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 3.985281] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 3.985302] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 3.985327] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 3.985347] system 00:04: [io 0x0800-0x089f] has been reserved [ 3.985367] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 3.985388] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 3.985408] system 00:04: [io 0x0900-0x090f] has been reserved [ 3.985428] system 00:04: [io 0x0910-0x091f] has been reserved [ 3.985460] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 3.985491] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 3.985513] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 3.985536] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 3.985566] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 3.985588] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 3.985611] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 3.985645] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.000921] pnp: PnP ACPI: found 5 devices [ 4.022230] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 4.022930] NET: Registered protocol family 2 [ 4.025189] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 4.025717] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 4.027463] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 4.027836] TCP: Hash tables configured (established 262144 bind 65536) [ 4.028821] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 4.029224] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 4.029555] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 4.030765] NET: Registered protocol family 1 [ 4.030807] NET: Registered protocol family 44 [ 4.030838] pci 0000:02:00.0: PCI bridge to [bus 03] [ 4.030860] pci 0000:02:01.0: PCI bridge to [bus 04] [ 4.030873] pci 0000:02:02.0: PCI bridge to [bus 05] [ 4.030885] pci 0000:02:03.0: PCI bridge to [bus 06] [ 4.030898] pci 0000:02:04.0: PCI bridge to [bus 07] [ 4.030910] pci 0000:02:05.0: PCI bridge to [bus 08] [ 4.030922] pci 0000:02:06.0: PCI bridge to [bus 09] [ 4.030927] pci 0000:02:06.0: bridge window [io 0xe000-0xefff] [ 4.030933] pci 0000:02:06.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 4.030944] pci 0000:02:07.0: PCI bridge to [bus 0a] [ 4.030947] pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] [ 4.030953] pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 4.030963] pci 0000:01:00.2: PCI bridge to [bus 02-0a] [ 4.030967] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 4.030973] pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 4.030982] pci 0000:00:02.1: PCI bridge to [bus 01-0a] [ 4.030985] pci 0000:00:02.1: bridge window [io 0xd000-0xefff] [ 4.030990] pci 0000:00:02.1: bridge window [mem 0xfcb00000-0xfcdfffff] [ 4.030997] pci 0000:00:02.2: PCI bridge to [bus 0b] [ 4.031001] pci 0000:00:02.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 4.031010] pci 0000:00:08.1: PCI bridge to [bus 0c] [ 4.031014] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 4.031018] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff] [ 4.031022] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 4.031029] pci 0000:00:08.2: PCI bridge to [bus 0d] [ 4.031033] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 4.031043] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 4.031047] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 4.031050] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 4.031053] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 4.031057] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 4.031060] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 4.031064] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window] [ 4.031067] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 4.031071] pci_bus 0000:01: resource 0 [io 0xd000-0xefff] [ 4.031074] pci_bus 0000:01: resource 1 [mem 0xfcb00000-0xfcdfffff] [ 4.031078] pci_bus 0000:02: resource 0 [io 0xd000-0xefff] [ 4.031081] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfccfffff] [ 4.031085] pci_bus 0000:09: resource 0 [io 0xe000-0xefff] [ 4.031088] pci_bus 0000:09: resource 1 [mem 0xfcc00000-0xfccfffff] [ 4.031092] pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff] [ 4.031095] pci_bus 0000:0a: resource 1 [mem 0xfcb00000-0xfcbfffff] [ 4.031098] pci_bus 0000:0b: resource 1 [mem 0xfcf00000-0xfcffffff] [ 4.031102] pci_bus 0000:0c: resource 0 [io 0xf000-0xffff] [ 4.031105] pci_bus 0000:0c: resource 1 [mem 0xfc700000-0xfcafffff] [ 4.031108] pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 4.031112] pci_bus 0000:0d: resource 1 [mem 0xfce00000-0xfcefffff] [ 4.035088] pci 0000:0c:00.1: D0 power state depends on 0000:0c:00.0 [ 4.039436] PCI: CLS 64 bytes, default 64 [ 4.039874] Trying to unpack rootfs image as initramfs... [ 4.303879] Freeing initrd memory: 8380K [ 4.437100] pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter. [ 4.437124] fbcon: Taking over console [ 4.438778] pci 0000:00:00.2: can't derive routing for PCI INT A [ 4.438783] pci 0000:00:00.2: PCI INT A: not connected [ 4.439066] pci 0000:00:01.0: Adding to iommu group 0 [ 4.439254] pci 0000:00:02.0: Adding to iommu group 1 [ 4.439416] pci 0000:00:02.1: Adding to iommu group 2 [ 4.439576] pci 0000:00:02.2: Adding to iommu group 3 [ 4.439749] pci 0000:00:08.0: Adding to iommu group 4 [ 4.439838] pci 0000:00:08.1: Adding to iommu group 4 [ 4.439927] pci 0000:00:08.2: Adding to iommu group 4 [ 4.440092] pci 0000:00:14.0: Adding to iommu group 5 [ 4.440181] pci 0000:00:14.3: Adding to iommu group 5 [ 4.440425] pci 0000:00:18.0: Adding to iommu group 6 [ 4.440520] pci 0000:00:18.1: Adding to iommu group 6 [ 4.440619] pci 0000:00:18.2: Adding to iommu group 6 [ 4.440708] pci 0000:00:18.3: Adding to iommu group 6 [ 4.440798] pci 0000:00:18.4: Adding to iommu group 6 [ 4.440887] pci 0000:00:18.5: Adding to iommu group 6 [ 4.440976] pci 0000:00:18.6: Adding to iommu group 6 [ 4.441068] pci 0000:00:18.7: Adding to iommu group 6 [ 4.441251] pci 0000:01:00.0: Adding to iommu group 7 [ 4.441342] pci 0000:01:00.1: Adding to iommu group 7 [ 4.441433] pci 0000:01:00.2: Adding to iommu group 7 [ 4.441513] pci 0000:02:00.0: Adding to iommu group 7 [ 4.441591] pci 0000:02:01.0: Adding to iommu group 7 [ 4.441668] pci 0000:02:02.0: Adding to iommu group 7 [ 4.441752] pci 0000:02:03.0: Adding to iommu group 7 [ 4.441842] pci 0000:02:04.0: Adding to iommu group 7 [ 4.441919] pci 0000:02:05.0: Adding to iommu group 7 [ 4.442006] pci 0000:02:06.0: Adding to iommu group 7 [ 4.442089] pci 0000:02:07.0: Adding to iommu group 7 [ 4.442167] pci 0000:09:00.0: Adding to iommu group 7 [ 4.442254] pci 0000:0a:00.0: Adding to iommu group 7 [ 4.442401] pci 0000:0b:00.0: Adding to iommu group 8 [ 4.442495] pci 0000:0c:00.0: Adding to iommu group 4 [ 4.442579] pci 0000:0c:00.1: Adding to iommu group 4 [ 4.442657] pci 0000:0c:00.2: Adding to iommu group 4 [ 4.442736] pci 0000:0c:00.3: Adding to iommu group 4 [ 4.442815] pci 0000:0c:00.4: Adding to iommu group 4 [ 4.442901] pci 0000:0c:00.6: Adding to iommu group 4 [ 4.442980] pci 0000:0d:00.0: Adding to iommu group 4 [ 4.443062] pci 0000:0d:00.1: Adding to iommu group 4 [ 4.485919] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 4.485927] pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade): [ 4.485930] PPR X2APIC NX GT IA GA PC GA_vAPIC [ 4.485941] AMD-Vi: Interrupt remapping enabled [ 4.485943] AMD-Vi: Virtual APIC enabled [ 4.485944] AMD-Vi: X2APIC enabled [ 4.486507] AMD-Vi: Lazy IO/TLB flushing enabled [ 4.486638] amd_uncore: 4 amd_df counters detected [ 4.486658] amd_uncore: 6 amd_l3 counters detected [ 4.487370] LVT offset 0 assigned for vector 0x400 [ 4.487665] perf: AMD IBS detected (0x000003ff) [ 4.493516] check: Scanning for low memory corruption every 60 seconds [ 4.501303] Initialise system trusted keyrings [ 4.501370] Key type blacklist registered [ 4.501686] workingset: timestamp_bits=41 max_order=23 bucket_order=0 [ 4.535407] zbud: loaded [ 4.543286] Key type asymmetric registered [ 4.543290] Asymmetric key parser 'x509' registered [ 4.543383] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 4.543676] io scheduler mq-deadline registered [ 4.543680] io scheduler kyber registered [ 4.544306] io scheduler bfq registered [ 4.548330] pcieport 0000:00:02.1: PME: Signaling with IRQ 26 [ 4.549376] pcieport 0000:00:02.2: PME: Signaling with IRQ 27 [ 4.550413] pcieport 0000:00:08.1: PME: Signaling with IRQ 28 [ 4.552624] pcieport 0000:00:08.2: PME: Signaling with IRQ 29 [ 4.566880] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.567202] efifb: probing for efifb [ 4.567582] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k [ 4.567585] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 4.567588] efifb: scrolling: redraw [ 4.567589] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 4.568816] Console: switching to colour frame buffer device 128x48 [ 4.573826] fb0: EFI VGA frame buffer device [ 4.574618] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 4.575001] ACPI: button: Power Button [PWRB] [ 4.575507] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 4.577445] ACPI: button: Power Button [PWRF] [ 4.578214] Monitor-Mwait will be used to enter C-1 state [ 4.578264] ACPI: _PR_.C000: Found 3 idle states [ 4.579833] ACPI: _PR_.C002: Found 3 idle states [ 4.581513] ACPI: _PR_.C004: Found 3 idle states [ 4.583007] ACPI: _PR_.C006: Found 3 idle states [ 4.584708] ACPI: _PR_.C001: Found 3 idle states [ 4.586254] ACPI: _PR_.C003: Found 3 idle states [ 4.587838] ACPI: _PR_.C005: Found 3 idle states [ 4.589535] ACPI: _PR_.C007: Found 3 idle states [ 4.606622] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.606629] ACPI: thermal: Thermal Zone [HPTZ] (30 C) [ 4.608252] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.632735] Non-volatile memory driver v1.3 [ 4.632741] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]> [ 4.645325] nvme nvme0: pci function 0000:0b:00.0 [ 4.645645] ahci 0000:01:00.1: version 3.0 [ 4.645660] ahci 0000:01:00.1: enabling device (0100 -> 0102) [ 4.647511] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 4.647582] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 4.647587] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 4.651792] ================================================================== [ 4.651913] BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb (./include/linux/swiotlb.h:114 drivers/iommu/dma-iommu.c:510) [ 4.652031] Read of size 8 at addr ffff8887c008f000 by task swapper/0/0
[ 4.652162] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug-00033-g167e3e00e2be #1 [ 4.652168] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 4.652172] Call Trace: [ 4.652176] <IRQ> [ 4.652180] dump_stack (lib/dump_stack.c:122) [ 4.652189] print_address_description.constprop.0 (mm/kasan/report.c:233) [ 4.652196] ? __iommu_dma_unmap_swiotlb (./include/linux/swiotlb.h:114 drivers/iommu/dma-iommu.c:510) [ 4.652202] kasan_report.cold (mm/kasan/report.c:400 mm/kasan/report.c:416) [ 4.652211] ? __iommu_dma_unmap_swiotlb (./include/linux/swiotlb.h:114 drivers/iommu/dma-iommu.c:510) [ 4.652217] __iommu_dma_unmap_swiotlb (./include/linux/swiotlb.h:114 drivers/iommu/dma-iommu.c:510) [ 4.652224] nvme_pci_complete_rq (drivers/nvme/host/pci.c:971) [ 4.652232] blk_complete_reqs (block/blk-mq.c:575 (discriminator 6)) [ 4.652239] __do_softirq (./arch/x86/include/asm/jump_label.h:25 ./include/linux/jump_label.h:200 ./include/trace/events/irq.h:142 kernel/softirq.c:346) [ 4.652247] irq_exit_rcu (kernel/softirq.c:221 kernel/softirq.c:422 kernel/softirq.c:434) [ 4.652254] common_interrupt (arch/x86/kernel/irq.c:240 (discriminator 14)) [ 4.652261] </IRQ> [ 4.652264] asm_common_interrupt (./arch/x86/include/asm/idtentry.h:623) [ 4.652270] RIP: 0010:cpuidle_enter_state (drivers/cpuidle/cpuidle.c:259) [ 4.652277] Code: 3d 14 09 b7 51 e8 57 a6 49 ff 49 89 c5 0f 1f 44 00 00 31 ff e8 18 bb 49 ff 80 3c 24 00 0f 85 aa 02 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 39 02 00 00 49 63 ee 48 8d 44 6d 00 48 8d 44 85 00 All code ======== 0: 3d 14 09 b7 51 cmp $0x51b70914,%eax 5: e8 57 a6 49 ff call 0xffffffffff49a661 a: 49 89 c5 mov %rax,%r13 d: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) 12: 31 ff xor %edi,%edi 14: e8 18 bb 49 ff call 0xffffffffff49bb31 19: 80 3c 24 00 cmpb $0x0,(%rsp) 1d: 0f 85 aa 02 00 00 jne 0x2cd 23: fb sti 24: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1) 2a:* 45 85 f6 test %r14d,%r14d <-- trapping instruction 2d: 0f 88 39 02 00 00 js 0x26c 33: 49 63 ee movslq %r14d,%rbp 36: 48 8d 44 6d 00 lea 0x0(%rbp,%rbp,2),%rax 3b: 48 8d 44 85 00 lea 0x0(%rbp,%rax,4),%rax
Code starting with the faulting instruction
===========================================
0: 45 85 f6 test %r14d,%r14d 3: 0f 88 39 02 00 00 js 0x242 9: 49 63 ee movslq %r14d,%rbp c: 48 8d 44 6d 00 lea 0x0(%rbp,%rbp,2),%rax 11: 48 8d 44 85 00 lea 0x0(%rbp,%rax,4),%rax [ 4.652283] RSP: 0018:ffffffffaf807df0 EFLAGS: 00000246 [ 4.652289] RAX: 0000000000000000 RBX: ffff88810bd09000 RCX: ffffffffad944885 [ 4.652293] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8887c3235648 [ 4.652297] RBP: 0000000000000003 R08: 0000000000000001 R09: ffff8887c32356d7 [ 4.652300] R10: ffffed10f8646ada R11: 0000000000000001 R12: ffffffffafc5bfc0 [ 4.652304] R13: 0000000115446cbb R14: 0000000000000003 R15: ffffffffafc5c150 [ 4.652309] ? sched_idle_set_state (kernel/sched/sched.h:1981 kernel/sched/idle.c:22) [ 4.652317] ? tick_nohz_idle_stop_tick (kernel/time/tick-sched.c:1029 kernel/time/tick-sched.c:1043) [ 4.652325] cpuidle_enter (drivers/cpuidle/cpuidle.c:353) [ 4.652331] do_idle (kernel/sched/idle.c:158 kernel/sched/idle.c:239 kernel/sched/idle.c:300) [ 4.652338] ? arch_cpu_idle_exit+0x40/0x40 [ 4.652345] cpu_startup_entry (kernel/sched/idle.c:396 (discriminator 1)) [ 4.652350] start_kernel (init/main.c:1066) [ 4.652359] secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:283)
[ 4.652395] The buggy address belongs to the page: [ 4.652456] page:00000000a3938bc3 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7c008f [ 4.652461] flags: 0x2ffff0000000000() [ 4.652466] raw: 02ffff0000000000 ffffea001f0023c8 ffffea001f0023c8 0000000000000000 [ 4.652470] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 4.652472] page dumped because: kasan: bad access detected
[ 4.652491] Memory state around the buggy address: [ 4.652547] ffff8887c008ef00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652621] ffff8887c008ef80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652695] >ffff8887c008f000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652768] ^ [ 4.652803] ffff8887c008f080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652877] ffff8887c008f100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 4.652950] ================================================================== [ 4.653029] Disabling lock debugging due to kernel taint [ 4.653309] nvme nvme0: missing or invalid SUBNQN field. [ 4.663105] nvme nvme0: 16/0/0 default/read/poll queues [ 4.668311] scsi host0: ahci [ 4.669899] nvme0n1: p1 p2 [ 4.670702] scsi host1: ahci [ 4.672616] scsi host2: ahci [ 4.674521] scsi host3: ahci [ 4.676781] scsi host4: ahci [ 4.678791] scsi host5: ahci [ 4.680663] scsi host6: ahci [ 4.682714] scsi host7: ahci [ 4.683697] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 44 [ 4.683702] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 44 [ 4.683707] ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 44 [ 4.683710] ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 44 [ 4.683714] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 44 [ 4.683718] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 44 [ 4.683722] ata7: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80400 irq 44 [ 4.683726] ata8: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80480 irq 44 [ 4.684113] ahci 0000:0d:00.0: enabling device (0100 -> 0102) [ 4.686333] ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 4.686342] ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 4.688739] scsi host8: ahci [ 4.689732] ata9: SATA max UDMA/133 abar m2048@0xfce01000 port 0xfce01100 irq 62 [ 4.689877] ahci 0000:0d:00.1: enabling device (0100 -> 0102) [ 4.691535] ahci 0000:0d:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 4.691544] ahci 0000:0d:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 4.694012] scsi host9: ahci [ 4.695026] ata10: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 64 [ 4.695247] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.695279] ehci-pci: EHCI PCI platform driver [ 4.695395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.695415] ohci-pci: OHCI PCI platform driver [ 4.695512] uhci_hcd: USB Universal Host Controller Interface driver [ 4.696210] usbcore: registered new interface driver usbserial_generic [ 4.696264] usbserial: USB Serial support registered for generic [ 4.697317] rtc_cmos 00:02: RTC can wake from S4 [ 4.699142] rtc_cmos 00:02: registered as rtc0 [ 4.699426] rtc_cmos 00:02: setting system clock to 2021-07-05T18:01:47 UTC (1625508107) [ 4.699656] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.700290] ledtrig-cpu: registered to indicate activity on CPUs [ 4.705912] hid: raw HID events driver (C) Jiri Kosina [ 4.706429] drop_monitor: Initializing network drop monitor service [ 4.706594] Initializing XFRM netlink socket [ 4.708814] NET: Registered protocol family 10 [ 4.733033] Segment Routing with IPv6 [ 4.733041] RPL Segment Routing with IPv6 [ 4.733175] NET: Registered protocol family 17 [ 4.744516] microcode: CPU0: patch_level=0x08600106 [ 4.744563] microcode: CPU1: patch_level=0x08600106 [ 4.744657] microcode: CPU2: patch_level=0x08600106 [ 4.744739] microcode: CPU3: patch_level=0x08600106 [ 4.744804] microcode: CPU4: patch_level=0x08600106 [ 4.744848] microcode: CPU5: patch_level=0x08600106 [ 4.744916] microcode: CPU6: patch_level=0x08600106 [ 4.744975] microcode: CPU7: patch_level=0x08600106 [ 4.745002] microcode: Microcode Update Driver: v2.2. [ 4.745820] resctrl: L3 allocation detected [ 4.745827] resctrl: L3DATA allocation detected [ 4.745829] resctrl: L3CODE allocation detected [ 4.745830] resctrl: MB allocation detected [ 4.745832] resctrl: L3 monitoring detected [ 4.745838] IPI shorthand broadcast: enabled [ 4.745984] sched_clock: Marking stable (4739676488, 6007714)->(4747676129, -1991927) [ 4.746812] registered taskstats version 1 [ 4.746922] Loading compiled-in X.509 certificates [ 4.757340] Loaded X.509 cert 'Build time autogenerated kernel key: 32cf4ae6b69274291395e11399683edef2a4e147' [ 4.762638] zswap: loaded using pool lz4/z3fold [ 4.764606] Key type ._fscrypt registered [ 4.764612] Key type .fscrypt registered [ 4.764614] Key type fscrypt-provisioning registered [ 4.776597] PM: Magic number: 13:252:38 [ 4.776765] memory memory207: hash matches [ 4.776798] memory memory74: hash matches [ 4.778951] RAS: Correctable Errors collector initialized. [ 4.995881] ata1: SATA link down (SStatus 0 SControl 300) [ 5.000972] ata9: SATA link down (SStatus 0 SControl 300) [ 5.005458] ata10: SATA link down (SStatus 0 SControl 300) [ 5.310074] ata2: SATA link down (SStatus 0 SControl 300) [ 5.490688] tsc: Refined TSC clocksource calibration: 3819.727 MHz [ 5.490713] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6e1e4508946, max_idle_ns: 881590469268 ns [ 5.490821] clocksource: Switched to clocksource tsc [ 5.622021] ata3: SATA link down (SStatus 0 SControl 300) [ 5.932590] ata4: SATA link down (SStatus 0 SControl 300) [ 6.245698] ata5: SATA link down (SStatus 0 SControl 300) [ 6.559773] ata6: SATA link down (SStatus 0 SControl 300) [ 6.872755] ata7: SATA link down (SStatus 0 SControl 300) [ 7.185687] ata8: SATA link down (SStatus 0 SControl 300) [ 7.200470] Freeing unused decrypted memory: 2036K [ 7.201233] Freeing unused kernel image (initmem) memory: 2012K [ 7.201243] Write protecting the kernel read-only data: 32768k [ 7.202524] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 7.203212] Freeing unused kernel image (rodata/data gap) memory: 1768K [ 7.261659] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 7.261671] rodata_test: all tests were successful [ 7.261705] Run /init as init process [ 7.261708] with arguments: [ 7.261710] /init [ 7.261712] with environment: [ 7.261714] HOME=/ [ 7.261716] TERM=linux [ 8.072610] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 8.072718] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 8.128723] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 8.136551] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 8.136562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.136567] usb usb1: Product: xHCI Host Controller [ 8.136572] usb usb1: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.136576] usb usb1: SerialNumber: 0000:01:00.0 [ 8.139731] hub 1-0:1.0: USB hub found [ 8.139944] hub 1-0:1.0: 14 ports detected [ 8.155361] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 8.155411] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 8.155437] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 8.155750] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.156512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 [ 8.156521] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.156525] usb usb2: Product: xHCI Host Controller [ 8.156528] usb usb2: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.156530] usb usb2: SerialNumber: 0000:01:00.0 [ 8.158456] hub 2-0:1.0: USB hub found [ 8.158657] hub 2-0:1.0: 8 ports detected [ 8.171454] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 8.171543] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 [ 8.172082] xhci_hcd 0000:0c:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 [ 8.178578] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 8.178589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.178594] usb usb3: Product: xHCI Host Controller [ 8.178598] usb usb3: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.178602] usb usb3: SerialNumber: 0000:0c:00.3 [ 8.181189] hub 3-0:1.0: USB hub found [ 8.181388] hub 3-0:1.0: 4 ports detected [ 8.185965] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 8.186032] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 [ 8.186059] xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 8.186366] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.187099] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 [ 8.187108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.187113] usb usb4: Product: xHCI Host Controller [ 8.187117] usb usb4: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.187122] usb usb4: SerialNumber: 0000:0c:00.3 [ 8.189404] hub 4-0:1.0: USB hub found [ 8.189539] hub 4-0:1.0: 2 ports detected [ 8.192958] xhci_hcd 0000:0c:00.4: xHCI Host Controller [ 8.193016] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 5 [ 8.193395] xhci_hcd 0000:0c:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 [ 8.197879] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 8.197887] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.197890] usb usb5: Product: xHCI Host Controller [ 8.197893] usb usb5: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.197895] usb usb5: SerialNumber: 0000:0c:00.4 [ 8.199515] hub 5-0:1.0: USB hub found [ 8.199659] hub 5-0:1.0: 4 ports detected [ 8.202842] xhci_hcd 0000:0c:00.4: xHCI Host Controller [ 8.202887] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 6 [ 8.202913] xhci_hcd 0000:0c:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 8.203133] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.203610] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 [ 8.203614] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.203618] usb usb6: Product: xHCI Host Controller [ 8.203620] usb usb6: Manufacturer: Linux 5.12.0-rc3-debug-00033-g167e3e00e2be xhci-hcd [ 8.203623] usb usb6: SerialNumber: 0000:0c:00.4 [ 8.205252] hub 6-0:1.0: USB hub found [ 8.205385] hub 6-0:1.0: 2 ports detected [ 8.483770] usb 1-11: new full-speed USB device number 2 using xhci_hcd [ 8.616313] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled [ 8.629895] XFS (nvme0n1p2): Mounting V5 Filesystem [ 8.640814] XFS (nvme0n1p2): Ending clean mount [ 8.643784] xfs filesystem being mounted at /new_root supports timestamps until 2038 (0x7fffffff) [ 8.701705] random: fast init done [ 8.850769] random: crng init done [ 8.850799] systemd[1]: Successfully credited entropy passed from boot loader. [ 8.854073] systemd[1]: systemd 248.3-2-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 8.870978] systemd[1]: Detected architecture x86-64. [ 8.874172] systemd[1]: Hostname set to <hp-4300G>. [ 8.883148] usb 1-11: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 8.883160] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.883165] usb 1-11: Product: USB Receiver [ 8.883169] usb 1-11: Manufacturer: Logitech [ 8.964795] systemd-fstab-generator[252]: Mount point is not a valid path, ignoring. [ 8.965686] systemd-fstab-generator[252]: Mount point is not a valid path, ignoring. [ 9.023787] usb 1-12: new full-speed USB device number 3 using xhci_hcd [ 9.133143] systemd[1]: Queued start job for default target Graphical Interface. [ 9.141522] systemd[1]: Created slice system-getty.slice. [ 9.143519] systemd[1]: Created slice system-modprobe.slice. [ 9.148031] systemd[1]: Created slice User and Session Slice. [ 9.148561] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.149038] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.150164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.150701] systemd[1]: Reached target Local Encrypted Volumes. [ 9.150901] systemd[1]: Reached target Login Prompts. [ 9.151100] systemd[1]: Reached target Paths. [ 9.151278] systemd[1]: Reached target Remote File Systems. [ 9.151475] systemd[1]: Reached target Slices. [ 9.151661] systemd[1]: Reached target Swap. [ 9.151839] systemd[1]: Reached target Local Verity Integrity Protected Volumes. [ 9.153881] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 9.157470] systemd[1]: Listening on Process Core Dump Socket. [ 9.159900] systemd[1]: Listening on Journal Audit Socket. [ 9.162031] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.164219] systemd[1]: Listening on Journal Socket. [ 9.166260] systemd[1]: Listening on Network Service Netlink Socket. [ 9.169746] systemd[1]: Listening on udev Control Socket. [ 9.171892] systemd[1]: Listening on udev Kernel Socket. [ 9.178783] systemd[1]: Mounting Huge Pages File System... [ 9.186001] systemd[1]: Mounting POSIX Message Queue File System... [ 9.192864] systemd[1]: Mounting Kernel Debug File System... [ 9.199803] systemd[1]: Mounting Kernel Trace File System... [ 9.207150] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 9.220054] systemd[1]: Starting Load Kernel Module configfs... [ 9.227187] systemd[1]: Starting Load Kernel Module drm... [ 9.234146] systemd[1]: Starting Load Kernel Module fuse... [ 9.240238] Linux agpgart interface v0.103 [ 9.242093] systemd[1]: Starting Set Up Additional Binary Formats... [ 9.243933] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 9.258253] fuse: init (API version 7.33) [ 9.258750] systemd[1]: Starting Journal Service... [ 9.269031] systemd[1]: Starting Load Kernel Modules... [ 9.275818] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.278268] systemd[1]: Condition check resulted in Repartition Root Disk being skipped. [ 9.285440] systemd[1]: Starting Coldplug All udev Devices... [ 9.289436] Asymmetric key parser 'pkcs8' registered [ 9.295407] systemd[1]: Mounted Huge Pages File System. [ 9.297675] systemd[1]: Mounted POSIX Message Queue File System. [ 9.299077] XFS: attr2 mount option is deprecated. [ 9.299875] systemd[1]: Mounted Kernel Debug File System. [ 9.302121] systemd[1]: Mounted Kernel Trace File System. [ 9.302305] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 9.307207] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 9.309211] audit: type=1130 audit(1625508112.104:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.310701] systemd[1]: [email protected]: Deactivated successfully. [ 9.312189] systemd[1]: Finished Load Kernel Module configfs. [ 9.314011] audit: type=1130 audit(1625508112.111:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.314063] audit: type=1131 audit(1625508112.111:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.315399] systemd[1]: [email protected]: Deactivated successfully. [ 9.316866] systemd[1]: Finished Load Kernel Module drm. [ 9.319018] audit: type=1130 audit(1625508112.114:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.319063] audit: type=1131 audit(1625508112.114:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.320369] systemd[1]: [email protected]: Deactivated successfully. [ 9.322053] systemd[1]: Finished Load Kernel Module fuse. [ 9.323928] audit: type=1130 audit(1625508112.121:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.323969] audit: type=1131 audit(1625508112.121:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.325885] systemd[1]: Finished Load Kernel Modules. [ 9.327726] audit: type=1130 audit(1625508112.124:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.329640] systemd[1]: Finished Remount Root and Kernel File Systems. [ 9.331465] audit: type=1130 audit(1625508112.128:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.331966] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 268 (systemd-binfmt) [ 9.334658] usb 1-12: New USB device found, idVendor=0bda, idProduct=b00a, bcdDevice= 1.10 [ 9.334669] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.334673] usb 1-12: Product: Bluetooth Radio [ 9.334677] usb 1-12: Manufacturer: Realtek [ 9.334681] usb 1-12: SerialNumber: 00e04c000001 [ 9.337615] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 9.345171] systemd[1]: Mounting FUSE Control File System... [ 9.352671] systemd[1]: Mounting Kernel Configuration File System... [ 9.354660] systemd[1]: Condition check resulted in First Boot Wizard being skipped. [ 9.356762] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 9.362335] systemd[1]: Starting Load/Save Random Seed... [ 9.370337] systemd[1]: Starting Apply Kernel Variables... [ 9.377555] systemd[1]: Starting Create System Users... [ 9.384837] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 9.388928] systemd[1]: Mounted FUSE Control File System. [ 9.391926] systemd[1]: Mounted Kernel Configuration File System. [ 9.396765] systemd[1]: Finished Load/Save Random Seed. [ 9.400536] audit: type=1130 audit(1625508112.194:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.407538] systemd[1]: Finished Apply Kernel Variables. [ 9.411712] systemd[1]: Finished Set Up Additional Binary Formats. [ 9.416339] systemd[1]: Finished Create System Users. [ 9.418688] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 9.424186] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.480449] systemd[1]: Finished Create Static Device Nodes in /dev. [ 9.482506] systemd[1]: Reached target Local File Systems (Pre). [ 9.489210] systemd[1]: Mounting /tmp... [ 9.491124] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped. [ 9.503225] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 9.508551] systemd[1]: Mounted /tmp. [ 9.573272] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 9.588922] systemd[1]: Starting Network Service... [ 9.638950] systemd[1]: Started Journal Service. [ 9.664886] systemd-journald[269]: Received client request to flush runtime journal. [ 9.759611] Bluetooth: Core ver 2.22 [ 9.759775] NET: Registered protocol family 31 [ 9.759778] Bluetooth: HCI device and connection manager initialized [ 9.759794] Bluetooth: HCI socket layer initialized [ 9.759807] Bluetooth: L2CAP socket layer initialized [ 9.759838] Bluetooth: SCO socket layer initialized [ 9.784432] usbcore: registered new interface driver btusb [ 9.786588] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821 [ 9.789596] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 9.789666] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin [ 9.793321] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin [ 9.794035] Bluetooth: hci0: RTL: cfg_sz 10, total sz 31990 [ 10.052152] acpi_cpufreq: overriding BIOS provided _PSD data [ 10.063914] acpi-tad ACPI000E:00: Missing _PRW [ 10.241179] ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 10.264286] acpi device:1e: registered as cooling_device8 [ 10.269015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input2 [ 10.319302] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 10.358026] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 10.358037] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 10.358941] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 10.362274] ccp 0000:0c:00.2: enabling device (0100 -> 0102) [ 10.364925] ccp 0000:0c:00.2: ccp: unable to access the device: you might be running a broken BIOS. [ 10.375365] ccp 0000:0c:00.2: tee enabled [ 10.375376] ccp 0000:0c:00.2: psp enabled [ 10.394306] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 10.395169] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 10.396264] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 10.471471] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 10.500876] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 10.500885] RAPL PMU: hw unit of domain package 2^-16 Joules [ 10.533106] cryptd: max_cpu_qlen set to 1000 [ 10.572803] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.0/0003:046D:C534.0001/input/input4 [ 10.601442] libphy: r8169: probed [ 10.603871] r8169 0000:0a:00.0 eth0: RTL8168h/8111h, 00:68:eb:ad:98:43, XID 541, IRQ 91 [ 10.603884] r8169 0000:0a:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 10.618131] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.632919] AVX2 version of gcm_enc/dec engaged. [ 10.633000] AES CTR mode by8 optimization enabled [ 10.633757] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 [ 10.642569] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.643042] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 10.643062] cfg80211: failed to load regulatory.db [ 10.676986] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input5 [ 10.680342] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input6 [ 10.729484] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 10.738574] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/input/input7 [ 10.740269] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 [ 10.740698] usbcore: registered new interface driver usbhid [ 10.740702] usbhid: USB HID core driver [ 10.878631] snd_hda_intel 0000:0c:00.1: enabling device (0100 -> 0102) [ 10.879924] snd_hda_intel 0000:0c:00.1: Handle vga_switcheroo audio client [ 10.880070] Bluetooth: hci0: RTL: fw version 0x829a7644 [ 10.893377] snd_hda_intel 0000:0c:00.6: enabling device (0100 -> 0102) [ 10.918940] irq 7: nobody cared (try booting with the "irqpoll" option) [ 10.921972] CPU: 4 PID: 363 Comm: systemd-tmpfile Tainted: G B 5.12.0-rc3-debug-00033-g167e3e00e2be #1 [ 10.921980] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 10.921984] Call Trace: [ 10.921987] <IRQ> [ 10.921990] dump_stack (lib/dump_stack.c:122) [ 10.922002] __report_bad_irq (kernel/irq/spurious.c:214) [ 10.922011] note_interrupt.cold (kernel/irq/spurious.c:419) [ 10.922019] ? add_interrupt_randomness (drivers/char/random.c:1290 (discriminator 1)) [ 10.922027] handle_irq_event (kernel/irq/handle.c:201 kernel/irq/handle.c:213) [ 10.922036] ? handle_irq_event_percpu (kernel/irq/handle.c:206) [ 10.922043] ? _raw_spin_lock (./arch/x86/include/asm/atomic.h:202 ./include/asm-generic/atomic-instrumented.h:707 ./include/asm-generic/qspinlock.h:82 ./include/linux/spinlock.h:183 ./include/linux/spinlock_api_smp.h:143 kernel/locking/spinlock.c:151) [ 10.922050] ? _raw_spin_lock_bh (kernel/locking/spinlock.c:150) [ 10.922057] handle_fasteoi_irq (kernel/irq/chip.c:661 kernel/irq/chip.c:716) [ 10.922065] __common_interrupt (arch/x86/kernel/irq.c:264 (discriminator 22)) [ 10.922073] common_interrupt (arch/x86/kernel/irq.c:240 (discriminator 14)) [ 10.922081] </IRQ> [ 10.922084] asm_common_interrupt (./arch/x86/include/asm/idtentry.h:623) [ 10.922090] RIP: 0010:file_ra_state_init (mm/readahead.c:35) [ 10.922098] Code: 00 48 0f 44 f0 48 89 35 a9 cd bc 02 e8 d4 d4 e4 ff e9 8f fe ff ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 <41> 54 55 48 89 f5 53 48 89 fb 48 89 f7 e8 a9 ec 0c 00 48 8b 6d 00
All code
========
0: 00 48 0f add %cl,0xf(%rax)
3: 44 rex.R
4: f0 48 89 35 a9 cd bc lock mov %rsi,0x2bccda9(%rip) # 0x2bccdb5
b: 02
c: e8 d4 d4 e4 ff call 0xffffffffffe4d4e5 11: e9 8f fe ff ff jmp 0xfffffffffffffea5 16: cc int3 17: cc int3 18: cc int3 19: cc int3 1a: cc int3 1b: cc int3 1c: cc int3 1d: cc int3 1e: cc int3 1f: cc int3 20: cc int3 21: cc int3 22: cc int3 23: cc int3 24: cc int3 25: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) 2a:* 41 54 push %r12 <-- trapping instruction 2c: 55 push %rbp 2d: 48 89 f5 mov %rsi,%rbp 30: 53 push %rbx 31: 48 89 fb mov %rdi,%rbx 34: 48 89 f7 mov %rsi,%rdi 37: e8 a9 ec 0c 00 call 0xcece5 3c: 48 8b 6d 00 mov 0x0(%rbp),%rbp
Code starting with the faulting instruction
===========================================
0: 41 54 push %r12 2: 55 push %rbp 3: 48 89 f5 mov %rsi,%rbp 6: 53 push %rbx 7: 48 89 fb mov %rdi,%rbx a: 48 89 f7 mov %rsi,%rdi d: e8 a9 ec 0c 00 call 0xcecbb 12: 48 8b 6d 00 mov 0x0(%rbp),%rbp [ 10.922104] RSP: 0018:ffffc90000fcf9e8 EFLAGS: 00000246 [ 10.922111] RAX: 0000000000000000 RBX: ffff88811ef2e5c0 RCX: ffffffffadca322f [ 10.922115] RDX: dffffc0000000000 RSI: ffff8881258b5ae8 RDI: ffff88811ef2e658 [ 10.922120] RBP: ffff8881258b5970 R08: ffffffffadca3202 R09: ffff8881258b5ad7 [ 10.922124] R10: ffffed1024b16b5a R11: 0000000000000001 R12: 0000000000000000 [ 10.922128] R13: ffff8881258b5970 R14: ffff88811ef2e604 R15: ffff88811ef2e600 [ 10.922134] ? do_dentry_open (fs/open.c:841) [ 10.922140] ? do_dentry_open (fs/open.c:843) [ 10.922148] do_dentry_open (fs/open.c:846) WARNING! Modules path isn't set, but is needed to parse this symbol [ 10.922155] ? xfs_extent_busy_ag_cmp+0x50/0x50 xfs [ 10.922565] path_openat (fs/namei.c:3365 fs/namei.c:3498) [ 10.922576] ? path_lookupat (fs/namei.c:3480) [ 10.922583] ? rwsem_down_write_slowpath (kernel/locking/rwsem.c:1447) [ 10.922592] ? handle_mm_fault (mm/memory.c:4501 mm/memory.c:4565) [ 10.922599] ? do_user_addr_fault (./arch/x86/include/asm/jump_label.h:25 ./include/linux/jump_label.h:200 ./include/linux/mmap_lock.h:41 ./include/linux/mmap_lock.h:144 arch/x86/mm/fault.c:1414) [ 10.922607] do_filp_open (fs/namei.c:3525) [ 10.922615] ? may_open_dev (fs/namei.c:3519) [ 10.922624] ? __fdget (fs/file.c:201) [ 10.922630] ? _raw_spin_lock (./arch/x86/include/asm/atomic.h:202 ./include/asm-generic/atomic-instrumented.h:707 ./include/asm-generic/qspinlock.h:82 ./include/linux/spinlock.h:183 ./include/linux/spinlock_api_smp.h:143 kernel/locking/spinlock.c:151) [ 10.922637] ? _find_next_bit.constprop.0 (lib/find_bit.c:41) [ 10.922645] ? alloc_fd (fs/file.c:526 (discriminator 13)) [ 10.922651] do_sys_openat2 (fs/open.c:1187) [ 10.922658] ? build_open_flags (fs/open.c:1173) [ 10.922666] __x64_sys_openat (fs/open.c:1214) [ 10.922672] ? __x64_sys_open (fs/open.c:1214) [ 10.922679] ? ktime_get_coarse_real_ts64 (kernel/time/timekeeping.c:2230 (discriminator 3)) [ 10.922687] do_syscall_64 (arch/x86/entry/common.c:46) [ 10.922694] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:112) [ 10.922701] RIP: 0033:0x7f5dca6be8cc [ 10.922706] Code: 24 18 31 c0 41 83 e2 40 75 44 89 f0 25 00 00 41 00 3d 00 00 41 00 74 36 44 89 c2 4c 89 ce bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 48 8b 54 24 18 64 48 2b 14 25 28 00 00 00 All code ======== 0: 24 18 and $0x18,%al 2: 31 c0 xor %eax,%eax 4: 41 83 e2 40 and $0x40,%r10d 8: 75 44 jne 0x4e a: 89 f0 mov %esi,%eax c: 25 00 00 41 00 and $0x410000,%eax 11: 3d 00 00 41 00 cmp $0x410000,%eax 16: 74 36 je 0x4e 18: 44 89 c2 mov %r8d,%edx 1b: 4c 89 ce mov %r9,%rsi 1e: bf 9c ff ff ff mov $0xffffff9c,%edi 23: b8 01 01 00 00 mov $0x101,%eax 28: 0f 05 syscall 2a:* 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax <-- trapping instruction 30: 77 44 ja 0x76 32: 48 8b 54 24 18 mov 0x18(%rsp),%rdx 37: 64 48 2b 14 25 28 00 sub %fs:0x28,%rdx
3e: 00 00
Code starting with the faulting instruction
===========================================
0: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax 6: 77 44 ja 0x4c 8: 48 8b 54 24 18 mov 0x18(%rsp),%rdx d: 64 48 2b 14 25 28 00 sub %fs:0x28,%rdx 14: 00 00 [ 10.922712] RSP: 002b:00007ffef51fa140 EFLAGS: 00000287 ORIG_RAX: 0000000000000101 [ 10.922718] RAX: ffffffffffffffda RBX: 00005598f2a69ad0 RCX: 00007f5dca6be8cc [ 10.922723] RDX: 0000000000080000 RSI: 00007f5dc9d0215e RDI: 00000000ffffff9c [ 10.922727] RBP: 0000000000000008 R08: 0000000000080000 R09: 00007f5dc9d0215e [ 10.922731] R10: 0000000000000000 R11: 0000000000000287 R12: 00007f5dca75555f [ 10.922735] R13: 00005598f2a69ad0 R14: 0000000000000001 R15: 00005598f2a6f690 [ 10.922742] handlers: WARNING! Modules path isn't set, but is needed to parse this symbol [ 10.925696] amd_gpio_irq_handler pinctrl_amd [ 10.928757] Disabling IRQ #7 [ 11.000127] r8169 0000:0a:00.0 enp10s0: renamed from eth0 [ 11.040131] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input10 [ 11.062301] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC671: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 11.062314] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.062321] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 11.062327] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 11.062331] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 11.062335] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 11.062340] snd_hda_codec_realtek hdaudioC1D0: Line=0x1b [ 11.100251] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input12 [ 11.136401] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input13 [ 11.137883] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input14 [ 11.138953] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input15 [ 11.176742] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-11/input0 [ 11.227161] Generic FE-GE Realtek PHY r8169-a00:00: attached PHY driver (mii_bus:phy_addr=r8169-a00:00, irq=MAC) [ 11.237250] kvm: Nested Virtualization enabled [ 11.237675] SVM: kvm: Nested Paging enabled [ 11.237678] SVM: Virtual VMLOAD VMSAVE supported [ 11.237680] SVM: Virtual GIF supported [ 11.254272] rtw_8821ce 0000:09:00.0: enabling device (0100 -> 0103) [ 11.255242] rtw_8821ce 0000:09:00.0: Firmware version 24.8.0, H2C version 12 [ 11.259785] MCE: In-kernel MCE decoding enabled. [ 11.363583] intel_rapl_common: Found RAPL domain package [ 11.363589] intel_rapl_common: Found RAPL domain core [ 11.410765] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-11/input1 [ 11.420576] r8169 0000:0a:00.0 enp10s0: Link is Down [ 11.466717] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 11.469832] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 11.471818] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 11.472590] input: Logitech Wireless Keyboard PID:4075 Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input16 [ 11.508438] hid-generic 0003:046D:4075.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 [ 11.516054] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input21 [ 11.517269] hid-generic 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:01:00.0-11/input1:2 [ 11.562528] mousedev: PS/2 mouse device common for all mice [ 11.564389] [drm] amdgpu kernel modesetting enabled. [ 11.589805] Virtual CRAT table created for CPU [ 11.590262] amdgpu: Topology: Add CPU node [ 11.591010] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 11.591018] fb0: switching to amdgpudrmfb from EFI VGA [ 11.592584] Console: switching to colour dummy device 80x25 [ 11.592857] amdgpu 0000:0c:00.0: vgaarb: deactivate vga console [ 11.594681] amdgpu 0000:0c:00.0: enabling device (0106 -> 0107) [ 11.601781] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87D6 0xCA). [ 11.601801] amdgpu 0000:0c:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) [ 11.601948] [drm] register mmio base: 0xFCA00000 [ 11.601955] [drm] register mmio size: 524288 [ 11.601959] [drm] PCIE atomic ops is not supported [ 11.602930] [drm] add ip block number 0 <soc15_common> [ 11.602939] [drm] add ip block number 1 <gmc_v9_0> [ 11.602941] [drm] add ip block number 2 <vega10_ih> [ 11.602944] [drm] add ip block number 3 <psp> [ 11.602946] [drm] add ip block number 4 <smu> [ 11.602949] [drm] add ip block number 5 <gfx_v9_0> [ 11.602951] [drm] add ip block number 6 <sdma_v4_0> [ 11.602954] [drm] add ip block number 7 <dm> [ 11.602956] [drm] add ip block number 8 <vcn_v2_0> [ 11.602959] [drm] add ip block number 9 <jpeg_v2_0> [ 11.603002] amdgpu 0000:0c:00.0: amdgpu: Fetched VBIOS from VFCT [ 11.603051] amdgpu: ATOM BIOS: 113-RENOIR-026 [ 11.605135] [drm] VCN decode is enabled in VM mode [ 11.605141] [drm] VCN encode is enabled in VM mode [ 11.605144] [drm] JPEG decode is enabled in VM mode [ 11.606408] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 11.606531] amdgpu 0000:0c:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [ 11.606539] amdgpu 0000:0c:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 11.606545] amdgpu 0000:0c:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 11.606585] [drm] Detected VRAM RAM=512M, BAR=512M [ 11.606588] [drm] RAM width 128bits DDR4 [ 11.607685] [TTM] Zone kernel: Available graphics memory: 14040156 KiB [ 11.607693] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 11.630603] [drm] amdgpu: 512M of VRAM memory ready [ 11.630690] [drm] amdgpu: 3072M of GTT memory ready. [ 11.630759] ------------[ cut here ]------------ [ 11.630762] amdgpu 0000:0c:00.0: Buffer overflow detected. Allocation size: 3005. Mapping size: 4096. [ 11.630776] WARNING: CPU: 2 PID: 314 at kernel/dma/swiotlb.c:380 swiotlb_bounce (kernel/dma/swiotlb.c:380) [ 11.630787] Modules linked in: joydev fjes(-) mousedev intel_rapl_msr intel_rapl_common amdgpu(+) edac_mce_amd rtw88_8821ce rtw88_8821c rtw88_pci kvm_amd rtw88_core kvm snd_hda_codec_realtek snd_hda_codec_generic hp_wmi(+) ledtrig_audio hid_logitech_dj snd_hda_codec_hdmi wmi_bmof sparse_keymap irqbypass snd_hda_intel mac80211 snd_intel_dspcfg crct10dif_pclmul crc32_pclmul snd_intel_sdw_acpi vfat fat ghash_clmulni_intel snd_hda_codec gpu_sched i2c_algo_bit aesni_intel drm_ttm_helper ttm crypto_simd r8169 snd_hda_core cryptd drm_kms_helper rapl realtek snd_hwdep cfg80211 mdio_devres pcspkr snd_pcm k10temp cec snd_timer libphy sp5100_tco libarc4 tpm_crb snd syscopyarea i2c_piix4 ccp sysfillrect soundcore sysimgblt fb_sys_fops usbhid tpm_tis tpm_tis_core wmi video tpm gpio_amdpt pinctrl_amd rng_core gpio_generic mac_hid acpi_tad acpi_cpufreq btusb btrtl btbcm btintel bluetooth ecdh_generic rfkill ecc crc16 pkcs8_key_parser drm fuse agpgart bpf_preload ip_tables x_tables xfs libcrc32c [ 11.630983] crc32c_generic crc32c_intel xhci_pci xhci_pci_renesas [ 11.630996] CPU: 2 PID: 314 Comm: systemd-udevd Tainted: G B 5.12.0-rc3-debug-00033-g167e3e00e2be #1 [ 11.631003] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 11.631007] RIP: 0010:swiotlb_bounce (kernel/dma/swiotlb.c:380) [ 11.631014] Code: ef e8 a9 df 28 00 4c 8b 6d 00 48 89 ef e8 4d 23 8c 00 4d 89 f0 48 89 d9 4c 89 ea 48 89 c6 48 c7 c7 a0 ed e8 ae e8 3d 57 e7 00 <0f> 0b 48 c7 c7 e0 89 5b af 49 89 de e8 74 df 28 00 48 8b 05 dd 41 All code ======== 0: ef out %eax,(%dx) 1: e8 a9 df 28 00 call 0x28dfaf 6: 4c 8b 6d 00 mov 0x0(%rbp),%r13 a: 48 89 ef mov %rbp,%rdi d: e8 4d 23 8c 00 call 0x8c235f 12: 4d 89 f0 mov %r14,%r8 15: 48 89 d9 mov %rbx,%rcx 18: 4c 89 ea mov %r13,%rdx 1b: 48 89 c6 mov %rax,%rsi 1e: 48 c7 c7 a0 ed e8 ae mov $0xffffffffaee8eda0,%rdi 25: e8 3d 57 e7 00 call 0xe75767 2a:* 0f 0b ud2 <-- trapping instruction 2c: 48 c7 c7 e0 89 5b af mov $0xffffffffaf5b89e0,%rdi 33: 49 89 de mov %rbx,%r14 36: e8 74 df 28 00 call 0x28dfaf 3b: 48 rex.W 3c: 8b .byte 0x8b 3d: 05 .byte 0x5 3e: dd .byte 0xdd 3f: 41 rex.B
Code starting with the faulting instruction
===========================================
0: 0f 0b ud2
2: 48 c7 c7 e0 89 5b af mov $0xffffffffaf5b89e0,%rdi 9: 49 89 de mov %rbx,%r14 c: e8 74 df 28 00 call 0x28df85 11: 48 rex.W 12: 8b .byte 0x8b 13: 05 .byte 0x5 14: dd .byte 0xdd 15: 41 rex.B [ 11.631020] RSP: 0018:ffffc9000190f138 EFLAGS: 00010286 [ 11.631026] RAX: 0000000000000000 RBX: 0000000000000bbd RCX: 0000000000000000 [ 11.631030] RDX: 0000000000000027 RSI: 0000000000000004 RDI: fffff52000321e19 [ 11.631034] RBP: ffff8881050190c8 R08: ffffffffadacdcae R09: ffff8887c32a06eb [ 11.631038] R10: ffffed10f86540dd R11: 0000000000000001 R12: 000000000a20d443 [ 11.631042] R13: ffff888105081c90 R14: 0000000000001000 R15: 0000000000000002 [ 11.631046] FS: 00007fbdc0f1ca40(0000) GS:ffff8887c3280000(0000) knlGS:0000000000000000 [ 11.631051] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 11.631055] CR2: 00007fd6d40117f8 CR3: 000000013da9c000 CR4: 0000000000350ee0 [ 11.631060] Call Trace: [ 11.631065] swiotlb_tbl_map_single (kernel/dma/swiotlb.c:562) [ 11.631074] swiotlb_map (kernel/dma/swiotlb.c:672) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.631080] ? drm_mm_init+0x126/0x140 drm [ 11.631206] ? swiotlb_sync_single_for_cpu (kernel/dma/swiotlb.c:665) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.631213] ? ttm_range_man_init+0xdd/0x100 ttm WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.631236] ? amdgpu_ttm_init.cold+0x153/0x16f amdgpu [ 11.632193] dma_map_page_attrs (kernel/dma/direct.h:91 kernel/dma/mapping.c:156) [ 11.632200] ? dmam_free_coherent (kernel/dma/mapping.c:145) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.632207] amdgpu_gart_init+0x77/0xf0 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.632909] gmc_v9_0_sw_init+0x910/0x980 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.633492] ? gmc_v9_0_late_init+0xe0/0xe0 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.634128] ? __drmm_add_action+0xf0/0x140 drm WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.634214] ? drm_mode_config_cleanup+0x480/0x480 drm WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.634297] ? drm_mode_config_cleanup+0x480/0x480 drm WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.634381] amdgpu_device_init.cold+0x1483/0x2400 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.635013] ? amdgpu_device_cache_pci_state+0x90/0x90 amdgpu [ 11.635601] ? pci_find_saved_ext_cap (drivers/pci/pci.c:1797) [ 11.635607] ? pci_bus_read_config_byte (drivers/pci/access.c:64) [ 11.635611] ? __list_add_valid (lib/list_debug.c:26) [ 11.635616] ? kasan_unpoison (mm/kasan/shadow.c:102 mm/kasan/shadow.c:136 mm/kasan/shadow.c:109) [ 11.635621] ? pci_enable_device_flags (drivers/pci/pci.c:1900) [ 11.635625] ? pci_enable_bridge (drivers/pci/pci.c:1868) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.635630] amdgpu_driver_load_kms+0xb1/0x3f0 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.636214] amdgpu_pci_probe+0x172/0x200 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.636796] ? amdgpu_pci_remove+0x80/0x80 amdgpu [ 11.637510] local_pci_probe (drivers/pci/pci-driver.c:309) [ 11.637517] pci_device_probe (drivers/pci/pci-driver.c:366 drivers/pci/pci-driver.c:391 drivers/pci/pci-driver.c:434) [ 11.637522] ? pci_device_remove (drivers/pci/pci-driver.c:419) [ 11.637527] ? kernfs_put (./arch/x86/include/asm/atomic.h:123 (discriminator 1) ./include/asm-generic/atomic-instrumented.h:749 (discriminator 1) fs/kernfs/dir.c:511 (discriminator 1)) [ 11.637531] ? sysfs_do_create_link_sd (fs/sysfs/symlink.c:48) [ 11.637536] really_probe (drivers/base/dd.c:554) [ 11.637541] driver_probe_device (drivers/base/dd.c:740) [ 11.637545] device_driver_attach (drivers/base/dd.c:1015) [ 11.637549] ? device_driver_attach (drivers/base/dd.c:1047) [ 11.637553] __driver_attach (drivers/base/dd.c:1094) [ 11.637557] ? device_driver_attach (drivers/base/dd.c:1047) [ 11.637560] bus_for_each_dev (drivers/base/bus.c:305) [ 11.637565] ? subsys_dev_iter_exit (drivers/base/bus.c:294) [ 11.637569] ? __list_add_valid (lib/list_debug.c:26) [ 11.637574] bus_add_driver (drivers/base/bus.c:623) [ 11.637580] driver_register (drivers/base/driver.c:171) [ 11.637584] ? 0xffffffffc1588000 [ 11.637588] do_one_initcall (init/main.c:1226) [ 11.637593] ? perf_trace_initcall_level (init/main.c:1217) [ 11.637597] ? kfree (mm/slub.c:3161 mm/slub.c:4213) [ 11.637602] ? kasan_set_track (mm/kasan/common.c:46) [ 11.637607] ? kasan_unpoison (mm/kasan/shadow.c:102 mm/kasan/shadow.c:136 mm/kasan/shadow.c:109) [ 11.637611] ? kasan_unpoison (mm/kasan/shadow.c:102 mm/kasan/shadow.c:136 mm/kasan/shadow.c:109) [ 11.637615] do_init_module (kernel/module.c:3655) [ 11.637622] load_module (kernel/module.c:4050) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.637626] ? xfs_file_buffered_read+0x82/0x130 xfs [ 11.637883] ? module_frob_arch_sections+0x20/0x20 [ 11.637888] ? kernel_read (fs/read_write.c:469) [ 11.637893] ? kernel_read_file (./arch/x86/include/asm/atomic.h:95 ./include/asm-generic/atomic-instrumented.h:241 ./include/linux/fs.h:2940 fs/kernel_read_file.c:122) [ 11.637901] ? __do_sys_finit_module (kernel/module.c:4140) [ 11.637905] __do_sys_finit_module (kernel/module.c:4140) [ 11.637909] ? __ia32_sys_init_module (kernel/module.c:4118) [ 11.637913] ? get_nth_filter.part.0 (kernel/seccomp.c:1157) [ 11.637918] ? randomize_stack_top (mm/util.c:509) [ 11.637923] ? __ia32_compat_sys_newlstat (fs/stat.c:382) [ 11.637929] ? __audit_syscall_entry (kernel/auditsc.c:1689) [ 11.637933] ? ktime_get_coarse_real_ts64 (kernel/time/timekeeping.c:2230 (discriminator 3)) [ 11.637938] do_syscall_64 (arch/x86/entry/common.c:46) [ 11.637944] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:112) [ 11.637949] RIP: 0033:0x7fbdc184c18d [ 11.637953] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 All code ======== 0: b4 0c mov $0xc,%ah 2: 00 0f add %cl,(%rdi) 4: 05 eb a9 66 0f add $0xf66a9eb,%eax 9: 1f (bad) a: 44 00 00 add %r8b,(%rax) d: f3 0f 1e fa endbr64 11: 48 89 f8 mov %rdi,%rax 14: 48 89 f7 mov %rsi,%rdi 17: 48 89 d6 mov %rdx,%rsi 1a: 48 89 ca mov %rcx,%rdx 1d: 4d 89 c2 mov %r8,%r10 20: 4d 89 c8 mov %r9,%r8 23: 4c 8b 4c 24 08 mov 0x8(%rsp),%r9 28: 0f 05 syscall 2a:* 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax <-- trapping instruction 30: 73 01 jae 0x33 32: c3 ret 33: 48 8b 0d b3 6c 0c 00 mov 0xc6cb3(%rip),%rcx # 0xc6ced 3a: f7 d8 neg %eax 3c: 64 89 01 mov %eax,%fs:(%rcx)
3f: 48 rex.W
Code starting with the faulting instruction
===========================================
0: 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax 6: 73 01 jae 0x9 8: c3 ret 9: 48 8b 0d b3 6c 0c 00 mov 0xc6cb3(%rip),%rcx # 0xc6cc3 10: f7 d8 neg %eax 12: 64 89 01 mov %eax,%fs:(%rcx) 15: 48 rex.W [ 11.637957] RSP: 002b:00007ffeae8de308 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 11.637962] RAX: ffffffffffffffda RBX: 000055db08823060 RCX: 00007fbdc184c18d [ 11.637965] RDX: 0000000000000000 RSI: 00007fbdc19a9a9d RDI: 0000000000000018 [ 11.637970] RBP: 0000000000020000 R08: 0000000000000000 R09: 00007fbdc1bdc5ea [ 11.637973] R10: 0000000000000018 R11: 0000000000000246 R12: 00007fbdc19a9a9d [ 11.637975] R13: 0000000000000000 R14: 000055db088292c0 R15: 000055db08823060 [ 11.637980] ---[ end trace bee6f34729e28f2c ]--- [ 11.637985] BUG: unable to handle page fault for address: 000008714b909443 [ 11.637995] #PF: supervisor write access in kernel mode [ 11.638001] #PF: error_code(0x0002) - not-present page [ 11.638007] PGD 0 P4D 0 [ 11.638014] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 11.638021] CPU: 2 PID: 314 Comm: systemd-udevd Tainted: G B W 5.12.0-rc3-debug-00033-g167e3e00e2be #1 [ 11.638031] Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 [ 11.638038] RIP: 0010:__memcpy (arch/x86/lib/memcpy_64.S:39) [ 11.638044] Code: 74 e0 8b 05 38 4e 67 01 85 c0 75 d6 e8 47 6f 6d ff b8 01 00 00 00 c3 cc 0f 1f 44 00 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4 All code ======== 0: 74 e0 je 0xffffffffffffffe2 2: 8b 05 38 4e 67 01 mov 0x1674e38(%rip),%eax # 0x1674e40 8: 85 c0 test %eax,%eax a: 75 d6 jne 0xffffffffffffffe2 c: e8 47 6f 6d ff call 0xffffffffff6d6f58 11: b8 01 00 00 00 mov $0x1,%eax 16: c3 ret 17: cc int3 18: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) 1d: 48 89 f8 mov %rdi,%rax 20: 48 89 d1 mov %rdx,%rcx 23: 48 c1 e9 03 shr $0x3,%rcx 27: 83 e2 07 and $0x7,%edx 2a:* f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi) <-- trapping instruction 2d: 89 d1 mov %edx,%ecx 2f: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 31: c3 ret 32: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1) 38: 48 89 f8 mov %rdi,%rax 3b: 48 89 d1 mov %rdx,%rcx 3e: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
Code starting with the faulting instruction
===========================================
0: f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi) 3: 89 d1 mov %edx,%ecx 5: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 7: c3 ret 8: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1) e: 48 89 f8 mov %rdi,%rax 11: 48 89 d1 mov %rdx,%rcx 14: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) [ 11.638058] RSP: 0018:ffffc9000190f188 EFLAGS: 00010206 [ 11.638065] RAX: 000008714b909443 RBX: 000000000a20d000 RCX: 0000000000000177 [ 11.638071] RDX: 0000000000000005 RSI: ffff88800a20d443 RDI: 000008714b909443 [ 11.638078] RBP: 0000000000000002 R08: 0000000000000001 R09: 000008714b90a000 [ 11.638085] R10: ffffed1001441bff R11: 0000000000000001 R12: 0000000000000002 [ 11.638091] R13: ffff8887c008f000 R14: 0000000000000048 R15: 0000000000000002 [ 11.638098] FS: 00007fbdc0f1ca40(0000) GS:ffff8887c3280000(0000) knlGS:0000000000000000 [ 11.638106] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 11.638112] CR2: 000008714b909443 CR3: 000000013da9c000 CR4: 0000000000350ee0 [ 11.638119] Call Trace: [ 11.638123] swiotlb_tbl_map_single (kernel/dma/swiotlb.c:562) [ 11.638133] swiotlb_map (kernel/dma/swiotlb.c:672) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.638141] ? drm_mm_init+0x126/0x140 drm [ 11.638225] ? swiotlb_sync_single_for_cpu (kernel/dma/swiotlb.c:665) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.638232] ? ttm_range_man_init+0xdd/0x100 ttm WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.638251] ? amdgpu_ttm_init.cold+0x153/0x16f amdgpu [ 11.638881] dma_map_page_attrs (kernel/dma/direct.h:91 kernel/dma/mapping.c:156) [ 11.638888] ? dmam_free_coherent (kernel/dma/mapping.c:145) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.638896] amdgpu_gart_init+0x77/0xf0 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.639489] gmc_v9_0_sw_init+0x910/0x980 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.640090] ? gmc_v9_0_late_init+0xe0/0xe0 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.640860] ? __drmm_add_action+0xf0/0x140 drm WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.641004] ? drm_mode_config_cleanup+0x480/0x480 drm WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.641127] ? drm_mode_config_cleanup+0x480/0x480 drm WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.641222] amdgpu_device_init.cold+0x1483/0x2400 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.641849] ? amdgpu_device_cache_pci_state+0x90/0x90 amdgpu [ 11.642456] ? pci_find_saved_ext_cap (drivers/pci/pci.c:1797) [ 11.642466] ? pci_bus_read_config_byte (drivers/pci/access.c:64) [ 11.642473] ? __list_add_valid (lib/list_debug.c:26) [ 11.642481] ? kasan_unpoison (mm/kasan/shadow.c:102 mm/kasan/shadow.c:136 mm/kasan/shadow.c:109) [ 11.642490] ? pci_enable_device_flags (drivers/pci/pci.c:1900) [ 11.642497] ? pci_enable_bridge (drivers/pci/pci.c:1868) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.642505] amdgpu_driver_load_kms+0xb1/0x3f0 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.643105] amdgpu_pci_probe+0x172/0x200 amdgpu WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.643686] ? amdgpu_pci_remove+0x80/0x80 amdgpu [ 11.644405] local_pci_probe (drivers/pci/pci-driver.c:309) [ 11.644415] pci_device_probe (drivers/pci/pci-driver.c:366 drivers/pci/pci-driver.c:391 drivers/pci/pci-driver.c:434) [ 11.644422] ? pci_device_remove (drivers/pci/pci-driver.c:419) [ 11.644430] ? kernfs_put (./arch/x86/include/asm/atomic.h:123 (discriminator 1) ./include/asm-generic/atomic-instrumented.h:749 (discriminator 1) fs/kernfs/dir.c:511 (discriminator 1)) [ 11.644437] ? sysfs_do_create_link_sd (fs/sysfs/symlink.c:48) [ 11.644446] really_probe (drivers/base/dd.c:554) [ 11.644453] driver_probe_device (drivers/base/dd.c:740) [ 11.644460] device_driver_attach (drivers/base/dd.c:1015) [ 11.644467] ? device_driver_attach (drivers/base/dd.c:1047) [ 11.644474] __driver_attach (drivers/base/dd.c:1094) [ 11.644480] ? device_driver_attach (drivers/base/dd.c:1047) [ 11.644487] bus_for_each_dev (drivers/base/bus.c:305) [ 11.644494] ? subsys_dev_iter_exit (drivers/base/bus.c:294) [ 11.644501] ? __list_add_valid (lib/list_debug.c:26) [ 11.644510] bus_add_driver (drivers/base/bus.c:623) [ 11.644518] driver_register (drivers/base/driver.c:171) [ 11.644525] ? 0xffffffffc1588000 [ 11.644531] do_one_initcall (init/main.c:1226) [ 11.644539] ? perf_trace_initcall_level (init/main.c:1217) [ 11.644547] ? kfree (mm/slub.c:3161 mm/slub.c:4213) [ 11.644554] ? kasan_set_track (mm/kasan/common.c:46) [ 11.644561] ? kasan_unpoison (mm/kasan/shadow.c:102 mm/kasan/shadow.c:136 mm/kasan/shadow.c:109) [ 11.644568] ? kasan_unpoison (mm/kasan/shadow.c:102 mm/kasan/shadow.c:136 mm/kasan/shadow.c:109) [ 11.644576] do_init_module (kernel/module.c:3655) [ 11.644585] load_module (kernel/module.c:4050) WARNING! Modules path isn't set, but is needed to parse this symbol [ 11.644592] ? xfs_file_buffered_read+0x82/0x130 xfs [ 11.644852] ? module_frob_arch_sections+0x20/0x20 [ 11.644860] ? kernel_read (fs/read_write.c:469) [ 11.644868] ? kernel_read_file (./arch/x86/include/asm/atomic.h:95 ./include/asm-generic/atomic-instrumented.h:241 ./include/linux/fs.h:2940 fs/kernel_read_file.c:122) [ 11.644879] ? __do_sys_finit_module (kernel/module.c:4140) [ 11.644886] __do_sys_finit_module (kernel/module.c:4140) [ 11.644893] ? __ia32_sys_init_module (kernel/module.c:4118) [ 11.644900] ? get_nth_filter.part.0 (kernel/seccomp.c:1157) [ 11.644909] ? randomize_stack_top (mm/util.c:509) [ 11.644918] ? __ia32_compat_sys_newlstat (fs/stat.c:382) [ 11.644927] ? __audit_syscall_entry (kernel/auditsc.c:1689) [ 11.644934] ? ktime_get_coarse_real_ts64 (kernel/time/timekeeping.c:2230 (discriminator 3)) [ 11.644943] do_syscall_64 (arch/x86/entry/common.c:46) [ 11.644951] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:112) [ 11.644959] RIP: 0033:0x7fbdc184c18d [ 11.644965] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 All code ======== 0: b4 0c mov $0xc,%ah 2: 00 0f add %cl,(%rdi) 4: 05 eb a9 66 0f add $0xf66a9eb,%eax 9: 1f (bad) a: 44 00 00 add %r8b,(%rax) d: f3 0f 1e fa endbr64 11: 48 89 f8 mov %rdi,%rax 14: 48 89 f7 mov %rsi,%rdi 17: 48 89 d6 mov %rdx,%rsi 1a: 48 89 ca mov %rcx,%rdx 1d: 4d 89 c2 mov %r8,%r10 20: 4d 89 c8 mov %r9,%r8 23: 4c 8b 4c 24 08 mov 0x8(%rsp),%r9 28: 0f 05 syscall 2a:* 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax <-- trapping instruction 30: 73 01 jae 0x33 32: c3 ret 33: 48 8b 0d b3 6c 0c 00 mov 0xc6cb3(%rip),%rcx # 0xc6ced 3a: f7 d8 neg %eax 3c: 64 89 01 mov %eax,%fs:(%rcx)
3f: 48 rex.W
Code starting with the faulting instruction
===========================================
0: 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax 6: 73 01 jae 0x9 8: c3 ret 9: 48 8b 0d b3 6c 0c 00 mov 0xc6cb3(%rip),%rcx # 0xc6cc3 10: f7 d8 neg %eax 12: 64 89 01 mov %eax,%fs:(%rcx) 15: 48 rex.W [ 11.644979] RSP: 002b:00007ffeae8de308 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 11.644989] RAX: ffffffffffffffda RBX: 000055db08823060 RCX: 00007fbdc184c18d [ 11.644996] RDX: 0000000000000000 RSI: 00007fbdc19a9a9d RDI: 0000000000000018 [ 11.645002] RBP: 0000000000020000 R08: 0000000000000000 R09: 00007fbdc1bdc5ea [ 11.645009] R10: 0000000000000018 R11: 0000000000000246 R12: 00007fbdc19a9a9d [ 11.645015] R13: 0000000000000000 R14: 000055db088292c0 R15: 000055db08823060 [ 11.645024] Modules linked in: joydev mousedev intel_rapl_msr intel_rapl_common amdgpu(+) edac_mce_amd rtw88_8821ce rtw88_8821c rtw88_pci kvm_amd rtw88_core kvm snd_hda_codec_realtek snd_hda_codec_generic hp_wmi(+) ledtrig_audio hid_logitech_dj snd_hda_codec_hdmi wmi_bmof sparse_keymap irqbypass snd_hda_intel mac80211 snd_intel_dspcfg crct10dif_pclmul crc32_pclmul snd_intel_sdw_acpi vfat fat ghash_clmulni_intel snd_hda_codec gpu_sched i2c_algo_bit aesni_intel drm_ttm_helper ttm crypto_simd r8169 snd_hda_core cryptd drm_kms_helper rapl realtek snd_hwdep cfg80211 mdio_devres pcspkr snd_pcm k10temp cec snd_timer libphy sp5100_tco libarc4 tpm_crb snd syscopyarea i2c_piix4 ccp sysfillrect soundcore sysimgblt fb_sys_fops usbhid tpm_tis tpm_tis_core wmi video tpm gpio_amdpt pinctrl_amd rng_core gpio_generic mac_hid acpi_tad acpi_cpufreq btusb btrtl btbcm btintel bluetooth ecdh_generic rfkill ecc crc16 pkcs8_key_parser drm fuse agpgart bpf_preload ip_tables x_tables xfs libcrc32c crc32c_generic [ 11.645156] crc32c_intel xhci_pci xhci_pci_renesas [ 11.645210] CR2: 000008714b909443 [ 11.645216] ---[ end trace bee6f34729e28f2d ]--- [ 11.645221] RIP: 0010:__memcpy (arch/x86/lib/memcpy_64.S:39) [ 11.645227] Code: 74 e0 8b 05 38 4e 67 01 85 c0 75 d6 e8 47 6f 6d ff b8 01 00 00 00 c3 cc 0f 1f 44 00 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4 All code ======== 0: 74 e0 je 0xffffffffffffffe2 2: 8b 05 38 4e 67 01 mov 0x1674e38(%rip),%eax # 0x1674e40 8: 85 c0 test %eax,%eax a: 75 d6 jne 0xffffffffffffffe2 c: e8 47 6f 6d ff call 0xffffffffff6d6f58 11: b8 01 00 00 00 mov $0x1,%eax 16: c3 ret 17: cc int3 18: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) 1d: 48 89 f8 mov %rdi,%rax 20: 48 89 d1 mov %rdx,%rcx 23: 48 c1 e9 03 shr $0x3,%rcx 27: 83 e2 07 and $0x7,%edx 2a:* f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi) <-- trapping instruction 2d: 89 d1 mov %edx,%ecx 2f: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 31: c3 ret 32: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1) 38: 48 89 f8 mov %rdi,%rax 3b: 48 89 d1 mov %rdx,%rcx 3e: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
Code starting with the faulting instruction
===========================================
0: f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi) 3: 89 d1 mov %edx,%ecx 5: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 7: c3 ret 8: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1) e: 48 89 f8 mov %rdi,%rax 11: 48 89 d1 mov %rdx,%rcx 14: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) [ 11.645241] RSP: 0018:ffffc9000190f188 EFLAGS: 00010206 [ 11.645247] RAX: 000008714b909443 RBX: 000000000a20d000 RCX: 0000000000000177 [ 11.645254] RDX: 0000000000000005 RSI: ffff88800a20d443 RDI: 000008714b909443 [ 11.645261] RBP: 0000000000000002 R08: 0000000000000001 R09: 000008714b90a000 [ 11.645268] R10: ffffed1001441bff R11: 0000000000000001 R12: 0000000000000002 [ 11.645274] R13: ffff8887c008f000 R14: 0000000000000048 R15: 0000000000000002 [ 11.645281] FS: 00007fbdc0f1ca40(0000) GS:ffff8887c3280000(0000) knlGS:0000000000000000 [ 11.645289] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 11.645295] CR2: 000008714b909443 CR3: 000000013da9c000 CR4: 0000000000350ee0 [ 11.911417] input: Logitech Wireless Keyboard PID:4075 as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4075.0003/input/input25 [ 11.916555] logitech-hidpp-device 0003:046D:4075.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:01:00.0-11/input1:1 [ 11.999932] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-11/1-11:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input26 [ 12.003578] logitech-hidpp-device 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:01:00.0-11/input1:2 [ 12.093114] rtw_8821ce 0000:09:00.0: start vif 74:12:b3:a0:4a:cb on port 0 [ 14.558903] r8169 0000:0a:00.0 enp10s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 14.558977] IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready [ 16.594062] kauditd_printk_skb: 32 callbacks suppressed [ 16.594072] audit: type=1131 audit(1625508119.391:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.787517] audit: type=1101 audit(1625508125.584:45): pid=431 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' [ 22.795143] audit: type=1103 audit(1625508125.591:46): pid=431 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="nathan" exe="/usr/bin/sshd" hostname=192.168.4.54 addr=192.168.4.54 terminal=ssh res=success' [ 22.795888] audit: type=1006 audit(1625508125.591:47): pid=431 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 [ 22.796100] audit: type=1300 audit(1625508125.591:47): arch=c000003e syscall=1 success=yes exit=4 a0=3 a1=7ffe0d54df00 a2=4 a3=3e8 items=0 ppid=394 pid=431 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="sshd" exe="/usr/bin/sshd" key=(null) [ 22.800853] audit: type=1327 audit(1625508125.591:47): proctitle=737368643A206E617468616E205B707269765D [ 22.877834] audit: type=1130 audit(1625508125.674:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.917759] audit: type=1101 audit(1625508125.714:49): pid=434 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.918096] audit: type=1103 audit(1625508125.714:50): pid=434 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="nathan" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' [ 22.918709] audit: type=1006 audit(1625508125.714:51): pid=434 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1 [ 22.918795] audit: type=1300 audit(1625508125.714:51): arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7fff13327970 a2=4 a3=3e8 items=0 ppid=1 pid=434 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null) [ 30.400687] kauditd_printk_skb: 11 callbacks suppressed [ 30.400699] audit: type=1100 audit(1625508133.194:60): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="nathan" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.405376] audit: type=1101 audit(1625508133.201:61): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.406114] audit: type=1110 audit(1625508133.201:62): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.407411] audit: type=1105 audit(1625508133.204:63): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.473080] audit: type=1106 audit(1625508133.268:64): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 30.474043] audit: type=1104 audit(1625508133.271:65): pid=601 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 32.679545] audit: type=1101 audit(1625508135.474:66): pid=646 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="nathan" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 32.680133] audit: type=1110 audit(1625508135.474:67): pid=646 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success' [ 32.681346] audit: type=1105 audit(1625508135.478:68): pid=646 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/doas" hostname=hp-4300G addr=? terminal=pts/0 res=success'
Will Deacon
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
In reply to Nathan ChancellorHi Nathan,
I may have just spotted something in these logs...
Quoted 6 lines · Nathan Chancellor
[ 2.340956] pci 0000:0c:00.1: Adding to iommu group 4 [ 2.340996] pci 0000:0c:00.2: Adding to iommu group 4 [ 2.341038] pci 0000:0c:00.3: Adding to iommu group 4 [ 2.341078] pci 0000:0c:00.4: Adding to iommu group 4 [ 2.341122] pci 0000:0c:00.6: Adding to iommu group 4 [ 2.341163] pci 0000:0d:00.0: Adding to iommu group 4
Quoted 8 lines
[ 2.341203] pci 0000:0d:00.1: Adding to iommu group 4 [ 2.361821] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 2.361839] pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade): [ 2.361846] PPR X2APIC NX GT IA GA PC GA_vAPIC [ 2.361861] AMD-Vi: Interrupt remapping enabled [ 2.361865] AMD-Vi: Virtual APIC enabled [ 2.361870] AMD-Vi: X2APIC enabled [ 2.362272] AMD-Vi: Lazy IO/TLB flushing enabled
So at this point, the AMD IOMMU driver does:
swiotlb = (iommu_default_passthrough() || sme_me_mask) ? 1 : 0;
where 'swiotlb' is a global variable indicating whether or not swiotlb is in use. It's picked up a bit later on by pci_swiotlb_late_init(), which will call swiotlb_exit() if 'swiotlb' is false.
Now, that used to work fine, because swiotlb_exit() clears 'io_tlb_default_mem' to NULL, but now with the restricted DMA changes, I think that all the devices which have successfully probed beforehand will have stale pointers to the freed structure in their 'dev->dma_io_tlb_mem' field.
Will
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 8 lines · Will Deacon
So at this point, the AMD IOMMU driver does:
swiotlb = (iommu_default_passthrough() || sme_me_mask) ? 1 : 0;where 'swiotlb' is a global variable indicating whether or not swiotlb is in use. It's picked up a bit later on by
pci_swiotlb_late_init(), which will callswiotlb_exit()if 'swiotlb' is false.
Quoted 5 lines
Now, that used to work fine, because
swiotlb_exit()clears 'io_tlb_default_mem' to NULL, but now with the restricted DMA changes, I think that all the devices which have successfully probed beforehand will have stale pointers to the freed structure in their 'dev->dma_io_tlb_mem' field.
Yeah. I don't think we can do that anymore, and I also think it is a bad idea to start with.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Will Deacon
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 9 lines · Christoph Hellwig
Quoted 8 lines · Will Deacon
So at this point, the AMD IOMMU driver does:
swiotlb = (iommu_default_passthrough() || sme_me_mask) ? 1 : 0;where 'swiotlb' is a global variable indicating whether or not swiotlb is in use. It's picked up a bit later on by
pci_swiotlb_late_init(), which will callswiotlb_exit()if 'swiotlb' is false.
Quoted 8 lines
Quoted 5 lines
Now, that used to work fine, because
swiotlb_exit()clears 'io_tlb_default_mem' to NULL, but now with the restricted DMA changes, I think that all the devices which have successfully probed beforehand will have stale pointers to the freed structure in their 'dev->dma_io_tlb_mem' field.Yeah. I don't think we can do that anymore, and I also think it is a bad idea to start with.
I've had a crack at reworking things along the following lines:
- io_tlb_default_mem now lives in the BSS, the flexible array member is now a pointer and that part is allocated dynamically (downside of this is an extra indirection to get at the slots).
- io_tlb_default_mem.nslabs tells you whether the thing is valid
- swiotlb_exit() frees the slots array and clears the rest of the structure to 0. I also extended it to free the actual slabs, but I'm not sure why it wasn't doing that before.
So a non-NULL dev->dma_io_tlb_mem should always be valid to follow.
Untested diff below... Nathan, it would be ace if you're brave enough to give this a shot.
Will
--->8
drivers/base/core.c +1 -1
@@ -2820,7 +2820,7 @@ void device_initialize(struct device *dev) dev->dma_coherent = dma_default_coherent;#endif #ifdef CONFIG_SWIOTLB - dev->dma_io_tlb_mem = io_tlb_default_mem; + dev->dma_io_tlb_mem = &io_tlb_default_mem;#endif }EXPORT_SYMBOL_GPL (device_initialize);
drivers/xen/swiotlb-xen.c +2 -2
@@ -164,7 +164,7 @@ int __ref xen_swiotlb_init(void)int rc = -ENOMEM ;char *start; -if (io_tlb_default_mem !=NULL ) { +if (io_tlb_default_mem.nslabs) {pr_warn ("swiotlb buffer already initialized\n" );return -EEXIST ; }
@@ -547,7 +547,7 @@ xen_swiotlb_sync_sg_for_device(struct device *dev, struct scatterlist *sgl,static int xen_swiotlb_dma_supported (struct device *hwdev,u64 mask) { -return xen_phys_to_dma (hwdev, io_tlb_default_mem->end -1 ) <= mask; +return xen_phys_to_dma (hwdev, io_tlb_default_mem.end -1 ) <= mask; }const struct dma_map_ops xen_swiotlb_dma_ops = {
include/linux/swiotlb.h +2 -2
@@ -103,9 +103,9 @@ struct io_tlb_mem {phys_addr_t orig_addr;size_t alloc_size;unsigned int list; - } slots[]; + } *slots; }; -extern struct io_tlb_mem *io_tlb_default_mem; +extern struct io_tlb_mem io_tlb_default_mem;static inline bool is_swiotlb_buffer (struct device *dev,phys_addr_t paddr) {
kernel/dma/swiotlb.c +44 -33
181 lines not on this page · raw message
Robin Murphy
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 25 lines · Will Deacon
Quoted 9 lines · Christoph Hellwig
Quoted 8 lines · Will Deacon
So at this point, the AMD IOMMU driver does:
swiotlb = (iommu_default_passthrough() || sme_me_mask) ? 1 : 0;where 'swiotlb' is a global variable indicating whether or not swiotlb is in use. It's picked up a bit later on by
pci_swiotlb_late_init(), which will callswiotlb_exit()if 'swiotlb' is false.Quoted 8 lines
Quoted 5 lines
Now, that used to work fine, because
swiotlb_exit()clears 'io_tlb_default_mem' to NULL, but now with the restricted DMA changes, I think that all the devices which have successfully probed beforehand will have stale pointers to the freed structure in their 'dev->dma_io_tlb_mem' field.Yeah. I don't think we can do that anymore, and I also think it is a bad idea to start with.
I've had a crack at reworking things along the following lines:
-
io_tlb_default_memnow lives in the BSS, the flexible array member is now a pointer and that part is allocated dynamically (downside of this is an extra indirection to get at the slots).
Quoted 7 lines
- io_tlb_default_mem.nslabs tells you whether the thing is valid
-
swiotlb_exit()frees the slots array and clears the rest of the structure to 0. I also extended it to free the actual slabs, but I'm not sure why it wasn't doing that before.So a non-NULL
dev->dma_io_tlb_memshould always be valid to follow.
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
TBH I'm still not sure which one I prefer...
Robin.
----->8-----
drivers/base/core.c +0 -3
@@ -2847,9 +2847,6 @@ void device_initialize(struct device *dev)defined (CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL) dev->dma_coherent = dma_default_coherent;#endif -#ifdef CONFIG_SWIOTLB - dev->dma_io_tlb_mem = io_tlb_default_mem; -#endif }EXPORT_SYMBOL_GPL (device_initialize);
include/linux/swiotlb.h +5 -0
@@ -107,16 +107,21 @@ struct io_tlb_mem { };extern struct io_tlb_mem *io_tlb_default_mem; +static inline struct io_tlb_mem *dev_iotlb_mem (struct device *dev) +{ +return dev->dma_io_tlb_mem ?: io_tlb_default_mem; +} + static inline bool is_swiotlb_buffer(struct device *dev, phys_addr_t
paddr)
{
- struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
+ struct io_tlb_mem *mem = dev_iotlb_mem(dev);
return mem && paddr >= mem->start && paddr < mem->end;
}
static inline bool is_swiotlb_force_bounce(struct device *dev) {
- struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
+ struct io_tlb_mem *mem = dev_iotlb_mem(dev);
return mem && mem->force_bounce;
}
@@ -167,7 +172,7 @@ bool swiotlb_free(struct device *dev, struct page *page, size_t size);
static inline bool is_swiotlb_for_alloc(struct device *dev)
{
- return dev->dma_io_tlb_mem->for_alloc;
+ return dev_iotlb_mem(dev)->for_alloc;
}
#else
static inline struct page *swiotlb_alloc(struct device *dev, size_t size)
kernel/dma/swiotlb.c +0 -0
@@ -359,7 +359,7 @@ static unsigned int swiotlb_align_offset(struct device *dev, u64 addr) static void swiotlb_bounce(struct device *dev, phys_addr_t tlb_addr,
size_t size,
enum dma_data_direction dir)
{
- struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
+ struct io_tlb_mem *mem = dev_iotlb_mem(dev);
int index = (tlb_addr - mem->start) >> IO_TLB_SHIFT;
phys_addr_t orig_addr = mem->slots[index].orig_addr;
size_t alloc_size = mem->slots[index].alloc_size;
@@ -440,7 +440,7 @@ static unsigned int wrap_index(struct io_tlb_mem *mem, unsigned int index)
static int swiotlb_find_slots(struct device *dev, phys_addr_t orig_addr,
size_t alloc_size)
{
- struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
+ struct io_tlb_mem *mem = dev_iotlb_mem(dev);
unsigned long boundary_mask = dma_get_seg_boundary(dev);
dma_addr_t tbl_dma_addr =
phys_to_dma_unencrypted(dev, mem->start) & boundary_mask;
@@ -522,7 +522,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
size_t mapping_size, size_t alloc_size,
enum dma_data_direction dir, unsigned long attrs)
{
- struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
+ struct io_tlb_mem *mem = dev_iotlb_mem(dev);
unsigned int offset = swiotlb_align_offset(dev, orig_addr);
unsigned int i;
int index;
@@ -565,7 +565,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
static void swiotlb_release_slots(struct device *dev, phys_addr_ttlb_addr)
{
- struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
+ struct io_tlb_mem *mem = dev_iotlb_mem(dev);
unsigned long flags;
unsigned int offset = swiotlb_align_offset(dev, tlb_addr); int index = (tlb_addr - offset - mem->start) >> IO_TLB_SHIFT;
@@ -682,7 +682,7 @@ size_t swiotlb_max_mapping_size(struct device *dev)
bool is_swiotlb_active(struct device *dev)
{
- return dev->dma_io_tlb_mem != NULL;
+ return dev_iotlb_mem(dev) != NULL;
}
EXPORT_SYMBOL_GPL(is_swiotlb_active);
@@ -729,7 +729,7 @@ static void rmem_swiotlb_debugfs_init(struct reserved_mem *rmem)
struct page *swiotlb_alloc(struct device *dev, size_t size) {
- struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
+ struct io_tlb_mem *mem = dev_iotlb_mem(dev);
phys_addr_t tlb_addr;
int index;
@@ -792,7 +792,7 @@ static int rmem_swiotlb_device_init(struct reserved_mem *rmem,
static void rmem_swiotlb_device_release(struct reserved_mem *rmem,
struct device *dev)
{
- dev->dma_io_tlb_mem = io_tlb_default_mem;
+ dev->dma_io_tlb_mem = NULL;
}
static const struct reserved_mem_ops rmem_swiotlb_ops = {
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 6 lines · Robin Murphy
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
TBH I'm still not sure which one I prefer...
Claire did implement something like your suggestion originally, but I don't really like it as it doesn't scale for adding multiple global pools, e.g. for the 64-bit addressable one for the various encrypted secure guest schemes.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 6 lines · Christoph Hellwig
Quoted 5 lines · Robin Murphy
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
Quoted 6 lines
Quoted 1 line
TBH I'm still not sure which one I prefer...
Claire did implement something like your suggestion originally, but I don't really like it as it doesn't scale for adding multiple global pools, e.g. for the 64-bit addressable one for the various encrypted secure guest schemes.
Couple of things:
- I am not pushing to Linus the Claire's patchset until we have a resolution on this. I hope you all agree that is a sensible way forward as much as I hate doing that.
- I like Robin's fix as it is simplest looking. Would love to see if it does fix the problem.
- Christopher - we can always add multiple pools as the next milestone and just focus on this feature getting tested extensively during this release.
- Would it be worth (for future or maybe in another tiny fix) to also add a printk in swiotlb when we de-allocate the buffer so when someone looks through the dmesg it becomes much easier to diagnose issues?
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Will Deacon
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 14 lines · Konrad Rzeszutek Wilk
Quoted 6 lines · Christoph Hellwig
Quoted 5 lines · Robin Murphy
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
Quoted 6 lines
Quoted 1 line
TBH I'm still not sure which one I prefer...
Claire did implement something like your suggestion originally, but I don't really like it as it doesn't scale for adding multiple global pools, e.g. for the 64-bit addressable one for the various encrypted secure guest schemes.
Quoted 4 lines
Couple of things:
- I am not pushing to Linus the Claire's patchset until we have a resolution on this. I hope you all agree that is a sensible way forward as much as I hate doing that.
Sure, it's a pity but we could clearly use a bit more time to get these just right and we've run out of time for 5.14.
I think the main question I have is how would you like to see patches for 5.15? i.e. as patches on top of devel/for-linus-5.14 or something else?
Cheers,
Will
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 20 lines · Will Deacon
Quoted 14 lines · Konrad Rzeszutek Wilk
Quoted 6 lines · Christoph Hellwig
Quoted 5 lines · Robin Murphy
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
Quoted 6 lines
Quoted 1 line
TBH I'm still not sure which one I prefer...
Claire did implement something like your suggestion originally, but I don't really like it as it doesn't scale for adding multiple global pools, e.g. for the 64-bit addressable one for the various encrypted secure guest schemes.
Quoted 4 lines
Couple of things:
- I am not pushing to Linus the Claire's patchset until we have a resolution on this. I hope you all agree that is a sensible way forward as much as I hate doing that.
Quoted 5 lines
Sure, it's a pity but we could clearly use a bit more time to get these just right and we've run out of time for 5.14.
I think the main question I have is how would you like to see patches for 5.15? i.e. as patches on top of devel/for-linus-5.14 or something else?
Yes that would be perfect. If there are any dependencies on the rc1, I can rebase it on top of that.
Quoted 4 lines
Cheers,
Will
Will Deacon
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 21 lines · Konrad Rzeszutek Wilk
Quoted 20 lines · Will Deacon
Quoted 18 lines · Konrad Rzeszutek Wilk
Quoted 6 lines · Christoph Hellwig
Quoted 5 lines · Robin Murphy
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
Quoted 6 lines
Quoted 1 line
TBH I'm still not sure which one I prefer...
Claire did implement something like your suggestion originally, but I don't really like it as it doesn't scale for adding multiple global pools, e.g. for the 64-bit addressable one for the various encrypted secure guest schemes.
Couple of things:
- I am not pushing to Linus the Claire's patchset until we have a resolution on this. I hope you all agree that is a sensible way forward as much as I hate doing that.
Quoted 8 lines
Quoted 5 lines
Sure, it's a pity but we could clearly use a bit more time to get these just right and we've run out of time for 5.14.
I think the main question I have is how would you like to see patches for 5.15? i.e. as patches on top of devel/for-linus-5.14 or something else?
Yes that would be perfect. If there are any dependencies on the rc1, I can rebase it on top of that.
Yes, please, rebasing would be very helpful. The broader rework of 'io_tlb_default_mem' is going to conflict quite badly otherwise.
Cheers,
Will
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
..snip..
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
I think the main question I have is how would you like to see patches for 5.15? i.e. as patches on top of devel/for-linus-5.14 or something else?
Yes that would be perfect. If there are any dependencies on the rc1, I can rebase it on top of that.
Yes, please, rebasing would be very helpful. The broader rework of '
io_tlb_default_mem' is going to conflict quite badly otherwise.
There is a devel/for-linus-5.15 (based on v5.14-rc1) now.
Thank you!
Quoted 4 lines
Cheers,
Will
Robin Murphy
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
In reply to Christoph HellwigQuoted 6 lines · Christoph Hellwig
Quoted 5 lines · Robin Murphy
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
Quoted 6 lines
Quoted 1 line
TBH I'm still not sure which one I prefer...
Claire did implement something like your suggestion originally, but I don't really like it as it doesn't scale for adding multiple global pools, e.g. for the 64-bit addressable one for the various encrypted secure guest schemes.
Ah yes, that had slipped my mind, and it's a fair point indeed. Since we're not concerned with a minimal fix for backports anyway I'm more than happy to focus on Will's approach. Another thing is that that looks to take us a quiet step closer to the possibility of dynamically resizing a SWIOTLB pool, which is something that some of the hypervisor protection schemes looking to build on top of this series may want to explore at some point.
Robin.
Will Deacon
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 14 lines · Robin Murphy
Quoted 6 lines · Christoph Hellwig
Quoted 5 lines · Robin Murphy
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
Quoted 6 lines
Quoted 1 line
TBH I'm still not sure which one I prefer...
Claire did implement something like your suggestion originally, but I don't really like it as it doesn't scale for adding multiple global pools, e.g. for the 64-bit addressable one for the various encrypted secure guest schemes.
Quoted 6 lines
Ah yes, that had slipped my mind, and it's a fair point indeed. Since we're not concerned with a minimal fix for backports anyway I'm more than happy to focus on Will's approach. Another thing is that that looks to take us a quiet step closer to the possibility of dynamically resizing a SWIOTLB pool, which is something that some of the hypervisor protection schemes looking to build on top of this series may want to explore at some point.
Ok, I'll split that nasty diff I posted up into a reviewable series and we can take it from there.
Will
Re: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Hi Will and Robin,
Quoted 22 lines · Will Deacon
Quoted 14 lines · Robin Murphy
Quoted 6 lines · Christoph Hellwig
Quoted 5 lines · Robin Murphy
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
Quoted 6 lines
Quoted 1 line
TBH I'm still not sure which one I prefer...
Claire did implement something like your suggestion originally, but I don't really like it as it doesn't scale for adding multiple global pools, e.g. for the 64-bit addressable one for the various encrypted secure guest schemes.
Quoted 6 lines
Ah yes, that had slipped my mind, and it's a fair point indeed. Since we're not concerned with a minimal fix for backports anyway I'm more than happy to focus on Will's approach. Another thing is that that looks to take us a quiet step closer to the possibility of dynamically resizing a SWIOTLB pool, which is something that some of the hypervisor protection schemes looking to build on top of this series may want to explore at some point.
Quoted 2 lines
Ok, I'll split that nasty diff I posted up into a reviewable series and we can take it from there.
For what it's worth, I attempted to boot Will's diff on top of Konrad's devel/for-linus-5.14 and it did not work; in fact, I got no output on my monitor period, even with earlyprintk=, and I do not think this machine has a serial console.
Robin's fix does work, it survived ten reboots with no issues getting to X and I do not see the KASAN and slub debug messages anymore but I understand that this is not the preferred solution it seems (although Konrad did want to know if it works).
I am happy to test any further patches or follow ups as needed, just keep me on CC.
Cheers,
Nathan
Will Deacon
maintainerRe: [PATCH v15 06/12] swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
Quoted 23 lines · Nathan Chancellor
Quoted 22 lines · Will Deacon
Quoted 20 lines · Robin Murphy
Quoted 6 lines · Christoph Hellwig
Quoted 5 lines · Robin Murphy
FWIW I was pondering the question of whether to do something along those lines or just scrap the default assignment entirely, so since I hadn't got round to saying that I've gone ahead and hacked up the alternative (similarly untested) for comparison :)
Quoted 6 lines
Quoted 1 line
TBH I'm still not sure which one I prefer...
Claire did implement something like your suggestion originally, but I don't really like it as it doesn't scale for adding multiple global pools, e.g. for the 64-bit addressable one for the various encrypted secure guest schemes.
Ah yes, that had slipped my mind, and it's a fair point indeed. Since we're not concerned with a minimal fix for backports anyway I'm more than happy to focus on Will's approach. Another thing is that that looks to take us a quiet step closer to the possibility of dynamically resizing a SWIOTLB pool, which is something that some of the hypervisor protection schemes looking to build on top of this series may want to explore at some point.
Quoted 7 lines
Quoted 2 lines
Ok, I'll split that nasty diff I posted up into a reviewable series and we can take it from there.
For what it's worth, I attempted to boot Will's diff on top of Konrad's devel/for-linus-5.14 and it did not work; in fact, I got no output on my monitor period, even with earlyprintk=, and I do not think this machine has a serial console.
Looking back at the diff, I completely messed up swiotlb_exit() by mixing up physical and virtual addresses.
Quoted 7 lines
Robin's fix does work, it survived ten reboots with no issues getting to X and I do not see the KASAN and slub debug messages anymore but I understand that this is not the preferred solution it seems (although Konrad did want to know if it works).
I am happy to test any further patches or follow ups as needed, just keep me on CC.
Cheers. Since this isn't 5.14 material any more, I'll CC you on a series next week.
Will
PATCH v15 7/12 swiotlb: Move alloc_size to swiotlb_find_slots
In reply to Claire ChangRename find_slots to swiotlb_find_slots and move the maintenance of alloc_size to it for better code reusability later.
--- kernel/dma/swiotlb.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)
kernel/dma/swiotlb.c +9 -8
@@ -432,8 +432,8 @@ static unsigned int wrap_index(struct io_tlb_mem *mem, unsigned int index)* Find a suitable number of IO TLB entries size that will fit this request and * allocate a buffer from that IO TLB pool. */ -static int find_slots (struct device *dev,phys_addr_t orig_addr, -size_t alloc_size) +static int swiotlb_find_slots (struct device *dev,phys_addr_t orig_addr, +size_t alloc_size) {struct io_tlb_mem *mem = dev->dma_io_tlb_mem;unsigned long boundary_mask =dma_get_seg_boundary (dev);
@@ -444,6 +444,7 @@ static int find_slots(struct device *dev, phys_addr_t orig_addr,dma_get_min_align_mask (dev) & ~(IO_TLB_SIZE -1 );unsigned int nslots =nr_slots (alloc_size), stride;unsigned int index, wrap, count =0 , i; +unsigned int offset =swiotlb_align_offset (dev, orig_addr);unsigned long flags;BUG_ON (!nslots);
@@ -488,8 +489,11 @@ static int find_slots(struct device *dev, phys_addr_t orig_addr,return -1 ; found: -for (i = index; i < index + nslots; i++) +for (i = index; i < index + nslots; i++) { mem->slots[i].list =0 ; + mem->slots[i].alloc_size = + alloc_size - (offset + ((i - index) <<IO_TLB_SHIFT )); + }for (i = index -1 ;io_tlb_offset (i) !=IO_TLB_SEGSIZE -1 && mem->slots[i].list; i--)
@@ -530,7 +534,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,return (phys_addr_t )DMA_MAPPING_ERROR ; } - index =find_slots (dev, orig_addr, alloc_size + offset); + index =swiotlb_find_slots (dev, orig_addr, alloc_size + offset);if (index ==-1 ) {if (!(attrs &DMA_ATTR_NO_WARN )) dev_warn_ratelimited(dev,
@@ -544,11 +548,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,* This is needed when we sync the memory. Then we sync the buffer if * needed. */ -for (i =0 ; i <nr_slots (alloc_size + offset); i++) { +for (i =0 ; i <nr_slots (alloc_size + offset); i++) mem->slots[index + i].orig_addr =slot_addr (orig_addr, i); - mem->slots[index + i].alloc_size = - alloc_size - (i <<IO_TLB_SHIFT ); - } tlb_addr =slot_addr (mem->start, index) + offset;if (!(attrs &DMA_ATTR_SKIP_CPU_SYNC ) && (dir ==DMA_TO_DEVICE || dir ==DMA_BIDIRECTIONAL ))
Signature · 1 line
2.32.0.288.g62a8d224e6-goog
PATCH v15 8/12 swiotlb: Refactor swiotlb_tbl_unmap_single
In reply to Claire ChangAdd a new function, swiotlb_release_slots, to make the code reusable for supporting different bounce buffer pools.
--- kernel/dma/swiotlb.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-)
kernel/dma/swiotlb.c +20 -15
@@ -557,27 +557,15 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,return tlb_addr; } -/* -* tlb_addr is the physical address of the bounce buffer to unmap. -*/ -void swiotlb_tbl_unmap_single (struct device *hwdev,phys_addr_t tlb_addr, -size_t mapping_size,enum dma_data_direction dir, -unsigned long attrs) +static void swiotlb_release_slots (struct device *dev,phys_addr_t tlb_addr) { -struct io_tlb_mem *mem = hwdev->dma_io_tlb_mem; +struct io_tlb_mem *mem = dev->dma_io_tlb_mem;unsigned long flags; -unsigned int offset =swiotlb_align_offset (hwdev, tlb_addr); +unsigned int offset =swiotlb_align_offset (dev, tlb_addr);int index = (tlb_addr - offset - mem->start) >>IO_TLB_SHIFT ;int nslots =nr_slots (mem->slots[index].alloc_size + offset);int count, i; -/* -* First, sync the memory before unmapping the entry -*/ -if (!(attrs &DMA_ATTR_SKIP_CPU_SYNC ) && - (dir ==DMA_FROM_DEVICE || dir ==DMA_BIDIRECTIONAL )) -swiotlb_bounce (hwdev, tlb_addr, mapping_size,DMA_FROM_DEVICE ); -/* * Return the buffer to the free list by setting the corresponding * entries to indicate the number of contiguous entries available.
@@ -612,6 +600,23 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,spin_unlock_irqrestore (&mem->lock, flags); } +/* +* tlb_addr is the physical address of the bounce buffer to unmap. +*/ +void swiotlb_tbl_unmap_single (struct device *dev,phys_addr_t tlb_addr, +size_t mapping_size,enum dma_data_direction dir, +unsigned long attrs) +{ +/* +* First, sync the memory before unmapping the entry +*/ +if (!(attrs &DMA_ATTR_SKIP_CPU_SYNC ) && + (dir ==DMA_FROM_DEVICE || dir ==DMA_BIDIRECTIONAL )) +swiotlb_bounce (dev, tlb_addr, mapping_size,DMA_FROM_DEVICE ); + +swiotlb_release_slots (dev, tlb_addr); +} +void swiotlb_sync_single_for_device (struct device *dev,phys_addr_t tlb_addr,size_t size,enum dma_data_direction dir) {
Signature · 6 lines
2.32.0.288.g62a8d224e6-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 9/12 swiotlb: Add restricted DMA alloc/free support
In reply to Claire ChangAdd the functions, swiotlb_{alloc,free} and is_swiotlb_for_alloc to support the memory allocation from restricted DMA pool.
The restricted DMA pool is preferred if available.
Note that since coherent allocation needs remapping, one must set up another device coherent pool by shared-dma-pool and use dma_alloc_from_dev_coherent instead for atomic coherent allocation.
--- include/linux/swiotlb.h | 26 ++++++++++++++++++++++ kernel/dma/direct.c | 49 +++++++++++++++++++++++++++++++---------- kernel/dma/swiotlb.c | 38 ++++++++++++++++++++++++++++++-- 3 files changed, 99 insertions(+), 14 deletions(-)
include/linux/swiotlb.h +26 -0
@@ -85,6 +85,7 @@ extern enum swiotlb_force swiotlb_force;* @debugfs: The dentry to debugfs. * @late_alloc: %true if allocated using the page allocator * @force_bounce: %true if swiotlb bouncing is forced +* @for_alloc: %true if the pool is used for memory allocation */ struct io_tlb_mem {phys_addr_t start;
@@ -96,6 +97,7 @@ struct io_tlb_mem {struct dentry *debugfs;bool late_alloc;bool force_bounce; +bool for_alloc;struct io_tlb_slot {phys_addr_t orig_addr;size_t alloc_size;
@@ -158,4 +160,28 @@ static inline void swiotlb_adjust_size(unsigned long size)extern void swiotlb_print_info (void );extern void swiotlb_set_max_segment (unsigned int ); +#ifdef CONFIG_DMA_RESTRICTED_POOL +struct page *swiotlb_alloc (struct device *dev,size_t size); +bool swiotlb_free (struct device *dev,struct page *page,size_t size); + +static inline bool is_swiotlb_for_alloc (struct device *dev) +{ +return dev->dma_io_tlb_mem->for_alloc; +} +#else +static inline struct page *swiotlb_alloc (struct device *dev,size_t size) +{ +return NULL ; +} +static inline bool swiotlb_free (struct device *dev,struct page *page, +size_t size) +{ +return false; +} +static inline bool is_swiotlb_for_alloc (struct device *dev) +{ +return false; +} +#endif /* CONFIG_DMA_RESTRICTED_POOL */ +#endif /* __LINUX_SWIOTLB_H */
kernel/dma/direct.c +37 -12
124 lines not on this page · raw message
kernel/dma/swiotlb.c +36 -2
@@ -464,8 +464,9 @@ static int swiotlb_find_slots(struct device *dev, phys_addr_t orig_addr, index = wrap =wrap_index (mem,ALIGN (mem->index, stride)); do { - if ((slot_addr(tbl_dma_addr, index) & iotlb_align_mask) != - (orig_addr & iotlb_align_mask)) { + if (orig_addr && + (slot_addr(tbl_dma_addr, index) & iotlb_align_mask) != + (orig_addr & iotlb_align_mask)) { index = wrap_index(mem, index + 1); continue; }
@@ -704,3 +705,36 @@ static int __init swiotlb_create_default_debugfs(void)late_initcall (swiotlb_create_default_debugfs);#endif + +#ifdef CONFIG_DMA_RESTRICTED_POOL +struct page *swiotlb_alloc (struct device *dev,size_t size) +{ +struct io_tlb_mem *mem = dev->dma_io_tlb_mem; +phys_addr_t tlb_addr; +int index; + +if (!mem) +return NULL ; + + index =swiotlb_find_slots (dev,0 , size); +if (index ==-1 ) +return NULL ; + + tlb_addr =slot_addr (mem->start, index); + +return pfn_to_page (PFN_DOWN (tlb_addr)); +} + +bool swiotlb_free (struct device *dev,struct page *page,size_t size) +{ +phys_addr_t tlb_addr =page_to_phys (page); + +if (!is_swiotlb_buffer (dev, tlb_addr)) +return false; + +swiotlb_release_slots (dev, tlb_addr); + +return true; +} + +#endif /* CONFIG_DMA_RESTRICTED_POOL */
Signature · 6 lines
2.32.0.288.g62a8d224e6-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 10/12 swiotlb: Add restricted DMA pool initialization
In reply to Claire ChangAdd the initialization function to create restricted DMA pools from matching reserved-memory nodes.
Regardless of swiotlb setting, the restricted DMA pool is preferred if available.
The restricted DMA pools provide a basic level of protection against the DMA overwriting buffer contents at unexpected times. However, to protect against general data leakage and system memory corruption, the system needs to provide a way to lock down the memory access, e.g., MPU.
--- include/linux/swiotlb.h | 3 +- kernel/dma/Kconfig | 14 ++++++++ kernel/dma/swiotlb.c | 76 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 92 insertions(+), 1 deletion(-)
include/linux/swiotlb.h +2 -1
@@ -73,7 +73,8 @@ extern enum swiotlb_force swiotlb_force;* range check to see if the memory was in fact allocated by this * API. * @nslabs: The number of IO TLB blocks (in groups of 64) between @start and -* @end. This is command line adjustable via setup_io_tlb_npages. +* @end. For default swiotlb, this is command line adjustable via +* setup_io_tlb_npages. * @used: The number of used IO TLB block. * @list: The free list describing the number of free entries available * from each index.
kernel/dma/Kconfig +14 -0
@@ -80,6 +80,20 @@ config SWIOTLB bool select NEED_DMA_MAP_STATE +config DMA_RESTRICTED_POOL + bool "DMA Restricted Pool" + depends on OF && OF_RESERVED_MEM + select SWIOTLB + help + This enables support for restricted DMA pools which provide a level of + DMA memory protection on systems with limited hardware protection + capabilities, such as those lacking an IOMMU. + + For more information see + <Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt> + and <kernel/dma/swiotlb.c>. + If unsure, say "n". + # # Should be selected if we can mmap non-coherent mappings to userspace. # The only thing that is really required is a way to set an uncached bit
kernel/dma/swiotlb.c +76 -0
86 lines not on this page · raw message
Signature · 6 lines
2.32.0.288.g62a8d224e6-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v15 10/12] swiotlb: Add restricted DMA pool initialization
Hi Claire,
Quoted 40 lines · Claire Chang
Add the initialization function to create restricted DMA pools from matching reserved-memory nodes.
Regardless of swiotlb setting, the restricted DMA pool is preferred if available.
The restricted DMA pools provide a basic level of protection against the DMA overwriting buffer contents at unexpected times. However, to protect against general data leakage and system memory corruption, the system needs to provide a way to lock down the memory access, e.g., MPU.
Signed-off-by Claire Chang <[email protected]>Reviewed-by Christoph Hellwig <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>--- include/linux/swiotlb.h | 3 +- kernel/dma/Kconfig | 14 ++++++++ kernel/dma/swiotlb.c | 76 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 92 insertions(+), 1 deletion(-)include/linux/swiotlb.h +2
-1@@ -73,7 +73,8 @@ extern enum swiotlb_force swiotlb_force;* range check to see if the memory was in fact allocated by this * API. * @nslabs: The number of IO TLB blocks (in groups of 64) between @start and -* @end. This is command line adjustable via setup_io_tlb_npages. +* @end. For default swiotlb, this is command line adjustable via +* setup_io_tlb_npages. * @used: The number of used IO TLB block. * @list: The free list describing the number of free entries available * from each index. kernel/dma/Kconfig +0
-0
kernel/dma/Kconfig config SWIOTLB · line 86
Quoted 7 lines
kernel/dma/Kconfig +4
-0@@ -80,6 +80,20 @@ config SWIOTLB bool select NEED_DMA_MAP_STATE +config DMA_RESTRICTED_POOL + bool "DMA Restricted Pool" + depends on OF && OF_RESERVED_MEM + select SWIOTLB
This makes SWIOTLB user configurable, which in turn results in
mips64-linux-ld: arch/mips/kernel/setup.o: in function `arch_mem_init':
setup.c:(.init.text+0x19c8): undefined reference to `plat_swiotlb_setup' make[1]: *** [Makefile:1280: vmlinux] Error 1
when building mips:allmodconfig.
Should this possibly be "depends on SWIOTLB" ?
Thanks,
Guenter
Re: [PATCH v15 10/12] swiotlb: Add restricted DMA pool initialization
Quoted 54 lines · Guenter Roeck
Hi Claire,
Quoted 40 lines · Claire Chang
Add the initialization function to create restricted DMA pools from matching reserved-memory nodes.
Regardless of swiotlb setting, the restricted DMA pool is preferred if available.
The restricted DMA pools provide a basic level of protection against the DMA overwriting buffer contents at unexpected times. However, to protect against general data leakage and system memory corruption, the system needs to provide a way to lock down the memory access, e.g., MPU.
Signed-off-by Claire Chang <[email protected]>Reviewed-by Christoph Hellwig <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>--- include/linux/swiotlb.h | 3 +- kernel/dma/Kconfig | 14 ++++++++ kernel/dma/swiotlb.c | 76 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 92 insertions(+), 1 deletion(-)include/linux/swiotlb.h +2
-1@@ -73,7 +73,8 @@ extern enum swiotlb_force swiotlb_force;* range check to see if the memory was in fact allocated by this * API. * @nslabs: The number of IO TLB blocks (in groups of 64) between @start and -* @end. This is command line adjustable via setup_io_tlb_npages. +* @end. For default swiotlb, this is command line adjustable via +* setup_io_tlb_npages. * @used: The number of used IO TLB block. * @list: The free list describing the number of free entries available * from each index. kernel/dma/Kconfig +0
-0kernel/dma/Kconfig config SWIOTLB · line 86
Quoted 7 lines
kernel/dma/Kconfig +4
-0@@ -80,6 +80,20 @@ config SWIOTLB bool select NEED_DMA_MAP_STATE +config DMA_RESTRICTED_POOL + bool "DMA Restricted Pool" + depends on OF && OF_RESERVED_MEM + select SWIOTLBThis makes SWIOTLB user configurable, which in turn results in
Quoted 7 lines
mips64-linux-ld:
arch/mips/kernel/setup.o: in function `arch_mem_init':
setup.c:(.init.text+0x19c8): undefined reference to `plat_swiotlb_setup' make[1]: *** [Makefile:1280: vmlinux] Error 1when building mips:allmodconfig.
Should this possibly be "depends on SWIOTLB" ?
Patch is sent here: https://lkml.org/lkml/2021/8/26/932
Quoted 3 lines
Thanks,
Guenter
Thanks,
Claire
Re: [PATCH v15 10/12] swiotlb: Add restricted DMA pool initialization
In reply to Claire ChangQuoted 19 lines · Claire Chang
Add the initialization function to create restricted DMA pools from matching reserved-memory nodes.
Regardless of swiotlb setting, the restricted DMA pool is preferred if available.
The restricted DMA pools provide a basic level of protection against the DMA overwriting buffer contents at unexpected times. However, to protect against general data leakage and system memory corruption, the system needs to provide a way to lock down the memory access, e.g., MPU.
kernel/dma/swiotlb.c +3
-0+static int rmem_swiotlb_device_init (struct reserved_mem *rmem, +struct device *dev) +{
kernel/dma/swiotlb.c bool swiotlb_free(struct device *dev, struct page *page, size_t size) · line 758
Quoted 10 lines
kernel/dma/swiotlb.c +9
-0+struct io_tlb_mem *mem = rmem->priv; +unsigned long nslabs = rmem->size >>IO_TLB_SHIFT ; + +/* +* Since multiple devices can share the same pool, the private data, +* io_tlb_mem struct, will be initialized by the first device attached +* to it. +*/ +if (!mem) {
Can it be rather
if (mem)
goto out_assign;
or so?
kernel/dma/swiotlb.c bool swiotlb_free(struct device *dev, struct page *page, size_t size) · line 764
Quoted 6 lines
kernel/dma/swiotlb.c +6
-0+ mem =kzalloc (struct_size (mem, slots, nslabs),GFP_KERNEL ); +if (!mem) +return -ENOMEM ; + +set_memory_decrypted ((unsigned long )phys_to_virt (rmem->base), + rmem->size >>PAGE_SHIFT );
Below you are using a macro from pfn.h, but not here, I think it's PFN_DOWN().
Quoted 37 lines
kernel/dma/swiotlb.c +37
-0+swiotlb_init_io_tlb_mem (mem, rmem->base, nslabs, false); + mem->force_bounce = true; + mem->for_alloc = true; + + rmem->priv = mem; + +if (IS_ENABLED (CONFIG_DEBUG_FS )) { + mem->debugfs = +debugfs_create_dir (rmem->name, debugfs_dir); +swiotlb_create_debugfs_files (mem); + } + } + + dev->dma_io_tlb_mem = mem; + +return 0 ; +} + +static void rmem_swiotlb_device_release (struct reserved_mem *rmem, +struct device *dev) +{ + dev->dma_io_tlb_mem = io_tlb_default_mem; +} + +static const struct reserved_mem_ops rmem_swiotlb_ops = { + .device_init = rmem_swiotlb_device_init, + .device_release = rmem_swiotlb_device_release, +}; + +static int __init rmem_swiotlb_setup (struct reserved_mem *rmem) +{ +unsigned long node = rmem->fdt_node; + +if (of_get_flat_dt_prop (node,"reusable" ,NULL ) || +of_get_flat_dt_prop (node,"linux,cma-default" ,NULL ) || +of_get_flat_dt_prop (node,"linux,dma-default" ,NULL ) || +of_get_flat_dt_prop (node,"no-map" ,NULL ))
kernel/dma/swiotlb.c bool swiotlb_free(struct device *dev, struct page *page, size_t size) · line 811
Quoted 10 lines
kernel/dma/swiotlb.c +10
-0+return -EINVAL ; + +if (PageHighMem (pfn_to_page (PHYS_PFN (rmem->base)))) { +pr_err ("Restricted DMA pool must be accessible within the linear mapping." ); +return -EINVAL ; + } + + rmem->ops = &rmem_swiotlb_ops; +pr_info ("Reserved memory: created restricted DMA pool at %pa, size %ld MiB\n" , + &rmem->base, (unsigned long )rmem->size /SZ_1M );
Oh là là, besides explicit casting that I believe can be avoided, %ld != unsigned long. Can you check the printk-formats.rst document?
Quoted 5 lines
kernel/dma/swiotlb.c +4
-0+ return 0; +} + +RESERVEDMEM_OF_DECLARE (dma,"restricted-dma-pool" , rmem_swiotlb_setup);#endif /* CONFIG_DMA_RESTRICTED_POOL */
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH v15 11/12 dt-bindings: of: Add restricted DMA pool
In reply to Claire ChangIntroduce the new compatible string, restricted-dma-pool, for restricted DMA. One can specify the address and length of the restricted DMA memory region by restricted-dma-pool in the reserved-memory node.
--- .../reserved-memory/reserved-memory.txt | 36 +++++++++++++++++-- 1 file changed, 33 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt +33 -3
@@ -51,6 +51,23 @@ compatible (optional) - standard definition used as a shared pool of DMA buffers for a set of devices. It can be used by an operating system to instantiate the necessary pool management subsystem if necessary. + - restricted-dma-pool: This indicates a region of memory meant to be + used as a pool of restricted DMA buffers for a set of devices. The + memory region would be the only region accessible to those devices. + When using this, the no-map and reusable properties must not be set, + so the operating system can create a virtual mapping that will be used + for synchronization. The main purpose for restricted DMA is to + mitigate the lack of DMA access control on systems without an IOMMU, + which could result in the DMA accessing the system memory at + unexpected times and/or unexpected addresses, possibly leading to data + leakage or corruption. The feature on its own provides a basic level + of protection against the DMA overwriting buffer contents at + unexpected times. However, to protect against general data leakage and + system memory corruption, the system needs to provide way to lock down + the memory access, e.g., MPU. Note that since coherent allocation + needs remapping, one must set up another device coherent pool by + shared-dma-pool and use dma_alloc_from_dev_coherent instead for atomic + coherent allocation. - vendor specific string in the form <vendor>,[<device>-]<usage> no-map (optional) - empty property - Indicates the operating system must not create a virtual mapping
@@ -85,10 +102,11 @@ memory-region-names (optional) - a list of names, one for each corresponding Example ------- -This example defines 3 contiguous regions are defined for Linux kernel: +This example defines 4 contiguous regions for Linux kernel: one default of all device drivers (named linux,cma@72000000 and 64MiB in size), -one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and -one for multimedia processing (named multimedia-memory@77000000, 64MiB). +one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), +one for multimedia processing (named multimedia-memory@77000000, 64MiB), and +one for restricted dma pool (named restricted_dma_reserved@0x50000000, 64MiB). / { #address-cells = <1>;
@@ -120,6 +138,11 @@ one for multimedia processing (named multimedia-memory@77000000, 64MiB). compatible = "acme,multimedia-memory"; reg = <0x77000000 0x4000000>; }; + + restricted_dma_reserved: restricted_dma_reserved { + compatible = "restricted-dma-pool"; + reg = <0x50000000 0x4000000>; + }; }; /* ... */
@@ -138,4 +161,11 @@ one for multimedia processing (named multimedia-memory@77000000, 64MiB). memory-region = <&multimedia_reserved>; /* ... */ }; + + pcie_device: pcie_device@0,0 { + reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 + 0x83010000 0x0 0x00100000 0x0 0x00100000>; + memory-region = <&restricted_dma_reserved>; + /* ... */ + }; };
Signature · 1 line
2.32.0.288.g62a8d224e6-goog
PATCH v15 12/12 of: Add plumbing for restricted DMA pool
In reply to Claire ChangIf a device is not behind an IOMMU, we look up the device node and set up the restricted DMA when the restricted-dma-pool is presented.
--- drivers/of/address.c | 33 +++++++++++++++++++++++++++++++++ drivers/of/device.c | 3 +++ drivers/of/of_private.h | 6 ++++++ 3 files changed, 42 insertions(+)
drivers/of/address.c +33 -0
@@ -8,6 +8,7 @@#include <linux/logic_pio.h> #include <linux/module.h> #include <linux/of_address.h> +#include <linux/of_reserved_mem.h> #include <linux/pci.h> #include <linux/pci_regs.h> #include <linux/sizes.h>
@@ -1022,6 +1023,38 @@ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map)of_node_put (node);return ret; } + +int of_dma_set_restricted_buffer (struct device *dev,struct device_node *np) +{ +struct device_node *node, *of_node = dev->of_node; +int count, i; + + count =of_property_count_elems_of_size (of_node,"memory-region" , +sizeof (u32)); +/* +* If dev->of_node doesn't exist or doesn't contain memory-region, try +* the OF node having DMA configuration. +*/ +if (count <=0 ) { + of_node = np; + count =of_property_count_elems_of_size ( + of_node,"memory-region" ,sizeof (u32)); + } + +for (i =0 ; i < count; i++) { + node =of_parse_phandle (of_node,"memory-region" , i); +/* +* There might be multiple memory regions, but only one +* restricted-dma-pool region is allowed. +*/ +if (of_device_is_compatible (node,"restricted-dma-pool" ) && +of_device_is_available (node)) +return of_reserved_mem_device_init_by_idx (dev, of_node, + i); + } + +return 0 ; +}#endif /* CONFIG_HAS_DMA */ /**
drivers/of/device.c +3 -0
@@ -165,6 +165,9 @@ int of_dma_configure_id(struct device *dev, struct device_node *np,arch_setup_dma_ops (dev, dma_start, size, iommu, coherent); +if (!iommu) +return of_dma_set_restricted_buffer (dev, np); +return 0 ; }EXPORT_SYMBOL_GPL (of_dma_configure_id);
drivers/of/of_private.h +6 -0
@@ -161,12 +161,18 @@ struct bus_dma_region;#if defined(CONFIG_OF_ADDRESS ) && defined(CONFIG_HAS_DMA )int of_dma_get_range (struct device_node *np,const struct bus_dma_region **map); +int of_dma_set_restricted_buffer (struct device *dev,struct device_node *np);#else static inline int of_dma_get_range (struct device_node *np,const struct bus_dma_region **map) {return -ENODEV ; } +static inline int of_dma_set_restricted_buffer (struct device *dev, +struct device_node *np) +{ +return -ENODEV ; +}#endif #endif /* _LINUX_OF_PRIVATE_H */
Signature · 6 lines
2.32.0.288.g62a8d224e6-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v15 12/12] of: Add plumbing for restricted DMA pool
Hi,
Quoted 6 lines · Claire Chang
If a device is not behind an IOMMU, we look up the device node and set up the restricted DMA when the restricted-dma-pool is presented.
Signed-off-by Claire Chang <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>
With this patch in place, all sparc and sparc64 qemu emulations fail to boot. Symptom is that the root file system is not found. Reverting this patch fixes the problem. Bisect log is attached.
Guenter
---
# bad: [fb0ca446157a86b75502c1636b0d81e642fe6bf1] Add linux-next specific files for 20210701
# good: [62fb9874f5da54fdb243003b386128037319b219] Linux 5.13
git bisect start 'HEAD' 'v5.13'
# bad: [f63c4fda987a19b1194cc45cb72fd5bf968d9d90] Merge remote-tracking branch 'rdma/for-next'
git bisect bad f63c4fda987a19b1194cc45cb72fd5bf968d9d90
# good: [46bb5dd1d2a63e906e374e97dfd4a5e33934b1c4] Merge remote-tracking branch 'ipsec/master'
git bisect good 46bb5dd1d2a63e906e374e97dfd4a5e33934b1c4
# good: [43ba6969cfb8185353a7a6fc79070f13b9e3d6d3] Merge remote-tracking branch 'clk/clk-next'
git bisect good 43ba6969cfb8185353a7a6fc79070f13b9e3d6d3
# good: [1ca5eddcf8dca1d6345471c6404e7364af0d7019] Merge remote-tracking branch 'fuse/for-next'
git bisect good 1ca5eddcf8dca1d6345471c6404e7364af0d7019
# good: [8f6d7b3248705920187263a4e7147b0752ec7dcf] Merge remote-tracking branch 'pci/next'
git bisect good 8f6d7b3248705920187263a4e7147b0752ec7dcf
# good: [df1885a755784da3ef285f36d9230c1d090ef186] RDMA/rtrs_clt: Alloc less memory with write path fast memory registration git bisect good df1885a755784da3ef285f36d9230c1d090ef186
# good: [93d31efb58c8ad4a66bbedbc2d082df458c04e45] Merge remote-tracking branch 'cpufreq-arm/cpufreq/arm/linux-next' git bisect good 93d31efb58c8ad4a66bbedbc2d082df458c04e45
# good: [46308965ae6fdc7c25deb2e8c048510ae51bbe66] RDMA/irdma: Check contents of user-space irdma_mem_reg_req object git bisect good 46308965ae6fdc7c25deb2e8c048510ae51bbe66
# good: [6de7a1d006ea9db235492b288312838d6878385f] thermal/drivers/int340x/processor_thermal: Split enumeration and processing part git bisect good 6de7a1d006ea9db235492b288312838d6878385f
# good: [081bec2577cda3d04f6559c60b6f4e2242853520] dt-bindings: of: Add restricted DMA pool
git bisect good 081bec2577cda3d04f6559c60b6f4e2242853520
# good: [bf95ac0bcd69979af146852f6a617a60285ebbc1] Merge remote-tracking branch 'thermal/thermal/linux-next' git bisect good bf95ac0bcd69979af146852f6a617a60285ebbc1
# good: [3d8287544223a3d2f37981c1f9ffd94d0b5e9ffc] RDMA/core: Always release restrack object
git bisect good 3d8287544223a3d2f37981c1f9ffd94d0b5e9ffc
# bad: [cff1f23fad6e0bd7d671acce0d15285c709f259c] Merge remote-tracking branch 'swiotlb/linux-next'
git bisect bad cff1f23fad6e0bd7d671acce0d15285c709f259c
# bad: [b655006619b7bccd0dc1e055bd72de5d613e7b5c] of: Add plumbing for restricted DMA pool
git bisect bad b655006619b7bccd0dc1e055bd72de5d613e7b5c
# first bad commit: [b655006619b7bccd0dc1e055bd72de5d613e7b5c] of: Add plumbing for restricted DMA pool _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Robin Murphy
maintainerRe: [PATCH v15 12/12] of: Add plumbing for restricted DMA pool
Quoted 6 lines · Guenter Roeck
Hi,
Quoted 3 lines · Claire Chang
If a device is not behind an IOMMU, we look up the device node and set up the restricted DMA when the restricted-dma-pool is presented.
Quoted 7 lines
Quoted 3 lines
Signed-off-by Claire Chang <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>With this patch in place, all sparc and sparc64 qemu emulations fail to boot. Symptom is that the root file system is not found. Reverting this patch fixes the problem. Bisect log is attached.
Ah, OF_ADDRESS depends on !SPARC, so of_dma_configure_id() is presumably returning an unexpected -ENODEV from the of_dma_set_restricted_buffer() stub. That should probably be returning 0 instead, since either way it's not an error condition for it to simply do nothing.
Robin.
Quoted 37 lines
Guenter
---
# bad: [fb0ca446157a86b75502c1636b0d81e642fe6bf1] Add linux-next specific files for 20210701
# good: [62fb9874f5da54fdb243003b386128037319b219] Linux 5.13
git bisect start 'HEAD' 'v5.13'
# bad: [f63c4fda987a19b1194cc45cb72fd5bf968d9d90] Merge remote-tracking branch 'rdma/for-next'
git bisect badf63c4fda987a19b1194cc45cb72fd5bf968d9d90
# good: [46bb5dd1d2a63e906e374e97dfd4a5e33934b1c4] Merge remote-tracking branch 'ipsec/master'
git bisect good46bb5dd1d2a63e906e374e97dfd4a5e33934b1c4
# good: [43ba6969cfb8185353a7a6fc79070f13b9e3d6d3] Merge remote-tracking branch 'clk/clk-next'
git bisect good43ba6969cfb8185353a7a6fc79070f13b9e3d6d3
# good: [1ca5eddcf8dca1d6345471c6404e7364af0d7019] Merge remote-tracking branch 'fuse/for-next'
git bisect good1ca5eddcf8dca1d6345471c6404e7364af0d7019
# good: [8f6d7b3248705920187263a4e7147b0752ec7dcf] Merge remote-tracking branch 'pci/next'
git bisect good8f6d7b3248705920187263a4e7147b0752ec7dcf
# good: [df1885a755784da3ef285f36d9230c1d090ef186] RDMA/rtrs_clt: Alloc less memory with write path fast memory registration git bisect gooddf1885a755784da3ef285f36d9230c1d090ef186
# good: [93d31efb58c8ad4a66bbedbc2d082df458c04e45] Merge remote-tracking branch 'cpufreq-arm/cpufreq/arm/linux-next' git bisect good93d31efb58c8ad4a66bbedbc2d082df458c04e45
# good: [46308965ae6fdc7c25deb2e8c048510ae51bbe66] RDMA/irdma: Check contents of user-spaceirdma_mem_reg_reqobject git bisect good46308965ae6fdc7c25deb2e8c048510ae51bbe66
# good: [6de7a1d006ea9db235492b288312838d6878385f] thermal/drivers/int340x/processor_thermal: Split enumeration and processing part git bisect good6de7a1d006ea9db235492b288312838d6878385f
# good: [081bec2577cda3d04f6559c60b6f4e2242853520] dt-bindings: of: Add restricted DMA pool
git bisect good081bec2577cda3d04f6559c60b6f4e2242853520
# good: [bf95ac0bcd69979af146852f6a617a60285ebbc1] Merge remote-tracking branch 'thermal/thermal/linux-next' git bisect goodbf95ac0bcd69979af146852f6a617a60285ebbc1
# good: [3d8287544223a3d2f37981c1f9ffd94d0b5e9ffc] RDMA/core: Always release restrack object
git bisect good3d8287544223a3d2f37981c1f9ffd94d0b5e9ffc
# bad: [cff1f23fad6e0bd7d671acce0d15285c709f259c] Merge remote-tracking branch 'swiotlb/linux-next'
git bisect badcff1f23fad6e0bd7d671acce0d15285c709f259c
# bad: [b655006619b7bccd0dc1e055bd72de5d613e7b5c] of: Add plumbing for restricted DMA pool
git bisect badb655006619b7bccd0dc1e055bd72de5d613e7b5c# first bad commit: [b655006619b7bccd0dc1e055bd72de5d613e7b5c] of: Add plumbing for restricted DMA pool
Will Deacon
maintainerRe: [PATCH v15 12/12] of: Add plumbing for restricted DMA pool
Quoted 9 lines · Robin Murphy
Quoted 8 lines · Guenter Roeck
Quoted 6 lines · Claire Chang
If a device is not behind an IOMMU, we look up the device node and set up the restricted DMA when the restricted-dma-pool is presented.
Signed-off-by Claire Chang <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>
Quoted 8 lines
Quoted 3 lines
With this patch in place, all sparc and sparc64 qemu emulations fail to boot. Symptom is that the root file system is not found. Reverting this patch fixes the problem. Bisect log is attached.
Ah,
OF_ADDRESSdepends on !SPARC, soof_dma_configure_id()is presumably returning an unexpected-ENODEVfrom theof_dma_set_restricted_buffer()stub. That should probably be returning 0 instead, since either way it's not an error condition for it to simply do nothing.
Something like below?
Will
--->8
From 4d9dcb9210c1f37435b6088284e04b6b36ee8c4d Mon Sep 17 00:00:00 2001
From: Will Deacon <[email protected]>
Date: Fri, 2 Jul 2021 14:13:28 +0100
Subject: [PATCH] of: Return success from of_dma_set_restricted_buffer() when
!OF_ADDRESS
When CONFIG_OF_ADDRESS=n, of_dma_set_restricted_buffer() returns -ENODEV and breaks the boot for sparc[64] machines. Return 0 instead, since the function is essentially a glorified NOP in this configuration.
--- drivers/of/of_private.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/of/of_private.h +2 -1
@@ -173,7 +173,8 @@ static inline int of_dma_get_range(struct device_node *np,static inline int of_dma_set_restricted_buffer (struct device *dev,struct device_node *np) { -return -ENODEV ; +/* Do nothing, successfully. */ +return 0 ; }#endif
Signature · 1 line
2.32.0.93.g670b81a890-goog
Guenter Roeck
Tested-byRe: [PATCH v15 12/12] of: Add plumbing for restricted DMA pool
Quoted 14 lines · Will Deacon
Quoted 13 lines · Robin Murphy
Quoted 11 lines · Guenter Roeck
Quoted 6 lines · Claire Chang
If a device is not behind an IOMMU, we look up the device node and set up the restricted DMA when the restricted-dma-pool is presented.
Signed-off-by Claire Chang <[email protected]>Tested-by Stefano Stabellini <[email protected]>Tested-by Will Deacon <[email protected]>With this patch in place, all sparc and sparc64 qemu emulations fail to boot. Symptom is that the root file system is not found. Reverting this patch fixes the problem. Bisect log is attached.
Quoted 7 lines
Quoted 4 lines
Ah,
OF_ADDRESSdepends on !SPARC, soof_dma_configure_id()is presumably returning an unexpected-ENODEVfrom theof_dma_set_restricted_buffer()stub. That should probably be returning 0 instead, since either way it's not an error condition for it to simply do nothing.Something like below?
Yes, that does the trick.
Quoted 14 lines
Will
--->8
Quoted 1 line
From
4d9dcb9210c1f37435b6088284e04b6b36ee8c4dMon Sep 17 00:00:00 2001From: Will Deacon <[email protected]>
Date: Fri, 2 Jul 2021 14:13:28 +0100
Subject: [PATCH] of: Return success fromof_dma_set_restricted_buffer()when
!OF_ADDRESSWhen
CONFIG_OF_ADDRESS=n,of_dma_set_restricted_buffer()returns-ENODEVand breaks the boot for sparc[64] machines. Return 0 instead, since the function is essentially a glorified NOP in this configuration.
Quoted 6 lines
Cc Claire Chang <[email protected]>Cc Konrad Rzeszutek Wilk <[email protected]>Reported-by Guenter Roeck <[email protected]>Suggested-by Robin Murphy <[email protected]>Signed-off-by Will Deacon <[email protected]>
Quoted 19 lines
--- drivers/of/of_private.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/of/of_private.h +2
-1@@ -173,7 +173,8 @@ static inline int of_dma_get_range(struct device_node *np,static inline int of_dma_set_restricted_buffer (struct device *dev,struct device_node *np) { -return -ENODEV ; +/* Do nothing, successfully. */ +return 0 ; }#endif
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BUILD: failure for Restricted DMA
In reply to Claire Chang== Series Details ==
== Series Details ==
Series: Restricted DMA
URL : https://patchwork.freedesktop.org/series/91883/
State : failure
== Summary ==
Applying: swiotlb: Refactor swiotlb init functions
Applying: swiotlb: Refactor swiotlb_create_debugfs
Applying: swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used
error: sha1 information is lacking or useless (kernel/dma/swiotlb.c).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch=diff' to see the failed patch Patch failed at 0003 swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 26 lines · Claire Chang
This series implements mitigations for lack of DMA access control on systems without an IOMMU, which could result in the DMA accessing the system memory at unexpected times and/or unexpected addresses, possibly leading to data leakage or corruption.
For example, we plan to use the PCI-e bus for Wi-Fi and that PCI-e bus is not behind an IOMMU. As PCI-e, by design, gives the device full access to system memory, a vulnerability in the Wi-Fi firmware could easily escalate to a full system exploit (remote wifi exploits: [1a], [1b] that shows a full chain of exploits; [2], [3]).
To mitigate the security concerns, we introduce restricted DMA. Restricted DMA utilizes the existing swiotlb to bounce streaming DMA in and out of a specially allocated region and does memory allocation from the same region. The feature on its own provides a basic level of protection against the DMA overwriting buffer contents at unexpected times. However, to protect against general data leakage and system memory corruption, the system needs to provide a way to restrict the DMA to a predefined memory region (this is usually done at firmware level, e.g. MPU in ATF on some ARM platforms [4]).
[1a] https://googleprojectzero.blogspot.com/2017/04/over-air-exploiting-broadcoms-wi-fi_4.html
[1b] https://googleprojectzero.blogspot.com/2017/04/over-air-exploiting-broadcoms-wi-fi_11.html
[2] https://blade.tencent.com/en/advisories/qualpwn/
[3] https://www.bleepingcomputer.com/news/security/vulnerabilities-found-in-highly-popular-firmware-for-wifi-chips/
[4] https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8183/drivers/emi_mpu/emi_mpu.c#L132
Quoted 4 lines
v15:
- Apply Will's diff (https://lore.kernel.org/patchwork/patch/1448957/#1647521)
to fix the crash reported by Qian.
- Add Stefano's Acked-by tag for patch 01/12 from v14
That all should be now be on
https://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git/
devel/for-linus-5.14 (and linux-next)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 33 lines · Konrad Rzeszutek Wilk
Quoted 26 lines · Claire Chang
This series implements mitigations for lack of DMA access control on systems without an IOMMU, which could result in the DMA accessing the system memory at unexpected times and/or unexpected addresses, possibly leading to data leakage or corruption.
For example, we plan to use the PCI-e bus for Wi-Fi and that PCI-e bus is not behind an IOMMU. As PCI-e, by design, gives the device full access to system memory, a vulnerability in the Wi-Fi firmware could easily escalate to a full system exploit (remote wifi exploits: [1a], [1b] that shows a full chain of exploits; [2], [3]).
To mitigate the security concerns, we introduce restricted DMA. Restricted DMA utilizes the existing swiotlb to bounce streaming DMA in and out of a specially allocated region and does memory allocation from the same region. The feature on its own provides a basic level of protection against the DMA overwriting buffer contents at unexpected times. However, to protect against general data leakage and system memory corruption, the system needs to provide a way to restrict the DMA to a predefined memory region (this is usually done at firmware level, e.g. MPU in ATF on some ARM platforms [4]).
[1a] https://googleprojectzero.blogspot.com/2017/04/over-air-exploiting-broadcoms-wi-fi_4.html
[1b] https://googleprojectzero.blogspot.com/2017/04/over-air-exploiting-broadcoms-wi-fi_11.html
[2] https://blade.tencent.com/en/advisories/qualpwn/
[3] https://www.bleepingcomputer.com/news/security/vulnerabilities-found-in-highly-popular-firmware-for-wifi-chips/
[4] https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8183/drivers/emi_mpu/emi_mpu.c#L132Quoted 4 lines
v15:
- Apply Will's diff (https://lore.kernel.org/patchwork/patch/1448957/#1647521)
to fix the crash reported by Qian.
- Add Stefano's Acked-by tag for patch 01/12 from v14
Quoted 5 lines
That all should be now be on
https://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git/
devel/for-linus-5.14 (and linux-next)
devel/for-linus-5.14 looks good. Thanks!
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Will Deacon
maintainerQuoted 32 lines · Konrad Rzeszutek Wilk
Quoted 26 lines · Claire Chang
This series implements mitigations for lack of DMA access control on systems without an IOMMU, which could result in the DMA accessing the system memory at unexpected times and/or unexpected addresses, possibly leading to data leakage or corruption.
For example, we plan to use the PCI-e bus for Wi-Fi and that PCI-e bus is not behind an IOMMU. As PCI-e, by design, gives the device full access to system memory, a vulnerability in the Wi-Fi firmware could easily escalate to a full system exploit (remote wifi exploits: [1a], [1b] that shows a full chain of exploits; [2], [3]).
To mitigate the security concerns, we introduce restricted DMA. Restricted DMA utilizes the existing swiotlb to bounce streaming DMA in and out of a specially allocated region and does memory allocation from the same region. The feature on its own provides a basic level of protection against the DMA overwriting buffer contents at unexpected times. However, to protect against general data leakage and system memory corruption, the system needs to provide a way to restrict the DMA to a predefined memory region (this is usually done at firmware level, e.g. MPU in ATF on some ARM platforms [4]).
[1a] https://googleprojectzero.blogspot.com/2017/04/over-air-exploiting-broadcoms-wi-fi_4.html
[1b] https://googleprojectzero.blogspot.com/2017/04/over-air-exploiting-broadcoms-wi-fi_11.html
[2] https://blade.tencent.com/en/advisories/qualpwn/
[3] https://www.bleepingcomputer.com/news/security/vulnerabilities-found-in-highly-popular-firmware-for-wifi-chips/
[4] https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8183/drivers/emi_mpu/emi_mpu.c#L132Quoted 4 lines
v15:
- Apply Will's diff (https://lore.kernel.org/patchwork/patch/1448957/#1647521)
to fix the crash reported by Qian.
- Add Stefano's Acked-by tag for patch 01/12 from v14
Quoted 4 lines
That all should be now be on
https://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git/
devel/for-linus-5.14 (and linux-next)
Thanks Konrad!
Will
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BUILD: failure for Restricted DMA (rev2)
In reply to Claire Chang== Series Details ==
== Series Details ==
Series: Restricted DMA (rev2)
URL : https://patchwork.freedesktop.org/series/91883/
State : failure
== Summary ==
Applying: swiotlb: Refactor swiotlb init functions
Applying: swiotlb: Refactor swiotlb_create_debugfs
Applying: swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used
error: sha1 information is lacking or useless (kernel/dma/swiotlb.c).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch=diff' to see the failed patch Patch failed at 0003 swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BUILD: failure for Restricted DMA (rev3)
In reply to Claire Chang== Series Details ==
== Series Details ==
Series: Restricted DMA (rev3)
URL : https://patchwork.freedesktop.org/series/91883/
State : failure
== Summary ==
Applying: swiotlb: Refactor swiotlb init functions
Applying: swiotlb: Refactor swiotlb_create_debugfs
Applying: swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used
error: sha1 information is lacking or useless (kernel/dma/swiotlb.c).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch=diff' to see the failed patch Patch failed at 0003 swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BUILD: failure for Restricted DMA (rev5)
In reply to Claire Chang== Series Details ==
== Series Details ==
Series: Restricted DMA (rev5)
URL : https://patchwork.freedesktop.org/series/91883/
State : failure
== Summary ==
Applying: swiotlb: Refactor swiotlb init functions
Applying: swiotlb: Refactor swiotlb_create_debugfs
Applying: swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used
error: sha1 information is lacking or useless (kernel/dma/swiotlb.c).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch=diff' to see the failed patch Patch failed at 0003 swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx