Skip to contentSkip to conversation

drm/panel: simple: Add support for EDT ETMV570G2DHU panel

PATCH In review Yunus Bas 2 participants 3 messages Jul 9, 2021

Subsystems (3)
lore
Share & tools
lore

Yunus Bas

author
#0 lore raw

PATCH v4 1/2 drm/panel: simple: Add support for EDT ETMV570G2DHU panel

From: Stefan Riedmueller <[email protected]>

This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel to DRM simple panel driver.

---
Changes in v4:
- Moved code to proper place to keep alphabetic order

---
 drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +29 -0
index 21939d4352cf..7f3918fee250 100644
@@ -2046,6 +2046,32 @@ static const struct panel_desc edt_etm0700g0bdh6 = {
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
 };
 
+static const struct drm_display_mode edt_etmv570g2dhu_mode = {
+	.clock = 25175,
+	.hdisplay = 640,
+	.hsync_start = 640,
+	.hsync_end = 640 + 16,
+	.htotal = 640 + 16 + 30 + 114,
+	.vdisplay = 480,
+	.vsync_start = 480 + 10,
+	.vsync_end = 480 + 10 + 3,
+	.vtotal = 480 + 10 + 3 + 35,
+	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc edt_etmv570g2dhu = {
+	.modes = &edt_etmv570g2dhu_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 115,
+		.height = 86,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct display_timing evervision_vgg804821_timing = {
 	.pixelclock = { 27600000, 33300000, 50000000 },
 	.hactive = { 800, 800, 800 },
@@ -4350,6 +4376,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "edt,etm0700g0edh6",
 		.data = &edt_etm0700g0bdh6,
+	}, {
+		.compatible = "edt,etmv570g2dhu",
+		.data = &edt_etmv570g2dhu,
 	}, {
 		.compatible = "evervision,vgg804821",
 		.data = &evervision_vgg804821,
Signature · 1 line
2.30.0
author
#1 lore raw

PATCH v4 2/2 drm/panel: simple: Add support for EDT ETM0350G0DH6 panel

From: Stefan Riedmueller <[email protected]>

This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd panel to DRM simple panel driver.

---
 drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +29 -0
index 7f3918fee250..1b34338d346a 100644
@@ -1929,6 +1929,32 @@ static const struct panel_desc edt_et035012dm6 = {
 	.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
 };
 
+static const struct drm_display_mode edt_etm0350g0dh6_mode = {
+	.clock = 6520,
+	.hdisplay = 320,
+	.hsync_start = 320 + 20,
+	.hsync_end = 320 + 20 + 68,
+	.htotal = 320 + 20 + 68,
+	.vdisplay = 240,
+	.vsync_start = 240 + 4,
+	.vsync_end = 240 + 4 + 18,
+	.vtotal = 240 + 4 + 18,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc edt_etm0350g0dh6 = {
+	.modes = &edt_etm0350g0dh6_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 70,
+		.height = 53,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct drm_display_mode edt_etm043080dh6gp_mode = {
 	.clock = 10870,
 	.hdisplay = 480,
@@ -4355,6 +4381,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "edt,et035012dm6",
 		.data = &edt_et035012dm6,
+	}, {
+		.compatible = "edt,etm0350g0dh6",
+		.data = &edt_etm0350g0dh6,
 	}, {
 		.compatible = "edt,etm043080dh6gp",
 		.data = &edt_etm043080dh6gp,
Signature · 1 line
2.30.0