tst_net.sh: Declare prefix variable as empty
PATCH 1/1 tst_net.sh: Declare prefix variable as empty
From: Petr Vorel <[email protected]>
in tst_ipaddr_un(). This is required to fix problem on dash, which (unlike bash and busybox ash implementation) takes value of previously defined variable, i.e. guarding with local does not work:
$ foo=ee; bar() { local foo; echo "foo: '$foo'"; }; bar
foo: 'ee'It requires declare it as empty:
$ foo=ee; bar() { local foo=; echo "foo: '$foo'"; }; bar
foo: ''This problem seems to be on various dash versions from 0.5.8 to 0.5.11+git20200708+dd9ef66-5 (on Debian oldstable, stable, testing). It'd require to set all variables, but now fix just prefix, which is used in build.sh and it's quite common name.
--- testcases/lib/tst_net.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
testcases/lib/tst_net.sh +1 -1
@@ -408,7 +408,7 @@ tst_ipaddr_un() local max_net_id=$default_max local min_net_id=0 - local counter host_id host_range is_counter max_host_id min_host_id net_id prefix tmp type + local counter host_id host_range is_counter max_host_id min_host_id net_id prefix= tmp type local OPTIND while getopts "c:h:n:p" opt; do
Signature · 1 line
2.26.2
PATCH 1/1 tst_net.sh: Declare prefix variable as empty
Quoted 9 lines · Petr Vorel
From: Petr Vorel <[email protected]>
in
tst_ipaddr_un(). This is required to fix problem on dash, which (unlike bash and busybox ash implementation) takes value of previously defined variable, i.e. guarding with local does not work:$ foo=ee; bar() { local foo; echo "foo: '$foo'"; }; bar foo: 'ee'
I'm thinking maybe we should avoid defining the same name variables like that. But anyway, your fix should be worked.
Quoted 35 lines
It requires declare it as empty:
$ foo=ee; bar() { local foo=; echo "foo: '$foo'"; }; bar foo: ''This problem seems to be on various dash versions from 0.5.8 to 0.5.11+git20200708+dd9ef66-5 (on Debian oldstable, stable, testing). It'd require to set all variables, but now fix just prefix, which is used in
build.shand it's quite common name.Signed-off-by Petr Vorel <[email protected]>Signed-off-by Petr Vorel <[email protected]>--- testcases/lib/tst_net.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)testcases/lib/tst_net.sh +0
-1@@ -408,7 +408,7 @@ tst_ipaddr_un() local max_net_id=$default_max local min_net_id=0 - local counter host_id host_range is_counter max_host_id
min_host_idnet_idprefix tmp type
+ local counterhost_idhost_rangeis_countermax_host_idmin_host_idnet_idprefix= tmp typelocal OPTIND
while getopts "c:h:n:p" opt; do
--
2.26.2
Signature · 5 lines
Regards, Li Wang -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.linux.it/pipermail/ltp/attachments/20210712/436494f8/attachment.htm>
PATCH 1/1 tst_net.sh: Declare prefix variable as empty
Hi Li,
Quoted 8 lines · Petr Vorel
Quoted 6 lines
From: Petr Vorel <[email protected]>
in
tst_ipaddr_un(). This is required to fix problem on dash, which (unlike bash and busybox ash implementation) takes value of previously defined variable, i.e. guarding with local does not work:
Quoted 8 lines
Quoted 2 lines
$ foo=ee; bar() { local foo; echo "foo: '$foo'"; }; bar foo: 'ee'I'm thinking maybe we should avoid defining the same name variables like that. But anyway, your fix should be worked.
Reviewed-by Li Wang <[email protected]>
Thanks for a review!
It's a bit strange to add '=' only single variable, maybe I should have rename the variable.
Paranoid approach would be to add '=' to any variable which is assigned only on some circumstance or even any variable which is not assigned to any value. But we probably don't want to do it.
Kind regards,
Petr
PATCH 1/1 tst_net.sh: Declare prefix variable as empty
Hi,
Quoted 7 lines · Petr Vorel
Thanks for a review!
It's a bit strange to add '=' only single variable, maybe I should have rename the variable.Paranoid approach would be to add '=' to any variable which is assigned only on some circumstance or even any variable which is not assigned to any value. But we probably don't want to do it.
I think good common practice would be to add it to all variables, where it matters.
There are probably only very few places, where a local variable is not assigned before being accessed.
Maybe there is some kind of shell code linter, that can find uninitialized variables?
A good linter could also find variables, that should be local, but are not. But I have never looked into shell code linting.
In fs_bind_lib.sh, OPTIND in fs_bind_check probably also requires setting to empty, or better 0.
But maybe dash's implementation of getopts does not require it. I only had to add local OPTIND for busybox sh iirc...
Yet another case of: Shellcode is unpredictable :)
Joerg
PATCH 1/1 tst_net.sh: Declare prefix variable as empty
Hi Joerg,
Quoted 10 lines
Hi,
Quoted 7 lines · Petr Vorel
Thanks for a review!
It's a bit strange to add '=' only single variable, maybe I should have rename the variable.Paranoid approach would be to add '=' to any variable which is assigned only on some circumstance or even any variable which is not assigned to any value. But we probably don't want to do it.
Quoted 8 lines
I think good common practice would be to add it to all variables, where it matters.
There are probably only very few places, where a local variable is not assigned before being accessed.
Maybe there is some kind of shell code linter, that can find uninitialized variables?
A good linter could also find variables, that should be local, but are not. But I have never looked into shell code linting.
Thanks for your input.
I'm aware only of shellcheck [1], which I'm not a big fan of (false positives, useless hints). And yes, in this case it warns about 'local' not being POSIX => useless :(.
In testcases/lib/tst_net.sh line 411:
local counter host_id host_range is_counter max_host_id min_host_id net_id prefix tmp type
^-- SC3043: In POSIX sh, 'local' is undefined.Quoted 2 lines
In
fs_bind_lib.sh, OPTIND infs_bind_checkprobably also requires setting to empty, or better 0.
We use tst_test.sh in OPTIND=1 ("The index of the next argument to be processed by the getopts builtin command")
Quoted 2 lines
But maybe dash's implementation of getopts does not require it. I only had to add local OPTIND for busybox sh iirc...
I used to set local OPTIND (in tst_net.sh), which is obviously not working on dash.
Quoted 1 line
Yet another case of: Shellcode is unpredictable :)
Yep, I love shell (understand why everything is slowly rewritten into C).
Kind regards,
Petr
Quoted 1 line
Joerg
PATCH 1/1 tst_net.sh: Declare prefix variable as empty
In reply to Joerg VehlowHi all,
Quoted 7 lines
in
tst_ipaddr_un(). This is required to fix problem on dash, which (unlike bash and busybox ash implementation) takes value of previously defined variable, i.e. guarding with local does not work:$ foo=ee; bar() { local foo; echo "foo: '$foo'"; }; bar foo: 'ee'
Quoted 8 lines
It requires declare it as empty:
$ foo=ee; bar() { local foo=; echo "foo: '$foo'"; }; bar foo: ''This problem seems to be on various dash versions from 0.5.8 to 0.5.11+git20200708+dd9ef66-5 (on Debian oldstable, stable, testing). It'd require to set all variables, but now fix just prefix, which is used in
build.shand it's quite common name.
FYI this behavior is expected on dash, quoting man dash(1):
"When a variable is made local, it inherits the initial value and exported and readonly flags from the variable with the same name in the surrounding scope, if there is one."
Kind regards,
Petr