5.4.132-rc1 review
Subsystems (5)
Greg Kroah-Hartman
maintainerPATCH 334/348 leds: ktd2692: Fix an error handling path
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
[ Upstream commit ee78b9360e14c276f5ceaa4a0d06f790f04ccdad ]
In 'ktd2692_parse_dt()', if an error occurs after a successful 'regulator_enable()' call, we should call 'regulator_enable()'.
This is the same in 'ktd2692_probe()', if an error occurs after a successful 'ktd2692_parse_dt()' call.
Instead of adding 'regulator_enable()' in several places, implement a resource managed solution and simplify the remove function accordingly.
--- drivers/leds/leds-ktd2692.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-)
drivers/leds/leds-ktd2692.c +18 -9
@@ -256,6 +256,17 @@ static void ktd2692_setup(struct ktd2692_context *led) | KTD2692_REG_FLASH_CURRENT_BASE); } +static void regulator_disable_action (void *_data) +{ +struct device *dev = _data; +struct ktd2692_context *led =dev_get_drvdata (dev); +int ret; + + ret =regulator_disable (led->regulator); +if (ret) +dev_err (dev,"Failed to disable supply: %d\n" , ret); +} +static int ktd2692_parse_dt (struct ktd2692_context *led,struct device *dev,struct ktd2692_led_config_data *cfg) {
@@ -286,8 +297,14 @@ static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,if (led->regulator) { ret =regulator_enable (led->regulator); -if (ret) +if (ret) {dev_err (dev,"Failed to enable supply: %d\n" , ret); + }else { + ret =devm_add_action_or_reset (dev, + regulator_disable_action, dev); +if (ret) +return ret; + } } child_node =of_get_next_available_child (np,NULL );
@@ -377,17 +394,9 @@ static int ktd2692_probe(struct platform_device *pdev)static int ktd2692_remove (struct platform_device *pdev) {struct ktd2692_context *led =platform_get_drvdata (pdev); -int ret;led_classdev_flash_unregister (&led->fled_cdev); -if (led->regulator) { - ret =regulator_disable (led->regulator); -if (ret) -dev_err (&pdev->dev, -"Failed to disable supply: %d\n" , ret); - } -mutex_destroy (&led->lock);return 0 ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 335/348 powerpc: Offline CPU in stop_this_cpu()
In reply to Greg Kroah-HartmanFrom: Nicholas Piggin <[email protected]>
[ Upstream commit bab26238bbd44d5a4687c0a64fd2c7f2755ea937 ]
printk_safe_flush_on_panic() has special lock breaking code for the case where we panic()ed with the console lock held. It relies on panic IPI causing other CPUs to mark themselves offline.
Do as most other architectures do.
This effectively reverts commit de6e5d38417e ("powerpc: smp_send_stop do not offline stopped CPUs"), unfortunately it may result in some false positive warnings, but the alternative is more situations where we can crash without getting messages out.
--- arch/powerpc/kernel/smp.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/powerpc/kernel/smp.c +11 -0
@@ -588,6 +588,8 @@ static void nmi_stop_this_cpu(struct pt_regs *regs)/* * IRQs are already hard disabled by the smp_handle_nmi_ipi. */ +set_cpu_online (smp_processor_id (), false); +spin_begin ();while (1 )spin_cpu_relax ();
@@ -603,6 +605,15 @@ void smp_send_stop(void)static void stop_this_cpu (void *dummy) {hard_irq_disable (); + +/* +* Offlining CPUs in stop_this_cpu can result in scheduler warnings, +* (see commit de6e5d38417e), but printk_safe_flush_on_panic() wants +* to know other CPUs are offline before it breaks locks to flush +* printk buffers, in case we panic()ed while holding the lock. +*/ +set_cpu_online (smp_processor_id (), false); +spin_begin ();while (1 )spin_cpu_relax ();
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 336/348 serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
In reply to Greg Kroah-HartmanFrom: Pali Rohár <[email protected]>
[ Upstream commit ecd6b010d81f97b06b2f64d2d4f50ebf5acddaa9 ]
Testing mvuart->clk for non-error is not enough as mvuart->clk may contain valid clk pointer but when clk_prepare_enable(mvuart->clk) failed then port->uartclk is zero.
When mvuart->clk is not available then port->uartclk is zero too.
Parent clock rate port->uartclk is needed to calculate UART clock divisor and without it is not possible to change baudrate.
So fix test condition when it is possible to change baudrate.
--- drivers/tty/serial/mvebu-uart.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/tty/serial/mvebu-uart.c +2 -3
@@ -445,12 +445,11 @@ static void mvebu_uart_shutdown(struct uart_port *port)static int mvebu_uart_baud_rate_set (struct uart_port *port,unsigned int baud) { -struct mvebu_uart *mvuart =to_mvuart (port);unsigned int d_divisor, m_divisor;u32 brdv, osamp; -if (IS_ERR (mvuart->clk)) -return -PTR_ERR (mvuart->clk); +if (!port->uartclk) +return -EOPNOTSUPP ;/* * The baudrate is derived from the UART clock thanks to two divisors:
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 337/348 serial: mvebu-uart: correctly calculate minimal possible baudrate
In reply to Greg Kroah-HartmanFrom: Pali Rohár <[email protected]>
[ Upstream commit deeaf963569a0d9d1b08babb771f61bb501a5704 ]
For default (x16) scheme which is currently used by mvebu-uart.c driver, maximal divisor of UART base clock is 1023*16. Therefore there is limit for minimal supported baudrate. This change calculate it correctly and prevents setting invalid divisor 0 into hardware registers.
--- drivers/tty/serial/mvebu-uart.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/tty/serial/mvebu-uart.c +8 -3
@@ -481,7 +481,7 @@ static void mvebu_uart_set_termios(struct uart_port *port, struct ktermios *old) {unsigned long flags; -unsigned int baud; +unsigned int baud, min_baud, max_baud;spin_lock_irqsave (&port->lock, flags);
@@ -500,16 +500,21 @@ static void mvebu_uart_set_termios(struct uart_port *port, port->ignore_status_mask |=STAT_RX_RDY (port) |STAT_BRK_ERR ;/* +* Maximal divisor is 1023 * 16 when using default (x16) scheme. * Maximum achievable frequency with simple baudrate divisor is 230400. * Since the error per bit frame would be of more than 15%, achieving * higher frequencies would require to implement the fractional divisor * feature. */ - baud =uart_get_baud_rate (port, termios, old,0 ,230400 ); + min_baud =DIV_ROUND_UP (port->uartclk,1023 *16 ); + max_baud =230400 ; + + baud =uart_get_baud_rate (port, termios, old, min_baud, max_baud);if (mvebu_uart_baud_rate_set (port, baud)) {/* No clock available, baudrate cannot be changed */ if (old) - baud =uart_get_baud_rate (port, old,NULL ,0 ,230400 ); + baud =uart_get_baud_rate (port, old,NULL , + min_baud, max_baud); }else {tty_termios_encode_baud_rate (termios, baud, baud);uart_update_timeout (port, termios->c_cflag, baud);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 338/348 arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
In reply to Greg Kroah-HartmanFrom: Pali Rohár <[email protected]>
[ Upstream commit 2cbfdedef39fb5994b8f1e1df068eb8440165975 ]
UART1 (standard variant with DT node name 'uart0') has register space 0x12000-0x12018 and not whole size 0x200. So fix also this in example.
--- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/marvell/armada-37xx.dtsi +1 -1
@@ -134,7 +134,7 @@ uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x200>; + reg = <0x12000 0x18>; clocks = <&xtalclk>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 339/348 vfio/pci: Handle concurrent vma faults
In reply to Greg Kroah-HartmanFrom: Alex Williamson <[email protected]>
[ Upstream commit 6a45ece4c9af473555f01f0f8b97eba56e3c7d0d ]
io_remap_pfn_range() will trigger a BUG_ON if it encounters a populated pte within the mapping range. This can occur because we map the entire vma on fault and multiple faults can be blocked behind the vma_lock. This leads to traces like the one reported below.
We can use our vma_list to test whether a given vma is mapped to avoid this issue.
[ 1591.733256] kernel BUG at mm/memory.c:2177! [ 1591.739515] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 1591.747381] Modules linked in: vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 1591.760536] CPU: 2 PID: 227 Comm: lcore-worker-2 Tainted: G O 5.11.0-rc3+ #1 [ 1591.770735] Hardware name: , BIOS HixxxxFPGA 1P B600 V121-1 [ 1591.778872] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) [ 1591.786134] pc : remap_pfn_range+0x214/0x340 [ 1591.793564] lr : remap_pfn_range+0x1b8/0x340 [ 1591.799117] sp : ffff80001068bbd0 [ 1591.803476] x29: ffff80001068bbd0 x28: 0000042eff6f0000 [ 1591.810404] x27: 0000001100910000 x26: 0000001300910000 [ 1591.817457] x25: 0068000000000fd3 x24: ffffa92f1338e358 [ 1591.825144] x23: 0000001140000000 x22: 0000000000000041 [ 1591.832506] x21: 0000001300910000 x20: ffffa92f141a4000 [ 1591.839520] x19: 0000001100a00000 x18: 0000000000000000 [ 1591.846108] x17: 0000000000000000 x16: ffffa92f11844540 [ 1591.853570] x15: 0000000000000000 x14: 0000000000000000 [ 1591.860768] x13: fffffc0000000000 x12: 0000000000000880 [ 1591.868053] x11: ffff0821bf3d01d0 x10: ffff5ef2abd89000 [ 1591.875932] x9 : ffffa92f12ab0064 x8 : ffffa92f136471c0 [ 1591.883208] x7 : 0000001140910000 x6 : 0000000200000000 [ 1591.890177] x5 : 0000000000000001 x4 : 0000000000000001 [ 1591.896656] x3 : 0000000000000000 x2 : 0168044000000fd3 [ 1591.903215] x1 : ffff082126261880 x0 : fffffc2084989868 [ 1591.910234] Call trace: [ 1591.914837] remap_pfn_range+0x214/0x340 [ 1591.921765] vfio_pci_mmap_fault+0xac/0x130 [vfio_pci] [ 1591.931200] __do_fault+0x44/0x12c [ 1591.937031] handle_mm_fault+0xcc8/0x1230 [ 1591.942475] do_page_fault+0x16c/0x484 [ 1591.948635] do_translation_fault+0xbc/0xd8 [ 1591.954171] do_mem_abort+0x4c/0xc0 [ 1591.960316] el0_da+0x40/0x80 [ 1591.965585] el0_sync_handler+0x168/0x1b0 [ 1591.971608] el0_sync+0x174/0x180 [ 1591.978312] Code: eb1b027f 540000c0 f9400022 b4fffe02 (d4210000)
--- drivers/vfio/pci/vfio_pci.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-)
drivers/vfio/pci/vfio_pci.c +21 -8
@@ -1430,6 +1430,7 @@ static vm_fault_t vfio_pci_mmap_fault(struct vm_fault *vmf) {struct vm_area_struct *vma = vmf->vma;struct vfio_pci_device *vdev = vma->vm_private_data; +struct vfio_pci_mmap_vma *mmap_vma;vm_fault_t ret =VM_FAULT_NOPAGE ;mutex_lock (&vdev->vma_lock);
@@ -1437,24 +1438,36 @@ static vm_fault_t vfio_pci_mmap_fault(struct vm_fault *vmf)if (!__vfio_pci_memory_enabled (vdev)) { ret =VM_FAULT_SIGBUS ; -mutex_unlock (&vdev->vma_lock); goto up_out; } -if (__vfio_pci_add_vma (vdev, vma)) { - ret =VM_FAULT_OOM ; -mutex_unlock (&vdev->vma_lock); - goto up_out; +/* +* We populate the whole vma on fault, so we need to test whether +* the vma has already been mapped, such as for concurrent faults +* to the same vma. io_remap_pfn_range() will trigger a BUG_ON if +* we ask it to fill the same range again. +*/ +list_for_each_entry (mmap_vma, &vdev->vma_list, vma_next) { +if (mmap_vma->vma == vma) + goto up_out; } -mutex_unlock (&vdev->vma_lock); -if (io_remap_pfn_range (vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, vma->vm_page_prot)) + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) { ret =VM_FAULT_SIGBUS ; +zap_vma_ptes (vma, vma->vm_start, vma->vm_end - vma->vm_start); + goto up_out; + } + +if (__vfio_pci_add_vma (vdev, vma)) { + ret =VM_FAULT_OOM ; +zap_vma_ptes (vma, vma->vm_start, vma->vm_end - vma->vm_start); + } up_out:up_read (&vdev->memory_lock); +mutex_unlock (&vdev->vma_lock);return ret; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 340/348 mm/huge_memory.c: dont discard hugepage if other processes are mapping it
In reply to Greg Kroah-HartmanFrom: Miaohe Lin <[email protected]>
[ Upstream commit babbbdd08af98a59089334eb3effbed5a7a0cf7f ]
If other processes are mapping any other subpages of the hugepage, i.e. in pte-mapped thp case, page_mapcount() will return 1 incorrectly. Then we would discard the page while other processes are still mapping it. Fix it by using total_mapcount() which can tell whether other processes are still mapping it.
--- mm/huge_memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
mm/huge_memory.c +1 -1
@@ -1723,7 +1723,7 @@ bool madvise_free_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,* If other processes are mapping this page, we couldn't discard * the page unless they all do MADV_FREE so let's skip the page. */ -if (page_mapcount (page) !=1 ) +if (total_mapcount (page) !=1 ) goto out;if (!trylock_page (page))
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 341/348 mm/z3fold: fix potential memory leak in z3fold_destroy_pool()
In reply to Greg Kroah-HartmanFrom: Miaohe Lin <[email protected]>
[ Upstream commit dac0d1cfda56472378d330b1b76b9973557a7b1d ]
There is a memory leak in z3fold_destroy_pool() as it forgets to free_percpu pool->unbuddied. Call free_percpu for pool->unbuddied to fix this issue.
--- mm/z3fold.c | 1 + 1 file changed, 1 insertion(+)
mm/z3fold.c +1 -0
@@ -839,6 +839,7 @@ static void z3fold_destroy_pool(struct z3fold_pool *pool)destroy_workqueue (pool->compact_wq);destroy_workqueue (pool->release_wq);z3fold_unregister_migration (pool); +free_percpu (pool->unbuddied);kfree (pool); }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 342/348 selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
In reply to Greg Kroah-HartmanFrom: Dave Hansen <[email protected]>
[ Upstream commit f36ef407628835a7d7fb3d235b1f1aac7022d9a3 ]
Patch series "selftests/vm/pkeys: Bug fixes and a new test".
There has been a lot of activity on the x86 front around the XSAVE architecture which is used to context-switch processor state (among other things). In addition, AMD has recently joined the protection keys club by adding processor support for PKU.
The AMD implementation helped uncover a kernel bug around the PKRU "init state", which actually applied to Intel's implementation but was just harder to hit. This series adds a test which is expected to help find this class of bug both on AMD and Intel. All the work around pkeys on x86 also uncovered a few bugs in the selftest.
This patch (of 4):
The "random" pkey allocation code currently does the good old:
srand((unsigned int)time(NULL));
*But*, it unfortunately does this on every random pkey allocation.
There may be thousands of these a second. time() has a one second resolution. So, each time alloc_random_pkey() is called, the PRNG is *RESET* to time(). This is nasty. Normally, if you do:
srand(<ANYTHING>); foo = rand(); bar = rand();
You'll be quite guaranteed that 'foo' and 'bar' are different. But, if you do:
srand(1); foo = rand(); srand(1); bar = rand();
You are quite guaranteed that 'foo' and 'bar' are the *SAME*. The recent "fix" effectively forced the test case to use the same "random" pkey for the whole test, unless the test run crossed a second boundary.
Only run srand() once at program startup.
This explains some very odd and persistent test failures I've been seeing.
--- tools/testing/selftests/x86/protection_keys.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
tools/testing/selftests/x86/protection_keys.c +2 -1
@@ -613,7 +613,6 @@ int alloc_random_pkey(void)int nr_alloced =0 ;int random_index;memset (alloced_pkeys,0 ,sizeof (alloced_pkeys)); -srand ((unsigned int )time (NULL ));/* allocate every possible key and make a note of which ones we got */ max_nr_pkey_allocs =NR_PKEYS ;
@@ -1479,6 +1478,8 @@ int main(void) {int nr_iterations =22 ; +srand ((unsigned int )time (NULL )); +setup_handlers ();printf ("has pku: %d\n" ,cpu_has_pku ());
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 343/348 perf llvm: Return -ENOMEM when asprintf() fails
In reply to Greg Kroah-HartmanFrom: Arnaldo Carvalho de Melo <[email protected]>
[ Upstream commit c435c166dcf526ac827bc964d82cc0d5e7a1fd0b ]
Zhihao sent a patch but it made llvm__compile_bpf() return what asprintf() returns on error, which is just -1, but since this function returns -errno, fix it by returning -ENOMEM for this case instead.
--- tools/perf/util/llvm-utils.c | 2 ++ 1 file changed, 2 insertions(+)
tools/perf/util/llvm-utils.c +2 -0
@@ -502,6 +502,7 @@ int llvm__compile_bpf(const char *path, void **p_obj_buf, goto errout; } + err = -ENOMEM ;if (asprintf (&pipe_template,"%s -emit-llvm | %s -march=bpf %s -filetype=obj -o -" , template, llc_path, opts) <0 ) {pr_err ("ERROR:\tnot enough memory to setup command line\n" );
@@ -522,6 +523,7 @@ int llvm__compile_bpf(const char *path, void **p_obj_buf,pr_debug ("llvm compiling command template: %s\n" , template); + err = -ENOMEM ;if (asprintf (&command_echo,"echo -n \"%s\"" , template) <0 ) goto errout;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 344/348 scsi: target: cxgbit: Unmap DMA buffer before calling target_execute_cmd()
In reply to Greg Kroah-HartmanFrom: Varun Prakash <[email protected]>
commit 6ecdafaec79d4b3388a5b017245f23a0ff9d852d upstream.
Instead of calling dma_unmap_sg() after completing WRITE I/O, call dma_unmap_sg() before calling target_execute_cmd() to sync the DMA buffer.
--- drivers/target/iscsi/cxgbit/cxgbit_ddp.c | 19 ++++++++++--------- drivers/target/iscsi/cxgbit/cxgbit_target.c | 21 ++++++++++++++++++--- 2 files changed, 28 insertions(+), 12 deletions(-)
drivers/target/iscsi/cxgbit/cxgbit_ddp.c +10 -9
@@ -265,12 +265,13 @@ void cxgbit_unmap_cmd(struct iscsi_connstruct cxgbit_cmd *ccmd =iscsit_priv_cmd (cmd);if (ccmd->release) { -struct cxgbi_task_tag_info *ttinfo = &ccmd->ttinfo; - -if (ttinfo->sgl) { +if (cmd->se_cmd.se_cmd_flags &SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC ) { +put_page (sg_page (&ccmd->sg)); + }else {struct cxgbit_sock *csk = conn->context;struct cxgbit_device *cdev = csk->com.cdev;struct cxgbi_ppm *ppm =cdev2ppm (cdev); +struct cxgbi_task_tag_info *ttinfo = &ccmd->ttinfo;/* Abort the TCP conn if DDP is not complete to * avoid any possibility of DDP after freeing
@@ -280,14 +281,14 @@ void cxgbit_unmap_cmd(struct iscsi_conn cmd->se_cmd.data_length))cxgbit_abort_conn (csk); +if (unlikely (ttinfo->sgl)) { +dma_unmap_sg (&ppm->pdev->dev, ttinfo->sgl, + ttinfo->nents,DMA_FROM_DEVICE ); + ttinfo->nents =0 ; + ttinfo->sgl =NULL ; + }cxgbi_ppm_ppod_release (ppm, ttinfo->idx); - -dma_unmap_sg (&ppm->pdev->dev, ttinfo->sgl, - ttinfo->nents,DMA_FROM_DEVICE ); - }else { -put_page (sg_page (&ccmd->sg)); } - ccmd->release = false; } }
drivers/target/iscsi/cxgbit/cxgbit_target.c +18 -3
@@ -1013,17 +1013,18 @@ static int cxgbit_handle_iscsi_dataout(sstruct scatterlist *sg_start;struct iscsi_conn *conn = csk->conn;struct iscsi_cmd *cmd =NULL ; +struct cxgbit_cmd *ccmd; +struct cxgbi_task_tag_info *ttinfo;struct cxgbit_lro_pdu_cb *pdu_cb =cxgbit_rx_pdu_cb (csk->skb);struct iscsi_data *hdr = (struct iscsi_data *)pdu_cb->hdr;u32 data_offset =be32_to_cpu (hdr->offset); -u32 data_len = pdu_cb->dlen; +u32 data_len =ntoh24 (hdr->dlength);int rc, sg_nents, sg_off;bool dcrc_err = false;if (pdu_cb->flags &PDUCBF_RX_DDP_CMP ) {u32 offset =be32_to_cpu (hdr->offset);u32 ddp_data_len; -u32 payload_length =ntoh24 (hdr->dlength);bool success = false; cmd =iscsit_find_cmd_from_itt_or_dump (conn, hdr->itt,0 );
@@ -1038,7 +1039,7 @@ static int cxgbit_handle_iscsi_dataout(s cmd->data_sn =be32_to_cpu (hdr->datasn); rc =__iscsit_check_dataout_hdr (conn, (unsigned char *)hdr, - cmd, payload_length, &success); + cmd, data_len, &success);if (rc <0 )return rc;else if (!success)
@@ -1076,6 +1077,20 @@ static int cxgbit_handle_iscsi_dataout(scxgbit_skb_copy_to_sg (csk->skb, sg_start, sg_nents, skip); } + ccmd =iscsit_priv_cmd (cmd); + ttinfo = &ccmd->ttinfo; + +if (ccmd->release && ttinfo->sgl && + (cmd->se_cmd.data_length == (cmd->write_data_done + data_len))) { +struct cxgbit_device *cdev = csk->com.cdev; +struct cxgbi_ppm *ppm =cdev2ppm (cdev); + +dma_unmap_sg (&ppm->pdev->dev, ttinfo->sgl, ttinfo->nents, +DMA_FROM_DEVICE ); + ttinfo->nents =0 ; + ttinfo->sgl =NULL ; + } + check_payload: rc =iscsit_check_dataout_payload (cmd, hdr, dcrc_err);
Greg Kroah-Hartman
maintainerPATCH 345/348 block: return the correct bvec when checking for gaps
In reply to Greg Kroah-HartmanFrom: Long Li <[email protected]>
commit c9c9762d4d44dcb1b2ba90cfb4122dc11ceebf31 upstream.
After commit 07173c3ec276 ("block: enable multipage bvecs"), a bvec can have multiple pages. But bio_will_gap() still assumes one page bvec while checking for merging. If the pages in the bvec go across the seg_boundary_mask, this check for merging can potentially succeed if only the 1st page is tested, and can fail if all the pages are tested.
Later, when SCSI builds the SG list the same check for merging is done in __blk_segment_map_sg_merge() with all the pages in the bvec tested. This time the check may fail if the pages in bvec go across the seg_boundary_mask (but tested okay in bio_will_gap() earlier, so those BIOs were merged). If this check fails, we end up with a broken SG list for drivers assuming the SG list not having offsets in intermediate pages. This results in incorrect pages written to the disk.
Fix this by returning the multi-page bvec when testing gaps for merging.
--- include/linux/bio.h | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
include/linux/bio.h +4 -8
@@ -40,9 +40,6 @@#define bio_offset (bio) bio_iter_offset((bio), (bio)->bi_iter)#define bio_iovec (bio) bio_iter_iovec((bio), (bio)->bi_iter) -#define bio_multiple_segments (bio) \ - ((bio)->bi_iter.bi_size != bio_iovec(bio).bv_len) -#define bvec_iter_sectors (iter) ((iter).bi_size >> 9)#define bvec_iter_end_sector (iter) ((iter).bi_sector + bvec_iter_sectors((iter)))
@@ -246,7 +243,7 @@ static inline void bio_clear_flag(structstatic inline void bio_get_first_bvec (struct bio *bio,struct bio_vec *bv) { - *bv =bio_iovec (bio); + *bv =mp_bvec_iter_bvec (bio->bi_io_vec, bio->bi_iter); }static inline void bio_get_last_bvec (struct bio *bio,struct bio_vec *bv)
@@ -254,10 +251,9 @@ static inline void bio_get_last_bvec(strstruct bvec_iter iter = bio->bi_iter;int idx; -if (unlikely (!bio_multiple_segments (bio))) { - *bv =bio_iovec (bio); -return ; - } +bio_get_first_bvec (bio, bv); +if (bv->bv_len == bio->bi_iter.bi_size) +return ;/* this bio only has a single bvec */ bio_advance_iter (bio, &iter, iter.bi_size);
Greg Kroah-Hartman
maintainerPATCH 346/348 mmc: block: Disable CMDQ on the ioctl path
In reply to Greg Kroah-HartmanFrom: Bean Huo <[email protected]>
commit 70b52f09080565030a530a784f1c9948a7f48ca3 upstream.
According to the eMMC Spec:
"When command queuing is enabled (CMDQ Mode En bit in CMDQ_MODE_EN field is set to ‘1’) class 11 commands are the only method through which data transfer tasks can be issued. Existing data transfer commands, namely CMD18/CMD17 and CMD25/CMD24, are not supported when command queuing is enabled."
which means if CMDQ is enabled, the FFU commands will not be supported. To fix this issue, just simply disable CMDQ on the ioctl path, and re-enable CMDQ once ioctl request is completed.
--- drivers/mmc/core/block.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/mmc/core/block.c +8 -0
@@ -1053,6 +1053,12 @@ static void mmc_blk_issue_drv_op(structswitch (mq_rq->drv_op) {case MMC_DRV_OP_IOCTL : +if (card->ext_csd.cmdq_en) { + ret =mmc_cmdq_disable (card); +if (ret) +break ; + } + fallthrough;case MMC_DRV_OP_IOCTL_RPMB : idata = mq_rq->drv_op_data;for (i =0 , ret =0 ; i < mq_rq->ioc_count; i++) {
@@ -1063,6 +1069,8 @@ static void mmc_blk_issue_drv_op(struct/* Always switch back to main area after RPMB access */ if (rpmb_ioctl)mmc_blk_part_switch (card,0 ); +else if (card->reenable_cmdq && !card->ext_csd.cmdq_en) +mmc_cmdq_enable (card);break ;case MMC_DRV_OP_BOOT_WP : ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP,
Greg Kroah-Hartman
maintainerPATCH 347/348 mmc: vub3000: fix control-request direction
In reply to Greg Kroah-HartmanFrom: Johan Hovold <[email protected]>
commit 3c0bb3107703d2c58f7a0a7a2060bb57bc120326 upstream.
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation.
Fix the SET_ROM_WAIT_STATES request which erroneously used usb_rcvctrlpipe().
--- drivers/mmc/host/vub300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mmc/host/vub300.c +1 -1
@@ -2286,7 +2286,7 @@ static int vub300_probe(struct usb_interif (retval <0 ) goto error5; retval = -usb_control_msg (vub300->udev,usb_rcvctrlpipe (vub300->udev,0 ), +usb_control_msg (vub300->udev,usb_sndctrlpipe (vub300->udev,0 ),SET_ROM_WAIT_STATES ,USB_DIR_OUT |USB_TYPE_VENDOR |USB_RECIP_DEVICE , firmware_rom_wait_states,0x0000 ,NULL ,0 ,HZ );
Greg Kroah-Hartman
maintainerPATCH 348/348 scsi: core: Retry I/O for Notify (Enable Spinup) Required error
In reply to Greg Kroah-HartmanFrom: Quat Le <[email protected]>
commit 104739aca4488909175e9e31d5cd7d75b82a2046 upstream.
If the device is power-cycled, it takes time for the initiator to transmit the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to respond to the primitive to become ACTIVE. Retry the I/O request to allow the device time to become ACTIVE.
--- drivers/scsi/scsi_lib.c | 1 + 1 file changed, 1 insertion(+)
drivers/scsi/scsi_lib.c +1 -0
@@ -762,6 +762,7 @@ static void scsi_io_completion_action(stcase 0x07 :/* operation in progress */ case 0x08 :/* Long write in progress */ case 0x09 :/* self test in progress */ +case 0x11 :/* notify (enable spinup) required */ case 0x14 :/* space allocation in progress */ case 0x1a :/* start stop unit in progress */ case 0x1b :/* sanitize in progress */
Quoted 1,445 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.132 release. There are 348 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jul 2021 06:02:46 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.132-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:Greg Kroah-Hartman <[email protected]>
Linux 5.4.132-rc1Quat Le <[email protected]>
scsi: core: Retry I/O for Notify (Enable Spinup) Required errorJohan Hovold <[email protected]>
mmc: vub3000: fix control-request directionBean Huo <[email protected]>
mmc: block: Disable CMDQ on the ioctl pathLong Li <[email protected]>
block: return the correct bvec when checking for gapsVarun Prakash <[email protected]>
scsi: target: cxgbit: Unmap DMA buffer before callingtarget_execute_cmd()Arnaldo Carvalho de Melo <[email protected]>
perf llvm: Return-ENOMEMwhenasprintf()failsDave Hansen <[email protected]>
selftests/vm/pkeys: fixalloc_random_pkey()to make it really, really randomMiaohe Lin <[email protected]>
mm/z3fold: fix potential memory leak inz3fold_destroy_pool()Miaohe Lin <[email protected]>
mm/huge_memory.c: don't discard hugepage if other processes are mapping itAlex Williamson <[email protected]>
vfio/pci: Handle concurrent vma faultsPali Rohár <[email protected]>
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UARTPali Rohár <[email protected]>
serial: mvebu-uart: correctly calculate minimal possible baudratePali Rohár <[email protected]>
serial: mvebu-uart: do not allow changing baudrate when uartclk is not availableNicholas Piggin <[email protected]>
powerpc: Offline CPU instop_this_cpu()Christophe JAILLET <[email protected]>
leds: ktd2692: Fix an error handling pathZhen Lei <[email protected]>
leds: as3645a: Fix error return code inas3645a_parse_node()Chung-Chiang Cheng <[email protected]>
configfs: fix memleak inconfigfs_release_bin_fileCodrin Ciubotariu <[email protected]>
ASoC: atmel-i2s: Fix usage of capture and playback at the same timeMarek Szyprowski <[email protected]>
extcon: max8997: Add missing modalias stringStephan Gerhold <[email protected]>
extcon: sm5502: Drop invalid register write insm5502_reg_dataChristophe JAILLET <[email protected]>
phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()Kunihiko Hayashi <[email protected]>
phy: uniphier-pcie: Fix updating phy parametersRichard Fitzgerald <[email protected]>
soundwire: stream: Fix test for DP prepare completeZhen Lei <[email protected]>
scsi: mpt3sas: Fix error return value in_scsih_expander_add()Yang Yingliang <[email protected]>
mtd: rawnand: marvell: add missingclk_disable_unprepare()on error inmarvell_nfc_resume()Geert Uytterhoeven <[email protected]>
of: Fix truncation of memory sizes on 32-bit platformsRichard Fitzgerald <[email protected]>
ASoC: cs42l42: Correct definition ofCS42L42_ADC_PDN_MASKJonathan Cameron <[email protected]>
iio: prox: isl29501: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: light: vcnl4035: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Maciej W. Rozycki <[email protected]>
serial: 8250: Actually allowUPF_MAGIC_MULTIPLIERbaud ratesSergio Paracuellos <[email protected]>
staging: mt7621-dts: fix pci address for PCI memory rangePavel Skripkin <[email protected]>
staging: rtl8712: fix memory leak inrtl871x_load_fw_cbPavel Skripkin <[email protected]>
staging: rtl8712: remove redundant check inr871xu_drv_initDan Carpenter <[email protected]>
staging: gdm724x: check for overflow ingdm_lte_netif_rx()Dan Carpenter <[email protected]>
staging: gdm724x: check for buffer overflow ingdm_lte_multi_sdu_pkt()Jonathan Cameron <[email protected]>
iio: magn: rm3100: Fix alignment of buffer iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: adc: ti-ads8688: Fix alignment of buffer iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: adc: mxs-lradc: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: adc: hx711: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: adc: at91-sama5d2: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Alexandru Ardelean <[email protected]>
iio: at91-sama5d2_adc: remove usage ofiio_priv_to_dev()helperAndy Shevchenko <[email protected]>
eeprom:idt_89hpesx: Restore printing the unsupported fwnode nameAndy Shevchenko <[email protected]>
eeprom: idt_89hpesx: Put fwnode in matching case during ->probe()Clément Lassieur <[email protected]>
usb: dwc2: Don't reset the core after setting turnaround timeAndrew Gabbasov <[email protected]>
usb: gadget:f_fs: Fix setting of device and driver data cross-referencesChristophe JAILLET <[email protected]>
ASoC: mediatek: mtk-btcvsd: Fix an error handling path in 'mtk_btcvsd_snd_probe()'Srinath Mannam <[email protected]>
iommu/dma: Fix IOVA reserve dma rangesRandy Dunlap <[email protected]>
s390: appldata depends onPROC_SYSCTLZhen Lei <[email protected]>
visorbus: fix error return code invisorchipset_init()Joachim Fenkes <[email protected]>
fsi/sbefifo: Fix reset timeoutJoachim Fenkes <[email protected]>
fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBEEddie James <[email protected]>
fsi: occ: Don't accept response from un-initialized OCCEddie James <[email protected]>
fsi: scom: Reset the FSI2PIB engine for any errorColin Ian King <[email protected]>
fsi: core: Fix return of error values on failuresRandy Dunlap <[email protected]>
scsi: FlashPoint: Renamesi_flagsfieldAndy Shevchenko <[email protected]>
leds: lm3692x: Put fwnode in any case during ->probe()Marek Behún <[email protected]>
leds: lm36274: cosmetic: rename lm36274_data to chipAndy Shevchenko <[email protected]>
leds: lm3532: select regmap I2C APIChristophe JAILLET <[email protected]>
tty: nozomi: Fix the error handling path of 'nozomi_card_init()'Christophe JAILLET <[email protected]>
firmware: stratix10-svc: Fix a resource leak in an error handling pathYu Kuai <[email protected]>
char: pcmcia: error out if 'num_bytes_read' is greater than 4 inset_protocol()Corentin Labbe <[email protected]>
mtd: partitions: redboot: seek fis-index-block in the right nodeZhen Lei <[email protected]>
Input:hil_kbd- fix error return code inhil_dev_connect()Kuninori Morimoto <[email protected]>
ASoC: rsnd: tidyup loop onrsnd_adg_clk_query()Andy Shevchenko <[email protected]>
backlight: lm3630a_bl: Put fwnode in error case during ->probe()Yang Yingliang <[email protected]>
ASoC: hisilicon: fix missingclk_disable_unprepare()on error inhi6210_i2s_startup()Yang Yingliang <[email protected]>
ASoC: rk3328: fix missingclk_disable_unprepare()on error inrk3328_platform_probe()Jonathan Cameron <[email protected]>
iio: potentiostat: lmp91000: Fix alignment of buffer iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio:cros_ec_sensors: Fix alignment of buffer iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: light: tcs3472: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: light: tcs3414: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: light: isl29125: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: magn: bmc150: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: magn: hmc5843: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: prox: as3935: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: prox: pulsed-light: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: prox: srf08: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: humidity: am2315: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: gyro: bmg160: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: adc: vf610: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: adc: ti-ads1015: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: accel: stk8ba50: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: accel: stk8312: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: accel: mxc4005: Fix overread of data and alignment issue.Jonathan Cameron <[email protected]>
iio:accel:mxc4005: Drop unnecessary explicit casts inregmap_bulk_readcallsJonathan Cameron <[email protected]>
iio: accel: kxcjk-1013: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: accel: hid: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: accel: bma220: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Jonathan Cameron <[email protected]>
iio: accel: bma180: Fix buffer alignment iniio_push_to_buffers_with_timestamp()Nuno Sa <[email protected]>
iio: adis16400: do not return ints in irq handlersNuno Sa <[email protected]>
iio:adis_buffer: do not return ints in irq handlersArnd Bergmann <[email protected]>
mwifiex: re-fix for unaligned accessesChristophe JAILLET <[email protected]>
tty: nozomi: Fix a resource leak in an error handling functionPaul E. McKenney <[email protected]>
rcu: Invokercu_spawn_core_kthreads()fromrcu_spawn_gp_kthread()Andy Shevchenko <[email protected]>
staging: fbtft: Rectify GPIO handlingWei Li <[email protected]>
MIPS: Fix PKMAP with 32-bit MIPS huge page supportLeon Romanovsky <[email protected]>
RDMA/mlx5: Don't access NULL-cleared mpi pointerPavel Skripkin <[email protected]>
net: sched: fix warning intcindex_alloc_perfect_hashVadim Fedorenko <[email protected]>
net: lwtunnel: handle MTU calculation in forwadingMuchun Song <[email protected]>
writeback: fix obtain a reference to a freeing memcg cssRobert Hancock <[email protected]>
clk: si5341: Update initialization magicRobert Hancock <[email protected]>
clk: si5341: Avoid divide errors due to bogus register contentsCristian Ciocaltea <[email protected]>
clk: actions: Fixbisp_factor_tablebased clocks on Owl S500 SoCCristian Ciocaltea <[email protected]>
clk: actions: Fix SD clocks factor table on Owl S500 SoCCristian Ciocaltea <[email protected]>
clk: actions: Fix UART clock dividers on Owl S500 SoCLuiz Augusto von Dentz <[email protected]>
Bluetooth: Fix handling ofHCI_LE_Advertising_Set_TerminatedeventLuiz Augusto von Dentz <[email protected]>
Bluetooth: mgmt: Fix slab-out-of-bounds intlv_data_is_validPetr Oros <[email protected]>
Revert "be2net: disable bh withspin_lockinbe_process_mcc"Bailey Forrest <[email protected]>
gve: Fix swapped vars when fetching max queuesGary Lin <[email protected]>
bpfilter: Specify the log level for the kmsg messageSasha Neftin <[email protected]>
e1000e: Check the PCIm stateEric Dumazet <[email protected]>
ipv6: fix out-of-bound access inip6_parse_tlv()Sukadev Bhattiprolu <[email protected]>
ibmvnic: freetx_pooliftso_poolalloc failsDany Madden <[email protected]>
Revert "ibmvnic: remove duplicatenapi_schedulecall in open function"Mateusz Palczewski <[email protected]>
i40e: Fix autoneg disabling for non-10GBaseT linksDinghao Liu <[email protected]>
i40e: Fix error handling ini40e_vsi_openMaciej Żenczykowski <[email protected]>
bpf: Do not changegso_sizeduringbpf_skb_change_proto()Eric Dumazet <[email protected]>
ipv6: exthdrs: do not blindly useinit_netJian-Hong Pan <[email protected]>
net: bcmgenet: Fix attaching to PYH failed on RPi 4BPing-Ke Shih <[email protected]>
mac80211: remove iwlwifi specific workaround NDPs ofnull_responseEric Dumazet <[email protected]>
ieee802154: hwsim: avoid possible crash inhwsim_del_edge_nl()Dongliang Mu <[email protected]>
ieee802154: hwsim: Fix memory leak inhwsim_add_oneMarcelo Ricardo Leitner <[email protected]>
tc-testing: fix list handlingMiao Wang <[email protected]>
net/ipv4: swap flow ports when validating sourceEric Dumazet <[email protected]>
vxlan: add missingrcu_read_lock()inneigh_reduce()Eric Dumazet <[email protected]>
pkt_sched:sch_qfq: fixqfq_change_class()error pathJakub Kicinski <[email protected]>
tls: prevent oversizedsendfile()hangs by ignoringMSG_MOREYunsheng Lin <[email protected]>
net: sched: add barrier to ensure correct ordering for lockless qdiscAntoine Tenart <[email protected]>
vrf: do not push non-ND strict packets with a source LLA through packet taps againPavel Skripkin <[email protected]>
net: ethernet: ezchip: fix error handlingPavel Skripkin <[email protected]>
net: ethernet: ezchip: fix UAF innps_enet_removePavel Skripkin <[email protected]>
net: ethernet: aeroflex: fix UAF ingreth_of_removeWang Hai <[email protected]>
samples/bpf: Fix the error return code of xdp_redirect'smain()Bob Pearson <[email protected]>
RDMA/rxe: Fix qp reference counting for atomic opsPablo Neira Ayuso <[email protected]>
netfilter:nft_tproxy: restrict support to TCP and UDP transport protocolsPablo Neira Ayuso <[email protected]>
netfilter:nft_osf: check for TCP packet before further processingPablo Neira Ayuso <[email protected]>
netfilter:nft_exthdr: check for IPv6 packet before further processingLeon Romanovsky <[email protected]>
RDMA/mlx5: Don't add slave port to unaffiliated listLiu Shixin <[email protected]>
netlabel: Fix memory leak innetlbl_mgmt_add_commonYang Li <[email protected]>
ath10k: Fix an error code inath10k_add_interface()Christophe JAILLET <[email protected]>
brcmsmac:mac80211_if: Fix a resource leak in an error handling pathAlvin Šipraga <[email protected]>
brcmfmac: correctly report average RSSI in station infoAlvin Šipraga <[email protected]>
brcmfmac: fix setting of station info chains bitmaskZhen Lei <[email protected]>
ssb: Fix error return code inssb_bus_scan()Bryan O'Donoghue <[email protected]>
wcn36xx: Movehal_bufallocation todevm_kmallocin probeDongliang Mu <[email protected]>
ieee802154: hwsim: Fix possible memory leak inhwsim_subscribe_all_othersRandy Dunlap <[email protected]>
wireless: carl9170: fix LEDS build errors & warningsYang Yingliang <[email protected]>
ath10k: add missing error return code inath10k_pci_probe()Yang Yingliang <[email protected]>
ath10k: go to patherr_unsupportedwhen chip id is not supportedZhihao Cheng <[email protected]>
tools/bpftool: Fix error return code indo_batch()Colin Ian King <[email protected]>
drm: qxl: ensure surf.data is ininitializedKamal Heib <[email protected]>
RDMA/rxe: Fix failure during driver loadLeon Romanovsky <[email protected]>
RDMA/core: Sanitize WQ state received from the userspaceBoris Sukholitko <[email protected]>
net/sched:act_vlan: Fix modify to allow 0Zhen Lei <[email protected]>
ehea: fix error return code inehea_restart_qps()Thomas Hebb <[email protected]>
drm/rockchip: dsi: move all lane config except LCDC mux tobind()Yang Yingliang <[email protected]>
drm/rockchip: cdn-dp-core: add missingclk_disable_unprepare()on error incdn_dp_grf_write()Yang Yingliang <[email protected]>
net: ftgmac100: add missing error return code inftgmac100_probe()Jerome Brunet <[email protected]>
clk: meson: g12a: fix gp0 and hifi rangesGeert Uytterhoeven <[email protected]>
pinctrl: renesas: r8a77990: JTAG pins do not have pull-down capabilitiesGeert Uytterhoeven <[email protected]>
pinctrl: renesas: r8a7796: Add missing bias for PRESET# pinAndy Shevchenko <[email protected]>
net:pch_gbe: Propagate error fromdevm_gpio_request_one()Andy Shevchenko <[email protected]>
net: mvpp2: Put fwnode in error case during ->probe()Christophe JAILLET <[email protected]>
video: fbdev: imxfb: Fix an error messageSabrina Dubroca <[email protected]>
xfrm:xfrm_state_mtushould return at least 1280 for ipv6Jan Kara <[email protected]>
dax: fix ENOMEM handling ingrab_mapping_entry()Dan Carpenter <[email protected]>
ocfs2: fixsnprintf()checkingRafael J. Wysocki <[email protected]>
cpufreq: Make cpufreq_online() call driver->offline() on errorsNathan Chancellor <[email protected]>
ACPI: bgrt: Fix CFI violationDwaipayan Ray <[email protected]>
ACPI: Use DEVICE_ATTR_<RW|RO|WO> macrosZhang Yi <[email protected]>
blk-wbt: make sure throttle is enabled properlyZhang Yi <[email protected]>
blk-wbt: introduce a new disable state to prevent false positive byrwb_enabled()Matti Vaittinen <[email protected]>
extcon: extcon-max8997: Fix IRQ freeing at error pathKrzysztof Wilczyński <[email protected]>
ACPI: sysfs: Fix a buffer overrun problem withdescription_show()Herbert Xu <[email protected]>
crypto: nx - Fix RCU warning innx842_OF_upd_statusMirko Vogt <mirko-dev|[email protected]>
spi: spi-sun6i: Fix chipselect/clock bugQais Yousef <[email protected]>
sched/uclamp: Fixuclamp_tg_restrict()Vincent Donnefort <[email protected]>
sched/rt: Fix Deadline utilization tracking during policy changeVincent Donnefort <[email protected]>
sched/rt: Fix RT utilization tracking during policy changeDavid Sterba <[email protected]>
btrfs: clear log tree recovering status if starting transaction failsAxel Lin <[email protected]>
regulator: hi655x: Fix pass wrong pointer to config.driver_dataSean Christopherson <[email protected]>
KVM: nVMX: Ensure 64-bit shift when checking VMFUNC bitmapGuenter Roeck <[email protected]>
hwmon: (max31790) Fix fan speed reporting for fan7..12Guenter Roeck <[email protected]>
hwmon: (max31722) Remove non-standard ACPI device IDsDillon Min <[email protected]>
media: s5p-g2d: Fix a memory leak on ctx->fh.m2m_ctxAnshuman Khandual <[email protected]>
arm64/mm: Fix ttbr0 values stored in structthread_infofor software-panMark Rutland <[email protected]>
arm64: consistently usereserved_pg_dirZhen Lei <[email protected]>
mmc: usdhi6rol0: fix error return code inusdhi6_probe()Zhang Qilong <[email protected]>
crypto: omap-sham - Fix PM reference leak in omap sham opsTong Tiangen <[email protected]>
crypto: nitrox - fix unchecked variable innitrox_register_interruptsGustavo A. R. Silva <[email protected]>
media: siano: Fix out-of-bounds warnings insmscore_load_firmware_family2()Randy Dunlap <[email protected]>
m68k: atari: FixATARI_KBD_COREkconfig unmet dependency warningJohan Hovold <[email protected]>
media: gspca/gl860: fix zero-length control requestsZhen Lei <[email protected]>
media: tc358743: Fix error return code in tc358743_probe_of()Dan Carpenter <[email protected]>
media: au0828: fix a NULL vsIS_ERR()checkLv Yunlong <[email protected]>
media: exynos4-is: Fix a use after free inisp_video_releaseSergey Shtylyov <[email protected]>
pata_ep93xx: fix deferred probingChristophe JAILLET <[email protected]>
media: rc: i2c: Fix an error messageChristophe JAILLET <[email protected]>
crypto: ccp - Fix a resource leak in an error handling pathMimi Zohar <[email protected]>
evm: fix writing <securityfs>/evm overflowSergey Shtylyov <[email protected]>
pata_octeon_cf: avoidWARN_ON()inata_host_activate()Josh Poimboeuf <[email protected]>
kbuild: Fix objtool dependency for 'OBJECT_FILES_NON_STANDARD_<obj> := n'Luc Van Oostenryck <[email protected]>
kbuild: run the checker after the compilerQais Yousef <[email protected]>
sched/uclamp: Fix locking aroundcpu_util_update_eff()Qais Yousef <[email protected]>
sched/uclamp: Fix wrong implementation of cpu.uclamp.minRandy Dunlap <[email protected]>
media: I2C: change 'RST' to "RSET" to fix multiple build errorsSergey Shtylyov <[email protected]>
pata_rb532_cf: fix deferred probingSergey Shtylyov <[email protected]>
sata_highbank: fix deferred probingZhen Lei <[email protected]>
crypto: ux500 - Fix error return code inhash_hw_final()Corentin Labbe <[email protected]>
crypto: ixp4xx -dma_unmapthe correct addressMauro Carvalho Chehab <[email protected]>
media:s5p_cec: decrement usage count if disabledRoman Gushchin <[email protected]>
writeback, cgroup: incrementisw_nr_in_flightbefore grabbing an inodeArnd Bergmann <[email protected]>
ia64:mca_drv: fix incorrect array size calculationPetr Mladek <[email protected]>
kthread_worker: fix return value whenkthread_mod_delayed_work()races withkthread_cancel_delayed_work_sync()Ming Lei <[email protected]>
block: fix discard request mergeSteve French <[email protected]>
cifs: fix missing spinlock around update to ses->statusJason Gerecke <[email protected]>
HID: wacom: Correct base usage for capacitive ExpressKey status bitsRichard Fitzgerald <[email protected]>
ACPI: tables: Add custom DSDT file as makefile prerequisitePaul E. McKenney <[email protected]>
clocksource: Retry clock read if long delays detectedHaiyang Zhang <[email protected]>
PCI: hv: Add check forhyperv_initializedininit_hv_pci_drv()Tony Luck <[email protected]>
EDAC/Intel: Do not load EDAC driver when running as a guestHannes Reinecke <[email protected]>
nvmet-fc: do not check for invalid target port innvmet_fc_handle_fcp_rqst()Jiapeng Chong <[email protected]>
platform/x86:toshiba_acpi: Fix missing error code intoshiba_acpi_setup_keyboard()Ming Lei <[email protected]>
block: fix race between adding/removing rq qos and normal IOHui Wang <[email protected]>
ACPI: resources: Add checks for ACPI IRQ overrideHanjun Guo <[email protected]>
ACPI: bus: Callkobject_put()inacpi_init()error pathErik Kaneda <[email protected]>
ACPICA: Fix memory leak caused by_CIDrepair functionAlexander Aring <[email protected]>
fs: dlm: fix memory leak when fencedRichard Fitzgerald <[email protected]>
random32: Fix implicit truncation warning inprandom_seed_state()Alexander Aring <[email protected]>
fs: dlm: cancel work sync otherconzhangyi (F) <[email protected]>
block_dump: removeblock_dumpfeature inmark_inode_dirty()Chris Chiu <[email protected]>
ACPI: EC: Make more Asus laptops use ECDT_GPERichard Fitzgerald <[email protected]>
lib: vsprintf: Fix handling of number field widths in vsscanfYueHaibing <[email protected]>
hv_utils: Fix passing zero to 'PTR_ERR' warningMario Limonciello <[email protected]>
ACPI: processor idle: Fix up C-state latency if not orderedBixuan Cui <[email protected]>
EDAC/ti: Add missingMODULE_DEVICE_TABLEDmitry Torokhov <[email protected]>
HID: do not usedown_interruptible()when unbinding devicesShuah Khan <[email protected]>
media: Fix Media Controller API config checksAxel Lin <[email protected]>
regulator: da9052: Ensure enough delay time for .set_voltage_time_selHsin-Hsiung Wang <[email protected]>
regulator: mt6358: Fix vdram2 .vsel_maskHeiko Carstens <[email protected]>
KVM: s390: get rid of register asm usageBoqun Feng <[email protected]>
lockding/lockdep: Avoid to find wrong lock dep path incheck_irq_usage()Boqun Feng <[email protected]>
locking/lockdep: Fix the dep path printing for backwards BFSChristophe Leroy <[email protected]>
btrfs: disable build on platforms having page size 256KJosef Bacik <[email protected]>
btrfs: abort transaction if we fail to update the delayed inodeJosef Bacik <[email protected]>
btrfs: fix error handling in__btrfs_update_delayed_inodeSuraj Jitindar Singh <[email protected]>
KVM: PPC: Book3S HV: Fix TLB management on SMT8 POWER9 and POWER10 processorsJing Xiangfeng <[email protected]>
drivers/perf: fix the missedida_simple_remove()inddr_perf_probe()Guenter Roeck <[email protected]>
hwmon: (max31790) FixpwmX_enableattributesGuenter Roeck <[email protected]>
hwmon: (max31790) Report correct current pwm duty cyclesSteve Longerbeam <[email protected]>
media: imx-csi: Skip first few frames from a BT.656 sourceMauro Carvalho Chehab <[email protected]>
media: siano: fix device register error pathMauro Carvalho Chehab <[email protected]>
media:dvb_net: avoid speculation from net slotArd Biesheuvel <[email protected]>
crypto: shash - avoid comparing pointers to exported functions under CFIZheyu Ma <[email protected]>
mmc: via-sdmmc: add a check against NULL pointer dereferenceKrzysztof Kozlowski <[email protected]>
mmc: sdhci-sprd: usesdhci_sprd_writewTong Zhang <[email protected]>
memstick:rtsx_usb_ms: fix UAFDongliang Mu <[email protected]>
media:dvd_usb: memory leak incinergyt2_fe_attachNick Desaulniers <[email protected]>
Makefile: fix GDB warning withCONFIG_RELREvgeny Novikov <[email protected]>
media: st-hva: Fix potential NULL pointer dereferencesZheyu Ma <[email protected]>
media: bt8xx: Fix a missing check bug inbt878_probeLv Yunlong <[email protected]>
media: v4l2-core: Avoid the dangling pointer inv4l2_fh_releaseIgor Matheus Andrade Torrente <[email protected]>
media: em28xx: Fix possible memory leak of em28xx structOdin Ugedal <[email protected]>
sched/fair: Fix ascii art by relpacing tabsJack Xu <[email protected]>
crypto: qat - remove unused macro in FW loaderJack Xu <[email protected]>
crypto: qat - check return code ofqat_hal_rd_rel_reg()Laurent Pinchart <[email protected]>
media: imx:imx7_mipi_csis: Fix logging of only error event countersAnirudh Rayabharam <[email protected]>
media: pvrusb2: fix warning inpvr2_i2c_core_doneHans Verkuil <[email protected]>
media: cobalt: fix race condition in setting HPDPavel Skripkin <[email protected]>
media: cpia2: fix memory leak incpia2_usb_probeMauro Carvalho Chehab <[email protected]>
media: sti: fix obj-$(config) targetsBixuan Cui <[email protected]>
crypto: nx - add missingMODULE_DEVICE_TABLEŁukasz Stelmach <[email protected]>
hwrng: exynos - Fix runtime PM imbalance on errorZou Wei <[email protected]>
regulator: uniphier: Add missingMODULE_DEVICE_TABLETian Tao <[email protected]>
spi: omap-100k: Fix the length judgment problemJay Fang <[email protected]>
spi: spi-topcliff-pch: Fix potential double free inpch_spi_process_messages()Jay Fang <[email protected]>
spi: spi-loopback-test: Fix 'tx_buf' might be 'rx_buf'Mauro Carvalho Chehab <[email protected]>
media: exynos-gsc: fixpm_runtime_get_sync()usage countMauro Carvalho Chehab <[email protected]>
media: sti/bdisp: fixpm_runtime_get_sync()usage countMauro Carvalho Chehab <[email protected]>
media: s5p-jpeg: fixpm_runtime_get_sync()usage countMauro Carvalho Chehab <[email protected]>
media: mtk-vcodec: fix PM runtime get logicMauro Carvalho Chehab <[email protected]>
media:sh_vou: fixpm_runtime_get_sync()usage countMauro Carvalho Chehab <[email protected]>
media: s5p: fixpm_runtime_get_sync()usage countMauro Carvalho Chehab <[email protected]>
media: mdk-mdp: fixpm_runtime_get_sync()usage countCharles Keepax <[email protected]>
spi: Makeof_register_spi_devicealso set the fwnodeMiklos Szeredi <[email protected]>
fuse: reject internal errnoMiklos Szeredi <[email protected]>
fuse: check connected before queueing on fpq->ioMiklos Szeredi <[email protected]>
fuse: ignorePG_workingsetafter stealingRoberto Sassu <[email protected]>
evm: RefuseEVM_ALLOW_METADATA_WRITESonly if an HMAC key is loadedRoberto Sassu <[email protected]>
evm: Executeevm_inode_init_security()only when an HMAC key is loadedMichael Ellerman <[email protected]>
powerpc/stacktrace: Fix spurious "stale" traces inraise_backtrace_ipi()Yun Zhou <[email protected]>
seq_buf: Maketrace_seq_putmem_hex()support data longer than 8Steven Rostedt (VMware) <[email protected]>
tracepoint: Addtracepoint_probe_register_may_exist()for BPF tracingSteven Rostedt (VMware) <[email protected]>
tracing/histograms: Fix parsing of "sym-offset" modifierMartin Fuzzey <[email protected]>
rsi: fix AP mode with WPA failure due to encrypted EAPOLMarek Vasut <[email protected]>
rsi: Assign beacon rate settings to the correctrate_infodescriptor fieldMichael Buesch <[email protected]>
ssb: sdio: Don't overwrite const buffer ifblock_writefailsPali Rohár <[email protected]>
ath9k: Fix kernel NULL pointer dereference duringath_reset_internal()Ondrej Zary <[email protected]>
serial_cs: remove wrong GLOBETROTTER.cis entryOndrej Zary <[email protected]>
serial_cs: Add Option International GSM-Ready 56K/ISDN modemYoshihiro Shimoda <[email protected]>
serial: sh-sci: Stop dmaengine transfer insci_stop_tx()Pali Rohár <[email protected]>
serial: mvebu-uart: fix calculation of clock divisorOliver Lang <[email protected]>
iio: ltr501:ltr501_read_ps(): add missing endianness conversionOliver Lang <[email protected]>
iio: ltr501: ltr559: fix initialization ofLTR501_ALS_CONTRMarc Kleine-Budde <[email protected]>
iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} andPS_DATAas volatile, toofrank zago <[email protected]>
iio: light: tcs3472: do not free unallocated IRQMartin Fuzzey <[email protected]>
rtc: stm32: Fix unbalancedclk_disable_unprepare()on probe error pathVineeth Vijayan <[email protected]>
s390/cio: dont callcss_wait_for_slow_path()inside a lockNathan Chancellor <[email protected]>
KVM: PPC: Book3S HV: Workaround high stack usage with clangRobin Murphy <[email protected]>
perf/smmuv3: Don't trample existing events with global filterZhang Xiaoxu <[email protected]>
SUNRPC: Should wake up the privileged task firstly.Zhang Xiaoxu <[email protected]>
SUNRPC: Fix the batch tasks count wraparound.Felix Fietkau <[email protected]>
mac80211: remove iwlwifi specific workaround that broke sta NDP txStephane Grosjean <[email protected]>
can:peak_pciefd:pucan_handle_status(): fix a potential starvation issue in TX pathOleksij Rempel <[email protected]>
can: j1939:j1939_sk_init(): setSOCK_RCU_FREEto callsk_destruct()after RCU is doneOliver Hartkopp <[email protected]>
can: gw: synchronize rcu operations before removing gw job entryThadeu Lima de Souza Cascardo <[email protected]>
can: bcm: delay release of structbcm_opaftersynchronize_rcu()Stephen Brennan <[email protected]>
ext4: useext4_grp_locked_errorinmb_find_extentPan Dong <[email protected]>
ext4: fix avefreec infind_group_orlovZhang Yi <[email protected]>
ext4: remove check for zeronr_to_scaninext4_es_scan()Zhang Yi <[email protected]>
ext4: correct thecache_nrin tracepointext4_es_shrink_exitYang Yingliang <[email protected]>
ext4: return error code whenext4_fill_flex_info()failsAnirudh Rayabharam <[email protected]>
ext4: fix kernel infoleak viaext4_extent_headerZhang Yi <[email protected]>
ext4: cleanup in-core orphan list ifext4_truncate()failed to get a transaction handleDavid Sterba <[email protected]>
btrfs: clear defrag status of a root if starting transaction failsFilipe Manana <[email protected]>
btrfs: send: fix invalid path for unlink operations after parent orphanizationLudovic Desroches <[email protected]>
ARM: dts: at91: sama5d4: fix pinctrl muxingYang Jihong <[email protected]>
arm_pmu: Fix write counter incorrect in ARMv7 big-endian modeAlexander Larkin <[email protected]>
Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctlAl Viro <[email protected]>
iov_iter_fault_in_readable()should do nothing in xarray caseAl Viro <[email protected]>
copy_page_to_iter(): fixITER_DISCARDcaseDesmond Cheong Zhi Xi <[email protected]>
ntfs: fix validity check for file name attributeZhangjiantao (Kirin, nanjing) <[email protected]>
xhci: solve a double free problem while doing s4Jing Xiangfeng <[email protected]>
usb: typec: Add the missedaltmode_id_remove()intypec_register_altmode()Minas Harutyunyan <[email protected]>
usb: dwc3: Fix debugfs creation flowHannu Hartikainen <[email protected]>
USB: cdc-acm: blacklist Heimann USB Appset deviceLinyu Yuan <[email protected]>
usb: gadget: eem: fix echo command packet response issuePavel Skripkin <[email protected]>
net: can:ems_usb: fix use-after-free inems_usb_disconnect()Johan Hovold <[email protected]>
Input: usbtouchscreen - fix control-request directionsPavel Skripkin <[email protected]>
media: dvb-usb: fix wrong definitionTakashi Iwai <[email protected]>
ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, tooTakashi Iwai <[email protected]>
ALSA: hda/realtek: Fix bass speaker DAC mapping for Asus UM431DElia Devito <[email protected]>
ALSA: hda/realtek: Improve fixup for HP Spectre x360 15-df0xxxTakashi Iwai <[email protected]>
ALSA: hda/realtek: Add another ALC236 variant supportTakashi Iwai <[email protected]>
ALSA: intel8x0: Fix breakage at ac97 clock measurementTakashi Iwai <[email protected]>
ALSA: usb-audio: scarlett2: Fix wrong resume callTakashi Iwai <[email protected]>
ALSA: usb-audio: Fix OOB access at proc outputDaehwan Jung <[email protected]>
ALSA: usb-audio: fix rate on Ozone Z90 USB headset-------------
Diffstat:
Documentation/ABI/testing/evm | 26 ++++- Documentation/admin-guide/kernel-parameters.txt | 6 ++ Documentation/hwmon/max31790.rst | 5 +- Makefile | 6 +- arch/arm/boot/dts/sama5d4.dtsi | 2 +- arch/arm/kernel/perf_event_v7.c | 4 +- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +- arch/arm64/include/asm/asm-uaccess.h | 4 +- arch/arm64/include/asm/kernel-pgtable.h | 6 -- arch/arm64/include/asm/mmu_context.h | 8 +- arch/arm64/include/asm/pgtable.h | 1 + arch/arm64/include/asm/uaccess.h | 4 +- arch/arm64/kernel/entry.S | 6 +- arch/arm64/kernel/setup.c | 2 +- arch/arm64/kernel/vmlinux.lds.S | 8 +- arch/arm64/mm/proc.S | 2 +- arch/ia64/kernel/mca_drv.c | 2 +- arch/m68k/Kconfig.machine | 3 + arch/mips/include/asm/highmem.h | 2 +- arch/powerpc/include/asm/cputhreads.h | 30 ++++++ arch/powerpc/kernel/smp.c | 11 ++ arch/powerpc/kernel/stacktrace.c | 26 +++-- arch/powerpc/kvm/book3s_hv.c | 13 +-- arch/powerpc/kvm/book3s_hv_builtin.c | 2 +- arch/powerpc/kvm/book3s_hv_nested.c | 3 +- arch/powerpc/kvm/book3s_hv_rm_mmu.c | 2 +- arch/s390/Kconfig | 2 +- arch/s390/kvm/kvm-s390.c | 18 ++-- arch/x86/kvm/vmx/nested.c | 2 +- block/blk-merge.c | 8 +- block/blk-rq-qos.h | 24 +++++ block/blk-wbt.c | 11 +- block/blk-wbt.h | 1 + crypto/shash.c | 18 +++- drivers/acpi/Makefile | 5 + drivers/acpi/acpi_pad.c | 24 ++--- drivers/acpi/acpi_tad.c | 14 +-- drivers/acpi/acpica/nsrepair2.c | 7 ++ drivers/acpi/bgrt.c | 57 ++++------ drivers/acpi/bus.c | 1 + drivers/acpi/device_sysfs.c | 46 ++++---- drivers/acpi/dock.c | 26 ++--- drivers/acpi/ec.c | 16 +++ drivers/acpi/power.c | 9 +- drivers/acpi/processor_idle.c | 40 +++++++ drivers/acpi/resource.c | 9 +- drivers/ata/pata_ep93xx.c | 2 +- drivers/ata/pata_octeon_cf.c | 5 +- drivers/ata/pata_rb532_cf.c | 6 +- drivers/ata/sata_highbank.c | 6 +- drivers/char/hw_random/exynos-trng.c | 4 +- drivers/char/pcmcia/cm4000_cs.c | 4 + drivers/clk/actions/owl-s500.c | 62 ++++++----- drivers/clk/clk-si5341.c | 19 +++- drivers/clk/meson/g12a.c | 2 +- drivers/cpufreq/cpufreq.c | 11 +- drivers/crypto/cavium/nitrox/nitrox_isr.c | 4 + drivers/crypto/ccp/sp-pci.c | 6 +- drivers/crypto/ixp4xx_crypto.c | 2 +- drivers/crypto/nx/nx-842-pseries.c | 9 +- drivers/crypto/omap-sham.c | 4 +- drivers/crypto/qat/qat_common/qat_hal.c | 6 +- drivers/crypto/qat/qat_common/qat_uclo.c | 1 - drivers/crypto/ux500/hash/hash_core.c | 1 + drivers/edac/i10nm_base.c | 3 + drivers/edac/pnd2_edac.c | 3 + drivers/edac/sb_edac.c | 3 + drivers/edac/skx_base.c | 3 + drivers/edac/ti_edac.c | 1 + drivers/extcon/extcon-max8997.c | 3 +- drivers/extcon/extcon-sm5502.c | 1 - drivers/firmware/stratix10-svc.c | 22 ++-- drivers/fsi/fsi-core.c | 4 +- drivers/fsi/fsi-occ.c | 1 + drivers/fsi/fsi-sbefifo.c | 10 +- drivers/fsi/fsi-scom.c | 16 +-- drivers/gpu/drm/qxl/qxl_dumb.c | 2 + drivers/gpu/drm/rockchip/cdn-dp-core.c | 1 + drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 36 +++++-- drivers/hid/hid-core.c | 10 +- drivers/hid/wacom_wac.h | 2 +- drivers/hv/hv_util.c | 4 +- drivers/hwmon/max31722.c | 9 -- drivers/hwmon/max31790.c | 49 +++++---- drivers/iio/accel/bma180.c | 10 +- drivers/iio/accel/bma220_spi.c | 10 +- drivers/iio/accel/hid-sensor-accel-3d.c | 13 ++- drivers/iio/accel/kxcjk-1013.c | 24 +++-- drivers/iio/accel/mxc4005.c | 12 ++- drivers/iio/accel/stk8312.c | 12 ++- drivers/iio/accel/stk8ba50.c | 17 ++- drivers/iio/adc/at91-sama5d2_adc.c | 33 +++--- drivers/iio/adc/hx711.c | 4 +- drivers/iio/adc/mxs-lradc-adc.c | 3 +- drivers/iio/adc/ti-ads1015.c | 12 ++- drivers/iio/adc/ti-ads8688.c | 3 +- drivers/iio/adc/vf610_adc.c | 10 +- drivers/iio/gyro/bmg160_core.c | 10 +- drivers/iio/humidity/am2315.c | 16 +-- drivers/iio/imu/adis16400.c | 3 - drivers/iio/imu/adis_buffer.c | 3 - drivers/iio/light/isl29125.c | 10 +- drivers/iio/light/ltr501.c | 15 ++- drivers/iio/light/tcs3414.c | 10 +- drivers/iio/light/tcs3472.c | 16 ++- drivers/iio/light/vcnl4035.c | 3 +- drivers/iio/magnetometer/bmc150_magn.c | 11 +- drivers/iio/magnetometer/hmc5843.h | 8 +- drivers/iio/magnetometer/hmc5843_core.c | 4 +- drivers/iio/magnetometer/rm3100-core.c | 3 +- drivers/iio/potentiostat/lmp91000.c | 4 +- drivers/iio/proximity/as3935.c | 10 +- drivers/iio/proximity/isl29501.c | 2 +- drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 10 +- drivers/iio/proximity/srf08.c | 14 +-- drivers/infiniband/core/uverbs_cmd.c | 21 +++- drivers/infiniband/hw/mlx4/qp.c | 9 +- drivers/infiniband/hw/mlx5/main.c | 4 +- drivers/infiniband/hw/mlx5/qp.c | 6 +- drivers/infiniband/sw/rxe/rxe_net.c | 10 +- drivers/infiniband/sw/rxe/rxe_qp.c | 1 - drivers/infiniband/sw/rxe/rxe_resp.c | 2 - drivers/input/joydev.c | 2 +- drivers/input/keyboard/Kconfig | 3 - drivers/input/keyboard/hil_kbd.c | 1 + drivers/input/touchscreen/usbtouchscreen.c | 8 +- drivers/iommu/dma-iommu.c | 6 +- drivers/leds/Kconfig | 1 + drivers/leds/leds-as3645a.c | 1 + drivers/leds/leds-ktd2692.c | 27 +++-- drivers/leds/leds-lm36274.c | 82 +++++++------- drivers/leds/leds-lm3692x.c | 8 +- drivers/media/common/siano/smscoreapi.c | 22 ++-- drivers/media/common/siano/smscoreapi.h | 4 +- drivers/media/common/siano/smsdvb-main.c | 4 + drivers/media/dvb-core/dvb_net.c | 25 +++-- drivers/media/i2c/ir-kbd-i2c.c | 4 +- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 6 +- drivers/media/i2c/s5c73m3/s5c73m3.h | 2 +- drivers/media/i2c/s5k4ecgx.c | 10 +- drivers/media/i2c/s5k5baf.c | 6 +- drivers/media/i2c/s5k6aa.c | 10 +- drivers/media/i2c/tc358743.c | 1 + drivers/media/mc/Makefile | 2 +- drivers/media/pci/bt8xx/bt878.c | 3 + drivers/media/pci/cobalt/cobalt-driver.c | 1 + drivers/media/pci/cobalt/cobalt-driver.h | 7 +- drivers/media/platform/exynos-gsc/gsc-m2m.c | 4 +- drivers/media/platform/exynos4-is/fimc-isp-video.c | 7 +- drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c | 6 +- .../media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 4 +- .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 8 +- .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 2 +- drivers/media/platform/s5p-cec/s5p_cec.c | 7 +- drivers/media/platform/s5p-g2d/g2d.c | 3 + drivers/media/platform/s5p-jpeg/jpeg-core.c | 5 +- drivers/media/platform/sh_vou.c | 6 +- drivers/media/platform/sti/bdisp/Makefile | 2 +- drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 7 +- drivers/media/platform/sti/delta/Makefile | 2 +- drivers/media/platform/sti/hva/Makefile | 2 +- drivers/media/platform/sti/hva/hva-hw.c | 3 +- drivers/media/usb/au0828/au0828-core.c | 4 +- drivers/media/usb/cpia2/cpia2.h | 1 + drivers/media/usb/cpia2/cpia2_core.c | 12 +++ drivers/media/usb/cpia2/cpia2_usb.c | 13 +-- drivers/media/usb/dvb-usb/cinergyT2-core.c | 2 + drivers/media/usb/dvb-usb/cxusb.c | 2 +- drivers/media/usb/em28xx/em28xx-input.c | 8 +- drivers/media/usb/gspca/gl860/gl860.c | 4 +- drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 4 +- drivers/media/v4l2-core/v4l2-fh.c | 1 + drivers/memstick/host/rtsx_usb_ms.c | 10 +- drivers/misc/eeprom/idt_89hpesx.c | 8 +- drivers/mmc/core/block.c | 8 ++ drivers/mmc/host/sdhci-sprd.c | 1 + drivers/mmc/host/usdhi6rol0.c | 1 + drivers/mmc/host/via-sdmmc.c | 3 + drivers/mmc/host/vub300.c | 2 +- drivers/mtd/nand/raw/marvell_nand.c | 4 +- drivers/mtd/parsers/redboot.c | 7 +- drivers/net/can/peak_canfd/peak_canfd.c | 4 +- drivers/net/can/usb/ems_usb.c | 3 +- drivers/net/ethernet/aeroflex/greth.c | 3 +- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 + drivers/net/ethernet/emulex/benet/be_cmds.c | 6 +- drivers/net/ethernet/emulex/benet/be_main.c | 2 + drivers/net/ethernet/ezchip/nps_enet.c | 4 +- drivers/net/ethernet/faraday/ftgmac100.c | 6 +- drivers/net/ethernet/google/gve/gve_main.c | 4 +- drivers/net/ethernet/ibm/ehea/ehea_main.c | 9 +- drivers/net/ethernet/ibm/ibmvnic.c | 10 +- drivers/net/ethernet/intel/e1000e/netdev.c | 24 +++-- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 +- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 + drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 + .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 10 +- drivers/net/ieee802154/mac802154_hwsim.c | 11 +- drivers/net/vrf.c | 14 +-- drivers/net/vxlan.c | 2 + drivers/net/wireless/ath/ath10k/mac.c | 1 + drivers/net/wireless/ath/ath10k/pci.c | 14 ++- drivers/net/wireless/ath/ath9k/main.c | 5 + drivers/net/wireless/ath/carl9170/Kconfig | 8 +- drivers/net/wireless/ath/wcn36xx/main.c | 21 ++-- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 37 ++++--- .../broadcom/brcm80211/brcmsmac/mac80211_if.c | 8 +- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 3 + drivers/net/wireless/marvell/mwifiex/pcie.c | 10 +- drivers/net/wireless/rsi/rsi_91x_hal.c | 6 +- drivers/net/wireless/rsi/rsi_91x_mac80211.c | 3 - drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 +- drivers/net/wireless/rsi/rsi_main.h | 1 - drivers/nvme/target/fc.c | 10 +- drivers/of/fdt.c | 8 +- drivers/of/of_reserved_mem.c | 8 +- drivers/pci/controller/pci-hyperv.c | 3 + drivers/perf/arm_smmuv3_pmu.c | 18 ++-- drivers/perf/fsl_imx8_ddr_perf.c | 6 +- drivers/phy/socionext/phy-uniphier-pcie.c | 11 +- drivers/phy/ti/phy-dm816x-usb.c | 17 ++- drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 3 +- drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 8 +- drivers/platform/x86/toshiba_acpi.c | 1 + drivers/regulator/da9052-regulator.c | 3 +- drivers/regulator/hi655x-regulator.c | 16 +-- drivers/regulator/mt6358-regulator.c | 2 +- drivers/regulator/uniphier-regulator.c | 1 + drivers/rtc/rtc-stm32.c | 6 +- drivers/s390/cio/chp.c | 3 + drivers/s390/cio/chsc.c | 2 - drivers/scsi/FlashPoint.c | 32 +++--- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +- drivers/scsi/scsi_lib.c | 1 + drivers/soundwire/stream.c | 13 ++- drivers/spi/spi-loopback-test.c | 2 +- drivers/spi/spi-omap-100k.c | 2 +- drivers/spi/spi-sun6i.c | 6 +- drivers/spi/spi-topcliff-pch.c | 4 +- drivers/spi/spi.c | 1 + drivers/ssb/scan.c | 1 + drivers/ssb/sdio.c | 1 - drivers/staging/fbtft/fb_agm1264k-fl.c | 20 ++-- drivers/staging/fbtft/fb_bd663474.c | 4 - drivers/staging/fbtft/fb_ili9163.c | 4 - drivers/staging/fbtft/fb_ili9320.c | 1 - drivers/staging/fbtft/fb_ili9325.c | 4 - drivers/staging/fbtft/fb_ili9340.c | 1 - drivers/staging/fbtft/fb_s6d1121.c | 4 - drivers/staging/fbtft/fb_sh1106.c | 1 - drivers/staging/fbtft/fb_ssd1289.c | 4 - drivers/staging/fbtft/fb_ssd1325.c | 2 - drivers/staging/fbtft/fb_ssd1331.c | 6 +- drivers/staging/fbtft/fb_ssd1351.c | 1 - drivers/staging/fbtft/fb_upd161704.c | 4 - drivers/staging/fbtft/fb_watterott.c | 1 - drivers/staging/fbtft/fbtft-bus.c | 3 +- drivers/staging/fbtft/fbtft-core.c | 13 ++- drivers/staging/fbtft/fbtft-io.c | 12 +-- drivers/staging/gdm724x/gdm_lte.c | 20 +++- drivers/staging/media/imx/imx-media-csi.c | 14 ++- drivers/staging/media/imx/imx7-mipi-csis.c | 6 +- drivers/staging/mt7621-dts/mt7621.dtsi | 2 +- drivers/staging/rtl8712/hal_init.c | 3 + drivers/staging/rtl8712/usb_intf.c | 10 +- drivers/target/iscsi/cxgbit/cxgbit_ddp.c | 19 ++-- drivers/target/iscsi/cxgbit/cxgbit_target.c | 21 +++- drivers/tty/nozomi.c | 9 +- drivers/tty/serial/8250/8250_port.c | 19 +++- drivers/tty/serial/8250/serial_cs.c | 2 +- drivers/tty/serial/mvebu-uart.c | 18 ++-- drivers/tty/serial/sh-sci.c | 8 ++ drivers/usb/class/cdc-acm.c | 5 + drivers/usb/dwc2/core.c | 30 ++++-- drivers/usb/dwc3/core.c | 3 +- drivers/usb/gadget/function/f_eem.c | 43 +++++++- drivers/usb/gadget/function/f_fs.c | 65 ++++++----- drivers/usb/host/xhci-mem.c | 1 + drivers/usb/typec/class.c | 4 +- drivers/vfio/pci/vfio_pci.c | 29 +++-- drivers/video/backlight/lm3630a_bl.c | 4 +- drivers/video/fbdev/imxfb.c | 2 +- drivers/visorbus/visorchipset.c | 6 +- fs/btrfs/Kconfig | 2 + fs/btrfs/delayed-inode.c | 18 ++-- fs/btrfs/send.c | 11 ++ fs/btrfs/transaction.c | 6 +- fs/btrfs/tree-log.c | 1 + fs/cifs/cifsglob.h | 3 +- fs/cifs/connect.c | 5 +- fs/configfs/file.c | 10 +- fs/dax.c | 3 +- fs/dlm/config.c | 9 ++ fs/dlm/lowcomms.c | 2 +- fs/ext4/extents.c | 3 + fs/ext4/extents_status.c | 4 +- fs/ext4/ialloc.c | 11 +- fs/ext4/mballoc.c | 9 +- fs/ext4/super.c | 10 +- fs/fs-writeback.c | 39 ++----- fs/fuse/dev.c | 12 ++- fs/ntfs/inode.c | 2 +- fs/ocfs2/filecheck.c | 6 +- fs/ocfs2/stackglue.c | 8 +- include/crypto/internal/hash.h | 8 +- include/linux/bio.h | 12 +-- include/linux/iio/common/cros_ec_sensors_core.h | 2 +- include/linux/prandom.h | 2 +- include/linux/tracepoint.h | 10 ++ include/media/media-dev-allocator.h | 2 +- include/net/ip.h | 12 ++- include/net/ip6_route.h | 16 ++- include/net/sch_generic.h | 12 +++ include/net/tc_act/tc_vlan.h | 1 + include/net/xfrm.h | 1 + kernel/kthread.c | 19 ++-- kernel/locking/lockdep.c | 120 ++++++++++++++++++++- kernel/rcu/tree.c | 2 +- kernel/sched/core.c | 43 ++++---- kernel/sched/deadline.c | 2 + kernel/sched/fair.c | 8 +- kernel/sched/rt.c | 17 ++- kernel/time/clocksource.c | 53 +++++++-- kernel/trace/bpf_trace.c | 3 +- kernel/trace/trace_events_hist.c | 7 ++ kernel/tracepoint.c | 33 +++++- lib/iov_iter.c | 9 +- lib/kstrtox.c | 13 ++- lib/kstrtox.h | 2 + lib/seq_buf.c | 4 +- lib/vsprintf.c | 82 ++++++++------ mm/huge_memory.c | 2 +- mm/z3fold.c | 1 + net/bluetooth/hci_event.c | 13 ++- net/bluetooth/mgmt.c | 3 + net/bpfilter/main.c | 2 +- net/can/bcm.c | 7 +- net/can/gw.c | 3 + net/can/j1939/main.c | 4 + net/can/j1939/socket.c | 3 + net/core/filter.c | 4 - net/ipv4/esp4.c | 2 +- net/ipv4/fib_frontend.c | 2 + net/ipv4/route.c | 3 +- net/ipv6/esp6.c | 2 +- net/ipv6/exthdrs.c | 31 +++--- net/mac80211/mlme.c | 9 -- net/mac80211/sta_info.c | 5 - net/netfilter/nft_exthdr.c | 3 + net/netfilter/nft_osf.c | 5 + net/netfilter/nft_tproxy.c | 9 +- net/netlabel/netlabel_mgmt.c | 19 ++-- net/sched/act_vlan.c | 7 +- net/sched/cls_tcindex.c | 2 +- net/sched/sch_qfq.c | 8 +- net/sunrpc/sched.c | 12 ++- net/tls/tls_sw.c | 2 +- net/xfrm/xfrm_state.c | 14 ++- samples/bpf/xdp_redirect_user.c | 2 +- scripts/Makefile.build | 9 +- scripts/tools-support-relr.sh | 3 +- security/integrity/evm/evm_main.c | 5 +- security/integrity/evm/evm_secfs.c | 13 +-- sound/pci/hda/patch_realtek.c | 43 ++++++-- sound/pci/intel8x0.c | 2 +- sound/soc/atmel/atmel-i2s.c | 34 ++++-- sound/soc/codecs/cs42l42.h | 2 +- sound/soc/codecs/rk3328_codec.c | 28 +++-- sound/soc/hisilicon/hi6210-i2s.c | 14 +-- sound/soc/mediatek/common/mtk-btcvsd.c | 24 +++-- sound/soc/sh/rcar/adg.c | 4 +- sound/usb/format.c | 2 +
Quoted 11 lines
sound/usb/mixer.c | 8 +- sound/usb/mixer.h | 1 + sound/usb/mixer_scarlett_gen2.c | 7 +- tools/bpf/bpftool/main.c | 4 +- tools/perf/util/llvm-utils.c | 2 + .../selftests/tc-testing/plugin-lib/scapyPlugin.py | 2 +- tools/testing/selftests/x86/protection_keys.c | 3 +- 379 files changed, 2313 insertions(+), 1244 deletions(-)
All tests passing for Tegra ...
Test results for stable-v5.4:
10 builds: 10 pass, 0 fail
26 boots: 26 pass, 0 fail
59 tests: 59 pass, 0 failLinux version: 5.4.132-rc1-ge00f43b5589c
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04Jon
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.132 release. There are 348 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jul 2021 06:02:46 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.132-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
Regressions found on powerpc:
- build/gcc-10-cell_defconfig
- build/gcc-8-defconfig
- build/gcc-10-defconfig
- build/gcc-9-defconfig
- build/gcc-9-maple_defconfig
- build/gcc-8-maple_defconfig
- build/gcc-8-cell_defconfig
- build/gcc-10-maple_defconfig
- build/gcc-9-cell_defconfig
The following patch caused build warnings / errors on powerpc.
Quoted 2 lines
Michael Ellerman <[email protected]>
powerpc/stacktrace: Fix spurious "stale" traces inraise_backtrace_ipi()
Build error:
------------arch/powerpc/kernel/stacktrace.c: In function 'raise_backtrace_ipi':arch/powerpc/kernel/stacktrace.c:248:5: error: implicit declaration of function 'udelay' [-Werror=implicit-function-declaration]
248 | udelay(1);
| ^~~~~~cc1: all warnings being treated as errors
steps to reproduce:
-------------------------
# TuxMake is a command line tool and Python library that provides
# portable and repeatable Linux kernel builds across a variety of # architectures, toolchains, kernel configurations, and make targets. # # TuxMake supports the concept of runtimes. # See https://docs.tuxmake.org/runtimes/, for that to work it requires # that you install podman or docker on your system. # # To install tuxmake on your system globally: # sudo pip3 install -U tuxmake # # See https://docs.tuxmake.org/ for complete documentation.
tuxmake --runtime podman --target-arch powerpc --toolchain gcc-10 --kconfig defconfig
build log link,
https://builds.tuxbuild.com/1vChzZyzmKmQCN2cLMtRBR5kbdI/
--
Linaro LKFT
https://lkft.linaro.org
Greg Kroah-Hartman
maintainerQuoted 68 lines · Naresh Kamboju
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.132 release. There are 348 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jul 2021 06:02:46 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.132-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
Regressions found on powerpc:
- build/gcc-10-cell_defconfig
- build/gcc-8-defconfig
- build/gcc-10-defconfig
- build/gcc-9-defconfig
- build/gcc-9-maple_defconfig
- build/gcc-8-maple_defconfig
- build/gcc-8-cell_defconfig
- build/gcc-10-maple_defconfig
- build/gcc-9-cell_defconfigThe following patch caused build warnings / errors on powerpc.
Quoted 2 lines
Michael Ellerman <[email protected]>
powerpc/stacktrace: Fix spurious "stale" traces inraise_backtrace_ipi()Build error:
------------arch/powerpc/kernel/stacktrace.c: In function 'raise_backtrace_ipi':arch/powerpc/kernel/stacktrace.c:248:5: error: implicit declaration of function 'udelay' [-Werror=implicit-function-declaration]248 | udelay(1); | ^~~~~~cc1: all warnings being treated as errors
steps to reproduce:
-------------------------
# TuxMake is a command line tool and Python library that provides# portable and repeatable Linux kernel builds across a variety of # architectures, toolchains, kernel configurations, and make targets. # # TuxMake supports the concept of runtimes. # See https://docs.tuxmake.org/runtimes/, for that to work it requires # that you install podman or docker on your system. # # To install tuxmake on your system globally: # sudo pip3 install -U tuxmake # # See https://docs.tuxmake.org/ for complete documentation.
Quoted 6 lines
tuxmake --runtime podman --target-arch powerpc --toolchain gcc-10 --kconfig defconfig
build log link,
https://builds.tuxbuild.com/1vChzZyzmKmQCN2cLMtRBR5kbdI/
Pushed out a -rc2.
thanks,
greg k-h
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.132 release. There are 348 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jul 2021 06:02:46 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.132-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.4:
10 builds: 10 pass, 0 fail
26 boots: 26 pass, 0 fail
59 tests: 59 pass, 0 failLinux version: 5.4.132-rc1-ge00f43b5589c
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04Jon
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.132 release. There are 348 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jul 2021 06:02:46 +0000. Anything received after that time might be too late.
Build results:
total: 157 pass: 153 fail: 4
Failed builds:
powerpc:defconfig
powerpc:allmodconfig
powerpc:cell_defconfig
powerpc:maple_defconfig
Qemu test results:
total: 428 pass: 404 fail: 24
Failed tests:
<almost all ppc64 tests>
Error log:arch/powerpc/kernel/stacktrace.c: In function 'raise_backtrace_ipi':arch/powerpc/kernel/stacktrace.c:248:33: error: implicit declaration of function 'udelay'
Guenter
Greg Kroah-Hartman
maintainerQuoted 18 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.132 release. There are 348 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jul 2021 06:02:46 +0000. Anything received after that time might be too late.
Build results:
total: 157 pass: 153 fail: 4Failed builds:
powerpc:defconfig
powerpc:allmodconfig
powerpc:cell_defconfig
powerpc:maple_defconfig
Qemu test results:
Quoted 7 lines
total: 428 pass: 404 fail: 24Failed tests:
<almost all ppc64 tests>Error log:
arch/powerpc/kernel/stacktrace.c: In function 'raise_backtrace_ipi':arch/powerpc/kernel/stacktrace.c:248:33: error: implicit declaration of function 'udelay'
Pushed out a -rc2 that should hopefully fix this.
thanks,
greg k-h
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.132 release. There are 348 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jul 2021 06:02:46 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.132-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:
Signature · 1 line
Florian