Skip to contentSkip to conversation

stime: Only o32 system calls require 32-bit programs on mips

PATCH New zhanglianjie 2 participants 5 messages Jul 20, 2021 – Jul 21, 2021

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 stime: Only o32 system calls require 32-bit programs on mips

The stime() system call is only o32, not n32 and n64. If you do not specify that the current program is compiled to 32-bit when compiling the program on mips, the stime() system call will fail when the program is running.

---
 testcases/kernel/syscalls/stime/stime_var.h | 4 ++++
 1 file changed, 4 insertions(+)
testcases/kernel/syscalls/stime/stime_var.h +4 -0
index 708b80573..c5bafac99 100644
@@ -25,7 +25,11 @@ static int do_stime(time_t *ntime)
 #endif
 	break;
 	case 1:
+#if defined(__mips__) && _MIPS_SZLONG == 32
 		return tst_syscall(__NR_stime, ntime);
+#else
+		tst_brk(TCONF, "the stime() syscall only o32 ABI in mips, make sure the current program is 32-bit");
+#endif
 	case 2: {
 		struct __kernel_old_timeval tv;
 

--
2.20.1

#1 lore raw

PATCH 1/1 stime: Only o32 system calls require 32-bit programs on mips

Hi zhanglianjie,

Quoted 4 lines

The stime() system call is only o32, not n32 and n64. If you do not specify that the current program is compiled to 32-bit when compiling the program on mips, the stime() system call will fail when the program is running.

You're right that stime() is only on o32. But tst_syscall() should catch that. Or does it set different errno than ENOSYS?

Kind regards,
Petr

...

Quoted 5 lines
testcases/kernel/syscalls/stime/stime_var.h +4 -0
+#if defined(__mips__) && _MIPS_SZLONG == 32
 		return tst_syscall(__NR_stime, ntime);
+#else
+		tst_brk(TCONF, "the stime() syscall only o32 ABI in mips, make sure the current program is 32-bit");
+#endif
#2 lore raw

PATCH 1/1 stime: Only o32 system calls require 32-bit programs on mips

Quoted 8 lines · Petr Vorel

Hi zhanglianjie,

Quoted 4 lines

The stime() system call is only o32, not n32 and n64. If you do not specify that the current program is compiled to 32-bit when compiling the program on mips, the stime() system call will fail when the program is running.

You're right that stime() is only on o32. But tst_syscall() should catch that. Or does it set different errno than ENOSYS?

The returned errno is EFAULT. The o32 system call of stime is implemented on mips, so ENOSYS will not be returned.

COMPAT_SYSCALL_DEFINE1(stime, compat_time_t __user *, tptr)

{
     ...
     if (get_user(tv.tv_sec, tptr))
         return -EFAULT;
     ...
}

The tptr address is in the user space 0x120010da0, and after the system call, it is 0x20010da0 in the kernel state, and the upper 32 bits are set to 0, resulting in a failure to copy data from the user space to the kernel space.

This patch needs to be modified and cannot affect other architectures.

Quoted 8 lines

...

Quoted 5 lines
testcases/kernel/syscalls/stime/stime_var.h +4 -0
+#if defined(__mips__) && _MIPS_SZLONG == 32
  		return tst_syscall(__NR_stime, ntime);
+#else
+		tst_brk(TCONF, "the stime() syscall only o32 ABI in mips, make sure the current program is 32-bit");
+#endif
Signature · 2 lines
Regards,
Zhang Lianjie
#3 lore raw

PATCH 1/1 stime: Only o32 system calls require 32-bit programs on mips

Hi zhanglianjie,

[ Cc Thomas Bogendoerfer, MIPS kernel maintainer ]

Quoted 7 lines · Petr Vorel
Quoted 6 lines

Hi zhanglianjie,

Quoted 4 lines

The stime() system call is only o32, not n32 and n64. If you do not specify that the current program is compiled to 32-bit when compiling the program on mips, the stime() system call will fail when the program is running.

Quoted 5 lines
Quoted 2 lines

You're right that stime() is only on o32. But tst_syscall() should catch that. Or does it set different errno than ENOSYS?

The returned errno is EFAULT. The o32 system call of stime is implemented on mips, so ENOSYS will not be returned.

I see.

Quoted 8 lines

COMPAT_SYSCALL_DEFINE1(stime, compat_time_t __user *, tptr)

{
    ...
    if (get_user(tv.tv_sec, tptr))
        return -EFAULT;
    ...
}
Quoted 4 lines

The tptr address is in the user space 0x120010da0, and after the system call, it is 0x20010da0 in the kernel state, and the upper 32 bits are set to 0, resulting in a failure to copy data from the user space to the kernel space.

Thanks for explanation.

Quoted 1 line

This patch needs to be modified and cannot affect other architectures.

Yes, o2 has to fixed, but agree that this would affect other archs which
supports __NR_stime, i.e. i386 now also complains:
stime_var.h:31: TCONF: the stime() syscall only o32 ABI in mips, make sure the current program is 32-bit

but it should stay:
stime02.c:37: TPASS: stime(2) fails, Caller not root: EPERM (1)

Quoted 2 lines
Quoted 2 lines

...

Quoted 1 line

+#if defined(__mips__) && _MIPS_SZLONG == 32

Not sure if this would work to whitelist only mips n32 and n64 (keep mips o32 and all other archs):
#if ! defined(_MIPS_SZLONG) || _MIPS_SZLONG == 32

Kind regards,
Petr

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
  		return tst_syscall(__NR_stime, ntime);
testcases/kernel/syscalls/stime/stime_var.h +3 -0
+#else
+		tst_brk(TCONF, "the stime() syscall only o32 ABI in mips, make sure the current program is 32-bit");
+#endif
#4 lore raw

PATCH 1/1 stime: Only o32 system calls require 32-bit programs on mips

Quoted 32 lines · Petr Vorel

Hi zhanglianjie,

[ Cc Thomas Bogendoerfer, MIPS kernel maintainer ]

Quoted 7 lines · Petr Vorel
Quoted 6 lines

Hi zhanglianjie,

Quoted 4 lines

The stime() system call is only o32, not n32 and n64. If you do not specify that the current program is compiled to 32-bit when compiling the program on mips, the stime() system call will fail when the program is running.

Quoted 5 lines
Quoted 2 lines

You're right that stime() is only on o32. But tst_syscall() should catch that. Or does it set different errno than ENOSYS?

The returned errno is EFAULT. The o32 system call of stime is implemented on mips, so ENOSYS will not be returned.

I see.

Quoted 8 lines

COMPAT_SYSCALL_DEFINE1(stime, compat_time_t __user *, tptr)

{
     ...
     if (get_user(tv.tv_sec, tptr))
         return -EFAULT;
     ...
}
Quoted 4 lines

The tptr address is in the user space 0x120010da0, and after the system call, it is 0x20010da0 in the kernel state, and the upper 32 bits are set to 0, resulting in a failure to copy data from the user space to the kernel space.

Thanks for explanation.

Quoted 8 lines
Quoted 1 line

This patch needs to be modified and cannot affect other architectures.

Yes, o2 has to fixed, but agree that this would affect other archs which
supports __NR_stime, i.e. i386 now also complains:
stime_var.h:31: TCONF: the stime() syscall only o32 ABI in mips, make sure the current program is 32-bit

but it should stay:
stime02.c:37: TPASS: stime(2) fails, Caller not root: EPERM (1)

Thanks for the code review.
If it only affects the mips architecture and does not affect other architectures, does it need to be modified here?

Quoted 6 lines
Quoted 2 lines
Quoted 2 lines

...

Quoted 1 line

+#if defined(__mips__) && _MIPS_SZLONG == 32

Not sure if this would work to whitelist only mips n32 and n64 (keep mips o32 and all other archs):
#if ! defined(_MIPS_SZLONG) || _MIPS_SZLONG == 32

It can be determined that only mips n32 and n64 need to be whitelisted, and calling stime() on other 64-bit architectures will return ENOSYS.

In the following compilation conditions, _ABIO32, _ABI64, and _ABIN32 have been defined:

grep -E 'ifdef|if defined' ~/ltp/include/lapi/syscalls.h #ifdef __aarch64__
#ifdef __arc__
#ifdef __arm__
#ifdef __hppa__
#ifdef __i386__
#ifdef __ia64__
#if defined(__mips__) && defined(_ABIN32)
#if defined(__mips__) && defined(_ABI64)
#if defined(__mips__) && defined(_ABIO32) #ifdef __powerpc64__
#ifdef __powerpc__
#ifdef __s390x__
#if defined(__s390__) && !defined(__s390x__) #ifdef __sh__
#if defined(__sparc__) && defined(__arch64__) #if defined(__sparc__) && !defined(__arch64__) #ifdef __x86_64__

Modified patch v2:
https://patchwork.ozlabs.org/project/ltp/patch/[email protected]/

Quoted 6 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
   		return tst_syscall(__NR_stime, ntime);
testcases/kernel/syscalls/stime/stime_var.h +3 -0
+#else
+		tst_brk(TCONF, "the stime() syscall only o32 ABI in mips, make sure the current program is 32-bit");
+#endif
Signature · 2 lines
Regards,
Zhang Lianjie