Skip to contentSkip to conversation

perf beauty: Reuse the generic switch.

PATCH Applied Ian Rogers 2 participants 4 messages May 13, 2021 – Jul 27, 2021 perf events

lore
Share & tools
lore

Ian Rogers

author reviewer
#0 lore raw

PATCH 1/1 perf beauty: Reuse the generic switch.

Previously the code would see if, for example, tools/perf/arch/arm/include/uapi/asm/errno.h exists and if not generate a "generic" switch statement using the asm-generic/errno.h. This creates multiple identical "generic" switch statements before the default generic switch statement for an unknown architecture. By simplifying the archlist to be only for architectures that are not "generic" the amount of generated code can be reduced from 14 down to 6 functions.

Remove the special case of x86, instead reverse the architecture names so that it comes first.

---
 tools/perf/trace/beauty/arch_errno_names.sh | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
tools/perf/trace/beauty/arch_errno_names.sh +5 -6
index 9f9ea45cddc4..2c5f72fa8108 100755
@@ -87,14 +87,13 @@ cat <<EoHEADER
 
 EoHEADER
 
-# Create list of architectures and ignore those that do not appear
-# in tools/perf/arch
+# Create list of architectures that have a specific errno.h.
 archlist=""
-for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | grep -v x86 | sort); do
-	test -d $toolsdir/perf/arch/$arch && archlist="$archlist $arch"
+for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | sort -r); do
+	test -f $toolsdir/arch/$arch/include/uapi/asm/errno.h && archlist="$archlist $arch"
 done
 
-for arch in x86 $archlist generic; do
+for arch in generic $archlist; do
 	process_arch "$arch"
 done
-create_arch_errno_table_func "x86 $archlist" "generic"
+create_arch_errno_table_func "$archlist" "generic"
Signature · 1 line
2.31.1.751.gd2f1c929bd-goog
author reviewer
#1 lore raw
Quoted 9 lines · Ian Rogers

Previously the code would see if, for example, tools/perf/arch/arm/include/uapi/asm/errno.h exists and if not generate a "generic" switch statement using the asm-generic/errno.h. This creates multiple identical "generic" switch statements before the default generic switch statement for an unknown architecture. By simplifying the archlist to be only for architectures that are not "generic" the amount of generated code can be reduced from 14 down to 6 functions.

Quoted 4 lines

Remove the special case of x86, instead reverse the architecture names so that it comes first.

Ping.

Thanks!
Ian

Quoted 31 lines
---
 tools/perf/trace/beauty/arch_errno_names.sh | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
tools/perf/trace/beauty/arch_errno_names.sh +5 -7
index 9f9ea45cddc4..2c5f72fa8108 100755
@@ -87,14 +87,13 @@ cat <<EoHEADER
 
 EoHEADER
 
-# Create list of architectures and ignore those that do not appear
-# in tools/perf/arch
+# Create list of architectures that have a specific errno.h.
 archlist=""
-for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | grep -v x86 | sort); do
-       test -d $toolsdir/perf/arch/$arch && archlist="$archlist $arch"
+for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | sort -r); do
+       test -f $toolsdir/arch/$arch/include/uapi/asm/errno.h && archlist="$archlist $arch"
 done
 
-for arch in x86 $archlist generic; do
+for arch in generic $archlist; do
        process_arch "$arch"
 done
-create_arch_errno_table_func "x86 $archlist" "generic"
+create_arch_errno_table_func "$archlist" "generic"
--

2.31.1.751.gd2f1c929bd-goog

author reviewer
#2 lore raw
Quoted 14 lines · Ian Rogers
Quoted 12 lines · Ian Rogers

Previously the code would see if, for example, tools/perf/arch/arm/include/uapi/asm/errno.h exists and if not generate a "generic" switch statement using the asm-generic/errno.h. This creates multiple identical "generic" switch statements before the default generic switch statement for an unknown architecture. By simplifying the archlist to be only for architectures that are not "generic" the amount of generated code can be reduced from 14 down to 6 functions.

Remove the special case of x86, instead reverse the architecture names so that it comes first.

Quoted 6 lines
Quoted 1 line

Ping.

Thanks!
Ian

Ping,

Thanks!
Ian

Quoted 31 lines
Quoted 31 lines
---
 tools/perf/trace/beauty/arch_errno_names.sh | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
tools/perf/trace/beauty/arch_errno_names.sh +5 -7
index 9f9ea45cddc4..2c5f72fa8108 100755
@@ -87,14 +87,13 @@ cat <<EoHEADER
 
 EoHEADER
 
-# Create list of architectures and ignore those that do not appear
-# in tools/perf/arch
+# Create list of architectures that have a specific errno.h.
 archlist=""
-for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | grep -v x86 | sort); do
-       test -d $toolsdir/perf/arch/$arch && archlist="$archlist $arch"
+for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | sort -r); do
+       test -f $toolsdir/arch/$arch/include/uapi/asm/errno.h && archlist="$archlist $arch"
 done
 
-for arch in x86 $archlist generic; do
+for arch in generic $archlist; do
        process_arch "$arch"
 done
-create_arch_errno_table_func "x86 $archlist" "generic"
+create_arch_errno_table_func "$archlist" "generic"
--

2.31.1.751.gd2f1c929bd-goog

maintainer Tested-by on v1 1/1 Applied
#3 lore raw
In reply to Ian Rogers

Em Wed, May 12, 2021 at 11:04:41PM -0700, Ian Rogers escreveu:

Quoted 2 lines

Previously the code would see if, for example, tools/perf/arch/arm/include/uapi/asm/errno.h exists and if not generate

If tools/arch/arm/include/uapi/asm/errno.h exists, drop that 'perf/' after 'tools/':

⬢[acme@toolbox perf]$ ls -la tools/arch/*/include/uapi/asm/errno.h -rw-r--r--. 1 acme acme 5434 Jul 15 16:17 tools/arch/alpha/include/uapi/asm/errno.h -rw-r--r--. 1 acme acme 5792 Jul 15 16:17 tools/arch/mips/include/uapi/asm/errno.h -rw-r--r--. 1 acme acme 5764 Jul 15 16:17 tools/arch/parisc/include/uapi/asm/errno.h -rw-r--r--. 1 acme acme 278 Jul 15 16:17 tools/arch/powerpc/include/uapi/asm/errno.h -rw-r--r--. 1 acme acme 5539 Jul 15 16:17 tools/arch/sparc/include/uapi/asm/errno.h
-rw-r--r--. 1 acme acme 31 Jul 15 16:17 tools/arch/x86/include/uapi/asm/errno.h
⬢[acme@toolbox perf]$

I added the steps needed to translate your description to verify everything and added as committer notes.

Thanks, applied as:

commit b22cc9a6701143fb1fee397e0c2088ee0473340a

Author: Ian Rogers <[email protected]>
Date:   Wed May 12 23:04:41 2021 -0700

perf beauty: Reuse the generic arch errno switch

Previously the code would see if, for example, tools/perf/arch/arm/include/uapi/asm/errno.h exists and if not generate a "generic" switch statement using the asm-generic/errno.h.

This creates multiple identical "generic" switch statements before the default generic switch statement for an unknown architecture.

By simplifying the archlist to be only for architectures that are not "generic" the amount of generated code can be reduced from 14 down to 6 functions.

Remove the special case of x86, instead reverse the architecture names so that it comes first.

Committer testing:

$ tools/perf/trace/beauty/arch_errno_names.sh gcc tools > before

Apply this patch and:

$ tools/perf/trace/beauty/arch_errno_names.sh gcc tools > after

14 arches down to 6, that are the ones with an explicit errno.h file:

$ ls -1 tools/arch/*/include/uapi/asm/errno.h tools/arch/alpha/include/uapi/asm/errno.h tools/arch/mips/include/uapi/asm/errno.h tools/arch/parisc/include/uapi/asm/errno.h tools/arch/powerpc/include/uapi/asm/errno.h tools/arch/sparc/include/uapi/asm/errno.h tools/arch/x86/include/uapi/asm/errno.h $

$ diff -u4 before after
@@ -2099,32 +987,16 @@
const char *arch_syscalls__strerrno(const char *arch, int err) {
if (!strcmp(arch, "x86"))
return errno_to_name__x86(err);
- if (!strcmp(arch, "alpha"))
- return errno_to_name__alpha(err);
- if (!strcmp(arch, "arc"))
- return errno_to_name__arc(err);
- if (!strcmp(arch, "arm"))
- return errno_to_name__arm(err);
- if (!strcmp(arch, "arm64"))
- return errno_to_name__arm64(err);
- if (!strcmp(arch, "csky"))
- return errno_to_name__csky(err);
- if (!strcmp(arch, "mips"))
- return errno_to_name__mips(err);
- if (!strcmp(arch, "parisc"))
- return errno_to_name__parisc(err);
- if (!strcmp(arch, "powerpc"))
- return errno_to_name__powerpc(err);
- if (!strcmp(arch, "riscv"))
- return errno_to_name__riscv(err);
- if (!strcmp(arch, "s390"))
- return errno_to_name__s390(err);
- if (!strcmp(arch, "sh"))
- return errno_to_name__sh(err);
if (!strcmp(arch, "sparc"))
return errno_to_name__sparc(err);
- if (!strcmp(arch, "xtensa"))
- return errno_to_name__xtensa(err);
+ if (!strcmp(arch, "powerpc"))
+ return errno_to_name__powerpc(err);
+ if (!strcmp(arch, "parisc"))
+ return errno_to_name__parisc(err);
+ if (!strcmp(arch, "mips"))
+ return errno_to_name__mips(err);
+ if (!strcmp(arch, "alpha"))
+ return errno_to_name__alpha(err);
return errno_to_name__generic(err);
}

The rest of the patch is the removal of the errno_to_name__generic() unneeded clones.

tools/perf/trace/beauty/arch_errno_names.sh +5 -6
index 9f9ea45cddc4384c..2c5f72fa81087956 100755
@@ -87,14 +87,13 @@ cat <<EoHEADER
 
 EoHEADER
 
-# Create list of architectures and ignore those that do not appear
-# in tools/perf/arch
+# Create list of architectures that have a specific errno.h.
 archlist=""
-for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | grep -v x86 | sort); do
-	test -d $toolsdir/perf/arch/$arch && archlist="$archlist $arch"
+for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | sort -r); do
+	test -f $toolsdir/arch/$arch/include/uapi/asm/errno.h && archlist="$archlist $arch"
 done
 
-for arch in x86 $archlist generic; do
+for arch in generic $archlist; do
 	process_arch "$arch"
 done
-create_arch_errno_table_func "x86 $archlist" "generic"
+create_arch_errno_table_func "$archlist" "generic"