Skip to contentSkip to conversation

qedr: consider dscp prio for vlan tag and update tos

PATCH Superseded Shai Malin 2 participants 5 messages Jul 29, 2021

Subsystems (4)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Shai Malin

author
#0 lore raw

cover qedr: consider dscp prio for vlan tag and update tos

From: Prabhakar Kushwaha <[email protected]>

Add functions to check get/set dscp priority in qed and these functions are further used in deciding vlan priority based on dscp state.

Also update RDMA CM TOS.

Prabhakar Kushwaha (3):
qed: add get and set support for dscp priority
qedr: Consider dscp priority for vlan priority
qedr: Use grh layer traffic_class as RDMA CM TOS

 drivers/infiniband/hw/qedr/qedr_roce_cm.c  | 13 +++-
 drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 72 ++++++++++++++++++++++
 drivers/net/ethernet/qlogic/qed/qed_dcbx.h | 10 +++
 drivers/net/ethernet/qlogic/qed/qed_rdma.c | 26 ++++++++
 include/linux/qed/qed_if.h                 |  6 ++
 include/linux/qed/qed_rdma_if.h            |  7 +++
 6 files changed, 132 insertions(+), 2 deletions(-)
Signature · 1 line
2.24.1
author
#1 lore raw

PATCH 1/3 qed: add get and set support for dscp priority

From: Prabhakar Kushwaha <[email protected]>

This patch add support of get or set priority value for a given dscp index.

---
 drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 65 ++++++++++++++++++++++
 drivers/net/ethernet/qlogic/qed/qed_dcbx.h |  9 +++
 include/linux/qed/qed_if.h                 |  6 ++
 3 files changed, 80 insertions(+)
drivers/net/ethernet/qlogic/qed/qed_dcbx.c +65 -0
index e81dd34a3cac..ba9276599e72 100644
@@ -1280,6 +1280,71 @@ int qed_dcbx_get_config_params(struct qed_hwfn *p_hwfn,
 	return 0;
 }
 
+int qed_dcbx_get_dscp_priority(struct qed_hwfn *p_hwfn, u8 dscp_index,
+			       u8 *p_dscp_pri)
+{
+	struct qed_dcbx_get *p_dcbx_info;
+	int rc;
+
+	if (IS_VF(p_hwfn->cdev)) {
+		DP_ERR(p_hwfn->cdev,
+		       "qed rdma get dscp priority not supported for VF.\n");
+		return -EINVAL;
+	}
+
+	if (dscp_index >= QED_DCBX_DSCP_SIZE) {
+		DP_ERR(p_hwfn, "Invalid dscp index %d\n", dscp_index);
+		return -EINVAL;
+	}
+
+	p_dcbx_info = kmalloc(sizeof(*p_dcbx_info), GFP_KERNEL);
+	if (!p_dcbx_info)
+		return -ENOMEM;
+
+	memset(p_dcbx_info, 0, sizeof(*p_dcbx_info));
+	rc = qed_dcbx_query_params(p_hwfn, p_dcbx_info,
+				   QED_DCBX_OPERATIONAL_MIB);
+	if (rc) {
+		kfree(p_dcbx_info);
+		return rc;
+	}
+
+	*p_dscp_pri = p_dcbx_info->dscp.dscp_pri_map[dscp_index];
+	kfree(p_dcbx_info);
+
+	return 0;
+}
+
+int qed_dcbx_set_dscp_priority(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			       u8 dscp_index, u8 pri_val)
+{
+	struct qed_dcbx_set dcbx_set;
+	int rc;
+
+	if (IS_VF(p_hwfn->cdev)) {
+		DP_ERR(p_hwfn->cdev,
+		       "qed rdma set dscp priority not supported for VF.\n");
+		return -EINVAL;
+	}
+
+	if (dscp_index >= QED_DCBX_DSCP_SIZE ||
+	    pri_val >= QED_MAX_PFC_PRIORITIES) {
+		DP_ERR(p_hwfn, "Invalid dscp params: index = %d pri = %d\n",
+		       dscp_index, pri_val);
+		return -EINVAL;
+	}
+
+	memset(&dcbx_set, 0, sizeof(dcbx_set));
+	rc = qed_dcbx_get_config_params(p_hwfn, &dcbx_set);
+	if (rc)
+		return rc;
+
+	dcbx_set.override_flags = QED_DCBX_OVERRIDE_DSCP_CFG;
+	dcbx_set.dscp.dscp_pri_map[dscp_index] = pri_val;
+
+	return qed_dcbx_config_params(p_hwfn, p_ptt, &dcbx_set, 1);
+}
+
 static struct qed_dcbx_get *qed_dcbnl_get_dcbx(struct qed_hwfn *hwfn,
 					       enum qed_mib_read_type type)
 {
drivers/net/ethernet/qlogic/qed/qed_dcbx.h +9 -0
index e1798925b444..6d8ce9bb30bd 100644
@@ -46,6 +46,7 @@ struct qed_dcbx_set {
 	bool enabled;
 	struct qed_dcbx_admin_params config;
 	u32 ver_num;
+	struct qed_dcbx_dscp_params dscp;
 };
 
 struct qed_dcbx_results {
@@ -100,6 +101,14 @@ void qed_dcbx_info_free(struct qed_hwfn *p_hwfn);
 void qed_dcbx_set_pf_update_params(struct qed_dcbx_results *p_src,
 				   struct pf_update_ramrod_data *p_dest);
 
+/* Returns priority value for a given dscp index */
+int qed_dcbx_get_dscp_priority(struct qed_hwfn *p_hwfn, u8 dscp_index,
+			       u8 *p_dscp_pri);
+
+/* Sets priority value for a given dscp index */
+int qed_dcbx_set_dscp_priority(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+			       u8 dscp_index, u8 pri_val);
+
 #define QED_DCBX_DEFAULT_TC	0
 
 u8 qed_dcbx_get_priority_tc(struct qed_hwfn *p_hwfn, u8 pri);
include/linux/qed/qed_if.h +6 -0
index 850b98991670..f7ce9a923d7c 100644
@@ -124,12 +124,18 @@ struct qed_dcbx_operational_params {
 	u32 err;
 };
 
+struct qed_dcbx_dscp_params {
+	bool enabled;
+	u8 dscp_pri_map[QED_DCBX_DSCP_SIZE];
+};
+
 struct qed_dcbx_get {
 	struct qed_dcbx_operational_params operational;
 	struct qed_dcbx_lldp_remote lldp_remote;
 	struct qed_dcbx_lldp_local lldp_local;
 	struct qed_dcbx_remote_params remote;
 	struct qed_dcbx_admin_params local;
+	struct qed_dcbx_dscp_params dscp;
 };
 
 enum qed_nvm_images {
Signature · 1 line
2.24.1
#2 lore raw

Re: [PATCH for-next 1/3] qed: add get and set support for dscp priority

Quoted 21 lines · Shai Malin

From: Prabhakar Kushwaha <[email protected]>

This patch add support of get or set priority value for a given dscp index.

---
 drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 65 ++++++++++++++++++++++
 drivers/net/ethernet/qlogic/qed/qed_dcbx.h |  9 +++
 include/linux/qed/qed_if.h                 |  6 ++
 3 files changed, 80 insertions(+)
drivers/net/ethernet/qlogic/qed/qed_dcbx.c +0 -0
index e81dd34a3cac..ba9276599e72 100644
@@ -1280,6 +1280,71 @@ int qed_dcbx_get_config_params(struct qed_hwfn *p_hwfn,
 	return 0;
 }

<...>

drivers/net/ethernet/qlogic/qed/qed_dcbx.c int qed_dcbx_get_config_params(struct qed_hwfn *p_hwfn, · line 1304

Quoted 5 lines
drivers/net/ethernet/qlogic/qed/qed_dcbx.c +5 -0
+	p_dcbx_info = kmalloc(sizeof(*p_dcbx_info), GFP_KERNEL);
+	if (!p_dcbx_info)
+		return -ENOMEM;
+
+	memset(p_dcbx_info, 0, sizeof(*p_dcbx_info));

This is open-coded kzalloc().

Thanks

author
#3 lore raw

PATCH 2/3 qedr: Consider dscp priority for vlan priority

In reply to Shai Malin

From: Prabhakar Kushwaha <[email protected]>

if dscp is enabled, consider its priority while deciding vlan priority.

---
 drivers/infiniband/hw/qedr/qedr_roce_cm.c  | 11 +++++++++-
 drivers/net/ethernet/qlogic/qed/qed_dcbx.c |  7 ++++++
 drivers/net/ethernet/qlogic/qed/qed_dcbx.h |  5 +++--
 drivers/net/ethernet/qlogic/qed/qed_rdma.c | 25 ++++++++++++++++++++++
 include/linux/qed/qed_rdma_if.h            |  7 ++++++
 5 files changed, 52 insertions(+), 3 deletions(-)
drivers/infiniband/hw/qedr/qedr_roce_cm.c +10 -1
index 13e5e6bbec99..eb7d24742664 100644
@@ -389,6 +389,7 @@ static inline int qedr_gsi_build_header(struct qedr_dev *dev,
 	const struct ib_global_route *grh = rdma_ah_read_grh(ah_attr);
 	const struct ib_gid_attr *sgid_attr = grh->sgid_attr;
 	int send_size = 0;
+	u8 vlan_pri, dscp;
 	u16 vlan_id = 0;
 	u16 ether_type;
 	int rc;
@@ -437,8 +438,16 @@ static inline int qedr_gsi_build_header(struct qedr_dev *dev,
 	ether_addr_copy(udh->eth.dmac_h, ah_attr->roce.dmac);
 	ether_addr_copy(udh->eth.smac_h, dev->ndev->dev_addr);
 	if (has_vlan) {
-		udh->eth.type = htons(ETH_P_8021Q);
+		dscp = GET_FIELD(grh->traffic_class, QED_RDMA_TC_TOS_DSCP);
+
+		/* get the vlan priority associated with the dscp value */
+		if (!dev->ops->rdma_get_dscp_priority(dev->rdma_ctx, dscp,
+						      &vlan_pri))
+			vlan_id |= vlan_pri << VLAN_PRIO_SHIFT;
+
 		udh->vlan.tag = htons(vlan_id);
+
+		udh->eth.type = htons(ETH_P_8021Q);
 		udh->vlan.type = htons(ether_type);
 	} else {
 		udh->eth.type = htons(ether_type);
drivers/net/ethernet/qlogic/qed/qed_dcbx.c +7 -0
index ba9276599e72..cec4b890e69a 100644
@@ -973,6 +973,13 @@ void qed_dcbx_set_pf_update_params(struct qed_dcbx_results *p_src,
 	qed_dcbx_update_protocol_data(p_dcb_data, p_src, DCBX_PROTOCOL_ETH);
 }
 
+bool qed_dcbx_get_dscp_state(struct qed_hwfn *p_hwfn)
+{
+	struct qed_dcbx_get *p_dcbx_info = &p_hwfn->p_dcbx_info->get;
+
+	return p_dcbx_info->dscp.enabled;
+}
+
 u8 qed_dcbx_get_priority_tc(struct qed_hwfn *p_hwfn, u8 pri)
 {
 	struct qed_dcbx_get *dcbx_info = &p_hwfn->p_dcbx_info->get;
drivers/net/ethernet/qlogic/qed/qed_dcbx.h +3 -2
index 6d8ce9bb30bd..86a374c3ed86 100644
@@ -102,8 +102,7 @@ void qed_dcbx_set_pf_update_params(struct qed_dcbx_results *p_src,
 				   struct pf_update_ramrod_data *p_dest);
 
 /* Returns priority value for a given dscp index */
-int qed_dcbx_get_dscp_priority(struct qed_hwfn *p_hwfn, u8 dscp_index,
-			       u8 *p_dscp_pri);
+int qed_dcbx_get_dscp_priority(struct qed_hwfn *p_hwfn, u8 dscp_index, u8 *pri);
 
 /* Sets priority value for a given dscp index */
 int qed_dcbx_set_dscp_priority(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
@@ -112,4 +111,6 @@ int qed_dcbx_set_dscp_priority(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
 #define QED_DCBX_DEFAULT_TC	0
 
 u8 qed_dcbx_get_priority_tc(struct qed_hwfn *p_hwfn, u8 pri);
+
+bool qed_dcbx_get_dscp_state(struct qed_hwfn *p_hwfn);
 #endif
drivers/net/ethernet/qlogic/qed/qed_rdma.c +25 -0
index da864d12916b..e904ba2e6242 100644
@@ -32,6 +32,7 @@
 #include "qed_rdma.h"
 #include "qed_roce.h"
 #include "qed_sp.h"
+#include "qed_dcbx.h"
 
 
 int qed_rdma_bmap_alloc(struct qed_hwfn *p_hwfn,
@@ -1965,6 +1966,29 @@ static void qed_rdma_remove_user(void *rdma_cxt, u16 dpi)
 	spin_unlock_bh(&p_hwfn->p_rdma_info->lock);
 }
 
+#ifdef CONFIG_DCB
+static int qed_rdma_get_dscp_priority(void *rdma_cxt, u8 dscp_index, u8 *pri)
+{
+	struct qed_hwfn *p_hwfn = (struct qed_hwfn *)rdma_cxt;
+	int rc = -EINVAL;
+
+	if (qed_dcbx_get_dscp_state(p_hwfn)) {
+		rc = qed_dcbx_get_dscp_priority(p_hwfn, dscp_index, pri);
+		if (rc)
+			DP_INFO(p_hwfn,
+				"Failed to get priority val for dscp idx %d\n",
+				dscp_index);
+	}
+
+	return rc;
+}
+#else
+static int qed_rdma_get_dscp_priority(void *rdma_cxt, u8 dscp_index, u8 *pri)
+{
+	return -EINVAL;
+}
+#endif
+
 static int qed_roce_ll2_set_mac_filter(struct qed_dev *cdev,
 				       u8 *old_mac_address,
 				       u8 *new_mac_address)
@@ -2045,6 +2069,7 @@ static const struct qed_rdma_ops qed_rdma_ops_pass = {
 	.rdma_create_srq = &qed_rdma_create_srq,
 	.rdma_modify_srq = &qed_rdma_modify_srq,
 	.rdma_destroy_srq = &qed_rdma_destroy_srq,
+	.rdma_get_dscp_priority = &qed_rdma_get_dscp_priority,
 	.ll2_acquire_connection = &qed_ll2_acquire_connection,
 	.ll2_establish_connection = &qed_ll2_establish_connection,
 	.ll2_terminate_connection = &qed_ll2_terminate_connection,
include/linux/qed/qed_rdma_if.h +7 -0
index aeb242cefebf..cd98e95ec2e3 100644
@@ -363,6 +363,10 @@ struct qed_rdma_modify_qp_in_params {
 	u32 dest_qp;
 	bool lb_indication;
 	u16 mtu;
+#define QED_RDMA_TC_TOS_ECN_SHIFT 0
+#define QED_RDMA_TC_TOS_ECN_MASK 0x3
+#define QED_RDMA_TC_TOS_DSCP_SHIFT 2
+#define QED_RDMA_TC_TOS_DSCP_MASK 0x3f
 	u8 traffic_class_tos;
 	u8 hop_limit_ttl;
 	u32 flow_label;
@@ -639,6 +643,9 @@ struct qed_rdma_ops {
 	int (*rdma_modify_srq)(void *rdma_cxt,
 			       struct qed_rdma_modify_srq_in_params *iparams);
 
+	int (*rdma_get_dscp_priority)(void *rdma_cxt, u8 dscp_index,
+				      u8 *p_dscp_pri);
+
 	int (*ll2_acquire_connection)(void *rdma_cxt,
 				      struct qed_ll2_acquire_data *data);
 
Signature · 1 line
2.24.1
author
#4 lore raw

PATCH 3/3 qedr: Use grh layer traffic_class as RDMA CM TOS

In reply to Shai Malin

From: Prabhakar Kushwaha <[email protected]>

Instead of grh flow label use grh layer traffic_class as RDMA CM TOS.

---
 drivers/infiniband/hw/qedr/qedr_roce_cm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/qedr/qedr_roce_cm.c +1 -1
index eb7d24742664..1fa7415117e5 100644
@@ -477,7 +477,7 @@ static inline int qedr_gsi_build_header(struct qedr_dev *dev,
 		u32 ipv4_addr;
 
 		udh->ip4.protocol = IPPROTO_UDP;
-		udh->ip4.tos = htonl(grh->flow_label);
+		udh->ip4.tos = grh->traffic_class;
 		udh->ip4.frag_off = htons(IP_DF);
 		udh->ip4.ttl = grh->hop_limit;
 
Signature · 1 line
2.24.1