Skip to contentSkip to conversation

Add tst_hexdump utility

PATCH Superseded Martin Doucha 2 participants 3 messages Jul 26, 2021 – Jul 30, 2021

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 Add tst_hexdump utility

tst_hexdump implements conversion between binary and hexadecimal values in both directions for shell tests.

---
 testcases/lib/Makefile      |  2 +-
 testcases/lib/tst_hexdump.c | 55 +++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 1 deletion(-)
 create mode 100644 testcases/lib/tst_hexdump.c
testcases/lib/Makefile +1 -1
index 98d9e4613..38813e640 100644
@@ -11,6 +11,6 @@ INSTALL_TARGETS		:= *.sh
 MAKE_TARGETS		:= tst_sleep tst_random tst_checkpoint tst_rod tst_kvcmp\
 			   tst_device tst_net_iface_prefix tst_net_ip_prefix tst_net_vars\
 			   tst_getconf tst_supported_fs tst_check_drivers tst_get_unused_port\
-			   tst_get_median
+			   tst_get_median tst_hexdump
 
 include $(top_srcdir)/include/mk/generic_leaf_target.mk
testcases/lib/tst_hexdump.c new file +55 -0

55 lines not on this page · raw message

Signature · 1 line
2.32.0
#1 lore raw

PATCH 2/2 Replace the xxd utility with tst_hexdump

The xxd utility is part of Vim suite and may not be available on embedded systems. Replace it with internal LTP helper program.

---

Note: I couldn't test ima_selinux.sh changes because SLES kernel don't support measure func=CRITICAL_DATA yet. ima_keys.sh appears to work correctly.

 testcases/kernel/security/integrity/ima/tests/ima_keys.sh   | 6 +++---
 .../kernel/security/integrity/ima/tests/ima_selinux.sh      | 4 +---
 2 files changed, 4 insertions(+), 6 deletions(-)
testcases/kernel/security/integrity/ima/tests/ima_keys.sh +3 -3
index 3476b8007..995a55fed 100755
@@ -6,7 +6,7 @@
 #
 # Verify that keys are measured correctly based on policy.
 
-TST_NEEDS_CMDS="cmp cut grep sed xxd"
+TST_NEEDS_CMDS="cmp cut grep sed"
 TST_CNT=2
 TST_NEEDS_DEVICE=1
 TST_SETUP=setup
@@ -82,7 +82,7 @@ test1()
 		algorithm=$(echo "$line" | cut -d' ' -f4 | cut -d':' -f1)
 		keyring=$(echo "$line" | cut -d' ' -f5)
 
-		echo "$line" | cut -d' ' -f6 | xxd -r -p > $test_file
+		echo "$line" | cut -d' ' -f6 | tst_hexdump -d > $test_file
 
 		if ! expected_digest="$(compute_digest $algorithm $test_file)"; then
 			tst_res TCONF "cannot compute digest for $algorithm"
@@ -126,7 +126,7 @@ test2()
 		tst_brk TBROK "unable to import a certificate into $keyring_name keyring"
 
 	grep $keyring_name $ASCII_MEASUREMENTS | tail -n1 | cut -d' ' -f6 | \
-		xxd -r -p > $temp_file
+		tst_hexdump -d > $temp_file
 
 	if [ ! -s $temp_file ]; then
 		tst_res TFAIL "keyring $keyring_name not found in $ASCII_MEASUREMENTS"
testcases/kernel/security/integrity/ima/tests/ima_selinux.sh +1 -3
index c2af0e298..a4eb60b16 100755
@@ -100,8 +100,6 @@ test1()
 # configuration.
 test2()
 {
-	tst_check_cmds xxd || return
-
 	local measured_data state_file="$TST_TMPDIR/selinux_state.txt"
 	local data_source_name="selinux"
 	local pattern="data_sources=[^[:space:]]*$data_source_name"
@@ -127,7 +125,7 @@ test2()
 	digest=$(echo "$line" | cut -d' ' -f4 | cut -d':' -f2)
 	algorithm=$(echo "$line" | cut -d' ' -f4 | cut -d':' -f1)
 
-	echo "$line" | cut -d' ' -f6 | xxd -r -p > $state_file
+	echo "$line" | cut -d' ' -f6 | tst_hexdump -d > $state_file
 
 	expected_digest="$(compute_digest $algorithm $state_file)" || \
 	tst_brk TCONF "cannot compute digest for $algorithm"
Signature · 1 line
2.32.0
#2 lore raw

PATCH 1/2 Add tst_hexdump utility

In reply to Martin Doucha

Hi Martin,

Thanks! I suppose I'll merge it as is, but few notes below:

As you use only -d in this patchset I suppose you want to have
it as a general utility. It might be worth to mention that xxd by default wraps by 16 cols (-c 16), which we don't do:

$ echo "06a441375b431e06280e2d4e199ba650c14c47d9" | ./testcases/lib/tst_hexdump; echo
303661343431333735623433316530363238306532643465313939626136353063313463343764390a
$ echo "06a441375b431e06280e2d4e199ba650c14c47d9" | xxd -p
303661343431333735623433316530363238306532643465313939626136
353063313463343764390a

Other option would be just make -d as default and remove encode_hex() until is really needed.

Kind regards,
Petr

Quoted 28 lines

tst_hexdump implements conversion between binary and hexadecimal values in both directions for shell tests.

---
 testcases/lib/Makefile      |  2 +-
 testcases/lib/tst_hexdump.c | 55 +++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 1 deletion(-)
 create mode 100644 testcases/lib/tst_hexdump.c
testcases/lib/Makefile +1 -1
index 98d9e4613..38813e640 100644
@@ -11,6 +11,6 @@ INSTALL_TARGETS		:= *.sh
 MAKE_TARGETS		:= tst_sleep tst_random tst_checkpoint tst_rod tst_kvcmp\
 			   tst_device tst_net_iface_prefix tst_net_ip_prefix tst_net_vars\
 			   tst_getconf tst_supported_fs tst_check_drivers tst_get_unused_port\
-			   tst_get_median
+			   tst_get_median tst_hexdump
 
 include $(top_srcdir)/include/mk/generic_leaf_target.mk
testcases/lib/tst_hexdump.c new file +0 -0
new file mode 100644
index 000000000..f83b8bfbf

testcases/lib/tst_hexdump.c line 9

Quoted 9 lines
testcases/lib/tst_hexdump.c new file +9 -0
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 SUSE LLC <[email protected]>
+ *
+ * Convert bytes from standard input to hexadecimal representation.
+ *
+ * Parameters:
+ * -d   Convert hexadecimal values from standard input to binary representation
+ *      instead.

This could be printed in -h parameter if really meant to be a general tool. But understand you didn't bother.

Kind regards,
Petr

Quoted 46 lines
testcases/lib/tst_hexdump.c new file +46 -0
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+
+int decode_hex(void)
+{
+	int ret;
+	unsigned int val;
+
+	while ((ret = scanf("%2x", &val)) == 1)
+		putchar(val);
+
+	return ret != EOF || ferror(stdin);
+}
+
+int encode_hex(void)
+{
+	int val;
+
+	for (val = getchar(); val >= 0 && val <= 0xff; val = getchar())
+		printf("%02x", val);
+
+	return val != EOF || ferror(stdin);
+}
+
+int main(int argc, char **argv)
+{
+	int ret, decode = 0;
+
+	while ((ret = getopt(argc, argv, "d"))) {
+		if (ret < 0)
+			break;
+
+		switch (ret) {
+		case 'd':
+			decode = 1;
+			break;
+		}
+	}
+
+	if (decode)
+		return decode_hex();
+	else
+		return encode_hex();
+}