Improve automatic setup of tracking for new branches
cover Improve automatic setup of tracking for new branches
Hi,
I recently discovered some of the nicer behaviors of the --track option for local branches (courtesy of vim-fugitive's status rendering). However, after a few weeks of slowly working -t origin/master into my workflow, I figured that Git could help me out here.
This patch adds three new configuration variables to initialize the branch.<name>.* settings for tracking remote branches.
I suspect there are more tests that should be added.
Thanks,
--Ben
Ben Boeckel (1):
config: support setting up a remote tracking branch upon creation
Documentation/config/branch.txt | 15 +++++++++ branch.c | 28 ++++++++++------ branch.h | 3 ++ config.c | 15 +++++++++ environment.c | 3 ++ t/t3200-branch.sh | 57 +++++++++++++++++++++++++++++++++ 6 files changed, 111 insertions(+), 10 deletions(-)
base-commit: eb27b338a3e71c7c4079fbac8aeae3f8fbb5c687
Signature · 1 line
2.31.1
PATCH 1/1 config: support setting up a remote tracking branch upon creation
The branch.autoSetupMerge works well for setting up tracking a local branch, but there is no mechanism to automatically set up a remote tracking situation. This patch adds the following configuration values:
- branch.defaultRemote: initializes branch.<name>.remote if not
otherwise given;
- branch.defaultPushRemote: initializes branch.<name>.pushRemote (currently falls back on remote.pushDefault when pushing); and
- branch.defaultMerge: initializes branch.<name>.merge if not otherwise given.
--- Documentation/config/branch.txt | 15 +++++++++ branch.c | 28 ++++++++++------ branch.h | 3 ++ config.c | 15 +++++++++ environment.c | 3 ++ t/t3200-branch.sh | 57 +++++++++++++++++++++++++++++++++ 6 files changed, 111 insertions(+), 10 deletions(-)
Documentation/config/branch.txt +15 -0
@@ -1,3 +1,18 @@ +branch.defaultRemote:: + When a new branch is created with 'git branch', 'git switch' or 'git + checkout', this value will be used to initialize the + "branch.<name>.remote" setting. + +branch.defaultPushRemote:: + When a new branch is created with 'git branch', 'git switch' or 'git + checkout', this value will be used to initialize the + "branch.<name>.pushRemote" setting. + +branch.defaultMerge:: + When a new branch is created with 'git branch', 'git switch' or 'git + checkout', this value will be used to initialize the + "branch.<name>.merge" setting. + branch.autoSetupMerge:: Tells 'git branch', 'git switch' and 'git checkout' to set up new branches so that linkgit:git-pull[1] will appropriately merge from the
branch.c +18 -10
@@ -60,6 +60,9 @@ int install_branch_config(int flag, const char *local, const char *origin, constconst char *shortname =NULL ;struct strbuf key =STRBUF_INIT ;int rebasing =should_setup_rebase (origin); +const char *actual_origin = origin ? origin : git_branch_remote; +const char *actual_push_origin = git_branch_push_remote; +const char *actual_remote = remote ? remote : git_branch_merge;if (skip_prefix (remote,"refs/heads/" , &shortname) && !strcmp(local, shortname)
@@ -70,12 +73,17 @@ int install_branch_config(int flag, const char *local, const char *origin, const }strbuf_addf (&key,"branch.%s.remote" , local); -if (git_config_set_gently (key.buf, origin ? origin :"." ) <0 ) +if (git_config_set_gently (key.buf, actual_origin ? actual_origin :"." ) <0 ) + goto out_err; + +strbuf_reset (&key); +strbuf_addf (&key,"branch.%s.pushremote" , local); +if (git_config_set_gently (key.buf, actual_push_origin) <0 ) goto out_err;strbuf_reset (&key);strbuf_addf (&key,"branch.%s.merge" , local); -if (git_config_set_gently (key.buf, remote) <0 ) +if (git_config_set_gently (key.buf, actual_remote) <0 ) goto out_err;if (rebasing) {
@@ -88,27 +96,27 @@ int install_branch_config(int flag, const char *local, const char *origin, constif (flag &BRANCH_CONFIG_VERBOSE ) {if (shortname) { -if (origin) +if (actual_origin)printf_ln (rebasing ?_ ("Branch '%s' set up to track remote branch '%s' from '%s' by rebasing." ) :_ ("Branch '%s' set up to track remote branch '%s' from '%s'." ), - local, shortname, origin); + local, shortname, actual_origin);else printf_ln (rebasing ?_ ("Branch '%s' set up to track local branch '%s' by rebasing." ) :_ ("Branch '%s' set up to track local branch '%s'." ), local, shortname); }else { -if (origin) +if (actual_origin)printf_ln (rebasing ?_ ("Branch '%s' set up to track remote ref '%s' by rebasing." ) :_ ("Branch '%s' set up to track remote ref '%s'." ), - local, remote); + local, actual_remote);else printf_ln (rebasing ?_ ("Branch '%s' set up to track local ref '%s' by rebasing." ) :_ ("Branch '%s' set up to track local ref '%s'." ), - local, remote); + local, actual_remote); } }
@@ -119,9 +127,9 @@ int install_branch_config(int flag, const char *local, const char *origin, consterror (_ ("Unable to write upstream branch configuration" ));advise (_ (tracking_advice), - origin ? origin :"" , - origin ?"/" :"" , - shortname ? shortname : remote); + actual_origin ? actual_origin :"" , + actual_origin ?"/" :"" , + shortname ? shortname : actual_remote);return -1 ; }
branch.h +3 -0
@@ -14,6 +14,9 @@ enum branch_track { };extern enum branch_track git_branch_track; +extern const char * git_branch_remote; +extern const char * git_branch_push_remote; +extern const char * git_branch_merge;/* Functions for acting on the information about branches. */
config.c +15 -0
@@ -1599,6 +1599,21 @@ static int git_default_branch_config(const char *var, const char *value)return error (_ ("malformed value for %s" ), var);return 0 ; } +if (!strcmp (var,"branch.defaultremote" )) { +if (!value) +return config_error_nonbool (var); +return git_config_string (&git_branch_remote, var, value); + } +if (!strcmp (var,"branch.defaultpushremote" )) { +if (!value) +return config_error_nonbool (var); +return git_config_string (&git_branch_push_remote, var, value); + } +if (!strcmp (var,"branch.defaultmerge" )) { +if (!value) +return config_error_nonbool (var); +return git_config_string (&git_branch_merge, var, value); + }/* Add other config variables here and to Documentation/config.txt. */ return 0 ;
environment.c +3 -0
@@ -60,6 +60,9 @@ int global_conv_flags_eol = CONV_EOL_RNDTRP_WARN;char *check_roundtrip_encoding ="SHIFT-JIS" ;unsigned whitespace_rule_cfg =WS_DEFAULT_RULE ;enum branch_track git_branch_track =BRANCH_TRACK_REMOTE ; +const char * git_branch_remote =NULL ; +const char * git_branch_push_remote =NULL ; +const char * git_branch_merge =NULL ;enum rebase_setup_type autorebase =AUTOREBASE_NEVER ;enum push_default_type push_default =PUSH_DEFAULT_UNSPECIFIED ;#ifndef OBJECT_CREATION_MODE
t/t3200-branch.sh +57 -0
63 lines not on this page · raw message
Signature · 1 line
2.31.1
Re: [PATCH 1/1] config: support setting up a remote tracking branch upon creation
Quoted 3 lines · Ben Boeckel
The
branch.autoSetupMergeworks well for setting up tracking a local branch, but there is no mechanism to automatically set up a remote tracking situation.
This description is probably insufficient to explain what's missing, probably because "set up a remote tracking situation" is a bit fuzzy.
Without this patch, I can do this already:
$ git checkout -t -b topic origin/topic
And after the above, we have
[branch "topic"]
remote = origin
merge = refs/heads/topic
Of course, you can instead use a short-hand DWIM, e.g.
$ git checkout topic ;# assuming origin/topic exists
gives us the same thing. In either case, topic knows to integrate with the 'topic' branch from remote 'origin' and push back there.
So instead of saying "there is no mechanism to ...", be a bit more specific what you can and cannot do in this first paragraph.
Then we can describe the solution we'd propose in the second and subsequent paragraphs.
Thanks.
Documentation/config/branch.txt line 4
Quoted 4 lines
Documentation/config/branch.txt +4
-0+branch.defaultRemote:: + When a new branch is created with 'git branch', 'git switch' or 'git + checkout', this value will be used to initialize the + "branch.<name>.remote" setting.
You mean without "-t"? I offhand do not think of a reason why this is a good idea. How would one create local topic branches that you plan to merge locally into your own larger topic branch to be shared with others? Shouldn't there be an easy way to countermand the setting by this configuration?
Documentation/config/branch.txt line 9
Quoted 4 lines
Documentation/config/branch.txt +4
-0+branch.defaultPushRemote:: + When a new branch is created with 'git branch', 'git switch' or 'git + checkout', this value will be used to initialize the + "branch.<name>.pushRemote" setting.
Ditto.
Documentation/config/branch.txt line 14
Quoted 4 lines
Documentation/config/branch.txt +4
-0+branch.defaultMerge:: + When a new branch is created with 'git branch', 'git switch' or 'git + checkout', this value will be used to initialize the + "branch.<name>.merge" setting.
So the expected use case is to fork multiple local branches, to integrate with the same branch from the remote? I think we can already do
$ git checkout -t -b xyzzy origin/master
$ git checkout -t -b frotz origin/masterand you can lose -t with branch.autosetupmerge setting. As the "git branch" command needs to get the name of your branch (e.g. 'xyzzy' or 'frotz') and which remote tracking branch you start from (e.g. 'origin/master'), even with branch.{defaultRemote,defaultMerge} configuration, you wouldn't lose that many keystrokes, I suspect.
Or do you plan to make
$ git branch xyzzy
a short-hand for
$ git branch -t xyzzy origin/master
when defaultRemote and defaultMerge are set to 'origin' and 'refs/heads/master'? It would be way too confusing to start the new branch from origin/master in such a case, as everybody learned that "git branch xyzzy" that does not say where the branch initially points at uses HEAD.
Re: [PATCH 1/1] config: support setting up a remote tracking branch upon creation
Quoted 9 lines · Junio C Hamano
Quoted 3 lines · Ben Boeckel
The
branch.autoSetupMergeworks well for setting up tracking a local branch, but there is no mechanism to automatically set up a remote tracking situation.This description is probably insufficient to explain what's missing, probably because "set up a remote tracking situation" is a bit fuzzy.
Fair enough. I finally understood what was going on with "tracking" only recently. Usually I would track the remote's branch of the same name, but I found that "tracking" origin/master instead of myfork/topic makes fugitive render the following:
- commits on my topic that aren't integrated (this makes it easy to
tell it to "amend this commit" using its keybinding;
- commits on master that aren't on my topic (so I can see if there's anything relevant to rebase on top of); and
- diffs against my fork's branch (as last fetched) so that I can see the status.
Maybe this is a tooling issue, but I saw this as a potential way to avoid having to specify this information on every topic I create.
Quoted 3 lines
Without this patch, I can do this already:
$ git checkout -t -b topic origin/topic
I should note that the *vast* majority of my development is done using the fork-based workflow. I have remote.pushDefault set to my fork and I use push.default = simple (there are only a handful of repositories where "my fork" is also origin and I have, on multiple occasions, wanted to make forks even there).
My normal pattern is that I'm on the target branch already, so I have:
$ git checkout -b topic
which doesn't do any tracking. Just -t makes it track my *local* master when I really want it to track origin/master. AFAIK, there's no shortcut for this other than to give the full -t origin/master at branch creation time (and as something I do all the time).
Quoted 6 lines
And after the above, we have
[branch "topic"]
remote = origin
merge = refs/heads/topic
Quoted 6 lines
Of course, you can instead use a short-hand DWIM, e.g.
$ git checkout topic ;# assuming origin/topic existsgives us the same thing. In either case, topic knows to integrate with the 'topic' branch from remote 'origin' and push back there.
This doesn't match with my usual experience in fork-based workflows. I want the topic to track master and then my remote.pushDefault makes sure it goes to "the right place" when pushing.
Quoted 7 lines
So instead of saying "there is no mechanism to ...", be a bit more specific what you can and cannot do in this first paragraph.
Then we can describe the solution we'd propose in the second and subsequent paragraphs.
Thanks.
I'll work on an improved cover letter to give more background.
Quoted 10 lines
Documentation/config/branch.txt line 4
Quoted 4 lines
Documentation/config/branch.txt +4
-0+branch.defaultRemote:: + When a new branch is created with 'git branch', 'git switch' or 'git + checkout', this value will be used to initialize the + "branch.<name>.remote" setting.You mean without "-t"? I offhand do not think of a reason why this is a good idea. How would one create local topic branches that you plan to merge locally into your own larger topic branch to be shared with others? Shouldn't there be an easy way to countermand the setting by this configuration?
Everything goes through merge requests for the projects I work on day-to-day (even contributions to "my own" projects due to CI workflows). I added a test that --no-track works for this case (which given its rarity for me is the right tradeoff at least).
Quoted 16 lines
Documentation/config/branch.txt line 9
Quoted 4 lines
Documentation/config/branch.txt +4
-0+branch.defaultPushRemote:: + When a new branch is created with 'git branch', 'git switch' or 'git + checkout', this value will be used to initialize the + "branch.<name>.pushRemote" setting.Ditto.
Documentation/config/branch.txt line 14
Quoted 4 lines
Documentation/config/branch.txt +4
-0+branch.defaultMerge:: + When a new branch is created with 'git branch', 'git switch' or 'git + checkout', this value will be used to initialize the + "branch.<name>.merge" setting.So the expected use case is to fork multiple local branches, to integrate with the same branch from the remote? I think we can already do
Quoted 8 lines
$ git checkout -t -b xyzzy origin/master $ git checkout -t -b frotz origin/masterand you can lose -t with branch.autosetupmerge setting. As the "git branch" command needs to get the name of your branch (e.g. 'xyzzy' or 'frotz') and which remote tracking branch you start from (e.g. 'origin/master'), even with branch.{defaultRemote,defaultMerge} configuration, you wouldn't lose that many keystrokes, I suspect.
There are times that I want to branch from HEAD, but track master (for example, a branch destined for backporting to an older branch). The equivalent of:
$ git checkout release
$ git checkout -b backported-branch
$ git branch --set-upstream-to=origin/masterQuoted 6 lines
Or do you plan to make
$ git branch xyzzya short-hand for
Quoted 7 lines
$ git branch -t xyzzy origin/masterwhen defaultRemote and defaultMerge are set to 'origin' and 'refs/heads/master'? It would be way too confusing to start the new branch from origin/master in such a case, as everybody learned that "git branch xyzzy" that does not say where the branch initially points at uses HEAD.
No, it would just *track* origin/master, not branch from it. It should be shorthand for:
$ git branch xyzzy
$ git branch --set-upstream-to=origin/master xyzzyThough I personally use git checkout -b far more often to create branches. And since "every" branch I make would have -t origin/master, I wanted to have configuration to do this part for me.
Hopefully this gives a clearer picture of where I'm coming from.
Thanks,
--Ben
Re: [PATCH 1/1] config: support setting up a remote tracking branch upon creation
Quoted 1 line · Ben Boeckel
Hopefully this gives a clearer picture of where I'm coming from.
I think you gave descriptions to a reasonable level of detail to explain what your expected workflow is, to what extent the current tools support the workflow already, and what are still missing (and you want to extend the system to help).
The reason I asked these questions is to make sure that future readers of "git log" after your contribution becomes part of our history will not have to ask them (as you won't be as readily available to answer their questions). So please don't be content just because you answered and helped _me_ understand where you're coming from. Make sure an updated documentation and proposed log message explains them well to our future readers without your assistance.
Thanks.
cover Improve automatic setup of tracking for new branches
In reply to Ben BoeckelHi,
I recently discovered some of the nicer behaviors of the --track option for local branches (courtesy of vim-fugitive's status rendering). However, after a few weeks of slowly working -t origin/master into my workflow, I figured that Git could help me out here.
This patch adds two new configuration variables to initialize the branch.<name>.* settings for tracking remote branches.
I searched the docs (including Documentation/gitworkflows.txt), but didn't see anywhere to describe the fork-based workflow common on forges (such as GitHub and GitLab) where this felt "at home". I suppose I could describe the workflow I'm used to, but I think I'll hammer that out as blog posts before submitting it as documentation.
I suspect there are more tests that should be added.
Thanks,
--Ben
---
v1 -> v2:
- removed branch.defaultPushRemote (remote.pushDefault covers this case already)
- improved the commit message with more background and an expanation of the intended uses
Ben Boeckel (1):
config: support a default remote tracking setup upon branch creation
Documentation/config/branch.txt | 14 ++++++++++++ branch.c | 22 ++++++++++--------- branch.h | 2 ++ config.c | 10 +++++++++ environment.c | 2 ++ t/t3200-branch.sh | 39 +++++++++++++++++++++++++++++++++ 6 files changed, 79 insertions(+), 10 deletions(-)
base-commit: eb27b338a3e71c7c4079fbac8aeae3f8fbb5c687
Signature · 1 line
2.31.1
PATCH 1/1 config: support a default remote tracking setup upon branch creation
The branch.autoSetupMerge works well today for setting up tracking a local branch, but there is no easy mechanism to automatically set up a remote tracking situation for workflows which use a single set of branches for integration without specifying --track to every branch creation command or branching directly from the remote ref. This patch adds the following configuration values:
- branch.defaultRemote: initializes branch.<name>.remote if not
otherwise given;
- branch.defaultMerge: initializes branch.<name>.merge if not otherwise given.
These effectively make branch creation commands such as git branch, git switch, and git checkout -b have an implicit -t ${branch.defaultRemote}/${branch.defaultMerge} argument and is equivalent to doing:
$ git branch new-topic # or another branch creation command
$ git branch --set-upstream-to=${branch.defaultRemote}/${branch.defaultMerge} new-topicIn a fork-based workflow where contributions to the main project flow in through forks of the main repository rather than pushing directly to it (not uncommon of forge-hosted projects), the following setup may be used:
$ git config remote.pushDefault myfork # push to `myfork` by default
$ git config push.default simple # the default
$ git config branch.autoSetupMerge always # always setup tracking
$ git config branch.defaultRemote origin # track from `origin`
$ git config branch.defaultMerge main # track the `main` branchWith this setup, branches will automatically be set up to track origin/main while being pushed to myfork by default. Some tools (at least Vim's fugitive plugin) will show the commit differences between both the tracking branch and the default push target. This allows such tools to easily show "what needs to be merged?", "what has happened on the target branch since this topic has been created?", and "what is my status against my fork's current status?" at a glance.
Additionally, with the extensions.worktreeConfig setting, when a separate work tree which is used for changes against a different branch (e.g., a branch tracking a prior release), the branch.defaultMerge setting may be changed independently, e.g., to maint.
--- Documentation/config/branch.txt | 14 ++++++++++++ branch.c | 22 ++++++++++--------- branch.h | 2 ++ config.c | 10 +++++++++ environment.c | 2 ++ t/t3200-branch.sh | 39 +++++++++++++++++++++++++++++++++ 6 files changed, 79 insertions(+), 10 deletions(-)
Documentation/config/branch.txt +14 -0
@@ -1,3 +1,17 @@ +branch.defaultRemote:: + Tells 'git branch', 'git switch' and 'git checkout' to set up new branches + so that it will track a branch on the specified remote. This can be + used, in conjunction with `branch.defaultMerge`, in projects where + branches tend to target a single branch. This will be used to + initialize the "branch.<name>.remote" setting. + +branch.defaultMerge:: + Tells 'git branch', 'git switch' and 'git checkout' to set up new branches + so that it will track a branch with this name. This can be used, in + conjunction with `branch.defaultRemote` in projects where branches tend + to target a single branch. This will be used to initialize the + "branch.<name>.merge" setting. + branch.autoSetupMerge:: Tells 'git branch', 'git switch' and 'git checkout' to set up new branches so that linkgit:git-pull[1] will appropriately merge from the
branch.c +12 -10
@@ -60,6 +60,8 @@ int install_branch_config(int flag, const char *local, const char *origin, constconst char *shortname =NULL ;struct strbuf key =STRBUF_INIT ;int rebasing =should_setup_rebase (origin); +const char *actual_origin = origin ? origin : git_branch_remote; +const char *actual_remote = remote ? remote : git_branch_merge;if (skip_prefix (remote,"refs/heads/" , &shortname) && !strcmp(local, shortname)
@@ -70,12 +72,12 @@ int install_branch_config(int flag, const char *local, const char *origin, const }strbuf_addf (&key,"branch.%s.remote" , local); -if (git_config_set_gently (key.buf, origin ? origin :"." ) <0 ) +if (git_config_set_gently (key.buf, actual_origin ? actual_origin :"." ) <0 ) goto out_err;strbuf_reset (&key);strbuf_addf (&key,"branch.%s.merge" , local); -if (git_config_set_gently (key.buf, remote) <0 ) +if (git_config_set_gently (key.buf, actual_remote) <0 ) goto out_err;if (rebasing) {
@@ -88,27 +90,27 @@ int install_branch_config(int flag, const char *local, const char *origin, constif (flag &BRANCH_CONFIG_VERBOSE ) {if (shortname) { -if (origin) +if (actual_origin)printf_ln (rebasing ?_ ("Branch '%s' set up to track remote branch '%s' from '%s' by rebasing." ) :_ ("Branch '%s' set up to track remote branch '%s' from '%s'." ), - local, shortname, origin); + local, shortname, actual_origin);else printf_ln (rebasing ?_ ("Branch '%s' set up to track local branch '%s' by rebasing." ) :_ ("Branch '%s' set up to track local branch '%s'." ), local, shortname); }else { -if (origin) +if (actual_origin)printf_ln (rebasing ?_ ("Branch '%s' set up to track remote ref '%s' by rebasing." ) :_ ("Branch '%s' set up to track remote ref '%s'." ), - local, remote); + local, actual_remote);else printf_ln (rebasing ?_ ("Branch '%s' set up to track local ref '%s' by rebasing." ) :_ ("Branch '%s' set up to track local ref '%s'." ), - local, remote); + local, actual_remote); } }
@@ -119,9 +121,9 @@ int install_branch_config(int flag, const char *local, const char *origin, consterror (_ ("Unable to write upstream branch configuration" ));advise (_ (tracking_advice), - origin ? origin :"" , - origin ?"/" :"" , - shortname ? shortname : remote); + actual_origin ? actual_origin :"" , + actual_origin ?"/" :"" , + shortname ? shortname : actual_remote);return -1 ; }
branch.h +2 -0
@@ -14,6 +14,8 @@ enum branch_track { };extern enum branch_track git_branch_track; +extern const char * git_branch_remote; +extern const char * git_branch_merge;/* Functions for acting on the information about branches. */
config.c +10 -0
@@ -1599,6 +1599,16 @@ static int git_default_branch_config(const char *var, const char *value)return error (_ ("malformed value for %s" ), var);return 0 ; } +if (!strcmp (var,"branch.defaultremote" )) { +if (!value) +return config_error_nonbool (var); +return git_config_string (&git_branch_remote, var, value); + } +if (!strcmp (var,"branch.defaultmerge" )) { +if (!value) +return config_error_nonbool (var); +return git_config_string (&git_branch_merge, var, value); + }/* Add other config variables here and to Documentation/config.txt. */ return 0 ;
environment.c +2 -0
@@ -60,6 +60,8 @@ int global_conv_flags_eol = CONV_EOL_RNDTRP_WARN;char *check_roundtrip_encoding ="SHIFT-JIS" ;unsigned whitespace_rule_cfg =WS_DEFAULT_RULE ;enum branch_track git_branch_track =BRANCH_TRACK_REMOTE ; +const char * git_branch_remote =NULL ; +const char * git_branch_merge =NULL ;enum rebase_setup_type autorebase =AUTOREBASE_NEVER ;enum push_default_type push_default =PUSH_DEFAULT_UNSPECIFIED ;#ifndef OBJECT_CREATION_MODE
t/t3200-branch.sh +39 -0
@@ -797,6 +797,45 @@ test_expect_success 'test tracking setup via --track but deeper' ' test "$(git config branch.my7.merge)" = refs/heads/o/o ' +test_expect_success 'test tracking setup via branch.default* and --track' ' + git config branch.autosetupmerge always && + git config branch.defaultremote local && + git config branch.defaultmerge main && + git config remote.local.url . && + git config remote.local.fetch refs/heads/*:refs/remotes/local/* && + (git show-ref -q refs/remotes/local/main || git fetch local) && + git branch --track other/foo my2 && + git config branch.autosetupmerge false && + test "$(git config branch.my2.remote)" = other && + test "$(git config branch.my2.merge)" = refs/heads/foo +' + +test_expect_success 'test tracking setup via branch.default* and --no-track' ' + git config branch.autosetupmerge always && + git config branch.defaultremote local && + git config branch.defaultmerge main && + git config remote.local.url . && + git config remote.local.fetch refs/heads/*:refs/remotes/local/* && + (git show-ref -q refs/remotes/local/main || git fetch local) && + git branch --no-track my2 && + git config branch.autosetupmerge false && + ! test "$(git config branch.my2.remote)" = local && + ! test "$(git config branch.my2.merge)" = refs/heads/main +' + +test_expect_success 'test tracking setup via branch.default*' ' + git config branch.autosetupmerge always && + git config branch.defaultremote local && + git config branch.defaultmerge main && + git config remote.local.url . && + git config remote.local.fetch refs/heads/*:refs/remotes/local/* && + (git show-ref -q refs/remotes/local/main || git fetch local) && + git branch my2 && + git config branch.autosetupmerge false && + test "$(git config branch.my2.remote)" = local && + test "$(git config branch.my2.merge)" = refs/heads/main +' + test_expect_success 'test deleting branch deletes branch config' ' git branch -d my7 && test -z "$(git config branch.my7.remote)" &&
Signature · 1 line
2.31.1
Re: [PATCH 1/1] config: support a default remote tracking setup upon branch creation
Le 2021-07-28 à 22:01, Ben Boeckel a écrit :
Quoted 20 lines
The
branch.autoSetupMergeworks well today for setting up tracking a local branch, but there is no easy mechanism to automatically set up a remote tracking situation for workflows which use a single set of branches for integration without specifying--trackto every branch creation command or branching directly from the remote ref. This patch adds the following configuration values:-
branch.defaultRemote: initializesbranch.<name>.remoteif nototherwise given;-
branch.defaultMerge: initializesbranch.<name>.mergeif not otherwise given.These effectively make branch creation commands such as
git branch,git switch, andgit checkout -bhave an implicit-t ${branch.defaultRemote}/${branch.defaultMerge}argument and is equivalent to doing:$ git branch new-topic # or another branch creation command $ git branch --set-upstream-to=${branch.defaultRemote}/${branch.defaultMerge} new-topic
Quoted 8 lines
In a fork-based workflow where contributions to the main project flow in through forks of the main repository rather than pushing directly to it (not uncommon of forge-hosted projects), the following setup may be used:
$ git config remote.pushDefault myfork # push to `myfork` by default $ git config push.default simple # the default $ git config branch.autoSetupMerge always # always setup tracking
OK, so if I understand correctly this exisiting setting has to be changed to 'always' for the new settings you are adding to take effect, right ? I think this does make sense, reading the description of 'branch.autoSetupMerge', but maybe it should be spelled explicitely in the text of the commit message, and not just mentioned here in this terminal session excerpt.
Quoted 2 lines
$ git config branch.defaultRemote origin # track from `origin`
$ git config branch.defaultMerge main # track the `main` branchSmall nit: maybe I would invert these two, so it can read:
$ git config branch.defaultMerge main # track the `main` branch ...
$ git config branch.defaultRemote origin # ... from `origin`Quoted 9 lines
With this setup, branches will automatically be set up to track
origin/mainwhile being pushed tomyforkby default. Some tools (at least Vim's fugitive plugin) will show the commit differences between both the tracking branch and the default push target. This allows such tools to easily show "what needs to be merged?", "what has happened on the target branch since this topic has been created?", and "what is my status against my fork's current status?" at a glance.
Quoted 4 lines
Additionally, with the
extensions.worktreeConfigsetting, when a separate work tree which is used for changes against a different branch (e.g., a branch tracking a prior release), thebranch.defaultMergesetting may be changed independently, e.g., tomaint.
This last paragraph is not explicitely needed, as nothing relating to 'extensions.worktreeConfig' is changed here right ? It's just the normal way that this setting works.
Quoted 19 lines
Signed-off-by Ben Boeckel <[email protected]>--- Documentation/config/branch.txt | 14 ++++++++++++ branch.c | 22 ++++++++++--------- branch.h | 2 ++ config.c | 10 +++++++++ environment.c | 2 ++ t/t3200-branch.sh | 39 +++++++++++++++++++++++++++++++++ 6 files changed, 79 insertions(+), 10 deletions(-)Documentation/config/branch.txt +3
-0@@ -1,3 +1,17 @@ +branch.defaultRemote:: + Tells 'git branch', 'git switch' and 'git checkout' to set up new branches + so that it will track a branch on the specified remote. This can be
Documentation/config/branch.txt line 13
Quoted 10 lines
Documentation/config/branch.txt +10
-0+ used, in conjunction with `branch.defaultMerge`, in projects where + branches tend to target a single branch. This will be used to + initialize the "branch.<name>.remote" setting. + +branch.defaultMerge:: + Tells 'git branch', 'git switch' and 'git checkout' to set up new branches + so that it will track a branch with this name. This can be used, in + conjunction with `branch.defaultRemote` in projects where branches tend + to target a single branch. This will be used to initialize the + "branch.<name>.merge" setting.
For the two setting above, if 'branch.autoSetupMerge' must be set to 'always' for the settings to work, I think it should be explicitely mentioned.
Quoted 117 lines
Documentation/config/branch.txt +1
-0+ branch.autoSetupMerge:: Tells 'git branch', 'git switch' and 'git checkout' to set up new branches so that linkgit:git-pull[1] will appropriately merge from thebranch.c +12
-10@@ -60,6 +60,8 @@ int install_branch_config(int flag, const char *local, const char *origin, constconst char *shortname =NULL ;struct strbuf key =STRBUF_INIT ;int rebasing =should_setup_rebase (origin); +const char *actual_origin = origin ? origin : git_branch_remote; +const char *actual_remote = remote ? remote : git_branch_merge;if (skip_prefix (remote,"refs/heads/" , &shortname) && !strcmp(local, shortname)@@ -70,12 +72,12 @@ int install_branch_config(int flag, const char *local, const char *origin, const }strbuf_addf (&key,"branch.%s.remote" , local); -if (git_config_set_gently (key.buf, origin ? origin :"." ) <0 ) +if (git_config_set_gently (key.buf, actual_origin ? actual_origin :"." ) <0 ) goto out_err;strbuf_reset (&key);strbuf_addf (&key,"branch.%s.merge" , local); -if (git_config_set_gently (key.buf, remote) <0 ) +if (git_config_set_gently (key.buf, actual_remote) <0 ) goto out_err;if (rebasing) {@@ -88,27 +90,27 @@ int install_branch_config(int flag, const char *local, const char *origin, constif (flag &BRANCH_CONFIG_VERBOSE ) {if (shortname) { -if (origin) +if (actual_origin)printf_ln (rebasing ?_ ("Branch '%s' set up to track remote branch '%s' from '%s' by rebasing." ) :_ ("Branch '%s' set up to track remote branch '%s' from '%s'." ), - local, shortname, origin); + local, shortname, actual_origin);else printf_ln (rebasing ?_ ("Branch '%s' set up to track local branch '%s' by rebasing." ) :_ ("Branch '%s' set up to track local branch '%s'." ), local, shortname); }else { -if (origin) +if (actual_origin)printf_ln (rebasing ?_ ("Branch '%s' set up to track remote ref '%s' by rebasing." ) :_ ("Branch '%s' set up to track remote ref '%s'." ), - local, remote); + local, actual_remote);else printf_ln (rebasing ?_ ("Branch '%s' set up to track local ref '%s' by rebasing." ) :_ ("Branch '%s' set up to track local ref '%s'." ), - local, remote); + local, actual_remote); } }@@ -119,9 +121,9 @@ int install_branch_config(int flag, const char *local, const char *origin, consterror (_ ("Unable to write upstream branch configuration" ));advise (_ (tracking_advice), - origin ? origin :"" , - origin ?"/" :"" , - shortname ? shortname : remote); + actual_origin ? actual_origin :"" , + actual_origin ?"/" :"" , + shortname ? shortname : actual_remote);return -1 ; }branch.h +2
-0@@ -14,6 +14,8 @@ enum branch_track { };extern enum branch_track git_branch_track; +extern const char * git_branch_remote; +extern const char * git_branch_merge;/* Functions for acting on the information about branches. */ config.c +10
-0@@ -1599,6 +1599,16 @@ static int git_default_branch_config(const char *var, const char *value)return error (_ ("malformed value for %s" ), var);return 0 ; } +if (!strcmp (var,"branch.defaultremote" )) { +if (!value) +return config_error_nonbool (var); +return git_config_string (&git_branch_remote, var, value); + } +if (!strcmp (var,"branch.defaultmerge" )) { +if (!value) +return config_error_nonbool (var); +return git_config_string (&git_branch_merge, var, value); + }/* Add other config variables here and to Documentation/config.txt. */ return 0 ;environment.c +0
-0
environment.c int global_conv_flags_eol = CONV_EOL_RNDTRP_WARN; · line 64
Quoted 5 lines
environment.c +2
-0@@ -60,6 +60,8 @@ int global_conv_flags_eol = CONV_EOL_RNDTRP_WARN;char *check_roundtrip_encoding ="SHIFT-JIS" ;unsigned whitespace_rule_cfg =WS_DEFAULT_RULE ;enum branch_track git_branch_track =BRANCH_TRACK_REMOTE ; +const char * git_branch_remote =NULL ; +const char * git_branch_merge =NULL ;
Can the new settings be implemented without adding more global variables ? I think we are trying to move away from these. Apart from that the code looks OK to me.
t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 801
Quoted 13 lines
environment.c +0
-0enum rebase_setup_type autorebase =AUTOREBASE_NEVER ;enum push_default_type push_default =PUSH_DEFAULT_UNSPECIFIED ;#ifndef OBJECT_CREATION_MODE t/t3200-branch.sh +2
-0@@ -797,6 +797,45 @@ test_expect_success 'test tracking setup via --track but deeper' ' test "$(git config branch.my7.merge)" = refs/heads/o/o ' +test_expect_success 'test tracking setup via branch.default* and --track' ' + git config branch.autosetupmerge always &&
You can use 'test_config branch.autosetupmerge always' so that the config is only active for the duration of the 'test_expect_success' block (see t/test-lib-functions.sh).
t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 809
Quoted 8 lines
t/t3200-branch.sh +8
-0+ git config branch.defaultremote local && + git config branch.defaultmerge main && + git config remote.local.url . && + git config remote.local.fetch refs/heads/*:refs/remotes/local/* && + (git show-ref -q refs/remotes/local/main || git fetch local) && + git branch --track other/foo my2 && + git config branch.autosetupmerge false && + test "$(git config branch.my2.remote)" = other &&
Here and for the following line you can use 'test_cmp_config'.
t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 811
Quoted 2 lines
t/t3200-branch.sh +2
-0+ test "$(git config branch.my2.merge)" = refs/heads/foo +'
This tests checks that an explicit '--track' argument overrides the new configs. I would name it something like "'--track overrides 'branch.default{merge,remote}'" or something like this. I would also add another test before this one that just checks that the new settings by themselves work as expected;
i.e. a simple 'git checkout -b' and verifying that the
tracking info is correctly configured according to 'branch.default{merge,remote}'.
t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 823
Quoted 12 lines
t/t3200-branch.sh +12
-0+ +test_expect_success 'test tracking setup via branch.default* and --no-track' ' + git config branch.autosetupmerge always && + git config branch.defaultremote local && + git config branch.defaultmerge main && + git config remote.local.url . && + git config remote.local.fetch refs/heads/*:refs/remotes/local/* && + (git show-ref -q refs/remotes/local/main || git fetch local) && + git branch --no-track my2 && + git config branch.autosetupmerge false && + ! test "$(git config branch.my2.remote)" = local && + ! test "$(git config branch.my2.merge)" = refs/heads/main
Here you expect the configs to be absent, so for more clarity you could do
git config branch.my2.remote >remote &&
test_must_be_empty remoteand the same for merge.
Quoted 9 lines
t/t3200-branch.sh +8
-0+' + +test_expect_success 'test tracking setup via branch.default*' ' + git config branch.autosetupmerge always && + git config branch.defaultremote local && + git config branch.defaultmerge main && + git config remote.local.url . && + git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&
t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 841
Quoted 10 lines
t/t3200-branch.sh +7
-0+ (git show-ref -q refs/remotes/local/main || git fetch local) && + git branch my2 && + git config branch.autosetupmerge false && + test "$(git config branch.my2.remote)" = local && + test "$(git config branch.my2.merge)" = refs/heads/main +' + test_expect_success 'test deleting branch deletes branch config' ' git branch -d my7 && test -z "$(git config branch.my7.remote)" &&
Oh, so here is the 'just test the new settings' test. Let's move that one to be before the two others.
Another test that could be added is one that does not change 'branch.autosetupmerge' but sets the new configs, and checks that the tracking info is *not* set.
Cheers,
Philippe.
Re: [PATCH 1/1] config: support a default remote tracking setup upon branch creation
Quoted 10 lines · Philippe Blain
Le 2021-07-28 à 22:01, Ben Boeckel a écrit :
Quoted 3 lines
$ git config remote.pushDefault myfork # push to `myfork` by default $ git config push.default simple # the default $ git config branch.autoSetupMerge always # always setup trackingOK, so if I understand correctly this exisiting setting has to be changed to 'always' for the new settings you are adding to take effect, right ? I think this does make sense, reading the description of 'branch.autoSetupMerge', but maybe it should be spelled explicitely in the text of the commit message, and not just mentioned here in this terminal session excerpt.
Good point. I'll add it.
Quoted 7 lines
Quoted 2 lines
$ git config branch.defaultRemote origin # track from `origin` $ git config branch.defaultMerge main # track the `main` branchSmall nit: maybe I would invert these two, so it can read:
$ git config branch.defaultMerge main # track the `main` branch ... $ git config branch.defaultRemote origin # ... from `origin`
Agreed.
Quoted 8 lines
Quoted 4 lines
Additionally, with the
extensions.worktreeConfigsetting, when a separate work tree which is used for changes against a different branch (e.g., a branch tracking a prior release), thebranch.defaultMergesetting may be changed independently, e.g., tomaint.This last paragraph is not explicitely needed, as nothing relating to 'extensions.worktreeConfig' is changed here right ? It's just the normal way that this setting works.
Yes. I'll mention more explicitly that this is the reason for preserving split settings (rather than a single branch.defaultTrack = origin/main setting that I had thought about until I saw the --worktree flag to git config and was intrigued).
Quoted 8 lines
Quoted 8 lines
Documentation/config/branch.txt +8
-0+branch.defaultRemote:: + Tells 'git branch', 'git switch' and 'git checkout' to set up new branches + so that it will track a branch on the specified remote. This can be + used, in conjunction with `branch.defaultMerge`, in projects where + branches tend to target a single branch. This will be used to + initialize the "branch.<name>.remote" setting. + +branch.defaultMerge::
Quoted 8 lines
Documentation/config/branch.txt line 13
Quoted 5 lines
Documentation/config/branch.txt +5
-0+ Tells 'git branch', 'git switch' and 'git checkout' to set up new branches + so that it will track a branch with this name. This can be used, in + conjunction with `branch.defaultRemote` in projects where branches tend + to target a single branch. This will be used to initialize the + "branch.<name>.merge" setting.For the two setting above, if 'branch.autoSetupMerge' must be set to 'always' for the settings to work, I think it should be explicitely mentioned.
Will update.
Quoted 6 lines
Quoted 6 lines
environment.c +0
-0@@ -60,6 +60,8 @@ int global_conv_flags_eol = CONV_EOL_RNDTRP_WARN;char *check_roundtrip_encoding ="SHIFT-JIS" ;
Quoted 8 lines
environment.c int global_conv_flags_eol = CONV_EOL_RNDTRP_WARN; · line 64
Quoted 4 lines
environment.c +2
-0unsigned whitespace_rule_cfg =WS_DEFAULT_RULE ;enum branch_track git_branch_track =BRANCH_TRACK_REMOTE ; +const char * git_branch_remote =NULL ; +const char * git_branch_merge =NULL ;Can the new settings be implemented without adding more global variables ? I think we are trying to move away from these. Apart from that the code looks OK to me.
I'm all for that, but didn't see guidance on where such things should be stored. There's not a "context" object passed around, but I guess stuffing it into repository is fine? This also gives a nice place to free them rather than just leaking them too.
Alas, after some cursory investigation, config.c@@git_default_branch_config does not have access to "the repository" and the cb in git_default_config seems to be ~always be NULL. So maybe that will have to wait for further refactoring of the configuration tracking logic?
Quoted 8 lines
Quoted 8 lines
t/t3200-branch.sh +0
-0@@ -797,6 +797,45 @@ test_expect_success 'test tracking setup via --track but deeper' ' test "$(git config branch.my7.merge)" = refs/heads/o/o '
Quoted 6 lines
t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 801
Quoted 2 lines
t/t3200-branch.sh +2
-0+test_expect_success 'test tracking setup via branch.default* and --track' ' + git config branch.autosetupmerge always &&You can use '
test_configbranch.autosetupmerge always' so that the config is only active for the duration of the 'test_expect_success' block (seet/test-lib-functions.sh).
Nifty.
Quoted 65 lines
t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 809
Quoted 8 lines
t/t3200-branch.sh +8
-0+ git config branch.defaultremote local && + git config branch.defaultmerge main && + git config remote.local.url . && + git config remote.local.fetch refs/heads/*:refs/remotes/local/* && + (git show-ref -q refs/remotes/local/main || git fetch local) && + git branch --track other/foo my2 && + git config branch.autosetupmerge false && + test "$(git config branch.my2.remote)" = other &&Here and for the following line you can use '
test_cmp_config'.t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 811
Quoted 2 lines
t/t3200-branch.sh +2
-0+ test "$(git config branch.my2.merge)" = refs/heads/foo +'This tests checks that an explicit '--track' argument overrides the new configs. I would name it something like "'--track overrides 'branch.default{merge,remote}'" or something like this. I would also add another test before this one that just checks that the new settings by themselves work as expected;
i.e. a simple 'git checkout -b' and verifying that the
tracking info is correctly configured according to 'branch.default{merge,remote}'.t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 823
Quoted 12 lines
t/t3200-branch.sh +12
-0+ +test_expect_success 'test tracking setup via branch.default* and --no-track' ' + git config branch.autosetupmerge always && + git config branch.defaultremote local && + git config branch.defaultmerge main && + git config remote.local.url . && + git config remote.local.fetch refs/heads/*:refs/remotes/local/* && + (git show-ref -q refs/remotes/local/main || git fetch local) && + git branch --no-track my2 && + git config branch.autosetupmerge false && + ! test "$(git config branch.my2.remote)" = local && + ! test "$(git config branch.my2.merge)" = refs/heads/mainHere you expect the configs to be absent, so for more clarity you could do
git config branch.my2.remote >remote && test_must_be_empty remoteand the same for merge.
Quoted 9 lines
t/t3200-branch.sh +8
-0+' + +test_expect_success 'test tracking setup via branch.default*' ' + git config branch.autosetupmerge always && + git config branch.defaultremote local && + git config branch.defaultmerge main && + git config remote.local.url . && + git config remote.local.fetch refs/heads/*:refs/remotes/local/* &&t/t3200-branch.sh test_expect_success 'test tracking setup via --track but deeper' ' · line 841
Quoted 10 lines
t/t3200-branch.sh +7
-0+ (git show-ref -q refs/remotes/local/main || git fetch local) && + git branch my2 && + git config branch.autosetupmerge false && + test "$(git config branch.my2.remote)" = local && + test "$(git config branch.my2.merge)" = refs/heads/main +' + test_expect_success 'test deleting branch deletes branch config' ' git branch -d my7 && test -z "$(git config branch.my7.remote)" &&Oh, so here is the 'just test the new settings' test. Let's move that one to be before the two others.
Quoted 3 lines
Another test that could be added is one that does not change 'branch.autosetupmerge' but sets the new configs, and checks that the tracking info is *not* set.
I'll make the test suite updates as well.
Thanks for the review,
--Ben
Re: [PATCH 1/1] config: support a default remote tracking setup upon branch creation
In reply to Philippe BlainQuoted 10 lines · Philippe Blain
environment.c int global_conv_flags_eol = CONV_EOL_RNDTRP_WARN; · line 64
Quoted 10 lines
environment.c +2
-0@@ -60,6 +60,8 @@ int global_conv_flags_eol = CONV_EOL_RNDTRP_WARN;char *check_roundtrip_encoding ="SHIFT-JIS" ;unsigned whitespace_rule_cfg =WS_DEFAULT_RULE ;enum branch_track git_branch_track =BRANCH_TRACK_REMOTE ; +const char * git_branch_remote =NULL ; +const char * git_branch_merge =NULL ;
Style:
(1) asterisk sticks to the identifier, not type, in our codebase.
(2) do not initialize globals and statics to 0 or NULL.
Quoted 1 line
Can the new settings be implemented without adding more global variables ?
This is worth considering in the longer term. For things like these new configuration items and existign git_branch_track, we already have reasonably made abstraction that branch.c is where interesting actions happen (like setting up remote tracking, etc), so there is no reason for them to be in environment.c or *.h to be visible to anywhere outside branch.c file.
I wonder if it is a matter of moving git_default_branch_config() to branch.c from config.c and make it global, while moving these global variables also to branch.c and make them file-local?
I am still unsure without the expected use-case well documented, if it is clear enough for users to learn how and when these new configurations should be used (as opposed to following the traditional triangular workflow) with only the documentation updates in this patch, but at least I can trust others like you to give input to polish this into a reasonable shape.
Thanks for a review (and thanks for starting the effort, Ben).
Re: [PATCH 1/1] config: support a default remote tracking setup upon branch creation
In reply to Ben BoeckelQuoted 11 lines · Ben Boeckel
The
branch.autoSetupMergeworks well today for setting up tracking a local branch, but there is no easy mechanism to automatically set up a remote tracking situation for workflows which use a single set of branches for integration without specifying--trackto every branch creation command or branching directly from the remote ref. This patch adds the following configuration values:-
branch.defaultRemote: initializesbranch.<name>.remoteif nototherwise given;-
branch.defaultMerge: initializesbranch.<name>.mergeif not otherwise given.
Not a new issue per-se, but what if you've got a branch called defaultRemote? It seems to me that any new branch.<name>.* config closes the door for a <name> we squat on.
Given that we have checkout.defaultRemote and this also affects switch/checkout it seems better to continue in the checkout.* namespace even if it wasn't for that, but given the config squatting issue especially so....
For what it's worth I usually use the checkout.defaultRemote option (which I added) and:
git checkout master &&
git branch -m master <topic-name>
See 8d7b558baeb (checkout & worktree: introduce checkout.defaultRemote, 2018-06-05). It seems to me from that patch diff that you could modify some docs / tests for this, no? E.g. how it interacts with git-worktree.
I like this direction, but just have a concern that this is a place where we need to consider all the UX in the area overall, and that any options/config don't overtly interact in a bad way.
Re: [PATCH 1/1] config: support a default remote tracking setup upon branch creation
Quoted 8 lines · Ævar Arnfjörð Bjarmason
Quoted 7 lines · Ben Boeckel
The
branch.autoSetupMergeworks well today for setting up tracking a local branch, but there is no easy mechanism to automatically set up a remote tracking situation for workflows which use a single set of branches for integration without specifying--trackto every branch creation command or branching directly from the remote ref. This patch adds the following configuration values:
Quoted 8 lines
Quoted 4 lines
-
branch.defaultRemote: initializesbranch.<name>.remoteif nototherwise given;-
branch.defaultMerge: initializesbranch.<name>.mergeif not otherwise given.Not a new issue per-se, but what if you've got a branch called defaultRemote? It seems to me that any new branch.<name>.* config closes the door for a <name> we squat on.
It doesn't seem that shadowing is actually a thing:
% git init
Initialized empty Git repository in …/git-shadow/.git/ % git config foo.bar true
% git config foo.bar.baz true
% git config --get foo.bar
true
% git config --get foo.bar.baz
true
Quoted 8 lines
Given that we have checkout.defaultRemote and this also affects switch/checkout it seems better to continue in the checkout.* namespace even if it wasn't for that, but given the config squatting issue especially so....
For what it's worth I usually use the checkout.defaultRemote option (which I added) and:
Quoted 6 lines
git checkout master &&
git branch -m master <topic-name>See
8d7b558baeb(checkout & worktree: introduce checkout.defaultRemote, 2018-06-05). It seems to me from that patch diff that you could modify some docs / tests for this, no? E.g. how it interacts with git-worktree.
I think it would be weird for checkout.* to affect git branch which does no checkout at all. I want it to set up for simple branch creation as well, so this would be a hole in my use case.
Quoted 3 lines
I like this direction, but just have a concern that this is a place where we need to consider all the UX in the area overall, and that any options/config don't overtly interact in a bad way.
I'll have to look at adding test cases as to how it interacts with checkout.defaultRemote.
Thanks,
--Ben
Re: [PATCH 1/1] config: support a default remote tracking setup upon branch creation
Quoted 20 lines · Ben Boeckel
Quoted 8 lines · Ævar Arnfjörð Bjarmason
Quoted 7 lines · Ben Boeckel
The
branch.autoSetupMergeworks well today for setting up tracking a local branch, but there is no easy mechanism to automatically set up a remote tracking situation for workflows which use a single set of branches for integration without specifying--trackto every branch creation command or branching directly from the remote ref. This patch adds the following configuration values:Quoted 8 lines
Quoted 4 lines
-
branch.defaultRemote: initializesbranch.<name>.remoteif nototherwise given;-
branch.defaultMerge: initializesbranch.<name>.mergeif not otherwise given.Not a new issue per-se, but what if you've got a branch called defaultRemote? It seems to me that any new branch.<name>.* config closes the door for a <name> we squat on.
It doesn't seem that shadowing is actually a thing:
Quoted 8 lines
% git init
Initialized empty Git repository in …/git-shadow/.git/ % git config foo.bar true
% git config foo.bar.baz true
% git config --get foo.bar
true
% git config --get foo.bar.baz
true
You're right, I was misrecalling (or mis-imagining) some edge case there that doesn't exist. I also tested setting branch.defaultRemote=true and moving a branch.defaultRemote.* branch with "git branch -m", but it also does the right thing. Nevermind.
Quoted 11 lines
Quoted 11 lines
Given that we have checkout.defaultRemote and this also affects switch/checkout it seems better to continue in the checkout.* namespace even if it wasn't for that, but given the config squatting issue especially so....
For what it's worth I usually use the checkout.defaultRemote option (which I added) and:
git checkout master &&
git branch -m master <topic-name>
Quoted 7 lines
Quoted 3 lines
See
8d7b558baeb(checkout & worktree: introduce checkout.defaultRemote, 2018-06-05). It seems to me from that patch diff that you could modify some docs / tests for this, no? E.g. how it interacts with git-worktree.I think it would be weird for
checkout.*to affectgit branchwhich does no checkout at all. I want it to set up for simple branch creation as well, so this would be a hole in my use case.
*nod*, although your approach has the opposite problem of making branch creation with "checkout" and "switch" (and presumably "worktree") impacted by "branch.*' config.
In a way that's more sensible, in that we can imagine those commands calling "git branch" under the hood (which msotly doesn't actually happen, except I think in the worktree case, but it's the same underlying APIs).
..
Quoted 8 lines
Quoted 3 lines
I like this direction, but just have a concern that this is a place where we need to consider all the UX in the area overall, and that any options/config don't overtly interact in a bad way.
I'll have to look at adding test cases as to how it interacts with
checkout.defaultRemote.Thanks,
....right, none of that mess is a showstopper, I'm just prodding you to look at if any of those edge cases are made better/worse by these additions. Thanks!
Quoted 3 lines · Ben Boeckel
I searched the docs (including
Documentation/gitworkflows.txt), but didn't see anywhere to describe the fork-based workflow common on forges (such as GitHub and GitLab) where this felt "at home".
Before you came, many users have used Git with these forges, so it might be just the matter of correct terminology to use to find what to read about. Does the keyword "triangular workflow" find what may help your way of working?
Quoted 9 lines · Junio C Hamano
Quoted 3 lines · Ben Boeckel
I searched the docs (including
Documentation/gitworkflows.txt), but didn't see anywhere to describe the fork-based workflow common on forges (such as GitHub and GitLab) where this felt "at home".Before you came, many users have used Git with these forges, so it might be just the matter of correct terminology to use to find what to read about. Does the keyword "triangular workflow" find what may help your way of working?
Oh, I'm familiar with it, I just didn't see a place which discussed it in the docs with respect to it as a *workflow*. The existing references are about the @{push}…selector (is there a name for these @{} suffixes as a collection?) and a note under "Future Work" in partial-clone. Neither of these seemed like relevant places to discuss how to set up remotes and tracking branches for the triangular workflow. I would expect it to be discussed in gitworkflows.txt, but I think such an addition is worthy of its own patchset rather than tacking it onto this.
Thanks,
--Ben
Hi Ben,
Le 2021-07-28 à 22:01, Ben Boeckel a écrit :
Quoted 8 lines
Hi,
I recently discovered some of the nicer behaviors of the
--trackoption for local branches (courtesy ofvim-fugitive's status rendering). However, after a few weeks of slowly working-t origin/masterinto my workflow, I figured that Git could help me out here.
Quoted 8 lines
This patch adds two new configuration variables to initialize the
branch.<name>.*settings for tracking remote branches.I searched the docs (including
Documentation/gitworkflows.txt), but didn't see anywhere to describe the fork-based workflow common on forges (such as GitHub and GitLab) where this felt "at home". I suppose I could describe the workflow I'm used to, but I think I'll hammer that out as blog posts before submitting it as documentation.
I'm in favor of a change like the one you propose, thanks for working on this!
The 'triangular' aka 'forking' workflow is, as you discovered, only explicitely mentioned in the description of '@{push}' [1]. 'gitworkflows(5)' is mostly about how the workflow used by the Git projet itself (from the description):
This document attempts to write down and motivate some of the workflow elements used for git.git itself.
Quoted 5 lines
I suspect there are more tests that should be added.
Thanks,
Quoted 9 lines
--Ben
---
v1 -> v2:
- removedbranch.defaultPushRemote(remote.pushDefaultcovers this case already)
- improved the commit message with more background and an expanation of the intended uses
Small nit: usually when sending a second version of a patch, you would use the '-v2' argument to 'git format-patch' so that the patch and cover letter is prefixed [PATCH v2].
Quoted 1 line · Philippe Blain
I'm in favor of a change like the one you propose, thanks for working on this!
Thanks :) . Nice to know it'll be of use for others.
Quoted 6 lines
The 'triangular' aka 'forking' workflow is, as you discovered, only explicitely mentioned in the description of '@{push}' [1]. 'gitworkflows(5)' is mostly about how the workflow used by the Git projet itself (from the description):
This document attempts to write down and motivate some of the workflow elements used for git.git itself.
Ah, I missed that.
Quoted 11 lines
Le 2021-07-28 à 22:01, Ben Boeckel a écrit :
Quoted 6 lines
v1 -> v2:
- removedbranch.defaultPushRemote(remote.pushDefaultcovers this case already)
- improved the commit message with more background and an expanation of the intended usesSmall nit: usually when sending a second version of a patch, you would use the '-v2' argument to 'git format-patch' so that the patch and cover letter is prefixed [PATCH v2].
Yes, I realized that I had forgotten the --reroll-count= argument when making this patch (I suppose a way to store the Cc list for a topic somewhere would be nice so I didn't lean so heavily on shell history would help this).
FWIW, my main gripe with the email-based workflow is the lack of coordinated metadata (LWN has numerous comments by me about my views if you're curious, but I should really formalize them into blog posts). But when in Rome :) .
Thanks,
--Ben
Hi again,
Le 2021-07-30 à 09:57, Ben Boeckel a écrit :
Quoted 11 lines · Philippe Blain
Quoted 5 lines
Le 2021-07-28 à 22:01, Ben Boeckel a écrit :
Small nit: usually when sending a second version of a patch, you would use the '-v2' argument to 'git format-patch' so that the patch and cover letter is prefixed [PATCH v2].
Yes, I realized that I had forgotten the
--reroll-count=argument when making this patch (I suppose a way to store the Cc list for a topic somewhere would be nice so I didn't lean so heavily on shell history would help this).
There is 'format.cc', but it's not branch-specific, so you would have to use one worktree per branch with extension.worktreeConfig...
Quoted 6 lines
FWIW, my main gripe with the email-based workflow is the lack of coordinated metadata (LWN has numerous comments by me about my views if you're curious, but I should really formalize them into blog posts). But when in Rome :) .
I agree. I almost always use Gitgitgadget [1], which keeps track of the CC list for me, of updating the re-roll count, of adding the in-reply-to header such that subsequent versions of the series are sent as a response to the cover letter of the previous version, generating a range-diff against the previous version,
commenting on the PR when the series is mentioned in "What's cooking", etc.
Some things it does not support are: sending a patch as a response to some random mail on the list, which is sometimes useful, reading the commit notes to generate in-patch commentaries [2], customizing the diff generated by 'format-patch'. Other things are listed at [3].
Recently I've even been using only the terminal with Gitgitgadget:
I use 'git branch --edit-description'
to write my cover letter, and then use the 'gh' GitHub CLI to open my PR:
$ git config --get-regexp alias.desc* alias.desc-title !git config branch.$(git branch --show-current).description | head -1 alias.desc-body !git config branch.$(git branch --show-current).description | tail -n+3 $ gh pr create --title "$(git desc-title)" --body "$(git desc-body)" --head phil-blain:$(git branch --show-current)
Cheers,
Philippe.
[1] https://gitgitgadget.github.io/
[2] https://github.com/gitgitgadget/gitgitgadget/issues/173
[3] https://github.com/gitgitgadget/gitgitgadget/issues
Quoted 10 lines · Philippe Blain
Hi again,
Le 2021-07-30 à 09:57, Ben Boeckel a écrit :
Quoted 7 lines · Philippe Blain
Quoted 5 lines
Le 2021-07-28 à 22:01, Ben Boeckel a écrit :
Small nit: usually when sending a second version of a patch, you would use the '-v2' argument to 'git format-patch' so that the patch and cover letter is prefixed [PATCH v2].
Quoted 7 lines
Quoted 4 lines
Yes, I realized that I had forgotten the
--reroll-count=argument when making this patch (I suppose a way to store the Cc list for a topic somewhere would be nice so I didn't lean so heavily on shell history would help this).There is 'format.cc', but it's not branch-specific, so you would have to use one worktree per branch with extension.worktreeConfig...
I suppose a branch.<name>.cc configuration might be in order :) . Though at that point, branch.<name>.rerollCount and branch.<name>.sendEmailTo also make sense…
More brainstorming below too.
Quoted 10 lines
Quoted 4 lines
FWIW, my main gripe with the email-based workflow is the lack of coordinated metadata (LWN has numerous comments by me about my views if you're curious, but I should really formalize them into blog posts). But when in Rome :) .
I agree. I almost always use Gitgitgadget [1], which keeps track of the CC list for me, of updating the re-roll count, of adding the in-reply-to header such that subsequent versions of the series are sent as a response to the cover letter of the previous version, generating a range-diff against the previous version,
commenting on the PR when the series is mentioned in "What's cooking", etc.
That's nifty. I guess since I started here, things are a bit messy for this patch though?
Quoted 8 lines
Some things it does not support are: sending a patch as a response to some random mail on the list, which is sometimes useful, reading the commit notes to generate in-patch commentaries [2], customizing the diff generated by 'format-patch'. Other things are listed at [3].
Recently I've even been using only the terminal with Gitgitgadget:
I use 'git branch --edit-description'
to write my cover letter, and then use the 'gh' GitHub CLI to open my PR:
I think having branch.<name>.coverLetter and/or branch.coverLetterDirectory (defaulting to reading <name> or <name>.txt) to store the cover letter contents would be nice. I know I've blown away enough 0000-*.patch edits with an ill-timed git format-patch before…
Forges could use this to hook in with their push options[1] through their wrappers or other tools.
--Ben
[1]https://docs.gitlab.com/ee/user/project/push_options.html#push-options-for-merge-requests
Hi Philippe,
Quoted 11 lines · Philippe Blain
Recently I've even been using only the terminal with Gitgitgadget:
I use 'git branch --edit-description'
to write my cover letter, and then use the 'gh' GitHub CLI to open my PR:$ git config --get-regexp alias.desc* alias.desc-title !git config branch.$(git branch --show-current).description | head -1 alias.desc-body !git config branch.$(git branch --show-current).description | tail -n+3 $ gh pr create --title "$(git desc-title)" --body "$(git desc-body)" --head phil-blain:$(git branch --show-current)
I bet you could streamline this even further by defining a gh alias:
https://cli.github.com/manual/gh_alias_set
Ciao,
Dscho