gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats
Subsystems (6)
Sasha Levin
maintainerPATCH 1/14 gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats
From: Krzysztof Hałasa <[email protected]>
[ Upstream commit 7cca7c8096e2c8a4149405438329b5035d0744f0 ]
Video captured in 1400x1050 resolution (bytesperline aka stride = 1408 bytes) is invalid. Fix it.
--- drivers/gpu/ipu-v3/ipu-cpmem.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)
drivers/gpu/ipu-v3/ipu-cpmem.c +15 -15
@@ -585,21 +585,21 @@ static const struct ipu_rgb def_bgra_16 = { .bits_per_pixel = 16, }; -#define Y_OFFSET (pix, x, y) ((x) + pix->width * (y)) -#define U_OFFSET (pix, x, y) ((pix->width * pix->height) + \ - (pix->width * ((y) / 2) / 2) + (x) / 2) -#define V_OFFSET (pix, x, y) ((pix->width * pix->height) + \ - (pix->width * pix->height / 4) + \ - (pix->width * ((y) / 2) / 2) + (x) / 2) -#define U2_OFFSET (pix, x, y) ((pix->width * pix->height) + \ - (pix->width * (y) / 2) + (x) / 2) -#define V2_OFFSET (pix, x, y) ((pix->width * pix->height) + \ - (pix->width * pix->height / 2) + \ - (pix->width * (y) / 2) + (x) / 2) -#define UV_OFFSET (pix, x, y) ((pix->width * pix->height) + \ - (pix->width * ((y) / 2)) + (x)) -#define UV2_OFFSET (pix, x, y) ((pix->width * pix->height) + \ - (pix->width * y) + (x)) +#define Y_OFFSET (pix, x, y) ((x) + pix->bytesperline * (y)) +#define U_OFFSET (pix, x, y) ((pix->bytesperline * pix->height) + \ + (pix->bytesperline * ((y) / 2) / 2) + (x) / 2) +#define V_OFFSET (pix, x, y) ((pix->bytesperline * pix->height) + \ + (pix->bytesperline * pix->height / 4) + \ + (pix->bytesperline * ((y) / 2) / 2) + (x) / 2) +#define U2_OFFSET (pix, x, y) ((pix->bytesperline * pix->height) + \ + (pix->bytesperline * (y) / 2) + (x) / 2) +#define V2_OFFSET (pix, x, y) ((pix->bytesperline * pix->height) + \ + (pix->bytesperline * pix->height / 2) + \ + (pix->bytesperline * (y) / 2) + (x) / 2) +#define UV_OFFSET (pix, x, y) ((pix->bytesperline * pix->height) + \ + (pix->bytesperline * ((y) / 2)) + (x)) +#define UV2_OFFSET (pix, x, y) ((pix->bytesperline * pix->height) + \ + (pix->bytesperline * y) + (x))#define NUM_ALPHA_CHANNELS 7
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 2/14 reset: reset-zynqmp: Fixed the argument data type
From: Sai Krishna Potthuri <[email protected]>
[ Upstream commit ed104ca4bd9c405b41e968ad4ece51f6462e90b6 ]
This patch changes the data type of the variable 'val' from int to u32.
Addresses-Coverity: argument of type "int *" is incompatible with parameter of type "u32 *"
--- drivers/reset/reset-zynqmp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/reset/reset-zynqmp.c +2 -1
@@ -53,7 +53,8 @@ static int zynqmp_reset_status(struct reset_controller_dev *rcdev, unsigned long id) {struct zynqmp_reset_data *priv =to_zynqmp_reset_data (rcdev); -int val, err; +int err; +u32 val; err =zynqmp_pm_reset_get_status (priv->data->reset_id + id, &val);if (err)
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 3/14 qed: Fix the VF msix vectors flow
In reply to Sasha LevinFrom: Shai Malin <[email protected]>
[ Upstream commit b0cd08537db8d2fbb227cdb2e5835209db295a24 ]
For VFs we should return with an error in case we didn't get the exact number of msix vectors as we requested.
Not doing that will lead to a crash when starting queues for this VF.
--- drivers/net/ethernet/qlogic/qed/qed_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/net/ethernet/qlogic/qed/qed_main.c +6 -1
@@ -616,7 +616,12 @@ static int qed_enable_msix(struct qed_dev *cdev, rc = cnt; } -if (rc >0 ) { +/* For VFs, we should return with an error in case we didn't get the +* exact number of msix vectors as we requested. +* Not doing that will lead to a crash when starting queues for +* this VF. +*/ +if ((IS_PF (cdev) && rc >0 ) || (IS_VF (cdev) && rc == cnt)) {/* MSI-x configuration was achieved */ int_params->out.int_mode =QED_INT_MODE_MSIX ; int_params->out.num_vectors = rc;
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 4/14 net: dsa: mv88e6xxx: Update mv88e6393x serdes errata
In reply to Sasha LevinFrom: Nathan Rossi <[email protected]>
[ Upstream commit 3b0720ba00a7413997ad331838d22c81f252556a ]
In early erratas this issue only covered port 0 when changing from [x]MII (rev A 3.6). In subsequent errata versions this errata changed to cover the additional "Hardware reset in CPU managed mode" condition, and removed the note specifying that it only applied to port 0.
In designs where the device is configured with CPU managed mode (CPU_MGD), on reset all SERDES ports (p0, p9, p10) have a stuck power down bit and require this initial power up procedure. As such apply this errata to all three SERDES ports of the mv88e6393x.
--- drivers/net/dsa/mv88e6xxx/serdes.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/net/dsa/mv88e6xxx/serdes.c +6 -5
@@ -1277,15 +1277,16 @@ static int mv88e6393x_serdes_port_errata(struct mv88e6xxx_chip *chip, int lane)int err;/* mv88e6393x family errata 4.6: -* Cannot clear PwrDn bit on SERDES on port 0 if device is configured -* CPU_MGD mode or P0_mode is configured for [x]MII. -* Workaround: Set Port0 SERDES register 4.F002 bit 5=0 and bit 15=1. +* Cannot clear PwrDn bit on SERDES if device is configured CPU_MGD +* mode or P0_mode is configured for [x]MII. +* Workaround: Set SERDES register 4.F002 bit 5=0 and bit 15=1. * * It seems that after this workaround the SERDES is automatically * powered up (the bit is cleared), so power it down. */ -if (lane ==MV88E6393X_PORT0_LANE ) { - err =mv88e6390_serdes_read (chip,MV88E6393X_PORT0_LANE , +if (lane ==MV88E6393X_PORT0_LANE || lane ==MV88E6393X_PORT9_LANE || + lane ==MV88E6393X_PORT10_LANE ) { + err =mv88e6390_serdes_read (chip, lane,MDIO_MMD_PHYXS ,MV88E6393X_SERDES_POC , ®);if (err)
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 5/14 riscv: dts: microchip: Use 'local-mac-address' for emac1
In reply to Sasha LevinFrom: Bin Meng <[email protected]>
[ Upstream commit 719588dee26bac0d5979c122bc530c43dc5d07c7 ]
Per the DT spec, 'local-mac-address' is used to specify MAC address that was assigned to the network device, while 'mac-address' is used to specify the MAC address that was last used by the boot program, and shall be used only if the value differs from 'local-mac-address' property value.
--- arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +1 -1
@@ -317,7 +317,7 @@ emac1: ethernet@20112000 { reg = <0x0 0x20112000 0x0 0x2000>; interrupt-parent = <&plic>; interrupts = <70 71 72 73>; - mac-address = [00 00 00 00 00 00]; + local-mac-address = [00 00 00 00 00 00]; clocks = <&clkcfg 5>, <&clkcfg 2>; status = "disabled"; clock-names = "pclk", "hclk";
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 6/14 riscv: dts: microchip: Add ethernet0 to the aliases node
In reply to Sasha LevinFrom: Bin Meng <[email protected]>
[ Upstream commit 417166ddec020c4e969aea064e23822591ad54df ]
U-Boot expects this alias to be in place in order to fix up the mac address of the ethernet node.
Note on the Icicle Kit board, currently only emac1 is enabled so it becomes the 'ethernet0'.
--- arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts +4 -0
@@ -14,6 +14,10 @@ / { model = "Microchip PolarFire-SoC Icicle Kit"; compatible = "microchip,mpfs-icicle-kit"; + aliases { + ethernet0 = &emac1; + }; + chosen { stdout-path = &serial0; };
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 7/14 net: macb: Add a NULL check on desc_ptp
In reply to Sasha LevinFrom: Harini Katakam <[email protected]>
[ Upstream commit 85520079afce885b80647fbd0d13d8f03d057167 ]
macb_ptp_desc will not return NULL under most circumstances with correct Kconfig and IP design config register. But for the sake of the extreme corner case, check for NULL when using the helper. In case of rx_tstamp, no action is necessary except to return (similar to timestamp disabled) and warn. In case of TX, return -EINVAL to let the skb be free. Perform this check before marking skb in progress.
Fixes coverity warning:
(4) Event dereference:
Dereferencing a null pointer "desc_ptp"
--- drivers/net/ethernet/cadence/macb_ptp.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/net/ethernet/cadence/macb_ptp.c +10 -1
@@ -275,6 +275,12 @@ void gem_ptp_rxstamp(struct macb *bp, struct sk_buff *skb,if (GEM_BFEXT (DMA_RXVALID , desc->addr)) { desc_ptp =macb_ptp_desc (bp, desc); +/* Unlikely but check */ +if (!desc_ptp) { +dev_warn_ratelimited (&bp->pdev->dev, +"Timestamp not supported in BD\n" ); +return ; + }gem_hw_timestamp (bp, desc_ptp->ts_1, desc_ptp->ts_2, &ts);memset (shhwtstamps,0 ,sizeof (struct skb_shared_hwtstamps )); shhwtstamps->hwtstamp =ktime_set (ts.tv_sec, ts.tv_nsec);
@@ -307,8 +313,11 @@ int gem_ptp_txstamp(struct macb_queue *queue, struct sk_buff *skb,if (CIRC_SPACE (head, tail,PTP_TS_BUFFER_SIZE ) ==0 )return -ENOMEM ; -skb_shinfo (skb)->tx_flags |=SKBTX_IN_PROGRESS ; desc_ptp =macb_ptp_desc (queue->bp, desc); +/* Unlikely but check */ +if (!desc_ptp) +return -EINVAL ; +skb_shinfo (skb)->tx_flags |=SKBTX_IN_PROGRESS ; tx_timestamp = &queue->tx_timestamps[head]; tx_timestamp->skb = skb;/* ensure ts_1/ts_2 is loaded after ctrl (TX_USED check) */
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 8/14 qede: Fix memset corruption
In reply to Sasha LevinFrom: Shai Malin <[email protected]>
[ Upstream commit e543468869e2532f5d7926e8f417782b48eca3dc ]
Thanks to Kees Cook who detected the problem of memset that starting from not the first member, but sized for the whole struct. The better change will be to remove the redundant memset and to clear only the msix_cnt member.
--- drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/qlogic/qede/qede_main.c +1 -1
@@ -1874,6 +1874,7 @@ static void qede_sync_free_irqs(struct qede_dev *edev) } edev->int_info.used_cnt =0 ; + edev->int_info.msix_cnt =0 ; }static int qede_req_msix_irqs (struct qede_dev *edev)
@@ -2427,7 +2428,6 @@ static int qede_load(struct qede_dev *edev, enum qede_load_mode mode, goto out; err4:qede_sync_free_irqs (edev); -memset (&edev->int_info.msix_cnt,0 ,sizeof (struct qed_int_info )); err3:qede_napi_disable_remove (edev); err2:
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 9/14 perf/x86/intel/pt: Fix mask of num_address_ranges
In reply to Sasha LevinFrom: Xiaoyao Li <[email protected]>
[ Upstream commit c53c6b7409f4cd9e542991b53d597fbe2751d7db ]
Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of configurable address ranges for filtering, not bit 1:0.
--- arch/x86/events/intel/pt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/events/intel/pt.c +1 -1
@@ -62,7 +62,7 @@ static struct pt_cap_desc {PT_CAP (single_range_output,0 ,CPUID_ECX ,BIT (2 )),PT_CAP (output_subsys,0 ,CPUID_ECX ,BIT (3 )),PT_CAP (payloads_lip,0 ,CPUID_ECX ,BIT (31 )), -PT_CAP (num_address_ranges,1 ,CPUID_EAX ,0x3 ), +PT_CAP (num_address_ranges,1 ,CPUID_EAX ,0x7 ),PT_CAP (mtc_periods,1 ,CPUID_EAX ,0xffff0000 ),PT_CAP (cycle_thresholds,1 ,CPUID_EBX ,0xffff ), PT_CAP(psb_periods, 1, CPUID_EBX, 0xffff0000),
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 10/14 ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()
In reply to Sasha LevinFrom: Tuo Li <[email protected]>
[ Upstream commit a9e6ffbc5b7324b6639ee89028908b1e91ceed51 ]
kcalloc() is called to allocate memory for m->m_info, and if it fails, ceph_mdsmap_destroy() behind the label out_err will be called:
ceph_mdsmap_destroy(m);
In ceph_mdsmap_destroy(), m->m_info is dereferenced through:
kfree(m->m_info[i].export_targets);
To fix this possible null-pointer dereference, check m->m_info before the for loop to free m->m_info[i].export_targets.
[ jlayton: fix up whitespace damage
only kfree(m->m_info) if it's non-NULL ]
--- fs/ceph/mdsmap.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
fs/ceph/mdsmap.c +5 -3
@@ -394,9 +394,11 @@ void ceph_mdsmap_destroy(struct ceph_mdsmap *m) {int i; -for (i =0 ; i < m->possible_max_rank; i++) -kfree (m->m_info[i].export_targets); -kfree (m->m_info); +if (m->m_info) { +for (i =0 ; i < m->possible_max_rank; i++) +kfree (m->m_info[i].export_targets); +kfree (m->m_info); + }kfree (m->m_data_pg_pools);kfree (m); }
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 11/14 perf/x86/amd/ibs: Work around erratum #1197
In reply to Sasha LevinFrom: Kim Phillips <[email protected]>
[ Upstream commit 26db2e0c51fe83e1dd852c1321407835b481806e ]
Erratum #1197 "IBS (Instruction Based Sampling) Register State May be Incorrect After Restore From CC6" is published in a document:
"Revision Guide for AMD Family 19h Models 00h-0Fh Processors" 56683 Rev. 1.04 July 2021
https://bugzilla.kernel.org/show_bug.cgi?id=206537
Implement the erratum's suggested workaround and ignore IBS samples if MSRC001_1031 == 0.
--- arch/x86/events/amd/ibs.c | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/x86/events/amd/ibs.c +8 -0
@@ -90,6 +90,7 @@ struct perf_ibs {unsigned long offset_mask[1 ];int offset_max; unsigned int fetch_count_reset_broken : 1; + unsigned int fetch_ignore_if_zero_rip : 1;struct cpu_perf_ibs __percpu *pcpu;struct attribute **format_attrs;
@@ -672,6 +673,10 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs)if (check_rip && (ibs_data.regs[2 ] &IBS_RIP_INVALID )) { regs.flags &= ~PERF_EFLAGS_EXACT ; }else { +/* Workaround for erratum #1197 */ +if (perf_ibs->fetch_ignore_if_zero_rip && !(ibs_data.regs[1 ])) + goto out; +set_linear_ip (®s, ibs_data.regs[1 ]); regs.flags |=PERF_EFLAGS_EXACT ; }
@@ -769,6 +774,9 @@ static __init void perf_event_ibs_init(void)if (boot_cpu_data.x86 >=0x16 && boot_cpu_data.x86 <=0x18 ) perf_ibs_fetch.fetch_count_reset_broken =1 ; +if (boot_cpu_data.x86 ==0x19 && boot_cpu_data.x86_model <0x10 ) + perf_ibs_fetch.fetch_ignore_if_zero_rip =1 ; +perf_ibs_pmu_init (&perf_ibs_fetch,"ibs_fetch" );if (ibs_caps &IBS_CAPS_OPCNT ) {
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 12/14 perf/x86/amd/power: Assign pmu.module
In reply to Sasha LevinFrom: Kim Phillips <[email protected]>
[ Upstream commit ccf26483416a339c114409f6e7cd02abdeaf8052 ]
Assign pmu.module so the driver can't be unloaded whilst in use.
--- arch/x86/events/amd/power.c | 1 + 1 file changed, 1 insertion(+)
arch/x86/events/amd/power.c +1 -0
@@ -213,6 +213,7 @@ static struct pmu pmu_class = { .stop = pmu_event_stop, .read = pmu_event_read, .capabilities = PERF_PMU_CAP_NO_EXCLUDE, + .module = THIS_MODULE, };static int power_cpu_exit (unsigned int cpu)
Signature · 1 line
2.30.2
Sasha Levin
maintainerPATCH 13/14 net: fix NULL pointer reference in cipso_v4_doi_free
In reply to Sasha LevinFrom: 王贇 <[email protected]>
[ Upstream commit 733c99ee8be9a1410287cdbb943887365e83b2d6 ]
In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc failed, we sometime observe panic:
BUG: kernel NULL pointer dereference, address: ... RIP: 0010:cipso_v4_doi_free+0x3a/0x80 ... Call Trace: netlbl_cipsov4_add_std+0xf4/0x8c0 netlbl_cipsov4_add+0x13f/0x1b0 genl_family_rcv_msg_doit.isra.15+0x132/0x170 genl_rcv_msg+0x125/0x240
This is because in cipso_v4_doi_free() there is no check on 'doi_def->map.std' when 'doi_def->type' equal 1, which is possibe, since netlbl_cipsov4_add_std() haven't initialize it before alloc 'doi_def->map.std'.
This patch just add the check to prevent panic happen for similar cases.
--- net/ipv4/cipso_ipv4.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
net/ipv4/cipso_ipv4.c +10 -8
@@ -466,14 +466,16 @@ void cipso_v4_doi_free(struct cipso_v4_doi *doi_def)if (!doi_def)return ; -switch (doi_def->type) { -case CIPSO_V4_MAP_TRANS : -kfree (doi_def->map.std->lvl.cipso); -kfree (doi_def->map.std->lvl.local); -kfree (doi_def->map.std->cat.cipso); -kfree (doi_def->map.std->cat.local); -kfree (doi_def->map.std); -break ; +if (doi_def->map.std) { +switch (doi_def->type) { +case CIPSO_V4_MAP_TRANS : +kfree (doi_def->map.std->lvl.cipso); +kfree (doi_def->map.std->lvl.local); +kfree (doi_def->map.std->cat.cipso); +kfree (doi_def->map.std->cat.local); +kfree (doi_def->map.std); +break ; + } }kfree (doi_def); }
Signature · 1 line
2.30.2
Re: [PATCH AUTOSEL 5.13 13/14] net: fix NULL pointer reference in cipso_v4_doi_free
Quoted 5 lines · Sasha Levin
From: 王贇 <[email protected]>
[ Upstream commit
733c99ee8be9a1410287cdbb943887365e83b2d6]
Hi Sasha,
Michael Wang has sent a v2 patch [1] for this bug and it is merged into netdev/net-next.git. However, the v1 patch is already in the upstream tree.
How do you guys handle such a issue?
[1] https://lkml.org/lkml/2021/8/30/229
Quoted 61 lines
In
netlbl_cipsov4_add_std()when 'doi_def->map.std' alloc failed, we sometime observe panic:BUG: kernel NULL pointer dereference, address: ... RIP: 0010:cipso_v4_doi_free+0x3a/0x80 ... Call Trace: netlbl_cipsov4_add_std+0xf4/0x8c0 netlbl_cipsov4_add+0x13f/0x1b0 genl_family_rcv_msg_doit.isra.15+0x132/0x170 genl_rcv_msg+0x125/0x240This is because in
cipso_v4_doi_free()there is no check on 'doi_def->map.std' when 'doi_def->type' equal 1, which is possibe, sincenetlbl_cipsov4_add_std()haven't initialize it before alloc 'doi_def->map.std'.This patch just add the check to prevent panic happen for similar cases.
Reported-by Abaci <[email protected]>Signed-off-by Michael Wang <[email protected]>Signed-off-by David S. Miller <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- net/ipv4/cipso_ipv4.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)net/ipv4/cipso_ipv4.c +10
-9@@ -466,14 +466,16 @@ void cipso_v4_doi_free(struct cipso_v4_doi *doi_def)if (!doi_def)return ; -switch (doi_def->type) { -case CIPSO_V4_MAP_TRANS : -kfree (doi_def->map.std->lvl.cipso); -kfree (doi_def->map.std->lvl.local); -kfree (doi_def->map.std->cat.cipso); -kfree (doi_def->map.std->cat.local); -kfree (doi_def->map.std); -break ; +if (doi_def->map.std) { +switch (doi_def->type) { +case CIPSO_V4_MAP_TRANS : +kfree (doi_def->map.std->lvl.cipso); +kfree (doi_def->map.std->lvl.local); +kfree (doi_def->map.std->cat.cipso); +kfree (doi_def->map.std->cat.local); +kfree (doi_def->map.std); +break ; + } }kfree (doi_def); } --2.30.2
Paul Moore
maintainerRe: [PATCH AUTOSEL 5.13 13/14] net: fix NULL pointer reference in cipso_v4_doi_free
Quoted 10 lines · Dongliang Mu
Quoted 5 lines · Sasha Levin
From: 王贇 <[email protected]>
[ Upstream commit
733c99ee8be9a1410287cdbb943887365e83b2d6]Hi Sasha,
Quoted 7 lines
Michael Wang has sent a v2 patch [1] for this bug and it is merged into netdev/net-next.git. However, the v1 patch is already in the upstream tree.
How do you guys handle such a issue?
Ugh. Michael can you please work with netdev to fix this in the upstream, and hopefully -stable, kernels? My guess is you will need to rebase your v2 patch on top of the v1 patch (basically what exists in upstream) and send that back out.
Signature · 2 lines
paul moore www.paul-moore.com
Sasha Levin
maintainerRe: [PATCH AUTOSEL 5.13 13/14] net: fix NULL pointer reference in cipso_v4_doi_free
Quoted 15 lines · Paul Moore
Quoted 14 lines · Dongliang Mu
Quoted 5 lines · Sasha Levin
From: 王贇 <[email protected]>
[ Upstream commit
733c99ee8be9a1410287cdbb943887365e83b2d6]Hi Sasha,
Michael Wang has sent a v2 patch [1] for this bug and it is merged into netdev/net-next.git. However, the v1 patch is already in the upstream tree.
Quoted 8 lines
Quoted 3 lines
How do you guys handle such a issue?
Ugh. Michael can you please work with netdev to fix this in the upstream, and hopefully -stable, kernels? My guess is you will need to rebase your v2 patch on top of the v1 patch (basically what exists in upstream) and send that back out.
I'm just going to drop this one for now (it never made it in). If there is a follow-up you do want us to queue please let us know :)
Signature · 2 lines
Thanks, Sasha
Paul Moore
maintainerRe: [PATCH AUTOSEL 5.13 13/14] net: fix NULL pointer reference in cipso_v4_doi_free
Quoted 20 lines · Sasha Levin
Quoted 19 lines · Paul Moore
Quoted 17 lines · Dongliang Mu
Quoted 5 lines · Sasha Levin
From: 王贇 <[email protected]>
[ Upstream commit
733c99ee8be9a1410287cdbb943887365e83b2d6]Hi Sasha,
Michael Wang has sent a v2 patch [1] for this bug and it is merged into netdev/net-next.git. However, the v1 patch is already in the upstream tree.
How do you guys handle such a issue?
Quoted 7 lines
Quoted 4 lines
Ugh. Michael can you please work with netdev to fix this in the upstream, and hopefully -stable, kernels? My guess is you will need to rebase your v2 patch on top of the v1 patch (basically what exists in upstream) and send that back out.
I'm just going to drop this one for now (it never made it in). If there is a follow-up you do want us to queue please let us know :)
Thanks Sasha. The lore link below is the v2 version of the patch and it is worth merging as a fix into the older kernels.
* https://lore.kernel.org/linux-security-module/[email protected]
Signature · 2 lines
paul moore www.paul-moore.com
Sasha Levin
maintainerPATCH 14/14 cryptoloop: add a deprecation warning
In reply to Sasha LevinFrom: Christoph Hellwig <[email protected]>
[ Upstream commit 222013f9ac30b9cec44301daa8dbd0aae38abffb ]
Support for cryptoloop has been officially marked broken and deprecated in favor of dm-crypt (which supports the same broken algorithms if needed) in Linux 2.6.4 (released in March 2004), and support for it has been entirely removed from losetup in util-linux 2.23 (released in April 2013). Add a warning and a deprecation schedule.
--- drivers/block/Kconfig | 4 ++-- drivers/block/cryptoloop.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-)
drivers/block/Kconfig +2 -2
@@ -213,7 +213,7 @@ config BLK_DEV_LOOP_MIN_COUNT dynamically allocated with the /dev/loop-control interface. config BLK_DEV_CRYPTOLOOP - tristate "Cryptoloop Support" + tristate "Cryptoloop Support (DEPRECATED)" select CRYPTO select CRYPTO_CBC depends on BLK_DEV_LOOP
@@ -225,7 +225,7 @@ config BLK_DEV_CRYPTOLOOP WARNING: This device is not safe for journaled file systems like ext3 or Reiserfs. Please use the Device Mapper crypto module instead, which can be configured to be on-disk compatible with the - cryptoloop device. + cryptoloop device. cryptoloop support will be removed in Linux 5.16. source "drivers/block/drbd/Kconfig"
drivers/block/cryptoloop.c +2 -0
@@ -189,6 +189,8 @@ init_cryptoloop(void)if (rc)printk (KERN_ERR "cryptoloop: loop_register_transfer failed\n" ); +else +pr_warn ("the cryptoloop driver has been deprecated and will be removed in in Linux 5.16\n" );return rc; }
Signature · 1 line
2.30.2