iio: adc: lpc18xx_adc: Convert probe to device managed version
Subsystems (2)
PATCH v2 1/1 iio: adc: lpc18xx_adc: Convert probe to device managed version
The remove function and the goto sections are not necessary if devm functions are used.
Convert device register to devm version. Add hook functions to release device resources, and use them inside probe with devm_add_action, which will release resources on driver detach.
To maintain the order of which device resources were released/reseted, register the hook functions as soon as resources are obtained/initialized. Since devres actions are called on driver detach, the remove function and the error-handling goto sections are no longer necessary.
---
Change log V1 -> V2:
-Renamed lpc18xx_clk_disable_unprepare function
-Removed platform_set_drvdata(pdev, indio_dev)
-Renamed lpc18xx_writel to lpc18xx_clear_cr_reg -devm_iio_device_register now returns directly in the end of probe function
drivers/iio/adc/lpc18xx_adc.c | 61 ++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 30 deletions(-)
drivers/iio/adc/lpc18xx_adc.c +31 -30
@@ -115,6 +115,23 @@ static const struct iio_info lpc18xx_adc_info = { .read_raw = lpc18xx_adc_read_raw, }; +static void lpc18xx_clear_cr_reg (void *data) +{ +struct lpc18xx_adc *adc = data; + +writel (0 , adc->base +LPC18XX_ADC_CR ); +} + +static void lpc18xx_clk_disable (void *clk) +{ +clk_disable_unprepare (clk); +} + +static void lpc18xx_regulator_disable (void *vref) +{ +regulator_disable (vref); +} +static int lpc18xx_adc_probe (struct platform_device *pdev) {struct iio_dev *indio_dev;
@@ -127,7 +144,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)if (!indio_dev)return -ENOMEM ; -platform_set_drvdata (pdev, indio_dev); adc =iio_priv (indio_dev); adc->dev = &pdev->dev;mutex_init (&adc->lock);
@@ -163,44 +179,30 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)return ret; } + ret =devm_add_action_or_reset (&pdev->dev, lpc18xx_regulator_disable, adc->vref); +if (ret) +return ret; + ret =clk_prepare_enable (adc->clk);if (ret) {dev_err (&pdev->dev,"unable to enable clock\n" ); - goto dis_reg; +return ret; } + ret =devm_add_action_or_reset (&pdev->dev, lpc18xx_clk_disable, + adc->clk); +if (ret) +return ret; + adc->cr_reg = (clkdiv <<LPC18XX_ADC_CR_CLKDIV_SHIFT ) |LPC18XX_ADC_CR_PDN ;writel (adc->cr_reg, adc->base +LPC18XX_ADC_CR ); - ret =iio_device_register (indio_dev); -if (ret) { -dev_err (&pdev->dev,"unable to register device\n" ); - goto dis_clk; - } - -return 0 ; - -dis_clk: -writel (0 , adc->base +LPC18XX_ADC_CR ); -clk_disable_unprepare (adc->clk); -dis_reg: -regulator_disable (adc->vref); -return ret; -} - -static int lpc18xx_adc_remove (struct platform_device *pdev) -{ -struct iio_dev *indio_dev =platform_get_drvdata (pdev); -struct lpc18xx_adc *adc =iio_priv (indio_dev); - -iio_device_unregister (indio_dev); - -writel (0 , adc->base +LPC18XX_ADC_CR ); -clk_disable_unprepare (adc->clk); -regulator_disable (adc->vref); + ret =devm_add_action_or_reset (&pdev->dev, lpc18xx_clear_cr_reg, adc); +if (ret) +return ret; -return 0 ; +return devm_iio_device_register (&pdev->dev, indio_dev); }static const struct of_device_id lpc18xx_adc_match[] = {
@@ -211,7 +213,6 @@ MODULE_DEVICE_TABLE(of, lpc18xx_adc_match);static struct platform_driver lpc18xx_adc_driver = { .probe = lpc18xx_adc_probe, - .remove = lpc18xx_adc_remove, .driver = { .name ="lpc18xx-adc" , .of_match_table = lpc18xx_adc_match,
Signature · 1 line
2.33.0
Jonathan Cameron
maintainerQuoted 7 lines · On Fri, 15 Oct 2021 15:47:12 -0300 André Gustavo Nakagomi Lopez…
The remove function and the goto sections are not necessary if devm functions are used.
Convert device register to devm version. Add hook functions to release device resources, and use them inside probe with
devm_add_action, which will release resources on driver detach.
Quoted 6 lines
To maintain the order of which device resources were released/reseted, register the hook functions as soon as resources are obtained/initialized. Since devres actions are called on driver detach, the remove function and the error-handling goto sections are no longer necessary.
Signed-off-by André Gustavo Nakagomi Lopez <[email protected]>
Hi André
Looks good to me, but I did notice an unrelated issue whilst looking at this driver. Comment on that inline. Follow up patch welcome!
Applied to the togreg branch of iio.git and pushed out as testing to let 0-day see if it can find anything we missed.
Thanks,
Jonathan
Quoted 48 lines
---
Change log V1 -> V2:
-Renamedlpc18xx_clk_disable_unpreparefunction
-Removedplatform_set_drvdata(pdev, indio_dev)
-Renamedlpc18xx_writeltolpc18xx_clear_cr_reg-devm_iio_device_register now returns directly in the end of probe functiondrivers/iio/adc/lpc18xx_adc.c | 61 ++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 30 deletions(-)drivers/iio/adc/lpc18xx_adc.c +17
-1@@ -115,6 +115,23 @@ static const struct iio_info lpc18xx_adc_info = { .read_raw = lpc18xx_adc_read_raw, }; +static void lpc18xx_clear_cr_reg (void *data) +{ +struct lpc18xx_adc *adc = data; + +writel (0 , adc->base +LPC18XX_ADC_CR ); +} + +static void lpc18xx_clk_disable (void *clk) +{ +clk_disable_unprepare (clk); +} + +static void lpc18xx_regulator_disable (void *vref) +{ +regulator_disable (vref); +} +static int lpc18xx_adc_probe (struct platform_device *pdev) {struct iio_dev *indio_dev;@@ -127,7 +144,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)if (!indio_dev)return -ENOMEM ; -platform_set_drvdata (pdev, indio_dev); adc =iio_priv (indio_dev); adc->dev = &pdev->dev;mutex_init (&adc->lock);@@ -163,44 +179,30 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)return ret; }
drivers/iio/adc/lpc18xx_adc.c static int lpc18xx_adc_probe(struct platform_device *pdev) · line 189
Quoted 10 lines
drivers/iio/adc/lpc18xx_adc.c +5
-1+ ret =devm_add_action_or_reset (&pdev->dev, lpc18xx_regulator_disable, adc->vref); +if (ret) +return ret; + ret =clk_prepare_enable (adc->clk);if (ret) {dev_err (&pdev->dev,"unable to enable clock\n" ); - goto dis_reg; +return ret;
Unrelated but clk_get_rate() as called before the clk_prepare_enable() is not guaranteed
to work. So a good follow up patch would reorder that to be after the clk is turned on.
Quoted 54 lines
drivers/iio/adc/lpc18xx_adc.c +9
-28} + ret =devm_add_action_or_reset (&pdev->dev, lpc18xx_clk_disable, + adc->clk); +if (ret) +return ret; + adc->cr_reg = (clkdiv <<LPC18XX_ADC_CR_CLKDIV_SHIFT ) |LPC18XX_ADC_CR_PDN ;writel (adc->cr_reg, adc->base +LPC18XX_ADC_CR ); - ret =iio_device_register (indio_dev); -if (ret) { -dev_err (&pdev->dev,"unable to register device\n" ); - goto dis_clk; - } - -return 0 ; - -dis_clk: -writel (0 , adc->base +LPC18XX_ADC_CR ); -clk_disable_unprepare (adc->clk); -dis_reg: -regulator_disable (adc->vref); -return ret; -} - -static int lpc18xx_adc_remove (struct platform_device *pdev) -{ -struct iio_dev *indio_dev =platform_get_drvdata (pdev); -struct lpc18xx_adc *adc =iio_priv (indio_dev); - -iio_device_unregister (indio_dev); - -writel (0 , adc->base +LPC18XX_ADC_CR ); -clk_disable_unprepare (adc->clk); -regulator_disable (adc->vref); + ret =devm_add_action_or_reset (&pdev->dev, lpc18xx_clear_cr_reg, adc); +if (ret) +return ret; -return 0 ; +return devm_iio_device_register (&pdev->dev, indio_dev); }static const struct of_device_id lpc18xx_adc_match[] = {@@ -211,7 +213,6 @@ MODULE_DEVICE_TABLE(of, lpc18xx_adc_match);static struct platform_driver lpc18xx_adc_driver = { .probe = lpc18xx_adc_probe, - .remove = lpc18xx_adc_remove, .driver = { .name ="lpc18xx-adc" , .of_match_table = lpc18xx_adc_match,
Quoted 142 lines · Jonathan Cameron
Quoted 7 lines · On Fri, 15 Oct 2021 15:47:12 -0300 André Gustavo Nakagomi Lopez…
The remove function and the goto sections are not necessary if devm functions are used.
Convert device register to devm version. Add hook functions to release device resources, and use them inside probe with
devm_add_action, which will release resources on driver detach.Quoted 6 lines
To maintain the order of which device resources were released/reseted, register the hook functions as soon as resources are obtained/initialized. Since devres actions are called on driver detach, the remove function and the error-handling goto sections are no longer necessary.
Signed-off-by André Gustavo Nakagomi Lopez <[email protected]>Hi André
Looks good to me, but I did notice an unrelated issue whilst looking at this driver. Comment on that inline. Follow up patch welcome!
Applied to the togreg branch of iio.git and pushed out as testing to let 0-day see if it can find anything we missed.
Thanks,
Jonathan
Quoted 48 lines
---
Change log V1 -> V2:
-Renamedlpc18xx_clk_disable_unpreparefunction
-Removedplatform_set_drvdata(pdev, indio_dev)
-Renamedlpc18xx_writeltolpc18xx_clear_cr_reg-devm_iio_device_register now returns directly in the end of probe functiondrivers/iio/adc/lpc18xx_adc.c | 61 ++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 30 deletions(-)drivers/iio/adc/lpc18xx_adc.c +17
-1@@ -115,6 +115,23 @@ static const struct iio_info lpc18xx_adc_info = { .read_raw = lpc18xx_adc_read_raw, }; +static void lpc18xx_clear_cr_reg (void *data) +{ +struct lpc18xx_adc *adc = data; + +writel (0 , adc->base +LPC18XX_ADC_CR ); +} + +static void lpc18xx_clk_disable (void *clk) +{ +clk_disable_unprepare (clk); +} + +static void lpc18xx_regulator_disable (void *vref) +{ +regulator_disable (vref); +} +static int lpc18xx_adc_probe (struct platform_device *pdev) {struct iio_dev *indio_dev;@@ -127,7 +144,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)if (!indio_dev)return -ENOMEM ; -platform_set_drvdata (pdev, indio_dev); adc =iio_priv (indio_dev); adc->dev = &pdev->dev;mutex_init (&adc->lock);@@ -163,44 +179,30 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)return ret; }drivers/iio/adc/lpc18xx_adc.c static int lpc18xx_adc_probe(struct platform_device *pdev) · line 189
Quoted 10 lines
drivers/iio/adc/lpc18xx_adc.c +5
-1+ ret =devm_add_action_or_reset (&pdev->dev, lpc18xx_regulator_disable, adc->vref); +if (ret) +return ret; + ret =clk_prepare_enable (adc->clk);if (ret) {dev_err (&pdev->dev,"unable to enable clock\n" ); - goto dis_reg; +return ret;Unrelated but
clk_get_rate()as called before theclk_prepare_enable()is not guaranteed
to work. So a good follow up patch would reorder that to be after the clk is turned on.Quoted 48 lines
drivers/iio/adc/lpc18xx_adc.c +9
-27} + ret =devm_add_action_or_reset (&pdev->dev, lpc18xx_clk_disable, + adc->clk); +if (ret) +return ret; + adc->cr_reg = (clkdiv <<LPC18XX_ADC_CR_CLKDIV_SHIFT ) |LPC18XX_ADC_CR_PDN ;writel (adc->cr_reg, adc->base +LPC18XX_ADC_CR ); - ret =iio_device_register (indio_dev); -if (ret) { -dev_err (&pdev->dev,"unable to register device\n" ); - goto dis_clk; - } - -return 0 ; - -dis_clk: -writel (0 , adc->base +LPC18XX_ADC_CR ); -clk_disable_unprepare (adc->clk); -dis_reg: -regulator_disable (adc->vref); -return ret; -} - -static int lpc18xx_adc_remove (struct platform_device *pdev) -{ -struct iio_dev *indio_dev =platform_get_drvdata (pdev); -struct lpc18xx_adc *adc =iio_priv (indio_dev); - -iio_device_unregister (indio_dev); - -writel (0 , adc->base +LPC18XX_ADC_CR ); -clk_disable_unprepare (adc->clk); -regulator_disable (adc->vref); + ret =devm_add_action_or_reset (&pdev->dev, lpc18xx_clear_cr_reg, adc); +if (ret) +return ret; -return 0 ; +return devm_iio_device_register (&pdev->dev, indio_dev); }static const struct of_device_id lpc18xx_adc_match[] = {@@ -211,7 +213,6 @@ MODULE_DEVICE_TABLE(of, lpc18xx_adc_match);
Quoted 7 lines
drivers/iio/adc/lpc18xx_adc.c MODULE_DEVICE_TABLE(of, lpc18xx_adc_match); · line 218
Quoted 6 lines
drivers/iio/adc/lpc18xx_adc.c +0
-1static struct platform_driver lpc18xx_adc_driver = { .probe = lpc18xx_adc_probe, - .remove = lpc18xx_adc_remove, .driver = { .name ="lpc18xx-adc" , .of_match_table = lpc18xx_adc_match,
Ok. Thank you for the review, I will work on the change.