Skip to contentSkip to conversation

backlight: lp855x: Switch to atomic PWM API

PATCH In review Maíra Canal 3 participants 3 messages Nov 4, 2021 – Nov 5, 2021

Subsystems (3)
Framebuffer layer PWM Backlight class/subsystem
lore
Share & tools
lore

Maíra Canal

author
#0 lore raw

PATCH v6 1/1 backlight: lp855x: Switch to atomic PWM API

Remove legacy PWM interface (pwm_config, pwm_enable, pwm_disable) and replace it for the atomic PWM API.

Signed-off-by Maíra Canal <[email protected]>

---
V1 -> V2: Initialize variable and simplify conditional loop V2 -> V3: Fix assignment of NULL variable
V3 -> V4: Replace division for pwm_set_relative_duty_cycle
V4 -> V5: Fix overwrite of state.period
V5 -> V6: Fix duty cycle rounding and set period outside conditional loop

---
 drivers/video/backlight/lp855x_bl.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)
drivers/video/backlight/lp855x_bl.c +9 -12
index e94932c69f54..8f893cf0cfde 100644
@@ -233,9 +233,8 @@ static int lp855x_configure(struct lp855x *lp)
 
 static void lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br)
 {
-	unsigned int period = lp->pdata->period_ns;
-	unsigned int duty = br * period / max_br;
 	struct pwm_device *pwm;
+	struct pwm_state state;
 
 	/* request pwm device with the consumer name */
 	if (!lp->pwm) {

@@ -245,18 +244,16 @@ static void lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br)
 
 		lp->pwm = pwm;
 
-		/*
-		 * FIXME: pwm_apply_args() should be removed when switching to
-		 * the atomic PWM API.
-		 */
-		pwm_apply_args(pwm);
+		pwm_init_state(lp->pwm, &state);
+	} else {
+		pwm_get_state(lp->pwm, &state);
 	}
 
-	pwm_config(lp->pwm, duty, period);
-	if (duty)
-		pwm_enable(lp->pwm);
-	else
-		pwm_disable(lp->pwm);
+	state.period = lp->pdata->period_ns;
+	state.duty_cycle = div_u64(br * state.period, max_br);
+	state.enabled = state.duty_cycle;
+
+	pwm_apply_state(lp->pwm, &state);
 }
 
 static int lp855x_bl_update_status(struct backlight_device *bl)
Signature · 1 line
2.31.1