dt-bindings: sound: wlf,wm8903: Convert txt bindings to yaml
Subsystems (3)
PATCH v2 1/1 dt-bindings: sound: wlf,wm8903: Convert txt bindings to yaml
Convert the Wolfson WM8903 Ultra-Low Power Stereo CODEC Device Tree binding documentation to json-schema.
--- .../devicetree/bindings/sound/wlf,wm8903.yaml | 116 ++++++++++++++++++ .../devicetree/bindings/sound/wm8903.txt | 82 ------------- 2 files changed, 116 insertions(+), 82 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8903.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8903.txt
Documentation/devicetree/bindings/sound/wlf,wm8903.yaml new file +116 -0
@@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: WM8903 audio codec + +description: | + This device supports I2C only. + Pins on the device (for linking into audio routes): + * IN1L + * IN1R + * IN2L + * IN2R + * IN3L + * IN3R + * DMICDAT + * HPOUTL + * HPOUTR + * LINEOUTL + * LINEOUTR + * LOP + * LON + * ROP + * RON + * MICBIAS + +maintainers: + - [email protected] + +properties: + compatible: + const: wlf,wm8903 + + reg: + maxItems: 1 + + gpio-controller: true + '#gpio-cells': + const: 2 + + interrupts: + maxItems: 1 + + micdet-cfg: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: Default register value for R6 (Mic Bias). + + micdet-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 100 + description: The debounce delay for microphone detection in mS. + + gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + minItems: 5 + maxItems: 5 + A list of GPIO configuration register values. + If absent, no configuration of these registers is performed. + If any entry has the value 0xffffffff, that GPIO's + configuration will not be modified. + + AVDD-supply: + description: Analog power supply regulator on the AVDD pin. + + CPVDD-supply: + description: Charge pump supply regulator on the CPVDD pin. + + DBVDD-supply: + description: Digital buffer supply regulator for the DBVDD pin. + + DCVDD-supply: + description: Digital core supply regulator for the DCVDD pin. + + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + wm8903: codec@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupts = <347>; + + AVDD-supply = <&fooreg_a>; + CPVDD-supply = <&fooreg_b>; + DBVDD-supply = <&fooreg_c>; + DCVDD-supply = <&fooreg_d>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = < + 0x0600 /* DMIC_LR, output */ + 0x0680 /* DMIC_DAT, input */ + 0x0000 /* GPIO, output, low */ + 0x0200 /* Interrupt, output */ + 0x01a0 /* BCLK, input, active high */ + >; + }; + };
Documentation/devicetree/bindings/sound/wm8903.txt deleted +0 -82
82 lines not on this page · raw message
Signature · 1 line
2.33.0
Quoted 5 lines · David Heidelberg
Convert the Wolfson WM8903 Ultra-Low Power Stereo CODEC Device Tree binding documentation to json-schema.
Signed-off-by David Heidelberg <[email protected]>---
Thanks,
Charles
Quoted 11 lines · David Heidelberg
Convert the Wolfson WM8903 Ultra-Low Power Stereo CODEC Device Tree binding documentation to json-schema.
Signed-off-by David Heidelberg <[email protected]>--- .../devicetree/bindings/sound/wlf,wm8903.yaml | 116 ++++++++++++++++++ .../devicetree/bindings/sound/wm8903.txt | 82 ------------- 2 files changed, 116 insertions(+), 82 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8903.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8903.txt
Mark Brown
maintainerQuoted 2 lines · David Heidelberg
Convert the Wolfson WM8903 Ultra-Low Power Stereo CODEC Device Tree binding documentation to json-schema.
Please submit patches using subject lines reflecting the style for the subsystem, this makes it easier for people to identify relevant patches. Look at what existing commits in the area you're changing are doing and make sure your subject lines visually resemble what they're doing. There's no need to resubmit to fix this alone.
Mark Brown
maintainerQuoted 4 lines · David Heidelberg
Convert the Wolfson WM8903 Ultra-Low Power Stereo CODEC Device Tree binding documentation to json-schema.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] dt-bindings: sound: wlf,wm8903: Convert txt bindings to yaml
commit: 5ecc573d0c542c0f95497ba4586a6226814e4e18
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark