Skip to contentSkip to conversation

xfs: rework xlog_write()

PATCH Superseded Dave Chinner 3 participants 33 messages Nov 9, 2021 – Nov 18, 2021 XFS filesystem

v6 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v6 cover xfs: rework xlog_write()

Time to try again for this code....

xlog_write() is code that causes severe eye bleeding. It's extremely difficult to understand the way it is structured, and extremely easy to break because of all the weird parameters it passes between functions that do very non-obvious things. state is set in xlog_write_finish_copy() that is carried across both outer and inner loop iterations that is used by xlog_write_setup_copy(), which also sets state that xlog_write_finish_copy() needs. The way iclog space was obtained affects the accounting logic that ends up being passed to xlog_state_finish_copy(). The code that handles commit iclogs is spread over multiple functions and is obfuscated by the set/finish copy code.

It's just a mess.

It's also extremely inefficient.

For all the complexity created by having to keep track of partial copy state for loop continuation, this is a *rare* occurrence. On a 256kB iclog buffer, we can copy a couple of thousand regions (e.g. inode log format + inode core regions) without hitting the partial copy case once. IOWs, we don't need to track partial copy state for the vast majority of region copy operations we perform. It's all unnecessary overhead.

Not to mention that before we even start the copy, we walk every log vector and log iovec to count the op headers needed and the amount of space consumed by the log vector chain despite having just done a log item walk to construct the log vector chain. This is all unnecessary overhead given that the CIL code already counts the vectors and can trivially count the size of the log vector chain at the same time.

Then there is the opheaders that xlog_write() adds before every region. This is why it needs to count headers, because we have to account for this space they use in the journal. We've already reserved this space when committing items to the CIL, but we still require xlog_write() to add these fixed size headers to log regions and account for the space in the CIL context log ticket.

Hence we have complexity tracking and reserving CIL space at transaction commit time, as well as complexity formatting and accounting for this space when the CIL writes them to the log. This can be done much more efficiently by adding the opheaders to the log regions at item formatting time, largely removing the need to do anything but update opheader lengths and flags in xlog_write().

This opens up a bunch of other optimisations in the item formatting code that can reduce the number of regions we need to track, but that is not a topic this patch set tries to address.

The simplification of the accounting and reservation of space for log opheaders during the transaction commit path allows for further optimisations of that fast path. e.g. it makes it possible to move to per-cpu accounting and tracking of the CIL.

Further, the simplifications in opheader management allow us to implement a fast path for xlog_write() that does almost nothing but iterate the log vector chain doing memcpy() and advancing the iclog data pointer. The only time we need to worry about partial copies is when a log vector will not wholly fit within the current iclog. By writing a slow path that just handles a single log vector that needs to be split across multiple iclogs, we get rid of all the difficult to follow logic. That is what this patchset implements.

Overall, we go from 3 iterations of the log vector chain to two, the majority of the copies hit the xlog_write_single() fast path, the xlog_write() code is much simpler, the handling of iclog state is much cleaner, and all the partial copy state is contained within a single function. The fast path loops are much smaller and tighter, the regions we memcpy() are larger, and so overall the code is much more efficient.

Unfortunately, this code is complex and full of subtle stuff that takes a *lot* of time and effort to understand. Hence I feel that these changes aren't actually properly reviewable by anyone. If someone else presented this patchset to me, I'd be pretty much say the same thing, because to understand all the subtle corner cases in xlog_write() takes weeks of bashing your head repeatedly into said corner cases.

But, really, that's why I've rewritten the code. I think the code I've written is much easier to understand and there's less of it. The compiled code is smaller and faster. It passes fstests. And it opens more avenues for future improvement of the log write code that would otherwise have to do with the mess of xlog_write()....

git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.git xlog-write-rework

Version 6:
- split out from aggregated patchset
- rebase on linux-xfs/for-next
- include iclog->ic_datap type change patch from Christoph Hellwig
- rolled xlog_write_iovec()/xlog_write_full() improvements into the xlog_write_single() introduction (adaption from patches written by Christoph Hellwig)
- pass record_cnt and data_cnt into xlog_write_single() right from the start rather than modify the interface when xlog_write_partial() comes along.
- rolled the xlog_write_partial() and log vector iteration improvements into the xlog_write_partial() introduction (adaption from patches written by Christoph Hellwig).
- include remove xlog_verify_dest_ptr() patch from Christoph Hellwig

Version 5:
- https://lore.kernel.org/linux-xfs/[email protected]/

#1 lore raw

PATCH v6 1/16 xfs: factor out the CIL transaction header building

From: Dave Chinner <[email protected]>

It is static code deep in the middle of the CIL push logic. Factor it out into a helper so that it is clear and easy to modify separately.

---
 fs/xfs/xfs_log_cil.c | 61 ++++++++++++++++++++++++++++----------------
 1 file changed, 39 insertions(+), 22 deletions(-)
fs/xfs/xfs_log_cil.c +39 -22
index 6c93c8ada6f3..28f8104fbef1 100644
@@ -834,6 +834,41 @@ xlog_cil_write_commit_record(
 	return error;
 }
 
+struct xlog_cil_trans_hdr {
+	struct xfs_trans_header	thdr;
+	struct xfs_log_iovec	lhdr;
+};
+
+/*
+ * Build a checkpoint transaction header to begin the journal transaction.  We
+ * need to account for the space used by the transaction header here as it is
+ * not accounted for in xlog_write().
+ */
+static void
+xlog_cil_build_trans_hdr(
+	struct xfs_cil_ctx	*ctx,
+	struct xlog_cil_trans_hdr *hdr,
+	struct xfs_log_vec	*lvhdr,
+	int			num_iovecs)
+{
+	struct xlog_ticket	*tic = ctx->ticket;
+
+	memset(hdr, 0, sizeof(*hdr));
+
+	hdr->thdr.th_magic = XFS_TRANS_HEADER_MAGIC;
+	hdr->thdr.th_type = XFS_TRANS_CHECKPOINT;
+	hdr->thdr.th_tid = tic->t_tid;
+	hdr->thdr.th_num_items = num_iovecs;
+	hdr->lhdr.i_addr = &hdr->thdr;
+	hdr->lhdr.i_len = sizeof(xfs_trans_header_t);
+	hdr->lhdr.i_type = XLOG_REG_TYPE_TRANSHDR;
+	tic->t_curr_res -= hdr->lhdr.i_len + sizeof(struct xlog_op_header);
+
+	lvhdr->lv_niovecs = 1;
+	lvhdr->lv_iovecp = &hdr->lhdr;
+	lvhdr->lv_next = ctx->lv_chain;
+}
+
 /*
  * Push the Committed Item List to the log.
  *
@@ -858,11 +893,9 @@ xlog_cil_push_work(
 	struct xlog		*log = cil->xc_log;
 	struct xfs_log_vec	*lv;
 	struct xfs_cil_ctx	*new_ctx;
-	struct xlog_ticket	*tic;
 	int			num_iovecs;
 	int			error = 0;
-	struct xfs_trans_header thdr;
-	struct xfs_log_iovec	lhdr;
+	struct xlog_cil_trans_hdr thdr;
 	struct xfs_log_vec	lvhdr = { NULL };
 	xfs_lsn_t		preflush_tail_lsn;
 	xfs_csn_t		push_seq;
@@ -1011,24 +1044,8 @@ xlog_cil_push_work(
 	 * Build a checkpoint transaction header and write it to the log to
 	 * begin the transaction. We need to account for the space used by the
 	 * transaction header here as it is not accounted for in xlog_write().
-	 *
-	 * The LSN we need to pass to the log items on transaction commit is
-	 * the LSN reported by the first log vector write. If we use the commit
-	 * record lsn then we can move the tail beyond the grant write head.
 	 */
-	tic = ctx->ticket;
-	thdr.th_magic = XFS_TRANS_HEADER_MAGIC;
-	thdr.th_type = XFS_TRANS_CHECKPOINT;
-	thdr.th_tid = tic->t_tid;
-	thdr.th_num_items = num_iovecs;
-	lhdr.i_addr = &thdr;
-	lhdr.i_len = sizeof(xfs_trans_header_t);
-	lhdr.i_type = XLOG_REG_TYPE_TRANSHDR;
-	tic->t_curr_res -= lhdr.i_len + sizeof(xlog_op_header_t);
-
-	lvhdr.lv_niovecs = 1;
-	lvhdr.lv_iovecp = &lhdr;
-	lvhdr.lv_next = ctx->lv_chain;
+	xlog_cil_build_trans_hdr(ctx, &thdr, &lvhdr, num_iovecs);
 
 	/*
 	 * Before we format and submit the first iclog, we have to ensure that
@@ -1044,7 +1061,7 @@ xlog_cil_push_work(
 	if (error)
 		goto out_abort_free_ticket;
 
-	xfs_log_ticket_ungrant(log, tic);
+	xfs_log_ticket_ungrant(log, ctx->ticket);
 
 	/*
 	 * If the checkpoint spans multiple iclogs, wait for all previous iclogs
@@ -1108,7 +1125,7 @@ xlog_cil_push_work(
 	return;
 
 out_abort_free_ticket:
-	xfs_log_ticket_ungrant(log, tic);
+	xfs_log_ticket_ungrant(log, ctx->ticket);
 	ASSERT(xlog_is_shutdown(log));
 	if (!ctx->commit_iclog) {
 		xlog_cil_committed(ctx);
Signature · 1 line
2.33.0
#2 lore raw

PATCH v6 2/16 xfs: only CIL pushes require a start record

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

So move the one-off start record writing in xlog_write() out into the static header that the CIL push builds to write into the log initially. This simplifes the xlog_write() logic a lot.

pahole on x86-64 confirms that the xlog_cil_trans_hdr is correctly 32 bit aligned and packed for copying the log op and transaction headers directly into the log as a single log region copy.

struct xlog_cil_trans_hdr {

        struct xlog_op_header      oph[2];               /*     0    24 */
        struct xfs_trans_header    thdr;                 /*    24    16 */
        struct xfs_log_iovec       lhdr[2];              /*    40    32 */
        /* size: 72, cachelines: 2, members: 3 */
        /* last cacheline: 8 bytes */
};

A wart is needed to handle the fact that length of the region the opheader points to doesn't include the opheader length. hence if we embed the opheader, we have to substract the opheader length from the length written into the opheader by the generic copying code. This will eventually go away when everything is converted to embedded opheaders.

---
 fs/xfs/xfs_log.c     | 90 ++++++++++++++++++++++----------------------
 fs/xfs/xfs_log_cil.c | 44 ++++++++++++++++++----
 2 files changed, 81 insertions(+), 53 deletions(-)
fs/xfs/xfs_log.c +45 -45
index 89fec9a18c34..e2953ce470de 100644
@@ -2235,9 +2235,9 @@ xlog_print_trans(
 }
 
 /*
- * Calculate the potential space needed by the log vector.  We may need a start
- * record, and each region gets its own struct xlog_op_header and may need to be
- * double word aligned.
+ * Calculate the potential space needed by the log vector. If this is a start
+ * transaction, the caller has already accounted for both opheaders in the start
+ * transaction, so we don't need to account for them here.
  */
 static int
 xlog_write_calc_vec_length(
@@ -2250,9 +2250,6 @@ xlog_write_calc_vec_length(
 	int			len = 0;
 	int			i;
 
-	if (optype & XLOG_START_TRANS)
-		headers++;
-
 	for (lv = log_vector; lv; lv = lv->lv_next) {
 		/* we don't write ordered log vectors */
 		if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED)
@@ -2268,24 +2265,20 @@ xlog_write_calc_vec_length(
 		}
 	}
 
+	/* Don't account for regions with embedded ophdrs */
+	if (optype && headers > 0) {
+		if (optype & XLOG_START_TRANS) {
+			ASSERT(headers >= 2);
+			headers -= 2;
+		}
+	}
+
 	ticket->t_res_num_ophdrs += headers;
 	len += headers * sizeof(struct xlog_op_header);
 
 	return len;
 }
 
-static void
-xlog_write_start_rec(
-	struct xlog_op_header	*ophdr,
-	struct xlog_ticket	*ticket)
-{
-	ophdr->oh_tid	= cpu_to_be32(ticket->t_tid);
-	ophdr->oh_clientid = ticket->t_clientid;
-	ophdr->oh_len = 0;
-	ophdr->oh_flags = XLOG_START_TRANS;
-	ophdr->oh_res2 = 0;
-}
-
 static xlog_op_header_t *
 xlog_write_setup_ophdr(
 	struct xlog		*log,
@@ -2481,9 +2474,11 @@ xlog_write(
 	 * If this is a commit or unmount transaction, we don't need a start
 	 * record to be written.  We do, however, have to account for the
 	 * commit or unmount header that gets written. Hence we always have
-	 * to account for an extra xlog_op_header here.
+	 * to account for an extra xlog_op_header here for commit and unmount
+	 * records.
 	 */
-	ticket->t_curr_res -= sizeof(struct xlog_op_header);
+	if (optype & (XLOG_COMMIT_TRANS | XLOG_UNMOUNT_TRANS))
+		ticket->t_curr_res -= sizeof(struct xlog_op_header);
 	if (ticket->t_curr_res < 0) {
 		xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
 		     "ctx ticket reservation ran out. Need to up reservation");
@@ -2524,7 +2519,7 @@ xlog_write(
 			int			copy_len;
 			int			copy_off;
 			bool			ordered = false;
-			bool			wrote_start_rec = false;
+			bool			added_ophdr = false;
 
 			/* ordered log vectors have no regions to write */
 			if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED) {
@@ -2538,25 +2533,24 @@ xlog_write(
 			ASSERT((unsigned long)ptr % sizeof(int32_t) == 0);
 
 			/*
-			 * Before we start formatting log vectors, we need to
-			 * write a start record. Only do this for the first
-			 * iclog we write to.
+			 * The XLOG_START_TRANS has embedded ophdrs for the
+			 * start record and transaction header. They will always
+			 * be the first two regions in the lv chain.
 			 */
 			if (optype & XLOG_START_TRANS) {
-				xlog_write_start_rec(ptr, ticket);
-				xlog_write_adv_cnt(&ptr, &len, &log_offset,
-						sizeof(struct xlog_op_header));
-				optype &= ~XLOG_START_TRANS;
-				wrote_start_rec = true;
-			}
-
-			ophdr = xlog_write_setup_ophdr(log, ptr, ticket, optype);
-			if (!ophdr)
-				return -EIO;
+				ophdr = reg->i_addr;
+				if (index)
+					optype &= ~XLOG_START_TRANS;
+			} else {
+				ophdr = xlog_write_setup_ophdr(log, ptr,
+							ticket, optype);
+				if (!ophdr)
+					return -EIO;
 
-			xlog_write_adv_cnt(&ptr, &len, &log_offset,
+				xlog_write_adv_cnt(&ptr, &len, &log_offset,
 					   sizeof(struct xlog_op_header));
-
+				added_ophdr = true;
+			}
 			len += xlog_write_setup_copy(ticket, ophdr,
 						     iclog->ic_size-log_offset,
 						     reg->i_len,
@@ -2565,13 +2559,22 @@ xlog_write(
 						     &partial_copy_len);
 			xlog_verify_dest_ptr(log, ptr);
 
+
+			/*
+			 * Wart: need to update length in embedded ophdr not
+			 * to include it's own length.
+			 */
+			if (!added_ophdr) {
+				ophdr->oh_len = cpu_to_be32(copy_len -
+						sizeof(struct xlog_op_header));
+			}
 			/*
 			 * Copy region.
 			 *
-			 * Unmount records just log an opheader, so can have
-			 * empty payloads with no data region to copy. Hence we
-			 * only copy the payload if the vector says it has data
-			 * to copy.
+			 * Commit and unmount records just log an opheader, so
+			 * we can have empty payloads with no data region to
+			 * copy.  Hence we only copy the payload if the vector
+			 * says it has data to copy.
 			 */
 			ASSERT(copy_len >= 0);
 			if (copy_len > 0) {
@@ -2579,12 +2582,9 @@ xlog_write(
 				xlog_write_adv_cnt(&ptr, &len, &log_offset,
 						   copy_len);
 			}
-			copy_len += sizeof(struct xlog_op_header);
-			record_cnt++;
-			if (wrote_start_rec) {
+			if (added_ophdr)
 				copy_len += sizeof(struct xlog_op_header);
-				record_cnt++;
-			}
+			record_cnt++;
 			data_cnt += contwr ? copy_len : 0;
 
 			error = xlog_write_copy_finish(log, iclog, optype,
fs/xfs/xfs_log_cil.c +36 -8

70 lines not on this page · raw message

Signature · 1 line
2.33.0
Reviewed-by on v6 2/16
#3 lore raw

Re: [PATCH 02/16] xfs: only CIL pushes require a start record

fs/xfs/xfs_log_cil.c xlog_cil_write_commit_record( · line 840

Quoted 4 lines

struct xlog_cil_trans_hdr {

fs/xfs/xfs_log_cil.c +2 -0
+	struct xlog_op_header	oph[2];
 	struct xfs_trans_header	thdr;
+	struct xfs_log_iovec	lhdr[2];

I find the logic where xlog_cil_build_trans_hdr stuffs oph[1] and thdr into a single log_iovec rather confusing even if it is correct. But I'd also rather get this series in and see if it can be cleaned up later, so I'll just leave that as a note here.

fs/xfs/xfs_log_cil.c xlog_cil_build_trans_hdr( · line 863

Quoted 2 lines
fs/xfs/xfs_log_cil.c +1 -0
 	struct xlog_ticket	*tic = ctx->ticket;
+	uint32_t		tid = cpu_to_be32(tic->t_tid);

This needs to be a __be32.

fs/xfs/xfs_log_cil.c xlog_cil_build_trans_hdr( · line 884

Quoted 2 lines
fs/xfs/xfs_log_cil.c +1 -1
-	hdr->thdr.th_tid = tic->t_tid;
+	hdr->thdr.th_tid = tid;

And this needs to keep using the not byteswapped version. (but it appears we never look at the trans header in recovery anyway currently).

Otherwise looks good:

#4 lore raw

Re: [PATCH 02/16] xfs: only CIL pushes require a start record

Quoted 10 lines · Christoph Hellwig

fs/xfs/xfs_log_cil.c xlog_cil_write_commit_record( · line 840

Quoted 4 lines

struct xlog_cil_trans_hdr {

fs/xfs/xfs_log_cil.c +2 -0
+	struct xlog_op_header	oph[2];
 	struct xfs_trans_header	thdr;
+	struct xfs_log_iovec	lhdr[2];

I find the logic where xlog_cil_build_trans_hdr stuffs oph[1] and thdr into a single log_iovec rather confusing even if it is correct. But I'd also rather get this series in and see if it can be cleaned up later, so I'll just leave that as a note here.

Quoted 4 lines

fs/xfs/xfs_log_cil.c xlog_cil_build_trans_hdr( · line 863

Quoted 2 lines
fs/xfs/xfs_log_cil.c +1 -0
 	struct xlog_ticket	*tic = ctx->ticket;
+	uint32_t		tid = cpu_to_be32(tic->t_tid);

This needs to be a __be32.

*nod*.

Quoted 6 lines

fs/xfs/xfs_log_cil.c xlog_cil_build_trans_hdr( · line 884

Quoted 2 lines
fs/xfs/xfs_log_cil.c +1 -1
-	hdr->thdr.th_tid = tic->t_tid;
+	hdr->thdr.th_tid = tid;

And this needs to keep using the not byteswapped version. (but it appears we never look at the trans header in recovery anyway currently).

Right, it's never, ever been used, except in xfs_logprint. Prior to delayed logging, it was defined as:

__int32_t th_tid; /* transaction id (unused) */

So it was always zero. It is still unused by anything except logprint, in which case I noticed that it was byteswapped compared to the op header TID, which made searches for ophdrs that matched the transaction header TID difficult.

I've changed it back to what it was and added a note to the code to indicate that the transaction header is in host byte order, not big endian.

Cheers,

Dave.

Signature · 2 lines
Dave Chinner
[email protected]
#5 lore raw

PATCH v6 3/16 xfs: embed the xlog_op_header in the unmount record

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

Remove another case where xlog_write() has to prepend an opheader to a log transaction. The unmount record + ophdr is smaller than the minimum amount of space guaranteed to be free in an iclog (2 * sizeof(ophdr)) and so we don't have to care about an unmount record being split across 2 iclogs.

---
 fs/xfs/xfs_log.c | 39 ++++++++++++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 11 deletions(-)
fs/xfs/xfs_log.c +28 -11
index e2953ce470de..e5515d0c85c4 100644
@@ -915,12 +915,22 @@ xlog_write_unmount_record(
 	struct xlog		*log,
 	struct xlog_ticket	*ticket)
 {
-	struct xfs_unmount_log_format ulf = {
-		.magic = XLOG_UNMOUNT_TYPE,
+	struct  {
+		struct xlog_op_header ophdr;
+		struct xfs_unmount_log_format ulf;
+	} unmount_rec = {
+		.ophdr = {
+			.oh_clientid = XFS_LOG,
+			.oh_tid = cpu_to_be32(ticket->t_tid),
+			.oh_flags = XLOG_UNMOUNT_TRANS,
+		},
+		.ulf = {
+			.magic = XLOG_UNMOUNT_TYPE,
+		},
 	};
 	struct xfs_log_iovec reg = {
-		.i_addr = &ulf,
-		.i_len = sizeof(ulf),
+		.i_addr = &unmount_rec,
+		.i_len = sizeof(unmount_rec),
 		.i_type = XLOG_REG_TYPE_UNMOUNT,
 	};
 	struct xfs_log_vec vec = {
@@ -928,8 +938,12 @@ xlog_write_unmount_record(
 		.lv_iovecp = &reg,
 	};
 
+	BUILD_BUG_ON((sizeof(struct xlog_op_header) +
+		      sizeof(struct xfs_unmount_log_format)) !=
+							sizeof(unmount_rec));
+
 	/* account for space used by record data */
-	ticket->t_curr_res -= sizeof(ulf);
+	ticket->t_curr_res -= sizeof(unmount_rec);
 
 	return xlog_write(log, NULL, &vec, ticket, XLOG_UNMOUNT_TRANS);
 }
@@ -2267,6 +2281,8 @@ xlog_write_calc_vec_length(
 
 	/* Don't account for regions with embedded ophdrs */
 	if (optype && headers > 0) {
+		if (optype & XLOG_UNMOUNT_TRANS)
+			headers--;
 		if (optype & XLOG_START_TRANS) {
 			ASSERT(headers >= 2);
 			headers -= 2;
@@ -2472,12 +2488,11 @@ xlog_write(
 
 	/*
 	 * If this is a commit or unmount transaction, we don't need a start
-	 * record to be written.  We do, however, have to account for the
-	 * commit or unmount header that gets written. Hence we always have
-	 * to account for an extra xlog_op_header here for commit and unmount
-	 * records.
+	 * record to be written.  We do, however, have to account for the commit
+	 * header that gets written. Hence we always have to account for an
+	 * extra xlog_op_header here for commit records.
 	 */
-	if (optype & (XLOG_COMMIT_TRANS | XLOG_UNMOUNT_TRANS))
+	if (optype & XLOG_COMMIT_TRANS)
 		ticket->t_curr_res -= sizeof(struct xlog_op_header);
 	if (ticket->t_curr_res < 0) {
 		xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
@@ -2541,6 +2556,8 @@ xlog_write(
 				ophdr = reg->i_addr;
 				if (index)
 					optype &= ~XLOG_START_TRANS;
+			} else if (optype & XLOG_UNMOUNT_TRANS) {
+				ophdr = reg->i_addr;
 			} else {
 				ophdr = xlog_write_setup_ophdr(log, ptr,
 							ticket, optype);
@@ -2571,7 +2588,7 @@ xlog_write(
 			/*
 			 * Copy region.
 			 *
-			 * Commit and unmount records just log an opheader, so
+			 * Commit records just log an opheader, so
 			 * we can have empty payloads with no data region to
 			 * copy.  Hence we only copy the payload if the vector
 			 * says it has data to copy.
Signature · 1 line
2.33.0
#6 lore raw

PATCH v6 4/16 xfs: embed the xlog_op_header in the commit record

In reply to Dave Chinner

Remove the final case where xlog_write() has to prepend an opheader to a log transaction. Similar to the start record, the commit record is just an empty opheader with a XLOG_COMMIT_TRANS type, so we can just make this the payload for the region being passed to xlog_write() and remove the special handling in xlog_write() for the commit record.

---
 fs/xfs/xfs_log.c     | 22 ++++++----------------
 fs/xfs/xfs_log_cil.c | 11 +++++++++--
 2 files changed, 15 insertions(+), 18 deletions(-)
fs/xfs/xfs_log.c +6 -16
index e5515d0c85c4..f789acd2f755 100644
@@ -2281,11 +2281,10 @@ xlog_write_calc_vec_length(
 
 	/* Don't account for regions with embedded ophdrs */
 	if (optype && headers > 0) {
-		if (optype & XLOG_UNMOUNT_TRANS)
-			headers--;
+		headers--;
 		if (optype & XLOG_START_TRANS) {
-			ASSERT(headers >= 2);
-			headers -= 2;
+			ASSERT(headers >= 1);
+			headers--;
 		}
 	}
 
@@ -2486,14 +2485,6 @@ xlog_write(
 	int			data_cnt = 0;
 	int			error = 0;
 
-	/*
-	 * If this is a commit or unmount transaction, we don't need a start
-	 * record to be written.  We do, however, have to account for the commit
-	 * header that gets written. Hence we always have to account for an
-	 * extra xlog_op_header here for commit records.
-	 */
-	if (optype & XLOG_COMMIT_TRANS)
-		ticket->t_curr_res -= sizeof(struct xlog_op_header);
 	if (ticket->t_curr_res < 0) {
 		xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
 		     "ctx ticket reservation ran out. Need to up reservation");
@@ -2550,14 +2541,13 @@ xlog_write(
 			/*
 			 * The XLOG_START_TRANS has embedded ophdrs for the
 			 * start record and transaction header. They will always
-			 * be the first two regions in the lv chain.
+			 * be the first two regions in the lv chain. Commit and
+			 * unmount records also have embedded ophdrs.
 			 */
-			if (optype & XLOG_START_TRANS) {
+			if (optype) {
 				ophdr = reg->i_addr;
 				if (index)
 					optype &= ~XLOG_START_TRANS;
-			} else if (optype & XLOG_UNMOUNT_TRANS) {
-				ophdr = reg->i_addr;
 			} else {
 				ophdr = xlog_write_setup_ophdr(log, ptr,
 							ticket, optype);
fs/xfs/xfs_log_cil.c +9 -2
index 560af08d81dc..56c456263639 100644
@@ -810,9 +810,14 @@ xlog_cil_write_commit_record(
 	struct xfs_cil_ctx	*ctx)
 {
 	struct xlog		*log = ctx->cil->xc_log;
+	struct xlog_op_header	ophdr = {
+		.oh_clientid = XFS_TRANSACTION,
+		.oh_tid = cpu_to_be32(ctx->ticket->t_tid),
+		.oh_flags = XLOG_COMMIT_TRANS,
+	};
 	struct xfs_log_iovec	reg = {
-		.i_addr = NULL,
-		.i_len = 0,
+		.i_addr = &ophdr,
+		.i_len = sizeof(struct xlog_op_header),
 		.i_type = XLOG_REG_TYPE_COMMIT,
 	};
 	struct xfs_log_vec	vec = {
@@ -828,6 +833,8 @@ xlog_cil_write_commit_record(
 	if (error)
 		return error;
 
+	/* account for space used by record data */
+	ctx->ticket->t_curr_res -= reg.i_len;
 	error = xlog_write(log, ctx, &vec, ctx->ticket, XLOG_COMMIT_TRANS);
 	if (error)
 		xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
Signature · 1 line
2.33.0
Reviewed-by on v6 4/16
#7 lore raw

Re: [PATCH 04/16] xfs: embed the xlog_op_header in the commit record

fs/xfs/xfs_log.c xlog_write( · line 2547

Quoted 2 lines · Dave Chinner
fs/xfs/xfs_log.c +1 -1
-			if (optype & XLOG_START_TRANS) {
+			if (optype) {

Shouldn't this explicitly check for XLOG_START_TRANS or XLOG_UNMOUNT_TRANS? The cont flags can't really happen here, so it won't make a functional difference, but it would document the intent much better.

Otherwise looks good:

#8 lore raw

Re: [PATCH 04/16] xfs: embed the xlog_op_header in the commit record

Quoted 8 lines · Christoph Hellwig

fs/xfs/xfs_log.c xlog_write( · line 2547

Quoted 2 lines · Dave Chinner
fs/xfs/xfs_log.c +1 -1
-			if (optype & XLOG_START_TRANS) {
+			if (optype) {

Shouldn't this explicitly check for XLOG_START_TRANS or XLOG_UNMOUNT_TRANS? The cont flags can't really happen here, so it won't make a functional difference, but it would document the intent much better.

This scaffolding disappears completely in a couple of patches time, so it's not worth the effort to polishing it to perfection.

Quoted 3 lines

Otherwise looks good:

Thanks!

Signature · 2 lines
Dave Chinner
[email protected]
#9 lore raw

PATCH v6 5/16 xfs: log tickets don't need log client id

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

We currently set the log ticket client ID when we reserve a transaction. This client ID is only ever written to the log by a CIL checkpoint or unmount records, and so anything using a high level transaction allocated through xfs_trans_alloc() does not need a log ticket client ID to be set.

For the CIL checkpoint, the client ID written to the journal is always XFS_TRANSACTION, and for the unmount record it is always XFS_LOG, and nothing else writes to the log. All of these operations tell xlog_write() exactly what they need to write to the log (the optype) and build their own opheaders for start, commit and unmount records. Hence we no longer need to set the client id in either the log ticket or the xfs_trans.

---
 fs/xfs/libxfs/xfs_log_format.h |  1 -
 fs/xfs/xfs_log.c               | 47 ++++++----------------------------
 fs/xfs/xfs_log.h               | 14 ++++------
 fs/xfs/xfs_log_cil.c           |  2 +-
 fs/xfs/xfs_log_priv.h          | 10 ++------
 fs/xfs/xfs_trans.c             |  6 ++---
 6 files changed, 18 insertions(+), 62 deletions(-)
fs/xfs/libxfs/xfs_log_format.h +0 -1
index b322db523d65..2b89141ae81a 100644
@@ -69,7 +69,6 @@ static inline uint xlog_get_cycle(char *ptr)
 
 /* Log Clients */
 #define XFS_TRANSACTION		0x69
-#define XFS_VOLUME		0x2
 #define XFS_LOG			0xaa
 
 #define XLOG_UNMOUNT_TYPE	0x556e	/* Un for Unmount */
fs/xfs/xfs_log.c +8 -39

100 lines not on this page · raw message

fs/xfs/xfs_log.h +5 -9
index dc1b77b92fc1..09b8fe9994f2 100644
@@ -117,15 +117,11 @@ int	  xfs_log_mount_finish(struct xfs_mount *mp);
 void	xfs_log_mount_cancel(struct xfs_mount *);
 xfs_lsn_t xlog_assign_tail_lsn(struct xfs_mount *mp);
 xfs_lsn_t xlog_assign_tail_lsn_locked(struct xfs_mount *mp);
-void	  xfs_log_space_wake(struct xfs_mount *mp);
-int	  xfs_log_reserve(struct xfs_mount *mp,
-			  int		   length,
-			  int		   count,
-			  struct xlog_ticket **ticket,
-			  uint8_t		   clientid,
-			  bool		   permanent);
-int	  xfs_log_regrant(struct xfs_mount *mp, struct xlog_ticket *tic);
-void      xfs_log_unmount(struct xfs_mount *mp);
+void	xfs_log_space_wake(struct xfs_mount *mp);
+int	xfs_log_reserve(struct xfs_mount *mp, int length, int count,
+			struct xlog_ticket **ticket, bool permanent);
+int	xfs_log_regrant(struct xfs_mount *mp, struct xlog_ticket *tic);
+void	xfs_log_unmount(struct xfs_mount *mp);
 bool	xfs_log_writable(struct xfs_mount *mp);
 
 struct xlog_ticket *xfs_log_ticket_get(struct xlog_ticket *ticket);
fs/xfs/xfs_log_cil.c +1 -1
index 56c456263639..eb2aec8ac0c9 100644
@@ -37,7 +37,7 @@ xlog_cil_ticket_alloc(
 {
 	struct xlog_ticket *tic;
 
-	tic = xlog_ticket_alloc(log, 0, 1, XFS_TRANSACTION, 0);
+	tic = xlog_ticket_alloc(log, 0, 1, 0);
 
 	/*
 	 * set the current reservation to zero so we know to steal the basic
fs/xfs/xfs_log_priv.h +2 -8
index 23103d68423c..65fb97d596dd 100644
@@ -164,7 +164,6 @@ typedef struct xlog_ticket {
 	int		   t_unit_res;	 /* unit reservation in bytes    : 4  */
 	char		   t_ocnt;	 /* original count		 : 1  */
 	char		   t_cnt;	 /* current count		 : 1  */
-	char		   t_clientid;	 /* who does this belong to;	 : 1  */
 	char		   t_flags;	 /* properties of reservation	 : 1  */
 
         /* reservation array fields */
@@ -498,13 +497,8 @@ extern __le32	 xlog_cksum(struct xlog *log, struct xlog_rec_header *rhead,
 			    char *dp, int size);
 
 extern struct kmem_cache *xfs_log_ticket_cache;
-struct xlog_ticket *
-xlog_ticket_alloc(
-	struct xlog	*log,
-	int		unit_bytes,
-	int		count,
-	char		client,
-	bool		permanent);
+struct xlog_ticket *xlog_ticket_alloc(struct xlog *log, int unit_bytes,
+		int count, bool permanent);
 
 static inline void
 xlog_write_adv_cnt(void **ptr, int *len, int *off, size_t bytes)
fs/xfs/xfs_trans.c +2 -4
index 234a9d9c2f43..196ee8aeee35 100644
@@ -194,11 +194,9 @@ xfs_trans_reserve(
 			ASSERT(resp->tr_logflags & XFS_TRANS_PERM_LOG_RES);
 			error = xfs_log_regrant(mp, tp->t_ticket);
 		} else {
-			error = xfs_log_reserve(mp,
-						resp->tr_logres,
+			error = xfs_log_reserve(mp, resp->tr_logres,
 						resp->tr_logcount,
-						&tp->t_ticket, XFS_TRANSACTION,
-						permanent);
+						&tp->t_ticket, permanent);
 		}
 
 		if (error)
Signature · 1 line
2.33.0
#10 lore raw

PATCH v6 6/16 xfs: move log iovec alignment to preparation function

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

To include log op headers directly into the log iovec regions that the ophdrs wrap, we need to move the buffer alignment code from xlog_finish_iovec() to xlog_prepare_iovec(). This is because the xlog_op_header is only 12 bytes long, and we need the buffer that the caller formats their data into to be 8 byte aligned.

Hence once we start prepending the ophdr in xlog_prepare_iovec(), we are going to need to manage the padding directly to ensure that the buffer pointer returned is correctly aligned.

---
 fs/xfs/xfs_log.h | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)
fs/xfs/xfs_log.h +14 -11
index 09b8fe9994f2..d1fc43476166 100644
@@ -21,6 +21,16 @@ struct xfs_log_vec {
 
 #define XFS_LOG_VEC_ORDERED	(-1)
 
+/*
+ * We need to make sure the buffer pointer returned is naturally aligned for the
+ * biggest basic data type we put into it. We have already accounted for this
+ * padding when sizing the buffer.
+ *
+ * However, this padding does not get written into the log, and hence we have to
+ * track the space used by the log vectors separately to prevent log space hangs
+ * due to inaccurate accounting (i.e. a leak) of the used log space through the
+ * CIL context ticket.
+ */
 static inline void *
 xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
 		uint type)
@@ -34,6 +44,9 @@ xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
 		vec = &lv->lv_iovecp[0];
 	}
 
+	if (!IS_ALIGNED(lv->lv_buf_len, sizeof(uint64_t)))
+		lv->lv_buf_len = round_up(lv->lv_buf_len, sizeof(uint64_t));
+
 	vec->i_type = type;
 	vec->i_addr = lv->lv_buf + lv->lv_buf_len;
 
@@ -43,20 +56,10 @@ xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
 	return vec->i_addr;
 }
 
-/*
- * We need to make sure the next buffer is naturally aligned for the biggest
- * basic data type we put into it.  We already accounted for this padding when
- * sizing the buffer.
- *
- * However, this padding does not get written into the log, and hence we have to
- * track the space used by the log vectors separately to prevent log space hangs
- * due to inaccurate accounting (i.e. a leak) of the used log space through the
- * CIL context ticket.
- */
 static inline void
 xlog_finish_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec *vec, int len)
 {
-	lv->lv_buf_len += round_up(len, sizeof(uint64_t));
+	lv->lv_buf_len += len;
 	lv->lv_bytes += len;
 	vec->i_len = len;
 }
Signature · 1 line
2.33.0
#11 lore raw

PATCH v6 7/16 xfs: reserve space and initialise xlog_op_header in item formatting

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

Current xlog_write() adds op headers to the log manually for every log item region that is in the vector passed to it. While xlog_write() needs to stamp the transaction ID into the ophdr, we already know it's length, flags, clientid, etc at CIL commit time.

This means the only time that xlog write really needs to format and reserve space for a new ophdr is when a region is split across two iclogs. Adding the opheader and accounting for it as part of the normal formatted item region means we simplify the accounting of space used by a transaction and we don't have to special case reserving of space in for the ophdrs in xlog_write(). It also means we can largely initialise the ophdr in transaction commit instead of xlog_write, making the xlog_write formatting inner loop much tighter.

xlog_prepare_iovec() is now too large to stay as an inline function, so we move it out of line and into xfs_log.c.

Object sizes:
text data bss dec hex filename
1125934 305951 484 1432369 15db31 fs/xfs/built-in.a.before
1123360 305951 484 1429795 15d123 fs/xfs/built-in.a.after

So the code is a roughly 2.5kB smaller with xlog_prepare_iovec() now out of line, even though it grew in size itself.

---
 fs/xfs/xfs_log.c     | 115 +++++++++++++++++++++++++++++--------------
 fs/xfs/xfs_log.h     |  42 +++-------------
 fs/xfs/xfs_log_cil.c |  25 +++++-----
 3 files changed, 99 insertions(+), 83 deletions(-)
fs/xfs/xfs_log.c +77 -38
index f09663d3664b..0923bee8d4e2 100644
@@ -90,6 +90,62 @@ xlog_iclogs_empty(
 static int
 xfs_log_cover(struct xfs_mount *);
 
+/*
+ * We need to make sure the buffer pointer returned is naturally aligned for the
+ * biggest basic data type we put into it. We have already accounted for this
+ * padding when sizing the buffer.
+ *
+ * However, this padding does not get written into the log, and hence we have to
+ * track the space used by the log vectors separately to prevent log space hangs
+ * due to inaccurate accounting (i.e. a leak) of the used log space through the
+ * CIL context ticket.
+ *
+ * We also add space for the xlog_op_header that describes this region in the
+ * log. This prepends the data region we return to the caller to copy their data
+ * into, so do all the static initialisation of the ophdr now. Because the ophdr
+ * is not 8 byte aligned, we have to be careful to ensure that we align the
+ * start of the buffer such that the region we return to the call is 8 byte
+ * aligned and packed against the tail of the ophdr.
+ */
+void *
+xlog_prepare_iovec(
+	struct xfs_log_vec	*lv,
+	struct xfs_log_iovec	**vecp,
+	uint			type)
+{
+	struct xfs_log_iovec	*vec = *vecp;
+	struct xlog_op_header	*oph;
+	uint32_t		len;
+	void			*buf;
+
+	if (vec) {
+		ASSERT(vec - lv->lv_iovecp < lv->lv_niovecs);
+		vec++;
+	} else {
+		vec = &lv->lv_iovecp[0];
+	}
+
+	len = lv->lv_buf_len + sizeof(struct xlog_op_header);
+	if (!IS_ALIGNED(len, sizeof(uint64_t))) {
+		lv->lv_buf_len = round_up(len, sizeof(uint64_t)) -
+					sizeof(struct xlog_op_header);
+	}
+
+	vec->i_type = type;
+	vec->i_addr = lv->lv_buf + lv->lv_buf_len;
+
+	oph = vec->i_addr;
+	oph->oh_clientid = XFS_TRANSACTION;
+	oph->oh_res2 = 0;
+	oph->oh_flags = 0;
+
+	buf = vec->i_addr + sizeof(struct xlog_op_header);
+	ASSERT(IS_ALIGNED((unsigned long)buf, sizeof(uint64_t)));
+
+	*vecp = vec;
+	return buf;
+}
+
 static void
 xlog_grant_sub_space(
 	struct xlog		*log,
@@ -2246,9 +2302,9 @@ xlog_print_trans(
 }
 
 /*
- * Calculate the potential space needed by the log vector. If this is a start
- * transaction, the caller has already accounted for both opheaders in the start
- * transaction, so we don't need to account for them here.
+ * Calculate the potential space needed by the log vector. All regions contain
+ * their own opheaders and they are accounted for in region space so we don't
+ * need to add them to the vector length here.
  */
 static int
 xlog_write_calc_vec_length(
@@ -2275,18 +2331,7 @@ xlog_write_calc_vec_length(
 			xlog_tic_add_region(ticket, vecp->i_len, vecp->i_type);
 		}
 	}
-
-	/* Don't account for regions with embedded ophdrs */
-	if (optype && headers > 0) {
-		headers--;
-		if (optype & XLOG_START_TRANS) {
-			ASSERT(headers >= 1);
-			headers--;
-		}
-	}
-
 	ticket->t_res_num_ophdrs += headers;
-	len += headers * sizeof(struct xlog_op_header);
 
 	return len;
 }
@@ -2296,7 +2341,6 @@ xlog_write_setup_ophdr(
 	struct xlog_op_header	*ophdr,
 	struct xlog_ticket	*ticket)
 {
-	ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
 	ophdr->oh_clientid = XFS_TRANSACTION;
 	ophdr->oh_res2 = 0;
 	ophdr->oh_flags = 0;
@@ -2514,21 +2558,25 @@ xlog_write(
 			ASSERT((unsigned long)ptr % sizeof(int32_t) == 0);
 
 			/*
-			 * The XLOG_START_TRANS has embedded ophdrs for the
-			 * start record and transaction header. They will always
-			 * be the first two regions in the lv chain. Commit and
-			 * unmount records also have embedded ophdrs.
+			 * Regions always have their ophdr at the start of the
+			 * region, except for:
+			 * - a transaction start which has a start record ophdr
+			 *   before the first region ophdr; and
+			 * - the previous region didn't fully fit into an iclog
+			 *   so needs a continuation ophdr to prepend the region
+			 *   in this new iclog.
 			 */
-			if (optype) {
-				ophdr = reg->i_addr;
-				if (index)
-					optype &= ~XLOG_START_TRANS;
-			} else {
+			ophdr = reg->i_addr;
+			if (optype && index) {
+				optype &= ~XLOG_START_TRANS;
+			} else if (partial_copy) {
                                 ophdr = xlog_write_setup_ophdr(ptr, ticket);
 				xlog_write_adv_cnt(&ptr, &len, &log_offset,
 					   sizeof(struct xlog_op_header));
 				added_ophdr = true;
 			}
+			ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
+
 			len += xlog_write_setup_copy(ticket, ophdr,
 						     iclog->ic_size-log_offset,
 						     reg->i_len,
@@ -2546,20 +2594,11 @@ xlog_write(
 				ophdr->oh_len = cpu_to_be32(copy_len -
 						sizeof(struct xlog_op_header));
 			}
-			/*
-			 * Copy region.
-			 *
-			 * Commit records just log an opheader, so
-			 * we can have empty payloads with no data region to
-			 * copy.  Hence we only copy the payload if the vector
-			 * says it has data to copy.
-			 */
-			ASSERT(copy_len >= 0);
-			if (copy_len > 0) {
-				memcpy(ptr, reg->i_addr + copy_off, copy_len);
-				xlog_write_adv_cnt(&ptr, &len, &log_offset,
-						   copy_len);
-			}
+
+			ASSERT(copy_len > 0);
+			memcpy(ptr, reg->i_addr + copy_off, copy_len);
+			xlog_write_adv_cnt(&ptr, &len, &log_offset, copy_len);
+
 			if (added_ophdr)
 				copy_len += sizeof(struct xlog_op_header);
 			record_cnt++;
fs/xfs/xfs_log.h +8 -34

52 lines not on this page · raw message

fs/xfs/xfs_log_cil.c +14 -11
index eb2aec8ac0c9..dc49b8072b9b 100644
@@ -181,13 +181,20 @@ xlog_cil_alloc_shadow_bufs(
 		}
 
 		/*
-		 * We 64-bit align the length of each iovec so that the start
-		 * of the next one is naturally aligned.  We'll need to
-		 * account for that slack space here. Then round nbytes up
-		 * to 64-bit alignment so that the initial buffer alignment is
-		 * easy to calculate and verify.
+		 * We 64-bit align the length of each iovec so that the start of
+		 * the next one is naturally aligned.  We'll need to account for
+		 * that slack space here.
+		 *
+		 * We also add the xlog_op_header to each region when
+		 * formatting, but that's not accounted to the size of the item
+		 * at this point. Hence we'll need an addition number of bytes
+		 * for each vector to hold an opheader.
+		 *
+		 * Then round nbytes up to 64-bit alignment so that the initial
+		 * buffer alignment is easy to calculate and verify.
 		 */
-		nbytes += niovecs * sizeof(uint64_t);
+		nbytes += niovecs *
+			(sizeof(uint64_t) + sizeof(struct xlog_op_header));
 		nbytes = round_up(nbytes, sizeof(uint64_t));
 
 		/*
@@ -441,11 +448,6 @@ xlog_cil_insert_items(
 
 	spin_lock(&cil->xc_cil_lock);
 
-	/* account for space used by new iovec headers  */
-	iovhdr_res = diff_iovecs * sizeof(xlog_op_header_t);
-	len += iovhdr_res;
-	ctx->nvecs += diff_iovecs;
-
 	/* attach the transaction to the CIL if it has any busy extents */
 	if (!list_empty(&tp->t_busy))
 		list_splice_init(&tp->t_busy, &ctx->busy_extents);
@@ -477,6 +479,7 @@ xlog_cil_insert_items(
 	}
 	tp->t_ticket->t_curr_res -= len;
 	ctx->space_used += len;
+	ctx->nvecs += diff_iovecs;
 
 	/*
 	 * If we've overrun the reservation, dump the tx details before we move
Signature · 1 line
2.33.0
Reviewed-by Reviewed-by Darrick J. Wong on v6 7/16
#12 lore raw

Re: [PATCH 07/16] xfs: reserve space and initialise xlog_op_header in item formatting

Having the code changes in the same commit as the move makes this really hard to review, so I had to split it. See below for the split version (which does not have properly updated commit logs). I'd much prefer to get the split version in, but the technical changes look fine either way:

From efdaedb01bd2e961616df1db09a6aad55139b114 Mon Sep 17 00:00:00 2001
From: Dave Chinner <[email protected]>
Date: Thu, 11 Nov 2021 09:04:16 +0100
Subject: xfs: move xlog_prepare_iovec out of line

---
 fs/xfs/xfs_log.c | 37 +++++++++++++++++++++++++++++++++++++
 fs/xfs/xfs_log.h | 36 ++----------------------------------
 2 files changed, 39 insertions(+), 34 deletions(-)
fs/xfs/xfs_log.c +37 -0
index f09663d3664be8..f17147c0fd2ff2 100644
@@ -90,6 +90,43 @@ xlog_iclogs_empty(
 static int
 xfs_log_cover(struct xfs_mount *);
 
+/*
+ * We need to make sure the buffer pointer returned is naturally aligned for the
+ * biggest basic data type we put into it. We have already accounted for this
+ * padding when sizing the buffer.
+ *
+ * However, this padding does not get written into the log, and hence we have to
+ * track the space used by the log vectors separately to prevent log space hangs
+ * due to inaccurate accounting (i.e. a leak) of the used log space through the
+ * CIL context ticket.
+ */
+void *
+xlog_prepare_iovec(
+	struct xfs_log_vec	*lv,
+	struct xfs_log_iovec	**vecp,
+	uint			type)
+{
+	struct xfs_log_iovec	*vec = *vecp;
+
+	if (vec) {
+		ASSERT(vec - lv->lv_iovecp < lv->lv_niovecs);
+		vec++;
+	} else {
+		vec = &lv->lv_iovecp[0];
+	}
+
+	if (!IS_ALIGNED(lv->lv_buf_len, sizeof(uint64_t)))
+		lv->lv_buf_len = round_up(lv->lv_buf_len, sizeof(uint64_t));
+
+	vec->i_type = type;
+	vec->i_addr = lv->lv_buf + lv->lv_buf_len;
+
+	ASSERT(IS_ALIGNED((unsigned long)vec->i_addr, sizeof(uint64_t)));
+
+	*vecp = vec;
+	return vec->i_addr;
+}
+
 static void
 xlog_grant_sub_space(
 	struct xlog		*log,
fs/xfs/xfs_log.h +2 -34
index d1fc434761667d..391adc36931885 100644
@@ -21,40 +21,8 @@ struct xfs_log_vec {
 
 #define XFS_LOG_VEC_ORDERED	(-1)
 
-/*
- * We need to make sure the buffer pointer returned is naturally aligned for the
- * biggest basic data type we put into it. We have already accounted for this
- * padding when sizing the buffer.
- *
- * However, this padding does not get written into the log, and hence we have to
- * track the space used by the log vectors separately to prevent log space hangs
- * due to inaccurate accounting (i.e. a leak) of the used log space through the
- * CIL context ticket.
- */
-static inline void *
-xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
-		uint type)
-{
-	struct xfs_log_iovec *vec = *vecp;
-
-	if (vec) {
-		ASSERT(vec - lv->lv_iovecp < lv->lv_niovecs);
-		vec++;
-	} else {
-		vec = &lv->lv_iovecp[0];
-	}
-
-	if (!IS_ALIGNED(lv->lv_buf_len, sizeof(uint64_t)))
-		lv->lv_buf_len = round_up(lv->lv_buf_len, sizeof(uint64_t));
-
-	vec->i_type = type;
-	vec->i_addr = lv->lv_buf + lv->lv_buf_len;
-
-	ASSERT(IS_ALIGNED((unsigned long)vec->i_addr, sizeof(uint64_t)));
-
-	*vecp = vec;
-	return vec->i_addr;
-}
+void *xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
+		uint type);
 
 static inline void
 xlog_finish_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec *vec, int len)
Signature · 1 line
2.30.2

From a87258e5cf9b44b5b16c520fced2524d479c7e71 Mon Sep 17 00:00:00 2001
From: Dave Chinner <[email protected]>
Date: Sun, 31 Oct 2021 03:35:55 +1100
Subject: xfs: reserve space and initialise xlog_op_header in item formatting

Current xlog_write() adds op headers to the log manually for every log item region that is in the vector passed to it. While xlog_write() needs to stamp the transaction ID into the ophdr, we already know it's length, flags, clientid, etc at CIL commit time.

This means the only time that xlog write really needs to format and reserve space for a new ophdr is when a region is split across two iclogs. Adding the opheader and accounting for it as part of the normal formatted item region means we simplify the accounting of space used by a transaction and we don't have to special case reserving of space in for the ophdrs in xlog_write(). It also means we can largely initialise the ophdr in transaction commit instead of xlog_write, making the xlog_write formatting inner loop much tighter.

xlog_prepare_iovec() is now too large to stay as an inline function, so we move it out of line and into xfs_log.c.

Object sizes:
text data bss dec hex filename
1125934 305951 484 1432369 15db31 fs/xfs/built-in.a.before
1123360 305951 484 1429795 15d123 fs/xfs/built-in.a.after

So the code is a roughly 2.5kB smaller with xlog_prepare_iovec() now out of line, even though it grew in size itself.

---
 fs/xfs/xfs_log.c     | 86 ++++++++++++++++++++++----------------------
 fs/xfs/xfs_log.h     |  6 ++++
 fs/xfs/xfs_log_cil.c | 25 +++++++------
 3 files changed, 64 insertions(+), 53 deletions(-)
fs/xfs/xfs_log.c +44 -42

147 lines not on this page · raw message

fs/xfs/xfs_log.h +6 -0
index 391adc36931885..f4b96991870d85 100644
@@ -27,6 +27,12 @@ void *xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
 static inline void
 xlog_finish_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec *vec, int len)
 {
+	struct xlog_op_header	*oph = vec->i_addr;
+
+	/* opheader tracks payload length, logvec tracks region length */
+	oph->oh_len = len;
+
+	len += sizeof(struct xlog_op_header);
 	lv->lv_buf_len += len;
 	lv->lv_bytes += len;
 	vec->i_len = len;
fs/xfs/xfs_log_cil.c +14 -11
index 75c40c7e34de61..103031f784d58d 100644
@@ -181,13 +181,20 @@ xlog_cil_alloc_shadow_bufs(
 		}
 
 		/*
-		 * We 64-bit align the length of each iovec so that the start
-		 * of the next one is naturally aligned.  We'll need to
-		 * account for that slack space here. Then round nbytes up
-		 * to 64-bit alignment so that the initial buffer alignment is
-		 * easy to calculate and verify.
+		 * We 64-bit align the length of each iovec so that the start of
+		 * the next one is naturally aligned.  We'll need to account for
+		 * that slack space here.
+		 *
+		 * We also add the xlog_op_header to each region when
+		 * formatting, but that's not accounted to the size of the item
+		 * at this point. Hence we'll need an addition number of bytes
+		 * for each vector to hold an opheader.
+		 *
+		 * Then round nbytes up to 64-bit alignment so that the initial
+		 * buffer alignment is easy to calculate and verify.
 		 */
-		nbytes += niovecs * sizeof(uint64_t);
+		nbytes += niovecs *
+			(sizeof(uint64_t) + sizeof(struct xlog_op_header));
 		nbytes = round_up(nbytes, sizeof(uint64_t));
 
 		/*
@@ -441,11 +448,6 @@ xlog_cil_insert_items(
 
 	spin_lock(&cil->xc_cil_lock);
 
-	/* account for space used by new iovec headers  */
-	iovhdr_res = diff_iovecs * sizeof(xlog_op_header_t);
-	len += iovhdr_res;
-	ctx->nvecs += diff_iovecs;
-
 	/* attach the transaction to the CIL if it has any busy extents */
 	if (!list_empty(&tp->t_busy))
 		list_splice_init(&tp->t_busy, &ctx->busy_extents);
@@ -477,6 +479,7 @@ xlog_cil_insert_items(
 	}
 	tp->t_ticket->t_curr_res -= len;
 	ctx->space_used += len;
+	ctx->nvecs += diff_iovecs;
 
 	/*
 	 * If we've overrun the reservation, dump the tx details before we move
Signature · 1 line
2.30.2
#13 lore raw

PATCH v6 8/16 xfs: log ticket region debug is largely useless

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

xlog_tic_add_region() is used to trace the regions being added to a log ticket to provide information in the situation where a ticket reservation overrun occurs. The information gathered is stored int the ticket, and dumped if xlog_print_tic_res() is called.

For a front end struct xfs_trans overrun, the ticket only contains reservation tracking information - the ticket is never handed to the log so has no regions attached to it. The overrun debug information in this case comes from xlog_print_trans(), which walks the items attached to the transaction and dumps their attached formatted log vectors directly. It also dumps the ticket state, but that only contains reservation accounting and nothing else. Hence xlog_print_tic_res() never dumps region or overrun information from this path.

xlog_tic_add_region() is actually called from xlog_write(), which means it is being used to track the regions seen in a CIL checkpoint log vector chain. In looking at CIL behaviour recently, I've seen 32MB checkpoints regularly exceed 250,000 regions in the LV chain. The log ticket debug code can track *15* regions. IOWs, if there is a ticket overrun in the CIL code, the ticket region tracking code is going to be completely useless for determining what went wrong. The only thing it can tell us is how much of an overrun occurred, and we really don't need extra debug information in the log ticket to tell us that.

Indeed, the main place we call xlog_tic_add_region() is also adding up the number of regions and the space used so that xlog_write() knows how much will be written to the log. This is exactly the same information that log ticket is storing once we take away the useless region tracking array. Hence xlog_tic_add_region() is not useful, but can be called 250,000 times a CIL push...

Just strip all that debug "information" out of the of the log ticket and only have it report reservation space information when an overrun occurs. This also reduces the size of a log ticket down by about 150 bytes...

---
 fs/xfs/xfs_log.c      | 107 +++---------------------------------------
 fs/xfs/xfs_log_priv.h |  20 --------
 2 files changed, 6 insertions(+), 121 deletions(-)
fs/xfs/xfs_log.c +6 -101
index 0923bee8d4e2..bd2e50804cb4 100644
@@ -378,30 +378,6 @@ xlog_grant_head_check(
 	return error;
 }
 
-static void
-xlog_tic_reset_res(xlog_ticket_t *tic)
-{
-	tic->t_res_num = 0;
-	tic->t_res_arr_sum = 0;
-	tic->t_res_num_ophdrs = 0;
-}
-
-static void
-xlog_tic_add_region(xlog_ticket_t *tic, uint len, uint type)
-{
-	if (tic->t_res_num == XLOG_TIC_LEN_MAX) {
-		/* add to overflow and start again */
-		tic->t_res_o_flow += tic->t_res_arr_sum;
-		tic->t_res_num = 0;
-		tic->t_res_arr_sum = 0;
-	}
-
-	tic->t_res_arr[tic->t_res_num].r_len = len;
-	tic->t_res_arr[tic->t_res_num].r_type = type;
-	tic->t_res_arr_sum += len;
-	tic->t_res_num++;
-}
-
 bool
 xfs_log_writable(
 	struct xfs_mount	*mp)
@@ -451,8 +427,6 @@ xfs_log_regrant(
 	xlog_grant_push_ail(log, tic->t_unit_res);
 
 	tic->t_curr_res = tic->t_unit_res;
-	xlog_tic_reset_res(tic);
-
 	if (tic->t_cnt > 0)
 		return 0;
 
@@ -2192,63 +2166,11 @@ xlog_print_tic_res(
 	struct xfs_mount	*mp,
 	struct xlog_ticket	*ticket)
 {
-	uint i;
-	uint ophdr_spc = ticket->t_res_num_ophdrs * (uint)sizeof(xlog_op_header_t);
-
-	/* match with XLOG_REG_TYPE_* in xfs_log.h */
-#define REG_TYPE_STR(type, str)	[XLOG_REG_TYPE_##type] = str
-	static char *res_type_str[] = {
-	    REG_TYPE_STR(BFORMAT, "bformat"),
-	    REG_TYPE_STR(BCHUNK, "bchunk"),
-	    REG_TYPE_STR(EFI_FORMAT, "efi_format"),
-	    REG_TYPE_STR(EFD_FORMAT, "efd_format"),
-	    REG_TYPE_STR(IFORMAT, "iformat"),
-	    REG_TYPE_STR(ICORE, "icore"),
-	    REG_TYPE_STR(IEXT, "iext"),
-	    REG_TYPE_STR(IBROOT, "ibroot"),
-	    REG_TYPE_STR(ILOCAL, "ilocal"),
-	    REG_TYPE_STR(IATTR_EXT, "iattr_ext"),
-	    REG_TYPE_STR(IATTR_BROOT, "iattr_broot"),
-	    REG_TYPE_STR(IATTR_LOCAL, "iattr_local"),
-	    REG_TYPE_STR(QFORMAT, "qformat"),
-	    REG_TYPE_STR(DQUOT, "dquot"),
-	    REG_TYPE_STR(QUOTAOFF, "quotaoff"),
-	    REG_TYPE_STR(LRHEADER, "LR header"),
-	    REG_TYPE_STR(UNMOUNT, "unmount"),
-	    REG_TYPE_STR(COMMIT, "commit"),
-	    REG_TYPE_STR(TRANSHDR, "trans header"),
-	    REG_TYPE_STR(ICREATE, "inode create"),
-	    REG_TYPE_STR(RUI_FORMAT, "rui_format"),
-	    REG_TYPE_STR(RUD_FORMAT, "rud_format"),
-	    REG_TYPE_STR(CUI_FORMAT, "cui_format"),
-	    REG_TYPE_STR(CUD_FORMAT, "cud_format"),
-	    REG_TYPE_STR(BUI_FORMAT, "bui_format"),
-	    REG_TYPE_STR(BUD_FORMAT, "bud_format"),
-	};
-	BUILD_BUG_ON(ARRAY_SIZE(res_type_str) != XLOG_REG_TYPE_MAX + 1);
-#undef REG_TYPE_STR
-
 	xfs_warn(mp, "ticket reservation summary:");
-	xfs_warn(mp, "  unit res    = %d bytes",
-		 ticket->t_unit_res);
-	xfs_warn(mp, "  current res = %d bytes",
-		 ticket->t_curr_res);
-	xfs_warn(mp, "  total reg   = %u bytes (o/flow = %u bytes)",
-		 ticket->t_res_arr_sum, ticket->t_res_o_flow);
-	xfs_warn(mp, "  ophdrs      = %u (ophdr space = %u bytes)",
-		 ticket->t_res_num_ophdrs, ophdr_spc);
-	xfs_warn(mp, "  ophdr + reg = %u bytes",
-		 ticket->t_res_arr_sum + ticket->t_res_o_flow + ophdr_spc);
-	xfs_warn(mp, "  num regions = %u",
-		 ticket->t_res_num);
-
-	for (i = 0; i < ticket->t_res_num; i++) {
-		uint r_type = ticket->t_res_arr[i].r_type;
-		xfs_warn(mp, "region[%u]: %s - %u bytes", i,
-			    ((r_type <= 0 || r_type > XLOG_REG_TYPE_MAX) ?
-			    "bad-rtype" : res_type_str[r_type]),
-			    ticket->t_res_arr[i].r_len);
-	}
+	xfs_warn(mp, "  unit res    = %d bytes", ticket->t_unit_res);
+	xfs_warn(mp, "  current res = %d bytes", ticket->t_curr_res);
+	xfs_warn(mp, "  original count  = %d", ticket->t_ocnt);
+	xfs_warn(mp, "  remaining count = %d", ticket->t_cnt);
 }
 
 /*
@@ -2313,7 +2235,6 @@ xlog_write_calc_vec_length(
 	uint			optype)
 {
 	struct xfs_log_vec	*lv;
-	int			headers = 0;
 	int			len = 0;
 	int			i;
 
@@ -2322,17 +2243,9 @@ xlog_write_calc_vec_length(
 		if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED)
 			continue;
 
-		headers += lv->lv_niovecs;
-
-		for (i = 0; i < lv->lv_niovecs; i++) {
-			struct xfs_log_iovec	*vecp = &lv->lv_iovecp[i];
-
-			len += vecp->i_len;
-			xlog_tic_add_region(ticket, vecp->i_len, vecp->i_type);
-		}
+		for (i = 0; i < lv->lv_niovecs; i++)
+			len += lv->lv_iovecp[i].i_len;
 	}
-	ticket->t_res_num_ophdrs += headers;
-
 	return len;
 }
 
@@ -2391,7 +2304,6 @@ xlog_write_setup_copy(
 
 	/* account for new log op header */
 	ticket->t_curr_res -= sizeof(struct xlog_op_header);
-	ticket->t_res_num_ophdrs++;
 
 	return sizeof(struct xlog_op_header);
 }
@@ -3039,9 +2951,6 @@ xlog_state_get_iclog_space(
 	 */
 	if (log_offset == 0) {
 		ticket->t_curr_res -= log->l_iclog_hsize;
-		xlog_tic_add_region(ticket,
-				    log->l_iclog_hsize,
-				    XLOG_REG_TYPE_LRHEADER);
 		head->h_cycle = cpu_to_be32(log->l_curr_cycle);
 		head->h_lsn = cpu_to_be64(
 			xlog_assign_lsn(log->l_curr_cycle, log->l_curr_block));
@@ -3121,7 +3030,6 @@ xfs_log_ticket_regrant(
 	xlog_grant_sub_space(log, &log->l_write_head.grant,
 					ticket->t_curr_res);
 	ticket->t_curr_res = ticket->t_unit_res;
-	xlog_tic_reset_res(ticket);
 
 	trace_xfs_log_ticket_regrant_sub(log, ticket);
 
@@ -3132,7 +3040,6 @@ xfs_log_ticket_regrant(
 		trace_xfs_log_ticket_regrant_exit(log, ticket);
 
 		ticket->t_curr_res = ticket->t_unit_res;
-		xlog_tic_reset_res(ticket);
 	}
 
 	xfs_log_ticket_put(ticket);
@@ -3642,8 +3549,6 @@ xlog_ticket_alloc(
 	if (permanent)
 		tic->t_flags |= XLOG_TIC_PERM_RESERV;
 
-	xlog_tic_reset_res(tic);
-
 	return tic;
 }
 
fs/xfs/xfs_log_priv.h +0 -20
index 65fb97d596dd..47165c4d2a49 100644
@@ -142,19 +142,6 @@ enum xlog_iclog_state {
 
 #define XLOG_COVER_OPS		5
 
-/* Ticket reservation region accounting */ 
-#define XLOG_TIC_LEN_MAX	15
-
-/*
- * Reservation region
- * As would be stored in xfs_log_iovec but without the i_addr which
- * we don't care about.
- */
-typedef struct xlog_res {
-	uint	r_len;	/* region length		:4 */
-	uint	r_type;	/* region's transaction type	:4 */
-} xlog_res_t;
-
 typedef struct xlog_ticket {
 	struct list_head   t_queue;	 /* reserve/write queue */
 	struct task_struct *t_task;	 /* task that owns this ticket */
@@ -165,13 +152,6 @@ typedef struct xlog_ticket {
 	char		   t_ocnt;	 /* original count		 : 1  */
 	char		   t_cnt;	 /* current count		 : 1  */
 	char		   t_flags;	 /* properties of reservation	 : 1  */
-
-        /* reservation array fields */
-	uint		   t_res_num;                    /* num in array : 4 */
-	uint		   t_res_num_ophdrs;		 /* num op hdrs  : 4 */
-	uint		   t_res_arr_sum;		 /* array sum    : 4 */
-	uint		   t_res_o_flow;		 /* sum overflow : 4 */
-	xlog_res_t	   t_res_arr[XLOG_TIC_LEN_MAX];  /* array of res : 8 * 15 */ 
 } xlog_ticket_t;
 
 /*
Signature · 1 line
2.33.0
#14 lore raw

PATCH v6 9/16 xfs: pass lv chain length into xlog_write()

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

The caller of xlog_write() usually has a close accounting of the aggregated vector length contained in the log vector chain passed to xlog_write(). There is no need to iterate the chain to calculate he length of the data in xlog_write_calculate_len() if the caller is already iterating that chain to build it.

Passing in the vector length avoids doing an extra chain iteration, which can be a significant amount of work given that large CIL commits can have hundreds of thousands of vectors attached to the chain.

---
 fs/xfs/xfs_log.c      | 35 +++++------------------------------
 fs/xfs/xfs_log_cil.c  | 25 +++++++++++++++++--------
 fs/xfs/xfs_log_priv.h |  2 +-
 3 files changed, 23 insertions(+), 39 deletions(-)
fs/xfs/xfs_log.c +5 -30
index bd2e50804cb4..76d5a743f6fb 100644
@@ -972,7 +972,8 @@ xlog_write_unmount_record(
 	/* account for space used by record data */
 	ticket->t_curr_res -= sizeof(unmount_rec);
 
-	return xlog_write(log, NULL, &vec, ticket, XLOG_UNMOUNT_TRANS);
+	return xlog_write(log, NULL, &vec, ticket, XLOG_UNMOUNT_TRANS,
+			reg.i_len);
 }
 
 /*
@@ -2223,32 +2224,6 @@ xlog_print_trans(
 	}
 }
 
-/*
- * Calculate the potential space needed by the log vector. All regions contain
- * their own opheaders and they are accounted for in region space so we don't
- * need to add them to the vector length here.
- */
-static int
-xlog_write_calc_vec_length(
-	struct xlog_ticket	*ticket,
-	struct xfs_log_vec	*log_vector,
-	uint			optype)
-{
-	struct xfs_log_vec	*lv;
-	int			len = 0;
-	int			i;
-
-	for (lv = log_vector; lv; lv = lv->lv_next) {
-		/* we don't write ordered log vectors */
-		if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED)
-			continue;
-
-		for (i = 0; i < lv->lv_niovecs; i++)
-			len += lv->lv_iovecp[i].i_len;
-	}
-	return len;
-}
-
 static xlog_op_header_t *
 xlog_write_setup_ophdr(
 	struct xlog_op_header	*ophdr,
@@ -2402,13 +2377,14 @@ xlog_write(
 	struct xfs_cil_ctx	*ctx,
 	struct xfs_log_vec	*log_vector,
 	struct xlog_ticket	*ticket,
-	uint			optype)
+	uint			optype,
+	uint32_t		len)
+
 {
 	struct xlog_in_core	*iclog = NULL;
 	struct xfs_log_vec	*lv = log_vector;
 	struct xfs_log_iovec	*vecp = lv->lv_iovecp;
 	int			index = 0;
-	int			len;
 	int			partial_copy = 0;
 	int			partial_copy_len = 0;
 	int			contwr = 0;
@@ -2423,7 +2399,6 @@ xlog_write(
 		xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
 	}
 
-	len = xlog_write_calc_vec_length(ticket, log_vector, optype);
 	while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
 		void		*ptr;
 		int		log_offset;
fs/xfs/xfs_log_cil.c +17 -8
index dc49b8072b9b..00243939b220 100644
@@ -791,7 +791,8 @@ xlog_cil_order_write(
 static int
 xlog_cil_write_chain(
 	struct xfs_cil_ctx	*ctx,
-	struct xfs_log_vec	*chain)
+	struct xfs_log_vec	*chain,
+	uint32_t		chain_len)
 {
 	struct xlog		*log = ctx->cil->xc_log;
 	int			error;
@@ -799,7 +800,8 @@ xlog_cil_write_chain(
 	error = xlog_cil_order_write(ctx->cil, ctx->sequence, _START_RECORD);
 	if (error)
 		return error;
-	return xlog_write(log, ctx, chain, ctx->ticket, XLOG_START_TRANS);
+	return xlog_write(log, ctx, chain, ctx->ticket, XLOG_START_TRANS,
+			chain_len);
 }
 
 /*
@@ -838,7 +840,8 @@ xlog_cil_write_commit_record(
 
 	/* account for space used by record data */
 	ctx->ticket->t_curr_res -= reg.i_len;
-	error = xlog_write(log, ctx, &vec, ctx->ticket, XLOG_COMMIT_TRANS);
+	error = xlog_write(log, ctx, &vec, ctx->ticket, XLOG_COMMIT_TRANS,
+			reg.i_len);
 	if (error)
 		xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
 	return error;
@@ -900,11 +903,12 @@ xlog_cil_build_trans_hdr(
 				sizeof(struct xfs_trans_header);
 	hdr->lhdr[1].i_type = XLOG_REG_TYPE_TRANSHDR;
 
-	tic->t_curr_res -= hdr->lhdr[0].i_len + hdr->lhdr[1].i_len;
-
 	lvhdr->lv_niovecs = 2;
 	lvhdr->lv_iovecp = &hdr->lhdr[0];
+	lvhdr->lv_bytes = hdr->lhdr[0].i_len + hdr->lhdr[1].i_len;
 	lvhdr->lv_next = ctx->lv_chain;
+
+	tic->t_curr_res -= lvhdr->lv_bytes;
 }
 
 /*
@@ -931,7 +935,8 @@ xlog_cil_push_work(
 	struct xlog		*log = cil->xc_log;
 	struct xfs_log_vec	*lv;
 	struct xfs_cil_ctx	*new_ctx;
-	int			num_iovecs;
+	int			num_iovecs = 0;
+	int			num_bytes = 0;
 	int			error = 0;
 	struct xlog_cil_trans_hdr thdr;
 	struct xfs_log_vec	lvhdr = { NULL };
@@ -1032,7 +1037,6 @@ xlog_cil_push_work(
 	 * by the flush lock.
 	 */
 	lv = NULL;
-	num_iovecs = 0;
 	while (!list_empty(&cil->xc_cil)) {
 		struct xfs_log_item	*item;
 
@@ -1046,6 +1050,10 @@ xlog_cil_push_work(
 		lv = item->li_lv;
 		item->li_lv = NULL;
 		num_iovecs += lv->lv_niovecs;
+
+		/* we don't write ordered log vectors */
+		if (lv->lv_buf_len != XFS_LOG_VEC_ORDERED)
+			num_bytes += lv->lv_bytes;
 	}
 
 	/*
@@ -1084,6 +1092,7 @@ xlog_cil_push_work(
 	 * transaction header here as it is not accounted for in xlog_write().
 	 */
 	xlog_cil_build_trans_hdr(ctx, &thdr, &lvhdr, num_iovecs);
+	num_bytes += lvhdr.lv_bytes;
 
 	/*
 	 * Before we format and submit the first iclog, we have to ensure that
@@ -1091,7 +1100,7 @@ xlog_cil_push_work(
 	 */
 	wait_for_completion(&bdev_flush);
 
-	error = xlog_cil_write_chain(ctx, &lvhdr);
+	error = xlog_cil_write_chain(ctx, &lvhdr, num_bytes);
 	if (error)
 		goto out_abort_free_ticket;
 
fs/xfs/xfs_log_priv.h +1 -1
index 47165c4d2a49..56df86d62430 100644
@@ -492,7 +492,7 @@ void	xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
 void	xlog_print_trans(struct xfs_trans *);
 int	xlog_write(struct xlog *log, struct xfs_cil_ctx *ctx,
 		struct xfs_log_vec *log_vector, struct xlog_ticket *tic,
-		uint optype);
+		uint optype, uint32_t len);
 void	xfs_log_ticket_ungrant(struct xlog *log, struct xlog_ticket *ticket);
 void	xfs_log_ticket_regrant(struct xlog *log, struct xlog_ticket *ticket);
 
Signature · 1 line
2.33.0
#16 lore raw

PATCH v6 10/16 xfs: change the type of ic_datap

In reply to Dave Chinner

From: Christoph Hellwig <[email protected]>

Turn ic_datap from a char into a void pointer given that it points to arbitrary data.

[dgc: also remove (char *) cast in xlog_alloc_log()]
---
 fs/xfs/xfs_log.c      | 7 +++----
 fs/xfs/xfs_log_priv.h | 2 +-
 2 files changed, 4 insertions(+), 5 deletions(-)
fs/xfs/xfs_log.c +3 -4
index 76d5a743f6fb..f26c85dbc765 100644
@@ -1658,7 +1658,7 @@ xlog_alloc_log(
 		iclog->ic_log = log;
 		atomic_set(&iclog->ic_refcnt, 0);
 		INIT_LIST_HEAD(&iclog->ic_callbacks);
-		iclog->ic_datap = (char *)iclog->ic_data + log->l_iclog_hsize;
+		iclog->ic_datap = (void *)iclog->ic_data + log->l_iclog_hsize;
 
 		init_waitqueue_head(&iclog->ic_force_wait);
 		init_waitqueue_head(&iclog->ic_write_wait);
@@ -3678,7 +3678,7 @@ xlog_verify_iclog(
 		if (field_offset & 0x1ff) {
 			clientid = ophead->oh_clientid;
 		} else {
-			idx = BTOBBT((char *)&ophead->oh_clientid - iclog->ic_datap);
+			idx = BTOBBT((void *)&ophead->oh_clientid - iclog->ic_datap);
 			if (idx >= (XLOG_HEADER_CYCLE_SIZE / BBSIZE)) {
 				j = idx / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
 				k = idx % (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
@@ -3701,8 +3701,7 @@ xlog_verify_iclog(
 		if (field_offset & 0x1ff) {
 			op_len = be32_to_cpu(ophead->oh_len);
 		} else {
-			idx = BTOBBT((uintptr_t)&ophead->oh_len -
-				    (uintptr_t)iclog->ic_datap);
+			idx = BTOBBT((void *)&ophead->oh_len - iclog->ic_datap);
 			if (idx >= (XLOG_HEADER_CYCLE_SIZE / BBSIZE)) {
 				j = idx / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
 				k = idx % (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
fs/xfs/xfs_log_priv.h +1 -1
index 56df86d62430..51254d7f38d6 100644
@@ -190,7 +190,7 @@ typedef struct xlog_in_core {
 	u32			ic_offset;
 	enum xlog_iclog_state	ic_state;
 	unsigned int		ic_flags;
-	char			*ic_datap;	/* pointer to iclog data */
+	void			*ic_datap;	/* pointer to iclog data */
 	struct list_head	ic_callbacks;
 
 	/* reference counts need their own cacheline */
Signature · 1 line
2.33.0
Reviewed-by on v6 10/16
#17 lore raw

Re: [PATCH 10/16] xfs: change the type of ic_datap

Quoted 10 lines · Dave Chinner

From: Christoph Hellwig <[email protected]>

Turn ic_datap from a char into a void pointer given that it points to arbitrary data.

[dgc: also remove (char *) cast in xlog_alloc_log()]

Gosh, I actually like the syntax highlighting in lore for reading patches.

--D

Quoted 53 lines
---
 fs/xfs/xfs_log.c      | 7 +++----
 fs/xfs/xfs_log_priv.h | 2 +-
 2 files changed, 4 insertions(+), 5 deletions(-)
fs/xfs/xfs_log.c +3 -4
index 76d5a743f6fb..f26c85dbc765 100644
@@ -1658,7 +1658,7 @@ xlog_alloc_log(
 		iclog->ic_log = log;
 		atomic_set(&iclog->ic_refcnt, 0);
 		INIT_LIST_HEAD(&iclog->ic_callbacks);
-		iclog->ic_datap = (char *)iclog->ic_data + log->l_iclog_hsize;
+		iclog->ic_datap = (void *)iclog->ic_data + log->l_iclog_hsize;
 
 		init_waitqueue_head(&iclog->ic_force_wait);
 		init_waitqueue_head(&iclog->ic_write_wait);
@@ -3678,7 +3678,7 @@ xlog_verify_iclog(
 		if (field_offset & 0x1ff) {
 			clientid = ophead->oh_clientid;
 		} else {
-			idx = BTOBBT((char *)&ophead->oh_clientid - iclog->ic_datap);
+			idx = BTOBBT((void *)&ophead->oh_clientid - iclog->ic_datap);
 			if (idx >= (XLOG_HEADER_CYCLE_SIZE / BBSIZE)) {
 				j = idx / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
 				k = idx % (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
@@ -3701,8 +3701,7 @@ xlog_verify_iclog(
 		if (field_offset & 0x1ff) {
 			op_len = be32_to_cpu(ophead->oh_len);
 		} else {
-			idx = BTOBBT((uintptr_t)&ophead->oh_len -
-				    (uintptr_t)iclog->ic_datap);
+			idx = BTOBBT((void *)&ophead->oh_len - iclog->ic_datap);
 			if (idx >= (XLOG_HEADER_CYCLE_SIZE / BBSIZE)) {
 				j = idx / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
 				k = idx % (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
fs/xfs/xfs_log_priv.h +1 -1
index 56df86d62430..51254d7f38d6 100644
@@ -190,7 +190,7 @@ typedef struct xlog_in_core {
 	u32			ic_offset;
 	enum xlog_iclog_state	ic_state;
 	unsigned int		ic_flags;
-	char			*ic_datap;	/* pointer to iclog data */
+	void			*ic_datap;	/* pointer to iclog data */
 	struct list_head	ic_callbacks;
 
 	/* reference counts need their own cacheline */
Signature · 1 line
2.33.0
#18 lore raw

PATCH v6 11/16 xfs: introduce xlog_write_full()

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

Introduce an optimised version of xlog_write() that is used when the entire write will fit in a single iclog. This greatly simplifies the implementation of writing a log vector chain into an iclog, and sets the ground work for a much more understandable xlog_write() implementation.

This incorporates some factoring and simplifications proposed by Christoph Hellwig.

---
 fs/xfs/xfs_log.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 68 insertions(+), 3 deletions(-)
fs/xfs/xfs_log.c +68 -3
index f26c85dbc765..44134f8e699c 100644
@@ -2224,6 +2224,60 @@ xlog_print_trans(
 	}
 }
 
+static inline void
+xlog_write_iovec(
+	struct xlog_in_core	*iclog,
+	uint32_t		*log_offset,
+	void			*data,
+	uint32_t		write_len,
+	int			*bytes_left,
+	uint32_t		*record_cnt,
+	uint32_t		*data_cnt)
+{
+	ASSERT(*log_offset % sizeof(int32_t) == 0);
+	ASSERT(write_len % sizeof(int32_t) == 0);
+
+	memcpy(iclog->ic_datap + *log_offset, data, write_len);
+	*log_offset += write_len;
+	*bytes_left -= write_len;
+	(*record_cnt)++;
+	*data_cnt += write_len;
+}
+
+/*
+ * Write log vectors into a single iclog which is guaranteed by the caller
+ * to have enough space to write the entire log vector into.
+ */
+static void
+xlog_write_full(
+	struct xfs_log_vec	*lv,
+	struct xlog_ticket	*ticket,
+	struct xlog_in_core	*iclog,
+	uint32_t		*log_offset,
+	uint32_t		*len,
+	uint32_t		*record_cnt,
+	uint32_t		*data_cnt)
+{
+	int			index;
+
+	ASSERT(*log_offset + *len <= iclog->ic_size);
+
+	/*
+	 * Ordered log vectors have no regions to write so this
+	 * loop will naturally skip them.
+	 */
+	for (index = 0; index < lv->lv_niovecs; index++) {
+		struct xfs_log_iovec	*reg = &lv->lv_iovecp[index];
+		struct xlog_op_header	*ophdr = reg->i_addr;
+
+		ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
+		ophdr->oh_len = cpu_to_be32(reg->i_len -
+					sizeof(struct xlog_op_header));
+		xlog_write_iovec(iclog, log_offset, reg->i_addr,
+				reg->i_len, len, record_cnt, data_cnt);
+	}
+}
+
 static xlog_op_header_t *
 xlog_write_setup_ophdr(
 	struct xlog_op_header	*ophdr,
@@ -2388,8 +2442,8 @@ xlog_write(
 	int			partial_copy = 0;
 	int			partial_copy_len = 0;
 	int			contwr = 0;
-	int			record_cnt = 0;
-	int			data_cnt = 0;
+	uint32_t		record_cnt = 0;
+	uint32_t		data_cnt = 0;
 	int			error = 0;
 
 	if (ticket->t_curr_res < 0) {
@@ -2409,7 +2463,6 @@ xlog_write(
 			return error;
 
 		ASSERT(log_offset <= iclog->ic_size - 1);
-		ptr = iclog->ic_datap + log_offset;
 
 		/*
 		 * If we have a context pointer, pass it the first iclog we are
@@ -2421,10 +2474,22 @@ xlog_write(
 			ctx = NULL;
 		}
 
+		/* If this is a single iclog write, go fast... */
+		if (!contwr && lv == log_vector) {
+			while (lv) {
+				xlog_write_full(lv, ticket, iclog, &log_offset,
+						 &len, &record_cnt, &data_cnt);
+				lv = lv->lv_next;
+			}
+			data_cnt = 0;
+			break;
+		}
+
 		/*
 		 * This loop writes out as many regions as can fit in the amount
 		 * of space which was allocated by xlog_state_get_iclog_space().
 		 */
+		ptr = iclog->ic_datap + log_offset;
 		while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
 			struct xfs_log_iovec	*reg;
 			struct xlog_op_header	*ophdr;
Signature · 1 line
2.33.0
Reviewed-by on v6 11/16
#20 lore raw

Re: [PATCH 11/16] xfs: introduce xlog_write_full()

In reply to Dave Chinner
Quoted 8 lines · Dave Chinner

From: Dave Chinner <[email protected]>

Introduce an optimised version of xlog_write() that is used when the entire write will fit in a single iclog. This greatly simplifies the implementation of writing a log vector chain into an iclog, and sets the ground work for a much more understandable xlog_write() implementation.

Quoted 4 lines

This incorporates some factoring and simplifications proposed by Christoph Hellwig.

Looks cleaner than last time... :)

--D

Quoted 114 lines
---
 fs/xfs/xfs_log.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 68 insertions(+), 3 deletions(-)
fs/xfs/xfs_log.c +68 -3
index f26c85dbc765..44134f8e699c 100644
@@ -2224,6 +2224,60 @@ xlog_print_trans(
 	}
 }
 
+static inline void
+xlog_write_iovec(
+	struct xlog_in_core	*iclog,
+	uint32_t		*log_offset,
+	void			*data,
+	uint32_t		write_len,
+	int			*bytes_left,
+	uint32_t		*record_cnt,
+	uint32_t		*data_cnt)
+{
+	ASSERT(*log_offset % sizeof(int32_t) == 0);
+	ASSERT(write_len % sizeof(int32_t) == 0);
+
+	memcpy(iclog->ic_datap + *log_offset, data, write_len);
+	*log_offset += write_len;
+	*bytes_left -= write_len;
+	(*record_cnt)++;
+	*data_cnt += write_len;
+}
+
+/*
+ * Write log vectors into a single iclog which is guaranteed by the caller
+ * to have enough space to write the entire log vector into.
+ */
+static void
+xlog_write_full(
+	struct xfs_log_vec	*lv,
+	struct xlog_ticket	*ticket,
+	struct xlog_in_core	*iclog,
+	uint32_t		*log_offset,
+	uint32_t		*len,
+	uint32_t		*record_cnt,
+	uint32_t		*data_cnt)
+{
+	int			index;
+
+	ASSERT(*log_offset + *len <= iclog->ic_size);
+
+	/*
+	 * Ordered log vectors have no regions to write so this
+	 * loop will naturally skip them.
+	 */
+	for (index = 0; index < lv->lv_niovecs; index++) {
+		struct xfs_log_iovec	*reg = &lv->lv_iovecp[index];
+		struct xlog_op_header	*ophdr = reg->i_addr;
+
+		ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
+		ophdr->oh_len = cpu_to_be32(reg->i_len -
+					sizeof(struct xlog_op_header));
+		xlog_write_iovec(iclog, log_offset, reg->i_addr,
+				reg->i_len, len, record_cnt, data_cnt);
+	}
+}
+
 static xlog_op_header_t *
 xlog_write_setup_ophdr(
 	struct xlog_op_header	*ophdr,
@@ -2388,8 +2442,8 @@ xlog_write(
 	int			partial_copy = 0;
 	int			partial_copy_len = 0;
 	int			contwr = 0;
-	int			record_cnt = 0;
-	int			data_cnt = 0;
+	uint32_t		record_cnt = 0;
+	uint32_t		data_cnt = 0;
 	int			error = 0;
 
 	if (ticket->t_curr_res < 0) {
@@ -2409,7 +2463,6 @@ xlog_write(
 			return error;
 
 		ASSERT(log_offset <= iclog->ic_size - 1);
-		ptr = iclog->ic_datap + log_offset;
 
 		/*
 		 * If we have a context pointer, pass it the first iclog we are
@@ -2421,10 +2474,22 @@ xlog_write(
 			ctx = NULL;
 		}
 
+		/* If this is a single iclog write, go fast... */
+		if (!contwr && lv == log_vector) {
+			while (lv) {
+				xlog_write_full(lv, ticket, iclog, &log_offset,
+						 &len, &record_cnt, &data_cnt);
+				lv = lv->lv_next;
+			}
+			data_cnt = 0;
+			break;
+		}
+
 		/*
 		 * This loop writes out as many regions as can fit in the amount
 		 * of space which was allocated by xlog_state_get_iclog_space().
 		 */
+		ptr = iclog->ic_datap + log_offset;
 		while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
 			struct xfs_log_iovec	*reg;
 			struct xlog_op_header	*ophdr;
Signature · 1 line
2.33.0
#21 lore raw

PATCH v6 12/16 xfs:_introduce xlog_write_partial()

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

Re-implement writing of a log vector that does not fit into the current iclog. The iclog will already be in XLOG_STATE_WANT_SYNC because xlog_get_iclog_space() will have reserved all the remaining iclog space for us, hence we can simply iterate over the iovecs in the log vector getting more iclog space until the entire log vector is written.

handling this partial write case separately means we do need to pass unnecessary state around for the common, fast path case when the log vector fits entirely within the current iclog. It isolates the complexity and allows us to modify and improve the partial write case without impacting the simple fast path.

This change includes several improvements incorporated from patches written by Christoph Hellwig.

---
 fs/xfs/xfs_log.c      | 424 +++++++++++++++++++-----------------------
 fs/xfs/xfs_log_priv.h |   8 -
 2 files changed, 196 insertions(+), 236 deletions(-)
fs/xfs/xfs_log.c +196 -228
index 44134f8e699c..02db5a712e76 100644
@@ -2260,7 +2260,8 @@ xlog_write_full(
 {
 	int			index;
 
-	ASSERT(*log_offset + *len <= iclog->ic_size);
+	ASSERT(*log_offset + *len <= iclog->ic_size ||
+		iclog->ic_state == XLOG_STATE_WANT_SYNC);
 
 	/*
 	 * Ordered log vectors have no regions to write so this
@@ -2278,111 +2279,177 @@ xlog_write_full(
 	}
 }
 
-static xlog_op_header_t *
-xlog_write_setup_ophdr(
-	struct xlog_op_header	*ophdr,
-	struct xlog_ticket	*ticket)
+static int
+xlog_write_get_more_iclog_space(
+	struct xlog_ticket	*ticket,
+	struct xlog_in_core	**iclogp,
+	uint32_t		*log_offset,
+	uint32_t		len,
+	uint32_t		*record_cnt,
+	uint32_t		*data_cnt,
+	int			*contwr)
 {
-	ophdr->oh_clientid = XFS_TRANSACTION;
-	ophdr->oh_res2 = 0;
-	ophdr->oh_flags = 0;
-	return ophdr;
+	struct xlog_in_core	*iclog = *iclogp;
+	struct xlog		*log = iclog->ic_log;
+	int			error;
+
+	spin_lock(&log->l_icloglock);
+	ASSERT(iclog->ic_state == XLOG_STATE_WANT_SYNC);
+	xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt);
+	error = xlog_state_release_iclog(log, iclog, 0);
+	spin_unlock(&log->l_icloglock);
+	if (error)
+		return error;
+
+	error = xlog_state_get_iclog_space(log, len, &iclog,
+				ticket, contwr, log_offset);
+	if (error)
+		return error;
+	*record_cnt = 0;
+	*data_cnt = 0;
+	*iclogp = iclog;
+	return 0;
 }
 
 /*
- * Set up the parameters of the region copy into the log. This has
- * to handle region write split across multiple log buffers - this
- * state is kept external to this function so that this code can
- * be written in an obvious, self documenting manner.
+ * Write log vectors into a single iclog which is smaller than the current chain
+ * length. We write until we cannot fit a full record into the remaining space
+ * and then stop. We return the log vector that is to be written that cannot
+ * wholly fit in the iclog.
  */
 static int
-xlog_write_setup_copy(
+xlog_write_partial(
+	struct xfs_log_vec	*lv,
 	struct xlog_ticket	*ticket,
-	struct xlog_op_header	*ophdr,
-	int			space_available,
-	int			space_required,
-	int			*copy_off,
-	int			*copy_len,
-	int			*last_was_partial_copy,
-	int			*bytes_consumed)
-{
-	int			still_to_copy;
-
-	still_to_copy = space_required - *bytes_consumed;
-	*copy_off = *bytes_consumed;
-
-	if (still_to_copy <= space_available) {
-		/* write of region completes here */
-		*copy_len = still_to_copy;
-		ophdr->oh_len = cpu_to_be32(*copy_len);
-		if (*last_was_partial_copy)
-			ophdr->oh_flags |= (XLOG_END_TRANS|XLOG_WAS_CONT_TRANS);
-		*last_was_partial_copy = 0;
-		*bytes_consumed = 0;
-		return 0;
-	}
+	struct xlog_in_core	**iclogp,
+	uint32_t		*log_offset,
+	uint32_t		*len,
+	uint32_t		*record_cnt,
+	uint32_t		*data_cnt,
+	int			*contwr)
+{
+	struct xlog_in_core	*iclog = *iclogp;
+	struct xlog		*log = iclog->ic_log;
+	struct xlog_op_header	*ophdr;
+	int			index = 0;
+	uint32_t		rlen;
+	int			error;
 
-	/* partial write of region, needs extra log op header reservation */
-	*copy_len = space_available;
-	ophdr->oh_len = cpu_to_be32(*copy_len);
-	ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
-	if (*last_was_partial_copy)
-		ophdr->oh_flags |= XLOG_WAS_CONT_TRANS;
-	*bytes_consumed += *copy_len;
-	(*last_was_partial_copy)++;
+	/* walk the logvec, copying until we run out of space in the iclog */
+	for (index = 0; index < lv->lv_niovecs; index++) {
+		struct xfs_log_iovec	*reg = &lv->lv_iovecp[index];
+		uint32_t		reg_offset = 0;
 
-	/* account for new log op header */
-	ticket->t_curr_res -= sizeof(struct xlog_op_header);
+		/*
+		 * The first region of a continuation must have a non-zero
+		 * length otherwise log recovery will just skip over it and
+		 * start recovering from the next opheader it finds. Because we
+		 * mark the next opheader as a continuation, recovery will then
+		 * incorrectly add the continuation to the previous region and
+		 * that breaks stuff.
+		 *
+		 * Hence if there isn't space for region data after the
+		 * opheader, then we need to start afresh with a new iclog.
+		 */
+		if (iclog->ic_size - *log_offset <=
+					sizeof(struct xlog_op_header)) {
+			error = xlog_write_get_more_iclog_space(ticket,
+					&iclog, log_offset, *len, record_cnt,
+					data_cnt, contwr);
+			if (error)
+				return error;
+		}
 
-	return sizeof(struct xlog_op_header);
-}
+		ophdr = reg->i_addr;
+		rlen = min_t(uint32_t, reg->i_len, iclog->ic_size - *log_offset);
 
-static int
-xlog_write_copy_finish(
-	struct xlog		*log,
-	struct xlog_in_core	*iclog,
-	uint			flags,
-	int			*record_cnt,
-	int			*data_cnt,
-	int			*partial_copy,
-	int			*partial_copy_len,
-	int			log_offset)
-{
-	int			error;
+		ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
+		ophdr->oh_len = cpu_to_be32(rlen - sizeof(struct xlog_op_header));
+		if (rlen != reg->i_len)
+			ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
+
+		xlog_verify_dest_ptr(log, iclog->ic_datap + *log_offset);
+		xlog_write_iovec(iclog, log_offset, reg->i_addr,
+				rlen, len, record_cnt, data_cnt);
+
+		/* If we wrote the whole region, move to the next. */
+		if (rlen == reg->i_len)
+			continue;
 
-	if (*partial_copy) {
 		/*
-		 * This iclog has already been marked WANT_SYNC by
-		 * xlog_state_get_iclog_space.
+		 * We now have a partially written iovec, but it can span
+		 * multiple iclogs so we loop here. First we release the iclog
+		 * we currently have, then we get a new iclog and add a new
+		 * opheader. Then we continue copying from where we were until
+		 * we either complete the iovec or fill the iclog. If we
+		 * complete the iovec, then we increment the index and go right
+		 * back to the top of the outer loop. if we fill the iclog, we
+		 * run the inner loop again.
+		 *
+		 * This is complicated by the tail of a region using all the
+		 * space in an iclog and hence requiring us to release the iclog
+		 * and get a new one before returning to the outer loop. We must
+		 * always guarantee that we exit this inner loop with at least
+		 * space for log transaction opheaders left in the current
+		 * iclog, hence we cannot just terminate the loop at the end
+		 * of the of the continuation. So we loop while there is no
+		 * space left in the current iclog, and check for the end of the
+		 * continuation after getting a new iclog.
 		 */
-		spin_lock(&log->l_icloglock);
-		xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt);
-		*record_cnt = 0;
-		*data_cnt = 0;
-		goto release_iclog;
-	}
+		do {
+			/*
+			 * Ensure we include the continuation opheader in the
+			 * space we need in the new iclog by adding that size
+			 * to the length we require. This continuation opheader
+			 * needs to be accounted to the ticket as the space it
+			 * consumes hasn't been accounted to the lv we are
+			 * writing.
+			 */
+			error = xlog_write_get_more_iclog_space(ticket,
+					&iclog, log_offset,
+					*len + sizeof(struct xlog_op_header),
+					record_cnt, data_cnt, contwr);
+			if (error)
+				return error;
+
+			ophdr = iclog->ic_datap + *log_offset;
+			ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
+			ophdr->oh_clientid = XFS_TRANSACTION;
+			ophdr->oh_res2 = 0;
+			ophdr->oh_flags = XLOG_WAS_CONT_TRANS;
 
-	*partial_copy = 0;
-	*partial_copy_len = 0;
+			ticket->t_curr_res -= sizeof(struct xlog_op_header);
+			*log_offset += sizeof(struct xlog_op_header);
+			*data_cnt += sizeof(struct xlog_op_header);
 
-	if (iclog->ic_size - log_offset > sizeof(xlog_op_header_t))
-		return 0;
+			/*
+			 * If rlen fits in the iclog, then end the region
+			 * continuation. Otherwise we're going around again.
+			 */
+			reg_offset += rlen;
+			rlen = reg->i_len - reg_offset;
+			if (rlen <= iclog->ic_size - *log_offset)
+				ophdr->oh_flags |= XLOG_END_TRANS;
+			else
+				ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
 
-	/* no more space in this iclog - push it. */
-	spin_lock(&log->l_icloglock);
-	xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt);
-	*record_cnt = 0;
-	*data_cnt = 0;
+			rlen = min_t(uint32_t, rlen, iclog->ic_size - *log_offset);
+			ophdr->oh_len = cpu_to_be32(rlen);
 
-	if (iclog->ic_state == XLOG_STATE_ACTIVE)
-		xlog_state_switch_iclogs(log, iclog, 0);
-	else
-		ASSERT(iclog->ic_state == XLOG_STATE_WANT_SYNC ||
-			xlog_is_shutdown(log));
-release_iclog:
-	error = xlog_state_release_iclog(log, iclog, 0);
-	spin_unlock(&log->l_icloglock);
-	return error;
+			xlog_verify_dest_ptr(log, iclog->ic_datap + *log_offset);
+			xlog_write_iovec(iclog, log_offset,
+					reg->i_addr + reg_offset,
+					rlen, len, record_cnt, data_cnt);
+
+		} while (ophdr->oh_flags & XLOG_CONTINUE_TRANS);
+	}
+
+	/*
+	 * No more iovecs remain in this logvec so return the next log vec to
+	 * the caller so it can go back to fast path copying.
+	 */
+	*iclogp = iclog;
+	return 0;
 }
 
 /*
@@ -2437,14 +2504,11 @@ xlog_write(
 {
 	struct xlog_in_core	*iclog = NULL;
 	struct xfs_log_vec	*lv = log_vector;
-	struct xfs_log_iovec	*vecp = lv->lv_iovecp;
-	int			index = 0;
-	int			partial_copy = 0;
-	int			partial_copy_len = 0;
 	int			contwr = 0;
 	uint32_t		record_cnt = 0;
 	uint32_t		data_cnt = 0;
 	int			error = 0;
+	int			log_offset;
 
 	if (ticket->t_curr_res < 0) {
 		xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
@@ -2453,151 +2517,54 @@ xlog_write(
 		xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
 	}
 
-	while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
-		void		*ptr;
-		int		log_offset;
-
-		error = xlog_state_get_iclog_space(log, len, &iclog, ticket,
-						   &contwr, &log_offset);
-		if (error)
-			return error;
+	error = xlog_state_get_iclog_space(log, len, &iclog, ticket,
+					   &contwr, &log_offset);
+	if (error)
+		return error;
 
-		ASSERT(log_offset <= iclog->ic_size - 1);
+	ASSERT(log_offset <= iclog->ic_size - 1);
 
-		/*
-		 * If we have a context pointer, pass it the first iclog we are
-		 * writing to so it can record state needed for iclog write
-		 * ordering.
-		 */
-		if (ctx) {
-			xlog_cil_set_ctx_write_state(ctx, iclog);
-			ctx = NULL;
-		}
-
-		/* If this is a single iclog write, go fast... */
-		if (!contwr && lv == log_vector) {
-			while (lv) {
-				xlog_write_full(lv, ticket, iclog, &log_offset,
-						 &len, &record_cnt, &data_cnt);
-				lv = lv->lv_next;
-			}
-			data_cnt = 0;
-			break;
-		}
+	/*
+	 * If we have a context pointer, pass it the first iclog we are
+	 * writing to so it can record state needed for iclog write
+	 * ordering.
+	 */
+	if (ctx)
+		xlog_cil_set_ctx_write_state(ctx, iclog);
 
+	while (lv) {
 		/*
-		 * This loop writes out as many regions as can fit in the amount
-		 * of space which was allocated by xlog_state_get_iclog_space().
+		 * If the entire log vec does not fit in the iclog, punt it to
+		 * the partial copy loop which can handle this case.
 		 */
-		ptr = iclog->ic_datap + log_offset;
-		while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
-			struct xfs_log_iovec	*reg;
-			struct xlog_op_header	*ophdr;
-			int			copy_len;
-			int			copy_off;
-			bool			ordered = false;
-			bool			added_ophdr = false;
-
-			/* ordered log vectors have no regions to write */
-			if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED) {
-				ASSERT(lv->lv_niovecs == 0);
-				ordered = true;
-				goto next_lv;
-			}
-
-			reg = &vecp[index];
-			ASSERT(reg->i_len % sizeof(int32_t) == 0);
-			ASSERT((unsigned long)ptr % sizeof(int32_t) == 0);
-
-			/*
-			 * Regions always have their ophdr at the start of the
-			 * region, except for:
-			 * - a transaction start which has a start record ophdr
-			 *   before the first region ophdr; and
-			 * - the previous region didn't fully fit into an iclog
-			 *   so needs a continuation ophdr to prepend the region
-			 *   in this new iclog.
-			 */
-			ophdr = reg->i_addr;
-			if (optype && index) {
-				optype &= ~XLOG_START_TRANS;
-			} else if (partial_copy) {
-                                ophdr = xlog_write_setup_ophdr(ptr, ticket);
-				xlog_write_adv_cnt(&ptr, &len, &log_offset,
-					   sizeof(struct xlog_op_header));
-				added_ophdr = true;
-			}
-			ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
-
-			len += xlog_write_setup_copy(ticket, ophdr,
-						     iclog->ic_size-log_offset,
-						     reg->i_len,
-						     &copy_off, &copy_len,
-						     &partial_copy,
-						     &partial_copy_len);
-			xlog_verify_dest_ptr(log, ptr);
-
-
-			/*
-			 * Wart: need to update length in embedded ophdr not
-			 * to include it's own length.
-			 */
-			if (!added_ophdr) {
-				ophdr->oh_len = cpu_to_be32(copy_len -
-						sizeof(struct xlog_op_header));
-			}
-
-			ASSERT(copy_len > 0);
-			memcpy(ptr, reg->i_addr + copy_off, copy_len);
-			xlog_write_adv_cnt(&ptr, &len, &log_offset, copy_len);
-
-			if (added_ophdr)
-				copy_len += sizeof(struct xlog_op_header);
-			record_cnt++;
-			data_cnt += contwr ? copy_len : 0;
-
-			error = xlog_write_copy_finish(log, iclog, optype,
-						       &record_cnt, &data_cnt,
-						       &partial_copy,
-						       &partial_copy_len,
-						       log_offset);
-			if (error)
+		if (lv->lv_niovecs &&
+		    lv->lv_bytes > iclog->ic_size - log_offset) {
+			error = xlog_write_partial(lv, ticket, &iclog,
+					&log_offset, &len, &record_cnt,
+					&data_cnt, &contwr);
+			if (error) {
+				/*
+				 * We have no iclog to release, so just return
+				 * the error immediately.
+				 */
 				return error;
-
-			/*
-			 * if we had a partial copy, we need to get more iclog
-			 * space but we don't want to increment the region
-			 * index because there is still more is this region to
-			 * write.
-			 *
-			 * If we completed writing this region, and we flushed
-			 * the iclog (indicated by resetting of the record
-			 * count), then we also need to get more log space. If
-			 * this was the last record, though, we are done and
-			 * can just return.
-			 */
-			if (partial_copy)
-				break;
-
-			if (++index == lv->lv_niovecs) {
-next_lv:
-				lv = lv->lv_next;
-				index = 0;
-				if (lv)
-					vecp = lv->lv_iovecp;
-			}
-			if (record_cnt == 0 && !ordered) {
-				if (!lv)
-					return 0;
-				break;
 			}
+		} else {
+			xlog_write_full(lv, ticket, iclog, &log_offset,
+					 &len, &record_cnt, &data_cnt);
 		}
+		lv = lv->lv_next;
 	}
-
 	ASSERT(len == 0);
 
+	/*
+	 * We've already been guaranteed that the last writes will fit inside
+	 * the current iclog, and hence it will already have the space used by
+	 * those writes accounted to it. Hence we do not need to update the
+	 * iclog with the number of bytes written here.
+	 */
 	spin_lock(&log->l_icloglock);
-	xlog_state_finish_copy(log, iclog, record_cnt, data_cnt);
+	xlog_state_finish_copy(log, iclog, record_cnt, 0);
 	error = xlog_state_release_iclog(log, iclog, 0);
 	spin_unlock(&log->l_icloglock);
 
@@ -3754,11 +3721,12 @@ xlog_verify_iclog(
 					iclog->ic_header.h_cycle_data[idx]);
 			}
 		}
-		if (clientid != XFS_TRANSACTION && clientid != XFS_LOG)
+		if (clientid != XFS_TRANSACTION && clientid != XFS_LOG) {
 			xfs_warn(log->l_mp,
-				"%s: invalid clientid %d op "PTR_FMT" offset 0x%lx",
-				__func__, clientid, ophead,
+				"%s: op %d invalid clientid %d op "PTR_FMT" offset 0x%lx",
+				__func__, i, clientid, ophead,
 				(unsigned long)field_offset);
+		}
 
 		/* check length */
 		p = &ophead->oh_len;
fs/xfs/xfs_log_priv.h +0 -8
index 51254d7f38d6..6e9c7d924363 100644
@@ -480,14 +480,6 @@ extern struct kmem_cache *xfs_log_ticket_cache;
 struct xlog_ticket *xlog_ticket_alloc(struct xlog *log, int unit_bytes,
 		int count, bool permanent);
 
-static inline void
-xlog_write_adv_cnt(void **ptr, int *len, int *off, size_t bytes)
-{
-	*ptr += bytes;
-	*len -= bytes;
-	*off += bytes;
-}
-
 void	xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
 void	xlog_print_trans(struct xfs_trans *);
 int	xlog_write(struct xlog *log, struct xfs_cil_ctx *ctx,
Signature · 1 line
2.33.0
#23 lore raw

Re: [PATCH 12/16] xfs:_introduce xlog_write_partial()

In reply to Dave Chinner
Quoted 1 line

Subject: [PATCH 12/16] xfs:_introduce xlog_write_partial()

Nit: There's still an ^ underscore in the subject.

Quoted 230 lines · Dave Chinner

From: Dave Chinner <[email protected]>

Re-implement writing of a log vector that does not fit into the current iclog. The iclog will already be in XLOG_STATE_WANT_SYNC because xlog_get_iclog_space() will have reserved all the remaining iclog space for us, hence we can simply iterate over the iovecs in the log vector getting more iclog space until the entire log vector is written.

handling this partial write case separately means we do need to pass unnecessary state around for the common, fast path case when the log vector fits entirely within the current iclog. It isolates the complexity and allows us to modify and improve the partial write case without impacting the simple fast path.

This change includes several improvements incorporated from patches written by Christoph Hellwig.

---
 fs/xfs/xfs_log.c      | 424 +++++++++++++++++++-----------------------
 fs/xfs/xfs_log_priv.h |   8 -
 2 files changed, 196 insertions(+), 236 deletions(-)
fs/xfs/xfs_log.c +107 -70
index 44134f8e699c..02db5a712e76 100644
@@ -2260,7 +2260,8 @@ xlog_write_full(
 {
 	int			index;
 
-	ASSERT(*log_offset + *len <= iclog->ic_size);
+	ASSERT(*log_offset + *len <= iclog->ic_size ||
+		iclog->ic_state == XLOG_STATE_WANT_SYNC);
 
 	/*
 	 * Ordered log vectors have no regions to write so this
@@ -2278,111 +2279,177 @@ xlog_write_full(
 	}
 }
 
-static xlog_op_header_t *
-xlog_write_setup_ophdr(
-	struct xlog_op_header	*ophdr,
-	struct xlog_ticket	*ticket)
+static int
+xlog_write_get_more_iclog_space(
+	struct xlog_ticket	*ticket,
+	struct xlog_in_core	**iclogp,
+	uint32_t		*log_offset,
+	uint32_t		len,
+	uint32_t		*record_cnt,
+	uint32_t		*data_cnt,
+	int			*contwr)
 {
-	ophdr->oh_clientid = XFS_TRANSACTION;
-	ophdr->oh_res2 = 0;
-	ophdr->oh_flags = 0;
-	return ophdr;
+	struct xlog_in_core	*iclog = *iclogp;
+	struct xlog		*log = iclog->ic_log;
+	int			error;
+
+	spin_lock(&log->l_icloglock);
+	ASSERT(iclog->ic_state == XLOG_STATE_WANT_SYNC);
+	xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt);
+	error = xlog_state_release_iclog(log, iclog, 0);
+	spin_unlock(&log->l_icloglock);
+	if (error)
+		return error;
+
+	error = xlog_state_get_iclog_space(log, len, &iclog,
+				ticket, contwr, log_offset);
+	if (error)
+		return error;
+	*record_cnt = 0;
+	*data_cnt = 0;
+	*iclogp = iclog;
+	return 0;
 }
 
 /*
- * Set up the parameters of the region copy into the log. This has
- * to handle region write split across multiple log buffers - this
- * state is kept external to this function so that this code can
- * be written in an obvious, self documenting manner.
+ * Write log vectors into a single iclog which is smaller than the current chain
+ * length. We write until we cannot fit a full record into the remaining space
+ * and then stop. We return the log vector that is to be written that cannot
+ * wholly fit in the iclog.
  */
 static int
-xlog_write_setup_copy(
+xlog_write_partial(
+	struct xfs_log_vec	*lv,
 	struct xlog_ticket	*ticket,
-	struct xlog_op_header	*ophdr,
-	int			space_available,
-	int			space_required,
-	int			*copy_off,
-	int			*copy_len,
-	int			*last_was_partial_copy,
-	int			*bytes_consumed)
-{
-	int			still_to_copy;
-
-	still_to_copy = space_required - *bytes_consumed;
-	*copy_off = *bytes_consumed;
-
-	if (still_to_copy <= space_available) {
-		/* write of region completes here */
-		*copy_len = still_to_copy;
-		ophdr->oh_len = cpu_to_be32(*copy_len);
-		if (*last_was_partial_copy)
-			ophdr->oh_flags |= (XLOG_END_TRANS|XLOG_WAS_CONT_TRANS);
-		*last_was_partial_copy = 0;
-		*bytes_consumed = 0;
-		return 0;
-	}
+	struct xlog_in_core	**iclogp,
+	uint32_t		*log_offset,
+	uint32_t		*len,
+	uint32_t		*record_cnt,
+	uint32_t		*data_cnt,
+	int			*contwr)
+{
+	struct xlog_in_core	*iclog = *iclogp;
+	struct xlog		*log = iclog->ic_log;
+	struct xlog_op_header	*ophdr;
+	int			index = 0;
+	uint32_t		rlen;
+	int			error;
 
-	/* partial write of region, needs extra log op header reservation */
-	*copy_len = space_available;
-	ophdr->oh_len = cpu_to_be32(*copy_len);
-	ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
-	if (*last_was_partial_copy)
-		ophdr->oh_flags |= XLOG_WAS_CONT_TRANS;
-	*bytes_consumed += *copy_len;
-	(*last_was_partial_copy)++;
+	/* walk the logvec, copying until we run out of space in the iclog */
+	for (index = 0; index < lv->lv_niovecs; index++) {
+		struct xfs_log_iovec	*reg = &lv->lv_iovecp[index];
+		uint32_t		reg_offset = 0;
 
-	/* account for new log op header */
-	ticket->t_curr_res -= sizeof(struct xlog_op_header);
+		/*
+		 * The first region of a continuation must have a non-zero
+		 * length otherwise log recovery will just skip over it and
+		 * start recovering from the next opheader it finds. Because we
+		 * mark the next opheader as a continuation, recovery will then
+		 * incorrectly add the continuation to the previous region and
+		 * that breaks stuff.
+		 *
+		 * Hence if there isn't space for region data after the
+		 * opheader, then we need to start afresh with a new iclog.
+		 */
+		if (iclog->ic_size - *log_offset <=
+					sizeof(struct xlog_op_header)) {
+			error = xlog_write_get_more_iclog_space(ticket,
+					&iclog, log_offset, *len, record_cnt,
+					data_cnt, contwr);
+			if (error)
+				return error;
+		}
 
-	return sizeof(struct xlog_op_header);
-}
+		ophdr = reg->i_addr;
+		rlen = min_t(uint32_t, reg->i_len, iclog->ic_size - *log_offset);
 
-static int
-xlog_write_copy_finish(
-	struct xlog		*log,
-	struct xlog_in_core	*iclog,
-	uint			flags,
-	int			*record_cnt,
-	int			*data_cnt,
-	int			*partial_copy,
-	int			*partial_copy_len,
-	int			log_offset)
-{
-	int			error;
+		ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
+		ophdr->oh_len = cpu_to_be32(rlen - sizeof(struct xlog_op_header));
+		if (rlen != reg->i_len)
+			ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
+
+		xlog_verify_dest_ptr(log, iclog->ic_datap + *log_offset);
+		xlog_write_iovec(iclog, log_offset, reg->i_addr,
+				rlen, len, record_cnt, data_cnt);
+
+		/* If we wrote the whole region, move to the next. */
+		if (rlen == reg->i_len)
+			continue;
 
-	if (*partial_copy) {
 		/*
-		 * This iclog has already been marked WANT_SYNC by
-		 * xlog_state_get_iclog_space.
+		 * We now have a partially written iovec, but it can span
+		 * multiple iclogs so we loop here. First we release the iclog
+		 * we currently have, then we get a new iclog and add a new
+		 * opheader. Then we continue copying from where we were until
+		 * we either complete the iovec or fill the iclog. If we
+		 * complete the iovec, then we increment the index and go right
+		 * back to the top of the outer loop. if we fill the iclog, we
+		 * run the inner loop again.
+		 *
+		 * This is complicated by the tail of a region using all the
+		 * space in an iclog and hence requiring us to release the iclog
+		 * and get a new one before returning to the outer loop. We must
+		 * always guarantee that we exit this inner loop with at least
+		 * space for log transaction opheaders left in the current
+		 * iclog, hence we cannot just terminate the loop at the end
+		 * of the of the continuation. So we loop while there is no
+		 * space left in the current iclog, and check for the end of the
+		 * continuation after getting a new iclog.
 		 */
-		spin_lock(&log->l_icloglock);
-		xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt);
-		*record_cnt = 0;
-		*data_cnt = 0;
-		goto release_iclog;
-	}
+		do {
+			/*

fs/xfs/xfs_log.c xlog_write_full( · line 2410

Quoted 10 lines
fs/xfs/xfs_log.c +10 -0
+			 * Ensure we include the continuation opheader in the
+			 * space we need in the new iclog by adding that size
+			 * to the length we require. This continuation opheader
+			 * needs to be accounted to the ticket as the space it
+			 * consumes hasn't been accounted to the lv we are
+			 * writing.
+			 */
+			error = xlog_write_get_more_iclog_space(ticket,
+					&iclog, log_offset,
+					*len + sizeof(struct xlog_op_header),

Hm. The last time I saw this patch, it incremented *len by the sizeof expression, but now we merely pass (*len + sizeof(...)) into xlog_write_get_more_iclog_space. Why is that?

The rest of this looks more or less like a slightly reorganized version that I looked at the from June, so that was the only question I had.

--D

Quoted 305 lines
fs/xfs/xfs_log.c +79 -158
+					record_cnt, data_cnt, contwr);
+			if (error)
+				return error;
+
+			ophdr = iclog->ic_datap + *log_offset;
+			ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
+			ophdr->oh_clientid = XFS_TRANSACTION;
+			ophdr->oh_res2 = 0;
+			ophdr->oh_flags = XLOG_WAS_CONT_TRANS;
 
-	*partial_copy = 0;
-	*partial_copy_len = 0;
+			ticket->t_curr_res -= sizeof(struct xlog_op_header);
+			*log_offset += sizeof(struct xlog_op_header);
+			*data_cnt += sizeof(struct xlog_op_header);
 
-	if (iclog->ic_size - log_offset > sizeof(xlog_op_header_t))
-		return 0;
+			/*
+			 * If rlen fits in the iclog, then end the region
+			 * continuation. Otherwise we're going around again.
+			 */
+			reg_offset += rlen;
+			rlen = reg->i_len - reg_offset;
+			if (rlen <= iclog->ic_size - *log_offset)
+				ophdr->oh_flags |= XLOG_END_TRANS;
+			else
+				ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
 
-	/* no more space in this iclog - push it. */
-	spin_lock(&log->l_icloglock);
-	xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt);
-	*record_cnt = 0;
-	*data_cnt = 0;
+			rlen = min_t(uint32_t, rlen, iclog->ic_size - *log_offset);
+			ophdr->oh_len = cpu_to_be32(rlen);
 
-	if (iclog->ic_state == XLOG_STATE_ACTIVE)
-		xlog_state_switch_iclogs(log, iclog, 0);
-	else
-		ASSERT(iclog->ic_state == XLOG_STATE_WANT_SYNC ||
-			xlog_is_shutdown(log));
-release_iclog:
-	error = xlog_state_release_iclog(log, iclog, 0);
-	spin_unlock(&log->l_icloglock);
-	return error;
+			xlog_verify_dest_ptr(log, iclog->ic_datap + *log_offset);
+			xlog_write_iovec(iclog, log_offset,
+					reg->i_addr + reg_offset,
+					rlen, len, record_cnt, data_cnt);
+
+		} while (ophdr->oh_flags & XLOG_CONTINUE_TRANS);
+	}
+
+	/*
+	 * No more iovecs remain in this logvec so return the next log vec to
+	 * the caller so it can go back to fast path copying.
+	 */
+	*iclogp = iclog;
+	return 0;
 }
 
 /*
@@ -2437,14 +2504,11 @@ xlog_write(
 {
 	struct xlog_in_core	*iclog = NULL;
 	struct xfs_log_vec	*lv = log_vector;
-	struct xfs_log_iovec	*vecp = lv->lv_iovecp;
-	int			index = 0;
-	int			partial_copy = 0;
-	int			partial_copy_len = 0;
 	int			contwr = 0;
 	uint32_t		record_cnt = 0;
 	uint32_t		data_cnt = 0;
 	int			error = 0;
+	int			log_offset;
 
 	if (ticket->t_curr_res < 0) {
 		xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
@@ -2453,151 +2517,54 @@ xlog_write(
 		xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
 	}
 
-	while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
-		void		*ptr;
-		int		log_offset;
-
-		error = xlog_state_get_iclog_space(log, len, &iclog, ticket,
-						   &contwr, &log_offset);
-		if (error)
-			return error;
+	error = xlog_state_get_iclog_space(log, len, &iclog, ticket,
+					   &contwr, &log_offset);
+	if (error)
+		return error;
 
-		ASSERT(log_offset <= iclog->ic_size - 1);
+	ASSERT(log_offset <= iclog->ic_size - 1);
 
-		/*
-		 * If we have a context pointer, pass it the first iclog we are
-		 * writing to so it can record state needed for iclog write
-		 * ordering.
-		 */
-		if (ctx) {
-			xlog_cil_set_ctx_write_state(ctx, iclog);
-			ctx = NULL;
-		}
-
-		/* If this is a single iclog write, go fast... */
-		if (!contwr && lv == log_vector) {
-			while (lv) {
-				xlog_write_full(lv, ticket, iclog, &log_offset,
-						 &len, &record_cnt, &data_cnt);
-				lv = lv->lv_next;
-			}
-			data_cnt = 0;
-			break;
-		}
+	/*
+	 * If we have a context pointer, pass it the first iclog we are
+	 * writing to so it can record state needed for iclog write
+	 * ordering.
+	 */
+	if (ctx)
+		xlog_cil_set_ctx_write_state(ctx, iclog);
 
+	while (lv) {
 		/*
-		 * This loop writes out as many regions as can fit in the amount
-		 * of space which was allocated by xlog_state_get_iclog_space().
+		 * If the entire log vec does not fit in the iclog, punt it to
+		 * the partial copy loop which can handle this case.
 		 */
-		ptr = iclog->ic_datap + log_offset;
-		while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
-			struct xfs_log_iovec	*reg;
-			struct xlog_op_header	*ophdr;
-			int			copy_len;
-			int			copy_off;
-			bool			ordered = false;
-			bool			added_ophdr = false;
-
-			/* ordered log vectors have no regions to write */
-			if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED) {
-				ASSERT(lv->lv_niovecs == 0);
-				ordered = true;
-				goto next_lv;
-			}
-
-			reg = &vecp[index];
-			ASSERT(reg->i_len % sizeof(int32_t) == 0);
-			ASSERT((unsigned long)ptr % sizeof(int32_t) == 0);
-
-			/*
-			 * Regions always have their ophdr at the start of the
-			 * region, except for:
-			 * - a transaction start which has a start record ophdr
-			 *   before the first region ophdr; and
-			 * - the previous region didn't fully fit into an iclog
-			 *   so needs a continuation ophdr to prepend the region
-			 *   in this new iclog.
-			 */
-			ophdr = reg->i_addr;
-			if (optype && index) {
-				optype &= ~XLOG_START_TRANS;
-			} else if (partial_copy) {
-                                ophdr = xlog_write_setup_ophdr(ptr, ticket);
-				xlog_write_adv_cnt(&ptr, &len, &log_offset,
-					   sizeof(struct xlog_op_header));
-				added_ophdr = true;
-			}
-			ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
-
-			len += xlog_write_setup_copy(ticket, ophdr,
-						     iclog->ic_size-log_offset,
-						     reg->i_len,
-						     &copy_off, &copy_len,
-						     &partial_copy,
-						     &partial_copy_len);
-			xlog_verify_dest_ptr(log, ptr);
-
-
-			/*
-			 * Wart: need to update length in embedded ophdr not
-			 * to include it's own length.
-			 */
-			if (!added_ophdr) {
-				ophdr->oh_len = cpu_to_be32(copy_len -
-						sizeof(struct xlog_op_header));
-			}
-
-			ASSERT(copy_len > 0);
-			memcpy(ptr, reg->i_addr + copy_off, copy_len);
-			xlog_write_adv_cnt(&ptr, &len, &log_offset, copy_len);
-
-			if (added_ophdr)
-				copy_len += sizeof(struct xlog_op_header);
-			record_cnt++;
-			data_cnt += contwr ? copy_len : 0;
-
-			error = xlog_write_copy_finish(log, iclog, optype,
-						       &record_cnt, &data_cnt,
-						       &partial_copy,
-						       &partial_copy_len,
-						       log_offset);
-			if (error)
+		if (lv->lv_niovecs &&
+		    lv->lv_bytes > iclog->ic_size - log_offset) {
+			error = xlog_write_partial(lv, ticket, &iclog,
+					&log_offset, &len, &record_cnt,
+					&data_cnt, &contwr);
+			if (error) {
+				/*
+				 * We have no iclog to release, so just return
+				 * the error immediately.
+				 */
 				return error;
-
-			/*
-			 * if we had a partial copy, we need to get more iclog
-			 * space but we don't want to increment the region
-			 * index because there is still more is this region to
-			 * write.
-			 *
-			 * If we completed writing this region, and we flushed
-			 * the iclog (indicated by resetting of the record
-			 * count), then we also need to get more log space. If
-			 * this was the last record, though, we are done and
-			 * can just return.
-			 */
-			if (partial_copy)
-				break;
-
-			if (++index == lv->lv_niovecs) {
-next_lv:
-				lv = lv->lv_next;
-				index = 0;
-				if (lv)
-					vecp = lv->lv_iovecp;
-			}
-			if (record_cnt == 0 && !ordered) {
-				if (!lv)
-					return 0;
-				break;
 			}
+		} else {
+			xlog_write_full(lv, ticket, iclog, &log_offset,
+					 &len, &record_cnt, &data_cnt);
 		}
+		lv = lv->lv_next;
 	}
-
 	ASSERT(len == 0);
 
+	/*
+	 * We've already been guaranteed that the last writes will fit inside
+	 * the current iclog, and hence it will already have the space used by
+	 * those writes accounted to it. Hence we do not need to update the
+	 * iclog with the number of bytes written here.
+	 */
 	spin_lock(&log->l_icloglock);
-	xlog_state_finish_copy(log, iclog, record_cnt, data_cnt);
+	xlog_state_finish_copy(log, iclog, record_cnt, 0);
 	error = xlog_state_release_iclog(log, iclog, 0);
 	spin_unlock(&log->l_icloglock);
 
@@ -3754,11 +3721,12 @@ xlog_verify_iclog(
 					iclog->ic_header.h_cycle_data[idx]);
 			}
 		}
-		if (clientid != XFS_TRANSACTION && clientid != XFS_LOG)
+		if (clientid != XFS_TRANSACTION && clientid != XFS_LOG) {
 			xfs_warn(log->l_mp,
-				"%s: invalid clientid %d op "PTR_FMT" offset 0x%lx",
-				__func__, clientid, ophead,
+				"%s: op %d invalid clientid %d op "PTR_FMT" offset 0x%lx",
+				__func__, i, clientid, ophead,
 				(unsigned long)field_offset);
+		}
 
 		/* check length */
 		p = &ophead->oh_len;
fs/xfs/xfs_log_priv.h +0 -8
index 51254d7f38d6..6e9c7d924363 100644
@@ -480,14 +480,6 @@ extern struct kmem_cache *xfs_log_ticket_cache;
 struct xlog_ticket *xlog_ticket_alloc(struct xlog *log, int unit_bytes,
 		int count, bool permanent);
 
-static inline void
-xlog_write_adv_cnt(void **ptr, int *len, int *off, size_t bytes)
-{
-	*ptr += bytes;
-	*len -= bytes;
-	*off += bytes;
-}
-
 void	xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
 void	xlog_print_trans(struct xfs_trans *);
 int	xlog_write(struct xlog *log, struct xfs_cil_ctx *ctx,
Signature · 1 line
2.33.0
#24 lore raw

Re: [PATCH 12/16] xfs:_introduce xlog_write_partial()

Quoted 3 lines · Darrick J. Wong
Quoted 1 line

Subject: [PATCH 12/16] xfs:_introduce xlog_write_partial()

Nit: There's still an ^ underscore in the subject.

fixed.

Quoted 50 lines
Quoted 50 lines
fs/xfs/xfs_log.c +38 -9
+		ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
+		ophdr->oh_len = cpu_to_be32(rlen - sizeof(struct xlog_op_header));
+		if (rlen != reg->i_len)
+			ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
+
+		xlog_verify_dest_ptr(log, iclog->ic_datap + *log_offset);
+		xlog_write_iovec(iclog, log_offset, reg->i_addr,
+				rlen, len, record_cnt, data_cnt);
+
+		/* If we wrote the whole region, move to the next. */
+		if (rlen == reg->i_len)
+			continue;
 
-	if (*partial_copy) {
 		/*
-		 * This iclog has already been marked WANT_SYNC by
-		 * xlog_state_get_iclog_space.
+		 * We now have a partially written iovec, but it can span
+		 * multiple iclogs so we loop here. First we release the iclog
+		 * we currently have, then we get a new iclog and add a new
+		 * opheader. Then we continue copying from where we were until
+		 * we either complete the iovec or fill the iclog. If we
+		 * complete the iovec, then we increment the index and go right
+		 * back to the top of the outer loop. if we fill the iclog, we
+		 * run the inner loop again.
+		 *
+		 * This is complicated by the tail of a region using all the
+		 * space in an iclog and hence requiring us to release the iclog
+		 * and get a new one before returning to the outer loop. We must
+		 * always guarantee that we exit this inner loop with at least
+		 * space for log transaction opheaders left in the current
+		 * iclog, hence we cannot just terminate the loop at the end
+		 * of the of the continuation. So we loop while there is no
+		 * space left in the current iclog, and check for the end of the
+		 * continuation after getting a new iclog.
 		 */
-		spin_lock(&log->l_icloglock);
-		xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt);
-		*record_cnt = 0;
-		*data_cnt = 0;
-		goto release_iclog;
-	}
+		do {
+			/*
+			 * Ensure we include the continuation opheader in the
+			 * space we need in the new iclog by adding that size
+			 * to the length we require. This continuation opheader
+			 * needs to be accounted to the ticket as the space it
+			 * consumes hasn't been accounted to the lv we are
+			 * writing.
Quoted 8 lines

fs/xfs/xfs_log.c xlog_write_full( · line 2410

Quoted 4 lines
fs/xfs/xfs_log.c +4 -0
+			 */
+			error = xlog_write_get_more_iclog_space(ticket,
+					&iclog, log_offset,
+					*len + sizeof(struct xlog_op_header),

Hm. The last time I saw this patch, it incremented *len by the sizeof expression, but now we merely pass (*len + sizeof(...)) into xlog_write_get_more_iclog_space. Why is that?

The space required in the iclog includes an extra ophdr, but *len tracks the amount of region data we've copied. The continuation ophdr space is not included in the region data, so that space does not affect how we account for copied data.

However, we do need account for the space used by the continuation ophdr in the space we use - reservation space, *log_offset and *data_cnt - because those are used to track offset into the iclog, data space used in the iclog and transaction reservation consumed. The continuation header accounting is done separately ....

Quoted 16 lines

The rest of this looks more or less like a slightly reorganized version that I looked at the from June, so that was the only question I had.

--D

Quoted 10 lines
fs/xfs/xfs_log.c +9 -0
+					record_cnt, data_cnt, contwr);
+			if (error)
+				return error;
+
+			ophdr = iclog->ic_datap + *log_offset;
+			ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
+			ophdr->oh_clientid = XFS_TRANSACTION;
+			ophdr->oh_res2 = 0;
+			ophdr->oh_flags = XLOG_WAS_CONT_TRANS;
Quoted 5 lines

fs/xfs/xfs_log.c xlog_write_full( · line 2423

Quoted 5 lines
fs/xfs/xfs_log.c +3 -2
-	*partial_copy = 0;
-	*partial_copy_len = 0;
+			ticket->t_curr_res -= sizeof(struct xlog_op_header);
+			*log_offset += sizeof(struct xlog_op_header);
+			*data_cnt += sizeof(struct xlog_op_header);

.... right here, immediately after we write it into the iclog data buffer.

Cheers,

Dave.

Signature · 2 lines
Dave Chinner
[email protected]
#25 lore raw

PATCH v6 13/16 xfs: remove xlog_verify_dest_ptr

In reply to Dave Chinner

From: Christoph Hellwig <[email protected]>

Just check that the offset in xlog_write_vec is smaller than the iclog size and remove the expensive cycling through all iclogs.

---
 fs/xfs/xfs_log.c      | 35 +----------------------------------
 fs/xfs/xfs_log_priv.h |  4 ----
 2 files changed, 1 insertion(+), 38 deletions(-)
fs/xfs/xfs_log.c +1 -34
index 02db5a712e76..d6ef555b1310 100644
@@ -61,10 +61,6 @@ xlog_sync(
 	struct xlog_in_core	*iclog);
 #if defined(DEBUG)
 STATIC void
-xlog_verify_dest_ptr(
-	struct xlog		*log,
-	void			*ptr);
-STATIC void
 xlog_verify_grant_tail(
 	struct xlog *log);
 STATIC void
@@ -77,7 +73,6 @@ xlog_verify_tail_lsn(
 	struct xlog		*log,
 	struct xlog_in_core	*iclog);
 #else
-#define xlog_verify_dest_ptr(a,b)
 #define xlog_verify_grant_tail(a)
 #define xlog_verify_iclog(a,b,c)
 #define xlog_verify_tail_lsn(a,b)
@@ -1640,9 +1635,6 @@ xlog_alloc_log(
 				GFP_KERNEL | __GFP_RETRY_MAYFAIL);
 		if (!iclog->ic_data)
 			goto out_free_iclog;
-#ifdef DEBUG
-		log->l_iclog_bak[i] = &iclog->ic_header;
-#endif
 		head = &iclog->ic_header;
 		memset(head, 0, sizeof(xlog_rec_header_t));
 		head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
@@ -2234,6 +2226,7 @@ xlog_write_iovec(
 	uint32_t		*record_cnt,
 	uint32_t		*data_cnt)
 {
+	ASSERT(*log_offset < iclog->ic_log->l_iclog_size);
 	ASSERT(*log_offset % sizeof(int32_t) == 0);
 	ASSERT(write_len % sizeof(int32_t) == 0);
 
@@ -2329,7 +2322,6 @@ xlog_write_partial(
 	int			*contwr)
 {
 	struct xlog_in_core	*iclog = *iclogp;
-	struct xlog		*log = iclog->ic_log;
 	struct xlog_op_header	*ophdr;
 	int			index = 0;
 	uint32_t		rlen;
@@ -2368,7 +2360,6 @@ xlog_write_partial(
 		if (rlen != reg->i_len)
 			ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
 
-		xlog_verify_dest_ptr(log, iclog->ic_datap + *log_offset);
 		xlog_write_iovec(iclog, log_offset, reg->i_addr,
 				rlen, len, record_cnt, data_cnt);
 
@@ -2436,7 +2427,6 @@ xlog_write_partial(
 			rlen = min_t(uint32_t, rlen, iclog->ic_size - *log_offset);
 			ophdr->oh_len = cpu_to_be32(rlen);
 
-			xlog_verify_dest_ptr(log, iclog->ic_datap + *log_offset);
 			xlog_write_iovec(iclog, log_offset,
 					reg->i_addr + reg_offset,
 					rlen, len, record_cnt, data_cnt);
@@ -3560,29 +3550,6 @@ xlog_ticket_alloc(
 }
 
 #if defined(DEBUG)
-/*
- * Make sure that the destination ptr is within the valid data region of
- * one of the iclogs.  This uses backup pointers stored in a different
- * part of the log in case we trash the log structure.
- */
-STATIC void
-xlog_verify_dest_ptr(
-	struct xlog	*log,
-	void		*ptr)
-{
-	int i;
-	int good_ptr = 0;
-
-	for (i = 0; i < log->l_iclog_bufs; i++) {
-		if (ptr >= log->l_iclog_bak[i] &&
-		    ptr <= log->l_iclog_bak[i] + log->l_iclog_size)
-			good_ptr++;
-	}
-
-	if (!good_ptr)
-		xfs_emerg(log->l_mp, "%s: invalid ptr", __func__);
-}
-
 /*
  * Check to make sure the grant write head didn't just over lap the tail.  If
  * the cycles are the same, we can't be overlapping.  Otherwise, make sure that
fs/xfs/xfs_log_priv.h +0 -4
index 6e9c7d924363..8c98b57e2a63 100644
@@ -420,10 +420,6 @@ struct xlog {
 
 	struct xfs_kobj		l_kobj;
 
-	/* The following field are used for debugging; need to hold icloglock */
-#ifdef DEBUG
-	void			*l_iclog_bak[XLOG_MAX_ICLOGS];
-#endif
 	/* log recovery lsn tracking (for buffer submission */
 	xfs_lsn_t		l_recovery_lsn;
 
Signature · 1 line
2.33.0
Reviewed-by on v6 13/16
#26 lore raw

Re: [PATCH 13/16] xfs: remove xlog_verify_dest_ptr

Quoted 9 lines · Dave Chinner

From: Christoph Hellwig <[email protected]>

Just check that the offset in xlog_write_vec is smaller than the iclog size and remove the expensive cycling through all iclogs.

Took a while to wrap my head around, but I got there.

--D

Quoted 118 lines
---
 fs/xfs/xfs_log.c      | 35 +----------------------------------
 fs/xfs/xfs_log_priv.h |  4 ----
 2 files changed, 1 insertion(+), 38 deletions(-)
fs/xfs/xfs_log.c +1 -34
index 02db5a712e76..d6ef555b1310 100644
@@ -61,10 +61,6 @@ xlog_sync(
 	struct xlog_in_core	*iclog);
 #if defined(DEBUG)
 STATIC void
-xlog_verify_dest_ptr(
-	struct xlog		*log,
-	void			*ptr);
-STATIC void
 xlog_verify_grant_tail(
 	struct xlog *log);
 STATIC void
@@ -77,7 +73,6 @@ xlog_verify_tail_lsn(
 	struct xlog		*log,
 	struct xlog_in_core	*iclog);
 #else
-#define xlog_verify_dest_ptr(a,b)
 #define xlog_verify_grant_tail(a)
 #define xlog_verify_iclog(a,b,c)
 #define xlog_verify_tail_lsn(a,b)
@@ -1640,9 +1635,6 @@ xlog_alloc_log(
 				GFP_KERNEL | __GFP_RETRY_MAYFAIL);
 		if (!iclog->ic_data)
 			goto out_free_iclog;
-#ifdef DEBUG
-		log->l_iclog_bak[i] = &iclog->ic_header;
-#endif
 		head = &iclog->ic_header;
 		memset(head, 0, sizeof(xlog_rec_header_t));
 		head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
@@ -2234,6 +2226,7 @@ xlog_write_iovec(
 	uint32_t		*record_cnt,
 	uint32_t		*data_cnt)
 {
+	ASSERT(*log_offset < iclog->ic_log->l_iclog_size);
 	ASSERT(*log_offset % sizeof(int32_t) == 0);
 	ASSERT(write_len % sizeof(int32_t) == 0);
 
@@ -2329,7 +2322,6 @@ xlog_write_partial(
 	int			*contwr)
 {
 	struct xlog_in_core	*iclog = *iclogp;
-	struct xlog		*log = iclog->ic_log;
 	struct xlog_op_header	*ophdr;
 	int			index = 0;
 	uint32_t		rlen;
@@ -2368,7 +2360,6 @@ xlog_write_partial(
 		if (rlen != reg->i_len)
 			ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
 
-		xlog_verify_dest_ptr(log, iclog->ic_datap + *log_offset);
 		xlog_write_iovec(iclog, log_offset, reg->i_addr,
 				rlen, len, record_cnt, data_cnt);
 
@@ -2436,7 +2427,6 @@ xlog_write_partial(
 			rlen = min_t(uint32_t, rlen, iclog->ic_size - *log_offset);
 			ophdr->oh_len = cpu_to_be32(rlen);
 
-			xlog_verify_dest_ptr(log, iclog->ic_datap + *log_offset);
 			xlog_write_iovec(iclog, log_offset,
 					reg->i_addr + reg_offset,
 					rlen, len, record_cnt, data_cnt);
@@ -3560,29 +3550,6 @@ xlog_ticket_alloc(
 }
 
 #if defined(DEBUG)
-/*
- * Make sure that the destination ptr is within the valid data region of
- * one of the iclogs.  This uses backup pointers stored in a different
- * part of the log in case we trash the log structure.
- */
-STATIC void
-xlog_verify_dest_ptr(
-	struct xlog	*log,
-	void		*ptr)
-{
-	int i;
-	int good_ptr = 0;
-
-	for (i = 0; i < log->l_iclog_bufs; i++) {
-		if (ptr >= log->l_iclog_bak[i] &&
-		    ptr <= log->l_iclog_bak[i] + log->l_iclog_size)
-			good_ptr++;
-	}
-
-	if (!good_ptr)
-		xfs_emerg(log->l_mp, "%s: invalid ptr", __func__);
-}
-
 /*
  * Check to make sure the grant write head didn't just over lap the tail.  If
  * the cycles are the same, we can't be overlapping.  Otherwise, make sure that
fs/xfs/xfs_log_priv.h +0 -4
index 6e9c7d924363..8c98b57e2a63 100644
@@ -420,10 +420,6 @@ struct xlog {
 
 	struct xfs_kobj		l_kobj;
 
-	/* The following field are used for debugging; need to hold icloglock */
-#ifdef DEBUG
-	void			*l_iclog_bak[XLOG_MAX_ICLOGS];
-#endif
 	/* log recovery lsn tracking (for buffer submission */
 	xfs_lsn_t		l_recovery_lsn;
 
Signature · 1 line
2.33.0
#27 lore raw

PATCH v6 14/16 xfs: xlog_write() no longer needs contwr state

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

The rework of xlog_write() no longer requires xlog_get_iclog_state() to tell it about internal iclog space reservation state to direct it on what to do. Remove this parameter.

$ size fs/xfs/xfs_log.o.*
   text	   data	    bss	    dec	    hex	filename
  26520	    560	      8	  27088	   69d0	fs/xfs/xfs_log.o.orig
  26384	    560	      8	  26952	   6948	fs/xfs/xfs_log.o.patched
---
 fs/xfs/xfs_log.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)
fs/xfs/xfs_log.c +10 -18
index d6ef555b1310..406c14dbe926 100644
@@ -49,7 +49,6 @@ xlog_state_get_iclog_space(
 	int			len,
 	struct xlog_in_core	**iclog,
 	struct xlog_ticket	*ticket,
-	int			*continued_write,
 	int			*logoffsetp);
 STATIC void
 xlog_grant_push_ail(
@@ -2279,8 +2278,7 @@ xlog_write_get_more_iclog_space(
 	uint32_t		*log_offset,
 	uint32_t		len,
 	uint32_t		*record_cnt,
-	uint32_t		*data_cnt,
-	int			*contwr)
+	uint32_t		*data_cnt)
 {
 	struct xlog_in_core	*iclog = *iclogp;
 	struct xlog		*log = iclog->ic_log;
@@ -2294,8 +2292,8 @@ xlog_write_get_more_iclog_space(
 	if (error)
 		return error;
 
-	error = xlog_state_get_iclog_space(log, len, &iclog,
-				ticket, contwr, log_offset);
+	error = xlog_state_get_iclog_space(log, len, &iclog, ticket,
+					log_offset);
 	if (error)
 		return error;
 	*record_cnt = 0;
@@ -2318,8 +2316,7 @@ xlog_write_partial(
 	uint32_t		*log_offset,
 	uint32_t		*len,
 	uint32_t		*record_cnt,
-	uint32_t		*data_cnt,
-	int			*contwr)
+	uint32_t		*data_cnt)
 {
 	struct xlog_in_core	*iclog = *iclogp;
 	struct xlog_op_header	*ophdr;
@@ -2347,7 +2344,7 @@ xlog_write_partial(
 					sizeof(struct xlog_op_header)) {
 			error = xlog_write_get_more_iclog_space(ticket,
 					&iclog, log_offset, *len, record_cnt,
-					data_cnt, contwr);
+					data_cnt);
 			if (error)
 				return error;
 		}
@@ -2399,7 +2396,7 @@ xlog_write_partial(
 			error = xlog_write_get_more_iclog_space(ticket,
 					&iclog, log_offset,
 					*len + sizeof(struct xlog_op_header),
-					record_cnt, data_cnt, contwr);
+					record_cnt, data_cnt);
 			if (error)
 				return error;
 
@@ -2494,7 +2491,6 @@ xlog_write(
 {
 	struct xlog_in_core	*iclog = NULL;
 	struct xfs_log_vec	*lv = log_vector;
-	int			contwr = 0;
 	uint32_t		record_cnt = 0;
 	uint32_t		data_cnt = 0;
 	int			error = 0;
@@ -2508,7 +2504,7 @@ xlog_write(
 	}
 
 	error = xlog_state_get_iclog_space(log, len, &iclog, ticket,
-					   &contwr, &log_offset);
+					   &log_offset);
 	if (error)
 		return error;
 
@@ -2531,7 +2527,7 @@ xlog_write(
 		    lv->lv_bytes > iclog->ic_size - log_offset) {
 			error = xlog_write_partial(lv, ticket, &iclog,
 					&log_offset, &len, &record_cnt,
-					&data_cnt, &contwr);
+					&data_cnt);
 			if (error) {
 				/*
 				 * We have no iclog to release, so just return
@@ -2911,7 +2907,6 @@ xlog_state_get_iclog_space(
 	int			len,
 	struct xlog_in_core	**iclogp,
 	struct xlog_ticket	*ticket,
-	int			*continued_write,
 	int			*logoffsetp)
 {
 	int		  log_offset;
@@ -2989,13 +2984,10 @@ xlog_state_get_iclog_space(
 	 * iclogs (to mark it taken), this particular iclog will release/sync
 	 * to disk in xlog_write().
 	 */
-	if (len <= iclog->ic_size - iclog->ic_offset) {
-		*continued_write = 0;
+	if (len <= iclog->ic_size - iclog->ic_offset)
 		iclog->ic_offset += len;
-	} else {
-		*continued_write = 1;
+	else
 		xlog_state_switch_iclogs(log, iclog, iclog->ic_size);
-	}
 	*iclogp = iclog;
 
 	ASSERT(iclog->ic_offset <= iclog->ic_size);
Signature · 1 line
2.33.0
#29 lore raw

PATCH v6 15/16 xfs: xlog_write() doesn't need optype anymore

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

So remove it from the interface and callers.

---
 fs/xfs/xfs_log.c      | 4 +---
 fs/xfs/xfs_log_cil.c  | 6 ++----
 fs/xfs/xfs_log_priv.h | 2 +-
 3 files changed, 4 insertions(+), 8 deletions(-)
fs/xfs/xfs_log.c +1 -3
index 406c14dbe926..9c0890d05fc4 100644
@@ -966,8 +966,7 @@ xlog_write_unmount_record(
 	/* account for space used by record data */
 	ticket->t_curr_res -= sizeof(unmount_rec);
 
-	return xlog_write(log, NULL, &vec, ticket, XLOG_UNMOUNT_TRANS,
-			reg.i_len);
+	return xlog_write(log, NULL, &vec, ticket, reg.i_len);
 }
 
 /*
@@ -2485,7 +2484,6 @@ xlog_write(
 	struct xfs_cil_ctx	*ctx,
 	struct xfs_log_vec	*log_vector,
 	struct xlog_ticket	*ticket,
-	uint			optype,
 	uint32_t		len)
 
 {
fs/xfs/xfs_log_cil.c +2 -4
index 00243939b220..a31fb47c60f8 100644
@@ -800,8 +800,7 @@ xlog_cil_write_chain(
 	error = xlog_cil_order_write(ctx->cil, ctx->sequence, _START_RECORD);
 	if (error)
 		return error;
-	return xlog_write(log, ctx, chain, ctx->ticket, XLOG_START_TRANS,
-			chain_len);
+	return xlog_write(log, ctx, chain, ctx->ticket, chain_len);
 }
 
 /*
@@ -840,8 +839,7 @@ xlog_cil_write_commit_record(
 
 	/* account for space used by record data */
 	ctx->ticket->t_curr_res -= reg.i_len;
-	error = xlog_write(log, ctx, &vec, ctx->ticket, XLOG_COMMIT_TRANS,
-			reg.i_len);
+	error = xlog_write(log, ctx, &vec, ctx->ticket, reg.i_len);
 	if (error)
 		xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
 	return error;
fs/xfs/xfs_log_priv.h +1 -1
index 8c98b57e2a63..3008c0c884c7 100644
@@ -480,7 +480,7 @@ void	xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
 void	xlog_print_trans(struct xfs_trans *);
 int	xlog_write(struct xlog *log, struct xfs_cil_ctx *ctx,
 		struct xfs_log_vec *log_vector, struct xlog_ticket *tic,
-		uint optype, uint32_t len);
+		uint32_t len);
 void	xfs_log_ticket_ungrant(struct xlog *log, struct xlog_ticket *ticket);
 void	xfs_log_ticket_regrant(struct xlog *log, struct xlog_ticket *ticket);
 
Signature · 1 line
2.33.0
#31 lore raw

PATCH v6 16/16 xfs: CIL context doesn't need to count iovecs

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

Now that we account for log opheaders in the log item formatting code, we don't actually use the aggregated count of log iovecs in the CIL for anything. Remove it and the tracking code that calculates it.

---
 fs/xfs/xfs_log_cil.c  | 22 ++++++----------------
 fs/xfs/xfs_log_priv.h |  1 -
 2 files changed, 6 insertions(+), 17 deletions(-)
fs/xfs/xfs_log_cil.c +6 -16
index a31fb47c60f8..b8d8fc474dd1 100644
@@ -260,22 +260,18 @@ xlog_cil_alloc_shadow_bufs(
 
 /*
  * Prepare the log item for insertion into the CIL. Calculate the difference in
- * log space and vectors it will consume, and if it is a new item pin it as
- * well.
+ * log space it will consume, and if it is a new item pin it as well.
  */
 STATIC void
 xfs_cil_prepare_item(
 	struct xlog		*log,
 	struct xfs_log_vec	*lv,
 	struct xfs_log_vec	*old_lv,
-	int			*diff_len,
-	int			*diff_iovecs)
+	int			*diff_len)
 {
 	/* Account for the new LV being passed in */
-	if (lv->lv_buf_len != XFS_LOG_VEC_ORDERED) {
+	if (lv->lv_buf_len != XFS_LOG_VEC_ORDERED)
 		*diff_len += lv->lv_bytes;
-		*diff_iovecs += lv->lv_niovecs;
-	}
 
 	/*
 	 * If there is no old LV, this is the first time we've seen the item in
@@ -292,7 +288,6 @@ xfs_cil_prepare_item(
 		ASSERT(lv->lv_buf_len != XFS_LOG_VEC_ORDERED);
 
 		*diff_len -= old_lv->lv_bytes;
-		*diff_iovecs -= old_lv->lv_niovecs;
 		lv->lv_item->li_lv_shadow = old_lv;
 	}
 
@@ -341,12 +336,10 @@ static void
 xlog_cil_insert_format_items(
 	struct xlog		*log,
 	struct xfs_trans	*tp,
-	int			*diff_len,
-	int			*diff_iovecs)
+	int			*diff_len)
 {
 	struct xfs_log_item	*lip;
 
-
 	/* Bail out if we didn't find a log item.  */
 	if (list_empty(&tp->t_items)) {
 		ASSERT(0);
@@ -389,7 +382,6 @@ xlog_cil_insert_format_items(
 			 * set the item up as though it is a new insertion so
 			 * that the space reservation accounting is correct.
 			 */
-			*diff_iovecs -= lv->lv_niovecs;
 			*diff_len -= lv->lv_bytes;
 
 			/* Ensure the lv is set up according to ->iop_size */
@@ -414,7 +406,7 @@ xlog_cil_insert_format_items(
 		ASSERT(IS_ALIGNED((unsigned long)lv->lv_buf, sizeof(uint64_t)));
 		lip->li_ops->iop_format(lip, lv);
 insert:
-		xfs_cil_prepare_item(log, lv, old_lv, diff_len, diff_iovecs);
+		xfs_cil_prepare_item(log, lv, old_lv, diff_len);
 	}
 }
 
@@ -434,7 +426,6 @@ xlog_cil_insert_items(
 	struct xfs_cil_ctx	*ctx = cil->xc_ctx;
 	struct xfs_log_item	*lip;
 	int			len = 0;
-	int			diff_iovecs = 0;
 	int			iclog_space;
 	int			iovhdr_res = 0, split_res = 0, ctx_res = 0;
 
@@ -444,7 +435,7 @@ xlog_cil_insert_items(
 	 * We can do this safely because the context can't checkpoint until we
 	 * are done so it doesn't matter exactly how we update the CIL.
 	 */
-	xlog_cil_insert_format_items(log, tp, &len, &diff_iovecs);
+	xlog_cil_insert_format_items(log, tp, &len);
 
 	spin_lock(&cil->xc_cil_lock);
 
@@ -479,7 +470,6 @@ xlog_cil_insert_items(
 	}
 	tp->t_ticket->t_curr_res -= len;
 	ctx->space_used += len;
-	ctx->nvecs += diff_iovecs;
 
 	/*
 	 * If we've overrun the reservation, dump the tx details before we move
fs/xfs/xfs_log_priv.h +0 -1
index 3008c0c884c7..a3981567c42a 100644
@@ -221,7 +221,6 @@ struct xfs_cil_ctx {
 	xfs_lsn_t		commit_lsn;	/* chkpt commit record lsn */
 	struct xlog_in_core	*commit_iclog;
 	struct xlog_ticket	*ticket;	/* chkpt ticket */
-	int			nvecs;		/* number of regions */
 	int			space_used;	/* aggregate size of regions */
 	struct list_head	busy_extents;	/* busy extents in chkpt */
 	struct xfs_log_vec	*lv_chain;	/* logvecs being pushed */
Signature · 1 line
2.33.0