KVM: nVMX: Fix VPID + !EPT TLB bugs
Sean Christopherson
maintainercover KVM: nVMX: Fix VPID + !EPT TLB bugs
Fix two bugs reported by Lai where KVM mishandles guest-scoped TLB flushes when L2 is active. Bugs confirmed (and confirmed fixed) by the VPID+access test (patches posted for kvm-unit-tests).
Sean Christopherson (2):
KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST
KVM: nVMX: Emulate guest TLB flush on nested VM-Enter with new vpid12
arch/x86/kvm/vmx/nested.c | 45 +++++++++++++++++---------------------- arch/x86/kvm/vmx/vmx.c | 23 ++++++++++++-------- arch/x86/kvm/x86.c | 28 ++++++++++++++++++++---- arch/x86/kvm/x86.h | 7 +----- 4 files changed, 59 insertions(+), 44 deletions(-)
Signature · 1 line
2.34.0.rc2.393.gf8c9666880-goog
Sean Christopherson
maintainerPATCH 1/2 KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST
Flush the current VPID when handling KVM_REQ_TLB_FLUSH_GUEST instead of always flushing vpid01. Any TLB flush that is triggered when L2 is active is scoped to L2's VPID (if it has one), e.g. if L2 toggles CR4.PGE and L1 doesn't intercept PGE writes, then KVM's emulation of the TLB flush needs to be applied to L2's VPID.
Like KVM_REQ_TLB_FLUSH_CURRENT, the GUEST variant needs to be serviced at nested transitions, as KVM doesn't track requests for L1 vs L2. E.g. if there's a pending flush when a nested VM-Exit occurs, then the flush was requested in the context of L2 and needs to be handled before switching to L1, otherwise the flush for L2 would effectiely be lost.
Opportunistically add a helper to handle CURRENT and GUEST as a pair, the logic for when they need to be serviced is identical as both requests are tied to L1 vs. L2, the only difference is the scope of the flush.
--- arch/x86/kvm/vmx/nested.c | 8 +++----- arch/x86/kvm/vmx/vmx.c | 23 ++++++++++++++--------- arch/x86/kvm/x86.c | 28 ++++++++++++++++++++++++---- arch/x86/kvm/x86.h | 7 +------ 4 files changed, 42 insertions(+), 24 deletions(-)
arch/x86/kvm/vmx/nested.c +3 -5
@@ -3344,8 +3344,7 @@ enum nvmx_vmentry_status nested_vmx_enter_non_root_mode(struct kvm_vcpu *vcpu, };u32 failed_index; -if (kvm_check_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu)) -kvm_vcpu_flush_tlb_current (vcpu); +kvm_service_local_tlb_flush_requests (vcpu); evaluate_pending_interrupts =exec_controls_get (vmx) & (CPU_BASED_INTR_WINDOW_EXITING |CPU_BASED_NMI_WINDOW_EXITING );
@@ -4502,9 +4501,8 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 vm_exit_reason, (void )nested_get_evmcs_page (vcpu); } -/* Service the TLB flush request for L2 before switching to L1. */ -if (kvm_check_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu)) -kvm_vcpu_flush_tlb_current (vcpu); +/* Service pending TLB flush requests for L2 before switching to L1. */ +kvm_service_local_tlb_flush_requests (vcpu);/* * VCPU_EXREG_PDPTR will be clobbered in arch/x86/kvm/vmx/vmx.h between
arch/x86/kvm/vmx/vmx.c +14 -9
@@ -2918,6 +2918,13 @@ static void vmx_flush_tlb_all(struct kvm_vcpu *vcpu) } } +static inline int vmx_get_current_vpid (struct kvm_vcpu *vcpu) +{ +if (is_guest_mode (vcpu)) +return nested_get_vpid02 (vcpu); +return to_vmx (vcpu)->vpid; +} +static void vmx_flush_tlb_current (struct kvm_vcpu *vcpu) {struct kvm_mmu *mmu = vcpu->arch.mmu;
@@ -2930,31 +2937,29 @@ static void vmx_flush_tlb_current(struct kvm_vcpu *vcpu)if (enable_ept)ept_sync_context (construct_eptp (vcpu, root_hpa, mmu->shadow_root_level)); -else if (!is_guest_mode (vcpu)) -vpid_sync_context (to_vmx (vcpu)->vpid);else -vpid_sync_context (nested_get_vpid02 (vcpu)); +vpid_sync_context (vmx_get_current_vpid (vcpu)); }static void vmx_flush_tlb_gva (struct kvm_vcpu *vcpu,gva_t addr) {/* -* vpid_sync_vcpu_addr() is a nop if vmx->vpid==0, see the comment in +* vpid_sync_vcpu_addr() is a nop if vpid==0, see the comment in * vmx_flush_tlb_guest() for an explanation of why this is ok. */ -vpid_sync_vcpu_addr (to_vmx (vcpu)->vpid, addr); +vpid_sync_vcpu_addr (vmx_get_current_vpid (vcpu), addr); }static void vmx_flush_tlb_guest (struct kvm_vcpu *vcpu) {/* -* vpid_sync_context() is a nop if vmx->vpid==0, e.g. if enable_vpid==0 -* or a vpid couldn't be allocated for this vCPU. VM-Enter and VM-Exit -* are required to flush GVA->{G,H}PA mappings from the TLB if vpid is +* vpid_sync_context() is a nop if vpid==0, e.g. if enable_vpid==0 or a +* vpid couldn't be allocated for this vCPU. VM-Enter and VM-Exit are +* required to flush GVA->{G,H}PA mappings from the TLB if vpid is * disabled (VM-Enter with vpid enabled and vpid==0 is disallowed), * i.e. no explicit INVVPID is necessary. */ -vpid_sync_context (to_vmx (vcpu)->vpid); +vpid_sync_context (vmx_get_current_vpid (vcpu)); }void vmx_ept_load_pdptrs (struct kvm_vcpu *vcpu)
arch/x86/kvm/x86.c +24 -4
@@ -3258,6 +3258,29 @@ static void kvm_vcpu_flush_tlb_guest(struct kvm_vcpu *vcpu)static_call (kvm_x86_tlb_flush_guest)(vcpu); } + +static inline void kvm_vcpu_flush_tlb_current (struct kvm_vcpu *vcpu) +{ + ++vcpu->stat.tlb_flush; +static_call (kvm_x86_tlb_flush_current)(vcpu); +} + +/* +* Service "local" TLB flush requests, which are specific to the current MMU +* context. In addition to the generic event handling in vcpu_enter_guest(), +* TLB flushes that are targeted at an MMU context also need to be serviced +* prior before nested VM-Enter/VM-Exit. +*/ +void kvm_service_local_tlb_flush_requests (struct kvm_vcpu *vcpu) +{ +if (kvm_check_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu)) +kvm_vcpu_flush_tlb_current (vcpu); + +if (kvm_check_request (KVM_REQ_TLB_FLUSH_GUEST , vcpu)) +kvm_vcpu_flush_tlb_guest (vcpu); +} +EXPORT_SYMBOL_GPL (kvm_service_local_tlb_flush_requests); +static void record_steal_time (struct kvm_vcpu *vcpu) {struct gfn_to_hva_cache *ghc = &vcpu->arch.st.cache;
@@ -9653,10 +9676,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)/* Flushing all ASIDs flushes the current ASID... */ kvm_clear_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu); } -if (kvm_check_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu)) -kvm_vcpu_flush_tlb_current (vcpu); -if (kvm_check_request (KVM_REQ_TLB_FLUSH_GUEST , vcpu)) -kvm_vcpu_flush_tlb_guest (vcpu); +kvm_service_local_tlb_flush_requests (vcpu);if (kvm_check_request (KVM_REQ_REPORT_TPR_ACCESS , vcpu)) { vcpu->run->exit_reason =KVM_EXIT_TPR_ACCESS ;
arch/x86/kvm/x86.h +1 -6
@@ -103,6 +103,7 @@ static inline unsigned int __shrink_ple_window(unsigned int val,#define MSR_IA32_CR_PAT_DEFAULT 0x0007040600070406ULL +void kvm_service_local_tlb_flush_requests (struct kvm_vcpu *vcpu);int kvm_check_nested_events (struct kvm_vcpu *vcpu);static inline void kvm_clear_exception_queue (struct kvm_vcpu *vcpu)
@@ -185,12 +186,6 @@ static inline bool mmu_is_nested(struct kvm_vcpu *vcpu)return vcpu->arch.walk_mmu == &vcpu->arch.nested_mmu; } -static inline void kvm_vcpu_flush_tlb_current (struct kvm_vcpu *vcpu) -{ - ++vcpu->stat.tlb_flush; -static_call (kvm_x86_tlb_flush_current)(vcpu); -} -static inline int is_pae (struct kvm_vcpu *vcpu) {return kvm_read_cr4_bits (vcpu,X86_CR4_PAE );
Signature · 1 line
2.34.0.rc2.393.gf8c9666880-goog
Re: [PATCH 1/2] KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST
Quoted 1 line · Sean Christopherson
Reported-by Lai Jiangshan <[email protected]>
Oh, I just noticed that I made an incorrect configuration in Gmail. I hope it be
when it comes to "Reviewed-by", "Reported-by" as my email address in the file MAINTAINERS.
Sean Christopherson
maintainerPATCH 2/2 KVM: nVMX: Emulate guest TLB flush on nested VM-Enter with new vpid12
In reply to Sean ChristophersonFully emulate a guest TLB flush on nested VM-Enter which changes vpid12, i.e. L2's VPID, instead of simply doing INVVPID to flush real hardware's TLB entries for vpid02. From L1's perspective, changing L2's VPID is effectively a TLB flush unless "hardware" has previously cached entries for the new vpid12. Because KVM tracks only a single vpid12, KVM doesn't know if the new vpid12 has been used in the past and so must treat it as a brand new, never been used VPID, i.e. must assume that the new vpid12 represents a TLB flush from L1's perspective.
For example, if L1 and L2 share a CR3, the first VM-Enter to L2 (with a VPID) is effectively a TLB flush as hardware/KVM has never seen vpid12 and thus can't have cached entries in the TLB for vpid12.
--- arch/x86/kvm/vmx/nested.c | 37 +++++++++++++++++-------------------- 1 file changed, 17 insertions(+), 20 deletions(-)
arch/x86/kvm/vmx/nested.c +17 -20
@@ -1162,29 +1162,26 @@ static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu,WARN_ON (!enable_vpid);/* -* If VPID is enabled and used by vmc12, but L2 does not have a unique -* TLB tag (ASID), i.e. EPT is disabled and KVM was unable to allocate -* a VPID for L2, flush the current context as the effective ASID is -* common to both L1 and L2. -* -* Defer the flush so that it runs after vmcs02.EPTP has been set by -* KVM_REQ_LOAD_MMU_PGD (if nested EPT is enabled) and to avoid -* redundant flushes further down the nested pipeline. -* -* If a TLB flush isn't required due to any of the above, and vpid12 is -* changing then the new "virtual" VPID (vpid12) will reuse the same -* "real" VPID (vpid02), and so needs to be flushed. There's no direct -* mapping between vpid02 and vpid12, vpid02 is per-vCPU and reused for -* all nested vCPUs. Remember, a flush on VM-Enter does not invalidate -* guest-physical mappings, so there is no need to sync the nEPT MMU. +* VPID is enabled and in use by vmcs12. If vpid12 is changing, then +* emulate a guest TLB flush as KVM does not track vpid12 history nor +* is the VPID incorporated into the MMU context. I.e. KVM must assume +* that the new vpid12 has never been used and thus represents a new +* guest ASID that cannot have entries in the TLB. */ -if (!nested_has_guest_tlb_tag (vcpu)) { -kvm_make_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu); - }else if (is_vmenter && - vmcs12->virtual_processor_id != vmx->nested.last_vpid) { +if (is_vmenter && vmcs12->virtual_processor_id != vmx->nested.last_vpid) { vmx->nested.last_vpid = vmcs12->virtual_processor_id; -vpid_sync_context (nested_get_vpid02 (vcpu)); +kvm_make_request (KVM_REQ_TLB_FLUSH_GUEST , vcpu); +return ; } + +/* +* If VPID is enabled, used by vmc12, and vpid12 is not changing but +* does not have a unique TLB tag (ASID), i.e. EPT is disabled and +* KVM was unable to allocate a VPID for L2, flush the current context +* as the effective ASID is common to both L1 and L2. +*/ +if (!nested_has_guest_tlb_tag (vcpu)) +kvm_make_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu); }static bool is_bitwise_subset (u64 superset,u64 subset,u64 mask)
Signature · 1 line
2.34.0.rc2.393.gf8c9666880-goog
Re: [PATCH 2/2] KVM: nVMX: Emulate guest TLB flush on nested VM-Enter with new vpid12
Quoted 47 lines · Sean Christopherson
Fully emulate a guest TLB flush on nested VM-Enter which changes vpid12, i.e. L2's VPID, instead of simply doing INVVPID to flush real hardware's TLB entries for vpid02. From L1's perspective, changing L2's VPID is effectively a TLB flush unless "hardware" has previously cached entries for the new vpid12. Because KVM tracks only a single vpid12, KVM doesn't know if the new vpid12 has been used in the past and so must treat it as a brand new, never been used VPID, i.e. must assume that the new vpid12 represents a TLB flush from L1's perspective.
For example, if L1 and L2 share a CR3, the first VM-Enter to L2 (with a VPID) is effectively a TLB flush as hardware/KVM has never seen vpid12 and thus can't have cached entries in the TLB for vpid12.
Reported-by Lai Jiangshan <[email protected]>Fixes 5c614b3583e7 ("KVM: nVMX: nested VPID emulation")Signed-off-by Sean Christopherson <[email protected]>--- arch/x86/kvm/vmx/nested.c | 37 +++++++++++++++++-------------------- 1 file changed, 17 insertions(+), 20 deletions(-)arch/x86/kvm/vmx/nested.c +2
-15@@ -1162,29 +1162,26 @@ static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu,WARN_ON (!enable_vpid);/* -* If VPID is enabled and used by vmc12, but L2 does not have a unique -* TLB tag (ASID), i.e. EPT is disabled and KVM was unable to allocate -* a VPID for L2, flush the current context as the effective ASID is -* common to both L1 and L2. -* -* Defer the flush so that it runs after vmcs02.EPTP has been set by -* KVM_REQ_LOAD_MMU_PGD (if nested EPT is enabled) and to avoid -* redundant flushes further down the nested pipeline. -* -* If a TLB flush isn't required due to any of the above, and vpid12 is -* changing then the new "virtual" VPID (vpid12) will reuse the same -* "real" VPID (vpid02), and so needs to be flushed. There's no direct -* mapping between vpid02 and vpid12, vpid02 is per-vCPU and reused for -* all nested vCPUs. Remember, a flush on VM-Enter does not invalidate -* guest-physical mappings, so there is no need to sync the nEPT MMU. +* VPID is enabled and in use by vmcs12. If vpid12 is changing, then +* emulate a guest TLB flush as KVM does not track vpid12 history nor
arch/x86/kvm/vmx/nested.c static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu, · line 1172
Quoted 10 lines
arch/x86/kvm/vmx/nested.c +4
-4+* is the VPID incorporated into the MMU context. I.e. KVM must assume +* that the new vpid12 has never been used and thus represents a new +* guest ASID that cannot have entries in the TLB. */ -if (!nested_has_guest_tlb_tag (vcpu)) { -kvm_make_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu); - }else if (is_vmenter && - vmcs12->virtual_processor_id != vmx->nested.last_vpid) { +if (is_vmenter && vmcs12->virtual_processor_id != vmx->nested.last_vpid) { vmx->nested.last_vpid = vmcs12->virtual_processor_id;
How about when vmx->nested.last_vpid == vmcs12->virtual_processor_id == 0?
I think KVM_REQ_TLB_FLUSH_GUEST is needed in this case too.
Quoted 19 lines
arch/x86/kvm/vmx/nested.c +11
-2-vpid_sync_context (nested_get_vpid02 (vcpu)); +kvm_make_request (KVM_REQ_TLB_FLUSH_GUEST , vcpu); +return ; } + +/* +* If VPID is enabled, used by vmc12, and vpid12 is not changing but +* does not have a unique TLB tag (ASID), i.e. EPT is disabled and +* KVM was unable to allocate a VPID for L2, flush the current context +* as the effective ASID is common to both L1 and L2. +*/ +if (!nested_has_guest_tlb_tag (vcpu)) +kvm_make_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu); }static bool is_bitwise_subset (u64 superset,u64 subset,u64 mask) --2.34.0.rc2.393.gf8c9666880-goog
Sean Christopherson
maintainerRe: [PATCH 2/2] KVM: nVMX: Emulate guest TLB flush on nested VM-Enter with new vpid12
Quoted 39 lines · Lai Jiangshan
Quoted 25 lines · Sean Christopherson
arch/x86/kvm/vmx/nested.c +2
-15@@ -1162,29 +1162,26 @@ static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu,WARN_ON (!enable_vpid);/* -* If VPID is enabled and used by vmc12, but L2 does not have a unique -* TLB tag (ASID), i.e. EPT is disabled and KVM was unable to allocate -* a VPID for L2, flush the current context as the effective ASID is -* common to both L1 and L2. -* -* Defer the flush so that it runs after vmcs02.EPTP has been set by -* KVM_REQ_LOAD_MMU_PGD (if nested EPT is enabled) and to avoid -* redundant flushes further down the nested pipeline. -* -* If a TLB flush isn't required due to any of the above, and vpid12 is -* changing then the new "virtual" VPID (vpid12) will reuse the same -* "real" VPID (vpid02), and so needs to be flushed. There's no direct -* mapping between vpid02 and vpid12, vpid02 is per-vCPU and reused for -* all nested vCPUs. Remember, a flush on VM-Enter does not invalidate -* guest-physical mappings, so there is no need to sync the nEPT MMU. +* VPID is enabled and in use by vmcs12. If vpid12 is changing, then +* emulate a guest TLB flush as KVM does not track vpid12 history nor arch/x86/kvm/vmx/nested.c static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu, · line 1172
Quoted 10 lines
arch/x86/kvm/vmx/nested.c +4
-4+* is the VPID incorporated into the MMU context. I.e. KVM must assume +* that the new vpid12 has never been used and thus represents a new +* guest ASID that cannot have entries in the TLB. */ -if (!nested_has_guest_tlb_tag (vcpu)) { -kvm_make_request (KVM_REQ_TLB_FLUSH_CURRENT , vcpu); - }else if (is_vmenter && - vmcs12->virtual_processor_id != vmx->nested.last_vpid) { +if (is_vmenter && vmcs12->virtual_processor_id != vmx->nested.last_vpid) { vmx->nested.last_vpid = vmcs12->virtual_processor_id;How about when
vmx->nested.last_vpid==vmcs12->virtual_processor_id== 0?
Quoted 1 line
I think
KVM_REQ_TLB_FLUSH_GUESTis needed in this case too.
That's handled by code that's just out of sight in this diff. The first check in nested_vmx_transition_tlb_flush() is to see if vmcs12 has VPID enabled. If the code in this patch is reached, vmcs12->virtual_processor_id is guaranteed to be non-zero as VM-Enter fails if VPID is enabled but VPID==0.
static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu,
struct vmcs12 *vmcs12, bool is_vmenter)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
/*
* If vmcs12 doesn't use VPID, L1 expects linear and combined mappings
* for *all* contexts to be flushed on VM-Enter/VM-Exit, i.e. it's a
* full TLB flush from the guest's perspective. This is required even
* if VPID is disabled in the host as KVM may need to synchronize the
* MMU in response to the guest TLB flush.
*
* Note, using TLB_FLUSH_GUEST is correct even if nested EPT is in use.
* EPT is a special snowflake, as guest-physical mappings aren't
* flushed on VPID invalidations, including VM-Enter or VM-Exit with
* VPID disabled. As a result, KVM _never_ needs to sync nEPT
* entries on VM-Enter because L1 can't rely on VM-Enter to flush
* those mappings.
*/
if (!nested_cpu_has_vpid(vmcs12)) {
kvm_make_request(KVM_REQ_TLB_FLUSH_GUEST, vcpu); return;
}
...
}
Quoted 8 lines · Sean Christopherson
Fix two bugs reported by Lai where KVM mishandles guest-scoped TLB flushes when L2 is active. Bugs confirmed (and confirmed fixed) by the VPID+access test (patches posted for kvm-unit-tests).
Sean Christopherson (2):
KVM: nVMX: Flush current VPID (L1 vs. L2) forKVM_REQ_TLB_FLUSH_GUEST
KVM: nVMX: Emulate guest TLB flush on nested VM-Enter with new vpid12
Quoted 6 lines
arch/x86/kvm/vmx/nested.c | 45 +++++++++++++++++---------------------- arch/x86/kvm/vmx/vmx.c | 23 ++++++++++++-------- arch/x86/kvm/x86.c | 28 ++++++++++++++++++++---- arch/x86/kvm/x86.h | 7 +----- 4 files changed, 59 insertions(+), 44 deletions(-)
Queued, thanks (but I split the first in two).
Paolo