pwm: Add count to sysfs for Intel PWM driver
cover pwm: Add count to sysfs for Intel PWM driver
From: Vishakha Joshi <[email protected]>
Hi,
The patch 1 adds the count for PWM waveform to sysfs interface. The patch 2 updates the count in the KeemBay PWM driver.
Please help to review these patches.
Thanks,
Vishakha Joshi
Vishakha Joshi (2):
pwm: Add count to sysfs for Intel PWM driver
pwm: Update the REPEAT_COUNT value
Documentation/ABI/testing/sysfs-class-pwm | 8 ++++++ drivers/pwm/pwm-keembay.c | 9 ++++-- drivers/pwm/sysfs.c | 34 +++++++++++++++++++++++ include/linux/pwm.h | 2 ++ 4 files changed, 50 insertions(+), 3 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/2 pwm: Add count to sysfs for Intel PWM driver
From: Vishakha Joshi <[email protected]>
The number of cycles in the PWM waveform is generated according to the count value configured in the sysfs interface.
This helps to control the duration of the PWM waveform in the KeemBay SoC.
In case of default count value which is zero, the PWM waveform repeats indefinitely.
--- Documentation/ABI/testing/sysfs-class-pwm | 8 ++++++ drivers/pwm/sysfs.c | 34 +++++++++++++++++++++++ include/linux/pwm.h | 2 ++ 3 files changed, 44 insertions(+)
Documentation/ABI/testing/sysfs-class-pwm +8 -0
@@ -86,3 +86,11 @@ Description: Capture information about a PWM signal. The output format is a pair unsigned integers (period and duty cycle), separated by a single space. + +What: /sys/class/pwm/pwmchip<N>/pwmX/count +Date: December 2021 +KernelVersion: 5.17 +Contact: Vishakha Joshi <[email protected]> +Description: + The PWM repeat count of the number of cycles in the waveform. + The default value for the count is zero with infinite repetition.
drivers/pwm/sysfs.c +34 -0
@@ -215,11 +215,44 @@ static ssize_t capture_show(struct device *child,return sprintf (buf,"%u %u\n" , result.period, result.duty_cycle); } +static ssize_t count_store (struct device *child,struct device_attribute *attr,const char *buf, +size_t size) +{ +struct pwm_export *export =child_to_pwm_export (child); +struct pwm_device *pwm = export->pwm; +struct pwm_state state; +unsigned int count; +int ret; + + ret =kstrtouint (buf,0 , &count); +if (ret) +return ret; + +mutex_lock (&export->lock); +pwm_get_state (pwm, &state); + state.count = count; + ret =pwm_apply_state (pwm, &state); +mutex_unlock (&export->lock); + +return ret ?: size; +} + +static ssize_t count_show (struct device *child,struct device_attribute *attr,char *buf) +{ +const struct pwm_device *pwm =child_to_pwm_device (child); +struct pwm_state state; + +pwm_get_state (pwm, &state); + +return sysfs_emit (buf,"%d\n" , state.count); +} +static DEVICE_ATTR_RW (period);static DEVICE_ATTR_RW (duty_cycle);static DEVICE_ATTR_RW (enable);static DEVICE_ATTR_RW (polarity);static DEVICE_ATTR_RO (capture); +static DEVICE_ATTR_RW (count);static struct attribute *pwm_attrs[] = { &dev_attr_period.attr,
@@ -227,6 +260,7 @@ static struct attribute *pwm_attrs[] = { &dev_attr_enable.attr, &dev_attr_polarity.attr, &dev_attr_capture.attr, + &dev_attr_count.attr, NULL };ATTRIBUTE_GROUPS (pwm);
include/linux/pwm.h +2 -0
@@ -52,6 +52,7 @@ enum {* struct pwm_state - state of a PWM channel * @period: PWM period (in nanoseconds) * @duty_cycle: PWM duty cycle (in nanoseconds) +* @count: PWM repeat count * @polarity: PWM polarity * @enabled: PWM enabled status * @usage_power: If set, the PWM driver is only required to maintain the power
@@ -62,6 +63,7 @@ enum {struct pwm_state {u64 period;u64 duty_cycle; +u32 count;enum pwm_polarity polarity;bool enabled;bool usage_power;
Signature · 1 line
2.17.1
Hello,
Quoted 102 lines · On Mon, Jan 03, 2022 at 01:46:09PM +0530, [email protected] wrote:
From: Vishakha Joshi <[email protected]>
The number of cycles in the PWM waveform is generated according to the count value configured in the sysfs interface.
This helps to control the duration of the PWM waveform in the KeemBay SoC.
In case of default count value which is zero, the PWM waveform repeats indefinitely.Signed-off-by Vishakha Joshi <[email protected]>--- Documentation/ABI/testing/sysfs-class-pwm | 8 ++++++ drivers/pwm/sysfs.c | 34 +++++++++++++++++++++++ include/linux/pwm.h | 2 ++ 3 files changed, 44 insertions(+)Documentation/ABI/testing/sysfs-class-pwm +8
-0@@ -86,3 +86,11 @@ Description: Capture information about a PWM signal. The output format is a pair unsigned integers (period and duty cycle), separated by a single space. + +What: /sys/class/pwm/pwmchip<N>/pwmX/count +Date: December 2021 +KernelVersion: 5.17 +Contact: Vishakha Joshi <[email protected]> +Description: + The PWM repeat count of the number of cycles in the waveform. + The default value for the count is zero with infinite repetition.drivers/pwm/sysfs.c +34
-0@@ -215,11 +215,44 @@ static ssize_t capture_show(struct device *child,return sprintf (buf,"%u %u\n" , result.period, result.duty_cycle); } +static ssize_t count_store (struct device *child,struct device_attribute *attr,const char *buf, +size_t size) +{ +struct pwm_export *export =child_to_pwm_export (child); +struct pwm_device *pwm = export->pwm; +struct pwm_state state; +unsigned int count; +int ret; + + ret =kstrtouint (buf,0 , &count); +if (ret) +return ret; + +mutex_lock (&export->lock); +pwm_get_state (pwm, &state); + state.count = count; + ret =pwm_apply_state (pwm, &state); +mutex_unlock (&export->lock); + +return ret ?: size; +} + +static ssize_t count_show (struct device *child,struct device_attribute *attr,char *buf) +{ +const struct pwm_device *pwm =child_to_pwm_device (child); +struct pwm_state state; + +pwm_get_state (pwm, &state); + +return sysfs_emit (buf,"%d\n" , state.count); +} +static DEVICE_ATTR_RW (period);static DEVICE_ATTR_RW (duty_cycle);static DEVICE_ATTR_RW (enable);static DEVICE_ATTR_RW (polarity);static DEVICE_ATTR_RO (capture); +static DEVICE_ATTR_RW (count);static struct attribute *pwm_attrs[] = { &dev_attr_period.attr,@@ -227,6 +260,7 @@ static struct attribute *pwm_attrs[] = { &dev_attr_enable.attr, &dev_attr_polarity.attr, &dev_attr_capture.attr, + &dev_attr_count.attr, NULL };ATTRIBUTE_GROUPS (pwm);include/linux/pwm.h +1
-0@@ -52,6 +52,7 @@ enum {* struct pwm_state - state of a PWM channel * @period: PWM period (in nanoseconds) * @duty_cycle: PWM duty cycle (in nanoseconds) +* @count: PWM repeat count * @polarity: PWM polarity * @enabled: PWM enabled status * @usage_power: If set, the PWM driver is only required to maintain the power
include/linux/pwm.h enum { · line 69
Quoted 7 lines
include/linux/pwm.h +1
-0@@ -62,6 +63,7 @@ enum {struct pwm_state {u64 period;u64 duty_cycle; +u32 count;enum pwm_polarity polarity;bool enabled;bool usage_power;
This needs more documentation about what the semantic should be. E.g. what should .get_state return?
Also I doubt this is a good idea given that most controllers cannot implement it.
If we really want to support a count, I request that all drivers that don't support it get updated to refuse a request with count != 0.
Best regards
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
Quoted 2 lines · Uwe Kleine-König
Quoted 1 line · On Mon, Jan 03, 2022 at 01:46:09PM +0530, [email protected] wrote:
From: Vishakha Joshi <[email protected]>
...
Quoted 10 lines
include/linux/pwm.h enum { · line 69
Quoted 7 lines
struct
pwm_state{include/linux/pwm.h +1
-0u64 period;u64 duty_cycle; +u32 count;enum pwm_polarity polarity;bool enabled;bool usage_power;This needs more documentation about what the semantic should be. E.g. what should .get_state return?
Good point. I guess ideally we should return the amount of the periods we still need to produce, but I'm not sure if it can be done cleanly.
It would probably require a timer to be run in parallel, hence almost full software implementation of the feature. (This answers the second concern)
Quoted 5 lines
Also I doubt this is a good idea given that most controllers cannot implement it.
If we really want to support a count, I request that all drivers that don't support it get updated to refuse a request with count != 0.
Hmm... Not sure it worth it, perhaps taking into account above the -1 (in unsigned type) returned on ->get_state() can suffice as not supporting feature?
Signature · 2 lines
With Best Regards, Andy Shevchenko
Hello,
Quoted 7 lines · Andy Shevchenko
Quoted 2 lines · Uwe Kleine-König
If we really want to support a count, I request that all drivers that don't support it get updated to refuse a request with count != 0.
Hmm... Not sure it worth it, perhaps taking into account above the -1 (in unsigned type) returned on ->get_state() can suffice as not supporting feature?
In my eyes that's a bad idea. You have to touch most drivers anyhow to set the -1. So the outcome is the worst possible combination: Many changes and still much implicit logic distributed between the drivers and the core about what is supported and what not.
(Or you have to initialize .count = -1 before calling the get_state callback. Then you get rid of "have to touch most drivers". But that's still ugly IMO.)
Best regards
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
PATCH 2/2 pwm: Update the REPEAT_COUNT value
In reply to [email protected]From: Vishakha Joshi <[email protected]>
Update the count value in the PWM_LEADIN register.
--- drivers/pwm/pwm-keembay.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/pwm/pwm-keembay.c +6 -3
@@ -128,11 +128,14 @@ static int keembay_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,if (state->polarity !=PWM_POLARITY_NORMAL )return -EINVAL ; +if (state->count >KMB_PWM_COUNT_MAX ) +return -EINVAL ; +/* -* Configure the pwm repeat count as infinite at (15:0) and leadin -* low time as 0 at (30:16), which is in terms of clock cycles. +* Configure the PWM repeat count at (15:0) and LEADIN low time as 0 at +* (30:16), which is in terms of clock cycles. */ -keembay_pwm_update_bits (priv,KMB_PWM_LEADIN_MASK ,0 , +keembay_pwm_update_bits (priv,KMB_PWM_LEADIN_MASK , state->count,KMB_PWM_LEADIN_OFFSET (pwm->hwpwm));keembay_pwm_get_state (chip, pwm, ¤t_state);
Signature · 1 line
2.17.1