Skip to contentSkip to conversation

soc: qcom: llcc: Add LLCC support for SM8450 SoC

PATCH Applied Sai Prakash Ranjan 4 participants 15 messages Jan 28, 2022 – Feb 11, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover soc: qcom: llcc: Add LLCC support for SM8450 SoC

This patch series adds support for LLCC on SM8450 SoC. It mainly consists of LLCC driver changes to incorporate newer LLCC HW found on SM8450 SoC and the corresponding DT bits to enable LLCC. Based on qcom/for-next branch.

Changes in v2:
* Fix version assignment to drv_data.

Huang Yiwei (1):
soc: qcom: llcc: Add support for 16 ways of allocation

Sai Prakash Ranjan (8):
soc: qcom: llcc: Update the logic for version info extraction
soc: qcom: llcc: Add write-cache cacheable support
soc: qcom: llcc: Add missing llcc configuration data
soc: qcom: llcc: Update register offsets for newer LLCC HW
soc: qcom: llcc: Add configuration data for SM8450 SoC
dt-bindings: arm: msm: Add LLCC compatible for SM8350
dt-bindings: arm: msm: Add LLCC compatible for SM8450
arm64: dts: qcom: sm8450: Add LLCC/system-cache-controller node

 .../bindings/arm/msm/qcom,llcc.yaml           |   2 +
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |   7 ++
 drivers/soc/qcom/llcc-qcom.c                  | 102 +++++++++++++++---
 include/linux/soc/qcom/llcc-qcom.h            |   9 +-
 4 files changed, 105 insertions(+), 15 deletions(-)
Signature · 1 line
2.33.1
#1 lore raw

PATCH v2 1/9 soc: qcom: llcc: Add support for 16 ways of allocation

From: Huang Yiwei <[email protected]>

Add support for 16 ways of allocation for LLCC HW version 2.1.0 and later.

---
 drivers/soc/qcom/llcc-qcom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/soc/qcom/llcc-qcom.c +2 -2
index ec52f29c8867..b3a34f117a7c 100644
@@ -29,8 +29,8 @@
 #define ATTR1_FIXED_SIZE_SHIFT        0x03
 #define ATTR1_PRIORITY_SHIFT          0x04
 #define ATTR1_MAX_CAP_SHIFT           0x10
-#define ATTR0_RES_WAYS_MASK           GENMASK(11, 0)
-#define ATTR0_BONUS_WAYS_MASK         GENMASK(27, 16)
+#define ATTR0_RES_WAYS_MASK           GENMASK(15, 0)
+#define ATTR0_BONUS_WAYS_MASK         GENMASK(31, 16)
 #define ATTR0_BONUS_WAYS_SHIFT        0x10
 #define LLCC_STATUS_READ_DELAY        100
 
Signature · 1 line
2.33.1
#2 lore raw

PATCH v2 2/9 soc: qcom: llcc: Update the logic for version info extraction

In reply to Sai Prakash Ranjan

LLCC HW version info is made up of major, branch, minor and echo version bits each of which are 8bits. Several features in newer LLCC HW are based on the full version rather than just major or minor versions such as write-subcache enable which is applicable for versions v2.0.0.0 and later, also upcoming write-subcache cacheable for SM8450 SoC which is only present in versions v2.1.0.0 and later, so it makes it easier and cleaner to just directly compare with the full version than adding additional major/branch/ minor/echo version checks. So remove the earlier major version check and add full version check for those features.

---
 drivers/soc/qcom/llcc-qcom.c       | 9 +++++----
 include/linux/soc/qcom/llcc-qcom.h | 4 ++--
 2 files changed, 7 insertions(+), 6 deletions(-)
drivers/soc/qcom/llcc-qcom.c +5 -4
index b3a34f117a7c..8d4953800fa9 100644
@@ -37,7 +37,6 @@
 #define CACHE_LINE_SIZE_SHIFT         6
 
 #define LLCC_COMMON_HW_INFO           0x00030000
-#define LLCC_MAJOR_VERSION_MASK       GENMASK(31, 24)
 
 #define LLCC_COMMON_STATUS0           0x0003000c
 #define LLCC_LB_CNT_MASK              GENMASK(31, 28)
@@ -55,6 +54,8 @@
 
 #define BANK_OFFSET_STRIDE	      0x80000
 
+#define LLCC_VERSION_2_0_0_0          0x02000000
+
 /**
  * struct llcc_slice_config - Data associated with the llcc slice
  * @usecase_id: Unique id for the client's use case
@@ -504,7 +505,7 @@ static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config,
 			return ret;
 	}
 
-	if (drv_data->major_version == 2) {
+	if (drv_data->version >= LLCC_VERSION_2_0_0_0) {
 		u32 wren;
 
 		wren = config->write_scid_en << config->slice_id;
@@ -598,12 +599,12 @@ static int qcom_llcc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	/* Extract major version of the IP */
+	/* Extract version of the IP */
 	ret = regmap_read(drv_data->bcast_regmap, LLCC_COMMON_HW_INFO, &version);
 	if (ret)
 		goto err;
 
-	drv_data->major_version = FIELD_GET(LLCC_MAJOR_VERSION_MASK, version);
+	drv_data->version = version;
 
 	ret = regmap_read(drv_data->regmap, LLCC_COMMON_STATUS0,
 						&num_banks);
include/linux/soc/qcom/llcc-qcom.h +2 -2
index 9e8fd92c96b7..beecf00b707d 100644
@@ -83,7 +83,7 @@ struct llcc_edac_reg_data {
  * @bitmap: Bit map to track the active slice ids
  * @offsets: Pointer to the bank offsets array
  * @ecc_irq: interrupt for llcc cache error detection and reporting
- * @major_version: Indicates the LLCC major version
+ * @version: Indicates the LLCC version
  */
 struct llcc_drv_data {
 	struct regmap *regmap;
@@ -96,7 +96,7 @@ struct llcc_drv_data {
 	unsigned long *bitmap;
 	u32 *offsets;
 	int ecc_irq;
-	u32 major_version;
+	u32 version;
 };
 
 #if IS_ENABLED(CONFIG_QCOM_LLCC)
Signature · 1 line
2.33.1
#3 lore raw

PATCH v2 3/9 soc: qcom: llcc: Add write-cache cacheable support

In reply to Sai Prakash Ranjan

Newer SoCs with LLCC IP version 2.1.0.0 and later support write sub-cache cacheable feature. Use a separate llcc_slice_config member "write_scid_cacheable_en" to identify this feature and program LLCC_TRP_SCID_WRSC_CACHEABLE_EN register to enable it.

---
 drivers/soc/qcom/llcc-qcom.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
drivers/soc/qcom/llcc-qcom.c +15 -0
index 8d4953800fa9..e845d3919ef3 100644
@@ -51,10 +51,12 @@
 #define LLCC_TRP_SCID_DIS_CAP_ALLOC   0x21f00
 #define LLCC_TRP_PCB_ACT              0x21f04
 #define LLCC_TRP_WRSC_EN              0x21f20
+#define LLCC_TRP_WRSC_CACHEABLE_EN    0x21f2c
 
 #define BANK_OFFSET_STRIDE	      0x80000
 
 #define LLCC_VERSION_2_0_0_0          0x02000000
+#define LLCC_VERSION_2_1_0_0          0x02010000
 
 /**
  * struct llcc_slice_config - Data associated with the llcc slice
@@ -80,6 +82,8 @@
  *               collapse.
  * @activate_on_init: Activate the slice immediately after it is programmed
  * @write_scid_en: Bit enables write cache support for a given scid.
+ * @write_scid_cacheable_en: Enables write cache cacheable support for a
+ *			     given scid (not supported on v2 or older hardware).
  */
 struct llcc_slice_config {
 	u32 usecase_id;
@@ -95,6 +99,7 @@ struct llcc_slice_config {
 	bool retain_on_pc;
 	bool activate_on_init;
 	bool write_scid_en;
+	bool write_scid_cacheable_en;
 };
 
 struct qcom_llcc_config {
@@ -515,6 +520,16 @@ static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config,
 			return ret;
 	}
 
+	if (drv_data->version >= LLCC_VERSION_2_1_0_0) {
+		u32 wr_cache_en;
+
+		wr_cache_en = config->write_scid_cacheable_en << config->slice_id;
+		ret = regmap_update_bits(drv_data->bcast_regmap, LLCC_TRP_WRSC_CACHEABLE_EN,
+					 BIT(config->slice_id), wr_cache_en);
+		if (ret)
+			return ret;
+	}
+
 	if (config->activate_on_init) {
 		desc.slice_id = config->slice_id;
 		ret = llcc_slice_activate(&desc);
Signature · 1 line
2.33.1
#4 lore raw

PATCH v2 4/9 soc: qcom: llcc: Add missing llcc configuration data

In reply to Sai Prakash Ranjan

Add missing llcc configuration data for few chipsets which were not added during initial post.

---
 drivers/soc/qcom/llcc-qcom.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/soc/qcom/llcc-qcom.c +4 -0
index e845d3919ef3..a791213a99e0 100644
@@ -244,21 +244,25 @@ static const struct qcom_llcc_config sdm845_cfg = {
 static const struct qcom_llcc_config sm6350_cfg = {
 	.sct_data	= sm6350_data,
 	.size		= ARRAY_SIZE(sm6350_data),
+	.need_llcc_cfg	= true,
 };
 
 static const struct qcom_llcc_config sm8150_cfg = {
 	.sct_data       = sm8150_data,
 	.size           = ARRAY_SIZE(sm8150_data),
+	.need_llcc_cfg	= true,
 };
 
 static const struct qcom_llcc_config sm8250_cfg = {
 	.sct_data       = sm8250_data,
 	.size           = ARRAY_SIZE(sm8250_data),
+	.need_llcc_cfg	= true,
 };
 
 static const struct qcom_llcc_config sm8350_cfg = {
 	.sct_data       = sm8350_data,
 	.size           = ARRAY_SIZE(sm8350_data),
+	.need_llcc_cfg	= true,
 };
 
 static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
Signature · 1 line
2.33.1
#5 lore raw

PATCH v2 5/9 soc: qcom: llcc: Update register offsets for newer LLCC HW

In reply to Sai Prakash Ranjan

Newer LLCC HW have different register offsets for several registers, currently of which LLCC hardware info and status are used to identify the LLCC version information and other data. So use separate table to keep track of these register offsets which vary by different LLCC HW versions and eases any future addition in variations of register offsets for newer hardware.

---
 drivers/soc/qcom/llcc-qcom.c | 36 +++++++++++++++++++++++++++++-------
 1 file changed, 29 insertions(+), 7 deletions(-)
drivers/soc/qcom/llcc-qcom.c +29 -7
index a791213a99e0..ea93740cc671 100644
@@ -36,9 +36,6 @@
 
 #define CACHE_LINE_SIZE_SHIFT         6
 
-#define LLCC_COMMON_HW_INFO           0x00030000
-
-#define LLCC_COMMON_STATUS0           0x0003000c
 #define LLCC_LB_CNT_MASK              GENMASK(31, 28)
 #define LLCC_LB_CNT_SHIFT             28
 
@@ -106,6 +103,12 @@ struct qcom_llcc_config {
 	const struct llcc_slice_config *sct_data;
 	int size;
 	bool need_llcc_cfg;
+	const u32 *reg_offset;
+};
+
+enum llcc_reg_offset {
+	LLCC_COMMON_HW_INFO,
+	LLCC_COMMON_STATUS0,
 };
 
 static const struct llcc_slice_config sc7180_data[] =  {
@@ -223,46 +226,63 @@ static const struct llcc_slice_config sm8350_data[] =  {
 	{ LLCC_CPUHWT,   5, 512,   1, 1, 0xfff, 0x0, 0, 0, 0, 0, 0, 1 },
 };
 
+static const u32 llcc_v1_2_reg_offset[] = {
+	[LLCC_COMMON_HW_INFO]	= 0x00030000,
+	[LLCC_COMMON_STATUS0]	= 0x0003000c,
+};
+
+static const u32 llcc_v21_reg_offset[] = {
+	[LLCC_COMMON_HW_INFO]	= 0x00034000,
+	[LLCC_COMMON_STATUS0]	= 0x0003400c,
+};
+
 static const struct qcom_llcc_config sc7180_cfg = {
 	.sct_data	= sc7180_data,
 	.size		= ARRAY_SIZE(sc7180_data),
 	.need_llcc_cfg	= true,
+	.reg_offset	= llcc_v1_2_reg_offset,
 };
 
 static const struct qcom_llcc_config sc7280_cfg = {
 	.sct_data	= sc7280_data,
 	.size		= ARRAY_SIZE(sc7280_data),
 	.need_llcc_cfg	= true,
+	.reg_offset	= llcc_v1_2_reg_offset,
 };
 
 static const struct qcom_llcc_config sdm845_cfg = {
 	.sct_data	= sdm845_data,
 	.size		= ARRAY_SIZE(sdm845_data),
 	.need_llcc_cfg	= false,
+	.reg_offset	= llcc_v1_2_reg_offset,
 };
 
 static const struct qcom_llcc_config sm6350_cfg = {
 	.sct_data	= sm6350_data,
 	.size		= ARRAY_SIZE(sm6350_data),
 	.need_llcc_cfg	= true,
+	.reg_offset	= llcc_v1_2_reg_offset,
 };
 
 static const struct qcom_llcc_config sm8150_cfg = {
 	.sct_data       = sm8150_data,
 	.size           = ARRAY_SIZE(sm8150_data),
 	.need_llcc_cfg	= true,
+	.reg_offset	= llcc_v1_2_reg_offset,
 };
 
 static const struct qcom_llcc_config sm8250_cfg = {
 	.sct_data       = sm8250_data,
 	.size           = ARRAY_SIZE(sm8250_data),
 	.need_llcc_cfg	= true,
+	.reg_offset	= llcc_v1_2_reg_offset,
 };
 
 static const struct qcom_llcc_config sm8350_cfg = {
 	.sct_data       = sm8350_data,
 	.size           = ARRAY_SIZE(sm8350_data),
 	.need_llcc_cfg	= true,
+	.reg_offset	= llcc_v1_2_reg_offset,
 };
 
 static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
@@ -618,15 +638,18 @@ static int qcom_llcc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	cfg = of_device_get_match_data(&pdev->dev);
+
 	/* Extract version of the IP */
-	ret = regmap_read(drv_data->bcast_regmap, LLCC_COMMON_HW_INFO, &version);
+	ret = regmap_read(drv_data->bcast_regmap, cfg->reg_offset[LLCC_COMMON_HW_INFO],
+			  &version);
 	if (ret)
 		goto err;
 
 	drv_data->version = version;
 
-	ret = regmap_read(drv_data->regmap, LLCC_COMMON_STATUS0,
-						&num_banks);
+	ret = regmap_read(drv_data->regmap, cfg->reg_offset[LLCC_COMMON_STATUS0],
+			  &num_banks);
 	if (ret)
 		goto err;
 
@@ -634,7 +657,6 @@ static int qcom_llcc_probe(struct platform_device *pdev)
 	num_banks >>= LLCC_LB_CNT_SHIFT;
 	drv_data->num_banks = num_banks;
 
-	cfg = of_device_get_match_data(&pdev->dev);
 	llcc_cfg = cfg->sct_data;
 	sz = cfg->size;
 
Signature · 1 line
2.33.1
#6 lore raw

PATCH v2 6/9 soc: qcom: llcc: Add configuration data for SM8450 SoC

In reply to Sai Prakash Ranjan

Add LLCC configuration data for SM8450 SoC.

---
 drivers/soc/qcom/llcc-qcom.c       | 34 ++++++++++++++++++++++++++++++
 include/linux/soc/qcom/llcc-qcom.h |  5 +++++
 2 files changed, 39 insertions(+)
drivers/soc/qcom/llcc-qcom.c +34 -0
index ea93740cc671..53816e66d877 100644
@@ -226,6 +226,32 @@ static const struct llcc_slice_config sm8350_data[] =  {
 	{ LLCC_CPUHWT,   5, 512,   1, 1, 0xfff, 0x0, 0, 0, 0, 0, 0, 1 },
 };
 
+static const struct llcc_slice_config sm8450_data[] =  {
+	{LLCC_CPUSS,     1, 3072, 1, 0, 0xFFFF, 0x0,   0, 0, 0, 1, 1, 0, 0 },
+	{LLCC_VIDSC0,    2,  512, 3, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_AUDIO,     6, 1024, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 0, 0, 0, 0 },
+	{LLCC_MDMHPGRW,  7, 1024, 3, 0, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_MODHW,     9, 1024, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_CMPT,     10, 4096, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_GPUHTW,   11,  512, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_GPU,      12, 2048, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 1, 0 },
+	{LLCC_MMUHWT,   13,  768, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 0, 1, 0, 0 },
+	{LLCC_DISP,     16, 4096, 2, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_MDMPNG,   21, 1024, 1, 1, 0xF000, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_AUDHW,    22, 1024, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 0, 0, 0, 0 },
+	{LLCC_CVP,      28,  256, 3, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_MODPE,    29,   64, 1, 1, 0xF000, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_APTCM,    30, 1024, 3, 1, 0x0,    0xF0,  1, 0, 0, 1, 0, 0, 0 },
+	{LLCC_WRCACHE,  31,  512, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 0, 1, 0, 0 },
+	{LLCC_CVPFW,    17,  512, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_CPUSS1,    3, 1024, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_CAMEXP0,   4,  256, 3, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_CPUMTE,   23,  256, 1, 1, 0x0FFF, 0x0,   0, 0, 0, 0, 1, 0, 0 },
+	{LLCC_CPUHWT,    5,  512, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 1, 0, 0 },
+	{LLCC_CAMEXP1,  27,  256, 3, 1, 0xFFFF, 0x0,   0, 0, 0, 1, 0, 0, 0 },
+	{LLCC_AENPU,     8, 2048, 1, 1, 0xFFFF, 0x0,   0, 0, 0, 0, 0, 0, 0 },
+};
+
 static const u32 llcc_v1_2_reg_offset[] = {
 	[LLCC_COMMON_HW_INFO]	= 0x00030000,
 	[LLCC_COMMON_STATUS0]	= 0x0003000c,
@@ -285,6 +311,13 @@ static const struct qcom_llcc_config sm8350_cfg = {
 	.reg_offset	= llcc_v1_2_reg_offset,
 };
 
+static const struct qcom_llcc_config sm8450_cfg = {
+	.sct_data       = sm8450_data,
+	.size           = ARRAY_SIZE(sm8450_data),
+	.need_llcc_cfg	= true,
+	.reg_offset	= llcc_v21_reg_offset,
+};
+
 static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
 
 /**
@@ -714,6 +747,7 @@ static const struct of_device_id qcom_llcc_of_match[] = {
 	{ .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfg },
 	{ .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfg },
 	{ .compatible = "qcom,sm8350-llcc", .data = &sm8350_cfg },
+	{ .compatible = "qcom,sm8450-llcc", .data = &sm8450_cfg },
 	{ }
 };
 
include/linux/soc/qcom/llcc-qcom.h +5 -0
index beecf00b707d..0bc21ee58fac 100644
@@ -35,7 +35,12 @@
 #define LLCC_WRCACHE     31
 #define LLCC_CVPFW       32
 #define LLCC_CPUSS1      33
+#define LLCC_CAMEXP0     34
+#define LLCC_CPUMTE      35
 #define LLCC_CPUHWT      36
+#define LLCC_MDMCLAD2    37
+#define LLCC_CAMEXP1     38
+#define LLCC_AENPU       45
 
 /**
  * struct llcc_slice_desc - Cache slice descriptor
Signature · 1 line
2.33.1
#7 lore raw

PATCH v2 7/9 dt-bindings: arm: msm: Add LLCC compatible for SM8350

In reply to Sai Prakash Ranjan

Add LLCC compatible for SM8350 SoC.

---
 Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +1 -0
index 03882aac8d2d..c1eded3a3257 100644
@@ -27,6 +27,7 @@ properties:
       - qcom,sm6350-llcc
       - qcom,sm8150-llcc
       - qcom,sm8250-llcc
+      - qcom,sm8350-llcc
 
   reg:
     items:
Signature · 1 line
2.33.1
#9 lore raw

PATCH v2 8/9 dt-bindings: arm: msm: Add LLCC compatible for SM8450

In reply to Sai Prakash Ranjan

Add LLCC compatible for SM8450 SoC.

---
 Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +1 -0
index c1eded3a3257..30fcbe2ad8a3 100644
@@ -28,6 +28,7 @@ properties:
       - qcom,sm8150-llcc
       - qcom,sm8250-llcc
       - qcom,sm8350-llcc
+      - qcom,sm8450-llcc
 
   reg:
     items:
Signature · 1 line
2.33.1
#11 lore raw

PATCH v2 9/9 arm64: dts: qcom: sm8450: Add LLCC/system-cache-controller node

In reply to Sai Prakash Ranjan

Add a DT node for Last level cache (aka. system cache) controller which provides control over the last level cache present on SM8450 SoC.

---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/qcom/sm8450.dtsi +7 -0
index 10c25ad2d0c7..5a3d050b94f7 100644
@@ -1102,6 +1102,13 @@ usb_1_dwc3: usb@a600000 {
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
+
+		system-cache-controller@19200000 {
+			compatible = "qcom,sm8450-llcc";
+			reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>;
+			reg-names = "llcc_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	timer {
Signature · 1 line
2.33.1
Tested-by on the v2 series
#12 lore raw
In reply to Sai Prakash Ranjan
Quoted 4 lines · Sai Prakash Ranjan

This patch series adds support for LLCC on SM8450 SoC. It mainly consists of LLCC driver changes to incorporate newer LLCC HW found on SM8450 SoC and the corresponding DT bits to enable LLCC. Based on qcom/for-next branch.

I have tested this on SM8450 QRD and MTP

Signature · 1 line
~Vinod
#13 lore raw
Quoted 9 lines · Vinod Koul
Quoted 4 lines · Sai Prakash Ranjan

This patch series adds support for LLCC on SM8450 SoC. It mainly consists of LLCC driver changes to incorporate newer LLCC HW found on SM8450 SoC and the corresponding DT bits to enable LLCC. Based on qcom/for-next branch.

I have tested this on SM8450 QRD and MTP

Thanks Vinod.

-Sai

#14 lore raw
In reply to Sai Prakash Ranjan
This series was applied to qcom/linux.git (for-next) by Bjorn Andersson <[email protected]>:

Hello:

This series was applied to qcom/linux.git (for-next) by Bjorn Andersson <[email protected]>:

Quoted 9 lines · On Fri, 28 Jan 2022 13:17:07 +0530 you wrote:

This patch series adds support for LLCC on SM8450 SoC. It mainly consists of LLCC driver changes to incorporate newer LLCC HW found on SM8450 SoC and the corresponding DT bits to enable LLCC. Based on qcom/for-next branch.

Changes in v2:
* Fix version assignment to drv_data.

[...]

Here is the summary with links:
- [PATCHv2,1/9] soc: qcom: llcc: Add support for 16 ways of allocation

    https://git.kernel.org/qcom/c/06b24ab36440
  - [PATCHv2,2/9] soc: qcom: llcc: Update the logic for version info extraction
    https://git.kernel.org/qcom/c/8008e7902f28
  - [PATCHv2,3/9] soc: qcom: llcc: Add write-cache cacheable support
    https://git.kernel.org/qcom/c/2b8175a1f108
  - [PATCHv2,4/9] soc: qcom: llcc: Add missing llcc configuration data
    https://git.kernel.org/qcom/c/bc88a42075cd
  - [PATCHv2,5/9] soc: qcom: llcc: Update register offsets for newer LLCC HW
    https://git.kernel.org/qcom/c/424ad93c23e2
  - [PATCHv2,6/9] soc: qcom: llcc: Add configuration data for SM8450 SoC
    https://git.kernel.org/qcom/c/a6e9d7ef252c
  - [PATCHv2,7/9] dt-bindings: arm: msm: Add LLCC compatible for SM8350
    https://git.kernel.org/qcom/c/c4bfcb73b609
  - [PATCHv2,8/9] dt-bindings: arm: msm: Add LLCC compatible for SM8450
    https://git.kernel.org/qcom/c/c9413e3e1e59
  - [PATCHv2,9/9] arm64: dts: qcom: sm8450: Add LLCC/system-cache-controller node
    https://git.kernel.org/qcom/c/1dc3e50eb680

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html