arm64: dts: ls1028a-qds: define mdio slots for networking options
Subsystems (2)
PATCH 1/1 arm64: dts: ls1028a-qds: define mdio slots for networking options
The ls1028a QDS board support different pluggable PHY cards. Define the nodes for these slots to be updated at boot time with overlay according to board setup.
--- .../boot/dts/freescale/fsl-ls1028a-qds.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +24 -0
@@ -107,6 +107,30 @@ qds_phy1: ethernet-phy@5 { reg = <5>; }; }; + + mdio_slot1: mdio@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + mdio_slot2: mdio@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + mdio_slot3: mdio@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + mdio_slot4: mdio@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; };
Signature · 1 line
2.25.1
Quoted 6 lines · Li Yang
The ls1028a QDS board support different pluggable PHY cards. Define the nodes for these slots to be updated at boot time with overlay according to board setup.
Signed-off-by Alex Marginean <[email protected]>Signed-off-by Li Yang <[email protected]>
Andrew
Quoted 7 lines · Li Yang
The ls1028a QDS board support different pluggable PHY cards. Define the nodes for these slots to be updated at boot time with overlay according to board setup.
Signed-off-by Alex Marginean <[email protected]>Signed-off-by Li Yang <[email protected]>---
This fixes:
=> tftp $fdt_addr_r fsl-ls1028a-qds.dtb && tftp $fdt_ovr_addr_r fsl-ls1028a-qds-85bb.dtb => fdt addr $fdt_addr_r && fdt resize 0x100000 && fdt apply $fdt_ovr_addr_r failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND
Quoted 41 lines
.../boot/dts/freescale/fsl-ls1028a-qds.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +24
-0@@ -107,6 +107,30 @@ qds_phy1: ethernet-phy@5 { reg = <5>; }; }; + + mdio_slot1: mdio@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + mdio_slot2: mdio@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + mdio_slot3: mdio@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + mdio_slot4: mdio@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; };Signature · 1 line
2.25.1
Shawn Guo
AppliedQuoted 6 lines · Li Yang
The ls1028a QDS board support different pluggable PHY cards. Define the nodes for these slots to be updated at boot time with overlay according to board setup.
Signed-off-by Alex Marginean <[email protected]>Signed-off-by Li Yang <[email protected]>
Applied, thanks!