Skip to contentSkip to conversation

arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'

PATCH Applied Dongjin Kim 2 participants 3 messages Jan 27, 2022 – Feb 4, 2022

Subsystems (2)
Device tree bindings Arm/Amlogic Meson SoC support
lore
Share & tools
lore

Dongjin Kim

author
#0 lore raw

PATCH 1/1 arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'

Typo in audio amplifier node, dioo2133 -> dio2133

Signed-off-by Dongjin Kim <[email protected]>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +2 -2
index aa5898a58b89..120f2551a28b 100644
@@ -22,7 +22,7 @@ aliases {
 		spi0 = &spicc0;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;

@@ -222,7 +222,7 @@ sound {
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
Signature · 1 line
2.32.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 2 lines · Dongjin Kim

Typo in audio amplifier node, dioo2133 -> dio2133

Fixes ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Fixes 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support")
Quoted 20 lines
Signed-off-by Dongjin Kim <[email protected]>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +1 -1
index aa5898a58b89..120f2551a28b 100644
@@ -22,7 +22,7 @@ aliases {
 		spi0 = &spicc0;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;

arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi sound { · line 228

Quoted 8 lines
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +1 -1
@@ -222,7 +222,7 @@ sound {
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
Reviewed-by Neil Armstrong <[email protected]>