add i2c support for mt8186
Subsystems (4)
v2 cover add i2c support for mt8186
V1:
Add i2c compatible for MT8186. Compare to MT8192 i2c controller, MT8186 doesn't need handshake signal with apdma.
Kewei Xu (2):
dt-bindings: i2c: update bindings for MT8186 SoC
i2c: mediatek: Add i2c compatible for Mediatek MT8186
.../devicetree/bindings/i2c/i2c-mt65xx.txt | 1 + drivers/i2c/busses/i2c-mt65xx.c | 14 ++++++++++++++ 2 files changed, 15 insertions(+)
--
2.18.0
PATCH v2 1/2 dt-bindings: i2c: update bindings for MT8186 SoC
Add a DT binding documentation for the MT8186 soc.
--- Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt +1 -0
@@ -14,6 +14,7 @@ Required properties: "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 "mediatek,mt8173-i2c": for MediaTek MT8173 "mediatek,mt8183-i2c": for MediaTek MT8183 + "mediatek,mt8186-i2c": for MediaTek MT8186 "mediatek,mt8192-i2c": for MediaTek MT8192 "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195 "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
Signature · 1 line
2.25.1
Re: [v2 1/2] dt-bindings: i2c: update bindings for MT8186 SoC
Quoted 3 lines · Kewei Xu
Add a DT binding documentation for the MT8186 soc.
Signed-off-by Kewei Xu <[email protected]>
Quoted 12 lines
--- Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt +0
-0@@ -14,6 +14,7 @@ Required properties: "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTekMT7629
Quoted 8 lines
"mediatek,mt8173-i2c": for MediaTek MT8173 "mediatek,mt8183-i2c": for MediaTek MT8183 + "mediatek,mt8186-i2c": for MediaTek MT8186 "mediatek,mt8192-i2c": for MediaTek MT8192 "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195 "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTekMT8516
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Wolfram Sang
AppliedRe: [v2 1/2] dt-bindings: i2c: update bindings for MT8186 SoC
In reply to Kewei XuQuoted 3 lines · Kewei Xu
Add a DT binding documentation for the MT8186 soc.
Signed-off-by Kewei Xu <[email protected]>
Applied to for-next, thanks! But you forgot to add the ack from Rob which he gave when you sent v1.
Re: [v2 1/2] dt-bindings: i2c: update bindings for MT8186 SoC
Quoted 8 lines · Wolfram Sang
Quoted 3 lines · Kewei Xu
Add a DT binding documentation for the MT8186 soc.
Signed-off-by Kewei Xu <[email protected]>Applied to for-next, thanks! But you forgot to add the ack from Rob which he gave when you sent v1.
Hi,
I'm sorry for my mistake and thank you very much for your reminder. I will pay attention to this problem next time.
Thanks
Kewei.
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
PATCH v2 2/2 i2c: mediatek: Add i2c compatible for Mediatek MT8186
In reply to Kewei XuAdd i2c compatible for MT8186. Compare to MT8192 i2c controller, MT8186 doesn't need handshake signal witch apdma.
--- drivers/i2c/busses/i2c-mt65xx.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/i2c/busses/i2c-mt65xx.c +14 -0
@@ -397,6 +397,19 @@ static const struct mtk_i2c_compatible mt8183_compat = { .max_dma_support = 33, }; +static const struct mtk_i2c_compatible mt8186_compat = { + .regs = mt_i2c_regs_v2, + .pmic_i2c =0 , + .dcm =0 , + .auto_restart =1 , + .aux_len_reg =1 , + .timing_adjust =1 , + .dma_sync =0 , + .ltiming_adjust =1 , + .apdma_sync =0 , + .max_dma_support =36 , +}; +static const struct mtk_i2c_compatible mt8192_compat = { .quirks = &mt8183_i2c_quirks, .regs = mt_i2c_regs_v2,
@@ -418,6 +431,7 @@ static const struct of_device_id mtk_i2c_of_match[] = { { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat }, { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat }, { .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat }, + { .compatible = "mediatek,mt8186-i2c", .data = &mt8186_compat }, { .compatible = "mediatek,mt8192-i2c", .data = &mt8192_compat }, {} };
Signature · 7 lines
2.25.1 _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Re: [v2 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8186
Quoted 4 lines · Kewei Xu
Add i2c compatible for MT8186. Compare to MT8192 i2c controller, MT8186 doesn't need handshake signal witch apdma.
Signed-off-by Kewei Xu <[email protected]>
Quoted 44 lines
--- drivers/i2c/busses/i2c-mt65xx.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)drivers/i2c/busses/i2c-mt65xx.c +13
-0@@ -397,6 +397,19 @@ static const struct mtk_i2c_compatible mt8183_compat = { .max_dma_support = 33, }; +static const struct mtk_i2c_compatible mt8186_compat = { + .regs = mt_i2c_regs_v2, + .pmic_i2c =0 , + .dcm =0 , + .auto_restart =1 , + .aux_len_reg =1 , + .timing_adjust =1 , + .dma_sync =0 , + .ltiming_adjust =1 , + .apdma_sync =0 , + .max_dma_support =36 , +}; +static const struct mtk_i2c_compatible mt8192_compat = { .quirks = &mt8183_i2c_quirks,drivers/i2c/busses/i2c-mt65xx.c +0
-0.regs = mt_i2c_regs_v2,@@ -418,6 +431,7 @@ static const struct of_device_id mtk_i2c_of_match[] = { { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat }, { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat }, { .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat},
drivers/i2c/busses/i2c-mt65xx.c +1
-0+ { .compatible = "mediatek,mt8186-i2c", .data = &mt8186_compat},
{ .compatible = "mediatek,mt8192-i2c", .data =&mt8192_compat
},
{}
};
Wolfram Sang
AppliedRe: [v2 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8186
In reply to Kewei XuQuoted 4 lines · Kewei Xu
Add i2c compatible for MT8186. Compare to MT8192 i2c controller, MT8186 doesn't need handshake signal witch apdma.
Signed-off-by Kewei Xu <[email protected]>
Applied to for-next, thanks!
Quoted 3 lines · Kewei Xu
V1:
Add i2c compatible for MT8186. Compare to MT8192 i2c controller, MT8186 doesn't need handshake signal with apdma.
A description of what has changed in v2 would have been helpful. Please add it next time.