arm64: dts: qcom: add IPA qcom,qmp property
Subsystems (6)
PATCH 1/1 arm64: dts: qcom: add IPA qcom,qmp property
At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly.
---
Dave, Jakub, please let Bjorn take this through the Qualcomm tree.
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 ++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 ++ arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 ++ 3 files changed, 6 insertions(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +2 -0
@@ -1459,6 +1459,8 @@ ipa: ipa@1e40000 { "imem", "config"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid",
arch/arm64/boot/dts/qcom/sc7280.dtsi +2 -0
@@ -1714,6 +1714,8 @@ ipa: ipa@1e40000 { interconnect-names = "memory", "config"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid",
arch/arm64/boot/dts/qcom/sm8350.dtsi +2 -0
@@ -1425,6 +1425,8 @@ ipa: ipa@1e40000 { interconnect-names = "memory", "config"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&ipa_smp2p_out 0>, <&ipa_smp2p_out 1>; qcom,smem-state-names = "ipa-clock-enabled-valid",
Signature · 1 line
2.32.0
Jakub Kicinski
maintainerQuoted 8 lines · On Tue, 1 Feb 2022 08:07:23 -0600 Alex Elder wrote:
At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly.
Signed-off-by Alex Elder <[email protected]>---
Dave, Jakub, please let Bjorn take this through the Qualcomm tree.
I don't know much about DT but the patch defining the property is targeting net - will it not cause validation errors? Or Bjorn knows to wait for the fixes to propagate? Or it doesn't matter? :)
Quoted 5 lines · Jakub Kicinski
Quoted 4 lines · On Tue, 1 Feb 2022 08:07:23 -0600 Alex Elder wrote:
At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly.
Quoted 8 lines
Quoted 4 lines
Signed-off-by Alex Elder <[email protected]>---
Dave, Jakub, please let Bjorn take this through the Qualcomm tree.
I don't know much about DT but the patch defining the property is targeting net - will it not cause validation errors? Or Bjorn knows to wait for the fixes to propagate? Or it doesn't matter? :)
It might matter sometimes, but in this case it does not.
If the DT property is present but never referenced by the code, it doesn't matter.
The code in this patch looks up the DT property, and its behavior is affected by whether the property is there or not. If it's not there, it's treated as an error that can be safely ignored.
In the case this fix is actually needed, we'll need both the code present and DT property defined. If the code is there but not the property, it's OK, but the bug won't be fixed quite yet.
-Alex
Quoted 26 lines · Alex Elder
Quoted 5 lines · Jakub Kicinski
Quoted 4 lines · On Tue, 1 Feb 2022 08:07:23 -0600 Alex Elder wrote:
At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly.
Quoted 8 lines
Quoted 4 lines
Signed-off-by Alex Elder <[email protected]>---
Dave, Jakub, please let Bjorn take this through the Qualcomm tree.
I don't know much about DT but the patch defining the property is targeting net - will it not cause validation errors? Or Bjorn knows to wait for the fixes to propagate? Or it doesn't matter? :)
It might matter sometimes, but in this case it does not.
If the DT property is present but never referenced by the code, it doesn't matter.
The code in this patch looks up the DT property, and its behavior is affected by whether the property is there or not. If it's not there, it's treated as an error that can be safely ignored.
Quoted 4 lines
In the case this fix is actually needed, we'll need both the code present and DT property defined. If the code is there but not the property, it's OK, but the bug won't be fixed quite yet.
If there's only one possible node that qcom,qmp points to, you can just get the node by its compatible (of_find_compatible_node()). Then you don't need a DT update to make things work. Of course, this doesn't work too well if there are 10 possible compatibles without a common fallback compatible.
Rob
Quoted 32 lines · Rob Herring
Quoted 26 lines · Alex Elder
Quoted 5 lines · Jakub Kicinski
Quoted 4 lines · On Tue, 1 Feb 2022 08:07:23 -0600 Alex Elder wrote:
At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly.
Quoted 8 lines
Quoted 4 lines
Signed-off-by Alex Elder <[email protected]>---
Dave, Jakub, please let Bjorn take this through the Qualcomm tree.
I don't know much about DT but the patch defining the property is targeting net - will it not cause validation errors? Or Bjorn knows to wait for the fixes to propagate? Or it doesn't matter? :)
It might matter sometimes, but in this case it does not.
If the DT property is present but never referenced by the code, it doesn't matter.
The code in this patch looks up the DT property, and its behavior is affected by whether the property is there or not. If it's not there, it's treated as an error that can be safely ignored.
Quoted 4 lines
In the case this fix is actually needed, we'll need both the code present and DT property defined. If the code is there but not the property, it's OK, but the bug won't be fixed quite yet.
Quoted 6 lines
If there's only one possible node that qcom,qmp points to, you can just get the node by its compatible (
of_find_compatible_node()). Then you don't need a DT update to make things work. Of course, this doesn't work too well if there are 10 possible compatibles without a common fallback compatible.
In one of the latest platforms there's two QMP instances, so we decided to make the reference explicit to prepare for the introduction of that.
So I intend to pick this patch through the qcom tree.
And we don't need to synchronize it with the net-changes; the two changes can go independently and only when they are both in place will the change take effect and the issue resolved.
Regards,
Bjorn
Bjorn Andersson
AppliedRe: (subset) [PATCH] arm64: dts: qcom: add IPA qcom,qmp property
In reply to Alex ElderQuoted 5 lines · Alex Elder
At least three platforms require the "qcom,qmp" property to be specified, so the IPA driver can request register retention across power collapse. Update DTS files accordingly.
Applied, thanks!
[1/1] arm64: dts: qcom: add IPA qcom,qmp property
commit: 73419e4d2fd1b838fcb1df6a978d67b3ae1c5c01
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>