dt-bindings: leds: Document mmc trigger
Subsystems (2)
PATCH v2 1/1 dt-bindings: leds: Document mmc trigger
The mmc subsystem supports triggering leds on card activity, document the trigger value here. The value is a pattern in this case.
To: [email protected]
---
V2: Rebase on next-20220217
--- .../devicetree/bindings/leds/common.yaml | 39 ++++++++++--------- 1 file changed, 21 insertions(+), 18 deletions(-)
Documentation/devicetree/bindings/leds/common.yaml +21 -18
@@ -79,24 +79,27 @@ properties: the LED. $ref: /schemas/types.yaml#/definitions/string - enum: - # LED will act as a back-light, controlled by the framebuffer system - - backlight - # LED will turn on (but for leds-gpio see "default-state" property in - # Documentation/devicetree/bindings/leds/leds-gpio.yaml) - - default-on - # LED "double" flashes at a load average based rate - - heartbeat - # LED indicates disk activity - - disk-activity - # LED indicates IDE disk activity (deprecated), in new implementations - # use "disk-activity" - - ide-disk - # LED flashes at a fixed, configurable rate - - timer - # LED alters the brightness for the specified duration with one software - # timer (requires "led-pattern" property) - - pattern + oneOf: + - enum: + # LED will act as a back-light, controlled by the framebuffer system + - backlight + # LED will turn on (but for leds-gpio see "default-state" property in + # Documentation/devicetree/bindings/leds/leds-gpio.yaml) + - default-on + # LED "double" flashes at a load average based rate + - heartbeat + # LED indicates disk activity + - disk-activity + # LED indicates IDE disk activity (deprecated), in new implementations + # use "disk-activity" + - ide-disk + # LED flashes at a fixed, configurable rate + - timer + # LED alters the brightness for the specified duration with one software + # timer (requires "led-pattern" property) + - pattern + # LED is triggered by SD/MMC activity + - pattern: "^mmc[0-9]+$" led-pattern: description: |
Signature · 1 line
2.34.1
Rob Herring
maintainerQuoted 11 lines · Marek Vasut
The mmc subsystem supports triggering leds on card activity, document the trigger value here. The value is a pattern in this case.
Signed-off-by Marek Vasut <[email protected]>Cc Jacek Anaszewski <[email protected]>Cc Pavel Machek <[email protected]>Cc Rob Herring <[email protected]>To: [email protected]
---
V2: Rebase on next-20220217
Why? Nobody can apply patches to linux-next. Is there something in next you are dependent on that you didn't tell us about?
Quoted 58 lines
--- .../devicetree/bindings/leds/common.yaml | 39 ++++++++++--------- 1 file changed, 21 insertions(+), 18 deletions(-)Documentation/devicetree/bindings/leds/common.yaml +21
-18@@ -79,24 +79,27 @@ properties: the LED. $ref: /schemas/types.yaml#/definitions/string - enum: - # LED will act as a back-light, controlled by the framebuffer system - - backlight - # LED will turn on (but for leds-gpio see "default-state" property in - # Documentation/devicetree/bindings/leds/leds-gpio.yaml) - - default-on - # LED "double" flashes at a load average based rate - - heartbeat - # LED indicates disk activity - - disk-activity - # LED indicates IDE disk activity (deprecated), in new implementations - # use "disk-activity" - - ide-disk - # LED flashes at a fixed, configurable rate - - timer - # LED alters the brightness for the specified duration with one software - # timer (requires "led-pattern" property) - - pattern + oneOf: + - enum: + # LED will act as a back-light, controlled by the framebuffer system + - backlight + # LED will turn on (but for leds-gpio see "default-state" property in + # Documentation/devicetree/bindings/leds/leds-gpio.yaml) + - default-on + # LED "double" flashes at a load average based rate + - heartbeat + # LED indicates disk activity + - disk-activity + # LED indicates IDE disk activity (deprecated), in new implementations + # use "disk-activity" + - ide-disk + # LED flashes at a fixed, configurable rate + - timer + # LED alters the brightness for the specified duration with one software + # timer (requires "led-pattern" property) + - pattern + # LED is triggered by SD/MMC activity + - pattern: "^mmc[0-9]+$" led-pattern: description: |Signature · 1 line
2.34.1
Quoted 13 lines · Rob Herring
Quoted 11 lines · Marek Vasut
The mmc subsystem supports triggering leds on card activity, document the trigger value here. The value is a pattern in this case.
Signed-off-by Marek Vasut <[email protected]>Cc Jacek Anaszewski <[email protected]>Cc Pavel Machek <[email protected]>Cc Rob Herring <[email protected]>To: [email protected]
---
V2: Rebase on next-20220217
Quoted 2 lines
Why? Nobody can apply patches to linux-next. Is there something in next you are dependent on that you didn't tell us about?
It is just a convenience really, it is where the commits for all the mostly latest development exist in one place, so I can be reasonably sure the maintainer won't have trouble applying the patch on their tree due to some missing patch, and if I work also on driver stuff, I can be sure those drivers are also up-to-date-ish.
No, I don't think this patch specifically depends on anything in latest next.
Quoted 8 lines · Marek Vasut
The mmc subsystem supports triggering leds on card activity, document the trigger value here. The value is a pattern in this case.
Signed-off-by Marek Vasut <[email protected]>Cc Jacek Anaszewski <[email protected]>Cc Pavel Machek <[email protected]>Cc Rob Herring <[email protected]>
Quoted 7 lines
To: [email protected]
---
V2: Rebase on next-20220217--- .../devicetree/bindings/leds/common.yaml | 39 ++++++++++--------- 1 file changed, 21 insertions(+), 18 deletions(-)
Pavel Machek
AppliedQuoted 17 lines · Rob Herring
Quoted 8 lines · Marek Vasut
The mmc subsystem supports triggering leds on card activity, document the trigger value here. The value is a pattern in this case.
Signed-off-by Marek Vasut <[email protected]>Cc Jacek Anaszewski <[email protected]>Cc Pavel Machek <[email protected]>Cc Rob Herring <[email protected]>Quoted 7 lines
To: [email protected]
---
V2: Rebase on next-20220217--- .../devicetree/bindings/leds/common.yaml | 39 ++++++++++--------- 1 file changed, 21 insertions(+), 18 deletions(-)
Quoted 1 line
Reviewed-by Rob Herring <robh@ke
Thanks, applied.
best regards,
Pavel
Signature · 1 line
People of Russia, stop Putin before his war on Ukraine escalates.