Bluetooth: btusb: Add another Realtek 8761BU

This device is sometimes wrapped with a label "EDUP".

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2550 ProdID=8761 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00E04C239987
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

index c30d131da784..5b82fcba7269 100644
@@ -482,6 +482,8 @@ static const struct usb_device_id blacklist_table[] = {
 	/* Additional Realtek 8761BU Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
 	  					     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2550, 0x8761), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Additional Realtek 8821AE Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },

2.33.1

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=618306

---Test result---

Test Summary:

CheckPatch                    PASS      0.80 seconds
GitLint                       PASS      0.41 seconds
SubjectPrefix                 PASS      0.22 seconds
BuildKernel                   PASS      38.76 seconds
BuildKernel32                 PASS      33.68 seconds
Incremental Build with patchesPASS      45.28 seconds
TestRunner: Setup             PASS      590.81 seconds
TestRunner: l2cap-tester      PASS      15.51 seconds
TestRunner: bnep-tester       PASS      6.98 seconds
TestRunner: mgmt-tester       PASS      126.10 seconds
TestRunner: rfcomm-tester     PASS      9.33 seconds
TestRunner: sco-tester        PASS      9.27 seconds
TestRunner: smp-tester        PASS      9.03 seconds
TestRunner: userchan-tester   PASS      7.51 seconds

---
Regards,
Linux Bluetooth

Hi Helmut,

patch has been applied to bluetooth-next tree.

Regards

Marcel