Skip to contentSkip to conversation

net: phy: lan87xx: use genphy_read_master_slave function

PATCH Applied Arun Ramadoss 3 participants 5 messages Mar 7, 2022 – Mar 8, 2022

Subsystems (4)
lore
Share & tools
lore

Arun Ramadoss

author maintainer
#0 lore raw

cover net: phy: lan87xx: use genphy_read_master_slave function

LAN87xx T1 Phy has the same register field as gigabit phy for reading the master slave configuration. But the genphy_read_master_slave function has a check of gigabit phy. So refactored the function in such a way, moved the speed check to the genphy_read_status function. Analyzed the nxp-tja11xx function for refactoring, but the register for configuring master/slave is nxp specific which is not extended phy register.
And analyzed the reusing genphy_setup_master_slave, but for LAN87xx MASTER_ENABLE is always 1 and Preferred state is always 0. So, I didn't try to change it.

Arun Ramadoss (2):
net: phy: exported the genphy_read_master_slave function
net: phy: lan87xx: use genphy_read_master_slave in read_status

 drivers/net/phy/microchip_t1.c | 30 +-----------------------------
 drivers/net/phy/phy_device.c   | 19 +++++++++----------
 include/linux/phy.h            |  1 +
 3 files changed, 11 insertions(+), 39 deletions(-)

base-commit: 57d29a2935c9aab0aaef6264bf6a58aad3859e7c

Signature · 1 line
2.33.0
author maintainer
#1 lore raw

PATCH 1/2 net: phy: exported the genphy_read_master_slave function

genphy_read_master_slave function allows to configure the master/slave for gigabit phys only. In order to use this function irrespective of speed, moved the speed check to the genphy_read_status call.

---
 drivers/net/phy/phy_device.c | 19 +++++++++----------
 include/linux/phy.h          |  1 +
 2 files changed, 10 insertions(+), 10 deletions(-)
drivers/net/phy/phy_device.c +9 -10
index ce0bb5951b81..8406ac739def 100644
@@ -2051,17 +2051,11 @@ static int genphy_setup_master_slave(struct phy_device *phydev)
 				   CTL1000_PREFER_MASTER), ctl);
 }
 
-static int genphy_read_master_slave(struct phy_device *phydev)
+int genphy_read_master_slave(struct phy_device *phydev)
 {
 	int cfg, state;
 	int val;
 
-	if (!phydev->is_gigabit_capable) {
-		phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED;
-		phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED;
-		return 0;
-	}
-
 	phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
 	phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
 
@@ -2102,6 +2096,7 @@ static int genphy_read_master_slave(struct phy_device *phydev)
 
 	return 0;
 }
+EXPORT_SYMBOL(genphy_read_master_slave);
 
 /**
  * genphy_restart_aneg - Enable and Restart Autonegotiation
@@ -2396,14 +2391,18 @@ int genphy_read_status(struct phy_device *phydev)
 	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
 		return 0;
 
+	phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED;
+	phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED;
 	phydev->speed = SPEED_UNKNOWN;
 	phydev->duplex = DUPLEX_UNKNOWN;
 	phydev->pause = 0;
 	phydev->asym_pause = 0;
 
-	err = genphy_read_master_slave(phydev);
-	if (err < 0)
-		return err;
+	if (phydev->is_gigabit_capable) {
+		err = genphy_read_master_slave(phydev);
+		if (err < 0)
+			return err;
+	}
 
 	err = genphy_read_lpa(phydev);
 	if (err < 0)
include/linux/phy.h +1 -0
index cd08cf1a8b0d..20beeaa7443b 100644
@@ -1578,6 +1578,7 @@ int genphy_update_link(struct phy_device *phydev);
 int genphy_read_lpa(struct phy_device *phydev);
 int genphy_read_status_fixed(struct phy_device *phydev);
 int genphy_read_status(struct phy_device *phydev);
+int genphy_read_master_slave(struct phy_device *phydev);
 int genphy_suspend(struct phy_device *phydev);
 int genphy_resume(struct phy_device *phydev);
 int genphy_loopback(struct phy_device *phydev, bool enable);
Signature · 1 line
2.33.0
maintainer Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH net-next 1/2] net: phy: exported the genphy_read_master_slave function

Quoted 5 lines · Arun Ramadoss

genphy_read_master_slave function allows to configure the master/slave for gigabit phys only. In order to use this function irrespective of speed, moved the speed check to the genphy_read_status call.

Andrew

author maintainer
#3 lore raw

PATCH 2/2 net: phy: lan87xx: use genphy_read_master_slave in read_status

In reply to Arun Ramadoss

To read the master slave configuration of the LAN87xx T1 phy, used the generic phy driver genphy_read_master_slave function. Removed the local lan87xx_read_master_slave function.

---
 drivers/net/phy/microchip_t1.c | 30 +-----------------------------
 1 file changed, 1 insertion(+), 29 deletions(-)
drivers/net/phy/microchip_t1.c +1 -29
index 8292f7305805..389df3f4293c 100644
@@ -674,34 +674,6 @@ static int lan87xx_cable_test_get_status(struct phy_device *phydev,
 	return 0;
 }
 
-static int lan87xx_read_master_slave(struct phy_device *phydev)
-{
-	int rc = 0;
-
-	phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
-	phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
-
-	rc = phy_read(phydev, MII_CTRL1000);
-	if (rc < 0)
-		return rc;
-
-	if (rc & CTL1000_AS_MASTER)
-		phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
-	else
-		phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
-
-	rc = phy_read(phydev, MII_STAT1000);
-	if (rc < 0)
-		return rc;
-
-	if (rc & LPA_1000MSRES)
-		phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
-	else
-		phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
-
-	return rc;
-}
-
 static int lan87xx_read_status(struct phy_device *phydev)
 {
 	int rc = 0;
@@ -720,7 +692,7 @@ static int lan87xx_read_status(struct phy_device *phydev)
 	phydev->pause = 0;
 	phydev->asym_pause = 0;
 
-	rc = lan87xx_read_master_slave(phydev);
+	rc = genphy_read_master_slave(phydev);
 	if (rc < 0)
 		return rc;
 
Signature · 1 line
2.33.0
#4 lore raw
In reply to Arun Ramadoss
This series was applied to netdev/net-next.git (master) by Paolo Abeni <[email protected]>:

Hello:

This series was applied to netdev/net-next.git (master) by Paolo Abeni <[email protected]>:

Quoted 11 lines · On Mon, 7 Mar 2022 21:45:13 +0530 you wrote:

LAN87xx T1 Phy has the same register field as gigabit phy for reading the master slave configuration. But the genphy_read_master_slave function has a check of gigabit phy. So refactored the function in such a way, moved the speed check to the genphy_read_status function. Analyzed the nxp-tja11xx function for refactoring, but the register for configuring master/slave is nxp specific which is not extended phy register.
And analyzed the reusing genphy_setup_master_slave, but for LAN87xx MASTER_ENABLE is always 1 and Preferred state is always 0. So, I didn't try to change it.

[...]

Here is the summary with links:
- [net-next,1/2] net: phy: exported the genphy_read_master_slave function

    https://git.kernel.org/netdev/net-next/c/64807c232151
  - [net-next,2/2] net: phy: lan87xx: use genphy_read_master_slave in read_status
    https://git.kernel.org/netdev/net-next/c/f1f3a674261e

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html