dt-bindings: i2c: convert i2c-at91 to json-schema
v2 cover dt-bindings: i2c: convert i2c-at91 to json-schema
This patch series addresses the conversion of the I2C DT binding for Atmel/Microchip SoCs to Device Tree Schema format. The SAMA7G5 compatible has also been added to the I2C DT binding. It also ensures consistency across the SoC files regarding the ordering of the rx and tx strings of the dma-names property of the i2c nodes by changing it in the SoC file of sama7g5.
Changes since v1:
- Moved allOf after required:.
- Removed the pinctrl generic property.
- Replaced the undocumented wm8731 compatible from examples: with the documented atmel,24c02.
- Removed the unnecessary oneOf from the conditional if of allOf. Instead the sama7g5 compatible string is simply added to the enum.
Sergiu Moga (3):
ARM: dts: at91: sama7g5: Swap rx and tx for i2c nodes
dt-bindings: i2c: convert i2c-at91 to json-schema
dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
.../bindings/i2c/atmel,at91sam-i2c.yaml | 146 ++++++++++++++++++ .../devicetree/bindings/i2c/i2c-at91.txt | 82 ---------- arch/arm/boot/dts/sama7g5.dtsi | 18 +-- 3 files changed, 155 insertions(+), 91 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-at91.txt
Signature · 1 line
2.25.1
PATCH v2 1/3 ARM: dts: at91: sama7g5: Swap `rx` and `tx` for `i2c` nodes
Swap rx and tx for the dma-names property of the i2c nodes in order to maintain consistency across Microchip/Atmel SoC files.
--- arch/arm/boot/dts/sama7g5.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
arch/arm/boot/dts/sama7g5.dtsi +9 -9
@@ -601,9 +601,9 @@ i2c1: i2c@600 { #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, - <&dma0 AT91_XDMAC_DT_PERID(8)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; status = "disabled"; }; };
@@ -786,9 +786,9 @@ i2c8: i2c@600 { #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>, - <&dma0 AT91_XDMAC_DT_PERID(22)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; status = "disabled"; }; };
@@ -810,9 +810,9 @@ i2c9: i2c@600 { #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>, - <&dma0 AT91_XDMAC_DT_PERID(24)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; status = "disabled"; }; };
Signature · 1 line
2.25.1
Re: [PATCH v2 1/3] ARM: dts: at91: sama7g5: Swap `rx` and `tx` for `i2c` nodes
Quoted 5 lines · Sergiu Moga
Swap
rxandtxfor thedma-namesproperty of thei2cnodes in order to maintain consistency across Microchip/Atmel SoC files.Signed-off-by Sergiu Moga <[email protected]>Reviewed-by Tudor Ambarus <[email protected]>
As it fixes some of the warning in dt schema check in 5.18-rc1, I queue this patch in "fixes" branch for 5.18.
Thanks, best regards,
Nicolas
Quoted 47 lines
--- arch/arm/boot/dts/sama7g5.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)arch/arm/boot/dts/sama7g5.dtsi +9
-9@@ -601,9 +601,9 @@ i2c1: i2c@600 { #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, - <&dma0 AT91_XDMAC_DT_PERID(8)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; status = "disabled"; }; };@@ -786,9 +786,9 @@ i2c8: i2c@600 { #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>, - <&dma0 AT91_XDMAC_DT_PERID(22)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; status = "disabled"; }; };@@ -810,9 +810,9 @@ i2c9: i2c@600 { #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>, - <&dma0 AT91_XDMAC_DT_PERID(24)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; status = "disabled"; }; };
Signature · 1 line
Nicolas Ferre
PATCH v2 2/3 dt-bindings: i2c: convert i2c-at91 to json-schema
In reply to Sergiu MogaConvert I2C binding for Atmel/Microchip SoCs to Device Tree Schema format.
--- .../bindings/i2c/atmel,at91sam-i2c.yaml | 140 ++++++++++++++++++ .../devicetree/bindings/i2c/i2c-at91.txt | 82 ---------- 2 files changed, 140 insertions(+), 82 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-at91.txt
Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml new file +140 -0
@@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C for Atmel/Microchip platforms + +maintainers: + - Alexandre Belloni <[email protected]> + +properties: + compatible: + enum: + - atmel,at91rm9200-i2c + - atmel,at91sam9261-i2c + - atmel,at91sam9260-i2c + - atmel,at91sam9g20-i2c + - atmel,at91sam9g10-i2c + - atmel,at91sam9x5-i2c + - atmel,sama5d4-i2c + - atmel,sama5d2-i2c + - microchip,sam9x60-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-frequency: + default: 100000 + + dmas: + items: + - description: TX DMA Channel Specifier + - description: RX DMA Channel Specifier + + dma-names: + items: + - const: tx + - const: rx + + atmel,fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum number of data the RX and TX FIFOs can store for + FIFO capable I2C controllers. + + scl-gpios: true + + sda-gpios: true + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + - clocks + +allOf: + - $ref: "i2c-controller.yaml" + - if: + properties: + compatible: + contains: + enum: + - atmel,sama5d4-i2c + - atmel,sama5d2-i2c + - microchip,sam9x60-i2c + then: + properties: + i2c-sda-hold-time-ns: + description: + TWD hold time + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/gpio/gpio.h> + + i2c0: i2c@fff84000 { + compatible = "atmel,at91sam9g20-i2c"; + reg = <0xfff84000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + pagesize = <128>; + }; + }; + + i2c1: i2c@f8034600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0xf8034600 0x100>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(11)>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(12)>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0>; + atmel,fifo-size = <16>; + i2c-sda-hold-time-ns = <336>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + }; + };
Documentation/devicetree/bindings/i2c/i2c-at91.txt deleted +0 -82
82 lines not on this page · raw message
Signature · 1 line
2.25.1
Quoted 11 lines · Sergiu Moga
Convert I2C binding for Atmel/Microchip SoCs to Device Tree Schema format.
Signed-off-by Sergiu Moga <[email protected]>--- .../bindings/i2c/atmel,at91sam-i2c.yaml | 140 ++++++++++++++++++ .../devicetree/bindings/i2c/i2c-at91.txt | 82 ---------- 2 files changed, 140 insertions(+), 82 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-at91.txt
Applied, thanks!
PATCH v2 3/3 dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
In reply to Sergiu MogaAdd compatible strings list for SAMA7G5.
--- .../bindings/i2c/atmel,at91sam-i2c.yaml | 26 ++++++++++++------- 1 file changed, 16 insertions(+), 10 deletions(-)
Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml +16 -10
@@ -12,16 +12,21 @@ maintainers: properties: compatible: - enum: - - atmel,at91rm9200-i2c - - atmel,at91sam9261-i2c - - atmel,at91sam9260-i2c - - atmel,at91sam9g20-i2c - - atmel,at91sam9g10-i2c - - atmel,at91sam9x5-i2c - - atmel,sama5d4-i2c - - atmel,sama5d2-i2c - - microchip,sam9x60-i2c + oneOf: + - items: + - enum: + - atmel,at91rm9200-i2c + - atmel,at91sam9261-i2c + - atmel,at91sam9260-i2c + - atmel,at91sam9g20-i2c + - atmel,at91sam9g10-i2c + - atmel,at91sam9x5-i2c + - atmel,sama5d4-i2c + - atmel,sama5d2-i2c + - microchip,sam9x60-i2c + - items: + - const: microchip,sama7g5-i2c + - const: microchip,sam9x60-i2c reg: maxItems: 1
@@ -79,6 +84,7 @@ allOf: - atmel,sama5d4-i2c - atmel,sama5d2-i2c - microchip,sam9x60-i2c + - microchip,sama7g5-i2c then: properties: i2c-sda-hold-time-ns:
Signature · 1 line
2.25.1
Re: [PATCH v2 3/3] dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
Quoted 7 lines · Sergiu Moga
Add compatible strings list for SAMA7G5.
Signed-off-by Sergiu Moga <[email protected]>--- .../bindings/i2c/atmel,at91sam-i2c.yaml | 26 ++++++++++++------- 1 file changed, 16 insertions(+), 10 deletions(-)
Applied, thanks!