add ethtool SQI support for LAN87xx T1 Phy
Arun Ramadoss
maintainercover add ethtool SQI support for LAN87xx T1 Phy
This patch series add the Signal Quality Index measurement for the LAN87xx and LAN937x T1 phy.
Arun Ramadoss (3):
net: phy: lan87xx: added lan87xx_update_link routine
net: phy: lan937x: added PHY_POLL_CABLE_TEST flag
net: phy: lan87xx: added ethtool SQI support
drivers/net/phy/microchip_t1.c | 146 ++++++++++++++++++++++++++++++++- 1 file changed, 145 insertions(+), 1 deletion(-)
base-commit: 092d992b76ed9d06389af0bc5efd5279d7b1ed9f
Signature · 1 line
2.33.0
Arun Ramadoss
maintainerRFC PATCH 1/3 net: phy: lan87xx: added lan87xx_update_link routine
The LAN87xx phydev->link has been updated via lan87xx_read_status routine. To get only the recent phydev->link status instead of various other status, refactored the code to have separate lan87xx_update_link routine.
--- drivers/net/phy/microchip_t1.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/net/phy/microchip_t1.c +12 -1
@@ -674,7 +674,7 @@ static int lan87xx_cable_test_get_status(struct phy_device *phydev,return 0 ; } -static int lan87xx_read_status (struct phy_device *phydev) +static int lan87xx_update_link (struct phy_device *phydev) {int rc =0 ;
@@ -687,6 +687,17 @@ static int lan87xx_read_status(struct phy_device *phydev)else phydev->link =0 ; +return rc; +} + +static int lan87xx_read_status (struct phy_device *phydev) +{ +int rc =0 ; + + rc =lan87xx_update_link (phydev); +if (rc <0 ) +return rc; + phydev->speed =SPEED_UNKNOWN ; phydev->duplex =DUPLEX_UNKNOWN ; phydev->pause =0 ;
Signature · 1 line
2.33.0
Arun Ramadoss
maintainerRFC PATCH 2/3 net: phy: lan937x: added PHY_POLL_CABLE_TEST flag
In reply to Arun RamadossAdded the phy_poll_cable_test flag for the lan937x phy driver. Tested using command - ethtool --cable-test <dev>
--- drivers/net/phy/microchip_t1.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/phy/microchip_t1.c +1 -0
@@ -759,6 +759,7 @@ static struct phy_driver microchip_t1_phy_driver[] = { { PHY_ID_MATCH_MODEL(PHY_ID_LAN937X), .name = "Microchip LAN937x T1", + .flags = PHY_POLL_CABLE_TEST, .features = PHY_BASIC_T1_FEATURES, .config_init = lan87xx_config_init, .suspend = genphy_suspend,
Signature · 1 line
2.33.0
Arun Ramadoss
maintainerRFC PATCH 3/3 net: phy: lan87xx: added ethtool SQI support
In reply to Arun RamadossThis patch add the support for measuring Signal Quality Index for LAN87xx and LAN937x T1 Phy. To get better accuracy of the SQI, readings are measured and its average is calculated. If the link is down, then routine return immediately.
--- drivers/net/phy/microchip_t1.c | 132 +++++++++++++++++++++++++++++++++ 1 file changed, 132 insertions(+)
drivers/net/phy/microchip_t1.c +132 -0
@@ -9,6 +9,7 @@#include <linux/ethtool.h> #include <linux/ethtool_netlink.h> #include <linux/bitfield.h> +#include <linux/sort.h> #define PHY_ID_LAN87XX 0x0007c150#define PHY_ID_LAN937X 0x0007c180
@@ -68,7 +69,14 @@#define T1_POST_LCK_MUFACT_CFG_REG 0x1C#define T1_TX_RX_FIFO_CFG_REG 0x02#define T1_TX_LPF_FIR_CFG_REG 0x55 +#define T1_COEF_CLK_PWR_DN_CFG 0x04 +#define T1_COEF_RW_CTL_CFG 0x0D#define T1_SQI_CONFIG_REG 0x2E +#define T1_SQI_CONFIG2_REG 0x4A +#define T1_DCQ_MSE_REG 0xC1 +#define T1_MSE_VLD_MSK BIT(9) +#define T1_DCQ_SQI_REG 0xC3 +#define T1_DCQ_SQI_MSK GENMASK(3, 1)#define T1_MDIO_CONTROL2_REG 0x10#define T1_INTERRUPT_SOURCE_REG 0x18#define T1_INTERRUPT2_SOURCE_REG 0x08
@@ -82,6 +90,12 @@#define T1_MODE_STAT_REG 0x11#define T1_LINK_UP_MSK BIT(0) +/* SQI defines */ +#define LAN87XX_MAX_SQI 0x07 +#define LAN87XX_SQI_ENTRY 200 +#define SQI_AVG_MIN 40 +#define SQI_AVG_MAX 160 +#define DRIVER_AUTHOR "Nisar Sayed <[email protected]>"#define DRIVER_DESC "Microchip LAN87XX/LAN937x T1 PHY driver"
@@ -740,6 +754,120 @@ static int lan87xx_config_aneg(struct phy_device *phydev)return rc; } +static int lan87xx_sqi_cmp (const void *a,const void *b) +{ +return *(u16 *)a - *(u16 *)b; +} + +static int lan87xx_get_sqi (struct phy_device *phydev) +{ +u16 sqi_value[LAN87XX_SQI_ENTRY ]; +u32 sqi_avg =0 ; +int rc; +u8 i; + + rc =lan87xx_update_link (phydev); +if (rc <0 ) +return rc; + +if (phydev->link ==0 ) +return sqi_avg; + + rc =access_ereg (phydev,PHYACC_ATTR_MODE_WRITE , +PHYACC_ATTR_BANK_DSP ,T1_COEF_CLK_PWR_DN_CFG ,0x16d6 ); +if (rc <0 ) +return rc; + +/* Enable SQI measurement */ + rc =access_ereg (phydev,PHYACC_ATTR_MODE_WRITE , +PHYACC_ATTR_BANK_DSP ,T1_SQI_CONFIG_REG ,0x9572 ); +if (rc <0 ) +return rc; + +/* Enable SQI Method 5 */ + rc =access_ereg (phydev,PHYACC_ATTR_MODE_WRITE , +PHYACC_ATTR_BANK_DSP ,T1_SQI_CONFIG2_REG ,0x0001 ); +if (rc <0 ) +return rc; + +/* Below effectively throws away first reading +* required delay before reading DSP. +*/ + rc =access_ereg (phydev,PHYACC_ATTR_MODE_WRITE , +PHYACC_ATTR_BANK_DSP ,T1_COEF_RW_CTL_CFG ,0x0301 ); +if (rc <0 ) +return rc; + +usleep_range (40 ,50 ); + +for (i =0 ; i <LAN87XX_SQI_ENTRY ; i++) { + rc =lan87xx_update_link (phydev); +if (rc <0 ) +return rc; + +if (phydev->link ==0 ) +return sqi_avg; + + rc =access_ereg (phydev,PHYACC_ATTR_MODE_WRITE , +PHYACC_ATTR_BANK_DSP , +T1_COEF_RW_CTL_CFG ,0x0301 ); +if (rc <0 ) +return rc; + + rc =access_ereg (phydev,PHYACC_ATTR_MODE_READ , +PHYACC_ATTR_BANK_DSP ,T1_DCQ_SQI_REG ,0x0 ); +if (rc <0 ) +return rc; + + sqi_value[i] =FIELD_GET (T1_DCQ_SQI_MSK , rc); + + rc =access_ereg (phydev,PHYACC_ATTR_MODE_READ , +PHYACC_ATTR_BANK_DSP ,T1_DCQ_MSE_REG ,0x0 ); +if (rc <0 ) +return rc; + +/* Check valid value. 0 - valid, 1 - Invalid +* if invalid, re-read the value after 250ms +*/ +if (FIELD_GET (T1_MSE_VLD_MSK , rc) ==1 ) { + rc =access_ereg (phydev,PHYACC_ATTR_MODE_WRITE , +PHYACC_ATTR_BANK_DSP , +T1_COEF_RW_CTL_CFG ,0x0301 ); +if (rc <0 ) +return rc; + +msleep (250 ); + + rc =access_ereg (phydev,PHYACC_ATTR_MODE_READ , +PHYACC_ATTR_BANK_DSP , +T1_DCQ_SQI_REG ,0x0 ); +if (rc <0 ) +return rc; + + sqi_value[i] =FIELD_GET (T1_DCQ_SQI_MSK , rc); + } + } + +/* Sorting SQI values */ +sort (sqi_value,LAN87XX_SQI_ENTRY ,sizeof (u16), lan87xx_sqi_cmp,NULL ); + +/* Discarding outliers */ +for (i =0 ; i <LAN87XX_SQI_ENTRY ; i++) { +if (i >=SQI_AVG_MIN && i <=SQI_AVG_MAX ) + sqi_avg += sqi_value[i]; + } + +/* Calculating SQI number */ + sqi_avg =DIV_ROUND_UP (sqi_avg, (SQI_AVG_MAX -SQI_AVG_MIN +1 )); + +return sqi_avg; +} + +static int lan87xx_get_sqi_max (struct phy_device *phydev) +{ +return LAN87XX_MAX_SQI ; +} +static struct phy_driver microchip_t1_phy_driver[] = { {PHY_ID_MATCH_MODEL (PHY_ID_LAN87XX ),
@@ -753,6 +881,8 @@ static struct phy_driver microchip_t1_phy_driver[] = { .resume = genphy_resume, .config_aneg = lan87xx_config_aneg, .read_status = lan87xx_read_status, + .get_sqi = lan87xx_get_sqi, + .get_sqi_max = lan87xx_get_sqi_max, .cable_test_start = lan87xx_cable_test_start, .cable_test_get_status = lan87xx_cable_test_get_status, },
@@ -766,6 +896,8 @@ static struct phy_driver microchip_t1_phy_driver[] = { .resume = genphy_resume, .config_aneg = lan87xx_config_aneg, .read_status = lan87xx_read_status, + .get_sqi = lan87xx_get_sqi, + .get_sqi_max = lan87xx_get_sqi_max, .cable_test_start = lan87xx_cable_test_start, .cable_test_get_status = lan87xx_cable_test_get_status, }
Signature · 1 line
2.33.0
Andrew Lunn
maintainerRe: [RFC Patch net-next 3/3] net: phy: lan87xx: added ethtool SQI support
drivers/net/phy/microchip_t1.c static int lan87xx_config_aneg(struct phy_device *phydev) · line 852
Quoted 13 lines
drivers/net/phy/microchip_t1.c +10
-0+#define T1_DCQ_SQI_MSK GENMASK(3, 1) +static int lan87xx_get_sqi (struct phy_device *phydev) +{ +u16 sqi_value[LAN87XX_SQI_ENTRY ]; +for (i =0 ; i <LAN87XX_SQI_ENTRY ; i++) { + + sqi_value[i] =FIELD_GET (T1_DCQ_SQI_MSK , rc); + +/* Sorting SQI values */ +sort (sqi_value,LAN87XX_SQI_ENTRY ,sizeof (u16), lan87xx_sqi_cmp,NULL );
Sort is quite heavyweight. Your SQI values are in the range 0-7 right? So rather than have an array of LAN87XX_SQI_ENTRY entries, why not create a histogram? You then just need to keep 8 uints. There is no need to perform a sort to discard the outliers, simply remove from the outer histogram buckets. And then you can calculate the average.
That should be faster and use less memory.
Andrew
[email protected]
maintainerRe: [RFC Patch net-next 3/3] net: phy: lan87xx: added ethtool SQI support
Hi Andrew,
Thanks for the review.
Quoted 23 lines · Andrew Lunn
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
Quoted 11 lines
drivers/net/phy/microchip_t1.c +10
-0+#define T1_DCQ_SQI_MSK GENMASK(3, 1) +static int lan87xx_get_sqi (struct phy_device *phydev) +{ +u16 sqi_value[LAN87XX_SQI_ENTRY ]; +for (i =0 ; i <LAN87XX_SQI_ENTRY ; i++) { + + sqi_value[i] =FIELD_GET (T1_DCQ_SQI_MSK , rc); + +/* Sorting SQI values */ + sort(sqi_value, LAN87XX_SQI_ENTRY, sizeof(u16),
lan87xx_sqi_cmp, NULL);Sort is quite heavyweight. Your SQI values are in the range 0-7 right?
So rather than have an array ofLAN87XX_SQI_ENTRYentries, why not create a histogram? You then just need to keep 8 uints. There is no need to perform a sort to discard the outliers, simply remove from the
outer histogram buckets. And then you can calculate the average.
Quoted 3 lines
That should be faster and use less memory.
Andrew
I could get the algorithm for replacing array of LAN87XX_SQI_ENTRY(200) to array of 8 (sqi values 0 to 7) and increment the array[sqi_value] for every reading. And calculate the Average = ( 1 * array[1] + 2 * array[2] ... + 7 * array[7])/LAN87XX_SQI_ENTRY. By this way we get the average for 200 entries.
But I couldn't get the algorithm on how to discard the outliers from the buckets. our main aim is to average from array[40] to arrary[160] value. Can you bit elaborate on how to remove the outer histogram buckets.
Arun
Andrew Lunn
maintainerRe: [RFC Patch net-next 3/3] net: phy: lan87xx: added ethtool SQI support
Quoted 32 lines · On Thu, Mar 24, 2022 at 03:48:57PM +0000, [email protected] wrote:
Hi Andrew,
Thanks for the review.
Quoted 23 lines · Andrew Lunn
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
Quoted 11 lines
drivers/net/phy/microchip_t1.c +10
-0+#define T1_DCQ_SQI_MSK GENMASK(3, 1) +static int lan87xx_get_sqi (struct phy_device *phydev) +{ +u16 sqi_value[LAN87XX_SQI_ENTRY ]; +for (i =0 ; i <LAN87XX_SQI_ENTRY ; i++) { + + sqi_value[i] =FIELD_GET (T1_DCQ_SQI_MSK , rc); + +/* Sorting SQI values */ + sort(sqi_value, LAN87XX_SQI_ENTRY, sizeof(u16),
lan87xx_sqi_cmp, NULL);Sort is quite heavyweight. Your SQI values are in the range 0-7 right?
So rather than have an array ofLAN87XX_SQI_ENTRYentries, why not create a histogram? You then just need to keep 8 uints. There is no need to perform a sort to discard the outliers, simply remove from the
outer histogram buckets. And then you can calculate the average.Quoted 3 lines
That should be faster and use less memory.
Andrew
Quoted 9 lines
I could get the algorithm for replacing array of
LAN87XX_SQI_ENTRY(200)to array of 8 (sqi values 0 to 7) and increment the array[sqi_value] for every reading. And calculate the Average = ( 1 * array[1] + 2 * array[2] ... + 7 * array[7])/LAN87XX_SQI_ENTRY. By this way we get the average for 200 entries.
But I couldn't get the algorithm on how to discard the outliers from the buckets. our main aim is to average from array[40] to arrary[160] value. Can you bit elaborate on how to remove the outer histogram buckets.
So your raw results look something like
array[0] = 10
array[1] = 10
array[2] = 25
array[3] = 100
array[4] = 50
array[5] = 1
array[6] = 4
array[7] = 0
To discard the lower outliers, take 40 away from the array[0], array[1], array[2], etc. To discard the upper outliers, take 40 away from array[7], array[6], array[5], etc. So you should end up with:
array[0] = 0
array[1] = 0
array[2] = 5
array[3] = 100
array[4] = 15
array[5] = 0
array[6] = 0
array[7] = 0
and then calculate the average: (2*5 + 3*100 + 4*15) / 120 = 3.
Andrew