Skip to contentSkip to conversation

clk: renesas: r8a7799[05]: Add RPC clocks

PATCH In review Geert Uytterhoeven 3 participants 6 messages Mar 29, 2022 – Apr 11, 2022

Subsystems (3)
lore
Share & tools
lore

Geert Uytterhoeven

author maintainer
#0 lore raw

cover clk: renesas: r8a7799[05]: Add RPC clocks

Hi Mike, Stephen,

This patch series adds support for the various clocks used by the SPI Multi I/O Bus Controller (RPC-IF) on the R-Car E3 and D3 SoCs. It has been tested on the Ebisu-4D and Draak development boards.

I intend to queue this in renesas-clk for v5.19.

Thanks for your comments!

Geert Uytterhoeven (2):
clk: renesas: r8a77990: Add RPC clocks
clk: renesas: r8a77995: Add RPC clocks

 drivers/clk/renesas/r8a77990-cpg-mssr.c | 9 +++++++++
 drivers/clk/renesas/r8a77995-cpg-mssr.c | 9 +++++++++
 drivers/clk/renesas/rcar-gen3-cpg.h     | 3 +++
 3 files changed, 21 insertions(+)
Signature · 12 lines
2.25.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds
author maintainer
#1 lore raw

PATCH 1/2 clk: renesas: r8a77990: Add RPC clocks

Describe the various clocks used by the SPI Multi I/O Bus Controller (RPC-IF) on the R-Car E3 SoC: RPCSRC internal clock, RPC{,D2} clocks derived from it, and RPC-IF module clock.

---
 drivers/clk/renesas/r8a77990-cpg-mssr.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/clk/renesas/r8a77990-cpg-mssr.c +9 -0
index d34d97baab35f3be..a5c95e0021f82e7f 100644
@@ -44,6 +44,7 @@ enum clk_ids {
 	CLK_S2,
 	CLK_S3,
 	CLK_SDSRC,
+	CLK_RPCSRC,
 	CLK_RINT,
 	CLK_OCO,
 
@@ -74,6 +75,8 @@ static const struct cpg_core_clk r8a77990_core_clks[] __initconst = {
 	DEF_FIXED(".s3",       CLK_S3,             CLK_PLL1,       6, 1),
 	DEF_FIXED(".sdsrc",    CLK_SDSRC,          CLK_PLL1,       2, 1),
 
+	DEF_FIXED_RPCSRC_E3(".rpcsrc", CLK_RPCSRC, CLK_PLL0, CLK_PLL1),
+
 	DEF_DIV6_RO(".r",      CLK_RINT,           CLK_EXTAL, CPG_RCKCR, 32),
 
 	DEF_RATE(".oco",       CLK_OCO,            8 * 1000 * 1000),
@@ -107,6 +110,11 @@ static const struct cpg_core_clk r8a77990_core_clks[] __initconst = {
 	DEF_GEN3_SD("sd1",     R8A77990_CLK_SD1,   R8A77990_CLK_SD1H, 0x0078),
 	DEF_GEN3_SD("sd3",     R8A77990_CLK_SD3,   R8A77990_CLK_SD3H, 0x026c),
 
+	DEF_BASE("rpc",		R8A77990_CLK_RPC, CLK_TYPE_GEN3_RPC,
+		 CLK_RPCSRC),
+	DEF_BASE("rpcd2",	R8A77990_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+		 R8A77990_CLK_RPC),
+
 	DEF_FIXED("cl",        R8A77990_CLK_CL,    CLK_PLL1,      48, 1),
 	DEF_FIXED("cr",        R8A77990_CLK_CR,    CLK_PLL1D2,     2, 1),
 	DEF_FIXED("cp",        R8A77990_CLK_CP,    CLK_EXTAL,      2, 1),
@@ -215,6 +223,7 @@ static const struct mssr_mod_clk r8a77990_mod_clks[] __initconst = {
 	DEF_MOD("can-fd",		 914,	R8A77990_CLK_S3D2),
 	DEF_MOD("can-if1",		 915,	R8A77990_CLK_S3D4),
 	DEF_MOD("can-if0",		 916,	R8A77990_CLK_S3D4),
+	DEF_MOD("rpc-if",		 917,	R8A77990_CLK_RPCD2),
 	DEF_MOD("i2c6",			 918,	R8A77990_CLK_S3D2),
 	DEF_MOD("i2c5",			 919,	R8A77990_CLK_S3D2),
 	DEF_MOD("i2c-dvfs",		 926,	R8A77990_CLK_CP),
Signature · 1 line
2.25.1
Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] clk: renesas: r8a77990: Add RPC clocks

Quoted 5 lines · Geert Uytterhoeven

Describe the various clocks used by the SPI Multi I/O Bus Controller (RPC-IF) on the R-Car E3 SoC: RPCSRC internal clock, RPC{,D2} clocks derived from it, and RPC-IF module clock.

One minor question, though:

Quoted 6 lines
drivers/clk/renesas/r8a77990-cpg-mssr.c +2 -0
+	DEF_FIXED_RPCSRC_E3(".rpcsrc", CLK_RPCSRC, CLK_PLL0, CLK_PLL1),
+
 	DEF_DIV6_RO(".r",      CLK_RINT,           CLK_EXTAL, CPG_RCKCR, 32),
 
 	DEF_RATE(".oco",       CLK_OCO,            8 * 1000 * 1000),

drivers/clk/renesas/r8a77990-cpg-mssr.c static const struct cpg_core_clk r8a77990_core_clks[] __initconst = { · line 117

Quoted 8 lines
drivers/clk/renesas/r8a77990-cpg-mssr.c +5 -0
@@ -107,6 +110,11 @@ static const struct cpg_core_clk r8a77990_core_clks[] __initconst = {
 	DEF_GEN3_SD("sd1",     R8A77990_CLK_SD1,   R8A77990_CLK_SD1H, 0x0078),
 	DEF_GEN3_SD("sd3",     R8A77990_CLK_SD3,   R8A77990_CLK_SD3H, 0x026c),
 
+	DEF_BASE("rpc",		R8A77990_CLK_RPC, CLK_TYPE_GEN3_RPC,
+		 CLK_RPCSRC),
+	DEF_BASE("rpcd2",	R8A77990_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+		 R8A77990_CLK_RPC),
+

Any reason the RPC clocks are not grouped together? All other SoCs I checked have that.

#3 lore raw

Re: [PATCH 1/2] clk: renesas: r8a77990: Add RPC clocks

Hi Wolfram,

Quoted 8 lines · Wolfram Sang
Quoted 5 lines · Geert Uytterhoeven

Describe the various clocks used by the SPI Multi I/O Bus Controller (RPC-IF) on the R-Car E3 SoC: RPCSRC internal clock, RPC{,D2} clocks derived from it, and RPC-IF module clock.

Thanks!

Quoted 11 lines

One minor question, though:

Quoted 9 lines
drivers/clk/renesas/r8a77990-cpg-mssr.c +2 -0
+     DEF_FIXED_RPCSRC_E3(".rpcsrc", CLK_RPCSRC, CLK_PLL0, CLK_PLL1),
+
      DEF_DIV6_RO(".r",      CLK_RINT,           CLK_EXTAL, CPG_RCKCR, 32),
 
      DEF_RATE(".oco",       CLK_OCO,            8 * 1000 * 1000),
@@ -107,6 +110,11 @@ static const struct cpg_core_clk r8a77990_core_clks[] __initconst = {
      DEF_GEN3_SD("sd1",     R8A77990_CLK_SD1,   R8A77990_CLK_SD1H, 0x0078),
      DEF_GEN3_SD("sd3",     R8A77990_CLK_SD3,   R8A77990_CLK_SD3H, 0x026c),
 
Quoted 7 lines

drivers/clk/renesas/r8a77990-cpg-mssr.c static const struct cpg_core_clk r8a77990_core_clks[] __initconst = { · line 117

Quoted 5 lines
drivers/clk/renesas/r8a77990-cpg-mssr.c +5 -0
+     DEF_BASE("rpc",         R8A77990_CLK_RPC, CLK_TYPE_GEN3_RPC,
+              CLK_RPCSRC),
+     DEF_BASE("rpcd2",       R8A77990_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+              R8A77990_CLK_RPC),
+

Any reason the RPC clocks are not grouped together? All other SoCs I

Yes :-)
The "rpc" and "rpcd2" clocks are not internal clocks, so they do not belong under "/* Internal Core Clocks */", but under "/* Core Clock Outputs */"...

Quoted 1 line

checked have that.

... Hence soon I'll send out a patch to fix that...

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

author maintainer
#4 lore raw

PATCH 2/2 clk: renesas: r8a77995: Add RPC clocks

In reply to Geert Uytterhoeven

Describe the various clocks used by the SPI Multi I/O Bus Controller (RPC-IF) on the R-Car D3 SoC: RPCSRC internal clock, RPC{,D2} clocks derived from it, and RPC-IF module clock.

The RPCSRC clock divider on R-Car D3 is very similar to the one on R-Car E3, but uses a different pre-divider for the PLL0 parent. Add a new macro to describe it, reusing the existing clock type for R-Car E3.

---
 drivers/clk/renesas/r8a77995-cpg-mssr.c | 9 +++++++++
 drivers/clk/renesas/rcar-gen3-cpg.h     | 3 +++
 2 files changed, 12 insertions(+)
drivers/clk/renesas/r8a77995-cpg-mssr.c +9 -0
index 525eef197fd9a9ab..22e7bf0de9fe1f53 100644
@@ -42,6 +42,7 @@ enum clk_ids {
 	CLK_S2,
 	CLK_S3,
 	CLK_SDSRC,
+	CLK_RPCSRC,
 	CLK_RINT,
 	CLK_OCO,
 
@@ -70,6 +71,8 @@ static const struct cpg_core_clk r8a77995_core_clks[] __initconst = {
 	DEF_FIXED(".s3",       CLK_S3,             CLK_PLL1,       6, 1),
 	DEF_FIXED(".sdsrc",    CLK_SDSRC,          CLK_PLL1,       2, 1),
 
+	DEF_FIXED_RPCSRC_D3(".rpcsrc", CLK_RPCSRC, CLK_PLL0, CLK_PLL1),
+
 	DEF_DIV6_RO(".r",      CLK_RINT,           CLK_EXTAL, CPG_RCKCR, 32),
 
 	DEF_RATE(".oco",       CLK_OCO,            8 * 1000 * 1000),
@@ -106,6 +109,11 @@ static const struct cpg_core_clk r8a77995_core_clks[] __initconst = {
 	DEF_GEN3_SDH("sd0h",   R8A77995_CLK_SD0H, CLK_SDSRC,         0x268),
 	DEF_GEN3_SD("sd0",     R8A77995_CLK_SD0,  R8A77995_CLK_SD0H, 0x268),
 
+	DEF_BASE("rpc",		R8A77995_CLK_RPC, CLK_TYPE_GEN3_RPC,
+		 CLK_RPCSRC),
+	DEF_BASE("rpcd2",	R8A77995_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+		 R8A77995_CLK_RPC),
+
 	DEF_DIV6P1("canfd",    R8A77995_CLK_CANFD, CLK_PLL0D3,    0x244),
 	DEF_DIV6P1("mso",      R8A77995_CLK_MSO,   CLK_PLL1D2,    0x014),
 
@@ -174,6 +182,7 @@ static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = {
 	DEF_MOD("can-fd",		 914,	R8A77995_CLK_S3D2),
 	DEF_MOD("can-if1",		 915,	R8A77995_CLK_S3D4),
 	DEF_MOD("can-if0",		 916,	R8A77995_CLK_S3D4),
+	DEF_MOD("rpc-if",		 917,	R8A77995_CLK_RPCD2),
 	DEF_MOD("i2c3",			 928,	R8A77995_CLK_S3D2),
 	DEF_MOD("i2c2",			 929,	R8A77995_CLK_S3D2),
 	DEF_MOD("i2c1",			 930,	R8A77995_CLK_S3D2),
drivers/clk/renesas/rcar-gen3-cpg.h +3 -0
index 2bc0afadf60413d2..a13df006f531519e 100644
@@ -62,6 +62,9 @@ enum rcar_gen3_clk_types {
 #define DEF_FIXED_RPCSRC_E3(_name, _id, _parent0, _parent1)	\
 	DEF_BASE(_name, _id, CLK_TYPE_GEN3_E3_RPCSRC,	\
 		 (_parent0) << 16 | (_parent1), .div = 8)
+#define DEF_FIXED_RPCSRC_D3(_name, _id, _parent0, _parent1)	\
+	DEF_BASE(_name, _id, CLK_TYPE_GEN3_E3_RPCSRC,	\
+		 (_parent0) << 16 | (_parent1), .div = 5)
 
 struct rcar_gen3_cpg_pll_config {
 	u8 extal_div;
Signature · 1 line
2.25.1
Reviewed-by on v1 2/2
#5 lore raw

Re: [PATCH 2/2] clk: renesas: r8a77995: Add RPC clocks

Quoted 7 lines · Geert Uytterhoeven

Describe the various clocks used by the SPI Multi I/O Bus Controller (RPC-IF) on the R-Car D3 SoC: RPCSRC internal clock, RPC{,D2} clocks derived from it, and RPC-IF module clock.

The RPCSRC clock divider on R-Car D3 is very similar to the one on R-Car E3, but uses a different pre-divider for the PLL0 parent. Add a new macro to describe it, reusing the existing clock type for R-Car E3.

Maybe add a comment in the header file stating the last paragraph, so it is obvious the "E3" there is intended? Other than that: