EDAC/amd64: move platform specific routines to pvt->ops
Subsystems (2)
cover EDAC/amd64: move platform specific routines to pvt->ops
From: Muralidhara M K <[email protected]>
amd64_edac module supports CPU family/models ranging from 10h ~ 19h.
Define family specific ops routines to make the code scale well for various platforms, also ease adding future platforms support.
The code in this patchset is partly reviewed
https://patchwork.kernel.org/project/linux-edac/cover/[email protected]/
1/14 patch in this series is the 4/12th patch in previous v7 series
[4] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
[2 ~ 14]/14 patches are created by splitting the 5/12th patch in
previous v7 series
[5] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
This patchset applies on top of the upstream linux kernel. Each patch was built and tested individually. Tested the functionality on Rome and Milan platforms.
Muralidhara M K (14):
EDAC/amd64: Move struct fam_type variables into struct amd64_pvt EDAC/amd64: Add get_base_mask() into pvt->ops EDAC/amd64: Add prep_chip_selects() into pvt->ops EDAC/amd64: Add determine_memory_type() into pvt->ops EDAC/amd64: Add get_ecc_sym_sz() into pvt->ops EDAC/amd64: Add get_mc_regs() into pvt->ops EDAC/amd64: Add ecc_enabled() into pvt->ops EDAC/amd64: Add determine_edac_cap() into pvt->ops EDAC/amd64: Add determine_edac_ctl_cap() into pvt->ops EDAC/amd64: Add setup_mci_misc_sttr() into pvt->ops EDAC/amd64: Add populate_csrows() into pvt->ops EDAC/amd64: Add dump_misc_regs() into pvt->ops EDAC/amd64: Add get_cs_mode() into pvt->ops EDAC/amd64: Add get_umc_error_info() into pvt->ops
drivers/edac/amd64_edac.c | 793 +++++++++++++++++++------------------- drivers/edac/amd64_edac.h | 55 ++- 2 files changed, 419 insertions(+), 429 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/14 EDAC/amd64: Move struct fam_type variables into struct amd64_pvt
From: Muralidhara M K <[email protected]>
Move struct low_ops routines and members of struct amd64_family_type to struct amd64_pvt.
This change makes code readable and simplifies adding support for various families/models.
---
This patch is the 4/12th patch in series
[v7 4/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 339 ++++++++++++-------------------------- drivers/edac/amd64_edac.h | 42 ++--- 2 files changed, 114 insertions(+), 267 deletions(-)
drivers/edac/amd64_edac.c +104 -235
@@ -13,8 +13,6 @@ module_param(ecc_enable_override, int, 0644);static struct msr __percpu *msrs; -static struct amd64_family_type *fam_type; -/* Per-node stuff */ static struct ecc_settings **ecc_stngs;
@@ -448,7 +446,7 @@ static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct, for (i = 0; i < pvt->csels[dct].m_cnt; i++)#define for_each_umc (i) \ - for (i = 0; i < fam_type->max_mcs; i++) + for (i = 0; i < pvt->max_mcs; i++)/* * @input_addr is an InputAddr associated with the node given by mci. Return the
@@ -2787,166 +2785,6 @@ static void debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl) } } -static struct amd64_family_type family_types[] = { - [K8_CPUS ] = { - .ctl_name ="K8" , - .f1_id =PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP , - .f2_id =PCI_DEVICE_ID_AMD_K8_NB_MEMCTL , - .max_mcs =2 , - .ops = { - .early_channel_count = k8_early_channel_count, - .map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow, - .dbam_to_cs = k8_dbam_to_chip_select, - } - }, - [F10_CPUS ] = { - .ctl_name ="F10h" , - .f1_id =PCI_DEVICE_ID_AMD_10H_NB_MAP , - .f2_id =PCI_DEVICE_ID_AMD_10H_NB_DRAM , - .max_mcs =2 , - .ops = { - .early_channel_count = f1x_early_channel_count, - .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, - .dbam_to_cs = f10_dbam_to_chip_select, - } - }, - [F15_CPUS ] = { - .ctl_name ="F15h" , - .f1_id =PCI_DEVICE_ID_AMD_15H_NB_F1 , - .f2_id =PCI_DEVICE_ID_AMD_15H_NB_F2 , - .max_mcs =2 , - .ops = { - .early_channel_count = f1x_early_channel_count, - .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, - .dbam_to_cs = f15_dbam_to_chip_select, - } - }, - [F15_M30H_CPUS ] = { - .ctl_name ="F15h_M30h" , - .f1_id =PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 , - .f2_id =PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 , - .max_mcs =2 , - .ops = { - .early_channel_count = f1x_early_channel_count, - .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, - .dbam_to_cs = f16_dbam_to_chip_select, - } - }, - [F15_M60H_CPUS ] = { - .ctl_name ="F15h_M60h" , - .f1_id =PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 , - .f2_id =PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 , - .max_mcs =2 , - .ops = { - .early_channel_count = f1x_early_channel_count, - .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, - .dbam_to_cs = f15_m60h_dbam_to_chip_select, - } - }, - [F16_CPUS ] = { - .ctl_name ="F16h" , - .f1_id =PCI_DEVICE_ID_AMD_16H_NB_F1 , - .f2_id =PCI_DEVICE_ID_AMD_16H_NB_F2 , - .max_mcs =2 , - .ops = { - .early_channel_count = f1x_early_channel_count, - .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, - .dbam_to_cs = f16_dbam_to_chip_select, - } - }, - [F16_M30H_CPUS ] = { - .ctl_name ="F16h_M30h" , - .f1_id =PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 , - .f2_id =PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 , - .max_mcs =2 , - .ops = { - .early_channel_count = f1x_early_channel_count, - .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, - .dbam_to_cs = f16_dbam_to_chip_select, - } - }, - [F17_CPUS ] = { - .ctl_name ="F17h" , - .f0_id =PCI_DEVICE_ID_AMD_17H_DF_F0 , - .f6_id =PCI_DEVICE_ID_AMD_17H_DF_F6 , - .max_mcs =2 , - .ops = { - .early_channel_count = f17_early_channel_count, - .dbam_to_cs = f17_addr_mask_to_cs_size, - } - }, - [F17_M10H_CPUS ] = { - .ctl_name ="F17h_M10h" , - .f0_id =PCI_DEVICE_ID_AMD_17H_M10H_DF_F0 , - .f6_id =PCI_DEVICE_ID_AMD_17H_M10H_DF_F6 , - .max_mcs =2 , - .ops = { - .early_channel_count = f17_early_channel_count, - .dbam_to_cs = f17_addr_mask_to_cs_size, - } - }, - [F17_M30H_CPUS ] = { - .ctl_name ="F17h_M30h" , - .f0_id =PCI_DEVICE_ID_AMD_17H_M30H_DF_F0 , - .f6_id =PCI_DEVICE_ID_AMD_17H_M30H_DF_F6 , - .max_mcs =8 , - .ops = { - .early_channel_count = f17_early_channel_count, - .dbam_to_cs = f17_addr_mask_to_cs_size, - } - }, - [F17_M60H_CPUS ] = { - .ctl_name ="F17h_M60h" , - .f0_id =PCI_DEVICE_ID_AMD_17H_M60H_DF_F0 , - .f6_id =PCI_DEVICE_ID_AMD_17H_M60H_DF_F6 , - .max_mcs =2 , - .ops = { - .early_channel_count = f17_early_channel_count, - .dbam_to_cs = f17_addr_mask_to_cs_size, - } - }, - [F17_M70H_CPUS ] = { - .ctl_name ="F17h_M70h" , - .f0_id =PCI_DEVICE_ID_AMD_17H_M70H_DF_F0 , - .f6_id =PCI_DEVICE_ID_AMD_17H_M70H_DF_F6 , - .max_mcs =2 , - .ops = { - .early_channel_count = f17_early_channel_count, - .dbam_to_cs = f17_addr_mask_to_cs_size, - } - }, - [F19_CPUS ] = { - .ctl_name ="F19h" , - .f0_id =PCI_DEVICE_ID_AMD_19H_DF_F0 , - .f6_id =PCI_DEVICE_ID_AMD_19H_DF_F6 , - .max_mcs =8 , - .ops = { - .early_channel_count = f17_early_channel_count, - .dbam_to_cs = f17_addr_mask_to_cs_size, - } - }, - [F19_M10H_CPUS ] = { - .ctl_name ="F19h_M10h" , - .f0_id =PCI_DEVICE_ID_AMD_19H_M10H_DF_F0 , - .f6_id =PCI_DEVICE_ID_AMD_19H_M10H_DF_F6 , - .max_mcs =12 , - .ops = { - .early_channel_count = f17_early_channel_count, - .dbam_to_cs = f17_addr_mask_to_cs_size, - } - }, - [F19_M50H_CPUS ] = { - .ctl_name ="F19h_M50h" , - .f0_id =PCI_DEVICE_ID_AMD_19H_M50H_DF_F0 , - .f6_id =PCI_DEVICE_ID_AMD_19H_M50H_DF_F6 , - .max_mcs =2 , - .ops = { - .early_channel_count = f17_early_channel_count, - .dbam_to_cs = f17_addr_mask_to_cs_size, - } - }, -}; -/* * These are tables of eigenvectors (one per line) which can be used for the * construction of the syndrome tables. The modified syndrome search algorithm
@@ -3896,7 +3734,7 @@ static void setup_mci_misc_attrs(struct mem_ctl_info *mci) mci->edac_cap =determine_edac_cap (pvt); mci->mod_name =EDAC_MOD_STR ; - mci->ctl_name = fam_type->ctl_name; + mci->ctl_name = pvt->ctl_name; mci->dev_name =pci_name (pvt->F3); mci->ctl_page_to_phys =NULL ;
@@ -3908,111 +3746,143 @@ static void setup_mci_misc_attrs(struct mem_ctl_info *mci)/* * returns a pointer to the family descriptor on success, NULL otherwise. */ -static struct amd64_family_type *per_family_init (struct amd64_pvt *pvt) +static int per_family_init (struct amd64_pvt *pvt) { pvt->ext_model = boot_cpu_data.x86_model >>4 ; pvt->stepping = boot_cpu_data.x86_stepping; pvt->model = boot_cpu_data.x86_model; pvt->fam = boot_cpu_data.x86; + pvt->max_mcs =2 ;switch (pvt->fam) {case 0xf : - fam_type = &family_types[K8_CPUS ]; - pvt->ops = &family_types[K8_CPUS ].ops; + pvt->ctl_name = (pvt->ext_model >K8_REV_F ) ? +"K8 revF or later" :"K8 revE or earlier" ; + pvt->f1_id =PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP ; + pvt->f2_id =PCI_DEVICE_ID_AMD_K8_NB_MEMCTL ; + pvt->ops->early_channel_count = k8_early_channel_count; + pvt->ops->map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow; + pvt->ops->dbam_to_cs = k8_dbam_to_chip_select;break ;case 0x10 : - fam_type = &family_types[F10_CPUS ]; - pvt->ops = &family_types[F10_CPUS ].ops; + pvt->ctl_name ="F10h" ; + pvt->f1_id =PCI_DEVICE_ID_AMD_10H_NB_MAP ; + pvt->f2_id =PCI_DEVICE_ID_AMD_10H_NB_DRAM ; + pvt->ops->early_channel_count = f1x_early_channel_count; + pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; + pvt->ops->dbam_to_cs = f10_dbam_to_chip_select;break ;case 0x15 :if (pvt->model ==0x30 ) { - fam_type = &family_types[F15_M30H_CPUS ]; - pvt->ops = &family_types[F15_M30H_CPUS ].ops; -break ; + pvt->ctl_name ="F15h_M30h" ; + pvt->f1_id =PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 ; + pvt->f2_id =PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 ; + pvt->ops->dbam_to_cs = f16_dbam_to_chip_select; }else if (pvt->model ==0x60 ) { - fam_type = &family_types[F15_M60H_CPUS ]; - pvt->ops = &family_types[F15_M60H_CPUS ].ops; -break ; -/* Richland is only client */ + pvt->ctl_name ="F15h_M60h" ; + pvt->f1_id =PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 ; + pvt->f2_id =PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 ; + pvt->ops->dbam_to_cs = f15_m60h_dbam_to_chip_select; }else if (pvt->model ==0x13 ) { -return NULL ; +/* Richland is only client */ +return -ENODEV ; }else { - fam_type = &family_types[F15_CPUS ]; - pvt->ops = &family_types[F15_CPUS ].ops; + pvt->ctl_name ="F15h" ; + pvt->f1_id =PCI_DEVICE_ID_AMD_15H_NB_F1 ; + pvt->f2_id =PCI_DEVICE_ID_AMD_15H_NB_F2 ; + pvt->ops->dbam_to_cs = f15_dbam_to_chip_select; } + pvt->ops->early_channel_count = f1x_early_channel_count; + pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow;break ;case 0x16 :if (pvt->model ==0x30 ) { - fam_type = &family_types[F16_M30H_CPUS ]; - pvt->ops = &family_types[F16_M30H_CPUS ].ops; -break ; + pvt->ctl_name ="F16h_M30h" ; + pvt->f1_id =PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 ; + pvt->f2_id =PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 ; + }else { + pvt->ctl_name ="F16h" ; + pvt->f1_id =PCI_DEVICE_ID_AMD_16H_NB_F1 ; + pvt->f2_id =PCI_DEVICE_ID_AMD_16H_NB_F2 ; } - fam_type = &family_types[F16_CPUS ]; - pvt->ops = &family_types[F16_CPUS ].ops; + pvt->ops->early_channel_count = f1x_early_channel_count; + pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; + pvt->ops->dbam_to_cs = f16_dbam_to_chip_select;break ;case 0x17 :if (pvt->model >=0x10 && pvt->model <=0x2f ) { - fam_type = &family_types[F17_M10H_CPUS ]; - pvt->ops = &family_types[F17_M10H_CPUS ].ops; -break ; + pvt->ctl_name ="F17h_M10h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_17H_M10H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_17H_M10H_DF_F6 ; }else if (pvt->model >=0x30 && pvt->model <=0x3f ) { - fam_type = &family_types[F17_M30H_CPUS ]; - pvt->ops = &family_types[F17_M30H_CPUS ].ops; -break ; + pvt->ctl_name ="F17h_M30h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_17H_M30H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_17H_M30H_DF_F6 ; + pvt->max_mcs =8 ; }else if (pvt->model >=0x60 && pvt->model <=0x6f ) { - fam_type = &family_types[F17_M60H_CPUS ]; - pvt->ops = &family_types[F17_M60H_CPUS ].ops; -break ; + pvt->ctl_name ="F17h_M60h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_17H_M60H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_17H_M60H_DF_F6 ; }else if (pvt->model >=0x70 && pvt->model <=0x7f ) { - fam_type = &family_types[F17_M70H_CPUS ]; - pvt->ops = &family_types[F17_M70H_CPUS ].ops; -break ; + pvt->ctl_name ="F17h_M70h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_17H_M70H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_17H_M70H_DF_F6 ; + }else { + pvt->ctl_name ="F17h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_17H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_17H_DF_F6 ; } fallthrough;case 0x18 : - fam_type = &family_types[F17_CPUS ]; - pvt->ops = &family_types[F17_CPUS ].ops; + pvt->ops->early_channel_count = f17_early_channel_count; + pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; -if (pvt->fam ==0x18 ) - family_types[F17_CPUS ].ctl_name ="F18h" ; +if (pvt->fam ==0x18 ) { + pvt->ctl_name ="F18h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_17H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_17H_DF_F6 ; + }break ;case 0x19 :if (pvt->model >=0x10 && pvt->model <=0x1f ) { - fam_type = &family_types[F19_M10H_CPUS ]; - pvt->ops = &family_types[F19_M10H_CPUS ].ops; -break ; + pvt->ctl_name ="F19h_M10h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_19H_M10H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_19H_M10H_DF_F6 ; + pvt->max_mcs =12 ; }else if (pvt->model >=0x20 && pvt->model <=0x2f ) { - fam_type = &family_types[F17_M70H_CPUS ]; - pvt->ops = &family_types[F17_M70H_CPUS ].ops; - fam_type->ctl_name ="F19h_M20h" ; -break ; + pvt->ctl_name ="F19h_M20h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_17H_M70H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_17H_M70H_DF_F6 ; }else if (pvt->model >=0x50 && pvt->model <=0x5f ) { - fam_type = &family_types[F19_M50H_CPUS ]; - pvt->ops = &family_types[F19_M50H_CPUS ].ops; - fam_type->ctl_name ="F19h_M50h" ; -break ; + pvt->ctl_name ="F19h_M50h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_19H_M50H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_19H_M50H_DF_F6 ; }else if (pvt->model >=0xa0 && pvt->model <=0xaf ) { - fam_type = &family_types[F19_M10H_CPUS ]; - pvt->ops = &family_types[F19_M10H_CPUS ].ops; - fam_type->ctl_name ="F19h_MA0h" ; -break ; + pvt->ctl_name ="F19h_MA0h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_19H_M10H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_19H_M10H_DF_F6 ; + pvt->max_mcs =12 ; + }else { + pvt->ctl_name ="F19h" ; + pvt->f0_id =PCI_DEVICE_ID_AMD_19H_DF_F0 ; + pvt->f6_id =PCI_DEVICE_ID_AMD_19H_DF_F6 ; + pvt->max_mcs =8 ; } - fam_type = &family_types[F19_CPUS ]; - pvt->ops = &family_types[F19_CPUS ].ops; - family_types[F19_CPUS ].ctl_name ="F19h" ; + pvt->ops->early_channel_count = f17_early_channel_count; + pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size;break ;default :amd64_err ("Unsupported family!\n" ); -return NULL ; +return -ENODEV ; } -return fam_type; +return 0 ; }static const struct attribute_group *amd64_edac_attr_groups[] = {
@@ -4029,15 +3899,15 @@ static int hw_info_get(struct amd64_pvt *pvt)int ret;if (pvt->fam >=0x17 ) { - pvt->umc =kcalloc (fam_type->max_mcs,sizeof (struct amd64_umc ),GFP_KERNEL ); + pvt->umc =kcalloc (pvt->max_mcs,sizeof (struct amd64_umc ),GFP_KERNEL );if (!pvt->umc)return -ENOMEM ; - pci_id1 = fam_type->f0_id; - pci_id2 = fam_type->f6_id; + pci_id1 = pvt->f0_id; + pci_id2 = pvt->f6_id; }else { - pci_id1 = fam_type->f1_id; - pci_id2 = fam_type->f2_id; + pci_id1 = pvt->f1_id; + pci_id2 = pvt->f2_id; } ret =reserve_mc_sibling_devs (pvt, pci_id1, pci_id2);
@@ -4083,7 +3953,7 @@ static int init_one_instance(struct amd64_pvt *pvt)* only one channel. Also, this simplifies handling later for the price * of a couple of KBs tops. */ - layers[1 ].size = fam_type->max_mcs; + layers[1 ].size = pvt->max_mcs; layers[1 ].is_virt_csrow = false; mci =edac_mc_alloc (pvt->mc_node_id,ARRAY_SIZE (layers), layers,0 );
@@ -4113,7 +3983,7 @@ static bool instance_has_memory(struct amd64_pvt *pvt)bool cs_enabled = false;int cs =0 , dct =0 ; -for (dct =0 ; dct < fam_type->max_mcs; dct++) { +for (dct =0 ; dct < pvt->max_mcs; dct++) {for_each_chip_select (cs, dct, pvt) cs_enabled |=csrow_enabled (cs, dct, pvt); }
@@ -4142,10 +4012,13 @@ static int probe_one_instance(unsigned int nid) pvt->mc_node_id = nid; pvt->F3 =F3 ; + pvt->ops =kzalloc (sizeof (*pvt->ops),GFP_KERNEL ); +if (!pvt->ops) + goto err_out; + ret = -ENODEV ; - fam_type =per_family_init (pvt); -if (!fam_type) - goto err_enable; +if (per_family_init (pvt)) + goto err_out; ret =hw_info_get (pvt);if (ret <0 )
@@ -4183,11 +4056,7 @@ static int probe_one_instance(unsigned int nid) goto err_enable; } -amd64_info ("%s %sdetected (node %d).\n" , fam_type->ctl_name, - (pvt->fam ==0xf ? - (pvt->ext_model >=K8_REV_F ?"revF or later " - :"revE or earlier " ) - :"" ), pvt->mc_node_id); +amd64_info ("%s detected (node %d).\n" , pvt->ctl_name, pvt->mc_node_id);dump_misc_regs (pvt);
drivers/edac/amd64_edac.h +10 -32
60 lines not on this page · raw message
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 01/14] EDAC/amd64: Move struct fam_type variables into struct amd64_pvt
Quoted 1 line · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
...
Quoted 25 lines
drivers/edac/amd64_edac.c +9
-5-static struct amd64_family_type *per_family_init (struct amd64_pvt *pvt) +static int per_family_init (struct amd64_pvt *pvt) { pvt->ext_model = boot_cpu_data.x86_model >>4 ; pvt->stepping = boot_cpu_data.x86_stepping; pvt->model = boot_cpu_data.x86_model; pvt->fam = boot_cpu_data.x86; + pvt->max_mcs =2 ;switch (pvt->fam) {case 0xf : - fam_type = &family_types[K8_CPUS ]; - pvt->ops = &family_types[K8_CPUS ].ops; + pvt->ctl_name = (pvt->ext_model >K8_REV_F ) ? +"K8 revF or later" :"K8 revE or earlier" ; + pvt->f1_id =PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP ; + pvt->f2_id =PCI_DEVICE_ID_AMD_K8_NB_MEMCTL ; + pvt->ops->early_channel_count = k8_early_channel_count; + pvt->ops->map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow; + pvt->ops->dbam_to_cs = k8_dbam_to_chip_select;break ;case 0x10 : - fam_type = &family_types[F10_CPUS ]; - pvt->ops = &family_types[F10_CPUS ].ops;
drivers/edac/amd64_edac.c static void setup_mci_misc_attrs(struct mem_ctl_info *mci) · line 3778
Quoted 10 lines
drivers/edac/amd64_edac.c +6
-0+ pvt->ctl_name ="F10h" ; + pvt->f1_id =PCI_DEVICE_ID_AMD_10H_NB_MAP ; + pvt->f2_id =PCI_DEVICE_ID_AMD_10H_NB_DRAM ; + pvt->ops->early_channel_count = f1x_early_channel_count; + pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; + pvt->ops->dbam_to_cs = f10_dbam_to_chip_select;break ;case 0x15 :if (pvt->model ==0x30 ) {
I just noticed that families 15h and 16h aren't matching against a model range. I think we should look into that.
...
drivers/edac/amd64_edac.c static int probe_one_instance(unsigned int nid) · line 4018
Quoted 8 lines
drivers/edac/amd64_edac.c +4
-0@@ -4142,10 +4012,13 @@ static int probe_one_instance(unsigned int nid) pvt->mc_node_id = nid; pvt->F3 =F3 ; + pvt->ops =kzalloc (sizeof (*pvt->ops),GFP_KERNEL ); +if (!pvt->ops) + goto err_out; +
This should goto err_enable so that pvt and above can be freed.
drivers/edac/amd64_edac.c static int probe_one_instance(unsigned int nid) · line 4022
Quoted 7 lines
drivers/edac/amd64_edac.c +2
-3ret = -ENODEV ; - fam_type =per_family_init (pvt); -if (!fam_type) - goto err_enable; +if (per_family_init (pvt)) + goto err_out;
Same here, but pvt->ops should also be freed at this point too.
Thanks,
Yazen
Borislav Petkov
maintainerRe: [PATCH 01/14] EDAC/amd64: Move struct fam_type variables into struct amd64_pvt
Quoted 2 lines · Yazen Ghannam
I just noticed that families 15h and 16h aren't matching against a model range. I think we should look into that.
And while you're doing that, you could make those ranges a lot more readable by using a second switch-case on the model. For example, with F19h:
case 0x19:
switch (pvt->model) {
case 0x10 ... 0x1f:
fam_type = &family_types[F19_M10H_CPUS];
pvt->ops = &family_types[F19_M10H_CPUS].ops;
break;
case 0x20 ... 0x2f:
fam_type = &family_types[F17_M70H_CPUS];
pvt->ops = &family_types[F17_M70H_CPUS].ops;
fam_type->ctl_name = "F19h_M20h";
break;
case 0x50 ... 0x5f:
fam_type = &family_types[F19_M50H_CPUS];
pvt->ops = &family_types[F19_M50H_CPUS].ops;
fam_type->ctl_name = "F19h_M50h";
break;
case 0xa0 ... 0xaf:
fam_type = &family_types[F19_M10H_CPUS];
pvt->ops = &family_types[F19_M10H_CPUS].ops;
fam_type->ctl_name = "F19h_MA0h";
break;
default:
fam_type = &family_types[F19_CPUS];
pvt->ops = &family_types[F19_CPUS].ops;
family_types[F19_CPUS].ctl_name = "F19h";
break;
}
break;Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteA message that is not in the archive (sent off-list or not yet received): [email protected]
Yazen Ghannam
maintainerRe: [PATCH 01/14] EDAC/amd64: Move struct fam_type variables into struct amd64_pvt
On Thu, Mar 31, 2022 at 05:45:39PM +0530, Chatradhi, Naveen Krishna wrote:
...
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
case 0x15: if (pvt->model == 0x30) {I just noticed that families 15h and 16h aren't matching against a model range. I think we should look into that.
The diff seems fine to me. Yazen, do you have any inputs on this ?
Right, I think this patch is moving the code around correctly. But the code seems incorrect. So I think it should be fixed if it is indeed incorrect.
Quoted 56 lines
Quoted 11 lines
...
drivers/edac/amd64_edac.c static int probe_one_instance(unsigned int nid) · line 4017
Quoted 7 lines
drivers/edac/amd64_edac.c +4
-0@@ -4142,10 +4012,13 @@ static int probe_one_instance(unsigned int nid) pvt->mc_node_id = nid; pvt->F3 =F3 ; + pvt->ops =kzalloc (sizeof (*pvt->ops),GFP_KERNEL ); +if (!pvt->ops) + goto err_out; +This should goto
err_enableso that pvt and above can be freed.Quoted 8 lines
drivers/edac/amd64_edac.c static int probe_one_instance(unsigned int nid) · line 4022
Quoted 7 lines
drivers/edac/amd64_edac.c +2
-3ret = -ENODEV ; - fam_type =per_family_init (pvt); -if (!fam_type) - goto err_enable; +if (per_family_init (pvt)) + goto err_out;Same here, but
pvt->opsshould also be freed at this point too.The
hw_info_get()is not called till this point, calling gotoerr_enablewould unnecessarily callhw_info_put()in the exit path. Better to introduce goto
err_pvtand gotoerr_pvt_opslike below Or can i split the functionby moving the structure allocation part into a separate helper routine ?
(quoted diff) +3
-3@@ -4101,15 +4101,15 @@ static int probe_one_instance(unsigned int nid) pvt->ops = kzalloc(sizeof(*pvt->ops), GFP_KERNEL); if (!pvt->ops) - goto err_enable; + goto err_pvt; ret = -ENODEV; if (per_family_init(pvt)) - goto err_enable; + goto err_pvt_ops; ret = hw_info_get(pvt); if (ret < 0) - goto err_enable; + goto err_pvt_ops; ret = 0; if (!instance_has_memory(pvt)) {@@ -4151,6 +4151,11 @@ static int probe_one_instance(unsigned int nid)err_enable:
hw_info_put(pvt);(quoted diff) +5
-0+ +err_pvt_ops: + kfree(pvt->ops); + +err_pvt:
Quoted 2 lines
kfree(pvt);
This seems okay to me.
Thanks,
Yazen
PATCH 2/14 EDAC/amd64: Add get_base_mask() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for get_base_mask() in pvt->ops
and assign family specific get_base_mask() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 22 ++++++++++++++++------ drivers/edac/amd64_edac.h | 1 + 2 files changed, 17 insertions(+), 6 deletions(-)
drivers/edac/amd64_edac.c +16 -6
@@ -1570,11 +1570,6 @@ static void read_dct_base_mask(struct amd64_pvt *pvt) {int cs; -prep_chip_selects (pvt); - -if (pvt->umc) -return read_umc_base_mask (pvt); -for_each_chip_select (cs,0 , pvt) {int reg0 =DCSB0 + (cs *4 );int reg1 =DCSB1 + (cs *4 );
@@ -3287,7 +3282,9 @@ static void read_mc_regs(struct amd64_pvt *pvt) } skip: -read_dct_base_mask (pvt); +prep_chip_selects (pvt); + + pvt->ops->get_base_mask (pvt);determine_memory_type (pvt);edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]);
@@ -3763,6 +3760,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = k8_early_channel_count; pvt->ops->map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = k8_dbam_to_chip_select; + pvt->ops->get_base_mask = read_dct_base_mask;break ;case 0x10 :
@@ -3772,6 +3770,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = f1x_early_channel_count; pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = f10_dbam_to_chip_select; + pvt->ops->get_base_mask = read_dct_base_mask;break ;case 0x15 :
@@ -3796,6 +3795,7 @@ static int per_family_init(struct amd64_pvt *pvt) } pvt->ops->early_channel_count = f1x_early_channel_count; pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; + pvt->ops->get_base_mask = read_dct_base_mask;break ;case 0x16 :
@@ -3811,6 +3811,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = f1x_early_channel_count; pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = f16_dbam_to_chip_select; + pvt->ops->get_base_mask = read_dct_base_mask;break ;case 0x17 :
@@ -3840,6 +3841,7 @@ static int per_family_init(struct amd64_pvt *pvt)case 0x18 : pvt->ops->early_channel_count = f17_early_channel_count; pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; + pvt->ops->get_base_mask = read_umc_base_mask;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3875,6 +3877,7 @@ static int per_family_init(struct amd64_pvt *pvt) } pvt->ops->early_channel_count = f17_early_channel_count; pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; + pvt->ops->get_base_mask = read_umc_base_mask;break ;default :
@@ -3882,6 +3885,13 @@ static int per_family_init(struct amd64_pvt *pvt)return -ENODEV ; } +/* ops required for all the families */ +if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || + !pvt->ops->get_base_mask) { +edac_dbg (1 ,"Common helper routines not defined.\n" ); +return -EFAULT ; + } +return 0 ; }
drivers/edac/amd64_edac.h +1 -0
@@ -464,6 +464,7 @@ struct low_ops { struct err_info *err);int (*dbam_to_cs)(struct amd64_pvt *pvt,u8 dct,unsigned int cs_mode,int cs_mask_nr); +void (*get_base_mask)(struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 02/14] EDAC/amd64: Add get_base_mask() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
get_base_mask()inpvt->ops
and assign family specificget_base_mask()definitions appropriately.
The commit message should include why the change is needed and not just what the change is. A few of my patches have similar feedback, so it's fresh in my mind. :)
Quoted 78 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 22 ++++++++++++++++------ drivers/edac/amd64_edac.h | 1 + 2 files changed, 17 insertions(+), 6 deletions(-)drivers/edac/amd64_edac.c +8
-6@@ -1570,11 +1570,6 @@ static void read_dct_base_mask(struct amd64_pvt *pvt) {int cs; -prep_chip_selects (pvt); - -if (pvt->umc) -return read_umc_base_mask (pvt); -for_each_chip_select (cs,0 , pvt) {int reg0 =DCSB0 + (cs *4 );int reg1 =DCSB1 + (cs *4 );@@ -3287,7 +3282,9 @@ static void read_mc_regs(struct amd64_pvt *pvt) } skip: -read_dct_base_mask (pvt); +prep_chip_selects (pvt); + + pvt->ops->get_base_mask (pvt);determine_memory_type (pvt);edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]);@@ -3763,6 +3760,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = k8_early_channel_count; pvt->ops->map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = k8_dbam_to_chip_select; + pvt->ops->get_base_mask = read_dct_base_mask;break ;case 0x10 :@@ -3772,6 +3770,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = f1x_early_channel_count; pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = f10_dbam_to_chip_select; + pvt->ops->get_base_mask = read_dct_base_mask;break ;case 0x15 :@@ -3796,6 +3795,7 @@ static int per_family_init(struct amd64_pvt *pvt) } pvt->ops->early_channel_count = f1x_early_channel_count; pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; + pvt->ops->get_base_mask = read_dct_base_mask;break ;case 0x16 :@@ -3811,6 +3811,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = f1x_early_channel_count; pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = f16_dbam_to_chip_select; + pvt->ops->get_base_mask = read_dct_base_mask;break ;case 0x17 :@@ -3840,6 +3841,7 @@ static int per_family_init(struct amd64_pvt *pvt)case 0x18 : pvt->ops->early_channel_count = f17_early_channel_count; pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; + pvt->ops->get_base_mask = read_umc_base_mask;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
drivers/edac/amd64_edac.c static int per_family_init(struct amd64_pvt *pvt) · line 3880
Quoted 4 lines
drivers/edac/amd64_edac.c +1
-0@@ -3875,6 +3877,7 @@ static int per_family_init(struct amd64_pvt *pvt) } pvt->ops->early_channel_count = f17_early_channel_count; pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; + pvt->ops->get_base_mask = read_umc_base_mask;
The function pointer is get_base_mask() and the helper functions are read_{dct,umc}_base_mask(). I think the naming should be more consistent. Either read_base_mask()/read_{dct,umc}_base_mask() or get_base_mask()/get_{dct,umc}_base_mask().
Quoted 4 lines
drivers/edac/amd64_edac.c +0
-0break ;default :
drivers/edac/amd64_edac.c static int per_family_init(struct amd64_pvt *pvt) · line 3894
Quoted 10 lines
drivers/edac/amd64_edac.c +7
-0@@ -3882,6 +3885,13 @@ static int per_family_init(struct amd64_pvt *pvt)return -ENODEV ; } +/* ops required for all the families */ +if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || + !pvt->ops->get_base_mask) { +edac_dbg (1 ,"Common helper routines not defined.\n" ); +return -EFAULT ; + } +
I think it'd be clearer if we define an ops struct with default, "do nothing" functions and statically include this in struct pvt. These can then be overwritten in per_family_init(). I think this would avoid the need to check that each function is set and the need to dynamically allocate the ops struct.
Thanks,
Yazen
Borislav Petkov
maintainerRe: [PATCH 02/14] EDAC/amd64: Add get_base_mask() into pvt->ops
Quoted 3 lines · Yazen Ghannam
The commit message should include why the change is needed and not just what the change is. A few of my patches have similar feedback, so it's fresh in my mind. :)
Good. :-)
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquettePATCH 3/14 EDAC/amd64: Add prep_chip_selects() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for prep_chip_selects() in pvt->ops and assign family specific prep_chip_selects() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 68 ++++++++++++++++++++++++++++----------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 50 insertions(+), 19 deletions(-)
drivers/edac/amd64_edac.c +49 -19
@@ -1490,28 +1490,51 @@ static void dump_misc_regs(struct amd64_pvt *pvt)/* * See BKDG, F2x[1,0][5C:40], F2[1,0][6C:60] */ -static void prep_chip_selects (struct amd64_pvt *pvt) +static void k8_prep_chip_selects (struct amd64_pvt *pvt) { -if (pvt->fam ==0xf && pvt->ext_model <K8_REV_F ) { - pvt->csels[0 ].b_cnt = pvt->csels[1 ].b_cnt =8 ; - pvt->csels[0 ].m_cnt = pvt->csels[1 ].m_cnt =8 ; - }else if (pvt->fam ==0x15 && pvt->model ==0x30 ) { - pvt->csels[0 ].b_cnt = pvt->csels[1 ].b_cnt =4 ; - pvt->csels[0 ].m_cnt = pvt->csels[1 ].m_cnt =2 ; - }else if (pvt->fam >=0x17 ) { -int umc; - -for_each_umc (umc) { - pvt->csels[umc].b_cnt =4 ; - pvt->csels[umc].m_cnt =2 ; - } +if (pvt->ext_model <K8_REV_F ) { + pvt->csels[0 ].b_cnt =8 ; + pvt->csels[1 ].b_cnt =8 ; + + pvt->csels[0 ].m_cnt =8 ; + pvt->csels[1 ].m_cnt =8 ; + }else if (pvt->ext_model >=K8_REV_F ) { + pvt->csels[0 ].b_cnt =8 ; + pvt->csels[1 ].b_cnt =8 ; + + pvt->csels[0 ].m_cnt =4 ; + pvt->csels[1 ].m_cnt =4 ; + } +} - }else { - pvt->csels[0 ].b_cnt = pvt->csels[1 ].b_cnt =8 ; - pvt->csels[0 ].m_cnt = pvt->csels[1 ].m_cnt =4 ; +static void f15_m30h_prep_chip_selects (struct amd64_pvt *pvt) +{ + pvt->csels[0 ].b_cnt =4 ; + pvt->csels[1 ].b_cnt =4 ; + + pvt->csels[0 ].m_cnt =2 ; + pvt->csels[1 ].m_cnt =2 ; +} + +static void f17_prep_chip_selects (struct amd64_pvt *pvt) +{ +int umc; + +for_each_umc (umc) { + pvt->csels[umc].b_cnt =4 ; + pvt->csels[umc].m_cnt =2 ; } } +static void default_prep_chip_selects (struct amd64_pvt *pvt) +{ + pvt->csels[0 ].b_cnt =8 ; + pvt->csels[1 ].b_cnt =8 ; + + pvt->csels[0 ].m_cnt =4 ; + pvt->csels[1 ].m_cnt =4 ; +} +static void read_umc_base_mask (struct amd64_pvt *pvt) {u32 umc_base_reg, umc_base_reg_sec;
@@ -3282,7 +3305,7 @@ static void read_mc_regs(struct amd64_pvt *pvt) } skip: -prep_chip_selects (pvt); + pvt->ops->prep_chip_selects (pvt); pvt->ops->get_base_mask (pvt);
@@ -3761,6 +3784,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = k8_dbam_to_chip_select; pvt->ops->get_base_mask = read_dct_base_mask; + pvt->ops->prep_chip_selects = k8_prep_chip_selects;break ;case 0x10 :
@@ -3771,6 +3795,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = f10_dbam_to_chip_select; pvt->ops->get_base_mask = read_dct_base_mask; + pvt->ops->prep_chip_selects = default_prep_chip_selects;break ;case 0x15 :
@@ -3779,11 +3804,13 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->f1_id =PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 ; pvt->f2_id =PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 ; pvt->ops->dbam_to_cs = f16_dbam_to_chip_select; + pvt->ops->prep_chip_selects = f15_m30h_prep_chip_selects; }else if (pvt->model ==0x60 ) { pvt->ctl_name ="F15h_M60h" ; pvt->f1_id =PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 ; pvt->f2_id =PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 ; pvt->ops->dbam_to_cs = f15_m60h_dbam_to_chip_select; + pvt->ops->prep_chip_selects = default_prep_chip_selects; }else if (pvt->model ==0x13 ) {/* Richland is only client */ return -ENODEV ;
@@ -3812,6 +3839,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = f16_dbam_to_chip_select; pvt->ops->get_base_mask = read_dct_base_mask; + pvt->ops->prep_chip_selects = default_prep_chip_selects;break ;case 0x17 :
@@ -3842,6 +3870,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = f17_early_channel_count; pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; pvt->ops->get_base_mask = read_umc_base_mask; + pvt->ops->prep_chip_selects = f17_prep_chip_selects;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3878,6 +3907,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = f17_early_channel_count; pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; pvt->ops->get_base_mask = read_umc_base_mask; + pvt->ops->prep_chip_selects = f17_prep_chip_selects;break ;default :
@@ -3887,7 +3917,7 @@ static int per_family_init(struct amd64_pvt *pvt)/* ops required for all the families */ if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || - !pvt->ops->get_base_mask) { + !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
drivers/edac/amd64_edac.h +1 -0
@@ -465,6 +465,7 @@ struct low_ops {int (*dbam_to_cs)(struct amd64_pvt *pvt,u8 dct,unsigned int cs_mode,int cs_mask_nr);void (*get_base_mask)(struct amd64_pvt *pvt); +void (*prep_chip_selects)(struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 03/14] EDAC/amd64: Add prep_chip_selects() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
prep_chip_selects()inpvt->opsand assign family specificprep_chip_selects()definitions appropriately.
Please include the "why" also.
Quoted 28 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 68 ++++++++++++++++++++++++++++----------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 50 insertions(+), 19 deletions(-)drivers/edac/amd64_edac.c +1
-8@@ -1490,28 +1490,51 @@ static void dump_misc_regs(struct amd64_pvt *pvt)/* * See BKDG, F2x[1,0][5C:40], F2[1,0][6C:60] */ -static void prep_chip_selects (struct amd64_pvt *pvt) +static void k8_prep_chip_selects (struct amd64_pvt *pvt) { -if (pvt->fam ==0xf && pvt->ext_model <K8_REV_F ) { - pvt->csels[0 ].b_cnt = pvt->csels[1 ].b_cnt =8 ; - pvt->csels[0 ].m_cnt = pvt->csels[1 ].m_cnt =8 ; - }else if (pvt->fam ==0x15 && pvt->model ==0x30 ) { - pvt->csels[0 ].b_cnt = pvt->csels[1 ].b_cnt =4 ; - pvt->csels[0 ].m_cnt = pvt->csels[1 ].m_cnt =2 ; - }else if (pvt->fam >=0x17 ) {
drivers/edac/amd64_edac.c static void dump_misc_regs(struct amd64_pvt *pvt) · line 1498
Quoted 10 lines
drivers/edac/amd64_edac.c +4
-6-int umc; - -for_each_umc (umc) { - pvt->csels[umc].b_cnt =4 ; - pvt->csels[umc].m_cnt =2 ; - } +if (pvt->ext_model <K8_REV_F ) { + pvt->csels[0 ].b_cnt =8 ; + pvt->csels[1 ].b_cnt =8 ; +
"b_cnt" is the same for both conditions, so these lines can be moved out of the if-else statements.
drivers/edac/amd64_edac.c static void dump_misc_regs(struct amd64_pvt *pvt) · line 1501
Quoted 3 lines
drivers/edac/amd64_edac.c +3
-0+ pvt->csels[0 ].m_cnt =8 ; + pvt->csels[1 ].m_cnt =8 ; + }else if (pvt->ext_model >=K8_REV_F ) {
This can just be an "else".
Quoted 8 lines
drivers/edac/amd64_edac.c +7
-0+ pvt->csels[0 ].b_cnt =8 ; + pvt->csels[1 ].b_cnt =8 ; + + pvt->csels[0 ].m_cnt =4 ; + pvt->csels[1 ].m_cnt =4 ; + } +}
drivers/edac/amd64_edac.c static void dump_misc_regs(struct amd64_pvt *pvt) · line 1516
Quoted 10 lines
drivers/edac/amd64_edac.c +7
-3- }else { - pvt->csels[0 ].b_cnt = pvt->csels[1 ].b_cnt =8 ; - pvt->csels[0 ].m_cnt = pvt->csels[1 ].m_cnt =4 ; +static void f15_m30h_prep_chip_selects (struct amd64_pvt *pvt) +{ + pvt->csels[0 ].b_cnt =4 ; + pvt->csels[1 ].b_cnt =4 ; + + pvt->csels[0 ].m_cnt =2 ; + pvt->csels[1 ].m_cnt =2 ;
Here, above, and below you can keep the single line style when setting variables to the same value.
Quoted 11 lines
drivers/edac/amd64_edac.c +9
-0+} + +static void f17_prep_chip_selects (struct amd64_pvt *pvt) +{ +int umc; + +for_each_umc (umc) { + pvt->csels[umc].b_cnt =4 ; + pvt->csels[umc].m_cnt =2 ; } }
drivers/edac/amd64_edac.c static void dump_misc_regs(struct amd64_pvt *pvt) · line 1537
Quoted 10 lines
drivers/edac/amd64_edac.c +9
-0+static void default_prep_chip_selects (struct amd64_pvt *pvt) +{ + pvt->csels[0 ].b_cnt =8 ; + pvt->csels[1 ].b_cnt =8 ; + + pvt->csels[0 ].m_cnt =4 ; + pvt->csels[1 ].m_cnt =4 ; +} +
This may be a good example of a default (though not "do nothing") function that can be set and overwritten when needed. That would save the NULL function pointer check and all the lines where the pointer gets set to this default function.
Quoted 59 lines
drivers/edac/amd64_edac.c +7
-1static void read_umc_base_mask (struct amd64_pvt *pvt) {u32 umc_base_reg, umc_base_reg_sec;@@ -3282,7 +3305,7 @@ static void read_mc_regs(struct amd64_pvt *pvt) } skip: -prep_chip_selects (pvt); + pvt->ops->prep_chip_selects (pvt); pvt->ops->get_base_mask (pvt);@@ -3761,6 +3784,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = k8_dbam_to_chip_select; pvt->ops->get_base_mask = read_dct_base_mask; + pvt->ops->prep_chip_selects = k8_prep_chip_selects;break ;case 0x10 :@@ -3771,6 +3795,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = f10_dbam_to_chip_select; pvt->ops->get_base_mask = read_dct_base_mask; + pvt->ops->prep_chip_selects = default_prep_chip_selects;break ;case 0x15 :@@ -3779,11 +3804,13 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->f1_id =PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 ; pvt->f2_id =PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 ; pvt->ops->dbam_to_cs = f16_dbam_to_chip_select; + pvt->ops->prep_chip_selects = f15_m30h_prep_chip_selects; }else if (pvt->model ==0x60 ) { pvt->ctl_name ="F15h_M60h" ; pvt->f1_id =PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 ; pvt->f2_id =PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 ; pvt->ops->dbam_to_cs = f15_m60h_dbam_to_chip_select; + pvt->ops->prep_chip_selects = default_prep_chip_selects; }else if (pvt->model ==0x13 ) {/* Richland is only client */ return -ENODEV ;@@ -3812,6 +3839,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->dbam_to_cs = f16_dbam_to_chip_select; pvt->ops->get_base_mask = read_dct_base_mask; + pvt->ops->prep_chip_selects = default_prep_chip_selects;break ;case 0x17 :@@ -3842,6 +3870,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = f17_early_channel_count; pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; pvt->ops->get_base_mask = read_umc_base_mask; + pvt->ops->prep_chip_selects = f17_prep_chip_selects;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
drivers/edac/amd64_edac.c static int per_family_init(struct amd64_pvt *pvt) · line 3912
Quoted 6 lines
drivers/edac/amd64_edac.c +1
-0@@ -3878,6 +3907,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = f17_early_channel_count; pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; pvt->ops->get_base_mask = read_umc_base_mask; + pvt->ops->prep_chip_selects = f17_prep_chip_selects;break ;
I expect that all the Zen-based CPU ops will be the same. Also, I figure that Zen-based CPUs are likely the majority of AMD-based systems in use today, or at least those that will use updated kernel versions. So I think that the Zen-based CPU ops should be the default. GPU and legacy CPU ops can be set as needed during init time.
Thanks,
Yazen
PATCH 4/14 EDAC/amd64: Add determine_memory_type() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for determine_memory_type() in pvt->ops and assign family specific determine_memory_type() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 33 ++++++++++++++++++++------------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 21 insertions(+), 13 deletions(-)
drivers/edac/amd64_edac.c +20 -13
@@ -1632,20 +1632,10 @@ static void read_dct_base_mask(struct amd64_pvt *pvt) } } -static void determine_memory_type (struct amd64_pvt *pvt) +static void f1x_determine_memory_type (struct amd64_pvt *pvt) {u32 dram_ctrl, dcsm; -if (pvt->umc) { -if ((pvt->umc[0 ].dimm_cfg | pvt->umc[1 ].dimm_cfg) &BIT (5 )) - pvt->dram_type =MEM_LRDDR4 ; -else if ((pvt->umc[0 ].dimm_cfg | pvt->umc[1 ].dimm_cfg) &BIT (4 )) - pvt->dram_type =MEM_RDDR4 ; -else - pvt->dram_type =MEM_DDR4 ; -return ; - } -switch (pvt->fam) {case 0xf :if (pvt->ext_model >=K8_REV_F )
@@ -1701,6 +1691,16 @@ static void determine_memory_type(struct amd64_pvt *pvt) pvt->dram_type = (pvt->dclr0 &BIT (16 )) ?MEM_DDR3 :MEM_RDDR3 ; } +static void f17_determine_memory_type (struct amd64_pvt *pvt) +{ +if ((pvt->umc[0 ].dimm_cfg | pvt->umc[1 ].dimm_cfg) &BIT (5 )) + pvt->dram_type =MEM_LRDDR4 ; +else if ((pvt->umc[0 ].dimm_cfg | pvt->umc[1 ].dimm_cfg) &BIT (4 )) + pvt->dram_type =MEM_RDDR4 ; +else + pvt->dram_type =MEM_DDR4 ; +} +/* Get the number of DCT channels the memory controller is using. */ static int k8_early_channel_count (struct amd64_pvt *pvt) {
@@ -3309,7 +3309,7 @@ static void read_mc_regs(struct amd64_pvt *pvt) pvt->ops->get_base_mask (pvt); -determine_memory_type (pvt); + pvt->ops->determine_memory_type (pvt);edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]);determine_ecc_sym_sz (pvt);
@@ -3785,6 +3785,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->dbam_to_cs = k8_dbam_to_chip_select; pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->prep_chip_selects = k8_prep_chip_selects; + pvt->ops->determine_memory_type = f1x_determine_memory_type;break ;case 0x10 :
@@ -3796,6 +3797,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->dbam_to_cs = f10_dbam_to_chip_select; pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->prep_chip_selects = default_prep_chip_selects; + pvt->ops->determine_memory_type = f1x_determine_memory_type;break ;case 0x15 :
@@ -3823,6 +3825,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->early_channel_count = f1x_early_channel_count; pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->get_base_mask = read_dct_base_mask; + pvt->ops->determine_memory_type = f1x_determine_memory_type;break ;case 0x16 :
@@ -3840,6 +3843,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->dbam_to_cs = f16_dbam_to_chip_select; pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->prep_chip_selects = default_prep_chip_selects; + pvt->ops->determine_memory_type = f1x_determine_memory_type;break ;case 0x17 :
@@ -3871,6 +3875,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; pvt->ops->get_base_mask = read_umc_base_mask; pvt->ops->prep_chip_selects = f17_prep_chip_selects; + pvt->ops->determine_memory_type = f17_determine_memory_type;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3908,6 +3913,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->dbam_to_cs = f17_addr_mask_to_cs_size; pvt->ops->get_base_mask = read_umc_base_mask; pvt->ops->prep_chip_selects = f17_prep_chip_selects; + pvt->ops->determine_memory_type = f17_determine_memory_type;break ;default :
@@ -3917,7 +3923,8 @@ static int per_family_init(struct amd64_pvt *pvt)/* ops required for all the families */ if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || - !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects) { + !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects || + !pvt->ops->determine_memory_type) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
drivers/edac/amd64_edac.h +1 -0
@@ -466,6 +466,7 @@ struct low_ops { unsigned int cs_mode, int cs_mask_nr);void (*get_base_mask)(struct amd64_pvt *pvt);void (*prep_chip_selects)(struct amd64_pvt *pvt); +void (*determine_memory_type)(struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 04/14] EDAC/amd64: Add determine_memory_type() into pvt->ops
Quoted 6 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
determine_memory_type()inpvt->opsand assign family specificdetermine_memory_type()definitions appropriately.
Please include the "why".
Quoted 40 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 33 ++++++++++++++++++++------------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 21 insertions(+), 13 deletions(-)drivers/edac/amd64_edac.c +1
-11@@ -1632,20 +1632,10 @@ static void read_dct_base_mask(struct amd64_pvt *pvt) } } -static void determine_memory_type (struct amd64_pvt *pvt) +static void f1x_determine_memory_type (struct amd64_pvt *pvt) {u32 dram_ctrl, dcsm; -if (pvt->umc) { -if ((pvt->umc[0 ].dimm_cfg | pvt->umc[1 ].dimm_cfg) &BIT (5 )) - pvt->dram_type =MEM_LRDDR4 ; -else if ((pvt->umc[0 ].dimm_cfg | pvt->umc[1 ].dimm_cfg) &BIT (4 )) - pvt->dram_type =MEM_RDDR4 ; -else - pvt->dram_type =MEM_DDR4 ; -return ; - } -switch (pvt->fam) {case 0xf :if (pvt->ext_model >=K8_REV_F )@@ -1701,6 +1691,16 @@ static void determine_memory_type(struct amd64_pvt *pvt) pvt->dram_type = (pvt->dclr0 &BIT (16 )) ?MEM_DDR3 :MEM_RDDR3 ; }
drivers/edac/amd64_edac.c static void determine_memory_type(struct amd64_pvt *pvt) · line 1703
Quoted 10 lines
drivers/edac/amd64_edac.c +10
-0+static void f17_determine_memory_type (struct amd64_pvt *pvt) +{ +if ((pvt->umc[0 ].dimm_cfg | pvt->umc[1 ].dimm_cfg) &BIT (5 )) + pvt->dram_type =MEM_LRDDR4 ; +else if ((pvt->umc[0 ].dimm_cfg | pvt->umc[1 ].dimm_cfg) &BIT (4 )) + pvt->dram_type =MEM_RDDR4 ; +else + pvt->dram_type =MEM_DDR4 ; +} +
This will need some rework due to upstream changes.
Thanks,
Yazen
PATCH 5/14 EDAC/amd64: Add get_ecc_sym_sz() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for determine_ecc_sym_sz() in pvt->ops and assign family specific get_ecc_sym_sz() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 49 ++++++++++++++++++++++++--------------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 31 insertions(+), 19 deletions(-)
drivers/edac/amd64_edac.c +30 -19
@@ -3176,26 +3176,11 @@ static void free_mc_sibling_devs(struct amd64_pvt *pvt) } } -static void determine_ecc_sym_sz (struct amd64_pvt *pvt) +static void f1x_determine_ecc_sym_sz (struct amd64_pvt *pvt) { pvt->ecc_sym_sz =4 ; -if (pvt->umc) { -u8 i; - -for_each_umc (i) { -/* Check enabled channels only: */ -if (pvt->umc[i].sdp_ctrl &UMC_SDP_INIT ) { -if (pvt->umc[i].ecc_ctrl &BIT (9 )) { - pvt->ecc_sym_sz =16 ; -return ; - }else if (pvt->umc[i].ecc_ctrl &BIT (7 )) { - pvt->ecc_sym_sz =8 ; -return ; - } - } - } - }else if (pvt->fam >=0x10 ) { +if (pvt->fam >=0x10 ) {u32 tmp;amd64_read_pci_cfg (pvt->F3,EXT_NB_MCA_CFG , &tmp);
@@ -3209,6 +3194,26 @@ static void determine_ecc_sym_sz(struct amd64_pvt *pvt) } } +static void f17_determine_ecc_sym_sz (struct amd64_pvt *pvt) +{ +u8 i; + + pvt->ecc_sym_sz =4 ; + +for_each_umc (i) { +/* Check enabled channels only: */ +if (pvt->umc[i].sdp_ctrl &UMC_SDP_INIT ) { +if (pvt->umc[i].ecc_ctrl &BIT (9 )) { + pvt->ecc_sym_sz =16 ; +return ; + }else if (pvt->umc[i].ecc_ctrl &BIT (7 )) { + pvt->ecc_sym_sz =8 ; +return ; + } + } + } +} +/* * Retrieve the hardware registers of the memory controller. */
@@ -3312,7 +3317,7 @@ static void read_mc_regs(struct amd64_pvt *pvt) pvt->ops->determine_memory_type (pvt);edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]); -determine_ecc_sym_sz (pvt); + pvt->ops->determine_ecc_sym_sz (pvt); }/*
@@ -3786,6 +3791,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->prep_chip_selects = k8_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; + pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz;break ;case 0x10 :
@@ -3798,6 +3804,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->prep_chip_selects = default_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; + pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz;break ;case 0x15 :
@@ -3826,6 +3833,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow; pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->determine_memory_type = f1x_determine_memory_type; + pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz;break ;case 0x16 :
@@ -3844,6 +3852,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->prep_chip_selects = default_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; + pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz;break ;case 0x17 :
@@ -3876,6 +3885,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_base_mask = read_umc_base_mask; pvt->ops->prep_chip_selects = f17_prep_chip_selects; pvt->ops->determine_memory_type = f17_determine_memory_type; + pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3914,6 +3924,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_base_mask = read_umc_base_mask; pvt->ops->prep_chip_selects = f17_prep_chip_selects; pvt->ops->determine_memory_type = f17_determine_memory_type; + pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz;break ;default :
@@ -3924,7 +3935,7 @@ static int per_family_init(struct amd64_pvt *pvt)/* ops required for all the families */ if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects || - !pvt->ops->determine_memory_type) { + !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
drivers/edac/amd64_edac.h +1 -0
@@ -467,6 +467,7 @@ struct low_ops {void (*get_base_mask)(struct amd64_pvt *pvt);void (*prep_chip_selects)(struct amd64_pvt *pvt);void (*determine_memory_type)(struct amd64_pvt *pvt); +void (*determine_ecc_sym_sz)(struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 05/14] EDAC/amd64: Add get_ecc_sym_sz() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
determine_ecc_sym_sz()inpvt->opsand assign family specificget_ecc_sym_sz()definitions appropriately.
Please include the "why".
Quoted 56 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 49 ++++++++++++++++++++++++--------------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 31 insertions(+), 19 deletions(-)drivers/edac/amd64_edac.c +11
-17@@ -3176,26 +3176,11 @@ static void free_mc_sibling_devs(struct amd64_pvt *pvt) } } -static void determine_ecc_sym_sz (struct amd64_pvt *pvt) +static void f1x_determine_ecc_sym_sz (struct amd64_pvt *pvt) { pvt->ecc_sym_sz =4 ; -if (pvt->umc) { -u8 i; - -for_each_umc (i) { -/* Check enabled channels only: */ -if (pvt->umc[i].sdp_ctrl &UMC_SDP_INIT ) { -if (pvt->umc[i].ecc_ctrl &BIT (9 )) { - pvt->ecc_sym_sz =16 ; -return ; - }else if (pvt->umc[i].ecc_ctrl &BIT (7 )) { - pvt->ecc_sym_sz =8 ; -return ; - } - } - } - }else if (pvt->fam >=0x10 ) { +if (pvt->fam >=0x10 ) {u32 tmp;amd64_read_pci_cfg (pvt->F3,EXT_NB_MCA_CFG , &tmp);@@ -3209,6 +3194,26 @@ static void determine_ecc_sym_sz(struct amd64_pvt *pvt) } } +static void f17_determine_ecc_sym_sz (struct amd64_pvt *pvt) +{ +u8 i; + + pvt->ecc_sym_sz =4 ; + +for_each_umc (i) { +/* Check enabled channels only: */ +if (pvt->umc[i].sdp_ctrl &UMC_SDP_INIT ) {
drivers/edac/amd64_edac.c static void determine_ecc_sym_sz(struct amd64_pvt *pvt) · line 3215
Quoted 10 lines
drivers/edac/amd64_edac.c +10
-0+if (pvt->umc[i].ecc_ctrl &BIT (9 )) { + pvt->ecc_sym_sz =16 ; +return ; + }else if (pvt->umc[i].ecc_ctrl &BIT (7 )) { + pvt->ecc_sym_sz =8 ; +return ; + } + } + } +}
We should reconsider if this is needed. The ECC symbol size was needed on legacy systems to decode the syndrome. The MCA_SYND register includes the syndrome on Zen-based systems, so the symbol size is only used for a single pr_info().
Thanks,
Yazen
PATCH 6/14 EDAC/amd64: Add get_mc_regs() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for get_mc_regs() in pvt->ops and assign family specific get_mc_regs() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 77 +++++++++++++++++++++------------------ drivers/edac/amd64_edac.h | 1 + 2 files changed, 43 insertions(+), 35 deletions(-)
drivers/edac/amd64_edac.c +42 -35
@@ -3214,6 +3214,27 @@ static void f17_determine_ecc_sym_sz(struct amd64_pvt *pvt) } } +static void read_top_mem_registers (struct amd64_pvt *pvt) +{ +u64 msr_val; + +/* +* Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since +* those are Read-As-Zero. +*/ +rdmsrl (MSR_K8_TOP_MEM1 , pvt->top_mem); +edac_dbg (0 ," TOP_MEM: 0x%016llx\n" , pvt->top_mem); + +/* Check first whether TOP_MEM2 is enabled: */ +rdmsrl (MSR_AMD64_SYSCFG , msr_val); +if (msr_val &BIT (21 )) { +rdmsrl (MSR_K8_TOP_MEM2 , pvt->top_mem2); +edac_dbg (0 ," TOP_MEM2: 0x%016llx\n" , pvt->top_mem2); + }else { +edac_dbg (0 ," TOP_MEM2 disabled\n" ); + } +} +/* * Retrieve the hardware registers of the memory controller. */
@@ -3235,6 +3256,8 @@ static void __read_mc_regs_df(struct amd64_pvt *pvt)amd_smn_read (nid, umc_base +UMCCH_ECC_CTRL , &umc->ecc_ctrl);amd_smn_read (nid, umc_base +UMCCH_UMC_CAP_HI , &umc->umc_cap_hi); } + +amd64_read_pci_cfg (pvt->F0,DF_DHAR , &pvt->dhar); }/*
@@ -3244,30 +3267,8 @@ static void __read_mc_regs_df(struct amd64_pvt *pvt)static void read_mc_regs (struct amd64_pvt *pvt) {unsigned int range; -u64 msr_val; -/* -* Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since -* those are Read-As-Zero. -*/ -rdmsrl (MSR_K8_TOP_MEM1 , pvt->top_mem); -edac_dbg (0 ," TOP_MEM: 0x%016llx\n" , pvt->top_mem); - -/* Check first whether TOP_MEM2 is enabled: */ -rdmsrl (MSR_AMD64_SYSCFG , msr_val); -if (msr_val &BIT (21 )) { -rdmsrl (MSR_K8_TOP_MEM2 , pvt->top_mem2); -edac_dbg (0 ," TOP_MEM2: 0x%016llx\n" , pvt->top_mem2); - }else { -edac_dbg (0 ," TOP_MEM2 disabled\n" ); - } - -if (pvt->umc) { -__read_mc_regs_df (pvt); -amd64_read_pci_cfg (pvt->F0,DF_DHAR , &pvt->dhar); - - goto skip; - } +read_top_mem_registers (pvt);amd64_read_pci_cfg (pvt->F3,NBCAP , &pvt->nbcap);
@@ -3308,16 +3309,6 @@ static void read_mc_regs(struct amd64_pvt *pvt)amd64_read_dct_pci_cfg (pvt,1 ,DCLR0 , &pvt->dclr1);amd64_read_dct_pci_cfg (pvt,1 ,DCHR0 , &pvt->dchr1); } - -skip: - pvt->ops->prep_chip_selects (pvt); - - pvt->ops->get_base_mask (pvt); - - pvt->ops->determine_memory_type (pvt); -edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]); - - pvt->ops->determine_ecc_sym_sz (pvt); }/*
@@ -3792,6 +3783,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = k8_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x10 :
@@ -3805,6 +3797,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = default_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x15 :
@@ -3834,6 +3827,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x16 :
@@ -3853,6 +3847,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = default_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x17 :
@@ -3886,6 +3881,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = f17_prep_chip_selects; pvt->ops->determine_memory_type = f17_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = __read_mc_regs_df;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3925,6 +3921,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = f17_prep_chip_selects; pvt->ops->determine_memory_type = f17_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = __read_mc_regs_df;break ;default :
@@ -3935,7 +3932,8 @@ static int per_family_init(struct amd64_pvt *pvt)/* ops required for all the families */ if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects || - !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz) { + !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || + !pvt->ops->get_mc_regs) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
@@ -3972,7 +3970,16 @@ static int hw_info_get(struct amd64_pvt *pvt)if (ret)return ret; -read_mc_regs (pvt); + pvt->ops->get_mc_regs (pvt); + + pvt->ops->prep_chip_selects (pvt); + + pvt->ops->get_base_mask (pvt); + + pvt->ops->determine_memory_type (pvt); +edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]); + + pvt->ops->determine_ecc_sym_sz (pvt);return 0 ; }
drivers/edac/amd64_edac.h +1 -0
@@ -468,6 +468,7 @@ struct low_ops {void (*prep_chip_selects)(struct amd64_pvt *pvt);void (*determine_memory_type)(struct amd64_pvt *pvt);void (*determine_ecc_sym_sz)(struct amd64_pvt *pvt); +void (*get_mc_regs)(struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 06/14] EDAC/amd64: Add get_mc_regs() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
get_mc_regs()inpvt->opsand assign family specificget_mc_regs()definitions appropriately.
Please include the "why".
Quoted 27 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 77 +++++++++++++++++++++------------------ drivers/edac/amd64_edac.h | 1 + 2 files changed, 43 insertions(+), 35 deletions(-)drivers/edac/amd64_edac.c +9
-0@@ -3214,6 +3214,27 @@ static void f17_determine_ecc_sym_sz(struct amd64_pvt *pvt) } } +static void read_top_mem_registers (struct amd64_pvt *pvt) +{ +u64 msr_val; + +/* +* Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since +* those are Read-As-Zero. +*/ +rdmsrl (MSR_K8_TOP_MEM1 , pvt->top_mem);
drivers/edac/amd64_edac.c static void f17_determine_ecc_sym_sz(struct amd64_pvt *pvt) · line 3235
Quoted 10 lines
drivers/edac/amd64_edac.c +10
-0+edac_dbg (0 ," TOP_MEM: 0x%016llx\n" , pvt->top_mem); + +/* Check first whether TOP_MEM2 is enabled: */ +rdmsrl (MSR_AMD64_SYSCFG , msr_val); +if (msr_val &BIT (21 )) { +rdmsrl (MSR_K8_TOP_MEM2 , pvt->top_mem2); +edac_dbg (0 ," TOP_MEM2: 0x%016llx\n" , pvt->top_mem2); + }else { +edac_dbg (0 ," TOP_MEM2 disabled\n" ); + }
These two values are not used by any code within this module. They are only used in debug print statements and debug sysfs entries. I think this code should just be removed. An expert user who wants to know TOM and TOM2 can use another method, like msr-tools, rather than recompile a kernel with CONFIG_EDAC_DEBUG, etc.
drivers/edac/amd64_edac.c static void __read_mc_regs_df(struct amd64_pvt *pvt) · line 3260
Quoted 11 lines
drivers/edac/amd64_edac.c +4
-0+} +/* * Retrieve the hardware registers of the memory controller. */ @@ -3235,6 +3256,8 @@ static void __read_mc_regs_df(struct amd64_pvt *pvt)amd_smn_read (nid, umc_base +UMCCH_ECC_CTRL , &umc->ecc_ctrl);amd_smn_read (nid, umc_base +UMCCH_UMC_CAP_HI , &umc->umc_cap_hi); } + +amd64_read_pci_cfg (pvt->F0,DF_DHAR , &pvt->dhar);
"dhar" is not used by any code for Zen-based systems. I think this line can be dropped. Reading "dhar" should still be preserved for legacy systems.
This is also the only use of PCI F0. So all the F0 IDs can be removed too. I have a patch for this as part of some general code clean up. Let's include that with this set also. I think removing TOM/TOM2 code can be included too.
Quoted 53 lines
drivers/edac/amd64_edac.c +1
-33}/* @@ -3244,30 +3267,8 @@ static void __read_mc_regs_df(struct amd64_pvt *pvt)static void read_mc_regs (struct amd64_pvt *pvt) {unsigned int range; -u64 msr_val; -/* -* Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since -* those are Read-As-Zero. -*/ -rdmsrl (MSR_K8_TOP_MEM1 , pvt->top_mem); -edac_dbg (0 ," TOP_MEM: 0x%016llx\n" , pvt->top_mem); - -/* Check first whether TOP_MEM2 is enabled: */ -rdmsrl (MSR_AMD64_SYSCFG , msr_val); -if (msr_val &BIT (21 )) { -rdmsrl (MSR_K8_TOP_MEM2 , pvt->top_mem2); -edac_dbg (0 ," TOP_MEM2: 0x%016llx\n" , pvt->top_mem2); - }else { -edac_dbg (0 ," TOP_MEM2 disabled\n" ); - } - -if (pvt->umc) { -__read_mc_regs_df (pvt); -amd64_read_pci_cfg (pvt->F0,DF_DHAR , &pvt->dhar); - - goto skip; - } +read_top_mem_registers (pvt);amd64_read_pci_cfg (pvt->F3,NBCAP , &pvt->nbcap);@@ -3308,16 +3309,6 @@ static void read_mc_regs(struct amd64_pvt *pvt)amd64_read_dct_pci_cfg (pvt,1 ,DCLR0 , &pvt->dclr1);amd64_read_dct_pci_cfg (pvt,1 ,DCHR0 , &pvt->dchr1); } - -skip: - pvt->ops->prep_chip_selects (pvt); - - pvt->ops->get_base_mask (pvt); - - pvt->ops->determine_memory_type (pvt); -edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]); - - pvt->ops->determine_ecc_sym_sz (pvt); }/*
drivers/edac/amd64_edac.c static int per_family_init(struct amd64_pvt *pvt) · line 3786
Quoted 4 lines
drivers/edac/amd64_edac.c +1
-0@@ -3792,6 +3783,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = k8_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;
The function names should be more consistent: either both get or read.
The read_mc_regs() function is used for systems with DCTs (i.e. legacy). This can be included in the name.
Quoted 28 lines
drivers/edac/amd64_edac.c +3
-0break ;case 0x10 :@@ -3805,6 +3797,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = default_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x15 :@@ -3834,6 +3827,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x16 :@@ -3853,6 +3847,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = default_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x17 :
drivers/edac/amd64_edac.c static int per_family_init(struct amd64_pvt *pvt) · line 3884
Quoted 4 lines
drivers/edac/amd64_edac.c +1
-0@@ -3886,6 +3881,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = f17_prep_chip_selects; pvt->ops->determine_memory_type = f17_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = __read_mc_regs_df;
The underscore prefix can be removed, since this is no longer a helper function. Also, the "df" suffix can be removed when changing the name.
Maybe something like this:
pvt->ops->read_mc_regs() <--- This reads memory controller registers.
read_dct_regs() <--- Used for DRAM Controllers (DCTs).
read_umc_regs() <--- Used for Unified Memory Controllers (UMCs).
Quoted 24 lines
drivers/edac/amd64_edac.c +3
-1if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;@@ -3925,6 +3921,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = f17_prep_chip_selects; pvt->ops->determine_memory_type = f17_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = __read_mc_regs_df;break ;default :@@ -3935,7 +3932,8 @@ static int per_family_init(struct amd64_pvt *pvt)/* ops required for all the families */ if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects || - !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz) { + !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || + !pvt->ops->get_mc_regs) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }@@ -3972,7 +3970,16 @@ static int hw_info_get(struct amd64_pvt *pvt)if (ret)return ret;
drivers/edac/amd64_edac.c static int hw_info_get(struct amd64_pvt *pvt) · line 3980
Quoted 10 lines
drivers/edac/amd64_edac.c +8
-1-read_mc_regs (pvt); + pvt->ops->get_mc_regs (pvt); + + pvt->ops->prep_chip_selects (pvt); + + pvt->ops->get_base_mask (pvt); + + pvt->ops->determine_memory_type (pvt); +edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]);
This line should be included in determine_memory_type(). It should be called for each PVT on legacy systems and for each UMC on current systems.
Thanks,
Yazen
Re: [PATCH 06/14] EDAC/amd64: Add get_mc_regs() into pvt->ops
Hi Yazen,
Quoted 7 lines · Yazen Ghannam
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
get_mc_regs()inpvt->opsand assign family specificget_mc_regs()definitions appropriately.Please include the "why".
Sure
Quoted 35 lines
Quoted 35 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 77 +++++++++++++++++++++------------------ drivers/edac/amd64_edac.h | 1 + 2 files changed, 43 insertions(+), 35 deletions(-)drivers/edac/amd64_edac.c +16
-0@@ -3214,6 +3214,27 @@ static void f17_determine_ecc_sym_sz(struct amd64_pvt *pvt) } } +static void read_top_mem_registers (struct amd64_pvt *pvt) +{ +u64 msr_val; + +/* +* Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since +* those are Read-As-Zero. +*/ +rdmsrl (MSR_K8_TOP_MEM1 , pvt->top_mem); +edac_dbg (0 ," TOP_MEM: 0x%016llx\n" , pvt->top_mem); + +/* Check first whether TOP_MEM2 is enabled: */ +rdmsrl (MSR_AMD64_SYSCFG , msr_val); +if (msr_val &BIT (21 )) { +rdmsrl (MSR_K8_TOP_MEM2 , pvt->top_mem2); +edac_dbg (0 ," TOP_MEM2: 0x%016llx\n" , pvt->top_mem2);
Quoted 8 lines
drivers/edac/amd64_edac.c static void f17_determine_ecc_sym_sz(struct amd64_pvt *pvt) · line 3235
Quoted 3 lines
drivers/edac/amd64_edac.c +3
-0+ }else { +edac_dbg (0 ," TOP_MEM2 disabled\n" ); + }These two values are not used by any code within this module. They are only used in debug print statements and debug sysfs entries. I think this code should just be removed. An expert user who wants to know TOM and TOM2 can use another method, like msr-tools, rather than recompile a kernel with
CONFIG_EDAC_DEBUG, etc.
Make sense, do you think some users have developed scripts to parse the EDAC debug logs ?
Quoted 15 lines
drivers/edac/amd64_edac.c static void __read_mc_regs_df(struct amd64_pvt *pvt) · line 3260
Quoted 12 lines
drivers/edac/amd64_edac.c +4
-0+} +/* * Retrieve the hardware registers of the memory controller. */ @@ -3235,6 +3256,8 @@ static void __read_mc_regs_df(struct amd64_pvt *pvt)amd_smn_read (nid, umc_base +UMCCH_ECC_CTRL , &umc->ecc_ctrl);amd_smn_read (nid, umc_base +UMCCH_UMC_CAP_HI , &umc->umc_cap_hi); } + +amd64_read_pci_cfg (pvt->F0,DF_DHAR , &pvt->dhar);"dhar" is not used by any code for Zen-based systems. I think this line can be dropped. Reading "dhar" should still be preserved for legacy systems.
Quoted 3 lines
This is also the only use of PCI F0. So all the F0 IDs can be removed too. I have a patch for this as part of some general code clean up. Let's include that with this set also. I think removing TOM/TOM2 code can be included too.
Sure, we can work on this.
Quoted 60 lines
Quoted 54 lines
drivers/edac/amd64_edac.c +1
-33}/* @@ -3244,30 +3267,8 @@ static void __read_mc_regs_df(struct amd64_pvt *pvt)static void read_mc_regs (struct amd64_pvt *pvt) {unsigned int range; -u64 msr_val; -/* -* Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since -* those are Read-As-Zero. -*/ -rdmsrl (MSR_K8_TOP_MEM1 , pvt->top_mem); -edac_dbg (0 ," TOP_MEM: 0x%016llx\n" , pvt->top_mem); - -/* Check first whether TOP_MEM2 is enabled: */ -rdmsrl (MSR_AMD64_SYSCFG , msr_val); -if (msr_val &BIT (21 )) { -rdmsrl (MSR_K8_TOP_MEM2 , pvt->top_mem2); -edac_dbg (0 ," TOP_MEM2: 0x%016llx\n" , pvt->top_mem2); - }else { -edac_dbg (0 ," TOP_MEM2 disabled\n" ); - } - -if (pvt->umc) { -__read_mc_regs_df (pvt); -amd64_read_pci_cfg (pvt->F0,DF_DHAR , &pvt->dhar); - - goto skip; - } +read_top_mem_registers (pvt);amd64_read_pci_cfg (pvt->F3,NBCAP , &pvt->nbcap);@@ -3308,16 +3309,6 @@ static void read_mc_regs(struct amd64_pvt *pvt)amd64_read_dct_pci_cfg (pvt,1 ,DCLR0 , &pvt->dclr1);amd64_read_dct_pci_cfg (pvt,1 ,DCHR0 , &pvt->dchr1); } - -skip: - pvt->ops->prep_chip_selects (pvt); - - pvt->ops->get_base_mask (pvt); - - pvt->ops->determine_memory_type (pvt); -edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]); - - pvt->ops->determine_ecc_sym_sz (pvt); }/* drivers/edac/amd64_edac.c static int per_family_init(struct amd64_pvt *pvt) · line 3786
Quoted 4 lines
drivers/edac/amd64_edac.c +1
-0@@ -3792,6 +3783,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = k8_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;The function names should be more consistent: either both get or read.
Quoted 2 lines
The
read_mc_regs()function is used for systems with DCTs (i.e. legacy). This can be included in the name.
sure
Quoted 36 lines
Quoted 29 lines
drivers/edac/amd64_edac.c +3
-0break ;case 0x10 :@@ -3805,6 +3797,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = default_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x15 :@@ -3834,6 +3827,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_base_mask = read_dct_base_mask; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x16 :@@ -3853,6 +3847,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = default_prep_chip_selects; pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = read_mc_regs;break ;case 0x17 :drivers/edac/amd64_edac.c static int per_family_init(struct amd64_pvt *pvt) · line 3884
Quoted 4 lines
drivers/edac/amd64_edac.c +1
-0@@ -3886,6 +3881,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = f17_prep_chip_selects; pvt->ops->determine_memory_type = f17_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = __read_mc_regs_df;The underscore prefix can be removed, since this is no longer a helper function. Also, the "df" suffix can be removed when changing the name.
Quoted 7 lines
Maybe something like this:
pvt->ops->read_mc_regs()<--- This reads memory controller registers.
read_dct_regs()<--- Used for DRAM Controllers (DCTs).
read_umc_regs()<--- Used for Unified Memory Controllers (UMCs).
sure
Quoted 26 lines
Quoted 26 lines
drivers/edac/amd64_edac.c +3
-1if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;@@ -3925,6 +3921,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->prep_chip_selects = f17_prep_chip_selects; pvt->ops->determine_memory_type = f17_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; + pvt->ops->get_mc_regs = __read_mc_regs_df;break ;default :@@ -3935,7 +3932,8 @@ static int per_family_init(struct amd64_pvt *pvt)/* ops required for all the families */ if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects || - !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz) { + !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || + !pvt->ops->get_mc_regs) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }@@ -3972,7 +3970,16 @@ static int hw_info_get(struct amd64_pvt *pvt)if (ret)return ret;
Quoted 11 lines
drivers/edac/amd64_edac.c static int hw_info_get(struct amd64_pvt *pvt) · line 3980
Quoted 9 lines
drivers/edac/amd64_edac.c +8
-1-read_mc_regs (pvt); + pvt->ops->get_mc_regs (pvt); + + pvt->ops->prep_chip_selects (pvt); + + pvt->ops->get_base_mask (pvt); + + pvt->ops->determine_memory_type (pvt); +edac_dbg (1 ," DIMM type: %s\n" , edac_mem_types[pvt->dram_type]);This line should be included in
determine_memory_type(). It should be called for each PVT on legacy systems and for each UMC on current systems.
sure
Regards,
Naveenk
Quoted 3 lines
Thanks,
Yazen
Yazen Ghannam
maintainerRe: [PATCH 06/14] EDAC/amd64: Add get_mc_regs() into pvt->ops
On Thu, Mar 31, 2022 at 05:49:49PM +0530, Chatradhi, Naveen Krishna wrote:
...
Quoted 24 lines
Quoted 16 lines
Quoted 16 lines
drivers/edac/amd64_edac.c +16
-0+static void read_top_mem_registers (struct amd64_pvt *pvt) +{ +u64 msr_val; + +/* +* Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since +* those are Read-As-Zero. +*/ +rdmsrl (MSR_K8_TOP_MEM1 , pvt->top_mem); +edac_dbg (0 ," TOP_MEM: 0x%016llx\n" , pvt->top_mem); + +/* Check first whether TOP_MEM2 is enabled: */ +rdmsrl (MSR_AMD64_SYSCFG , msr_val); +if (msr_val &BIT (21 )) { +rdmsrl (MSR_K8_TOP_MEM2 , pvt->top_mem2); +edac_dbg (0 ," TOP_MEM2: 0x%016llx\n" , pvt->top_mem2);Quoted 8 lines
drivers/edac/amd64_edac.c static void f17_determine_ecc_sym_sz(struct amd64_pvt *pvt) · line 3235
Quoted 3 lines
drivers/edac/amd64_edac.c +3
-0+ }else { +edac_dbg (0 ," TOP_MEM2 disabled\n" ); + }These two values are not used by any code within this module. They are only used in debug print statements and debug sysfs entries. I think this code should just be removed. An expert user who wants to know TOM and TOM2 can use another method, like msr-tools, rather than recompile a kernel with
CONFIG_EDAC_DEBUG, etc.
Quoted 2 lines
Make sense, do you think some users have developed scripts to parse the EDAC debug logs ?
I'm not aware of any users of this. But this isn't a robust interface like an ABI.
Thanks,
Yazen
Borislav Petkov
maintainerRe: [PATCH 06/14] EDAC/amd64: Add get_mc_regs() into pvt->ops
Quoted 2 lines · Yazen Ghannam
I'm not aware of any users of this. But this isn't a robust interface like an ABI.
Yes, kernel printk message formatting is not an ABI.
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquettePATCH 7/14 EDAC/amd64: Add ecc_enabled() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for ecc_enabled() in pvt->ops and assign family specific ecc_enabled() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 77 ++++++++++++++++++++++++--------------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 48 insertions(+), 30 deletions(-)
drivers/edac/amd64_edac.c +47 -30
@@ -3649,49 +3649,60 @@ static void restore_ecc_error_reporting(struct ecc_settings *s, u16 nid,amd64_warn ("Error restoring NB MCGCTL settings!\n" ); } -static bool ecc_enabled (struct amd64_pvt *pvt) +static bool f1x_ecc_enabled (struct amd64_pvt *pvt) {u16 nid = pvt->mc_node_id;bool nb_mce_en = false; -u8 ecc_en =0 , i; +u8 ecc_en =0 ;u32 value; -if (boot_cpu_data.x86 >=0x17 ) { -u8 umc_en_mask =0 , ecc_en_mask =0 ; -struct amd64_umc *umc; +amd64_read_pci_cfg (pvt->F3,NBCFG , &value); -for_each_umc (i) { - umc = &pvt->umc[i]; + ecc_en = !!(value &NBCFG_ECC_ENABLE ); -/* Only check enabled UMCs. */ -if (!(umc->sdp_ctrl &UMC_SDP_INIT )) -continue ; + nb_mce_en =nb_mce_bank_enabled_on_node (nid); +if (!nb_mce_en) +edac_dbg (0 ,"NB MCE bank disabled, set MSR 0x%08x[4] on node %d to enable.\n" , +MSR_IA32_MCG_CTL , nid); - umc_en_mask |=BIT (i); +edac_dbg (3 ,"Node %d: DRAM ECC %s.\n" , nid, (ecc_en ?"enabled" :"disabled" )); -if (umc->umc_cap_hi &UMC_ECC_ENABLED ) - ecc_en_mask |=BIT (i); - } +if (!ecc_en || !nb_mce_en) +return false; +else +return true; +} -/* Check whether at least one UMC is enabled: */ -if (umc_en_mask) - ecc_en = umc_en_mask == ecc_en_mask; -else -edac_dbg (0 ,"Node %d: No enabled UMCs.\n" , nid); +static bool f17_ecc_enabled (struct amd64_pvt *pvt) +{ +u8 umc_en_mask =0 , ecc_en_mask =0 ; +u8 ecc_en =0 , i; +u16 nid = pvt->mc_node_id; +bool nb_mce_en = false; +struct amd64_umc *umc; -/* Assume UMC MCA banks are enabled. */ - nb_mce_en = true; - }else { -amd64_read_pci_cfg (pvt->F3,NBCFG , &value); +for_each_umc (i) { + umc = &pvt->umc[i]; + +/* Only check enabled UMCs. */ +if (!(umc->sdp_ctrl &UMC_SDP_INIT )) +continue ; - ecc_en = !!(value &NBCFG_ECC_ENABLE ); + umc_en_mask |=BIT (i); - nb_mce_en =nb_mce_bank_enabled_on_node (nid); -if (!nb_mce_en) -edac_dbg (0 ,"NB MCE bank disabled, set MSR 0x%08x[4] on node %d to enable.\n" , -MSR_IA32_MCG_CTL , nid); +if (umc->umc_cap_hi &UMC_ECC_ENABLED ) + ecc_en_mask |=BIT (i); } +/* Check whether at least one UMC is enabled: */ +if (umc_en_mask) + ecc_en = umc_en_mask == ecc_en_mask; +else +edac_dbg (0 ,"Node %d: No enabled UMCs.\n" , nid); + +/* Assume UMC MCA banks are enabled. */ + nb_mce_en = true; +edac_dbg (3 ,"Node %d: DRAM ECC %s.\n" , nid, (ecc_en ?"enabled" :"disabled" ));if (!ecc_en || !nb_mce_en)
@@ -3784,6 +3795,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; pvt->ops->get_mc_regs = read_mc_regs; + pvt->ops->ecc_enabled = f1x_ecc_enabled;break ;case 0x10 :
@@ -3798,6 +3810,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; pvt->ops->get_mc_regs = read_mc_regs; + pvt->ops->ecc_enabled = f1x_ecc_enabled;break ;case 0x15 :
@@ -3828,6 +3841,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; pvt->ops->get_mc_regs = read_mc_regs; + pvt->ops->ecc_enabled = f1x_ecc_enabled;break ;case 0x16 :
@@ -3848,6 +3862,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_memory_type = f1x_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; pvt->ops->get_mc_regs = read_mc_regs; + pvt->ops->ecc_enabled = f1x_ecc_enabled;break ;case 0x17 :
@@ -3882,6 +3897,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_memory_type = f17_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; pvt->ops->get_mc_regs = __read_mc_regs_df; + pvt->ops->ecc_enabled = f17_ecc_enabled;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3922,6 +3938,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_memory_type = f17_determine_memory_type; pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; pvt->ops->get_mc_regs = __read_mc_regs_df; + pvt->ops->ecc_enabled = f17_ecc_enabled;break ;default :
@@ -3933,7 +3950,7 @@ static int per_family_init(struct amd64_pvt *pvt)if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects || !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || - !pvt->ops->get_mc_regs) { + !pvt->ops->get_mc_regs || !pvt->ops->ecc_enabled) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
@@ -4095,7 +4112,7 @@ static int probe_one_instance(unsigned int nid) goto err_enable; } -if (!ecc_enabled (pvt)) { +if (!pvt->ops->ecc_enabled (pvt)) { ret = -ENODEV ;if (!ecc_enable_override)
drivers/edac/amd64_edac.h +1 -0
@@ -469,6 +469,7 @@ struct low_ops {void (*determine_memory_type)(struct amd64_pvt *pvt);void (*determine_ecc_sym_sz)(struct amd64_pvt *pvt);void (*get_mc_regs)(struct amd64_pvt *pvt); +bool (*ecc_enabled)(struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 07/14] EDAC/amd64: Add ecc_enabled() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
ecc_enabled()inpvt->opsand assign family specificecc_enabled()definitions appropriately.
Please include the "why".
Quoted 55 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 77 ++++++++++++++++++++++++--------------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 48 insertions(+), 30 deletions(-)drivers/edac/amd64_edac.c +14
-14@@ -3649,49 +3649,60 @@ static void restore_ecc_error_reporting(struct ecc_settings *s, u16 nid,amd64_warn ("Error restoring NB MCGCTL settings!\n" ); } -static bool ecc_enabled (struct amd64_pvt *pvt) +static bool f1x_ecc_enabled (struct amd64_pvt *pvt) {u16 nid = pvt->mc_node_id;bool nb_mce_en = false; -u8 ecc_en =0 , i; +u8 ecc_en =0 ;u32 value; -if (boot_cpu_data.x86 >=0x17 ) { -u8 umc_en_mask =0 , ecc_en_mask =0 ; -struct amd64_umc *umc; +amd64_read_pci_cfg (pvt->F3,NBCFG , &value); -for_each_umc (i) { - umc = &pvt->umc[i]; + ecc_en = !!(value &NBCFG_ECC_ENABLE ); -/* Only check enabled UMCs. */ -if (!(umc->sdp_ctrl &UMC_SDP_INIT )) -continue ; + nb_mce_en =nb_mce_bank_enabled_on_node (nid); +if (!nb_mce_en) +edac_dbg (0 ,"NB MCE bank disabled, set MSR 0x%08x[4] on node %d to enable.\n" , +MSR_IA32_MCG_CTL , nid); - umc_en_mask |=BIT (i); +edac_dbg (3 ,"Node %d: DRAM ECC %s.\n" , nid, (ecc_en ?"enabled" :"disabled" )); -if (umc->umc_cap_hi &UMC_ECC_ENABLED ) - ecc_en_mask |=BIT (i); - } +if (!ecc_en || !nb_mce_en) +return false; +else +return true; +}
drivers/edac/amd64_edac.c static void restore_ecc_error_reporting(struct ecc_settings *s, u16 nid, · line 3679
Quoted 10 lines
drivers/edac/amd64_edac.c +4
-5-/* Check whether at least one UMC is enabled: */ -if (umc_en_mask) - ecc_en = umc_en_mask == ecc_en_mask; -else -edac_dbg (0 ,"Node %d: No enabled UMCs.\n" , nid); +static bool f17_ecc_enabled (struct amd64_pvt *pvt) +{ +u8 umc_en_mask =0 , ecc_en_mask =0 ; +u8 ecc_en =0 , i;
This line should go at the end to keep the longest->shortest line style.
Quoted 25 lines
drivers/edac/amd64_edac.c +12
-9+u16 nid = pvt->mc_node_id; +bool nb_mce_en = false; +struct amd64_umc *umc; -/* Assume UMC MCA banks are enabled. */ - nb_mce_en = true; - }else { -amd64_read_pci_cfg (pvt->F3,NBCFG , &value); +for_each_umc (i) { + umc = &pvt->umc[i]; + +/* Only check enabled UMCs. */ +if (!(umc->sdp_ctrl &UMC_SDP_INIT )) +continue ; - ecc_en = !!(value &NBCFG_ECC_ENABLE ); + umc_en_mask |=BIT (i); - nb_mce_en =nb_mce_bank_enabled_on_node (nid); -if (!nb_mce_en) -edac_dbg (0 ,"NB MCE bank disabled, set MSR 0x%08x[4] on node %d to enable.\n" , -MSR_IA32_MCG_CTL , nid); +if (umc->umc_cap_hi &UMC_ECC_ENABLED ) + ecc_en_mask |=BIT (i); }
drivers/edac/amd64_edac.c static void restore_ecc_error_reporting(struct ecc_settings *s, u16 nid, · line 3705
Quoted 10 lines
drivers/edac/amd64_edac.c +9
-0+/* Check whether at least one UMC is enabled: */ +if (umc_en_mask) + ecc_en = umc_en_mask == ecc_en_mask; +else +edac_dbg (0 ,"Node %d: No enabled UMCs.\n" , nid); + +/* Assume UMC MCA banks are enabled. */ + nb_mce_en = true; +
The nb_mce_en variable can be dropped since this is now a separate function.
Thanks,
Yazen
PATCH 8/14 EDAC/amd64: Add determine_edac_cap() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for determine_edac_cap() in pvt->ops and assign family specific determine_edac_cap() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 37 ++++++++++++++++++++++++------------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 25 insertions(+), 13 deletions(-)
drivers/edac/amd64_edac.c +24 -13
@@ -1267,13 +1267,25 @@ static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16);* Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs * are ECC capable. */ -static unsigned long determine_edac_cap (struct amd64_pvt *pvt) +static unsigned long f1x_determine_edac_cap (struct amd64_pvt *pvt) {unsigned long edac_cap =EDAC_FLAG_NONE ;u8 bit; -if (pvt->umc) { -u8 i, umc_en_mask =0 , dimm_ecc_en_mask =0 ; + bit = (pvt->fam >0xf || pvt->ext_model >=K8_REV_F ) + ?19 + :17 ; + +if (pvt->dclr0 &BIT (bit)) + edac_cap =EDAC_FLAG_SECDED ; + +return edac_cap; +} + +static unsigned long f17_determine_edac_cap (struct amd64_pvt *pvt) +{ +u8 i, umc_en_mask =0 , dimm_ecc_en_mask =0 ; +unsigned long edac_cap =EDAC_FLAG_NONE ;for_each_umc (i) {if (!(pvt->umc[i].sdp_ctrl &UMC_SDP_INIT ))
@@ -1288,14 +1300,6 @@ static unsigned long determine_edac_cap(struct amd64_pvt *pvt)if (umc_en_mask == dimm_ecc_en_mask) edac_cap =EDAC_FLAG_SECDED ; - }else { - bit = (pvt->fam >0xf || pvt->ext_model >=K8_REV_F ) - ?19 - :17 ; - -if (pvt->dclr0 &BIT (bit)) - edac_cap =EDAC_FLAG_SECDED ; - }return edac_cap; }
@@ -3759,7 +3763,7 @@ static void setup_mci_misc_attrs(struct mem_ctl_info *mci) mci->edac_ctl_cap |=EDAC_FLAG_S4ECD4ED ; } - mci->edac_cap =determine_edac_cap (pvt); + mci->edac_cap = pvt->ops->determine_edac_cap (pvt); mci->mod_name =EDAC_MOD_STR ; mci->ctl_name = pvt->ctl_name; mci->dev_name =pci_name (pvt->F3);
@@ -3796,6 +3800,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; pvt->ops->get_mc_regs = read_mc_regs; pvt->ops->ecc_enabled = f1x_ecc_enabled; + pvt->ops->determine_edac_cap = f1x_determine_edac_cap;break ;case 0x10 :
@@ -3811,6 +3816,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; pvt->ops->get_mc_regs = read_mc_regs; pvt->ops->ecc_enabled = f1x_ecc_enabled; + pvt->ops->determine_edac_cap = f1x_determine_edac_cap;break ;case 0x15 :
@@ -3842,6 +3848,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; pvt->ops->get_mc_regs = read_mc_regs; pvt->ops->ecc_enabled = f1x_ecc_enabled; + pvt->ops->determine_edac_cap = f1x_determine_edac_cap;break ;case 0x16 :
@@ -3863,6 +3870,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_ecc_sym_sz = f1x_determine_ecc_sym_sz; pvt->ops->get_mc_regs = read_mc_regs; pvt->ops->ecc_enabled = f1x_ecc_enabled; + pvt->ops->determine_edac_cap = f1x_determine_edac_cap;break ;case 0x17 :
@@ -3898,6 +3906,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; pvt->ops->get_mc_regs = __read_mc_regs_df; pvt->ops->ecc_enabled = f17_ecc_enabled; + pvt->ops->determine_edac_cap = f17_determine_edac_cap;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3939,6 +3948,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_ecc_sym_sz = f17_determine_ecc_sym_sz; pvt->ops->get_mc_regs = __read_mc_regs_df; pvt->ops->ecc_enabled = f17_ecc_enabled; + pvt->ops->determine_edac_cap = f17_determine_edac_cap;break ;default :
@@ -3950,7 +3960,8 @@ static int per_family_init(struct amd64_pvt *pvt)if (!pvt->ops->early_channel_count || !pvt->ops->dbam_to_cs || !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects || !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || - !pvt->ops->get_mc_regs || !pvt->ops->ecc_enabled) { + !pvt->ops->get_mc_regs || !pvt->ops->ecc_enabled || + !pvt->ops->determine_edac_cap) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
drivers/edac/amd64_edac.h +1 -0
@@ -470,6 +470,7 @@ struct low_ops {void (*determine_ecc_sym_sz)(struct amd64_pvt *pvt);void (*get_mc_regs)(struct amd64_pvt *pvt);bool (*ecc_enabled)(struct amd64_pvt *pvt); +unsigned long (*determine_edac_cap)(struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 08/14] EDAC/amd64: Add determine_edac_cap() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
determine_edac_cap()inpvt->opsand assign family specificdetermine_edac_cap()definitions appropriately.
Please include the "why".
Quoted 59 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 37 ++++++++++++++++++++++++------------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 25 insertions(+), 13 deletions(-)drivers/edac/amd64_edac.c +15
-11@@ -1267,13 +1267,25 @@ static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16);* Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs * are ECC capable. */ -static unsigned long determine_edac_cap (struct amd64_pvt *pvt) +static unsigned long f1x_determine_edac_cap (struct amd64_pvt *pvt) {unsigned long edac_cap =EDAC_FLAG_NONE ;u8 bit; -if (pvt->umc) { -u8 i, umc_en_mask =0 , dimm_ecc_en_mask =0 ; + bit = (pvt->fam >0xf || pvt->ext_model >=K8_REV_F ) + ?19 + :17 ; + +if (pvt->dclr0 &BIT (bit)) + edac_cap =EDAC_FLAG_SECDED ; + +return edac_cap; +} + +static unsigned long f17_determine_edac_cap (struct amd64_pvt *pvt) +{ +u8 i, umc_en_mask =0 , dimm_ecc_en_mask =0 ; +unsigned long edac_cap =EDAC_FLAG_NONE ;for_each_umc (i) {if (!(pvt->umc[i].sdp_ctrl &UMC_SDP_INIT ))@@ -1288,14 +1300,6 @@ static unsigned long determine_edac_cap(struct amd64_pvt *pvt)if (umc_en_mask == dimm_ecc_en_mask) edac_cap =EDAC_FLAG_SECDED ; - }else { - bit = (pvt->fam >0xf || pvt->ext_model >=K8_REV_F ) - ?19 - :17 ; - -if (pvt->dclr0 &BIT (bit)) - edac_cap =EDAC_FLAG_SECDED ; - }return edac_cap; }
drivers/edac/amd64_edac.c static void setup_mci_misc_attrs(struct mem_ctl_info *mci) · line 3763
Quoted 1 line
drivers/edac/amd64_edac.c +0
-0@@ -3759,7 +3763,7 @@ static void setup_mci_misc_attrs(struct mem_ctl_info *mci) mci->edac_ctl_cap |=EDAC_FLAG_S4ECD4ED ;
This patch is okay overall. But I think we should audit which EDAC_FLAG values are used to make sure they truly match the system capabilities.
Thanks,
Yazen
PATCH 9/14 EDAC/amd64: Add determine_edac_ctl_cap() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for determine_edac_ctl_cap() in pvt->ops and assign family specific determine_edac_ctl_cap() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 30 +++++++++++++++++++----------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 20 insertions(+), 11 deletions(-)
drivers/edac/amd64_edac.c +19 -11
@@ -3716,7 +3716,17 @@ static bool f17_ecc_enabled(struct amd64_pvt *pvt) }static inline void -f17h_determine_edac_ctl_cap (struct mem_ctl_info *mci,struct amd64_pvt *pvt) +f1x_determine_edac_ctl_cap (struct mem_ctl_info *mci,struct amd64_pvt *pvt) +{ +if (pvt->nbcap &NBCAP_SECDED ) + mci->edac_ctl_cap |=EDAC_FLAG_SECDED ; + +if (pvt->nbcap &NBCAP_CHIPKILL ) + mci->edac_ctl_cap |=EDAC_FLAG_S4ECD4ED ; +} + +static inline void +f17_determine_edac_ctl_cap (struct mem_ctl_info *mci,struct amd64_pvt *pvt) {u8 i, ecc_en =1 , cpk_en =1 , dev_x4 =1 , dev_x16 =1 ;
@@ -3753,15 +3763,7 @@ static void setup_mci_misc_attrs(struct mem_ctl_info *mci) mci->mtype_cap =MEM_FLAG_DDR2 |MEM_FLAG_RDDR2 ; mci->edac_ctl_cap =EDAC_FLAG_NONE ; -if (pvt->umc) { -f17h_determine_edac_ctl_cap (mci, pvt); - }else { -if (pvt->nbcap &NBCAP_SECDED ) - mci->edac_ctl_cap |=EDAC_FLAG_SECDED ; - -if (pvt->nbcap &NBCAP_CHIPKILL ) - mci->edac_ctl_cap |=EDAC_FLAG_S4ECD4ED ; - } + pvt->ops->determine_edac_ctl_cap (mci, pvt); mci->edac_cap = pvt->ops->determine_edac_cap (pvt); mci->mod_name =EDAC_MOD_STR ;
@@ -3801,6 +3803,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_mc_regs = read_mc_regs; pvt->ops->ecc_enabled = f1x_ecc_enabled; pvt->ops->determine_edac_cap = f1x_determine_edac_cap; + pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap;break ;case 0x10 :
@@ -3817,6 +3820,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_mc_regs = read_mc_regs; pvt->ops->ecc_enabled = f1x_ecc_enabled; pvt->ops->determine_edac_cap = f1x_determine_edac_cap; + pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap;break ;case 0x15 :
@@ -3849,6 +3853,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_mc_regs = read_mc_regs; pvt->ops->ecc_enabled = f1x_ecc_enabled; pvt->ops->determine_edac_cap = f1x_determine_edac_cap; + pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap;break ;case 0x16 :
@@ -3871,6 +3876,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_mc_regs = read_mc_regs; pvt->ops->ecc_enabled = f1x_ecc_enabled; pvt->ops->determine_edac_cap = f1x_determine_edac_cap; + pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap;break ;case 0x17 :
@@ -3907,6 +3913,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_mc_regs = __read_mc_regs_df; pvt->ops->ecc_enabled = f17_ecc_enabled; pvt->ops->determine_edac_cap = f17_determine_edac_cap; + pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3949,6 +3956,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->get_mc_regs = __read_mc_regs_df; pvt->ops->ecc_enabled = f17_ecc_enabled; pvt->ops->determine_edac_cap = f17_determine_edac_cap; + pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap;break ;default :
@@ -3961,7 +3969,7 @@ static int per_family_init(struct amd64_pvt *pvt) !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects || !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || !pvt->ops->get_mc_regs || !pvt->ops->ecc_enabled || - !pvt->ops->determine_edac_cap) { + !pvt->ops->determine_edac_cap || !pvt->ops->determine_edac_ctl_cap) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
drivers/edac/amd64_edac.h +1 -0
@@ -471,6 +471,7 @@ struct low_ops {void (*get_mc_regs)(struct amd64_pvt *pvt);bool (*ecc_enabled)(struct amd64_pvt *pvt);unsigned long (*determine_edac_cap)(struct amd64_pvt *pvt); +void (*determine_edac_ctl_cap)(struct mem_ctl_info *mci,struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 09/14] EDAC/amd64: Add determine_edac_ctl_cap() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
determine_edac_ctl_cap()inpvt->opsand assign family specificdetermine_edac_ctl_cap()definitions appropriately.
Please include the "why".
And like the previous patch, this looks okay overall but we should verify the EDAC_FLAGs.
Thanks,
Yazen
PATCH 10/14 EDAC/amd64: Add setup_mci_misc_sttrs() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for setup_mci_misc_sttrs() in pvt->ops and assign family specific setup_mci_misc_sttrs() definitions appropriately
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 13 ++++++++++--- drivers/edac/amd64_edac.h | 1 + 2 files changed, 11 insertions(+), 3 deletions(-)
drivers/edac/amd64_edac.c +10 -3
@@ -3756,7 +3756,7 @@ f17_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt) } } -static void setup_mci_misc_attrs (struct mem_ctl_info *mci) +static void f1x_setup_mci_misc_attrs (struct mem_ctl_info *mci) {struct amd64_pvt *pvt = mci->pvt_info;
@@ -3804,6 +3804,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->ecc_enabled = f1x_ecc_enabled; pvt->ops->determine_edac_cap = f1x_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; + pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs;break ;case 0x10 :
@@ -3821,6 +3822,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->ecc_enabled = f1x_ecc_enabled; pvt->ops->determine_edac_cap = f1x_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; + pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs;break ;case 0x15 :
@@ -3854,6 +3856,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->ecc_enabled = f1x_ecc_enabled; pvt->ops->determine_edac_cap = f1x_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; + pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs;break ;case 0x16 :
@@ -3877,6 +3880,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->ecc_enabled = f1x_ecc_enabled; pvt->ops->determine_edac_cap = f1x_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; + pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs;break ;case 0x17 :
@@ -3914,6 +3918,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->ecc_enabled = f17_ecc_enabled; pvt->ops->determine_edac_cap = f17_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap; + pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3957,6 +3962,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->ecc_enabled = f17_ecc_enabled; pvt->ops->determine_edac_cap = f17_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap; + pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs;break ;default :
@@ -3969,7 +3975,8 @@ static int per_family_init(struct amd64_pvt *pvt) !pvt->ops->get_base_mask || !pvt->ops->prep_chip_selects || !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || !pvt->ops->get_mc_regs || !pvt->ops->ecc_enabled || - !pvt->ops->determine_edac_cap || !pvt->ops->determine_edac_ctl_cap) { + !pvt->ops->determine_edac_cap || !pvt->ops->determine_edac_ctl_cap || + !pvt->ops->setup_mci_misc_attrs) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
@@ -4064,7 +4071,7 @@ static int init_one_instance(struct amd64_pvt *pvt) mci->pvt_info = pvt; mci->pdev = &pvt->F3->dev; -setup_mci_misc_attrs (mci); + pvt->ops->setup_mci_misc_attrs (mci);if (init_csrows (mci)) mci->edac_cap =EDAC_FLAG_NONE ;
drivers/edac/amd64_edac.h +1 -0
@@ -472,6 +472,7 @@ struct low_ops {bool (*ecc_enabled)(struct amd64_pvt *pvt);unsigned long (*determine_edac_cap)(struct amd64_pvt *pvt);void (*determine_edac_ctl_cap)(struct mem_ctl_info *mci,struct amd64_pvt *pvt); +void (*setup_mci_misc_attrs)(struct mem_ctl_info *mci); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 10/14] EDAC/amd64: Add setup_mci_misc_sttrs() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
setup_mci_misc_sttrs()inpvt->opsand assign family specificsetup_mci_misc_sttrs()definitions appropriately
Please include the "why".
Quoted 15 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 13 ++++++++++--- drivers/edac/amd64_edac.h | 1 + 2 files changed, 11 insertions(+), 3 deletions(-)drivers/edac/amd64_edac.c +0
-0
drivers/edac/amd64_edac.c f17_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt) · line 3759
Quoted 5 lines
drivers/edac/amd64_edac.c +1
-1@@ -3756,7 +3756,7 @@ f17_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt) } } -static void setup_mci_misc_attrs (struct mem_ctl_info *mci) +static void f1x_setup_mci_misc_attrs (struct mem_ctl_info *mci)
The MEM_FLAG values aren't correct in this function. I'd like to say we can just not set mtype_cap since it's only used in a single debug print statement. But that's in edac_mc, so maybe some users expect it?
Thanks,
Yazen
PATCH 11/14 EDAC/amd64: Add populate_csrows() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for populate_csrows() in pvt->ops and assign family specific populate_csrows() definitions appropriately
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 13 ++++++++----- drivers/edac/amd64_edac.h | 1 + 2 files changed, 9 insertions(+), 5 deletions(-)
drivers/edac/amd64_edac.c +8 -5
@@ -3430,9 +3430,6 @@ static int init_csrows(struct mem_ctl_info *mci)int nr_pages =0 ;u32 val; -if (pvt->umc) -return init_csrows_df (mci); -amd64_read_pci_cfg (pvt->F3,NBCFG , &val); pvt->nbcfg = val;
@@ -3805,6 +3802,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_cap = f1x_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; + pvt->ops->populate_csrows = init_csrows;break ;case 0x10 :
@@ -3823,6 +3821,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_cap = f1x_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; + pvt->ops->populate_csrows = init_csrows;break ;case 0x15 :
@@ -3857,6 +3856,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_cap = f1x_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; + pvt->ops->populate_csrows = init_csrows;break ;case 0x16 :
@@ -3881,6 +3881,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_cap = f1x_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; + pvt->ops->populate_csrows = init_csrows;break ;case 0x17 :
@@ -3919,6 +3920,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_cap = f17_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; + pvt->ops->populate_csrows = init_csrows_df;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3963,6 +3965,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_cap = f17_determine_edac_cap; pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; + pvt->ops->populate_csrows = init_csrows_df;break ;default :
@@ -3976,7 +3979,7 @@ static int per_family_init(struct amd64_pvt *pvt) !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || !pvt->ops->get_mc_regs || !pvt->ops->ecc_enabled || !pvt->ops->determine_edac_cap || !pvt->ops->determine_edac_ctl_cap || - !pvt->ops->setup_mci_misc_attrs) { + !pvt->ops->setup_mci_misc_attrs || !pvt->ops->populate_csrows) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
@@ -4073,7 +4076,7 @@ static int init_one_instance(struct amd64_pvt *pvt) pvt->ops->setup_mci_misc_attrs (mci); -if (init_csrows (mci)) +if (pvt->ops->populate_csrows (mci)) mci->edac_cap =EDAC_FLAG_NONE ; ret = -ENODEV ;
drivers/edac/amd64_edac.h +1 -0
@@ -473,6 +473,7 @@ struct low_ops {unsigned long (*determine_edac_cap)(struct amd64_pvt *pvt);void (*determine_edac_ctl_cap)(struct mem_ctl_info *mci,struct amd64_pvt *pvt);void (*setup_mci_misc_attrs)(struct mem_ctl_info *mci); +int (*populate_csrows)(struct mem_ctl_info *mci); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 11/14] EDAC/amd64: Add populate_csrows() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
populate_csrows()inpvt->opsand assign family specificpopulate_csrows()definitions appropriately
Please include the "why", but otherwise looks okay.
Thanks,
Yazen
PATCH 12/14 EDAC/amd64: Add dump_misc_regs() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for dump_misc_regs() in pvt->ops and assign family specific dump_misc_regs() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 25 ++++++++++++++----------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 15 insertions(+), 11 deletions(-)
drivers/edac/amd64_edac.c +14 -11
@@ -1442,6 +1442,10 @@ static void __dump_misc_regs_df(struct amd64_pvt *pvt)edac_dbg (1 ,"F0x104 (DRAM Hole Address): 0x%08x, base: 0x%08x\n" , pvt->dhar,dhar_base (pvt)); + +edac_dbg (1 ," DramHoleValid: %s\n" ,dhar_valid (pvt) ?"yes" :"no" ); + +amd64_info ("using x%u syndromes.\n" , pvt->ecc_sym_sz); }/* Display and decode various NB registers for debug purposes. */
@@ -1476,15 +1480,6 @@ static void __dump_misc_regs(struct amd64_pvt *pvt)/* Only if NOT ganged does dclr1 have valid info */ if (!dct_ganging_enabled (pvt))debug_dump_dramcfg_low (pvt, pvt->dclr1,1 ); -} - -/* Display and decode various NB registers for debug purposes. */ -static void dump_misc_regs (struct amd64_pvt *pvt) -{ -if (pvt->umc) -__dump_misc_regs_df (pvt); -else -__dump_misc_regs (pvt);edac_dbg (1 ," DramHoleValid: %s\n" ,dhar_valid (pvt) ?"yes" :"no" );
@@ -3803,6 +3798,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; + pvt->ops->dump_misc_regs = __dump_misc_regs;break ;case 0x10 :
@@ -3822,6 +3818,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; + pvt->ops->dump_misc_regs = __dump_misc_regs;break ;case 0x15 :
@@ -3857,6 +3854,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; + pvt->ops->dump_misc_regs = __dump_misc_regs;break ;case 0x16 :
@@ -3882,6 +3880,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; + pvt->ops->dump_misc_regs = __dump_misc_regs;break ;case 0x17 :
@@ -3921,6 +3920,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows_df; + pvt->ops->dump_misc_regs = __dump_misc_regs_df;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3966,6 +3966,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows_df; + pvt->ops->dump_misc_regs = __dump_misc_regs_df;break ;default :
@@ -3979,7 +3980,8 @@ static int per_family_init(struct amd64_pvt *pvt) !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || !pvt->ops->get_mc_regs || !pvt->ops->ecc_enabled || !pvt->ops->determine_edac_cap || !pvt->ops->determine_edac_ctl_cap || - !pvt->ops->setup_mci_misc_attrs || !pvt->ops->populate_csrows) { + !pvt->ops->setup_mci_misc_attrs || !pvt->ops->populate_csrows || + !pvt->ops->dump_misc_regs) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
@@ -4169,7 +4171,8 @@ static int probe_one_instance(unsigned int nid)amd64_info ("%s detected (node %d).\n" , pvt->ctl_name, pvt->mc_node_id); -dump_misc_regs (pvt); +/* Display and decode various NB registers for debug purposes. */ + pvt->ops->dump_misc_regs (pvt);return ret;
drivers/edac/amd64_edac.h +1 -0
@@ -474,6 +474,7 @@ struct low_ops {void (*determine_edac_ctl_cap)(struct mem_ctl_info *mci,struct amd64_pvt *pvt);void (*setup_mci_misc_attrs)(struct mem_ctl_info *mci);int (*populate_csrows)(struct mem_ctl_info *mci); +void (*dump_misc_regs)(struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 12/14] EDAC/amd64: Add dump_misc_regs() into pvt->ops
Quoted 4 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
dump_misc_regs()inpvt->opsand assign family specificdump_misc_regs()definitions appropriately.
Please include the "why".
Quoted 16 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 25 ++++++++++++++----------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 15 insertions(+), 11 deletions(-)drivers/edac/amd64_edac.c +0
-0
drivers/edac/amd64_edac.c static void __dump_misc_regs_df(struct amd64_pvt *pvt) · line 1447
Quoted 6 lines
drivers/edac/amd64_edac.c +3
-0@@ -1442,6 +1442,10 @@ static void __dump_misc_regs_df(struct amd64_pvt *pvt)edac_dbg (1 ,"F0x104 (DRAM Hole Address): 0x%08x, base: 0x%08x\n" , pvt->dhar,dhar_base (pvt)); + +edac_dbg (1 ," DramHoleValid: %s\n" ,dhar_valid (pvt) ?"yes" :"no" ); +
This line can be dropped when dhar is removed for current systems.
drivers/edac/amd64_edac.c static void __dump_misc_regs_df(struct amd64_pvt *pvt) · line 1448
Quoted 1 line
drivers/edac/amd64_edac.c +1
-0+amd64_info ("using x%u syndromes.\n" , pvt->ecc_sym_sz);
This line can be dropped if we decide that symbol size isn't needed on current systems. We should double check if it's needed when determining "edac_mode".
If we keep it, then it should be printed at the end of the function where we read the symbol size.
Quoted 60 lines
drivers/edac/amd64_edac.c +5
-9}/* Display and decode various NB registers for debug purposes. */ @@ -1476,15 +1480,6 @@ static void __dump_misc_regs(struct amd64_pvt *pvt)/* Only if NOT ganged does dclr1 have valid info */ if (!dct_ganging_enabled (pvt))debug_dump_dramcfg_low (pvt, pvt->dclr1,1 ); -} - -/* Display and decode various NB registers for debug purposes. */ -static void dump_misc_regs (struct amd64_pvt *pvt) -{ -if (pvt->umc) -__dump_misc_regs_df (pvt); -else -__dump_misc_regs (pvt);edac_dbg (1 ," DramHoleValid: %s\n" ,dhar_valid (pvt) ?"yes" :"no" );@@ -3803,6 +3798,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; + pvt->ops->dump_misc_regs = __dump_misc_regs;break ;case 0x10 :@@ -3822,6 +3818,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; + pvt->ops->dump_misc_regs = __dump_misc_regs;break ;case 0x15 :@@ -3857,6 +3854,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; + pvt->ops->dump_misc_regs = __dump_misc_regs;break ;case 0x16 :@@ -3882,6 +3880,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f1x_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; + pvt->ops->dump_misc_regs = __dump_misc_regs;break ;case 0x17 :@@ -3921,6 +3920,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows_df; + pvt->ops->dump_misc_regs = __dump_misc_regs_df;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
drivers/edac/amd64_edac.c static int per_family_init(struct amd64_pvt *pvt) · line 3969
Quoted 4 lines
drivers/edac/amd64_edac.c +1
-0@@ -3966,6 +3966,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->determine_edac_ctl_cap = f17_determine_edac_ctl_cap; pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows_df; + pvt->ops->dump_misc_regs = __dump_misc_regs_df;
I think the underscore prefixes can be dropped.
Quoted 14 lines
drivers/edac/amd64_edac.c +2
-1break ;default :@@ -3979,7 +3980,8 @@ static int per_family_init(struct amd64_pvt *pvt) !pvt->ops->determine_memory_type || !pvt->ops->determine_ecc_sym_sz || !pvt->ops->get_mc_regs || !pvt->ops->ecc_enabled || !pvt->ops->determine_edac_cap || !pvt->ops->determine_edac_ctl_cap || - !pvt->ops->setup_mci_misc_attrs || !pvt->ops->populate_csrows) { + !pvt->ops->setup_mci_misc_attrs || !pvt->ops->populate_csrows || + !pvt->ops->dump_misc_regs) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
drivers/edac/amd64_edac.c static int probe_one_instance(unsigned int nid) · line 4174
Quoted 5 lines
drivers/edac/amd64_edac.c +1
-1@@ -4169,7 +4171,8 @@ static int probe_one_instance(unsigned int nid)amd64_info ("%s detected (node %d).\n" , pvt->ctl_name, pvt->mc_node_id); -dump_misc_regs (pvt); +/* Display and decode various NB registers for debug purposes. */
Please drop "NB" from the comment since other registers can also be printed.
Thanks,
Yazen
PATCH 13/14 EDAC/amd64: Add get_cs_mode() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for get_cs_mode() in pvt->ops and assign family specific get_cs_mode() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 23 +++++++++++++++-------- drivers/edac/amd64_edac.h | 1 + 2 files changed, 16 insertions(+), 8 deletions(-)
drivers/edac/amd64_edac.c +15 -8
@@ -1347,6 +1347,13 @@ static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan)#define CS_EVEN (CS_EVEN_PRIMARY | CS_EVEN_SECONDARY)#define CS_ODD (CS_ODD_PRIMARY | CS_ODD_SECONDARY) +static int f1x_get_cs_mode (int dimm,u8 ctrl,struct amd64_pvt *pvt) +{ +u32 dbam = ctrl ? pvt->dbam1 : pvt->dbam0; + +return DBAM_DIMM (dimm, dbam); +} +static int f17_get_cs_mode (int dimm,u8 ctrl,struct amd64_pvt *pvt) {u8 base, count =0 ;
@@ -3346,16 +3353,10 @@ static void read_mc_regs(struct amd64_pvt *pvt)*/ static u32 get_csrow_nr_pages (struct amd64_pvt *pvt,u8 dct,int csrow_nr_orig) { -u32 dbam = dct ? pvt->dbam1 : pvt->dbam0;int csrow_nr = csrow_nr_orig;u32 cs_mode, nr_pages; -if (!pvt->umc) { - csrow_nr >>=1 ; - cs_mode =DBAM_DIMM (csrow_nr, dbam); - }else { - cs_mode =f17_get_cs_mode (csrow_nr >>1 , dct, pvt); - } + cs_mode = pvt->ops->get_cs_mode (csrow_nr >>1 , dct, pvt); nr_pages = pvt->ops->dbam_to_cs (pvt, dct, cs_mode, csrow_nr); nr_pages <<=20 -PAGE_SHIFT ;
@@ -3799,6 +3800,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; pvt->ops->dump_misc_regs = __dump_misc_regs; + pvt->ops->get_cs_mode = f1x_get_cs_mode;break ;case 0x10 :
@@ -3819,6 +3821,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; pvt->ops->dump_misc_regs = __dump_misc_regs; + pvt->ops->get_cs_mode = f1x_get_cs_mode;break ;case 0x15 :
@@ -3855,6 +3858,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; pvt->ops->dump_misc_regs = __dump_misc_regs; + pvt->ops->get_cs_mode = f1x_get_cs_mode;break ;case 0x16 :
@@ -3881,6 +3885,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows; pvt->ops->dump_misc_regs = __dump_misc_regs; + pvt->ops->get_cs_mode = f1x_get_cs_mode;break ;case 0x17 :
@@ -3921,6 +3926,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows_df; pvt->ops->dump_misc_regs = __dump_misc_regs_df; + pvt->ops->get_cs_mode = f17_get_cs_mode;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3967,6 +3973,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->setup_mci_misc_attrs = f1x_setup_mci_misc_attrs; pvt->ops->populate_csrows = init_csrows_df; pvt->ops->dump_misc_regs = __dump_misc_regs_df; + pvt->ops->get_cs_mode = f17_get_cs_mode;break ;default :
@@ -3981,7 +3988,7 @@ static int per_family_init(struct amd64_pvt *pvt) !pvt->ops->get_mc_regs || !pvt->ops->ecc_enabled || !pvt->ops->determine_edac_cap || !pvt->ops->determine_edac_ctl_cap || !pvt->ops->setup_mci_misc_attrs || !pvt->ops->populate_csrows || - !pvt->ops->dump_misc_regs) { + !pvt->ops->dump_misc_regs || !pvt->ops->get_cs_mode) {edac_dbg (1 ,"Common helper routines not defined.\n" );return -EFAULT ; }
drivers/edac/amd64_edac.h +1 -0
@@ -475,6 +475,7 @@ struct low_ops {void (*setup_mci_misc_attrs)(struct mem_ctl_info *mci);int (*populate_csrows)(struct mem_ctl_info *mci);void (*dump_misc_regs)(struct amd64_pvt *pvt); +int (*get_cs_mode)(int dimm,u8 ctrl,struct amd64_pvt *pvt); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 13/14] EDAC/amd64: Add get_cs_mode() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
get_cs_mode()inpvt->opsand assign family specificget_cs_mode()definitions appropriately.
Please include the "why", but otherwise this seems okay.
Thanks,
Yazen
PATCH 14/14 EDAC/amd64: Add get_umc_error_info() into pvt->ops
In reply to Naveen Krishna ChatradhiFrom: Muralidhara M K <[email protected]>
Add function pointer for get_umc_error_info() in pvt->ops and assign family specific get_umc_error_info() definitions appropriately.
---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/
drivers/edac/amd64_edac.c | 19 ++++++++++++++----- drivers/edac/amd64_edac.h | 1 + 2 files changed, 15 insertions(+), 5 deletions(-)
drivers/edac/amd64_edac.c +14 -5
@@ -3056,10 +3056,13 @@ static inline void decode_bus_error(int node_id, struct mce *m)* Currently, we can derive the channel number by looking at the 6th nibble in * the instance_id. For example, instance_id=0xYXXXXX where Y is the channel * number. +* +* csrow can be derived from the lower 3 bits of MCA_SYND value. */ -static int find_umc_channel (struct mce *m) +static void f17_umc_err_info (struct mce *m,struct err_info *err) { -return (m->ipid &GENMASK (31 ,0 )) >>20 ; + err->channel = (m->ipid &GENMASK (31 ,0 )) >>20 ; + err->csrow = m->synd &0x7 ; }static void decode_umc_error (int node_id,struct mce *m)
@@ -3081,8 +3084,6 @@ static void decode_umc_error(int node_id, struct mce *m)if (m->status &MCI_STATUS_DEFERRED ) ecc_type =3 ; - err.channel =find_umc_channel (m); -if (!(m->status &MCI_STATUS_SYNDV )) { err.err_code =ERR_SYND ; goto log_error;
@@ -3097,7 +3098,7 @@ static void decode_umc_error(int node_id, struct mce *m) err.err_code =ERR_CHANNEL ; } - err.csrow = m->synd &0x7 ; + pvt->ops->get_umc_error_info (m, &err);if (umc_normaddr_to_sysaddr (m->addr, pvt->mc_node_id, err.channel, &sys_addr)) { err.err_code =ERR_NORM_ADDR ;
@@ -3927,6 +3928,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->populate_csrows = init_csrows_df; pvt->ops->dump_misc_regs = __dump_misc_regs_df; pvt->ops->get_cs_mode = f17_get_cs_mode; + pvt->ops->get_umc_error_info = f17_umc_err_info;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;
@@ -3974,6 +3976,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->populate_csrows = init_csrows_df; pvt->ops->dump_misc_regs = __dump_misc_regs_df; pvt->ops->get_cs_mode = f17_get_cs_mode; + pvt->ops->get_umc_error_info = f17_umc_err_info;break ;default :
@@ -3993,6 +3996,12 @@ static int per_family_init(struct amd64_pvt *pvt)return -EFAULT ; } +/* ops required for families 17h and later */ +if (pvt->fam >=0x17 && !pvt->ops->get_umc_error_info) { +edac_dbg (1 ,"Platform specific helper routines not defined.\n" ); +return -EFAULT ; + } +return 0 ; }
drivers/edac/amd64_edac.h +1 -0
@@ -476,6 +476,7 @@ struct low_ops {int (*populate_csrows)(struct mem_ctl_info *mci);void (*dump_misc_regs)(struct amd64_pvt *pvt);int (*get_cs_mode)(int dimm,u8 ctrl,struct amd64_pvt *pvt); +void (*get_umc_error_info)(struct mce *m,struct err_info *err); }; int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
Signature · 1 line
2.25.1
Yazen Ghannam
maintainerRe: [PATCH 14/14] EDAC/amd64: Add get_umc_error_info() into pvt->ops
Quoted 5 lines · Naveen Krishna Chatradhi
From: Muralidhara M K <[email protected]>
Add function pointer for
get_umc_error_info()inpvt->opsand assign family specificget_umc_error_info()definitions appropriately.
Please include the "why".
Quoted 15 lines
Signed-off-by Muralidhara M K <[email protected]>Signed-off-by Naveen Krishna Chatradhi <[email protected]>---
This patch is created by splitting the 5/12th patch in series
[v7 5/12] https://patchwork.kernel.org/project/linux-edac/patch/[email protected]/drivers/edac/amd64_edac.c | 19 ++++++++++++++----- drivers/edac/amd64_edac.h | 1 + 2 files changed, 15 insertions(+), 5 deletions(-)drivers/edac/amd64_edac.c +0
-0
drivers/edac/amd64_edac.c static inline void decode_bus_error(int node_id, struct mce *m) · line 3060
Quoted 5 lines
drivers/edac/amd64_edac.c +2
-0@@ -3056,10 +3056,13 @@ static inline void decode_bus_error(int node_id, struct mce *m)* Currently, we can derive the channel number by looking at the 6th nibble in * the instance_id. For example, instance_id=0xYXXXXX where Y is the channel * number. +* +* csrow can be derived from the lower 3 bits of MCA_SYND value.
I think this comment can be expanded.
For DRAM ECC errors, the Chip Select number is given in bits [2:0] of the MCA_SYND[ErrorInformation] field.
Quoted 45 lines
drivers/edac/amd64_edac.c +6
-5*/ -static int find_umc_channel (struct mce *m) +static void f17_umc_err_info (struct mce *m,struct err_info *err) { -return (m->ipid &GENMASK (31 ,0 )) >>20 ; + err->channel = (m->ipid &GENMASK (31 ,0 )) >>20 ; + err->csrow = m->synd &0x7 ; }static void decode_umc_error (int node_id,struct mce *m)@@ -3081,8 +3084,6 @@ static void decode_umc_error(int node_id, struct mce *m)if (m->status &MCI_STATUS_DEFERRED ) ecc_type =3 ; - err.channel =find_umc_channel (m); -if (!(m->status &MCI_STATUS_SYNDV )) { err.err_code =ERR_SYND ; goto log_error;@@ -3097,7 +3098,7 @@ static void decode_umc_error(int node_id, struct mce *m) err.err_code =ERR_CHANNEL ; } - err.csrow = m->synd &0x7 ; + pvt->ops->get_umc_error_info (m, &err);if (umc_normaddr_to_sysaddr (m->addr, pvt->mc_node_id, err.channel, &sys_addr)) { err.err_code =ERR_NORM_ADDR ;@@ -3927,6 +3928,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->populate_csrows = init_csrows_df; pvt->ops->dump_misc_regs = __dump_misc_regs_df; pvt->ops->get_cs_mode = f17_get_cs_mode; + pvt->ops->get_umc_error_info = f17_umc_err_info;if (pvt->fam ==0x18 ) { pvt->ctl_name ="F18h" ;@@ -3974,6 +3976,7 @@ static int per_family_init(struct amd64_pvt *pvt) pvt->ops->populate_csrows = init_csrows_df; pvt->ops->dump_misc_regs = __dump_misc_regs_df; pvt->ops->get_cs_mode = f17_get_cs_mode; + pvt->ops->get_umc_error_info = f17_umc_err_info;break ;default :
drivers/edac/amd64_edac.c static int per_family_init(struct amd64_pvt *pvt) · line 4004
Quoted 9 lines
drivers/edac/amd64_edac.c +6
-0@@ -3993,6 +3996,12 @@ static int per_family_init(struct amd64_pvt *pvt)return -EFAULT ; } +/* ops required for families 17h and later */ +if (pvt->fam >=0x17 && !pvt->ops->get_umc_error_info) { +edac_dbg (1 ,"Platform specific helper routines not defined.\n" ); +return -EFAULT ; + } +
I think this is a case where having the Family 17h+ ops as default would make sense.
Thanks,
Yazen