Skip to contentSkip to conversation

ASoC: codecs: add support for ES8326 dts

PATCH In review Zhu Ning 2 participants 2 messages Apr 5, 2022 – Apr 8, 2022

Subsystems (2)
lore
Share & tools
lore

Zhu Ning

author
#0 lore raw

PATCH 1/1 ASoC: codecs: add support for ES8326 dts

From: yangxiaohua <[email protected]>

The ES8326 codec is not compatible with ES8316 and requires a dedicated driver.

This is a separate patch for ES8326 dts

---
 .../bindings/sound/everest,es8326.yaml        | 109 ++++++++++++++++++
 1 file changed, 109 insertions(+)
 create mode 100755 Documentation/devicetree/bindings/sound/everest,es8326.yaml
Documentation/devicetree/bindings/sound/everest,es8326.yaml new file +109 -0
new file mode 100755
index 000000000000..8cae9c328dbc
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8326.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8326 audio CODEC
+
+maintainers:
+  - David Yang <[email protected]>
+
+properties:
+  compatible:
+    const: everest,es8326
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for master clock (MCLK)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#sound-dai-cells":
+    const: 0
+
+  mclk-rate:
+    description:
+      clock rate of mclk
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+
+  everest,jack-pol:
+    description:
+      just the value of reg 57. Bit(3) decides whether the jack polarity is inverted.
+      Bit(2) decides whether the bottom on the headset is inverted.
+      Bit(1)/(0) decides the mic properity to be OMTP/CTIA or auto.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minimum: 0
+    maximum: 0x0f
+    default: 0x0f
+  
+  everest,mic1-src:
+    description:
+      the value of reg 2A when headset plugged.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minimum: 0x00
+    maximum: 0x77
+    default: 0x22
+
+  everest,mic2-src:
+    description:
+      the value of reg 2A when headset unplugged.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minimum: 0x00
+    maximum: 0x77
+    default: 0x44
+
+  everest,amic1-src:
+    description:
+      the value of reg 23 when headset plugged.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minimum: 0x19
+    maximum: 0x29
+    default: 0x19
+
+  everest,amic2-src:
+    description:
+      the value of reg 23 when headset unplugged.
+      Set to 0x19 if dmic used. Set to 0x29 if amic used.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minimum: 0x19
+    maximum: 0x29
+    default: 0x19
+
+  everest,jack-detect-inverted:
+    description:
+      Defined to invert the jack detection.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8326: codec@19 {
+        compatible = "everest,es8326";
+        reg = <0x19>;
+        clocks = <&clks 10>;
+        clock-names = "mclk";
+        #sound-dai-cells = <0>;
+        mic1-src = [22];
+        mic2-src = [44];
+        amic1-src = [19];
+        amic2-src = [19];
+        jack-pol = [0e];
+      };
+    };
Signature · 1 line
2.17.1
maintainer
#1 lore raw

Documentation/devicetree/bindings/sound/everest,es8326.yaml line 34

Quoted 5 lines · Zhu Ning
Documentation/devicetree/bindings/sound/everest,es8326.yaml new file +5 -0
+  mclk-rate:
+    description:
+      clock rate of mclk
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1

There's a standard clock binding for assigning rates to clocks (assigned-clocks) - that should be used instead of having a custom binding for the MCLK rate.