Skip to contentSkip to conversation

ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload

PATCH In review Peter Ujfalusi 3 participants 3 messages Apr 27, 2022 – May 3, 2022

Subsystems (3)
lore
Share & tools
lore

Peter Ujfalusi

author maintainer
#0 lore raw

PATCH v4 1/1 ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload

It is possible to craft a topology where sof_get_control_data() would do out of bounds access because it expects that it is only called when the payload is bytes type.
Confusingly it also handles other types of controls, but the payload parsing implementation is only valid for bytes.

Fix the code to count the non bytes controls and instead of storing a pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes), store the pointer to the data itself and add a new member to save the size of the data.

In case of non bytes controls we store the pointer to the chanv itself, which is just an array of values at the end.

In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check against NULL since it is incorrect and invalid in this context. The data is pointing to the end of cdata struct, so it should never be null.

---
Hi,

Changes since v3:
- Move the comment about validating data along with the code which validates the data (checks the SOF_ABI_MAGIC)

Changes since v2:
- Drop the cdata->data check against NULL as it is not a valid test and since we are in sof_get_control_data() the memory has been already allocated

changes since v1:
- adjust the payload size for non bytes controls by subtracting the size of the sof_ipc_ctrl_data struct, plus add comment to note this

Regards,
Peter

 sound/soc/sof/ipc3-topology.c | 39 +++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 13 deletions(-)
sound/soc/sof/ipc3-topology.c +26 -13
index 572bcbfdb356..bc848f556b88 100644
@@ -20,7 +20,8 @@
 struct sof_widget_data {
 	int ctrl_type;
 	int ipc_cmd;
-	struct sof_abi_hdr *pdata;
+	void *pdata;
+	size_t pdata_size;
 	struct snd_sof_control *control;
 };
 
@@ -784,16 +785,26 @@ static int sof_get_control_data(struct snd_soc_component *scomp,
 		}
 
 		cdata = wdata[i].control->ipc_control_data;
-		wdata[i].pdata = cdata->data;
-		if (!wdata[i].pdata)
-			return -EINVAL;
 
-		/* make sure data is valid - data can be updated at runtime */
-		if (widget->dobj.widget.kcontrol_type[i] == SND_SOC_TPLG_TYPE_BYTES &&
-		    wdata[i].pdata->magic != SOF_ABI_MAGIC)
-			return -EINVAL;
+		if (widget->dobj.widget.kcontrol_type[i] == SND_SOC_TPLG_TYPE_BYTES) {
+			/* make sure data is valid - data can be updated at runtime */
+			if (cdata->data->magic != SOF_ABI_MAGIC)
+				return -EINVAL;
+
+			wdata[i].pdata = cdata->data->data;
+			wdata[i].pdata_size = cdata->data->size;
+		} else {
+			/* points to the control data union */
+			wdata[i].pdata = cdata->chanv;
+			/*
+			 * wdata[i].control->size is calculated with struct_size
+			 * and includes the size of struct sof_ipc_ctrl_data
+			 */
+			wdata[i].pdata_size = wdata[i].control->size -
+					      sizeof(struct sof_ipc_ctrl_data);
+		}
 
-		*size += wdata[i].pdata->size;
+		*size += wdata[i].pdata_size;
 
 		/* get data type */
 		switch (cdata->cmd) {
@@ -876,10 +887,12 @@ static int sof_process_load(struct snd_soc_component *scomp,
 	 */
 	if (ipc_data_size) {
 		for (i = 0; i < widget->num_kcontrols; i++) {
-			memcpy(&process->data[offset],
-			       wdata[i].pdata->data,
-			       wdata[i].pdata->size);
-			offset += wdata[i].pdata->size;
+			if (!wdata[i].pdata_size)
+				continue;
+
+			memcpy(&process->data[offset], wdata[i].pdata,
+			       wdata[i].pdata_size);
+			offset += wdata[i].pdata_size;
 		}
 	}
 
Signature · 1 line
2.36.0
Reviewed-by Tested-by on v4 1/1
#1 lore raw
Quoted 14 lines · Peter Ujfalusi

It is possible to craft a topology where sof_get_control_data() would do out of bounds access because it expects that it is only called when the payload is bytes type.
Confusingly it also handles other types of controls, but the payload parsing implementation is only valid for bytes.

Fix the code to count the non bytes controls and instead of storing a pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes), store the pointer to the data itself and add a new member to save the size of the data.

In case of non bytes controls we store the pointer to the chanv itself, which is just an array of values at the end.

Quoted 7 lines

In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check against NULL since it is incorrect and invalid in this context. The data is pointing to the end of cdata struct, so it should never be null.

FWIW

maintainer
#2 lore raw
In reply to Peter Ujfalusi
Quoted 6 lines · Peter Ujfalusi

It is possible to craft a topology where sof_get_control_data() would do out of bounds access because it expects that it is only called when the payload is bytes type.
Confusingly it also handles other types of controls, but the payload parsing implementation is only valid for bytes.

Quoted 6 lines

Fix the code to count the non bytes controls and instead of storing a pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes), store the pointer to the data itself and add a new member to save the size of the data.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload

      commit: a962890a5a3cce903ff7c7a19fadee63ed9efdc7

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark