ARM: dts: enable am33xx and am43xx wkup_m3_ipc features
cover ARM: dts: enable am33xx and am43xx wkup_m3_ipc features
Enable new wkup_m3_ipc features which includes IO isolation on the am437x-gp-evm and i2c voltage scaling firmware for both am33xx and am43xx based boards.
This dts series depends on the bindings and driver changes in:
- [PATCH v3 0/2] soc: ti: wkup_m3_ipc: support i2c voltage scaling [1]
- [PATCH v3 0/2] soc: ti: wkup_m3_ipc: Add support for IO Isolation [2]
Dave Gerlach (3):
ARM: dts: am437x-gp-evm: Enable wkup_m3 control of IO isolation
ARM: dts: am33xx: Add i2c voltage scaling firmware to wkup_m3_ipc
ARM: dts: am43xx: Add i2c voltage scaling firmware to wkup_m3_ipc
arch/arm/boot/dts/am335x-bone-common.dtsi | 4 ++++ arch/arm/boot/dts/am335x-evm.dts | 4 ++++ arch/arm/boot/dts/am335x-evmsk.dts | 4 ++++ arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++ arch/arm/boot/dts/am437x-sk-evm.dts | 4 ++++ arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++ 6 files changed, 25 insertions(+)
[1] https://lore.kernel.org/linux-devicetree/[email protected]/
[2] https://lore.kernel.org/linux-devicetree/[email protected]/
Signature · 1 line
2.32.0
PATCH 1/3 ARM: dts: am437x-gp-evm: Enable wkup_m3 control of IO isolation
From: Dave Gerlach <[email protected]>
With this flag wkup_m3 is able to control IO isolation during suspend on the board.
--- arch/arm/boot/dts/am437x-gp-evm.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/am437x-gp-evm.dts +4 -0
@@ -1127,6 +1127,10 @@ &cpu { cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + ti,set-io-isolation; +}; + &pruss1_mdio { status = "disabled"; };
Signature · 1 line
2.32.0
PATCH 2/3 ARM: dts: am33xx: Add i2c voltage scaling firmware to wkup_m3_ipc
In reply to Drew FustiniFrom: Dave Gerlach <[email protected]>
Add appropriate firmware-name property for all am33xx platforms.
--- arch/arm/boot/dts/am335x-bone-common.dtsi | 4 ++++ arch/arm/boot/dts/am335x-evm.dts | 4 ++++ arch/arm/boot/dts/am335x-evmsk.dts | 4 ++++ 3 files changed, 12 insertions(+)
arch/arm/boot/dts/am335x-bone-common.dtsi +4 -0
@@ -405,3 +405,7 @@ &rtc { &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-bone-scale-data.bin"; +};
arch/arm/boot/dts/am335x-evm.dts +4 -0
@@ -782,3 +782,7 @@ &rtc { &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +};
arch/arm/boot/dts/am335x-evmsk.dts +4 -0
@@ -719,3 +719,7 @@ &rtc { &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +};
Signature · 1 line
2.32.0
PATCH 3/3 ARM: dts: am43xx: Add i2c voltage scaling firmware to wkup_m3_ipc
In reply to Drew FustiniFrom: Dave Gerlach <[email protected]>
Add appropriate firmware-name property for all am43xx platforms.
--- arch/arm/boot/dts/am437x-gp-evm.dts | 1 + arch/arm/boot/dts/am437x-sk-evm.dts | 4 ++++ arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++ 3 files changed, 9 insertions(+)
arch/arm/boot/dts/am437x-gp-evm.dts +1 -0
@@ -1129,6 +1129,7 @@ &cpu { &wkup_m3_ipc { ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; }; &pruss1_mdio {
arch/arm/boot/dts/am437x-sk-evm.dts +4 -0
@@ -893,6 +893,10 @@ vpfe0_ep: endpoint { }; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; };
arch/arm/boot/dts/am43x-epos-evm.dts +4 -0
@@ -1019,6 +1019,10 @@ &cpu { cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; };
Signature · 1 line
2.32.0
Quoted 4 lines · Drew Fustini
Enable new
wkup_m3_ipcfeatures which includes IO isolation on the am437x-gp-evm and i2c voltage scaling firmware for both am33xx and am43xx based boards.
Quoted 8 lines
This dts series depends on the bindings and driver changes in:
- [PATCH v3 0/2] soc: ti:wkup_m3_ipc: support i2c voltage scaling [1]
- [PATCH v3 0/2] soc: ti:wkup_m3_ipc: Add support for IO Isolation [2]Dave Gerlach (3):
ARM: dts: am437x-gp-evm: Enablewkup_m3control of IO isolation
ARM: dts: am33xx: Add i2c voltage scaling firmware towkup_m3_ipc
ARM: dts: am43xx: Add i2c voltage scaling firmware towkup_m3_ipc
Applying these all into omap-for-v5.19/dt thanks.
Tony