add support for Sierra Wireless EM7590 0xc080 and 0xc081 compositions.
Subsystems (2)
PATCH 1/1 add support for Sierra Wireless EM7590 0xc080 and 0xc081 compositions.
add support for Sierra Wireless EM7590 0xc080 and 0xc081 compositions.
--- drivers/usb/serial/qcserial.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/serial/qcserial.c +2 -0
@@ -166,6 +166,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */ + {DEVICE_SWI(0x1199, 0xc080)}, /* Sierra Wireless EM7590 */ + {DEVICE_SWI(0x1199, 0xc081)}, /* Sierra Wireless EM7590 QDL */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
Signature · 1 line
2.17.1
PATCH v2 1/1 add support for Sierra Wireless EM7590 0xc080 and 0xc081 compositions.
add support for Sierra Wireless EM7590 0xc080 and 0xc081
--- drivers/usb/serial/qcserial.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/serial/qcserial.c +2 -0
@@ -166,6 +166,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */ + {DEVICE_SWI(0x1199, 0xc080)}, /* Sierra Wireless EM7590 QDL */ + {DEVICE_SWI(0x1199, 0xc081)}, /* Sierra Wireless EM7590 */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
Signature · 1 line
2.17.1
Greg KH
maintainerQuoted 23 lines · Ethan Yang
add support for Sierra Wireless EM7590
0xc080and0xc081Signed-off-by Ethan Yang <[email protected]>--- drivers/usb/serial/qcserial.c | 2 ++ 1 file changed, 2 insertions(+)drivers/usb/serial/qcserial.c +2
-0@@ -166,6 +166,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */ + {DEVICE_SWI(0x1199, 0xc080)}, /* Sierra Wireless EM7590 QDL */ + {DEVICE_SWI(0x1199, 0xc081)}, /* Sierra Wireless EM7590 */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */Signature · 1 line
2.17.1
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.
You are receiving this message because of the following common error(s) as indicated below:
- This looks like a new version of a previously submitted patch, but you did not list below the --- line any changes from the previous version. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for what needs to be done here to properly describe this.
If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.
thanks,
greg k-h's patch email bot
PATCH v3 1/1 usb: serial: qcserial: add support for Sierra Wireless EM7590
From: Ethan Yang <[email protected]>
add support for Sierra Wireless EM7590 0xc080/0xc081 compositions
--- drivers/usb/serial/qcserial.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/serial/qcserial.c +2 -0
@@ -166,6 +166,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ {DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */ + {DEVICE_SWI(0x1199, 0xc080)}, /* Sierra Wireless EM7590 QDL */ + {DEVICE_SWI(0x1199, 0xc081)}, /* Sierra Wireless EM7590 */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
Signature · 1 line
2.17.1
Johan Hovold
maintainerRe: [PATCH v3] usb: serial: qcserial: add support for Sierra Wireless EM7590
Quoted 6 lines · On Mon, Apr 25, 2022 at 01:58:40PM +0800, [email protected] wrote:
From: Ethan Yang <[email protected]>
add support for Sierra Wireless EM7590 0xc080/0xc081 compositions
Signed-off-by Ethan Yang <[email protected]>---
Please include a short changelog here (after the ---) when updating patches.
Please also include the output of usb-devices (or lsusb -v) for these two compositions for completeness.
Johan
RE: [PATCH v3] usb: serial: qcserial: add support for Sierra Wireless EM7590
Hi Johan,
Here is the change log:
To revise the correct composition for QDL/APP mode. 1199:c080 is for QDL, and 1199:c081 is for APP mode.
I also enclose the lsusb -v output for both compositions.
Thanks,
Ethan
-----Original Message-----
From: Johan Hovold <[email protected]>
Sent: Thursday, May 5, 2022 19:30
To: 皓宇 楊 <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; Glen Chiang <[email protected]>; Ethan Yang <[email protected]>
Subject: Re: [PATCH v3] usb: serial: qcserial: add support for Sierra Wireless EM7590
Quoted 6 lines · On Mon, Apr 25, 2022 at 01:58:40PM +0800, [email protected] wrote:
From: Ethan Yang <[email protected]>
add support for Sierra Wireless EM7590 0xc080/0xc081 compositions
Signed-off-by Ethan Yang <[email protected]>---
Please include a short changelog here (after the ---) when updating patches.
Please also include the output of usb-devices (or lsusb -v) for these two compositions for completeness.
Johan
ethan@ethan-Latitude-7280:~/work/mpbl/5164/MBPL_R21_B5164/Drivers/USB$ lsusb -v -d 1199:
Bus 002 Device 003: ID 1199:c081 Sierra Wireless, Inc. Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 9 idVendor 0x1199 Sierra Wireless, Inc. idProduct 0xc081 bcdDevice 5.04 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Sierra Wireless EM7590 Mobile Broadband Adapter iSerial 3 0123456789ABCDEF bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 282
bNumInterfaces 5
bConfigurationValue 1
iConfiguration 4 diag,nmea,modem,mbim
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 224mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 96
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 12
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 14
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 12
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 14
bInterfaceProtocol 0
iInterface 6 MBIM Control
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 12
bSlaveInterface 13
CDC MBIM:
bcdMBIMVersion 1.00
wMaxControlMessage 4096
bNumberFilters 32
bMaxFilterSize 128
wMaxSegmentSize 2048
bmNetworkCapabilities 0x20
8-byte ntb input size
UNRECOGNIZED CDC: 08 24 1c 00 01 40 dc 05 Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 9
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 13
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 13
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 2
iInterface 7 MBIM Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x0000211e
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000f
Device can operate at Low Speed (1Mbps)
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 0 micro seconds
bU2DevExitLat 0 micro seconds
Device Status: 0x0000
(Bus Powered)
ethan@ethan-Latitude-7280:~/work/mpbl/5164/MBPL_R21_B5164/Drivers/USB$ lsusb -v -d 1199:
Bus 001 Device 005: ID 1199:c080 Sierra Wireless, Inc. Couldn't open device, some information will be missing Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1199 Sierra Wireless, Inc. idProduct 0xc080 bcdDevice 0.00 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Sierra Wireless EM7590 Mobile Broadband Adapter iSerial 3 0123456789ABCDEF bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Johan Hovold
maintainerRe: [PATCH v3] usb: serial: qcserial: add support for Sierra Wireless EM7590
Quoted 5 lines · Ethan Yang
Hi Johan,
Here is the change log:
To revise the correct composition for QDL/APP mode. 1199:c080 is for QDL, and 1199:c081 is for APP mode.
I meant that when you when you resend a new version of a patch you should include a changelog for what changed since the previous version(s) (below the --- line).
In this case I think you only changed the From address from v1 to v2, but I'm not sure.
No need to resend, but please keep that in mind for your future submissions.
Quoted 1 line
I also enclose the lsusb -v output for both compositions.
Thanks a lot for that.
I've applied the patch now.
Johan