Skip to contentSkip to conversation

kbuild: factor out the common installation code into scripts/install.sh

PATCH In review Masahiro Yamada 2 participants 4 messages May 3, 2022 – May 10, 2022

Subsystems (12)
Arm (32-bit) x86 PowerPC Kbuild +8 more subsystems
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 kbuild: factor out the common installation code into scripts/install.sh

Many architectures have similar install.sh scripts.

The first half is really generic; verifies that the kernel image and System.map exist, then executes ~/bin/${INSTALLKERNEL} or /sbin/${INSTALLKERNEL} if available.

The second half is kind of arch-specific. It just copies the kernel image and System.map to the destination, but the code is slightly different.

This patch factors out the generic part into scripts/install.sh.

---

Changes in v2:
- Move the installkernel parameters to scripts/install.sh

 Makefile                     |  3 ++-
 arch/arm/Makefile            |  4 ++--
 arch/arm/boot/install.sh     | 21 ------------------
 arch/arm64/Makefile          |  6 ++----
 arch/arm64/boot/install.sh   | 21 ------------------
 arch/ia64/Makefile           |  3 ++-
 arch/ia64/install.sh         | 10 ---------
 arch/m68k/Makefile           |  3 ++-
 arch/m68k/install.sh         | 22 -------------------
 arch/nios2/Makefile          |  3 +--
 arch/nios2/boot/install.sh   | 22 -------------------
 arch/parisc/Makefile         | 11 +++++-----
 arch/parisc/install.sh       | 28 ------------------------
 arch/powerpc/Makefile        |  3 +--
 arch/powerpc/boot/install.sh | 23 --------------------
 arch/riscv/Makefile          |  7 +++---
 arch/riscv/boot/install.sh   | 21 ------------------
 arch/s390/Makefile           |  3 +--
 arch/s390/boot/install.sh    |  6 ------
 arch/sparc/Makefile          |  3 +--
 arch/sparc/boot/install.sh   | 22 -------------------
 arch/x86/Makefile            |  3 +--
 arch/x86/boot/install.sh     | 22 -------------------
 scripts/install.sh           | 41 ++++++++++++++++++++++++++++++++++++
 24 files changed, 64 insertions(+), 247 deletions(-)
 mode change 100644 => 100755 arch/arm/boot/install.sh
 mode change 100644 => 100755 arch/arm64/boot/install.sh
 mode change 100644 => 100755 arch/ia64/install.sh
 mode change 100644 => 100755 arch/m68k/install.sh
 mode change 100644 => 100755 arch/nios2/boot/install.sh
 mode change 100644 => 100755 arch/parisc/install.sh
 mode change 100644 => 100755 arch/powerpc/boot/install.sh
 mode change 100644 => 100755 arch/riscv/boot/install.sh
 mode change 100644 => 100755 arch/s390/boot/install.sh
 mode change 100644 => 100755 arch/sparc/boot/install.sh
 mode change 100644 => 100755 arch/x86/boot/install.sh
 create mode 100755 scripts/install.sh
Makefile +2 -1
index 9a60f732bb3c..154c32af8805 100644
@@ -1298,7 +1298,8 @@ scripts_unifdef: scripts_basic
 # to this Makefile to build and install external modules.
 # Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
 
-install: sub_make_done :=
+quiet_cmd_install = INSTALL $(INSTALL_PATH)
+      cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh
 
 # ---------------------------------------------------------------------------
 # Tools
arch/arm/Makefile +2 -2
index a2391b8de5a5..187f4b2c5c73 100644
@@ -318,9 +318,9 @@ $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
-	$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" \
-	$(boot)/$(patsubst %install,%Image,$@) System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 PHONY += vdso_install
 vdso_install:
arch/arm/boot/install.sh +0 -21
old mode 100644
new mode 100755
index 2a45092a40e3..9ec11fac7d8d
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/arm/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -18,25 +16,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install
arch/arm64/Makefile +2 -4
index 2f1de88651e6..6d9d4a58b898 100644
@@ -162,11 +162,9 @@ Image: vmlinux
 Image.%: Image
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-install: install-image := Image
-zinstall: install-image := Image.gz
+install: KBUILD_IMAGE := $(boot)/Image
 install zinstall:
-	$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
-	$(boot)/$(install-image) System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 PHONY += vdso_install
 vdso_install:
arch/arm64/boot/install.sh +0 -21
old mode 100644
new mode 100755
index d91e1f022573..7399d706967a
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/arm64/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -18,25 +16,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "Image.gz" ]; then
 # Compressed install
arch/ia64/Makefile +2 -1
index 6c4bfa54b703..e55c2f138656 100644
@@ -72,8 +72,9 @@ archheaders:
 
 CLEAN_FILES += vmlinux.gz
 
+install: KBUILD_IMAGE := vmlinux.gz
 install:
-	sh $(srctree)/arch/ia64/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 define archhelp
   echo '* compressed	- Build compressed kernel image'
arch/ia64/install.sh +0 -10
old mode 100644
new mode 100755
index 0e932f5dcd1a..2d4b66a9f362
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/ia64/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -17,14 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
 
 if [ -f $4/vmlinuz ]; then
 	mv $4/vmlinuz $4/vmlinuz.old
arch/m68k/Makefile +2 -1
index 740fc97b9c0f..e358605b70ba 100644
@@ -138,5 +138,6 @@ CLEAN_FILES += vmlinux.gz vmlinux.bz2
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/m68k/kernel/syscalls all
 
+install: KBUILD_IMAGE := vmlinux.gz
 install:
-	sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
arch/m68k/install.sh +0 -22
old mode 100644
new mode 100755
index 57d640d4382c..af65e16e5147
@@ -15,28 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
 
 if [ -f $4/vmlinuz ]; then
 	mv $4/vmlinuz $4/vmlinuz.old
arch/nios2/Makefile +1 -2
index 02d678559066..d6a7499b814c 100644
@@ -56,8 +56,7 @@ $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
 
 install:
-	sh $(srctree)/$(nios2-boot)/install.sh $(KERNELRELEASE) \
-	$(KBUILD_IMAGE) System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 define archhelp
   echo  '* vmImage         - Kernel-only image for U-Boot ($(KBUILD_IMAGE))'
arch/nios2/boot/install.sh +0 -22
old mode 100644
new mode 100755
index 3cb3f468bc51..34a2feec42c8
@@ -15,28 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
 
 if [ -f $4/vmlinuz ]; then
 	mv $4/vmlinuz $4/vmlinuz.old
arch/parisc/Makefile +5 -6
index 7583fc39ab2d..aca1710fd658 100644
@@ -184,12 +184,11 @@ vdso_install:
 	$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso $@
 	$(if $(CONFIG_COMPAT_VDSO), \
 		$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 $@)
-install:
-	$(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
-			$(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
-zinstall:
-	$(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
-			$(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
+
+install: KBUILD_IMAGE := vmlinux
+zinstall: KBUILD_IMAGE := vmlinuz
+install zinstall:
+	$(call cmd,install)
 
 CLEAN_FILES	+= lifimage
 MRPROPER_FILES	+= palo.conf
arch/parisc/install.sh +0 -28
old mode 100644
new mode 100755
index 70d3cffb0251..933d031c249a
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/parisc/install.sh, derived from arch/i386/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -17,32 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -n "${INSTALLKERNEL}" ]; then
-  if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-  if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-  if [ -x /usr/sbin/${INSTALLKERNEL} ]; then exec /usr/sbin/${INSTALLKERNEL} "$@"; fi
-fi
-
-# Default install
 
 if [ "$(basename $2)" = "vmlinuz" ]; then
 # Compressed install
arch/powerpc/Makefile +1 -2
index eb541e730d3c..45a9caa37b4e 100644
@@ -408,8 +408,7 @@ endef
 
 PHONY += install
 install:
-	sh -x $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" vmlinux \
-	System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 ifeq ($(KBUILD_EXTMOD),)
 # We need to generate vdso-offsets.h before compiling certain files in kernel/.
arch/powerpc/boot/install.sh +0 -23
old mode 100644
new mode 100755
index 14473150ddb4..461902c8a46d
@@ -15,32 +15,9 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
 
-# Bail with error code if anything goes wrong
 set -e
 
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install
-
 # this should work for both the pSeries zImage and the iSeries vmlinux.sm
 image_name=`basename $2`
 
arch/riscv/Makefile +3 -4
index 7d81102cffd4..2b93ca9f4fc3 100644
@@ -139,11 +139,10 @@ $(BOOT_TARGETS): vmlinux
 Image.%: Image
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-install: install-image = Image
-zinstall: install-image = Image.gz
+install: KBUILD_IMAGE := $(boot)/Image
+zinstall: KBUILD_IMAGE := $(boot)/Image.gz
 install zinstall:
-	$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
-	$(boot)/$(install-image) System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 PHONY += rv32_randconfig
 rv32_randconfig:
arch/riscv/boot/install.sh +0 -21
old mode 100644
new mode 100755
index 18c39159c0ff..4c63f3f0643d
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/riscv/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -18,25 +16,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "Image.gz" ]; then
 # Compressed install
arch/s390/Makefile +1 -2
index 7a65bca1e5af..cc2425539ef0 100644
@@ -128,8 +128,7 @@ all: bzImage
 KBUILD_IMAGE	:= $(boot)/bzImage
 
 install:
-	sh -x $(srctree)/$(boot)/install.sh $(KERNELRELEASE) $(KBUILD_IMAGE) \
-	      System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 bzImage: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
arch/s390/boot/install.sh +0 -6
old mode 100644
new mode 100755
index 515b27a996b3..616ba1660f08
@@ -14,12 +14,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 echo "Warning: '${INSTALLKERNEL}' command not available - additional " \
      "bootloader config required" >&2
arch/sparc/Makefile +1 -2
index c7008bbebc4c..fe58a410b4ce 100644
@@ -72,8 +72,7 @@ image zImage uImage tftpboot.img vmlinux.aout: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 install:
-	sh $(srctree)/$(boot)/install.sh $(KERNELRELEASE) $(KBUILD_IMAGE) \
-		System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/sparc/kernel/syscalls all
arch/sparc/boot/install.sh +0 -22
old mode 100644
new mode 100755
index b32851eae693..4f130f3f30d6
@@ -15,28 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
 
 if [ -f $4/vmlinuz ]; then
 	mv $4/vmlinuz $4/vmlinuz.old
arch/x86/Makefile +1 -2
index 63d50f65b828..5e1f21aae12b 100644
@@ -271,8 +271,7 @@ $(BOOT_TARGETS): vmlinux
 
 PHONY += install
 install:
-	$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
-		$(KBUILD_IMAGE) System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 PHONY += vdso_install
 vdso_install:
arch/x86/boot/install.sh +0 -22
old mode 100644
new mode 100755
index d13ec1c38640..0849f4b42745
@@ -15,28 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
- 	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
 
 if [ -f $4/vmlinuz ]; then
 	mv $4/vmlinuz $4/vmlinuz.old
scripts/install.sh new file +41 -0

41 lines not on this page · raw message

Signature · 1 line
2.32.0
#1 lore raw
Quoted 60 lines · On Tue, 3 May 2022 11:47 +0900 Masahiro Yamada wrote:

Many architectures have similar install.sh scripts.

The first half is really generic; verifies that the kernel image and System.map exist, then executes ~/bin/${INSTALLKERNEL} or /sbin/${INSTALLKERNEL} if available.

The second half is kind of arch-specific. It just copies the kernel image and System.map to the destination, but the code is slightly different.

This patch factors out the generic part into scripts/install.sh.

---

Changes in v2:
- Move the installkernel parameters to scripts/install.sh

 Makefile                     |  3 ++-
 arch/arm/Makefile            |  4 ++--
 arch/arm/boot/install.sh     | 21 ------------------
 arch/arm64/Makefile          |  6 ++----
 arch/arm64/boot/install.sh   | 21 ------------------
 arch/ia64/Makefile           |  3 ++-
 arch/ia64/install.sh         | 10 ---------
 arch/m68k/Makefile           |  3 ++-
 arch/m68k/install.sh         | 22 -------------------
 arch/nios2/Makefile          |  3 +--
 arch/nios2/boot/install.sh   | 22 -------------------
 arch/parisc/Makefile         | 11 +++++-----
 arch/parisc/install.sh       | 28 ------------------------
 arch/powerpc/Makefile        |  3 +--
 arch/powerpc/boot/install.sh | 23 --------------------
 arch/riscv/Makefile          |  7 +++---
 arch/riscv/boot/install.sh   | 21 ------------------
 arch/s390/Makefile           |  3 +--
 arch/s390/boot/install.sh    |  6 ------
 arch/sparc/Makefile          |  3 +--
 arch/sparc/boot/install.sh   | 22 -------------------
 arch/x86/Makefile            |  3 +--
 arch/x86/boot/install.sh     | 22 -------------------
 scripts/install.sh           | 41 ++++++++++++++++++++++++++++++++++++
 24 files changed, 64 insertions(+), 247 deletions(-)
 mode change 100644 => 100755 arch/arm/boot/install.sh
 mode change 100644 => 100755 arch/arm64/boot/install.sh
 mode change 100644 => 100755 arch/ia64/install.sh
 mode change 100644 => 100755 arch/m68k/install.sh
 mode change 100644 => 100755 arch/nios2/boot/install.sh
 mode change 100644 => 100755 arch/parisc/install.sh
 mode change 100644 => 100755 arch/powerpc/boot/install.sh
 mode change 100644 => 100755 arch/riscv/boot/install.sh
 mode change 100644 => 100755 arch/s390/boot/install.sh
 mode change 100644 => 100755 arch/sparc/boot/install.sh
 mode change 100644 => 100755 arch/x86/boot/install.sh
 create mode 100755 scripts/install.sh
Makefile +0 -0
index 9a60f732bb3c..154c32af8805 100644

Makefile scripts_unifdef: scripts_basic · line 1302

Quoted 6 lines
Makefile +2 -1
@@ -1298,7 +1298,8 @@ scripts_unifdef: scripts_basic
 # to this Makefile to build and install external modules.
 # Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
 
-install: sub_make_done :=
+quiet_cmd_install = INSTALL $(INSTALL_PATH)
+      cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh

This is the third 'cmd_install' in the tree; might it be better to take a more unique name (e.g. cmd_installkernel) to prevent confusion?

Quoted 64 lines
Makefile +0 -0
 # ---------------------------------------------------------------------------
 # Tools
arch/arm/Makefile +2 -2
index a2391b8de5a5..187f4b2c5c73 100644
@@ -318,9 +318,9 @@ $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
-	$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" \
-	$(boot)/$(patsubst %install,%Image,$@) System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 PHONY += vdso_install
 vdso_install:
arch/arm/boot/install.sh +0 -21
old mode 100644
new mode 100755
index 2a45092a40e3..9ec11fac7d8d
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/arm/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -18,25 +16,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install
arch/arm64/Makefile +0 -0
index 2f1de88651e6..6d9d4a58b898 100644

arch/arm64/Makefile Image: vmlinux · line 165

Quoted 6 lines
arch/arm64/Makefile +1 -2
@@ -162,11 +162,9 @@ Image: vmlinux
 Image.%: Image
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-install: install-image := Image
-zinstall: install-image := Image.gz
+install: KBUILD_IMAGE := $(boot)/Image

For me, it would have been more clear, if we'd also move the default KBUILD_IMAGE definition here (similar to the corresponding part in arch/parisc/Makefile):

zinstall: KBUILD_IMAGE := $(boot)/Image.gz

($(KBUILD_IMAGE) seems not to be used anywhere else in arch/arm64/ tree; but I haven't checked in depth.)

Quoted 194 lines
arch/arm64/Makefile +1 -2
 install zinstall:
-	$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
-	$(boot)/$(install-image) System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 PHONY += vdso_install
 vdso_install:
arch/arm64/boot/install.sh +0 -21
old mode 100644
new mode 100755
index d91e1f022573..7399d706967a
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/arm64/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -18,25 +16,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "Image.gz" ]; then
 # Compressed install
arch/ia64/Makefile +2 -1
index 6c4bfa54b703..e55c2f138656 100644
@@ -72,8 +72,9 @@ archheaders:
 
 CLEAN_FILES += vmlinux.gz
 
+install: KBUILD_IMAGE := vmlinux.gz
 install:
-	sh $(srctree)/arch/ia64/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 define archhelp
   echo '* compressed	- Build compressed kernel image'
arch/ia64/install.sh +0 -10
old mode 100644
new mode 100755
index 0e932f5dcd1a..2d4b66a9f362
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/ia64/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -17,14 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
 
 if [ -f $4/vmlinuz ]; then
 	mv $4/vmlinuz $4/vmlinuz.old
arch/m68k/Makefile +2 -1
index 740fc97b9c0f..e358605b70ba 100644
@@ -138,5 +138,6 @@ CLEAN_FILES += vmlinux.gz vmlinux.bz2
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/m68k/kernel/syscalls all
 
+install: KBUILD_IMAGE := vmlinux.gz
 install:
-	sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
arch/m68k/install.sh +0 -22
old mode 100644
new mode 100755
index 57d640d4382c..af65e16e5147
@@ -15,28 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
 
 if [ -f $4/vmlinuz ]; then
 	mv $4/vmlinuz $4/vmlinuz.old
arch/nios2/Makefile +1 -2
index 02d678559066..d6a7499b814c 100644
@@ -56,8 +56,7 @@ $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
 
 install:
-	sh $(srctree)/$(nios2-boot)/install.sh $(KERNELRELEASE) \
-	$(KBUILD_IMAGE) System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 define archhelp
   echo  '* vmImage         - Kernel-only image for U-Boot ($(KBUILD_IMAGE))'
arch/nios2/boot/install.sh +0 -22
old mode 100644
new mode 100755
index 3cb3f468bc51..34a2feec42c8
@@ -15,28 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
 
 if [ -f $4/vmlinuz ]; then
 	mv $4/vmlinuz $4/vmlinuz.old
arch/parisc/Makefile +0 -0
index 7583fc39ab2d..aca1710fd658 100644
@@ -184,12 +184,11 @@ vdso_install:
 	$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso $@
 	$(if $(CONFIG_COMPAT_VDSO), \

arch/parisc/Makefile vdso_install: · line 189

Quoted 10 lines
arch/parisc/Makefile +3 -6
 		$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 $@)
-install:
-	$(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
-			$(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
-zinstall:
-	$(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
-			$(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
+
+install: KBUILD_IMAGE := vmlinux
+zinstall: KBUILD_IMAGE := vmlinuz

Does this make the KBUILD_IMAGE definition in line 19 obsolete and unused?

Quoted 57 lines
arch/parisc/Makefile +2 -0
+install zinstall:
+	$(call cmd,install)
 
 CLEAN_FILES	+= lifimage
 MRPROPER_FILES	+= palo.conf
arch/parisc/install.sh +0 -28
old mode 100644
new mode 100755
index 70d3cffb0251..933d031c249a
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/parisc/install.sh, derived from arch/i386/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -17,32 +15,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -n "${INSTALLKERNEL}" ]; then
-  if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-  if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-  if [ -x /usr/sbin/${INSTALLKERNEL} ]; then exec /usr/sbin/${INSTALLKERNEL} "$@"; fi
-fi
-
-# Default install
 
 if [ "$(basename $2)" = "vmlinuz" ]; then
 # Compressed install
arch/powerpc/Makefile +0 -0
index eb541e730d3c..45a9caa37b4e 100644

arch/powerpc/Makefile endef · line 410

Quoted 3 lines
arch/powerpc/Makefile +0 -0
@@ -408,8 +408,7 @@ endef
 
 PHONY += install
 install:

I can't find a KBUILD_IMAGE definition in arch/powerpc/Makefile. Should it be set here as a target-specific varibable, too?

Kind regards,
Nicolas

#2 lore raw
Quoted 65 lines · Nicolas Schier
Quoted 63 lines · On Tue, 3 May 2022 11:47 +0900 Masahiro Yamada wrote:

Many architectures have similar install.sh scripts.

The first half is really generic; verifies that the kernel image and System.map exist, then executes ~/bin/${INSTALLKERNEL} or /sbin/${INSTALLKERNEL} if available.

The second half is kind of arch-specific. It just copies the kernel image and System.map to the destination, but the code is slightly different.

This patch factors out the generic part into scripts/install.sh.

---

Changes in v2:
- Move the installkernel parameters to scripts/install.sh

 Makefile                     |  3 ++-
 arch/arm/Makefile            |  4 ++--
 arch/arm/boot/install.sh     | 21 ------------------
 arch/arm64/Makefile          |  6 ++----
 arch/arm64/boot/install.sh   | 21 ------------------
 arch/ia64/Makefile           |  3 ++-
 arch/ia64/install.sh         | 10 ---------
 arch/m68k/Makefile           |  3 ++-
 arch/m68k/install.sh         | 22 -------------------
 arch/nios2/Makefile          |  3 +--
 arch/nios2/boot/install.sh   | 22 -------------------
 arch/parisc/Makefile         | 11 +++++-----
 arch/parisc/install.sh       | 28 ------------------------
 arch/powerpc/Makefile        |  3 +--
 arch/powerpc/boot/install.sh | 23 --------------------
 arch/riscv/Makefile          |  7 +++---
 arch/riscv/boot/install.sh   | 21 ------------------
 arch/s390/Makefile           |  3 +--
 arch/s390/boot/install.sh    |  6 ------
 arch/sparc/Makefile          |  3 +--
 arch/sparc/boot/install.sh   | 22 -------------------
 arch/x86/Makefile            |  3 +--
 arch/x86/boot/install.sh     | 22 -------------------
 scripts/install.sh           | 41 ++++++++++++++++++++++++++++++++++++
 24 files changed, 64 insertions(+), 247 deletions(-)
 mode change 100644 => 100755 arch/arm/boot/install.sh
 mode change 100644 => 100755 arch/arm64/boot/install.sh
 mode change 100644 => 100755 arch/ia64/install.sh
 mode change 100644 => 100755 arch/m68k/install.sh
 mode change 100644 => 100755 arch/nios2/boot/install.sh
 mode change 100644 => 100755 arch/parisc/install.sh
 mode change 100644 => 100755 arch/powerpc/boot/install.sh
 mode change 100644 => 100755 arch/riscv/boot/install.sh
 mode change 100644 => 100755 arch/s390/boot/install.sh
 mode change 100644 => 100755 arch/sparc/boot/install.sh
 mode change 100644 => 100755 arch/x86/boot/install.sh
 create mode 100755 scripts/install.sh
Makefile +0 -0
index 9a60f732bb3c..154c32af8805 100644
@@ -1298,7 +1298,8 @@ scripts_unifdef: scripts_basic
 # to this Makefile to build and install external modules.
 # Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
 
Quoted 6 lines

Makefile scripts_unifdef: scripts_basic · line 1302

Quoted 3 lines
Makefile +2 -1
-install: sub_make_done :=
+quiet_cmd_install = INSTALL $(INSTALL_PATH)
+      cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh

This is the third 'cmd_install' in the tree; might it be better to take a more unique name (e.g. cmd_installkernel) to prevent confusion?

If this is confusing, we can rename the ones in
scripts/Makefile.{modinst,headersinst}.

This command name matches the build target ("make install"), so I believe this name is good.

Quoted 9 lines

For me, it would have been more clear, if we'd also move the default KBUILD_IMAGE definition here (similar to the corresponding part in arch/parisc/Makefile):

zinstall: KBUILD_IMAGE := $(boot)/Image.gz

($(KBUILD_IMAGE) seems not to be used anywhere else in arch/arm64/ tree; but I haven't checked in depth.)

KBUILD_IMAGE is _indirectly_ used to specify
the kernel image for package builds. [1]

This target returns the value IMAGE_BUILD. [2]

$(KBUILD_IMAGE) is definitely used for arm64.

[1]: https://github.com/torvalds/linux/blob/v5.17/scripts/package/builddeb#L150
[2]: https://github.com/torvalds/linux/blob/v5.17/Makefile#L1943

Quoted 12 lines
Quoted 12 lines
arch/parisc/Makefile +0 -4
index 7583fc39ab2d..aca1710fd658 100644
@@ -184,12 +184,11 @@ vdso_install:
      $(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso $@
      $(if $(CONFIG_COMPAT_VDSO), \
              $(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 $@)
-install:
-     $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
-                     $(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
-zinstall:
Quoted 8 lines

arch/parisc/Makefile vdso_install: · line 189

Quoted 5 lines
arch/parisc/Makefile +3 -2
-     $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
-                     $(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
+
+install: KBUILD_IMAGE := vmlinux
+zinstall: KBUILD_IMAGE := vmlinuz

Does this make the KBUILD_IMAGE definition in line 19 obsolete and unused?

As I said above for arm64, KBUILD_IMAGE is used for package builds.

If you delete line 19, it will change the behavior. (fall back to the global default [3])

[3]: https://github.com/torvalds/linux/blob/v5.17/Makefile#L1059

Quoted 11 lines

arch/powerpc/Makefile endef · line 410

Quoted 8 lines
arch/powerpc/Makefile +0 -0
index eb541e730d3c..45a9caa37b4e 100644
@@ -408,8 +408,7 @@ endef
 
 PHONY += install
 install:

I can't find a KBUILD_IMAGE definition in arch/powerpc/Makefile. Should it be set here as a target-specific varibable, too?

Right, powerpc does not define KBUILD_IMAGE explicitly. It falls back to [3].

Signature · 2 lines
Best Regards
Masahiro Yamada
Reviewed-by
#3 lore raw
Quoted 156 lines · Masahiro Yamada
Quoted 65 lines · Nicolas Schier
Quoted 63 lines · On Tue, 3 May 2022 11:47 +0900 Masahiro Yamada wrote:

Many architectures have similar install.sh scripts.

The first half is really generic; verifies that the kernel image and System.map exist, then executes ~/bin/${INSTALLKERNEL} or /sbin/${INSTALLKERNEL} if available.

The second half is kind of arch-specific. It just copies the kernel image and System.map to the destination, but the code is slightly different.

This patch factors out the generic part into scripts/install.sh.

---

Changes in v2:
- Move the installkernel parameters to scripts/install.sh

 Makefile                     |  3 ++-
 arch/arm/Makefile            |  4 ++--
 arch/arm/boot/install.sh     | 21 ------------------
 arch/arm64/Makefile          |  6 ++----
 arch/arm64/boot/install.sh   | 21 ------------------
 arch/ia64/Makefile           |  3 ++-
 arch/ia64/install.sh         | 10 ---------
 arch/m68k/Makefile           |  3 ++-
 arch/m68k/install.sh         | 22 -------------------
 arch/nios2/Makefile          |  3 +--
 arch/nios2/boot/install.sh   | 22 -------------------
 arch/parisc/Makefile         | 11 +++++-----
 arch/parisc/install.sh       | 28 ------------------------
 arch/powerpc/Makefile        |  3 +--
 arch/powerpc/boot/install.sh | 23 --------------------
 arch/riscv/Makefile          |  7 +++---
 arch/riscv/boot/install.sh   | 21 ------------------
 arch/s390/Makefile           |  3 +--
 arch/s390/boot/install.sh    |  6 ------
 arch/sparc/Makefile          |  3 +--
 arch/sparc/boot/install.sh   | 22 -------------------
 arch/x86/Makefile            |  3 +--
 arch/x86/boot/install.sh     | 22 -------------------
 scripts/install.sh           | 41 ++++++++++++++++++++++++++++++++++++
 24 files changed, 64 insertions(+), 247 deletions(-)
 mode change 100644 => 100755 arch/arm/boot/install.sh
 mode change 100644 => 100755 arch/arm64/boot/install.sh
 mode change 100644 => 100755 arch/ia64/install.sh
 mode change 100644 => 100755 arch/m68k/install.sh
 mode change 100644 => 100755 arch/nios2/boot/install.sh
 mode change 100644 => 100755 arch/parisc/install.sh
 mode change 100644 => 100755 arch/powerpc/boot/install.sh
 mode change 100644 => 100755 arch/riscv/boot/install.sh
 mode change 100644 => 100755 arch/s390/boot/install.sh
 mode change 100644 => 100755 arch/sparc/boot/install.sh
 mode change 100644 => 100755 arch/x86/boot/install.sh
 create mode 100755 scripts/install.sh
Makefile +0 -0
index 9a60f732bb3c..154c32af8805 100644
@@ -1298,7 +1298,8 @@ scripts_unifdef: scripts_basic
 # to this Makefile to build and install external modules.
 # Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
 
Quoted 6 lines

Makefile scripts_unifdef: scripts_basic · line 1302

Quoted 3 lines
Makefile +2 -1
-install: sub_make_done :=
+quiet_cmd_install = INSTALL $(INSTALL_PATH)
+      cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh

This is the third 'cmd_install' in the tree; might it be better to take a more unique name (e.g. cmd_installkernel) to prevent confusion?

If this is confusing, we can rename the ones in
scripts/Makefile.{modinst,headersinst}.

This command name matches the build target ("make install"), so I believe this name is good.

Quoted 9 lines

For me, it would have been more clear, if we'd also move the default KBUILD_IMAGE definition here (similar to the corresponding part in arch/parisc/Makefile):

zinstall: KBUILD_IMAGE := $(boot)/Image.gz

($(KBUILD_IMAGE) seems not to be used anywhere else in arch/arm64/ tree; but I haven't checked in depth.)

KBUILD_IMAGE is _indirectly_ used to specify
the kernel image for package builds. [1]

This target returns the value IMAGE_BUILD. [2]

$(KBUILD_IMAGE) is definitely used for arm64.

[1]: https://github.com/torvalds/linux/blob/v5.17/scripts/package/builddeb#L150
[2]: https://github.com/torvalds/linux/blob/v5.17/Makefile#L1943

Quoted 12 lines
Quoted 12 lines
arch/parisc/Makefile +0 -4
index 7583fc39ab2d..aca1710fd658 100644
@@ -184,12 +184,11 @@ vdso_install:
      $(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso $@
      $(if $(CONFIG_COMPAT_VDSO), \
              $(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 $@)
-install:
-     $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
-                     $(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
-zinstall:
Quoted 8 lines

arch/parisc/Makefile vdso_install: · line 189

Quoted 5 lines
arch/parisc/Makefile +3 -2
-     $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
-                     $(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
+
+install: KBUILD_IMAGE := vmlinux
+zinstall: KBUILD_IMAGE := vmlinuz

Does this make the KBUILD_IMAGE definition in line 19 obsolete and unused?

As I said above for arm64, KBUILD_IMAGE is used for package builds.

If you delete line 19, it will change the behavior. (fall back to the global default [3])

[3]: https://github.com/torvalds/linux/blob/v5.17/Makefile#L1059

Quoted 11 lines

arch/powerpc/Makefile endef · line 410

Quoted 8 lines
arch/powerpc/Makefile +0 -0
index eb541e730d3c..45a9caa37b4e 100644
@@ -408,8 +408,7 @@ endef
 
 PHONY += install
 install:

I can't find a KBUILD_IMAGE definition in arch/powerpc/Makefile. Should it be set here as a target-specific varibable, too?

Quoted 3 lines

Right, powerpc does not define KBUILD_IMAGE explicitly. It falls back to [3].

Thanks for all those illuming clarifications, I have nothing more to ask.