Skip to contentSkip to conversation

x86/sgx: Set active memcg prior to shmem allocation

PATCH Superseded Kristen Carlson Accardi 5 participants 8 messages May 19, 2022 – May 20, 2022

Subsystems (4)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 x86/sgx: Set active memcg prior to shmem allocation

When the system runs out of enclave memory, SGX can reclaim EPC pages by swapping to normal RAM. These backing pages are allocated via a per-enclave shared memory area. Since SGX allows unlimited over commit on EPC memory, the reclaimer thread can allocate a large number of backing RAM pages in response to EPC memory pressure.

When the shared memory backing RAM allocation occurs during the reclaimer thread context, the shared memory is charged to the root memory control group, and the shmem usage of the enclave is not properly accounted for, making cgroups ineffective at limiting the amount of RAM an enclave can consume.

For example, when using a cgroup to launch a set of test enclaves, the kernel does not properly account for 50% - 75% of shmem page allocations on average. In the worst case, when nearly all allocations occur during the reclaimer thread, the kernel accounts less than a percent of the amount of shmem used by the enclave's cgroup to the correct cgroup.

SGX stores a list of mm_structs that are associated with an enclave. Pick one of them during reclaim and charge that mm's memcg with the shmem allocation. The one that gets picked is arbitrary, but this list almost always only has one mm. The cases where there is more than one mm with different memcg's are not worth considering.

Create a new function - sgx_encl_alloc_backing(). This function is used whenever a new backing storage page needs to be allocated. Previously the same function was used for page allocation as well as retrieving a previously allocated page. Prior to backing page allocation, if there is a mm_struct associated with the enclave that is requesting the allocation, it is set as the active memory control group.

---
V1 -> V2:
Changed sgx_encl_set_active_memcg() to simply return the correct memcg for the enclave and renamed to sgx_encl_get_mem_cgroup().

Created helper function current_is_ksgxd() to improve readability.

Use mmget_not_zero()/mmput_async() when searching mm_list.

Move call to set_active_memcg() to sgx_encl_alloc_backing() and use mem_cgroup_put() to avoid leaking a memcg reference.

Address review feedback regarding comments and commit log.

 arch/x86/kernel/cpu/sgx/encl.c | 109 ++++++++++++++++++++++++++++++++-
 arch/x86/kernel/cpu/sgx/encl.h |  11 +++-
 arch/x86/kernel/cpu/sgx/main.c |   4 +-
 3 files changed, 118 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/sgx/encl.c +107 -2
index 001808e3901c..6d10202612d6 100644
@@ -32,7 +32,7 @@ static int __sgx_encl_eldu(struct sgx_encl_page *encl_page,
 	else
 		page_index = PFN_DOWN(encl->size);
 
-	ret = sgx_encl_get_backing(encl, page_index, &b);
+	ret = sgx_encl_lookup_backing(encl, page_index, &b);
 	if (ret)
 		return ret;
 
@@ -574,7 +574,7 @@ static struct page *sgx_encl_get_backing_page(struct sgx_encl *encl,
  *   0 on success,
  *   -errno otherwise.
  */
-int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
+static int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
 			 struct sgx_backing *backing)
 {
 	pgoff_t pcmd_index = PFN_DOWN(encl->size) + 1 + (page_index >> 5);
@@ -601,6 +601,111 @@ int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
 	return 0;
 }
 
+/*
+ * When called from ksgxd, returns the mem_cgroup of a struct mm stored
+ * in the enclave's mm_list. When not called from ksgxd, just returns
+ * the mem_cgroup of the current task.
+ */
+static struct mem_cgroup *sgx_encl_get_mem_cgroup(struct sgx_encl *encl)
+{
+	struct mem_cgroup *memcg = NULL;
+	struct sgx_encl_mm *encl_mm;
+	int idx;
+
+	/*
+	 * If called from normal task context, return the mem_cgroup
+	 * of the current task's mm. The remainder of the handling is for
+	 * ksgxd.
+	 */
+	if (!current_is_ksgxd())
+		return get_mem_cgroup_from_mm(current->mm);
+
+	/*
+	 * Search the enclave's mm_list to find an mm associated with
+	 * this enclave to charge the allocation to.
+	 */
+	idx = srcu_read_lock(&encl->srcu);
+
+	list_for_each_entry_rcu(encl_mm, &encl->mm_list, list) {
+		if (!mmget_not_zero(encl_mm->mm))
+			continue;
+
+		memcg = get_mem_cgroup_from_mm(encl_mm->mm);
+
+		mmput_async(encl_mm->mm);
+
+		break;
+	}
+
+	srcu_read_unlock(&encl->srcu, idx);
+
+	/*
+	 * In the rare case that there isn't an mm associated with
+	 * the enclave, set memcg to the current active mem_cgroup.
+	 * This will be the root mem_cgroup if there is no active
+	 * mem_cgroup.
+	 */
+	if (!memcg)
+		return get_mem_cgroup_from_mm(NULL);
+
+	return memcg;
+}
+
+/**
+ * sgx_encl_alloc_backing() - allocate a new backing storage page
+ * @encl:	an enclave pointer
+ * @page_index:	enclave page index
+ * @backing:	data for accessing backing storage for the page
+ *
+ * When called from ksgxd, sets the active memcg from one of the
+ * mms in the enclave's mm_list prior to any backing page allocation,
+ * in order to ensure that shmem page allocations are charged to the
+ * enclave.
+ *
+ * Return:
+ *   0 on success,
+ *   -errno otherwise.
+ */
+int sgx_encl_alloc_backing(struct sgx_encl *encl, unsigned long page_index,
+			   struct sgx_backing *backing)
+{
+	struct mem_cgroup *memcg, *old_memcg;
+	int ret;
+
+	memcg = sgx_encl_get_mem_cgroup(encl);
+
+	old_memcg = set_active_memcg(memcg);
+
+	ret = sgx_encl_get_backing(encl, page_index, backing);
+
+	set_active_memcg(old_memcg);
+
+	mem_cgroup_put(memcg);
+
+	return ret;
+}
+
+/**
+ * sgx_encl_lookup_backing() - retrieve an existing backing storage page
+ * @encl:	an enclave pointer
+ * @page_index:	enclave page index
+ * @backing:	data for accessing backing storage for the page
+ *
+ * Retrieve a backing page for loading data back into an EPC page with ELDU.
+ * It is the caller's responsibility to ensure that it is appropriate to use
+ * sgx_encl_lookup_backing() rather than sgx_encl_alloc_backing(). If lookup is
+ * not used correctly, this will cause an allocation which is not accounted for.
+ *
+ * Return:
+ *   0 on success,
+ *   -errno otherwise.
+ */
+int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long page_index,
+			   struct sgx_backing *backing)
+{
+	return sgx_encl_get_backing(encl, page_index, backing);
+}
+
 /**
  * sgx_encl_put_backing() - Unpin the backing storage
  * @backing:	data for accessing backing storage for the page
arch/x86/kernel/cpu/sgx/encl.h +9 -2
index fec43ca65065..2de3b150ab00 100644
@@ -100,13 +100,20 @@ static inline int sgx_encl_find(struct mm_struct *mm, unsigned long addr,
 	return 0;
 }
 
+static inline bool current_is_ksgxd(void)
+{
+	return current->mm ? false : true;
+}
+
 int sgx_encl_may_map(struct sgx_encl *encl, unsigned long start,
 		     unsigned long end, unsigned long vm_flags);
 
 void sgx_encl_release(struct kref *ref);
 int sgx_encl_mm_add(struct sgx_encl *encl, struct mm_struct *mm);
-int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
-			 struct sgx_backing *backing);
+int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long page_index,
+			    struct sgx_backing *backing);
+int sgx_encl_alloc_backing(struct sgx_encl *encl, unsigned long page_index,
+			   struct sgx_backing *backing);
 void sgx_encl_put_backing(struct sgx_backing *backing, bool do_write);
 int sgx_encl_test_and_clear_young(struct mm_struct *mm,
 				  struct sgx_encl_page *page);
arch/x86/kernel/cpu/sgx/main.c +2 -2
index 4b41efc9e367..7d41c8538795 100644
@@ -310,7 +310,7 @@ static void sgx_reclaimer_write(struct sgx_epc_page *epc_page,
 	encl->secs_child_cnt--;
 
 	if (!encl->secs_child_cnt && test_bit(SGX_ENCL_INITIALIZED, &encl->flags)) {
-		ret = sgx_encl_get_backing(encl, PFN_DOWN(encl->size),
+		ret = sgx_encl_alloc_backing(encl, PFN_DOWN(encl->size),
 					   &secs_backing);
 		if (ret)
 			goto out;
@@ -381,7 +381,7 @@ static void sgx_reclaim_pages(void)
 			goto skip;
 
 		page_index = PFN_DOWN(encl_page->desc - encl_page->encl->base);
-		ret = sgx_encl_get_backing(encl_page->encl, page_index, &backing[i]);
+		ret = sgx_encl_alloc_backing(encl_page->encl, page_index, &backing[i]);
 		if (ret)
 			goto skip;
 
Signature · 1 line
2.20.1
Reviewed-by on v2 1/1
#1 lore raw
Quoted 35 lines · Kristen Carlson Accardi

When the system runs out of enclave memory, SGX can reclaim EPC pages by swapping to normal RAM. These backing pages are allocated via a per-enclave shared memory area. Since SGX allows unlimited over commit on EPC memory, the reclaimer thread can allocate a large number of backing RAM pages in response to EPC memory pressure.

When the shared memory backing RAM allocation occurs during the reclaimer thread context, the shared memory is charged to the root memory control group, and the shmem usage of the enclave is not properly accounted for, making cgroups ineffective at limiting the amount of RAM an enclave can consume.

For example, when using a cgroup to launch a set of test enclaves, the kernel does not properly account for 50% - 75% of shmem page allocations on average. In the worst case, when nearly all allocations occur during the reclaimer thread, the kernel accounts less than a percent of the amount of shmem used by the enclave's cgroup to the correct cgroup.

SGX stores a list of mm_structs that are associated with an enclave. Pick one of them during reclaim and charge that mm's memcg with the shmem allocation. The one that gets picked is arbitrary, but this list almost always only has one mm. The cases where there is more than one mm with different memcg's are not worth considering.

Create a new function - sgx_encl_alloc_backing(). This function is used whenever a new backing storage page needs to be allocated. Previously the same function was used for page allocation as well as retrieving a previously allocated page. Prior to backing page allocation, if there is a mm_struct associated with the enclave that is requesting the allocation, it is set as the active memory control group.

Quoted 1 line

For the memcg part:

#2 lore raw
Quoted 38 lines · Shakeel Butt
Quoted 36 lines · Kristen Carlson Accardi

When the system runs out of enclave memory, SGX can reclaim EPC pages
by swapping to normal RAM. These backing pages are allocated via a per-enclave shared memory area. Since SGX allows unlimited over commit on EPC memory, the reclaimer thread can allocate a large number of backing RAM pages in response to EPC memory pressure.

When the shared memory backing RAM allocation occurs during the reclaimer thread context, the shared memory is charged to the root memory control group, and the shmem usage of the enclave is not properly accounted for, making cgroups ineffective at limiting the amount of RAM an enclave can consume.

For example, when using a cgroup to launch a set of test enclaves, the kernel does not properly account for 50% - 75% of shmem page allocations on average. In the worst case, when nearly all allocations occur during the reclaimer thread, the kernel accounts less than a percent of the amount of shmem used by the enclave's cgroup to the correct cgroup.

SGX stores a list of mm_structs that are associated with an enclave. Pick one of them during reclaim and charge that mm's memcg with the shmem allocation. The one that gets picked is arbitrary, but this list almost always only has one mm. The cases where there is more than one mm with different memcg's are not worth considering.

Create a new function - sgx_encl_alloc_backing(). This function is used whenever a new backing storage page needs to be allocated. Previously the same function was used for page allocation as well as retrieving a previously allocated page. Prior to backing page allocation, if there is a mm_struct associated
with the enclave that is requesting the allocation, it is set as the active memory control group.

Quoted 5 lines
Quoted 1 line

For the memcg part:

Thanks!

maintainer
#3 lore raw
In reply to Kristen Carlson Accardi
Quoted 150 lines · Kristen Carlson Accardi

When the system runs out of enclave memory, SGX can reclaim EPC pages by swapping to normal RAM. These backing pages are allocated via a per-enclave shared memory area. Since SGX allows unlimited over commit on EPC memory, the reclaimer thread can allocate a large number of backing RAM pages in response to EPC memory pressure.

When the shared memory backing RAM allocation occurs during the reclaimer thread context, the shared memory is charged to the root memory control group, and the shmem usage of the enclave is not properly accounted for, making cgroups ineffective at limiting the amount of RAM an enclave can consume.

For example, when using a cgroup to launch a set of test enclaves, the kernel does not properly account for 50% - 75% of shmem page allocations on average. In the worst case, when nearly all allocations occur during the reclaimer thread, the kernel accounts less than a percent of the amount of shmem used by the enclave's cgroup to the correct cgroup.

SGX stores a list of mm_structs that are associated with an enclave. Pick one of them during reclaim and charge that mm's memcg with the shmem allocation. The one that gets picked is arbitrary, but this list almost always only has one mm. The cases where there is more than one mm with different memcg's are not worth considering.

Create a new function - sgx_encl_alloc_backing(). This function is used whenever a new backing storage page needs to be allocated. Previously the same function was used for page allocation as well as retrieving a previously allocated page. Prior to backing page allocation, if there is a mm_struct associated with the enclave that is requesting the allocation, it is set as the active memory control group.

---
V1 -> V2:
Changed sgx_encl_set_active_memcg() to simply return the correct memcg for the enclave and renamed to sgx_encl_get_mem_cgroup().

Created helper function current_is_ksgxd() to improve readability.

Use mmget_not_zero()/mmput_async() when searching mm_list.

Move call to set_active_memcg() to sgx_encl_alloc_backing() and use mem_cgroup_put() to avoid leaking a memcg reference.

Address review feedback regarding comments and commit log.

 arch/x86/kernel/cpu/sgx/encl.c | 109 ++++++++++++++++++++++++++++++++-
 arch/x86/kernel/cpu/sgx/encl.h |  11 +++-
 arch/x86/kernel/cpu/sgx/main.c |   4 +-
 3 files changed, 118 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/sgx/encl.c +72 -2
index 001808e3901c..6d10202612d6 100644
@@ -32,7 +32,7 @@ static int __sgx_encl_eldu(struct sgx_encl_page *encl_page,
 	else
 		page_index = PFN_DOWN(encl->size);
 
-	ret = sgx_encl_get_backing(encl, page_index, &b);
+	ret = sgx_encl_lookup_backing(encl, page_index, &b);
 	if (ret)
 		return ret;
 
@@ -574,7 +574,7 @@ static struct page *sgx_encl_get_backing_page(struct sgx_encl *encl,
  *   0 on success,
  *   -errno otherwise.
  */
-int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
+static int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
 			 struct sgx_backing *backing)
 {
 	pgoff_t pcmd_index = PFN_DOWN(encl->size) + 1 + (page_index >> 5);
@@ -601,6 +601,111 @@ int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
 	return 0;
 }
 
+/*
+ * When called from ksgxd, returns the mem_cgroup of a struct mm stored
+ * in the enclave's mm_list. When not called from ksgxd, just returns
+ * the mem_cgroup of the current task.
+ */
+static struct mem_cgroup *sgx_encl_get_mem_cgroup(struct sgx_encl *encl)
+{
+	struct mem_cgroup *memcg = NULL;
+	struct sgx_encl_mm *encl_mm;
+	int idx;
+
+	/*
+	 * If called from normal task context, return the mem_cgroup
+	 * of the current task's mm. The remainder of the handling is for
+	 * ksgxd.
+	 */
+	if (!current_is_ksgxd())
+		return get_mem_cgroup_from_mm(current->mm);
+
+	/*
+	 * Search the enclave's mm_list to find an mm associated with
+	 * this enclave to charge the allocation to.
+	 */
+	idx = srcu_read_lock(&encl->srcu);
+
+	list_for_each_entry_rcu(encl_mm, &encl->mm_list, list) {
+		if (!mmget_not_zero(encl_mm->mm))
+			continue;
+
+		memcg = get_mem_cgroup_from_mm(encl_mm->mm);
+
+		mmput_async(encl_mm->mm);
+
+		break;
+	}
+
+	srcu_read_unlock(&encl->srcu, idx);
+
+	/*
+	 * In the rare case that there isn't an mm associated with
+	 * the enclave, set memcg to the current active mem_cgroup.
+	 * This will be the root mem_cgroup if there is no active
+	 * mem_cgroup.
+	 */
+	if (!memcg)
+		return get_mem_cgroup_from_mm(NULL);
+
+	return memcg;
+}
+
+/**
+ * sgx_encl_alloc_backing() - allocate a new backing storage page
+ * @encl:	an enclave pointer
+ * @page_index:	enclave page index
+ * @backing:	data for accessing backing storage for the page
+ *
+ * When called from ksgxd, sets the active memcg from one of the
+ * mms in the enclave's mm_list prior to any backing page allocation,
+ * in order to ensure that shmem page allocations are charged to the
+ * enclave.
+ *
+ * Return:
+ *   0 on success,
+ *   -errno otherwise.
+ */
+int sgx_encl_alloc_backing(struct sgx_encl *encl, unsigned long page_index,
+			   struct sgx_backing *backing)
+{
+	struct mem_cgroup *memcg, *old_memcg;
+	int ret;

arch/x86/kernel/cpu/sgx/encl.c int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index, · line 683

Quoted 10 lines
arch/x86/kernel/cpu/sgx/encl.c +10 -0
+
+	memcg = sgx_encl_get_mem_cgroup(encl);
+
+	old_memcg = set_active_memcg(memcg);
+
+	ret = sgx_encl_get_backing(encl, page_index, backing);
+
+	set_active_memcg(old_memcg);
+
+	mem_cgroup_put(memcg);

This is too sparse IMHO.

I would rewrite it as:

	struct mem_cgroup *encl_memcg = sgx_encl_get_mem_cgroup(encl);
	struct mem_cgroup *memcg = set_active_memcg(encl_memcg);
	int ret;

	ret = sgx_encl_get_backing(encl, page_index, backing);

	set_active_memcg(memcg);
	mem_cgroup_put(encl_memcg);

I think old_memcg is not very documentative, whereas this also dclearly tells what is going on: enclave's memcg is temporarily swapped in order to perform page allocation, so that the allocations gets accounted from them correct cgroup.

Quoted 80 lines
arch/x86/kernel/cpu/sgx/encl.c +25 -0
+
+	return ret;
+}
+
+/**
+ * sgx_encl_lookup_backing() - retrieve an existing backing storage page
+ * @encl:	an enclave pointer
+ * @page_index:	enclave page index
+ * @backing:	data for accessing backing storage for the page
+ *
+ * Retrieve a backing page for loading data back into an EPC page with ELDU.
+ * It is the caller's responsibility to ensure that it is appropriate to use
+ * sgx_encl_lookup_backing() rather than sgx_encl_alloc_backing(). If lookup is
+ * not used correctly, this will cause an allocation which is not accounted for.
+ *
+ * Return:
+ *   0 on success,
+ *   -errno otherwise.
+ */
+int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long page_index,
+			   struct sgx_backing *backing)
+{
+	return sgx_encl_get_backing(encl, page_index, backing);
+}
+
 /**
  * sgx_encl_put_backing() - Unpin the backing storage
  * @backing:	data for accessing backing storage for the page
arch/x86/kernel/cpu/sgx/encl.h +9 -2
index fec43ca65065..2de3b150ab00 100644
@@ -100,13 +100,20 @@ static inline int sgx_encl_find(struct mm_struct *mm, unsigned long addr,
 	return 0;
 }
 
+static inline bool current_is_ksgxd(void)
+{
+	return current->mm ? false : true;
+}
+
 int sgx_encl_may_map(struct sgx_encl *encl, unsigned long start,
 		     unsigned long end, unsigned long vm_flags);
 
 void sgx_encl_release(struct kref *ref);
 int sgx_encl_mm_add(struct sgx_encl *encl, struct mm_struct *mm);
-int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
-			 struct sgx_backing *backing);
+int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long page_index,
+			    struct sgx_backing *backing);
+int sgx_encl_alloc_backing(struct sgx_encl *encl, unsigned long page_index,
+			   struct sgx_backing *backing);
 void sgx_encl_put_backing(struct sgx_backing *backing, bool do_write);
 int sgx_encl_test_and_clear_young(struct mm_struct *mm,
 				  struct sgx_encl_page *page);
arch/x86/kernel/cpu/sgx/main.c +2 -2
index 4b41efc9e367..7d41c8538795 100644
@@ -310,7 +310,7 @@ static void sgx_reclaimer_write(struct sgx_epc_page *epc_page,
 	encl->secs_child_cnt--;
 
 	if (!encl->secs_child_cnt && test_bit(SGX_ENCL_INITIALIZED, &encl->flags)) {
-		ret = sgx_encl_get_backing(encl, PFN_DOWN(encl->size),
+		ret = sgx_encl_alloc_backing(encl, PFN_DOWN(encl->size),
 					   &secs_backing);
 		if (ret)
 			goto out;
@@ -381,7 +381,7 @@ static void sgx_reclaim_pages(void)
 			goto skip;
 
 		page_index = PFN_DOWN(encl_page->desc - encl_page->encl->base);
-		ret = sgx_encl_get_backing(encl_page->encl, page_index, &backing[i]);
+		ret = sgx_encl_alloc_backing(encl_page->encl, page_index, &backing[i]);
 		if (ret)
 			goto skip;
 
Signature · 1 line
2.20.1

BR, Jarkko

#4 lore raw
Quoted 193 lines · Jarkko Sakkinen
Quoted 167 lines · Kristen Carlson Accardi

When the system runs out of enclave memory, SGX can reclaim EPC pages
by swapping to normal RAM. These backing pages are allocated via a per-enclave shared memory area. Since SGX allows unlimited over commit on EPC memory, the reclaimer thread can allocate a large number of backing RAM pages in response to EPC memory pressure.

When the shared memory backing RAM allocation occurs during the reclaimer thread context, the shared memory is charged to the root memory control group, and the shmem usage of the enclave is not properly accounted for, making cgroups ineffective at limiting the amount of RAM an enclave can consume.

For example, when using a cgroup to launch a set of test enclaves, the kernel does not properly account for 50% - 75% of shmem page allocations on average. In the worst case, when nearly all allocations occur during the reclaimer thread, the kernel accounts less than a percent of the amount of shmem used by the enclave's cgroup to the correct cgroup.

SGX stores a list of mm_structs that are associated with an enclave. Pick one of them during reclaim and charge that mm's memcg with the shmem allocation. The one that gets picked is arbitrary, but this list almost always only has one mm. The cases where there is more than one mm with different memcg's are not worth considering.

Create a new function - sgx_encl_alloc_backing(). This function is used whenever a new backing storage page needs to be allocated. Previously the same function was used for page allocation as well as retrieving a previously allocated page. Prior to backing page allocation, if there is a mm_struct associated
with the enclave that is requesting the allocation, it is set as the active memory control group.

---
V1 -> V2:
Changed sgx_encl_set_active_memcg() to simply return the correct memcg for the enclave and renamed to sgx_encl_get_mem_cgroup().

Created helper function current_is_ksgxd() to improve readability.

Use mmget_not_zero()/mmput_async() when searching mm_list.

Move call to set_active_memcg() to sgx_encl_alloc_backing() and use mem_cgroup_put() to avoid leaking a memcg reference.

Address review feedback regarding comments and commit log.

 arch/x86/kernel/cpu/sgx/encl.c | 109
++++++++++++++++++++++++++++++++-
 arch/x86/kernel/cpu/sgx/encl.h |  11 +++-
 arch/x86/kernel/cpu/sgx/main.c |   4 +-
 3 files changed, 118 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/sgx/encl.c +2 -2
index 001808e3901c..6d10202612d6 100644
@@ -32,7 +32,7 @@ static int __sgx_encl_eldu(struct sgx_encl_page
 *encl_page,
 	else
 		page_index = PFN_DOWN(encl->size);
 
-	ret = sgx_encl_get_backing(encl, page_index, &b);
+	ret = sgx_encl_lookup_backing(encl, page_index, &b);
 	if (ret)
 		return ret;
@@ -574,7 +574,7 @@ static struct page
 *sgx_encl_get_backing_page(struct sgx_encl *encl,
  *   0 on success,
  *   -errno otherwise.
  */
-int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long
 page_index,
+static int sgx_encl_get_backing(struct sgx_encl *encl, unsigned
 long page_index,
arch/x86/kernel/cpu/sgx/encl.c +0 -0
 			 struct sgx_backing *backing)
 {
 	pgoff_t pcmd_index = PFN_DOWN(encl->size) + 1 + (page_index >>

5);

arch/x86/kernel/cpu/sgx/encl.c +2 -0
@@ -601,6 +601,111 @@ int sgx_encl_get_backing(struct sgx_encl
 *encl, unsigned long page_index,
 	return 0;
 }
 
+/*
+ * When called from ksgxd, returns the mem_cgroup of a struct mm

stored
+ * in the enclave's mm_list. When not called from ksgxd, just returns
+ * the mem_cgroup of the current task.
+ */
+static struct mem_cgroup *sgx_encl_get_mem_cgroup(struct sgx_encl *encl)

arch/x86/kernel/cpu/sgx/encl.c +8 -0
+{
+	struct mem_cgroup *memcg = NULL;
+	struct sgx_encl_mm *encl_mm;
+	int idx;
+
+	/*
+	 * If called from normal task context, return the mem_cgroup
+	 * of the current task's mm. The remainder of the handling is

for

arch/x86/kernel/cpu/sgx/encl.c +44 -0
+	 * ksgxd.
+	 */
+	if (!current_is_ksgxd())
+		return get_mem_cgroup_from_mm(current->mm);
+
+	/*
+	 * Search the enclave's mm_list to find an mm associated with
+	 * this enclave to charge the allocation to.
+	 */
+	idx = srcu_read_lock(&encl->srcu);
+
+	list_for_each_entry_rcu(encl_mm, &encl->mm_list, list) {
+		if (!mmget_not_zero(encl_mm->mm))
+			continue;
+
+		memcg = get_mem_cgroup_from_mm(encl_mm->mm);
+
+		mmput_async(encl_mm->mm);
+
+		break;
+	}
+
+	srcu_read_unlock(&encl->srcu, idx);
+
+	/*
+	 * In the rare case that there isn't an mm associated with
+	 * the enclave, set memcg to the current active mem_cgroup.
+	 * This will be the root mem_cgroup if there is no active
+	 * mem_cgroup.
+	 */
+	if (!memcg)
+		return get_mem_cgroup_from_mm(NULL);
+
+	return memcg;
+}
+
+/**
+ * sgx_encl_alloc_backing() - allocate a new backing storage page
+ * @encl:	an enclave pointer
+ * @page_index:	enclave page index
+ * @backing:	data for accessing backing storage for the page
+ *
+ * When called from ksgxd, sets the active memcg from one of the
+ * mms in the enclave's mm_list prior to any backing page

allocation,
+ * in order to ensure that shmem page allocations are charged to the
+ * enclave.
+ *
+ * Return:
+ * 0 on success,
+ * -errno otherwise.
+ */
+int sgx_encl_alloc_backing(struct sgx_encl *encl, unsigned long page_index,

arch/x86/kernel/cpu/sgx/encl.c +4 -0
+			   struct sgx_backing *backing)
+{
+	struct mem_cgroup *memcg, *old_memcg;
+	int ret;

arch/x86/kernel/cpu/sgx/encl.c int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index, · line 683

Quoted 10 lines
arch/x86/kernel/cpu/sgx/encl.c +10 -0
+
+	memcg = sgx_encl_get_mem_cgroup(encl);
+
+	old_memcg = set_active_memcg(memcg);
+
+	ret = sgx_encl_get_backing(encl, page_index, backing);
+
+	set_active_memcg(old_memcg);
+
+	mem_cgroup_put(memcg);

This is too sparse IMHO.

I would rewrite it as:

	struct mem_cgroup *encl_memcg = sgx_encl_get_mem_cgroup(encl);
	struct mem_cgroup *memcg = set_active_memcg(encl_memcg);
	int ret;

	ret = sgx_encl_get_backing(encl, page_index, backing);

	set_active_memcg(memcg);
	mem_cgroup_put(encl_memcg);
Quoted 7 lines

I think old_memcg is not very documentative, whereas this also dclearly
tells what is going on: enclave's memcg is temporarily swapped in order to
perform page allocation, so that the allocations gets accounted from them
correct cgroup.

Thanks for your feedback, I will incorporate it into v3.

--Kristen

Quoted 102 lines
Quoted 100 lines
arch/x86/kernel/cpu/sgx/encl.c +6 -0
+
+	return ret;
+}
+
+/**
+ * sgx_encl_lookup_backing() - retrieve an existing backing

storage page
+ * @encl: an enclave pointer
+ * @page_index: enclave page index
+ * @backing: data for accessing backing storage for the page
+ *
+ * Retrieve a backing page for loading data back into an EPC page with ELDU.
+ * It is the caller's responsibility to ensure that it is appropriate to use
+ * sgx_encl_lookup_backing() rather than sgx_encl_alloc_backing(). If lookup is
+ * not used correctly, this will cause an allocation which is not accounted for.
+ *
+ * Return:
+ * 0 on success,
+ * -errno otherwise.
+ */
+int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long page_index,

arch/x86/kernel/cpu/sgx/encl.c +5 -0
+			   struct sgx_backing *backing)
+{
+	return sgx_encl_get_backing(encl, page_index, backing);
+}
+
 /**
  * sgx_encl_put_backing() - Unpin the backing storage
  * @backing:	data for accessing backing storage for the page
arch/x86/kernel/cpu/sgx/encl.h +8 -2
index fec43ca65065..2de3b150ab00 100644
@@ -100,13 +100,20 @@ static inline int sgx_encl_find(struct
 mm_struct *mm, unsigned long addr,
 	return 0;
 }
 
+static inline bool current_is_ksgxd(void)
+{
+	return current->mm ? false : true;
+}
+
 int sgx_encl_may_map(struct sgx_encl *encl, unsigned long start,
 		     unsigned long end, unsigned long vm_flags);
 
 void sgx_encl_release(struct kref *ref);
 int sgx_encl_mm_add(struct sgx_encl *encl, struct mm_struct *mm);
-int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long
 page_index,
-			 struct sgx_backing *backing);
+int sgx_encl_lookup_backing(struct sgx_encl *encl, unsigned long
 page_index,
+			    struct sgx_backing *backing);
+int sgx_encl_alloc_backing(struct sgx_encl *encl, unsigned long

page_index,

arch/x86/kernel/cpu/sgx/encl.h +1 -0
+			   struct sgx_backing *backing);
 void sgx_encl_put_backing(struct sgx_backing *backing, bool

do_write);
int sgx_encl_test_and_clear_young(struct mm_struct *mm,

arch/x86/kernel/cpu/sgx/encl.h +0 -0
 				  struct sgx_encl_page *page);
arch/x86/kernel/cpu/sgx/main.c +1 -1
index 4b41efc9e367..7d41c8538795 100644
@@ -310,7 +310,7 @@ static void sgx_reclaimer_write(struct
 sgx_epc_page *epc_page,
 	encl->secs_child_cnt--;
 
 	if (!encl->secs_child_cnt && test_bit(SGX_ENCL_INITIALIZED,
 &encl->flags)) {
-		ret = sgx_encl_get_backing(encl, PFN_DOWN(encl->size),
+		ret = sgx_encl_alloc_backing(encl, PFN_DOWN(encl-
 >size),
arch/x86/kernel/cpu/sgx/main.c +1 -1
 					   &secs_backing);
 		if (ret)
 			goto out;
@@ -381,7 +381,7 @@ static void sgx_reclaim_pages(void)
 			goto skip;
 
 		page_index = PFN_DOWN(encl_page->desc - encl_page-
 >encl->base);
-		ret = sgx_encl_get_backing(encl_page->encl, page_index,
 &backing[i]);
+		ret = sgx_encl_alloc_backing(encl_page->encl,
 page_index, &backing[i]);
arch/x86/kernel/cpu/sgx/main.c +0 -0
 		if (ret)
 			goto skip;
Signature · 2 lines
-- 
2.20.1

BR, Jarkko

maintainer
#5 lore raw
In reply to Kristen Carlson Accardi
Quoted 40 lines · Kristen Carlson Accardi

When the system runs out of enclave memory, SGX can reclaim EPC pages by swapping to normal RAM. These backing pages are allocated via a per-enclave shared memory area. Since SGX allows unlimited over commit on EPC memory, the reclaimer thread can allocate a large number of backing RAM pages in response to EPC memory pressure.

When the shared memory backing RAM allocation occurs during the reclaimer thread context, the shared memory is charged to the root memory control group, and the shmem usage of the enclave is not properly accounted for, making cgroups ineffective at limiting the amount of RAM an enclave can consume.

For example, when using a cgroup to launch a set of test enclaves, the kernel does not properly account for 50% - 75% of shmem page allocations on average. In the worst case, when nearly all allocations occur during the reclaimer thread, the kernel accounts less than a percent of the amount of shmem used by the enclave's cgroup to the correct cgroup.

SGX stores a list of mm_structs that are associated with an enclave. Pick one of them during reclaim and charge that mm's memcg with the shmem allocation. The one that gets picked is arbitrary, but this list almost always only has one mm. The cases where there is more than one mm with different memcg's are not worth considering.

Create a new function - sgx_encl_alloc_backing(). This function is used whenever a new backing storage page needs to be allocated. Previously the same function was used for page allocation as well as retrieving a previously allocated page. Prior to backing page allocation, if there is a mm_struct associated with the enclave that is requesting the allocation, it is set as the active memory control group.

---
V1 -> V2:
Changed sgx_encl_set_active_memcg() to simply return the correct memcg for the enclave and renamed to sgx_encl_get_mem_cgroup().

Quoted 9 lines

Created helper function current_is_ksgxd() to improve readability.

Use mmget_not_zero()/mmput_async() when searching mm_list.

Move call to set_active_memcg() to sgx_encl_alloc_backing() and use mem_cgroup_put() to avoid leaking a memcg reference.

Address review feedback regarding comments and commit log.

<formletter>

This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

Acked-by on v2 1/1
#6 lore raw
In reply to Kristen Carlson Accardi
Quoted 119 lines · Kristen Carlson Accardi

When the system runs out of enclave memory, SGX can reclaim EPC pages by swapping to normal RAM. These backing pages are allocated via a per-enclave shared memory area. Since SGX allows unlimited over commit on EPC memory, the reclaimer thread can allocate a large number of backing RAM pages in response to EPC memory pressure.

When the shared memory backing RAM allocation occurs during the reclaimer thread context, the shared memory is charged to the root memory control group, and the shmem usage of the enclave is not properly accounted for, making cgroups ineffective at limiting the amount of RAM an enclave can consume.

For example, when using a cgroup to launch a set of test enclaves, the kernel does not properly account for 50% - 75% of shmem page allocations on average. In the worst case, when nearly all allocations occur during the reclaimer thread, the kernel accounts less than a percent of the amount of shmem used by the enclave's cgroup to the correct cgroup.

SGX stores a list of mm_structs that are associated with an enclave. Pick one of them during reclaim and charge that mm's memcg with the shmem allocation. The one that gets picked is arbitrary, but this list almost always only has one mm. The cases where there is more than one mm with different memcg's are not worth considering.

Create a new function - sgx_encl_alloc_backing(). This function is used whenever a new backing storage page needs to be allocated. Previously the same function was used for page allocation as well as retrieving a previously allocated page. Prior to backing page allocation, if there is a mm_struct associated with the enclave that is requesting the allocation, it is set as the active memory control group.

---
V1 -> V2:
Changed sgx_encl_set_active_memcg() to simply return the correct memcg for the enclave and renamed to sgx_encl_get_mem_cgroup().

Created helper function current_is_ksgxd() to improve readability.

Use mmget_not_zero()/mmput_async() when searching mm_list.

Move call to set_active_memcg() to sgx_encl_alloc_backing() and use mem_cgroup_put() to avoid leaking a memcg reference.

Address review feedback regarding comments and commit log.

 arch/x86/kernel/cpu/sgx/encl.c | 109 ++++++++++++++++++++++++++++++++-
 arch/x86/kernel/cpu/sgx/encl.h |  11 +++-
 arch/x86/kernel/cpu/sgx/main.c |   4 +-
 3 files changed, 118 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/sgx/encl.c +41 -2
index 001808e3901c..6d10202612d6 100644
@@ -32,7 +32,7 @@ static int __sgx_encl_eldu(struct sgx_encl_page *encl_page,
 	else
 		page_index = PFN_DOWN(encl->size);
 
-	ret = sgx_encl_get_backing(encl, page_index, &b);
+	ret = sgx_encl_lookup_backing(encl, page_index, &b);
 	if (ret)
 		return ret;
 
@@ -574,7 +574,7 @@ static struct page *sgx_encl_get_backing_page(struct sgx_encl *encl,
  *   0 on success,
  *   -errno otherwise.
  */
-int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
+static int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
 			 struct sgx_backing *backing)
 {
 	pgoff_t pcmd_index = PFN_DOWN(encl->size) + 1 + (page_index >> 5);
@@ -601,6 +601,111 @@ int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
 	return 0;
 }
 
+/*
+ * When called from ksgxd, returns the mem_cgroup of a struct mm stored
+ * in the enclave's mm_list. When not called from ksgxd, just returns
+ * the mem_cgroup of the current task.
+ */
+static struct mem_cgroup *sgx_encl_get_mem_cgroup(struct sgx_encl *encl)
+{
+	struct mem_cgroup *memcg = NULL;
+	struct sgx_encl_mm *encl_mm;
+	int idx;
+
+	/*
+	 * If called from normal task context, return the mem_cgroup
+	 * of the current task's mm. The remainder of the handling is for
+	 * ksgxd.
+	 */
+	if (!current_is_ksgxd())
+		return get_mem_cgroup_from_mm(current->mm);
+
+	/*
+	 * Search the enclave's mm_list to find an mm associated with
+	 * this enclave to charge the allocation to.
+	 */
+	idx = srcu_read_lock(&encl->srcu);
+
+	list_for_each_entry_rcu(encl_mm, &encl->mm_list, list) {
+		if (!mmget_not_zero(encl_mm->mm))
+			continue;
+
+		memcg = get_mem_cgroup_from_mm(encl_mm->mm);
+
+		mmput_async(encl_mm->mm);
+
+		break;
+	}
+
+	srcu_read_unlock(&encl->srcu, idx);
+
+	/*

arch/x86/kernel/cpu/sgx/encl.c int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index, · line 652

Quoted 10 lines
arch/x86/kernel/cpu/sgx/encl.c +10 -0
+	 * In the rare case that there isn't an mm associated with
+	 * the enclave, set memcg to the current active mem_cgroup.
+	 * This will be the root mem_cgroup if there is no active
+	 * mem_cgroup.
+	 */
+	if (!memcg)
+		return get_mem_cgroup_from_mm(NULL);
+
+	return memcg;
+}

You can simplify the function a bit. But it's up to you, not a strong opinion.

static struct mem_cgroup *sgx_encl_get_mem_cgroup(struct sgx_encl *encl)

{
	struct mem_cgroup *memcg = NULL;
	struct sgx_encl_mm *encl_mm;
	int idx;

	if (current_is_ksgxd()) {
		/*
		 * Search the enclave's mm_list to find an mm associated with
		 * this enclave to charge the allocation to.
		 */
		idx = srcu_read_lock(&encl->srcu);
		list_for_each_entry_rcu(encl_mm, &encl->mm_list, list) {
			if (!mmget_not_zero(encl_mm->mm))
				continue;

			memcg = get_mem_cgroup_from_mm(encl_mm->mm);
			mmput_async(encl_mm->mm);
			break;
		}
		srcu_read_unlock(&encl->srcu, idx);
	}

	return memcg ? memcg : get_mem_cgroup_from_mm(current->mm);
}

--

The rest of the patch looks good to me. Please, feel free to add:

Thanks!

#7 lore raw
Quoted 169 lines · Roman Gushchin
Quoted 133 lines · Kristen Carlson Accardi

When the system runs out of enclave memory, SGX can reclaim EPC pages
by swapping to normal RAM. These backing pages are allocated via a per-enclave shared memory area. Since SGX allows unlimited over commit on EPC memory, the reclaimer thread can allocate a large number of backing RAM pages in response to EPC memory pressure.

When the shared memory backing RAM allocation occurs during the reclaimer thread context, the shared memory is charged to the root memory control group, and the shmem usage of the enclave is not properly accounted for, making cgroups ineffective at limiting the amount of RAM an enclave can consume.

For example, when using a cgroup to launch a set of test enclaves, the kernel does not properly account for 50% - 75% of shmem page allocations on average. In the worst case, when nearly all allocations occur during the reclaimer thread, the kernel accounts less than a percent of the amount of shmem used by the enclave's cgroup to the correct cgroup.

SGX stores a list of mm_structs that are associated with an enclave. Pick one of them during reclaim and charge that mm's memcg with the shmem allocation. The one that gets picked is arbitrary, but this list almost always only has one mm. The cases where there is more than one mm with different memcg's are not worth considering.

Create a new function - sgx_encl_alloc_backing(). This function is used whenever a new backing storage page needs to be allocated. Previously the same function was used for page allocation as well as retrieving a previously allocated page. Prior to backing page allocation, if there is a mm_struct associated
with the enclave that is requesting the allocation, it is set as the active memory control group.

---
V1 -> V2:
Changed sgx_encl_set_active_memcg() to simply return the correct memcg for the enclave and renamed to sgx_encl_get_mem_cgroup().

Created helper function current_is_ksgxd() to improve readability.

Use mmget_not_zero()/mmput_async() when searching mm_list.

Move call to set_active_memcg() to sgx_encl_alloc_backing() and use mem_cgroup_put() to avoid leaking a memcg reference.

Address review feedback regarding comments and commit log.

 arch/x86/kernel/cpu/sgx/encl.c | 109
++++++++++++++++++++++++++++++++-
 arch/x86/kernel/cpu/sgx/encl.h |  11 +++-
 arch/x86/kernel/cpu/sgx/main.c |   4 +-
 3 files changed, 118 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/sgx/encl.c +2 -2
index 001808e3901c..6d10202612d6 100644
@@ -32,7 +32,7 @@ static int __sgx_encl_eldu(struct sgx_encl_page
 *encl_page,
 	else
 		page_index = PFN_DOWN(encl->size);
 
-	ret = sgx_encl_get_backing(encl, page_index, &b);
+	ret = sgx_encl_lookup_backing(encl, page_index, &b);
 	if (ret)
 		return ret;
@@ -574,7 +574,7 @@ static struct page
 *sgx_encl_get_backing_page(struct sgx_encl *encl,
  *   0 on success,
  *   -errno otherwise.
  */
-int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long
 page_index,
+static int sgx_encl_get_backing(struct sgx_encl *encl, unsigned
 long page_index,
arch/x86/kernel/cpu/sgx/encl.c +0 -0
 			 struct sgx_backing *backing)
 {
 	pgoff_t pcmd_index = PFN_DOWN(encl->size) + 1 + (page_index >>

5);

arch/x86/kernel/cpu/sgx/encl.c +2 -0
@@ -601,6 +601,111 @@ int sgx_encl_get_backing(struct sgx_encl
 *encl, unsigned long page_index,
 	return 0;
 }
 
+/*
+ * When called from ksgxd, returns the mem_cgroup of a struct mm

stored
+ * in the enclave's mm_list. When not called from ksgxd, just returns
+ * the mem_cgroup of the current task.
+ */
+static struct mem_cgroup *sgx_encl_get_mem_cgroup(struct sgx_encl *encl)

arch/x86/kernel/cpu/sgx/encl.c +8 -0
+{
+	struct mem_cgroup *memcg = NULL;
+	struct sgx_encl_mm *encl_mm;
+	int idx;
+
+	/*
+	 * If called from normal task context, return the mem_cgroup
+	 * of the current task's mm. The remainder of the handling is

for

arch/x86/kernel/cpu/sgx/encl.c +25 -0
+	 * ksgxd.
+	 */
+	if (!current_is_ksgxd())
+		return get_mem_cgroup_from_mm(current->mm);
+
+	/*
+	 * Search the enclave's mm_list to find an mm associated with
+	 * this enclave to charge the allocation to.
+	 */
+	idx = srcu_read_lock(&encl->srcu);
+
+	list_for_each_entry_rcu(encl_mm, &encl->mm_list, list) {
+		if (!mmget_not_zero(encl_mm->mm))
+			continue;
+
+		memcg = get_mem_cgroup_from_mm(encl_mm->mm);
+
+		mmput_async(encl_mm->mm);
+
+		break;
+	}
+
+	srcu_read_unlock(&encl->srcu, idx);
+
+	/*

arch/x86/kernel/cpu/sgx/encl.c int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index, · line 652

Quoted 10 lines
arch/x86/kernel/cpu/sgx/encl.c +10 -0
+	 * In the rare case that there isn't an mm associated with
+	 * the enclave, set memcg to the current active mem_cgroup.
+	 * This will be the root mem_cgroup if there is no active
+	 * mem_cgroup.
+	 */
+	if (!memcg)
+		return get_mem_cgroup_from_mm(NULL);
+
+	return memcg;
+}

You can simplify the function a bit. But it's up to you, not a strong opinion.

static struct mem_cgroup *sgx_encl_get_mem_cgroup(struct sgx_encl *encl)

{
	struct mem_cgroup *memcg = NULL;
	struct sgx_encl_mm *encl_mm;
	int idx;

	if (current_is_ksgxd()) {
		/*
		 * Search the enclave's mm_list to find an mm
associated with
		 * this enclave to charge the allocation to.
		 */
		idx = srcu_read_lock(&encl->srcu);
		list_for_each_entry_rcu(encl_mm, &encl->mm_list, list)
{
			if (!mmget_not_zero(encl_mm->mm))
				continue;

			memcg = get_mem_cgroup_from_mm(encl_mm->mm);
Quoted 9 lines
			mmput_async(encl_mm->mm);
			break;
		}
		srcu_read_unlock(&encl->srcu, idx);
	}

	return memcg ? memcg : get_mem_cgroup_from_mm(current->mm);
}

I don't have strong opinions on this either - I actually had it written this way originally but then decided maybe other people would find it more readable the other way. I definitely don't care either way.

Quoted 7 lines

--

The rest of the patch looks good to me. Please, feel free to add:

Thanks!

Thanks so much for your review, I will add this to v3.

Kristen