generic/556: Filter touch error message
PATCH v2 1/1 generic/556: Filter touch error message
Coreutils commit d435cfc0bc55 ("touch: fix wrong
diagnostic (Bug#48106)"), released in coreutils v9.0, changed the error reported by the tool when openat() fails with EINVAL. Instead of reporting a generic message for the failure of either openat() or the following utimensat(), it now differentiates both failures with different messages.
This change breaks generic/556, which relied on the parsing of that message. This test was originally developed by me on a Debian Buster (coreutils v8.x), so I used the generic error message. Now that I tried to run it on a more modern distro, it reports a different error message, which fails the test.
The patch filters out the touch-specific parts of the touch error messages, to prevent breakage from future changes, but preserves the return code information, which is actually useful (and more stable).
There is no change in behavior on the kernel side, just a broken test. On both older and new distros, the kernel correctly rejects this invalid sequence with -EINVAL, as shown in the strace hunk below:
...openat(AT_FDCWD, "/scratch_mnt/strict/corac\314\247\303", ...) = -1 EINVAL utimensat(AT_FDCWD, "/scratch_mnt/strict/corac\314\247\303", ...) = -1 EINVAL
...
Tested on Debian sid (coreutils v8.32) and Fedora (coreutils 9.0).
---
Changes since v1:
- Dont break on older distros
--- common/filter | 8 ++++++++ tests/generic/556 | 9 +++++++-- tests/generic/556.out | 4 ++-- 3 files changed, 17 insertions(+), 4 deletions(-)
common/filter +8 -0
@@ -478,6 +478,14 @@ _filter_stat() sed -e "s/\<cannot stat\>/cannot statx/" } +# touch v9.0+ modified part of the message printed on error. Filter the +# generic part out, but preserve the strerror() part, which is +# actually useful for debugging and usually stable. +_filter_touch() +{ + sed -e "s/.* '\(.*\)':\(.*\)/touch: '\1':\2/" +} + _filter_lostfound() { sed -e '/^lost+found$/d'
tests/generic/556 +7 -2
@@ -44,6 +44,11 @@ jp_file2=$(echo -e "japanese_\xe3\x82\xb1\xe3\x82\x99.txt") blob_file1=$(echo -e "corac\xcc\xa7\xc3") blob_file2=$(echo -e "coraç\xc3") +filter_touch() +{ + _filter_touch | _filter_scratch +} + # Test helpers basic_create_lookup() {
@@ -456,8 +461,8 @@ test_strict_mode_invalid_filename() # These creation commands should fail, since we are on strict # mode. - touch "${basedir}/${blob_file1}" 2>&1 | _filter_scratch - touch "${basedir}/${blob_file2}" 2>&1 | _filter_scratch + touch "${basedir}/${blob_file1}" 2>&1 | filter_touch + touch "${basedir}/${blob_file2}" 2>&1 | filter_touch } #############
tests/generic/556.out +2 -2
@@ -12,5 +12,5 @@ user.foo="bar" # file: SCRATCH_MNT/xattrs/x/f1 user.foo="bar" -touch: setting times of 'SCRATCH_MNT/strict/corac'$'\314\247\303': Invalid argument -touch: setting times of 'SCRATCH_MNT/strict/cora'$'\303\247\303': Invalid argument +touch: 'SCRATCH_MNT/strict/corac'$'\314\247\303': Invalid argument +touch: 'SCRATCH_MNT/strict/cora'$'\303\247\303': Invalid argument
Signature · 1 line
2.36.1
Quoted 21 lines · Gabriel Krisman Bertazi
Coreutils commit
d435cfc0bc55("touch: fix wrong
diagnostic (Bug#48106)"), released in coreutils v9.0, changed the error reported by the tool whenopenat()fails with EINVAL. Instead of reporting a generic message for the failure of eitheropenat()or the followingutimensat(), it now differentiates both failures with different messages.This change breaks generic/556, which relied on the parsing of that message. This test was originally developed by me on a Debian Buster (coreutils v8.x), so I used the generic error message. Now that I tried to run it on a more modern distro, it reports a different error message, which fails the test.
The patch filters out the touch-specific parts of the touch error messages, to prevent breakage from future changes, but preserves the return code information, which is actually useful (and more stable).
There is no change in behavior on the kernel side, just a broken test. On both older and new distros, the kernel correctly rejects this invalid sequence with
-EINVAL, as shown in the strace hunk below:
Quoted 8 lines
...
openat(AT_FDCWD, "/scratch_mnt/strict/corac\314\247\303", ...)= -1 EINVALutimensat(AT_FDCWD, "/scratch_mnt/strict/corac\314\247\303", ...)= -1 EINVAL
...Tested on Debian sid (coreutils v8.32) and Fedora (coreutils 9.0).
Signed-off-by Gabriel Krisman Bertazi <[email protected]>
Would you mind pasting the failure messages from 8.32 and 9.0 in the commit message so that it's a bit more obvious how things changed?
With that added,
--D
Quoted 71 lines
---
Changes since v1:
- Dont break on older distros--- common/filter | 8 ++++++++ tests/generic/556 | 9 +++++++-- tests/generic/556.out | 4 ++-- 3 files changed, 17 insertions(+), 4 deletions(-)common/filter +8
-0@@ -478,6 +478,14 @@ _filter_stat() sed -e "s/\<cannot stat\>/cannot statx/" } +# touch v9.0+ modified part of the message printed on error. Filter the +# generic part out, but preserve the strerror() part, which is +# actually useful for debugging and usually stable. +_filter_touch() +{ + sed -e "s/.* '\(.*\)':\(.*\)/touch: '\1':\2/" +} + _filter_lostfound() { sed -e '/^lost+found$/d'tests/generic/556 +7
-2@@ -44,6 +44,11 @@ jp_file2=$(echo -e "japanese_\xe3\x82\xb1\xe3\x82\x99.txt") blob_file1=$(echo -e "corac\xcc\xa7\xc3") blob_file2=$(echo -e "coraç\xc3") +filter_touch() +{ + _filter_touch | _filter_scratch +} + # Test helpers basic_create_lookup() {@@ -456,8 +461,8 @@ test_strict_mode_invalid_filename() # These creation commands should fail, since we are on strict # mode. - touch "${basedir}/${blob_file1}" 2>&1 | _filter_scratch - touch "${basedir}/${blob_file2}" 2>&1 | _filter_scratch + touch "${basedir}/${blob_file1}" 2>&1 | filter_touch + touch "${basedir}/${blob_file2}" 2>&1 | filter_touch } #############tests/generic/556.out +2
-2@@ -12,5 +12,5 @@ user.foo="bar" # file: SCRATCH_MNT/xattrs/x/f1 user.foo="bar" -touch: setting times of 'SCRATCH_MNT/strict/corac'$'\314\247\303': Invalid argument -touch: setting times of 'SCRATCH_MNT/strict/cora'$'\303\247\303': Invalid argument +touch: 'SCRATCH_MNT/strict/corac'$'\314\247\303': Invalid argument +touch: 'SCRATCH_MNT/strict/cora'$'\303\247\303': Invalid argumentSignature · 1 line
2.36.1