aspeed: Create SRAM name from first CPU index
PATCH 1/1 aspeed: Create SRAM name from first CPU index
To support multiple SoC's running simultaneously, we need a unique name for each RAM region. DRAM is created by the machine, but SRAM is created by the SoC, since in hardware it is part of the SoC's internals.
We need a way to uniquely identify each SRAM region though, for VM migration. Since each of the SoC's CPU's has an index which identifies it uniquely from other CPU's in the machine, we can use the index of any of the CPU's in the SoC to uniquely identify differentiate the SRAM name from other SoC SRAM's. In this change, I just elected to use the index of the first CPU in each SoC.
--- hw/arm/aspeed_ast10x0.c | 5 ++++- hw/arm/aspeed_ast2600.c | 5 +++-- hw/arm/aspeed_soc.c | 5 +++-- 3 files changed, 10 insertions(+), 5 deletions(-)
hw/arm/aspeed_ast10x0.c +4 -1
@@ -159,6 +159,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)DeviceState *armv7m;Error *err =NULL ;int i; +char name[64 ];if (!clock_has_source (s->sysclk)) {error_setg (errp,"sysclk clock must be wired up by the board code" );
@@ -183,7 +184,9 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)sysbus_realize (SYS_BUS_DEVICE (&s->armv7m), &error_abort);/* Internal SRAM */ -memory_region_init_ram (&s->sram,NULL ,"aspeed.sram" , sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" , +CPU (s->armv7m.cpu)->cpu_index); +memory_region_init_ram (&s->sram,NULL , name, sc->sram_size, &err);if (err !=NULL ) {error_propagate (errp, err);return ;
hw/arm/aspeed_ast2600.c +3 -2
@@ -276,6 +276,7 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ;qemu_irq irq; +char name[64 ];/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",
@@ -335,8 +336,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;
hw/arm/aspeed_soc.c +3 -2
@@ -239,6 +239,7 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)AspeedSoCState *s =ASPEED_SOC (dev);AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ; +char name[64 ];/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",
@@ -259,8 +260,8 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;
Signature · 1 line
2.37.0
Quoted 10 lines · Peter Delevoryas
To support multiple SoC's running simultaneously, we need a unique name for each RAM region. DRAM is created by the machine, but SRAM is created by the SoC, since in hardware it is part of the SoC's internals.
We need a way to uniquely identify each SRAM region though, for VM migration. Since each of the SoC's CPU's has an index which identifies it uniquely from other CPU's in the machine, we can use the index of any of the CPU's in the SoC to uniquely identify differentiate the SRAM name from other SoC SRAM's. In this change, I just elected to use the index of the first CPU in each SoC.
hopefully the index is allocated. Did you check ?
Quoted 35 lines
Signed-off-by Peter Delevoryas <[email protected]>--- hw/arm/aspeed_ast10x0.c | 5 ++++- hw/arm/aspeed_ast2600.c | 5 +++-- hw/arm/aspeed_soc.c | 5 +++-- 3 files changed, 10 insertions(+), 5 deletions(-)hw/arm/aspeed_ast10x0.c +4
-1@@ -159,6 +159,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)DeviceState *armv7m;Error *err =NULL ;int i; +char name[64 ];if (!clock_has_source (s->sysclk)) {error_setg (errp,"sysclk clock must be wired up by the board code" );@@ -183,7 +184,9 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)sysbus_realize (SYS_BUS_DEVICE (&s->armv7m), &error_abort);/* Internal SRAM */ -memory_region_init_ram (&s->sram,NULL ,"aspeed.sram" , sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" , +CPU (s->armv7m.cpu)->cpu_index); +memory_region_init_ram (&s->sram,NULL , name, sc->sram_size, &err);if (err !=NULL ) {error_propagate (errp, err);return ;hw/arm/aspeed_ast2600.c +0
-0
hw/arm/aspeed_ast2600.c static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) · line 279
Quoted 4 lines
hw/arm/aspeed_ast2600.c +1
-0@@ -276,6 +276,7 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ;qemu_irq irq; +char name[64 ];
May be ?
g_autofree char *sram_name =
g_strdup_printf("aspeed.sram.%d", CPU(&s->cpu[0])->cpu_index);
Thanks,
C.
Quoted 37 lines
hw/arm/aspeed_ast2600.c +2
-2/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",@@ -335,8 +336,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;hw/arm/aspeed_soc.c +3
-2@@ -239,6 +239,7 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)AspeedSoCState *s =ASPEED_SOC (dev);AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ; +char name[64 ];/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",@@ -259,8 +260,8 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;
Quoted 5 lines · Cédric Le Goater
Quoted 4 lines · Peter Delevoryas
To support multiple SoC's running simultaneously, we need a unique name for each RAM region. DRAM is created by the machine, but SRAM is created by the SoC, since in hardware it is part of the SoC's internals.
Quoted 8 lines
Quoted 6 lines
We need a way to uniquely identify each SRAM region though, for VM migration. Since each of the SoC's CPU's has an index which identifies it uniquely from other CPU's in the machine, we can use the index of any of the CPU's in the SoC to uniquely identify differentiate the SRAM name from other SoC SRAM's. In this change, I just elected to use the index of the first CPU in each SoC.
hopefully the index is allocated. Did you check ?
You mean the CpuState.cpu_index? I think it's allocated at this point, I actually had to do some debugging just to get it working cause I typo'd the CPU(...) cast at first. I also tried it with the multi-SoC board in your aspeed-7.1 branch:
(qemu) qom-get /machine/bmc aspeed.sram.0[0] "/machine/bmc/aspeed.sram.0[0]"
(qemu) qom-get /machine/unattached aspeed.sram.2[0] "/machine/unattached/aspeed.sram.2[0]"
I think the SRAM in the ast1030 is initialized without a parent object (memory_region_init_ram(..., NULL, ...)) so that's why it's in the unattached area. But we could fix that, maybe I should send a v2 with that too?
Quoted 42 lines
Quoted 35 lines
Signed-off-by Peter Delevoryas <[email protected]>--- hw/arm/aspeed_ast10x0.c | 5 ++++- hw/arm/aspeed_ast2600.c | 5 +++-- hw/arm/aspeed_soc.c | 5 +++-- 3 files changed, 10 insertions(+), 5 deletions(-)hw/arm/aspeed_ast10x0.c +4
-1@@ -159,6 +159,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)DeviceState *armv7m;Error *err =NULL ;int i; +char name[64 ];if (!clock_has_source (s->sysclk)) {error_setg (errp,"sysclk clock must be wired up by the board code" );@@ -183,7 +184,9 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)sysbus_realize (SYS_BUS_DEVICE (&s->armv7m), &error_abort);/* Internal SRAM */ -memory_region_init_ram (&s->sram,NULL ,"aspeed.sram" , sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" , +CPU (s->armv7m.cpu)->cpu_index); +memory_region_init_ram (&s->sram,NULL , name, sc->sram_size, &err);if (err !=NULL ) {error_propagate (errp, err);return ;hw/arm/aspeed_ast2600.c +0
-0hw/arm/aspeed_ast2600.c static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) · line 279
Quoted 4 lines
hw/arm/aspeed_ast2600.c +1
-0@@ -276,6 +276,7 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ;qemu_irq irq; +char name[64 ];May be ?
Quoted 2 lines
g_autofreechar*sram_name=
g_strdup_printf("aspeed.sram.%d", CPU(&s->cpu[0])->cpu_index);
Hmmm yeah sure why not, I can fix the unattached AST1030 SRAM too. I always wanted to use g_autofree some day hehe.
Quoted 41 lines
Thanks,
C.
Quoted 33 lines
hw/arm/aspeed_ast2600.c +2
-2/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",@@ -335,8 +336,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;hw/arm/aspeed_soc.c +3
-2@@ -239,6 +239,7 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)AspeedSoCState *s =ASPEED_SOC (dev);AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ; +char name[64 ];/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",@@ -259,8 +260,8 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;
Quoted 71 lines · Peter Delevoryas
Quoted 5 lines · Cédric Le Goater
Quoted 4 lines · Peter Delevoryas
To support multiple SoC's running simultaneously, we need a unique name for each RAM region. DRAM is created by the machine, but SRAM is created by the SoC, since in hardware it is part of the SoC's internals.
Quoted 8 lines
Quoted 6 lines
We need a way to uniquely identify each SRAM region though, for VM migration. Since each of the SoC's CPU's has an index which identifies it uniquely from other CPU's in the machine, we can use the index of any of the CPU's in the SoC to uniquely identify differentiate the SRAM name from other SoC SRAM's. In this change, I just elected to use the index of the first CPU in each SoC.
hopefully the index is allocated. Did you check ?
You mean the CpuState.cpu_index? I think it's allocated at this point, I actually had to do some debugging just to get it working cause I typo'd the CPU(...) cast at first. I also tried it with the multi-SoC board in your aspeed-7.1 branch:
(qemu) qom-get /machine/bmc aspeed.sram.0[0] "/machine/bmc/aspeed.sram.0[0]"
(qemu) qom-get /machine/unattached aspeed.sram.2[0] "/machine/unattached/aspeed.sram.2[0]"I think the SRAM in the ast1030 is initialized without a parent object (
memory_region_init_ram(..., NULL, ...)) so that's why it's in the unattached area. But we could fix that, maybe I should send a v2 with that too?Quoted 42 lines
Quoted 35 lines
Signed-off-by Peter Delevoryas <[email protected]>--- hw/arm/aspeed_ast10x0.c | 5 ++++- hw/arm/aspeed_ast2600.c | 5 +++-- hw/arm/aspeed_soc.c | 5 +++-- 3 files changed, 10 insertions(+), 5 deletions(-)hw/arm/aspeed_ast10x0.c +4
-1@@ -159,6 +159,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)DeviceState *armv7m;Error *err =NULL ;int i; +char name[64 ];if (!clock_has_source (s->sysclk)) {error_setg (errp,"sysclk clock must be wired up by the board code" );@@ -183,7 +184,9 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)sysbus_realize (SYS_BUS_DEVICE (&s->armv7m), &error_abort);/* Internal SRAM */ -memory_region_init_ram (&s->sram,NULL ,"aspeed.sram" , sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" , +CPU (s->armv7m.cpu)->cpu_index); +memory_region_init_ram (&s->sram,NULL , name, sc->sram_size, &err);if (err !=NULL ) {error_propagate (errp, err);return ;hw/arm/aspeed_ast2600.c +0
-0hw/arm/aspeed_ast2600.c static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) · line 279
Quoted 4 lines
hw/arm/aspeed_ast2600.c +1
-0@@ -276,6 +276,7 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ;qemu_irq irq; +char name[64 ];May be ?
Quoted 5 lines
Quoted 2 lines
g_autofreechar*sram_name=
g_strdup_printf("aspeed.sram.%d", CPU(&s->cpu[0])->cpu_index);Hmmm yeah sure why not, I can fix the unattached AST1030 SRAM too. I always wanted to use
g_autofreesome day hehe.
Actually, can't do this: cpu_index is _not_ initialized at this point (the start of the function). armv7m needs to be realized first in the ast1030, cpu[]'s need to be realized in other SoC's. I don't think it would be preferable to move the autofree statement lower because the convention is to put declarations at the start of the enclosing block, let me know if you have another idea though.
Quoted 42 lines
Quoted 42 lines
Thanks,
C.
Quoted 33 lines
hw/arm/aspeed_ast2600.c +2
-2/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",@@ -335,8 +336,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;hw/arm/aspeed_soc.c +3
-2@@ -239,6 +239,7 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)AspeedSoCState *s =ASPEED_SOC (dev);AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ; +char name[64 ];/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",@@ -259,8 +260,8 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;
Quoted 75 lines · Peter Delevoryas
Quoted 74 lines · Peter Delevoryas
Quoted 5 lines · Cédric Le Goater
Quoted 4 lines · Peter Delevoryas
To support multiple SoC's running simultaneously, we need a unique name for each RAM region. DRAM is created by the machine, but SRAM is created by the SoC, since in hardware it is part of the SoC's internals.
Quoted 8 lines
Quoted 6 lines
We need a way to uniquely identify each SRAM region though, for VM migration. Since each of the SoC's CPU's has an index which identifies it uniquely from other CPU's in the machine, we can use the index of any of the CPU's in the SoC to uniquely identify differentiate the SRAM name from other SoC SRAM's. In this change, I just elected to use the index of the first CPU in each SoC.
hopefully the index is allocated. Did you check ?
You mean the CpuState.cpu_index? I think it's allocated at this point, I actually had to do some debugging just to get it working cause I typo'd the CPU(...) cast at first. I also tried it with the multi-SoC board in your aspeed-7.1 branch:
(qemu) qom-get /machine/bmc aspeed.sram.0[0] "/machine/bmc/aspeed.sram.0[0]"
(qemu) qom-get /machine/unattached aspeed.sram.2[0] "/machine/unattached/aspeed.sram.2[0]"I think the SRAM in the ast1030 is initialized without a parent object (
memory_region_init_ram(..., NULL, ...)) so that's why it's in the unattached area. But we could fix that, maybe I should send a v2 with that too?Quoted 44 lines
Quoted 35 lines
Signed-off-by Peter Delevoryas <[email protected]>--- hw/arm/aspeed_ast10x0.c | 5 ++++- hw/arm/aspeed_ast2600.c | 5 +++-- hw/arm/aspeed_soc.c | 5 +++-- 3 files changed, 10 insertions(+), 5 deletions(-)hw/arm/aspeed_ast10x0.c +4
-1@@ -159,6 +159,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)DeviceState *armv7m;Error *err =NULL ;int i; +char name[64 ];if (!clock_has_source (s->sysclk)) {error_setg (errp,"sysclk clock must be wired up by the board code" );@@ -183,7 +184,9 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)sysbus_realize (SYS_BUS_DEVICE (&s->armv7m), &error_abort);/* Internal SRAM */ -memory_region_init_ram (&s->sram,NULL ,"aspeed.sram" , sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" , +CPU (s->armv7m.cpu)->cpu_index); +memory_region_init_ram (&s->sram,NULL , name, sc->sram_size, &err);if (err !=NULL ) {error_propagate (errp, err);return ;hw/arm/aspeed_ast2600.c +0
-0hw/arm/aspeed_ast2600.c static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) · line 279
Quoted 4 lines
hw/arm/aspeed_ast2600.c +1
-0@@ -276,6 +276,7 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ;qemu_irq irq; +char name[64 ];May be ?
g_autofreechar*sram_name=
g_strdup_printf("aspeed.sram.%d", CPU(&s->cpu[0])->cpu_index);
Quoted 8 lines
Quoted 2 lines
Hmmm yeah sure why not, I can fix the unattached AST1030 SRAM too. I always wanted to use
g_autofreesome day hehe.Actually, can't do this:
cpu_indexis _not_ initialized at this point (the start of the function). armv7m needs to be realized first in the ast1030, cpu[]'s need to be realized in other SoC's. I don't think it would be preferable to move the autofree statement lower because the convention is to put declarations at the start of the enclosing block, let me know if you have another idea though.
Disregard this comment I made, we can use autofree here, we should just initialize the pointer later in the function. I was curious if __attribute__((cleanup)) handles this properly, and it does, based on the macOS "leaks" leak detector:
Without g_autofree:
$ leaks --atExit -- ./build/qemu-system-arm -machine fby35 -drive file=fby35.mtd,format=raw,if=mtd -device loader,file=Y35B
CL.elf,addr=0,cpu-num=2 -serial pty -serial pty -serial mon:stdio -display none -S
char device redirected to /dev/ttys007 (label serial0)
char device redirected to /dev/ttys009 (label serial1)
qemu-system-arm: warning: Aspeed iBT has no chardev backend
QEMU 7.0.50 monitor - type 'help' for more information
(qemu) q
Process: qemu-system-arm [64263]
Path: /Users/USER/*/qemu-system-arm
Load Address: 0x10f181000
Identifier: qemu-system-arm
Version: ???
Code Type: X86-64
Platform: macOS
Parent Process: leaks [64262] Date/Time: 2022-07-02 08:22:43.852 -0700
Launch Time: 2022-07-02 08:22:42.125 -0700
OS Version: macOS 12.4 (21F79)
Report Version: 7
Analysis Tool: /usr/bin/leaks Physical footprint: 443.5M
Physical footprint (peak): 546.2M
----
leaks Report Version: 4.0
Process 64263: 62375 nodes malloced for 300124 KB Process 64263: 1 leak for 128 total leaked bytes.
1 (128 bytes) ROOT LEAK: 0x600003b8ea00 [128] length: 13 "aspeed.sram.2"
With g_autofree:
$ leaks --atExit -- ./build/qemu-system-arm -machine fby35 -drive file=fby35.mtd,format=raw,if=mtd -device loader,file=Y35BCL.elf,addr=0,cpu-num=2 -serial pty -serial pty -serial mon:stdio -display none -S
char device redirected to /dev/ttys007 (label serial0)
char device redirected to /dev/ttys009 (label serial1)
qemu-system-arm: warning: Aspeed iBT has no chardev backend
QEMU 7.0.50 monitor - type 'help' for more information
(qemu) q
Process: qemu-system-arm [65015]
Path: /Users/USER/*/qemu-system-arm
Load Address: 0x10edf7000
Identifier: qemu-system-arm
Version: ???
Code Type: X86-64
Platform: macOS
Parent Process: leaks [65014] Date/Time: 2022-07-02 08:23:13.748 -0700
Launch Time: 2022-07-02 08:23:12.285 -0700
OS Version: macOS 12.4 (21F79)
Report Version: 7
Analysis Tool: /usr/bin/leaks Physical footprint: 438.6M
Physical footprint (peak): 547.0M
----
leaks Report Version: 4.0
Process 65015: 62154 nodes malloced for 299904 KB Process 65015: 0 leaks for 0 total leaked bytes.
So I'll send a v2 using g_autofree and g_strdup_printf.
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
Thanks,
C.
Quoted 33 lines
hw/arm/aspeed_ast2600.c +2
-2/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",@@ -335,8 +336,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;hw/arm/aspeed_soc.c +3
-2@@ -239,6 +239,7 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)AspeedSoCState *s =ASPEED_SOC (dev);AspeedSoCClass *sc =ASPEED_SOC_GET_CLASS (s);Error *err =NULL ; +char name[64 ];/* IO space */ aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",@@ -259,8 +260,8 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) }/* SRAM */ -memory_region_init_ram (&s->sram,OBJECT (dev),"aspeed.sram" , - sc->sram_size, &err); +snprintf (name,sizeof (name),"aspeed.sram.%d" ,CPU (&s->cpu[0 ])->cpu_index); +memory_region_init_ram (&s->sram,OBJECT (dev), name, sc->sram_size, &err);if (err) {error_propagate (errp, err);return ;