Skip to contentSkip to conversation

Add support for mp2733 battery charger

PATCH Applied Saravanan Sekar 5 participants 19 messages Jun 15, 2022 – Oct 1, 2022

Subsystems (5)

v3 of 6 Applied Latest is v6 →

lore
Share & tools
lore

Saravanan Sekar

author maintainer
#0 lore raw

v3 cover Add support for mp2733 battery charger

changes in v3:
- fixed dt_binding_check error
- fixed spelling usb->USB

changes in v2:
- fixed spelling
- revert back probe to probe_new in mfd driver

I do not see a cover letter, but FWIW,

for all patches except DT binding
Note, some of the comments regarding spelling were given, I believe you are going to address them in v3.

add support for mp2733 Battery charger control driver for Monolithic Power System's MP2733 chipset

Saravanan Sekar (6):
iio: adc: mp2629: fix wrong comparison of channel
dt-bindings: mfd: Add mp2733 compatible
mfd: mp2629: Add support for mps mp2733 battery charger
iio: adc: mp2629: restrict input voltage mask for mp2629
power: supply: Add support for mp2733 battery charger
power: supply: mp2629: Add USB fast charge settings

 .../ABI/testing/sysfs-class-power-mp2629      |  16 ++
 .../devicetree/bindings/mfd/mps,mp2629.yaml   |   4 +-
 drivers/iio/adc/mp2629_adc.c                  |   5 +-
 drivers/mfd/mp2629.c                          |   5 +-
 drivers/power/supply/mp2629_charger.c         | 208 +++++++++++++++---
 include/linux/mfd/mp2629.h                    |   6 +
 6 files changed, 212 insertions(+), 32 deletions(-)
Signature · 1 line
2.25.1
author maintainer
#1 lore raw

PATCH v3 1/6 iio: adc: mp2629: fix wrong comparison of channel

Input voltage channel enum is compared against iio address instead of the channel.

Fixes 7abd9fb64682 ("iio: adc: mp2629: Add support for mp2629 ADC driver")
---
 drivers/iio/adc/mp2629_adc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/adc/mp2629_adc.c +1 -1
index aca084f1e78a..e7fbfe92e884 100644
@@ -73,7 +73,7 @@ static int mp2629_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			return ret;
 
-		if (chan->address == MP2629_INPUT_VOLT)
+		if (chan->channel == MP2629_INPUT_VOLT)
 			rval &= GENMASK(6, 0);
 		*val = rval;
 		return IIO_VAL_INT;
Signature · 1 line
2.25.1
maintainer Acked-by on v3 1/6
#2 lore raw

Re: [PATCH v3 1/6] iio: adc: mp2629: fix wrong comparison of channel

Quoted 6 lines · On Wed, 15 Jun 2022 16:53:52 +0200 Saravanan Sekar <[email protected]> wrote:

Input voltage channel enum is compared against iio address instead of the channel.

Fixes 7abd9fb64682 ("iio: adc: mp2629: Add support for mp2629 ADC driver")

So how do you want to handle this? If I take it as a separate fix it will take a while to get upstream so that the later part of this series can be applied on top of it.

If the fix isn't super urgent, then perhaps we just queue it up with the rest of the series and Lee picks up through MFD?

On basis we might go that way.

Also, this probably wants a stable tag.

Thanks,

Jonathan

Quoted 17 lines
---
 drivers/iio/adc/mp2629_adc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/adc/mp2629_adc.c +1 -1
index aca084f1e78a..e7fbfe92e884 100644
@@ -73,7 +73,7 @@ static int mp2629_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			return ret;
 
-		if (chan->address == MP2629_INPUT_VOLT)
+		if (chan->channel == MP2629_INPUT_VOLT)
 			rval &= GENMASK(6, 0);
 		*val = rval;
 		return IIO_VAL_INT;
author maintainer
#3 lore raw

Re: [PATCH v3 1/6] iio: adc: mp2629: fix wrong comparison of channel

On 18/06/22 18:23, Jonathan Cameron wrote:
Hello Jonathan,

Quoted 10 lines
Quoted 6 lines · On Wed, 15 Jun 2022 16:53:52 +0200 Saravanan Sekar <[email protected]> wrote:

Input voltage channel enum is compared against iio address instead of the channel.

Fixes 7abd9fb64682 ("iio: adc: mp2629: Add support for mp2629 ADC driver")
Quoted 7 lines

So how do you want to handle this? If I take it as a separate fix it will take a while to get upstream so that the later part of this series can be applied on top of it.

If the fix isn't super urgent, then perhaps we just queue it up with the rest of the series and Lee picks up through MFD?

Thanks for the review. It is not urgent to integrate now, may wait for Lee to take along with the series.

Quoted 21 lines

On basis we might go that way.

Also, this probably wants a stable tag.

Thanks,

Jonathan

Quoted 12 lines
---
  drivers/iio/adc/mp2629_adc.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/adc/mp2629_adc.c +0 -0
index aca084f1e78a..e7fbfe92e884 100644
@@ -73,7 +73,7 @@ static int mp2629_read_raw(struct iio_dev *indio_dev,
  		if (ret)
  			return ret;
 
Quoted 6 lines

drivers/iio/adc/mp2629_adc.c static int mp2629_read_raw(struct iio_dev *indio_dev, · line 79

Quoted 5 lines
drivers/iio/adc/mp2629_adc.c +1 -1
-		if (chan->address == MP2629_INPUT_VOLT)
+		if (chan->channel == MP2629_INPUT_VOLT)
  			rval &= GENMASK(6, 0);
  		*val = rval;
  		return IIO_VAL_INT;

Thanks,
Saravanan

author maintainer
#4 lore raw

PATCH v3 2/6 dt-bindings: mfd: Add mp2733 compatible

In reply to Saravanan Sekar

Add new compatible for mp2733 mfd driver.

---
 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/mps,mp2629.yaml +3 -1
index f91acc42d652..5ba849d78d8a 100644
@@ -18,7 +18,9 @@ description: |
 
 properties:
   compatible:
-    const: mps,mp2629
+    enum:
+      - mps,mp2629
+      - mps,mp2733
 
   reg:
     maxItems: 1
Signature · 1 line
2.25.1
Applied
#5 lore raw

Re: [PATCH v3 2/6] dt-bindings: mfd: Add mp2733 compatible

Quoted 6 lines · Saravanan Sekar

Add new compatible for mp2733 mfd driver.

---
 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Applied in place of v1, thanks.

Signature · 4 lines
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
#6 lore raw

Re: [PATCH v3 2/6] dt-bindings: mfd: Add mp2733 compatible

Quoted 11 lines · Lee Jones
Quoted 6 lines · Saravanan Sekar

Add new compatible for mp2733 mfd driver.

---
 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Applied in place of v1, thanks.

Still failing, pushed out?

Rob

#7 lore raw

Re: [PATCH v3 2/6] dt-bindings: mfd: Add mp2733 compatible

Quoted 6 lines · Rob Herring
Quoted 5 lines · Lee Jones
Quoted 2 lines · Saravanan Sekar

Add new compatible for mp2733 mfd driver.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
---
 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Applied in place of v1, thanks.

Still failing, pushed out?

Of course not! :)

Please try again tomorrow.

Signature · 4 lines
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
author maintainer
#8 lore raw

PATCH v3 3/6 mfd: mp2629: Add support for mps mp2733 battery charger

In reply to Saravanan Sekar

mp2733 is updated version of mp2629 battery charge management device for single-cell Li-ion or Li-polymer battery. Additionally supports USB fast-charge and higher range of input voltage.

---
 drivers/mfd/mp2629.c       | 5 ++++-
 include/linux/mfd/mp2629.h | 6 ++++++
 2 files changed, 10 insertions(+), 1 deletion(-)
drivers/mfd/mp2629.c +4 -1
index 16840ec5fd1c..f59c97e70f83 100644
@@ -13,6 +13,7 @@
 #include <linux/mfd/mp2629.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
@@ -43,6 +44,7 @@ static int mp2629_probe(struct i2c_client *client)
 		return -ENOMEM;
 
 	ddata->dev = &client->dev;
+	ddata->chip_id = (uintptr_t)device_get_match_data(&client->dev);
 	i2c_set_clientdata(client, ddata);
 
 	ddata->regmap = devm_regmap_init_i2c(client, &mp2629_regmap_config);
@@ -60,7 +62,8 @@ static int mp2629_probe(struct i2c_client *client)
 }
 
 static const struct of_device_id mp2629_of_match[] = {
-	{ .compatible = "mps,mp2629"},
+	{ .compatible = "mps,mp2629", .data = (void *)CHIP_ID_MP2629 },
+	{ .compatible = "mps,mp2733", .data = (void *)CHIP_ID_MP2733 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mp2629_of_match);
include/linux/mfd/mp2629.h +6 -0
index 89b706900b57..ee0e65720c75 100644
@@ -9,9 +9,15 @@
 #include <linux/device.h>
 #include <linux/regmap.h>
 
+enum mp2xx_chip_id {
+	CHIP_ID_MP2629,
+	CHIP_ID_MP2733,
+};
+
 struct mp2629_data {
 	struct device *dev;
 	struct regmap *regmap;
+	enum mp2xx_chip_id chip_id;
 };
 
 enum mp2629_adc_chan {
Signature · 1 line
2.25.1
#9 lore raw

Re: [PATCH v3 3/6] mfd: mp2629: Add support for mps mp2733 battery charger

Quoted 10 lines · Saravanan Sekar

mp2733 is updated version of mp2629 battery charge management device for single-cell Li-ion or Li-polymer battery. Additionally supports USB fast-charge and higher range of input voltage.

---
 drivers/mfd/mp2629.c       | 5 ++++-
 include/linux/mfd/mp2629.h | 6 ++++++
 2 files changed, 10 insertions(+), 1 deletion(-)

For my own reference (apply this as-is to your sign-off block):

Signature · 4 lines
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
author maintainer
#10 lore raw

PATCH v3 4/6 iio: adc: mp2629: restrict input voltage mask for mp2629

In reply to Saravanan Sekar

Add support for mp2733 which is updated version of mp2629 with a higher range of input voltage.

---
 drivers/iio/adc/mp2629_adc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/iio/adc/mp2629_adc.c +4 -1
index e7fbfe92e884..28d048eefce3 100644
@@ -64,6 +64,7 @@ static int mp2629_read_raw(struct iio_dev *indio_dev,
 			int *val, int *val2, long mask)
 {
 	struct mp2629_adc *info = iio_priv(indio_dev);
+	struct mp2629_data *ddata = dev_get_drvdata(info->dev);
 	unsigned int rval;
 	int ret;
 
@@ -73,8 +74,10 @@ static int mp2629_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			return ret;
 
-		if (chan->channel == MP2629_INPUT_VOLT)
+		if (chan->channel == MP2629_INPUT_VOLT &&
+		    ddata->chip_id == CHIP_ID_MP2629)
 			rval &= GENMASK(6, 0);
+
 		*val = rval;
 		return IIO_VAL_INT;
 
Signature · 1 line
2.25.1
maintainer Reviewed-by on v3 4/6
#11 lore raw

Re: [PATCH v3 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629

Quoted 5 lines · On Wed, 15 Jun 2022 16:53:55 +0200 Saravanan Sekar <[email protected]> wrote:

Add support for mp2733 which is updated version of mp2629 with a higher range of input voltage.

I'm assuming Lee will pick this up via mfd. Shout if you want to do something else.

Thanks,

Jonathan

Quoted 28 lines
---
 drivers/iio/adc/mp2629_adc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/iio/adc/mp2629_adc.c +4 -1
index e7fbfe92e884..28d048eefce3 100644
@@ -64,6 +64,7 @@ static int mp2629_read_raw(struct iio_dev *indio_dev,
 			int *val, int *val2, long mask)
 {
 	struct mp2629_adc *info = iio_priv(indio_dev);
+	struct mp2629_data *ddata = dev_get_drvdata(info->dev);
 	unsigned int rval;
 	int ret;
 
@@ -73,8 +74,10 @@ static int mp2629_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			return ret;
 
-		if (chan->channel == MP2629_INPUT_VOLT)
+		if (chan->channel == MP2629_INPUT_VOLT &&
+		    ddata->chip_id == CHIP_ID_MP2629)
 			rval &= GENMASK(6, 0);
+
 		*val = rval;
 		return IIO_VAL_INT;
 
author maintainer
#12 lore raw

PATCH v3 5/6 power: supply: Add support for mp2733 battery charger

In reply to Saravanan Sekar

mp2733 is updated version of mp2629 battery charge management which supports USB fast-charge and higher range of input voltage.

---
 drivers/power/supply/mp2629_charger.c | 208 ++++++++++++++++++++++----
 1 file changed, 179 insertions(+), 29 deletions(-)
drivers/power/supply/mp2629_charger.c +179 -29
index bf9c27b463a8..8d4175d0504f 100644
@@ -30,12 +30,15 @@
 #define MP2629_REG_INTERRUPT		0x0b
 #define MP2629_REG_STATUS		0x0c
 #define MP2629_REG_FAULT		0x0d
+#define MP2629_REG_FAST_CHARGE		0x17
 
 #define MP2629_MASK_INPUT_TYPE		GENMASK(7, 5)
 #define MP2629_MASK_CHARGE_TYPE		GENMASK(4, 3)
 #define MP2629_MASK_CHARGE_CTRL		GENMASK(5, 4)
 #define MP2629_MASK_WDOG_CTRL		GENMASK(5, 4)
 #define MP2629_MASK_IMPEDANCE		GENMASK(7, 4)
+#define MP2733_MASK_FAST_CHARGE		GENMASK(2, 1)
+#define MP2733_MASK_FAST_CHARGE_RESET	BIT(0)
 
 #define MP2629_INPUTSOURCE_CHANGE	GENMASK(7, 5)
 #define MP2629_CHARGING_CHANGE		GENMASK(4, 3)
@@ -62,6 +65,17 @@ enum mp2629_source_type {
 	MP2629_SOURCE_TYPE_OTG = 7,
 };
 
+enum mp2733_source_type {
+	MP2733_SOURCE_TYPE_NO_INPUT,
+	MP2733_SOURCE_TYPE_NON_STD,
+	MP2733_SOURCE_TYPE_APPLE_1p0,
+	MP2733_SOURCE_TYPE_APPLE_2p1,
+	MP2733_SOURCE_TYPE_APPLE_2p4,
+	MP2733_SOURCE_TYPE_SDP,
+	MP2733_SOURCE_TYPE_CDP,
+	MP2733_SOURCE_TYPE_DCP,
+};
+
 enum mp2629_field {
 	INPUT_ILIM,
 	INPUT_VLIM,
@@ -72,11 +86,30 @@ enum mp2629_field {
 	MP2629_MAX_FIELD
 };
 
+struct mp2629_prop {
+	int reg;
+	int mask;
+	int min;
+	int max;
+	int step;
+	int shift;
+};
+
+struct mp2xx_chip_info {
+	const struct reg_field *rfields;
+	struct mp2629_prop *chip_props;
+	bool has_impedance;
+	bool has_fast_charge;
+
+	int (*mpxx_get_usb_type)(unsigned int rval);
+};
+
 struct mp2629_charger {
 	struct device *dev;
 	int status;
 	int fault;
 
+	const struct mp2xx_chip_info *chip_info;
 	struct regmap *regmap;
 	struct regmap_field *regmap_fields[MP2629_MAX_FIELD];
 	struct mutex lock;
@@ -85,15 +118,6 @@ struct mp2629_charger {
 	struct iio_channel *iiochan[MP2629_ADC_CHAN_END];
 };
 
-struct mp2629_prop {
-	int reg;
-	int mask;
-	int min;
-	int max;
-	int step;
-	int shift;
-};
-
 static enum power_supply_usb_type mp2629_usb_types[] = {
 	POWER_SUPPLY_USB_TYPE_SDP,
 	POWER_SUPPLY_USB_TYPE_DCP,
@@ -126,7 +150,25 @@ static enum power_supply_property mp2629_charger_bat_props[] = {
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 };
 
-static struct mp2629_prop props[] = {
+static struct mp2629_prop mp2733_chip_props[] = {
+	MP2629_PROPS(INPUT_ILIM, 100000, 3250000, 50000),
+	MP2629_PROPS(INPUT_VLIM, 3800000, 15200000, 100000),
+	MP2629_PROPS(CHARGE_ILIM, 320000, 4520000, 40000),
+	MP2629_PROPS(CHARGE_VLIM, 3400000, 4670000, 10000),
+	MP2629_PROPS(PRECHARGE, 120000, 720000, 40000),
+	MP2629_PROPS(TERM_CURRENT, 80000, 680000, 40000),
+};
+
+static const struct reg_field mp2733_reg_fields[] = {
+	[INPUT_ILIM]	= REG_FIELD(MP2629_REG_INPUT_ILIM, 0, 5),
+	[INPUT_VLIM]	= REG_FIELD(MP2629_REG_INPUT_VLIM, 0, 6),
+	[CHARGE_ILIM]	= REG_FIELD(MP2629_REG_CHARGE_ILIM, 0, 6),
+	[CHARGE_VLIM]	= REG_FIELD(MP2629_REG_CHARGE_VLIM, 1, 7),
+	[PRECHARGE]	= REG_FIELD(MP2629_REG_PRECHARGE, 4, 7),
+	[TERM_CURRENT]	= REG_FIELD(MP2629_REG_TERM_CURRENT, 0, 3),
+};
+
+static struct mp2629_prop mp2629_chip_props[] = {
 	MP2629_PROPS(INPUT_ILIM, 100000, 3250000, 50000),
 	MP2629_PROPS(INPUT_VLIM, 3800000, 5300000, 100000),
 	MP2629_PROPS(CHARGE_ILIM, 320000, 4520000, 40000),
@@ -174,6 +216,7 @@ static int mp2629_get_prop(struct mp2629_charger *charger,
 {
 	int ret;
 	unsigned int rval;
+	struct mp2629_prop *props = charger->chip_info->chip_props;
 
 	ret = regmap_field_read(charger->regmap_fields[fld], &rval);
 	if (ret)
@@ -189,6 +232,7 @@ static int mp2629_set_prop(struct mp2629_charger *charger,
 			   const union power_supply_propval *val)
 {
 	unsigned int rval;
+	struct mp2629_prop *props = charger->chip_info->chip_props;
 
 	if (val->intval < props[fld].min || val->intval > props[fld].max)
 		return -EINVAL;
@@ -311,6 +355,16 @@ static int mp2629_charger_battery_get_prop(struct power_supply *psy,
 		default:
 			val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
 		}
+
+		if (charger->chip_info->has_fast_charge) {
+			ret = regmap_read(charger->regmap,
+					  MP2629_REG_FAST_CHARGE, &rval);
+			if (ret)
+				break;
+
+			if (rval & BIT(6))
+				val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		}
 		break;
 
 	default:
@@ -344,6 +398,40 @@ static int mp2629_charger_battery_set_prop(struct power_supply *psy,
 	}
 }
 
+static int mp2733_get_usb_type(unsigned int rval)
+{
+	switch (rval) {
+	case MP2733_SOURCE_TYPE_APPLE_1p0:
+	case MP2733_SOURCE_TYPE_APPLE_2p1:
+	case MP2733_SOURCE_TYPE_APPLE_2p4:
+		return POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID;
+	case MP2733_SOURCE_TYPE_SDP:
+		return POWER_SUPPLY_USB_TYPE_SDP;
+	case MP2733_SOURCE_TYPE_CDP:
+		return POWER_SUPPLY_USB_TYPE_CDP;
+	case MP2733_SOURCE_TYPE_DCP:
+		return POWER_SUPPLY_USB_TYPE_DCP;
+	default:
+		return POWER_SUPPLY_USB_TYPE_UNKNOWN;
+	}
+}
+
+static int mp2629_get_usb_type(unsigned int rval)
+{
+	switch (rval) {
+	case MP2629_SOURCE_TYPE_SDP:
+		return POWER_SUPPLY_USB_TYPE_SDP;
+	case MP2629_SOURCE_TYPE_CDP:
+		return POWER_SUPPLY_USB_TYPE_CDP;
+	case MP2629_SOURCE_TYPE_DCP:
+		return POWER_SUPPLY_USB_TYPE_DCP;
+	case MP2629_SOURCE_TYPE_OTG:
+		return POWER_SUPPLY_USB_TYPE_PD_DRP;
+	default:
+		return POWER_SUPPLY_USB_TYPE_UNKNOWN;
+	}
+}
+
 static int mp2629_charger_usb_get_prop(struct power_supply *psy,
 				enum power_supply_property psp,
 				union power_supply_propval *val)
@@ -367,23 +455,7 @@ static int mp2629_charger_usb_get_prop(struct power_supply *psy,
 			break;
 
 		rval = (rval & MP2629_MASK_INPUT_TYPE) >> 5;
-		switch (rval) {
-		case MP2629_SOURCE_TYPE_SDP:
-			val->intval = POWER_SUPPLY_USB_TYPE_SDP;
-			break;
-		case MP2629_SOURCE_TYPE_CDP:
-			val->intval = POWER_SUPPLY_USB_TYPE_CDP;
-			break;
-		case MP2629_SOURCE_TYPE_DCP:
-			val->intval = POWER_SUPPLY_USB_TYPE_DCP;
-			break;
-		case MP2629_SOURCE_TYPE_OTG:
-			val->intval = POWER_SUPPLY_USB_TYPE_PD_DRP;
-			break;
-		default:
-			val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
-			break;
-		}
+		val->intval = charger->chip_info->mpxx_get_usb_type(rval);
 		break;
 
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
@@ -556,6 +628,60 @@ static struct attribute *mp2629_charger_sysfs_attrs[] = {
 };
 ATTRIBUTE_GROUPS(mp2629_charger_sysfs);
 
+static ssize_t usb_fast_charge_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct mp2629_charger *charger = dev_get_drvdata(dev->parent);
+	unsigned int rval;
+	int ret;
+
+	ret = regmap_read(charger->regmap, MP2629_REG_INTERRUPT, &rval);
+	if (ret)
+		return ret;
+
+	return  sysfs_emit(buf, "USB DP %u:DM %u\n", !!(rval & BIT(2)),
+			 !!(rval & BIT(1)));
+}
+
+static ssize_t usb_fast_charge_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf,
+				     size_t count)
+{
+	struct mp2629_charger *charger = dev_get_drvdata(dev->parent);
+	unsigned int val;
+	int ret;
+
+	ret = kstrtouint(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val > 3)
+		return -ERANGE;
+
+	ret = regmap_update_bits(charger->regmap, MP2629_REG_INTERRUPT,
+				 MP2733_MASK_FAST_CHARGE, val << 1);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(charger->regmap, MP2629_REG_INTERRUPT,
+				 MP2733_MASK_FAST_CHARGE_RESET,
+				 MP2733_MASK_FAST_CHARGE_RESET);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(usb_fast_charge);
+
+static struct attribute *mp2733_charger_sysfs_attrs[] = {
+	&dev_attr_usb_fast_charge.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(mp2733_charger_sysfs);
+
 static void mp2629_charger_disable(void *data)
 {
 	struct mp2629_charger *charger = data;
@@ -564,6 +690,23 @@ static void mp2629_charger_disable(void *data)
 					MP2629_MASK_CHARGE_CTRL, 0);
 }
 
+static const struct mp2xx_chip_info mp2xx_chip_info_tbl[] = {
+	[CHIP_ID_MP2629] = {
+		.rfields = mp2629_reg_fields,
+		.chip_props = mp2629_chip_props,
+		.has_impedance = 1,
+
+		.mpxx_get_usb_type = mp2629_get_usb_type,
+	},
+	[CHIP_ID_MP2733] = {
+		.rfields = mp2733_reg_fields,
+		.chip_props = mp2733_chip_props,
+		.has_fast_charge = 1,
+
+		.mpxx_get_usb_type = mp2733_get_usb_type,
+	},
+};
+
 static int mp2629_charger_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -578,6 +721,7 @@ static int mp2629_charger_probe(struct platform_device *pdev)
 
 	charger->regmap = ddata->regmap;
 	charger->dev = dev;
+	charger->chip_info = &mp2xx_chip_info_tbl[ddata->chip_id];
 	platform_set_drvdata(pdev, charger);
 
 	irq = platform_get_irq(to_platform_device(dev->parent), 0);
@@ -586,7 +730,8 @@ static int mp2629_charger_probe(struct platform_device *pdev)
 
 	for (i = 0; i < MP2629_MAX_FIELD; i++) {
 		charger->regmap_fields[i] = devm_regmap_field_alloc(dev,
-					charger->regmap, mp2629_reg_fields[i]);
+					charger->regmap,
+					charger->chip_info->rfields[i]);
 		if (IS_ERR(charger->regmap_fields[i])) {
 			dev_err(dev, "regmap field alloc fail %d\n", i);
 			return PTR_ERR(charger->regmap_fields[i]);
@@ -613,7 +758,12 @@ static int mp2629_charger_probe(struct platform_device *pdev)
 	}
 
 	psy_cfg.drv_data = charger;
-	psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+	if (charger->chip_info->has_impedance)
+		psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+
+	if (charger->chip_info->has_fast_charge)
+		psy_cfg.attr_grp = mp2733_charger_sysfs_groups;
+
 	charger->battery = devm_power_supply_register(dev,
 					 &mp2629_battery_desc, &psy_cfg);
 	if (IS_ERR(charger->battery)) {
Signature · 1 line
2.25.1
Acked-by on v3 5/6
#13 lore raw

Re: [PATCH v3 5/6] power: supply: Add support for mp2733 battery charger

Hi,

Quoted 8 lines · Saravanan Sekar

mp2733 is updated version of mp2629 battery charge management which supports USB fast-charge and higher range of input voltage.

---
[...]

drivers/power/supply/mp2629_charger.c +0 -0
 	psy_cfg.drv_data = charger;

drivers/power/supply/mp2629_charger.c static int mp2629_charger_probe(struct platform_device *pdev) · line 769

Quoted 10 lines
drivers/power/supply/mp2629_charger.c +6 -1
-	psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+	if (charger->chip_info->has_impedance)
+		psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+
+	if (charger->chip_info->has_fast_charge)
+		psy_cfg.attr_grp = mp2733_charger_sysfs_groups;
+
 	charger->battery = devm_power_supply_register(dev,
 					 &mp2629_battery_desc, &psy_cfg);
 	if (IS_ERR(charger->battery)) {

Instead of having has_impedance and has_fast_charge feature flag that are mutual exclusive, store the device type and use if/else or switch statement to chose the correct attr_grp. Other than that:

-- Sebastian

author maintainer
#14 lore raw

Re: [PATCH v3 5/6] power: supply: Add support for mp2733 battery charger

Hi Sebastian,

Quoted 17 lines · Sebastian Reichel

Hi,

Quoted 14 lines · Saravanan Sekar

mp2733 is updated version of mp2629 battery charge management which supports USB fast-charge and higher range of input voltage.

---
[...]
psy_cfg.drv_data = charger;

drivers/power/supply/mp2629_charger.c +5 -1
-	psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+	if (charger->chip_info->has_impedance)
+		psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+
+	if (charger->chip_info->has_fast_charge)
+		psy_cfg.attr_grp = mp2733_charger_sysfs_groups;
Quoted 8 lines
Quoted 4 lines

+
charger->battery = devm_power_supply_register(dev,
&mp2629_battery_desc, &psy_cfg);
if (IS_ERR(charger->battery)) {

Instead of having has_impedance and has_fast_charge feature flag that are mutual exclusive, store the device type and use if/else or switch statement to chose the correct attr_grp.

these flags are not really mutual exclusive, limitation only for application between mp2629 and mp2629. In future another chipset on same series shall have both or none, so I would consider to control flags with functionality rather than chipset !

Please feedback if still I have to consider your proposal.

Quoted 5 lines

Other than that:

-- Sebastian

Thanks,
Saravanan

#15 lore raw

Re: [PATCH v3 5/6] power: supply: Add support for mp2733 battery charger

Hi,

Quoted 25 lines · saravanan sekar
Quoted 15 lines · Sebastian Reichel
Quoted 14 lines · Saravanan Sekar

mp2733 is updated version of mp2629 battery charge management which supports USB fast-charge and higher range of input voltage.

---
[...]
psy_cfg.drv_data = charger;

drivers/power/supply/mp2629_charger.c +5 -1
-	psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+	if (charger->chip_info->has_impedance)
+		psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+
+	if (charger->chip_info->has_fast_charge)
+		psy_cfg.attr_grp = mp2733_charger_sysfs_groups;
Quoted 8 lines
Quoted 4 lines

+
charger->battery = devm_power_supply_register(dev,
&mp2629_battery_desc, &psy_cfg);
if (IS_ERR(charger->battery)) {

Instead of having has_impedance and has_fast_charge feature flag that are mutual exclusive, store the device type and use if/else or switch statement to chose the correct attr_grp.

Quoted 6 lines

these flags are not really mutual exclusive, limitation only for application between mp2629 and mp2629. In future another chipset on same series shall have both or none, so I would consider to control flags with functionality rather than chipset!

Please feedback if still I have to consider your proposal.

I'm fine with this being flag based, but your code assumes that the flags are mutual exclusive, since psy_cfg.attr_grp is overwritten. This is bad style and needs to be fixed:

+ if (charger->chip_info->has_impedance)
+ psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+
+ if (charger->chip_info->has_fast_charge)
+ psy_cfg.attr_grp = mp2733_charger_sysfs_groups;

-- Sebastian

author maintainer
#16 lore raw

PATCH v3 6/6 power: supply: mp2629: Add USB fast charge settings

In reply to Saravanan Sekar

Allows the user to change the USB device fast charge setting to advertise host on enumeration helps to accelerate the charging cycle. Altering this value resets USB existing connection.

---
 .../ABI/testing/sysfs-class-power-mp2629         | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
Documentation/ABI/testing/sysfs-class-power-mp2629 +16 -0
index 914d67caac0d..b386d02cb010 100644
@@ -1,3 +1,19 @@
+What:		/sys/class/power_supply/mp2629_battery/usb_fast_charge
+Date:		June 2022
+KernelVersion:	5.20
+Description:
+		Represents a USB device fast charge settings.Altering this
+		value resets USB existing connection
+		USB DP:DM[0:0] 0.6V : Hi-Z
+		USB DP:DM[0:1] 3.3V : 0.6V
+		USB DP:DM[1:0] 0.6V : 0.6V
+		USB DP:DM[1:1] 0.6V : 3.3V
+
+                Access: Read, Write
+
+                Valid values: Represented in bit DP & DM setting. Valid
+			      range is [0, 3].
+
 What:		/sys/class/power_supply/mp2629_battery/batt_impedance_compen
 Date:		April 2020
 KernelVersion:	5.7
Signature · 1 line
2.25.1
author maintainer
#17 lore raw
In reply to Saravanan Sekar

Hello Lee,

May I know what is the plan for merge this change-set !

Quoted 26 lines · Saravanan Sekar

changes in v3:
- fixed dt_binding_check error
- fixed spelling usb->USB

changes in v2:
- fixed spelling
- revert back probe to probe_new in mfd driver

I do not see a cover letter, but FWIW,

for all patches except DT binding
Note, some of the comments regarding spelling were given, I believe you are going to address them in v3.

add support for mp2733 Battery charger control driver for Monolithic Power System's MP2733 chipset

Saravanan Sekar (6):
iio: adc: mp2629: fix wrong comparison of channel
dt-bindings: mfd: Add mp2733 compatible
mfd: mp2629: Add support for mps mp2733 battery charger
iio: adc: mp2629: restrict input voltage mask for mp2629
power: supply: Add support for mp2733 battery charger
power: supply: mp2629: Add USB fast charge settings

Quoted 8 lines
  .../ABI/testing/sysfs-class-power-mp2629      |  16 ++
  .../devicetree/bindings/mfd/mps,mp2629.yaml   |   4 +-
  drivers/iio/adc/mp2629_adc.c                  |   5 +-
  drivers/mfd/mp2629.c                          |   5 +-
  drivers/power/supply/mp2629_charger.c         | 208 +++++++++++++++---
  include/linux/mfd/mp2629.h                    |   6 +
  6 files changed, 212 insertions(+), 32 deletions(-)

Thanks,
Saravanan

#18 lore raw
Quoted 35 lines · saravanan sekar
Quoted 26 lines · Saravanan Sekar

changes in v3:
- fixed dt_binding_check error
- fixed spelling usb->USB

changes in v2:
- fixed spelling
- revert back probe to probe_new in mfd driver

I do not see a cover letter, but FWIW,

for all patches except DT binding
Note, some of the comments regarding spelling were given, I believe you are going to address them in v3.

add support for mp2733 Battery charger control driver for Monolithic Power System's MP2733 chipset

Saravanan Sekar (6):
iio: adc: mp2629: fix wrong comparison of channel
dt-bindings: mfd: Add mp2733 compatible
mfd: mp2629: Add support for mps mp2733 battery charger
iio: adc: mp2629: restrict input voltage mask for mp2629
power: supply: Add support for mp2733 battery charger
power: supply: mp2629: Add USB fast charge settings

Quoted 7 lines
  .../ABI/testing/sysfs-class-power-mp2629      |  16 ++
  .../devicetree/bindings/mfd/mps,mp2629.yaml   |   4 +-
  drivers/iio/adc/mp2629_adc.c                  |   5 +-
  drivers/mfd/mp2629.c                          |   5 +-
  drivers/power/supply/mp2629_charger.c         | 208 +++++++++++++++---
  include/linux/mfd/mp2629.h                    |   6 +
  6 files changed, 212 insertions(+), 32 deletions(-)
Quoted 1 line

May I know what is the plan for merge this change-set !

It's due for v5.21.

If you're not planning on making any more changes, please collect all of your tags and submit a [RESEND].

Signature · 4 lines
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog