Skip to contentSkip to conversation

crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations

PATCH In review Jason A. Donenfeld 2 participants 3 messages Jul 5, 2022 Crypto API

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations

Various accelerated software implementation Kconfig values for S390 were mistakenly placed into drivers/crypto/Kconfig, even though they're mainly just SIMD code and live in arch/s390/crypto/ like usual. This gives them the very unusual dependency on CRYPTO_HW, which leads to problems elsewhere.

This patch fixes the issue by moving the Kconfig values for non-hardware drivers into the usual place in crypto/Kconfig.

---
 crypto/Kconfig         | 114 ++++++++++++++++++++++++++++++++++++++++
 drivers/crypto/Kconfig | 115 -----------------------------------------
 2 files changed, 114 insertions(+), 115 deletions(-)
crypto/Kconfig +114 -0
index 1d44893a997b..7b81685b5655 100644
@@ -666,6 +666,18 @@ config CRYPTO_CRC32_MIPS
 	  CRC32c and CRC32 CRC algorithms implemented using mips crypto
 	  instructions, when available.
 
+config CRYPTO_CRC32_S390
+	tristate "CRC-32 algorithms"
+	depends on S390
+	select CRYPTO_HASH
+	select CRC32
+	help
+	  Select this option if you want to use hardware accelerated
+	  implementations of CRC algorithms.  With this option, you
+	  can optimize the computation of CRC-32 (IEEE 802.3 Ethernet)
+	  and CRC-32C (Castagnoli).
+
+	  It is available with IBM z13 or later.
 
 config CRYPTO_XXHASH
 	tristate "xxHash hash algorithm"
@@ -898,6 +910,16 @@ config CRYPTO_SHA512_SSSE3
 	  Extensions version 1 (AVX1), or Advanced Vector Extensions
 	  version 2 (AVX2) instructions, when available.
 
+config CRYPTO_SHA512_S390
+	tristate "SHA384 and SHA512 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA512 secure hash standard.
+
+	  It is available as of z10.
+
 config CRYPTO_SHA1_OCTEON
 	tristate "SHA1 digest algorithm (OCTEON)"
 	depends on CPU_CAVIUM_OCTEON
@@ -930,6 +952,16 @@ config CRYPTO_SHA1_PPC_SPE
 	  SHA-1 secure hash standard (DFIPS 180-4) implemented
 	  using powerpc SPE SIMD instruction set.
 
+config CRYPTO_SHA1_S390
+	tristate "SHA1 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
+
+	  It is available as of z990.
+
 config CRYPTO_SHA256
 	tristate "SHA224 and SHA256 digest algorithm"
 	select CRYPTO_HASH
@@ -970,6 +1002,16 @@ config CRYPTO_SHA256_SPARC64
 	  SHA-256 secure hash standard (DFIPS 180-2) implemented
 	  using sparc64 crypto instructions, when available.
 
+config CRYPTO_SHA256_S390
+	tristate "SHA256 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA256 secure hash standard (DFIPS 180-2).
+
+	  It is available as of z9.
+
 config CRYPTO_SHA512
 	tristate "SHA384 and SHA512 digest algorithms"
 	select CRYPTO_HASH
@@ -1010,6 +1052,26 @@ config CRYPTO_SHA3
 	  References:
 	  http://keccak.noekeon.org/
 
+config CRYPTO_SHA3_256_S390
+	tristate "SHA3_224 and SHA3_256 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA3_256 secure hash standard.
+
+	  It is available as of z14.
+
+config CRYPTO_SHA3_512_S390
+	tristate "SHA3_384 and SHA3_512 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA3_512 secure hash standard.
+
+	  It is available as of z14.
+
 config CRYPTO_SM3
 	tristate
 
@@ -1070,6 +1132,16 @@ config CRYPTO_GHASH_CLMUL_NI_INTEL
 	  This is the x86_64 CLMUL-NI accelerated implementation of
 	  GHASH, the hash function used in GCM (Galois/Counter mode).
 
+config CRYPTO_GHASH_S390
+	tristate "GHASH hash function"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of GHASH,
+	  the hash function used in GCM (Galois/Counter mode).
+
+	  It is available as of z196.
+
 comment "Ciphers"
 
 config CRYPTO_AES
@@ -1185,6 +1257,23 @@ config CRYPTO_AES_PPC_SPE
 	  architecture specific assembler implementations that work on 1KB
 	  tables or 256 bytes S-boxes.
 
+config CRYPTO_AES_S390
+	tristate "AES cipher algorithms"
+	depends on S390
+	select CRYPTO_ALGAPI
+	select CRYPTO_SKCIPHER
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  AES cipher algorithms (FIPS-197).
+
+	  As of z9 the ECB and CBC modes are hardware accelerated
+	  for 128 bit keys.
+	  As of z10 the ECB and CBC modes are hardware accelerated
+	  for all AES key sizes.
+	  As of z196 the CTR mode is hardware accelerated for all AES
+	  key sizes and XTS mode is hardware accelerated for 256 and
+	  512 bit keys.
+
 config CRYPTO_ANUBIS
 	tristate "Anubis cipher algorithm"
 	depends on CRYPTO_USER_API_ENABLE_OBSOLETE
@@ -1415,6 +1504,19 @@ config CRYPTO_DES3_EDE_X86_64
 	  algorithm are provided; regular processing one input block and
 	  one that processes three blocks parallel.
 
+config CRYPTO_DES_S390
+	tristate "DES and Triple DES cipher algorithms"
+	depends on S390
+	select CRYPTO_ALGAPI
+	select CRYPTO_SKCIPHER
+	select CRYPTO_LIB_DES
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
+
+	  As of z990 the ECB and CBC mode are hardware accelerated.
+	  As of z196 the CTR mode is hardware accelerated.
+
 config CRYPTO_FCRYPT
 	tristate "FCrypt cipher algorithm"
 	select CRYPTO_ALGAPI
@@ -1474,6 +1576,18 @@ config CRYPTO_CHACHA_MIPS
 	select CRYPTO_SKCIPHER
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
 
+config CRYPTO_CHACHA_S390
+	tristate "ChaCha20 stream cipher"
+	depends on S390
+	select CRYPTO_SKCIPHER
+	select CRYPTO_LIB_CHACHA_GENERIC
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+	help
+	  This is the s390 SIMD implementation of the ChaCha20 stream
+	  cipher (RFC 7539).
+
+	  It is available as of z13.
+
 config CRYPTO_SEED
 	tristate "SEED cipher algorithm"
 	depends on CRYPTO_USER_API_ENABLE_OBSOLETE
drivers/crypto/Kconfig +0 -115

127 lines not on this page · raw message

Signature · 1 line
2.35.1
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 6 lines · Jason A. Donenfeld

Various accelerated software implementation Kconfig values for S390 were mistakenly placed into drivers/crypto/Kconfig, even though they're mainly just SIMD code and live in arch/s390/crypto/ like usual. This gives them the very unusual dependency on CRYPTO_HW, which leads to problems elsewhere.

Quoted 8 lines

This patch fixes the issue by moving the Kconfig values for non-hardware drivers into the usual place in crypto/Kconfig.

---
 crypto/Kconfig         | 114 ++++++++++++++++++++++++++++++++++++++++
 drivers/crypto/Kconfig | 115 -----------------------------------------
 2 files changed, 114 insertions(+), 115 deletions(-)

This is caused by the s390 patch for wireguard, right?

As such it's a new feature and I don't see why it needs to go in right away. Having said that, if you insist I'm happy for you take this into your tree along with the wireguard patch where it would make more sense.

I've also added CCs to the s390 maintainers.

Thanks,

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
#2 lore raw
Quoted 10 lines · Herbert Xu
Quoted 9 lines · Jason A. Donenfeld

Various accelerated software implementation Kconfig values for S390 were mistakenly placed into drivers/crypto/Kconfig, even though they're mainly just SIMD code and live in arch/s390/crypto/ like usual. This gives them the very unusual dependency on CRYPTO_HW, which leads to problems elsewhere.

This patch fixes the issue by moving the Kconfig values for non-hardware drivers into the usual place in crypto/Kconfig.

Quoted 7 lines
Quoted 5 lines
---
 crypto/Kconfig         | 114 ++++++++++++++++++++++++++++++++++++++++
 drivers/crypto/Kconfig | 115 -----------------------------------------
 2 files changed, 114 insertions(+), 115 deletions(-)

This is caused by the s390 patch for wireguard, right?

Right, but is a fix to some linker/kconfig errors related to selecting chacha20poly1305 directly, and I'm happy to take that patch anyway, so I'm quasi-content with the situation.

Quoted 4 lines

you take this into your tree along with the wireguard patch where it would make more sense.

Alright, I'll do that.

Jason