Skip to contentSkip to conversation

[PATCH v1 0/1]

PATCH In review Kevin Lu 2 participants 4 messages Aug 7, 2022 – Aug 8, 2022

lore
Share & tools
lore

Kevin Lu

author
#0 lore raw

cover [PATCH v1 0/1]

*** BLURB HERE ***

Kevin Lu (1):
drivers: Modify some parts

 tlv320adcx140.c | 114 ++++++++++++++++++++++++++++++++++++------------
 tlv320adcx140.h |   7 +--
 2 files changed, 90 insertions(+), 31 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH 1/1 drivers: Modify some parts

Add a new kcontrol for phase calib, remove unnecessary header file, make code more comply with linux coding style

---
 tlv320adcx140.c | 114 ++++++++++++++++++++++++++++++++++++------------
 tlv320adcx140.h |   7 +--
 2 files changed, 90 insertions(+), 31 deletions(-)
tlv320adcx140.c +86 -28
index 2844a9d..ed5db00 100644
@@ -1,24 +1,26 @@
 // SPDX-License-Identifier: GPL-2.0
 // TLV320ADCX140 Sound driver
-// Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+// Copyright (C) 2020 - 2022 Texas Instruments Incorporated
+// - https://www.ti.com/
+/*
+ * Author: Kevin Lu <[email protected]>
+ *
+ *  Features:-
+ *
+ *   o Add a new kcontrol for phase calib
+ *   o Remove unnecessary header file
+ *   o Make code more comply with linux coding style
+ */
 
 #include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/gpio/consumer.h>
-#include <linux/regulator/consumer.h>
-#include <linux/acpi.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
-#include <linux/slab.h>
-#include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
-#include <sound/initval.h>
 #include <sound/tlv.h>
 
 #include "tlv320adcx140.h"
@@ -34,6 +36,7 @@ struct adcx140_priv {
 
 	unsigned int dai_fmt;
 	unsigned int slot_width;
+	int phase_calib_on;
 };
 
 static const char * const gpo_config_names[] = {
@@ -592,6 +595,39 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = {
 	{"MIC4M Input Mux", "Digital", "MIC4M"},
 };
 
+static const char * const phase_calib_text[] = {
+	"Disable",
+	"Enable"
+};
+
+static const struct soc_enum phase_calib_enum[] = {
+	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(phase_calib_text), phase_calib_text),
+};
+
+static int adcx140_phase_calib_get(struct snd_kcontrol *pKcontrol,
+	struct snd_ctl_elem_value *pValue)
+{
+	struct snd_soc_component *codec =
+		snd_soc_kcontrol_component(pKcontrol);
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(codec);
+
+	pValue->value.integer.value[0] = adcx140->phase_calib_on;
+
+	return 0;
+}
+
+static int adcx140_phase_calib_put(struct snd_kcontrol *pKcontrol,
+	struct snd_ctl_elem_value *pValue)
+{
+	struct snd_soc_component *codec
+		= snd_soc_kcontrol_component(pKcontrol);
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(codec);
+
+	adcx140->phase_calib_on = pValue->value.integer.value[0];
+
+	return 0;
+}
+
 static const struct snd_kcontrol_new adcx140_snd_controls[] = {
 	SOC_SINGLE_TLV("Analog CH1 Mic Gain Volume", ADCX140_CH1_CFG1, 2, 42, 0,
 			adc_tlv),
@@ -628,6 +664,8 @@ static const struct snd_kcontrol_new adcx140_snd_controls[] = {
 			0, 0xff, 0, dig_vol_tlv),
 	SOC_SINGLE_TLV("Digital CH8 Out Volume", ADCX140_CH8_CFG2,
 			0, 0xff, 0, dig_vol_tlv),
+	SOC_ENUM_EXT("Phase calib", phase_calib_enum[0],
+		adcx140_phase_calib_get, adcx140_phase_calib_put),
 };
 
 static int adcx140_reset(struct adcx140_priv *adcx140)
@@ -650,9 +688,11 @@ static int adcx140_reset(struct adcx140_priv *adcx140)
 	return ret;
 }
 
-static void adcx140_pwr_ctrl(struct adcx140_priv *adcx140, bool power_state)
+static void adcx140_pwr_ctrl(struct adcx140_priv *adcx140,
+	bool power_state)
 {
-	int pwr_ctrl = 0;
+	int pwr_ctrl = 0, ret = 0;
+	struct snd_soc_component *component = adcx140->component;
 
 	if (power_state)
 		pwr_ctrl = ADCX140_PWR_CFG_ADC_PDZ | ADCX140_PWR_CFG_PLL_PDZ;
@@ -660,8 +700,17 @@ static void adcx140_pwr_ctrl(struct adcx140_priv *adcx140, bool power_state)
 	if (adcx140->micbias_vg && power_state)
 		pwr_ctrl |= ADCX140_PWR_CFG_BIAS_PDZ;
 
-	regmap_update_bits(adcx140->regmap, ADCX140_PWR_CFG,
-			   ADCX140_PWR_CTRL_MSK, pwr_ctrl);
+	ret = regmap_write(adcx140->regmap, ADCX140_PHASE_CALIB,
+		adcx140->phase_calib_on ? 0x00 : 0x40);
+	if (ret)
+		dev_err(component->dev, "%s: register write error %d\n",
+			__func__, ret);
+
+	ret = regmap_update_bits(adcx140->regmap, ADCX140_PWR_CFG,
+		ADCX140_PWR_CTRL_MSK, pwr_ctrl);
+	if (ret)
+		dev_err(component->dev, "%s: register bits update error %d\n",
+			__func__, ret);
 }
 
 static int adcx140_hw_params(struct snd_pcm_substream *substream,
@@ -795,7 +844,8 @@ static int adcx140_set_dai_tdm_slot(struct snd_soc_dai *codec_dai,
 	 * only supports adjacent slots beginning at the first slot.
 	 */
 	if (tx_mask != GENMASK(__fls(tx_mask), 0)) {
-		dev_err(component->dev, "Only lower adjacent slots are supported\n");
+		dev_err(component->dev,
+			"Only lower adjacent slots are supported\n");
 		return -EINVAL;
 	}
 
@@ -806,7 +856,8 @@ static int adcx140_set_dai_tdm_slot(struct snd_soc_dai *codec_dai,
 	case 32:
 		break;
 	default:
-		dev_err(component->dev, "Unsupported slot width %d\n", slot_width);
+		dev_err(component->dev, "Unsupported slot width %d\n",
+			slot_width);
 		return -EINVAL;
 	}
 
@@ -837,12 +888,14 @@ static int adcx140_configure_gpo(struct adcx140_priv *adcx140)
 			continue;
 
 		if (gpo_outputs[0] > ADCX140_GPO_CFG_MAX) {
-			dev_err(adcx140->dev, "GPO%d config out of range\n", i + 1);
+			dev_err(adcx140->dev, "GPO%d config out of range\n",
+				i + 1);
 			return -EINVAL;
 		}
 
 		if (gpo_outputs[1] > ADCX140_GPO_DRV_MAX) {
-			dev_err(adcx140->dev, "GPO%d drive out of range\n", i + 1);
+			dev_err(adcx140->dev, "GPO%d drive out of range\n",
+				i + 1);
 			return -EINVAL;
 		}
 
@@ -891,7 +944,8 @@ static int adcx140_configure_gpio(struct adcx140_priv *adcx140)
 	gpio_output_val = gpio_outputs[0] << ADCX140_GPIO_SHIFT
 		| gpio_outputs[1];
 
-	return regmap_write(adcx140->regmap, ADCX140_GPIO_CFG0, gpio_output_val);
+	return regmap_write(adcx140->regmap, ADCX140_GPIO_CFG0,
+		gpio_output_val);
 }
 
 static int adcx140_codec_probe(struct snd_soc_component *component)
@@ -958,7 +1012,8 @@ static int adcx140_codec_probe(struct snd_soc_component *component)
 			return ret;
 
 		for (i = 0; i < pdm_count; i++)
-			pdm_edge_val |= pdm_edges[i] << (ADCX140_PDM_EDGE_SHIFT - i);
+			pdm_edge_val |=
+			pdm_edges[i] << (ADCX140_PDM_EDGE_SHIFT - i);
 
 		ret = regmap_write(adcx140->regmap, ADCX140_PDM_CFG,
 				   pdm_edge_val);
@@ -974,16 +1029,16 @@ static int adcx140_codec_probe(struct snd_soc_component *component)
 		if (ret)
 			return ret;
 
-		gpi_input_val = gpi_inputs[ADCX140_GPI1_INDEX] << ADCX140_GPI_SHIFT |
-				gpi_inputs[ADCX140_GPI2_INDEX];
+		gpi_input_val = gpi_inputs[ADCX140_GPI1_INDEX]
+			<< ADCX140_GPI_SHIFT | gpi_inputs[ADCX140_GPI2_INDEX];
 
 		ret = regmap_write(adcx140->regmap, ADCX140_GPI_CFG0,
 				   gpi_input_val);
 		if (ret)
 			return ret;
 
-		gpi_input_val = gpi_inputs[ADCX140_GPI3_INDEX] << ADCX140_GPI_SHIFT |
-				gpi_inputs[ADCX140_GPI4_INDEX];
+		gpi_input_val = gpi_inputs[ADCX140_GPI3_INDEX]
+			<< ADCX140_GPI_SHIFT | gpi_inputs[ADCX140_GPI4_INDEX];
 
 		ret = regmap_write(adcx140->regmap, ADCX140_GPI_CFG1,
 				   gpi_input_val);
@@ -1010,7 +1065,8 @@ static int adcx140_codec_probe(struct snd_soc_component *component)
 		ret = regmap_update_bits(adcx140->regmap, ADCX140_ASI_CFG0,
 				 ADCX140_TX_FILL, ADCX140_TX_FILL);
 		if (ret) {
-			dev_err(adcx140->dev, "Setting Tx drive failed %d\n", ret);
+			dev_err(adcx140->dev,
+				"Setting Tx drive failed %d\n", ret);
 			goto out;
 		}
 	}
@@ -1020,8 +1076,9 @@ out:
 	return ret;
 }
 
-static int adcx140_set_bias_level(struct snd_soc_component *component,
-				  enum snd_soc_bias_level level)
+static int adcx140_set_bias_level(
+	struct snd_soc_component *component,
+	enum snd_soc_bias_level level)
 {
 	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
 
@@ -1116,7 +1173,8 @@ static int adcx140_i2c_probe(struct i2c_client *i2c)
 			return ret;
 		}
 
-		ret = devm_add_action_or_reset(&i2c->dev, adcx140_disable_regulator, adcx140);
+		ret = devm_add_action_or_reset(&i2c->dev,
+			adcx140_disable_regulator, adcx140);
 		if (ret)
 			return ret;
 	}
@@ -1156,4 +1214,4 @@ module_i2c_driver(adcx140_i2c_driver);
 
 MODULE_AUTHOR("Dan Murphy <[email protected]>");
 MODULE_DESCRIPTION("ASoC TLV320ADCX140 CODEC Driver");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
tlv320adcx140.h +4 -3
index d7d4e3a..ca05a94 100644
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 // TLV320ADCX104 Sound driver
 // Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
 
@@ -16,7 +16,7 @@
 
 #define ADCX140_PAGE_SELECT	0x00
 #define ADCX140_SW_RESET	0x01
-#define ADCX140_SLEEP_CFG 	0x02
+#define ADCX140_SLEEP_CFG	0x02
 #define ADCX140_SHDN_CFG	0x05
 #define ADCX140_ASI_CFG0	0x07
 #define ADCX140_ASI_CFG1	0x08
@@ -63,7 +63,7 @@
 #define ADCX140_CH3_CFG1	0x47
 #define ADCX140_CH3_CFG2	0x48
 #define ADCX140_CH3_CFG3	0x49
-#define ADCX140_CH3_CFG4 	0x4a
+#define ADCX140_CH3_CFG4	0x4a
 #define ADCX140_CH4_CFG0	0x4b
 #define ADCX140_CH4_CFG1	0x4c
 #define ADCX140_CH4_CFG2	0x4d
@@ -90,6 +90,7 @@
 #define ADCX140_PWR_CFG		0x75
 #define ADCX140_DEV_STS0	0x76
 #define ADCX140_DEV_STS1	0x77
+#define ADCX140_PHASE_CALIB	0x7b
 
 #define ADCX140_RESET	BIT(0)
 
Signature · 1 line
2.17.1
#2 lore raw

Re: [PATCH v1 1/1] drivers: Modify some parts

Quoted 8 lines · Kevin Lu

Add a new kcontrol for phase calib, remove unnecessary header file, make code more comply with linux coding style

---
 tlv320adcx140.c | 114 ++++++++++++++++++++++++++++++++++++------------
 tlv320adcx140.h |   7 +--
 2 files changed, 90 insertions(+), 31 deletions(-)

As covered in submitting-patches.rst your diff should be against the root of the kernel tree rather than files in a subdirectory, look at how other patches on the list are being formatted for examples of how things look. If you use git format-patch to generate patches it should do the right thing for you.

The fact that you're describing three different changes changes here suggests that this should be a patch series rather than a single patch, as covered in submitting-patches.rst this is the general style for Linux as it makes things much easier to review. Each logical change should be a separate patch.

tlv320adcx140.c line 8

Quoted 7 lines
tlv320adcx140.c +6 -1
-// Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+// Copyright (C) 2020 - 2022 Texas Instruments Incorporated
+// - https://www.ti.com/
+/*
+ * Author: Kevin Lu <[email protected]>
+ *
+ *  Features:-

Please add the new bits to the header as C++ comments as well, this makes things look more intentional.

tlv320adcx140.c static const struct snd_soc_dapm_route adcx140_audio_map[] = { · line 605

Quoted 8 lines
tlv320adcx140.c +8 -0
+static const char * const phase_calib_text[] = {
+	"Disable",
+	"Enable"
+};
+
+static const struct soc_enum phase_calib_enum[] = {
+	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(phase_calib_text), phase_calib_text),
+};

This is an on/off switch, it should be a normal boolean control ending in Switch and taking 0 and 1 as valid values.

tlv320adcx140.c static const struct snd_soc_dapm_route adcx140_audio_map[] = { · line 628

Quoted 10 lines
tlv320adcx140.c +10 -0
+static int adcx140_phase_calib_put(struct snd_kcontrol *pKcontrol,
+	struct snd_ctl_elem_value *pValue)
+{
+	struct snd_soc_component *codec
+		= snd_soc_kcontrol_component(pKcontrol);
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(codec);
+
+	adcx140->phase_calib_on = pValue->value.integer.value[0];
+
+	return 0;

The issues with use of hungarian notation and not generating events that were present previously remain.

Please don't ignore review comments, people are generally making them for a reason and are likely to have the same concerns if issues remain unaddressed. Having to repeat the same comments can get repetitive and make people question the value of time spent reviewing. If you disagree with the review comments that's fine but you need to reply and discuss your concerns so that the reviewer can understand your decisions.

#3 lore raw
In reply to Kevin Lu
Quoted 4 lines · Kevin Lu

*** BLURB HERE ***

Kevin Lu (1):
drivers: Modify some parts

Please don't send cover letters for single patches, if there is anything that needs saying put it in the changelog of the patch or after the --- if it's administrative stuff. This reduces mail volume and ensures that any important information is recorded in the changelog rather than being lost.