i2c: scmi: Replace open coded device_get_match_data()
A message that is not in the archive (sent off-list or not yet received): 20220708120958.74034-1-andriy.shevchenko () linux ! intel ! com
Quoted 40 lines · Andy Shevchenko
Replace open coded
device_get_match_data()inacpi_smbus_cmi_add().Signed-off-by Andy Shevchenko <[email protected]>---
v2: useddevice_get_match_data()
v3: fixed couple of warnings (LKP)drivers/i2c/busses/i2c-scmi.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)drivers/i2c/busses/i2c-scmi.c +2
-2@@ -30,7 +30,7 @@ struct acpi_smbus_cmi { u8 cap_info:1; u8 cap_read:1; u8 cap_write:1; -struct smbus_methods_t *methods; +const struct smbus_methods_t *methods; };static const struct smbus_methods_t smbus_methods = {@@ -361,7 +361,6 @@ static acpi_status acpi_smbus_cmi_query_methods(acpi_handle handle, u32 level,static int acpi_smbus_cmi_add (struct acpi_device *device) {struct acpi_smbus_cmi *smbus_cmi; -const struct acpi_device_id *id;int ret; smbus_cmi =kzalloc (sizeof (struct acpi_smbus_cmi ),GFP_KERNEL );@@ -369,6 +368,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)return -ENOMEM ; smbus_cmi->handle = device->handle; + smbus_cmi->methods =device_get_match_data (&device->dev);strcpy (acpi_device_name (device),ACPI_SMBUS_HC_DEVICE_NAME );strcpy (acpi_device_class (device),ACPI_SMBUS_HC_CLASS ); device->driver_data = smbus_cmi;@@ -376,11 +376,6 @@ static int acpi_smbus_cmi_add(struct acpi_device *device) smbus_cmi->cap_read =0 ;
drivers/i2c/busses/i2c-scmi.c static int acpi_smbus_cmi_add(struct acpi_device *device) · line 381
Quoted 10 lines
drivers/i2c/busses/i2c-scmi.c +0
-5smbus_cmi->cap_write =0 ; -for (id = acpi_smbus_cmi_ids; id->id[0 ]; id++) -if (!strcmp (id->id,acpi_device_hid (device))) - smbus_cmi->methods = - (struct smbus_methods_t *) id->driver_data; -acpi_walk_namespace (ACPI_TYPE_METHOD , smbus_cmi->handle,1 , acpi_smbus_cmi_query_methods,NULL , smbus_cmi,NULL );
Hi,
I tried build Linux 6.0 and run under Xen 4.14.5. I got a kernel null pointer dereferenced while booting. Reverting this commit allowed the system to boot.
Since I do not have any way of capturing the error except camera (it's a long message), here's my best try.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0800) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPT CPU: 3 PID: 1879 Comm: systemd-udevd Tainted: G W 6.0.0-1.fc32.quebs.x86_64 #1 RIP: e838:acpi_smbus_cmi_add_cap.isra.0+0x45/0x1a0 [i2c_scmi] Code: 84 00 00 4c 8b 37 4c 89 e7 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0 48 c7 04 24 ff ff ff ff 48 c7 44 24 08 00 00 00 00 <4c>
RSP: e02b:ffffc98841d1bad8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88810abb6000 RCX: 0000000000000000
RDX: ffffc90041d1bb23 RSI: ffffc90041d1bb33 RDI: ffffc90041d1bb33
RBP: 0000000000000000 R08: ffff88818127169c R09: 0000000000000000
R10: ffff8881020f56f0 R11: 0000000000000000 R12: ffffc90041d1bb33
R13: 0000000000000000 r14: fffff888181271cc0 R15: 0000000000000000
FS: 00007572507ceb00(0000) GS: ffff8881408c0000(0000) knlGS: 0000000000000000
CS: e830 DS: 0000 ES: 0000 CR0: 0000000000050033
CR2: 0000000000000000 CR3: 000000010ab1e000 CR4: 0000000000010660
Call Trace: <TASK> acp_smbus_cmi_query_methods+0x78/0x7f [i2c_scmi] acpi_ns_walk_namespace+0xea/0x1cb ? acpi_smbus_cmi_add_cap.isra.0+0x1a8/0x1a0 [i2c_scmi] ? acpi_smbus_cmi_add_cap.isra.0+0x1a8/0x1a0 [i2c_scmi] acpi_ns_walk_namespace+0x99/0xcf acpi_smbus_cmi_add+0xad/0x150 [i2c_scmi] acpi_device_probe+0xx45/0x160
call_driver-probe+0x24/0xe0
really_probe+0xcf/0x2d0 ? pm_runtime_barrier+0x50/0x90 __driver_probe_device+0x70/0x180 driver_probe_device+0x1e/0x90 __driver_attach+0xc4/0x1e0
? __device_attach_driver+0x??
? __device_attach_driver+??
bus_for-each_dev
bus_add_driver
driver_register
??
do_one_initcall
do_init_module
__do_sys_finit_??
do_syscall_64
? do_syscall_64
? syscall_exit_to_??
? do_syscall_64
entry_SYSCALL_64_after??
RIP:
Code:
RSP:
RAX
RZBX
?
R10
R13
</TASK> Modules linked in:
CR2: 0000000000000000
---[ end trace RIP: e830: acpi_smbis_cmi_add_cap.isra
Code:..
RSP..
..
CR2: ?
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
Cheers
Josef
Hi,
Quoted 1 line
I tried build Linux 6.0 and run under Xen 4.14.5. I got a kernel null pointer dereferenced while booting. Reverting this commit allowed the system to boot.
Thank you for the report and the provided information. I will give Andy a bit of time to come up with a fix. If a fix is not easily possible, this will get reverted for rc2.
Thanks again,
Wolfram
Quoted 11 lines · Wolfram Sang
Hi,
Quoted 1 line
I tried build Linux 6.0 and run under Xen 4.14.5. I got a kernel null pointer dereferenced while booting. Reverting this commit allowed the system to boot.
Thank you for the report and the provided information. I will give Andy a bit of time to come up with a fix. If a fix is not easily possible, this will get reverted for rc2.
Thanks again,
Wolfram
No problem, I'm just testing out tip.
Not verified by anyone but me so it could be me just having odd kernel config.
Regards
- Josef
Quoted 3 lines
Not verified by anyone but me so it could be me just having odd kernel config.
I also love odd kernel configs to find bugs :)
Quoted 7 lines · Wolfram Sang
Hi,
Quoted 1 line
I tried build Linux 6.0 and run under Xen 4.14.5. I got a kernel null pointer dereferenced while booting. Reverting this commit allowed the system to boot.
Thank you for the report and the provided information. I will give Andy a bit of time to come up with a fix. If a fix is not easily possible, this will get reverted for rc2.
Haven't seen in the thread information about revert done, hence if nobody respond in this way, I will look into this starting from tomorrow (sorry, was on a sick leave).
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 7 lines · Josef Johansson
On 7/8/22 14:09, Andy Shevchenko wrote:
I tried build Linux 6.0 and run under Xen 4.14.5. I got a kernel null pointer dereferenced while booting. Reverting this commit allowed the system to boot.
Since I do not have any way of capturing the error except camera (it's a long message), here's my best try.
BUG: kernel NULL pointer dereference, address: 0000000000000000
I think I know what happens there. Can you test a hackpatch (below) with my patch _not being reverted_?
drivers/i2c/busses/i2c-scmi.c +3 -0
@@ -426,6 +426,9 @@ static struct acpi_driver acpi_smbus_cmi_driver = { .add = acpi_smbus_cmi_add, .remove = acpi_smbus_cmi_remove, }, + .drv = { + .acpi_match_table = acpi_smbus_cmi_ids, + }, };module_acpi_driver (acpi_smbus_cmi_driver);
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 16 lines · Andy Shevchenko
Quoted 6 lines · Josef Johansson
On 7/8/22 14:09, Andy Shevchenko wrote:
I tried build Linux 6.0 and run under Xen 4.14.5. I got a kernel null pointer dereferenced while booting. Reverting this commit allowed the system to boot.Since I do not have any way of capturing the error except camera (it's a long message), here's my best try.
BUG: kernel NULL pointer dereference, address: 0000000000000000I think I know what happens there. Can you test a hackpatch (below) with my patch
_notbeingreverted_?drivers/i2c/busses/i2c-scmi.c +0
-0
drivers/i2c/busses/i2c-scmi.c static struct acpi_driver acpi_smbus_cmi_driver = { · line 434
Quoted 9 lines
drivers/i2c/busses/i2c-scmi.c +3
-0@@ -426,6 +426,9 @@ static struct acpi_driver acpi_smbus_cmi_driver = { .add = acpi_smbus_cmi_add, .remove = acpi_smbus_cmi_remove, }, + .drv = { + .acpi_match_table = acpi_smbus_cmi_ids, + }, };module_acpi_driver (acpi_smbus_cmi_driver);
Hi,
I applied your patch and the system boots now. Good job :)
Regards
- Josef
Quoted 27 lines · Josef Johansson
Quoted 15 lines · Andy Shevchenko
Quoted 6 lines · Josef Johansson
On 7/8/22 14:09, Andy Shevchenko wrote:
I tried build Linux 6.0 and run under Xen 4.14.5. I got a kernel null pointer dereferenced while booting. Reverting this commit allowed the system to boot.Since I do not have any way of capturing the error except camera (it's a long message), here's my best try.
BUG: kernel NULL pointer dereference, address: 0000000000000000I think I know what happens there. Can you test a hackpatch (below) with my patch
_notbeingreverted_?drivers/i2c/busses/i2c-scmi.c +0
-0drivers/i2c/busses/i2c-scmi.c static struct acpi_driver acpi_smbus_cmi_driver = { · line 434
Quoted 9 lines
drivers/i2c/busses/i2c-scmi.c +3
-0@@ -426,6 +426,9 @@ static struct acpi_driver acpi_smbus_cmi_driver = { .add = acpi_smbus_cmi_add, .remove = acpi_smbus_cmi_remove, }, + .drv = { + .acpi_match_table = acpi_smbus_cmi_ids, + }, };module_acpi_driver (acpi_smbus_cmi_driver);Hi,
Quoted 1 line
I applied your patch and the system boots now. Good job :)
Yeah, but the initial conversion will be transformed to much bigger since maintainer doesn't want the fix in the ACPI glue code for the (deprecated) ACPI drivers.
So there will be no patches soon, but I will Cc you to anything I will come up with in the future. Thanks for testing and reporting!
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 28 lines · Andy Shevchenko
Quoted 27 lines · Josef Johansson
Quoted 15 lines · Andy Shevchenko
Quoted 6 lines · Josef Johansson
On 7/8/22 14:09, Andy Shevchenko wrote:
I tried build Linux 6.0 and run under Xen 4.14.5. I got a kernel null pointer dereferenced while booting. Reverting this commit allowed the system to boot.Since I do not have any way of capturing the error except camera (it's a long message), here's my best try.
BUG: kernel NULL pointer dereference, address: 0000000000000000I think I know what happens there. Can you test a hackpatch (below) with my patch
_notbeingreverted_?drivers/i2c/busses/i2c-scmi.c +0
-0drivers/i2c/busses/i2c-scmi.c static struct acpi_driver acpi_smbus_cmi_driver = { · line 434
Quoted 9 lines
drivers/i2c/busses/i2c-scmi.c +3
-0@@ -426,6 +426,9 @@ static struct acpi_driver acpi_smbus_cmi_driver = { .add = acpi_smbus_cmi_add, .remove = acpi_smbus_cmi_remove, }, + .drv = { + .acpi_match_table = acpi_smbus_cmi_ids, + }, };module_acpi_driver (acpi_smbus_cmi_driver);Hi,
Quoted 8 lines
Quoted 1 line
I applied your patch and the system boots now. Good job :)
Yeah, but the initial conversion will be transformed to much bigger since maintainer doesn't want the fix in the ACPI glue code for the (deprecated) ACPI drivers.
So there will be no patches soon, but I will Cc you to anything I will come up with in the future. Thanks for testing and reporting!
Oh, ok! Yeah for sure, obviously I have a pretty broken setup :)
Good luck with the bigger transformation!
Regards
- Josef