arm64: dts: imx8mp-verdin: add cpu-supply
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mp-verdin: add cpu-supply
From: Max Krummenacher <[email protected]>
Add the cpu-supply property to all CPU nodes to enable the cpufreq driver.
---
.../boot/dts/freescale/imx8mp-verdin.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +17 -1
@@ -146,6 +146,22 @@ reserved-memory { }; }; +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + &cpu_alert0 { temperature = <95000>; };
@@ -453,7 +469,7 @@ BUCK1 { regulator-ramp-delay = <3125>; }; - BUCK2 { + reg_vdd_arm: BUCK2 { nxp,dvs-run-voltage = <950000>; nxp,dvs-standby-voltage = <850000>; regulator-always-on;
Signature · 1 line
2.35.3
Hi Max,
Thank you for the patch.
Quoted 6 lines · Max Krummenacher
From: Max Krummenacher <[email protected]>
Add the cpu-supply property to all CPU nodes to enable the cpufreq driver.
Signed-off-by Max Krummenacher <[email protected]>
Quoted 41 lines
---
.../boot/dts/freescale/imx8mp-verdin.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +17
-1@@ -146,6 +146,22 @@ reserved-memory { }; }; +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + &cpu_alert0 { temperature = <95000>; };@@ -453,7 +469,7 @@ BUCK1 { regulator-ramp-delay = <3125>; }; - BUCK2 { + reg_vdd_arm: BUCK2 { nxp,dvs-run-voltage = <950000>; nxp,dvs-standby-voltage = <850000>; regulator-always-on;
Signature · 3 lines
Regards, Laurent Pinchart
Quoted 6 lines · Max Krummenacher
From: Max Krummenacher <[email protected]>
Add the cpu-supply property to all CPU nodes to enable the cpufreq driver.
Signed-off-by Max Krummenacher <[email protected]>
Quoted 42 lines
---
.../boot/dts/freescale/imx8mp-verdin.dtsi | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)arch/arm64/boot/dts/freescale/imx8mp- renamed from arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +0
-0
verdin.dtsi
indexf062fdbb2719..dbc22b672fb3100644arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +0
-0@@ -146,6 +146,22 @@ reserved-memory { }; };
+&A53_0 {
+ cpu-supply = <®_vdd_arm>;arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +14
-0+}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; +&cpu_alert0 {
temperature = <95000>;
};arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +0
-0@@ -453,7 +469,7 @@ BUCK1 { regulator-ramp-delay = <3125>; };
- BUCK2 {
+ reg_vdd_arm: BUCK2 { nxp,dvs-run-voltage = <950000>; nxp,dvs-standby-voltage = <850000>; regulator-always-on;
Quoted 6 lines · Max Krummenacher
From: Max Krummenacher <[email protected]>
Add the cpu-supply property to all CPU nodes to enable the cpufreq driver.
Signed-off-by Max Krummenacher <[email protected]>
This would need a fixes tag IMO:
Francesco
Shawn Guo
AppliedQuoted 6 lines · Max Krummenacher
From: Max Krummenacher <[email protected]>
Add the cpu-supply property to all CPU nodes to enable the cpufreq driver.
Signed-off-by Max Krummenacher <[email protected]>
Applied, thanks!