Skip to contentSkip to conversation

Introduce Microsoft Azure Network Adapter (MANA) RDMA driver

PATCH Superseded [email protected] 3 participants 19 messages Sep 21, 2022 – Sep 22, 2022

Subsystems (5)

v6 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

v6 cover Introduce Microsoft Azure Network Adapter (MANA) RDMA driver

From: Long Li <[email protected]>

This patchset implements a RDMA driver for Microsoft Azure Network Adapter (MANA). In MANA, the RDMA device is modeled as an auxiliary device to the Ethernet device.

The first 11 patches modify the MANA Ethernet driver to support RDMA driver. The last patch implementes the RDMA driver.

The user-mode of the driver is being reviewed at:
https://github.com/linux-rdma/rdma-core/pull/1177

Ajay Sharma (3):
net: mana: Set the DMA device max segment size
net: mana: Define and process GDMA response code
GDMA_STATUS_MORE_ENTRIES
net: mana: Define data structures for protection domain and memory
registration

Long Li (9):
net: mana: Add support for auxiliary device
net: mana: Record the physical address for doorbell page region
net: mana: Handle vport sharing between devices
net: mana: Add functions for allocating doorbell page from GDMA
net: mana: Export Work Queue functions for use by RDMA driver
net: mana: Record port number in netdev
net: mana: Move header files to a common location
net: mana: Define max values for SGL entries RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

 MAINTAINERS                                   |   4 +
 drivers/infiniband/Kconfig                    |   1 +
 drivers/infiniband/hw/Makefile                |   1 +
 drivers/infiniband/hw/mana/Kconfig            |   7 +
 drivers/infiniband/hw/mana/Makefile           |   4 +
 drivers/infiniband/hw/mana/cq.c               |  80 +++
 drivers/infiniband/hw/mana/device.c           | 129 ++++
 drivers/infiniband/hw/mana/main.c             | 555 ++++++++++++++++++
 drivers/infiniband/hw/mana/mana_ib.h          | 165 ++++++
 drivers/infiniband/hw/mana/mr.c               | 133 +++++
 drivers/infiniband/hw/mana/qp.c               | 501 ++++++++++++++++
 drivers/infiniband/hw/mana/wq.c               | 114 ++++
 drivers/net/ethernet/microsoft/Kconfig        |   1 +
 .../net/ethernet/microsoft/mana/gdma_main.c   |  96 ++-
 .../net/ethernet/microsoft/mana/hw_channel.c  |   6 +-
 .../net/ethernet/microsoft/mana/mana_bpf.c    |   2 +-
 drivers/net/ethernet/microsoft/mana/mana_en.c | 176 +++++-
 .../ethernet/microsoft/mana/mana_ethtool.c    |   2 +-
 .../net/ethernet/microsoft/mana/shm_channel.c |   2 +-
 .../microsoft => include/net}/mana/gdma.h     | 162 ++++-
 .../net}/mana/hw_channel.h                    |   0
 .../microsoft => include/net}/mana/mana.h     |  23 +-
 include/net/mana/mana_auxiliary.h             |  10 +
 .../net}/mana/shm_channel.h                   |   0
 include/uapi/rdma/ib_user_ioctl_verbs.h       |   1 +
 include/uapi/rdma/mana-abi.h                  |  66 +++
 26 files changed, 2196 insertions(+), 45 deletions(-)
 create mode 100644 drivers/infiniband/hw/mana/Kconfig
 create mode 100644 drivers/infiniband/hw/mana/Makefile
 create mode 100644 drivers/infiniband/hw/mana/cq.c
 create mode 100644 drivers/infiniband/hw/mana/device.c
 create mode 100644 drivers/infiniband/hw/mana/main.c
 create mode 100644 drivers/infiniband/hw/mana/mana_ib.h
 create mode 100644 drivers/infiniband/hw/mana/mr.c
 create mode 100644 drivers/infiniband/hw/mana/qp.c
 create mode 100644 drivers/infiniband/hw/mana/wq.c
 rename {drivers/net/ethernet/microsoft => include/net}/mana/gdma.h (80%)
 rename {drivers/net/ethernet/microsoft => include/net}/mana/hw_channel.h (100%)
 rename {drivers/net/ethernet/microsoft => include/net}/mana/mana.h (95%)
 create mode 100644 include/net/mana/mana_auxiliary.h
 rename {drivers/net/ethernet/microsoft => include/net}/mana/shm_channel.h (100%)
 create mode 100644 include/uapi/rdma/mana-abi.h
Signature · 1 line
2.17.1
#1 lore raw

PATCH v6 1/12 net: mana: Add support for auxiliary device

From: Long Li <[email protected]>

In preparation for supporting MANA RDMA driver, add support for auxiliary device in the Ethernet driver. The RDMA device is modeled as an auxiliary device to the Ethernet device.

---
Change log:
v3: define mana_adev_idx_alloc and mana_adev_idx_free as static

 drivers/net/ethernet/microsoft/Kconfig        |  1 +
 drivers/net/ethernet/microsoft/mana/gdma.h    |  2 +
 .../ethernet/microsoft/mana/mana_auxiliary.h  | 10 +++
 drivers/net/ethernet/microsoft/mana/mana_en.c | 84 ++++++++++++++++++-
 4 files changed, 96 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ethernet/microsoft/mana/mana_auxiliary.h
drivers/net/ethernet/microsoft/Kconfig +1 -0
index fe4e7a7d9c0b..090e6b983243 100644
@@ -19,6 +19,7 @@ config MICROSOFT_MANA
 	tristate "Microsoft Azure Network Adapter (MANA) support"
 	depends on PCI_MSI && X86_64
 	depends on PCI_HYPERV
+	select AUXILIARY_BUS
 	help
 	  This driver supports Microsoft Azure Network Adapter (MANA).
 	  So far, the driver is only supported on X86_64.
drivers/net/ethernet/microsoft/mana/gdma.h +2 -0
index 4a6efe6ada08..f321a2616d03 100644
@@ -204,6 +204,8 @@ struct gdma_dev {
 
 	/* GDMA driver specific pointer */
 	void *driver_data;
+
+	struct auxiliary_device *adev;
 };
 
 #define MINIMUM_SUPPORTED_PAGE_SIZE PAGE_SIZE
drivers/net/ethernet/microsoft/mana/mana_auxiliary.h new file +10 -0
new file mode 100644
index 000000000000..373d59756846
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2022, Microsoft Corporation. */
+
+#include "mana.h"
+#include <linux/auxiliary_bus.h>
+
+struct mana_adev {
+	struct auxiliary_device adev;
+	struct gdma_dev *mdev;
+};
drivers/net/ethernet/microsoft/mana/mana_en.c +83 -1

114 lines not on this page · raw message

Signature · 1 line
2.17.1
#2 lore raw

PATCH v6 2/12 net: mana: Record the physical address for doorbell page region

In reply to [email protected]

From: Long Li <[email protected]>

For supporting RDMA device with multiple user contexts with their individual doorbell pages, record the start address of doorbell page region for use by the RDMA driver to allocate user context doorbell IDs.

---
Change log:
v6: rebased to rdma-next

 drivers/net/ethernet/microsoft/mana/gdma.h      | 2 ++
 drivers/net/ethernet/microsoft/mana/gdma_main.c | 4 ++++
 2 files changed, 6 insertions(+)
drivers/net/ethernet/microsoft/mana/gdma.h +2 -0
index f321a2616d03..72eaec2470c0 100644
@@ -351,9 +351,11 @@ struct gdma_context {
 	u32			test_event_eq_id;
 
 	bool			is_pf;
+	phys_addr_t		bar0_pa;
 	void __iomem		*bar0_va;
 	void __iomem		*shm_base;
 	void __iomem		*db_page_base;
+	phys_addr_t		phys_db_page_base;
 	u32 db_page_size;
 
 	/* Shared memory chanenl (used to bootstrap HWC) */
drivers/net/ethernet/microsoft/mana/gdma_main.c +4 -0
index 5f9240182351..0cfe5f15458e 100644
@@ -44,6 +44,9 @@ static void mana_gd_init_vf_regs(struct pci_dev *pdev)
 	gc->db_page_base = gc->bar0_va +
 				mana_gd_r64(gc, GDMA_REG_DB_PAGE_OFFSET);
 
+	gc->phys_db_page_base = gc->bar0_pa +
+				mana_gd_r64(gc, GDMA_REG_DB_PAGE_OFFSET);
+
 	gc->shm_base = gc->bar0_va + mana_gd_r64(gc, GDMA_REG_SHM_OFFSET);
 }
 
@@ -1367,6 +1370,7 @@ static int mana_gd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	mutex_init(&gc->eq_test_event_mutex);
 	pci_set_drvdata(pdev, gc);
+	gc->bar0_pa = pci_resource_start(pdev, 0);
 
 	bar0_va = pci_iomap(pdev, bar, 0);
 	if (!bar0_va)
Signature · 1 line
2.17.1
#3 lore raw

PATCH v6 3/12 net: mana: Handle vport sharing between devices

In reply to [email protected]

From: Long Li <[email protected]>

For outgoing packets, the PF requires the VF to configure the vport with corresponding protection domain and doorbell ID for the kernel or user context. The vport can't be shared between different contexts.

Implement the logic to exclusively take over the vport by either the Ethernet device or RDMA device.

---
Change log:
v2: use refcount instead of directly using atomic variables
v4: change to mutex to avoid possible race with refcount
v5: add detailed comments explaining vport sharing, use EXPORT_SYMBOL_NS
v6: rebased to rdma-next

 drivers/net/ethernet/microsoft/mana/mana.h    |  7 +++
 drivers/net/ethernet/microsoft/mana/mana_en.c | 53 ++++++++++++++++++-
 2 files changed, 58 insertions(+), 2 deletions(-)
drivers/net/ethernet/microsoft/mana/mana.h +7 -0
index d58be64374c8..2883a08dbfb5 100644
@@ -380,6 +380,10 @@ struct mana_port_context {
 	mana_handle_t port_handle;
 	mana_handle_t pf_filter_handle;
 
+	/* Mutex for sharing access to vport_use_count */
+	struct mutex vport_mutex;
+	int vport_use_count;
+
 	u16 port_idx;
 
 	bool port_is_up;
@@ -631,4 +635,7 @@ struct mana_tx_package {
 	struct gdma_posted_wqe_info wqe_info;
 };
 
+int mana_cfg_vport(struct mana_port_context *apc, u32 protection_dom_id,
+		   u32 doorbell_pg_id);
+void mana_uncfg_vport(struct mana_port_context *apc);
 #endif /* _MANA_H */
drivers/net/ethernet/microsoft/mana/mana_en.c +51 -2

91 lines not on this page · raw message

Signature · 1 line
2.17.1
#4 lore raw

PATCH v6 4/12 net: mana: Add functions for allocating doorbell page from GDMA

In reply to [email protected]

From: Long Li <[email protected]>

The RDMA device needs to allocate doorbell pages for each user context. Implement those functions and expose them for use by the RDMA driver.

---
Change log:
v4: use EXPORT_SYMBOL_NS

 drivers/net/ethernet/microsoft/mana/gdma.h    | 29 ++++++++++
 .../net/ethernet/microsoft/mana/gdma_main.c   | 56 +++++++++++++++++++
 2 files changed, 85 insertions(+)
drivers/net/ethernet/microsoft/mana/gdma.h +29 -0
index 72eaec2470c0..0ee3615152b8 100644
@@ -22,11 +22,15 @@ enum gdma_request_type {
 	GDMA_GENERATE_TEST_EQE		= 10,
 	GDMA_CREATE_QUEUE		= 12,
 	GDMA_DISABLE_QUEUE		= 13,
+	GDMA_ALLOCATE_RESOURCE_RANGE	= 22,
+	GDMA_DESTROY_RESOURCE_RANGE	= 24,
 	GDMA_CREATE_DMA_REGION		= 25,
 	GDMA_DMA_REGION_ADD_PAGES	= 26,
 	GDMA_DESTROY_DMA_REGION		= 27,
 };
 
+#define GDMA_RESOURCE_DOORBELL_PAGE	27
+
 enum gdma_queue_type {
 	GDMA_INVALID_QUEUE,
 	GDMA_SQ,
@@ -578,6 +582,26 @@ struct gdma_register_device_resp {
 	u32 db_id;
 }; /* HW DATA */
 
+struct gdma_allocate_resource_range_req {
+	struct gdma_req_hdr hdr;
+	u32 resource_type;
+	u32 num_resources;
+	u32 alignment;
+	u32 allocated_resources;
+};
+
+struct gdma_allocate_resource_range_resp {
+	struct gdma_resp_hdr hdr;
+	u32 allocated_resources;
+};
+
+struct gdma_destroy_resource_range_req {
+	struct gdma_req_hdr hdr;
+	u32 resource_type;
+	u32 num_resources;
+	u32 allocated_resources;
+};
+
 /* GDMA_CREATE_QUEUE */
 struct gdma_create_queue_req {
 	struct gdma_req_hdr hdr;
@@ -686,4 +710,9 @@ void mana_gd_free_memory(struct gdma_mem_info *gmi);
 
 int mana_gd_send_request(struct gdma_context *gc, u32 req_len, const void *req,
 			 u32 resp_len, void *resp);
+
+int mana_gd_allocate_doorbell_page(struct gdma_context *gc, int *doorbell_page);
+
+int mana_gd_destroy_doorbell_page(struct gdma_context *gc, int doorbell_page);
+
 #endif /* _GDMA_H */
drivers/net/ethernet/microsoft/mana/gdma_main.c +56 -0

62 lines not on this page · raw message

Signature · 1 line
2.17.1
#5 lore raw

PATCH v6 5/12 net: mana: Set the DMA device max segment size

In reply to [email protected]

From: Ajay Sharma <[email protected]>

MANA hardware doesn't have any restrictions on the DMA segment size, set it to the max allowed value.

---
Change log:
v2: Use the max allowed value as the hardware doesn't have any limit

 drivers/net/ethernet/microsoft/mana/gdma_main.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/ethernet/microsoft/mana/gdma_main.c +6 -0
index 63544ca9e238..b44548136027 100644
@@ -1419,6 +1419,12 @@ static int mana_gd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto release_region;
 
+	err = dma_set_max_seg_size(&pdev->dev, UINT_MAX);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to set dma device segment size\n");
+		goto release_region;
+	}
+
 	err = -ENOMEM;
 	gc = vzalloc(sizeof(*gc));
 	if (!gc)
Signature · 1 line
2.17.1
#6 lore raw

PATCH v6 6/12 net: mana: Export Work Queue functions for use by RDMA driver

In reply to [email protected]

From: Long Li <[email protected]>

RDMA device may need to create Ethernet device queues for use by Queue Pair type RAW. This allows a user-mode context accesses Ethernet hardware queues. Export the supporting functions for use by the RDMA driver.

---
Change log:
v3: format/coding style changes
v5: remove unused defintions, use EXPORT_SYMBOL_NS, rearrange some defintions to a later patch in the series

 drivers/net/ethernet/microsoft/mana/gdma_main.c |  1 +
 drivers/net/ethernet/microsoft/mana/mana.h      |  9 +++++++++
 drivers/net/ethernet/microsoft/mana/mana_en.c   | 16 +++++++++-------
 3 files changed, 19 insertions(+), 7 deletions(-)
drivers/net/ethernet/microsoft/mana/gdma_main.c +1 -0
index b44548136027..6eae7297e5f5 100644
@@ -152,6 +152,7 @@ int mana_gd_send_request(struct gdma_context *gc, u32 req_len, const void *req,
 
 	return mana_hwc_send_request(hwc, req_len, req, resp_len, resp);
 }
+EXPORT_SYMBOL_NS(mana_gd_send_request, NET_MANA);
 
 int mana_gd_alloc_memory(struct gdma_context *gc, unsigned int length,
 			 struct gdma_mem_info *gmi)
drivers/net/ethernet/microsoft/mana/mana.h +9 -0
index 2883a08dbfb5..6e9e86fb4c02 100644
@@ -635,6 +635,15 @@ struct mana_tx_package {
 	struct gdma_posted_wqe_info wqe_info;
 };
 
+int mana_create_wq_obj(struct mana_port_context *apc,
+		       mana_handle_t vport,
+		       u32 wq_type, struct mana_obj_spec *wq_spec,
+		       struct mana_obj_spec *cq_spec,
+		       mana_handle_t *wq_obj);
+
+void mana_destroy_wq_obj(struct mana_port_context *apc, u32 wq_type,
+			 mana_handle_t wq_obj);
+
 int mana_cfg_vport(struct mana_port_context *apc, u32 protection_dom_id,
 		   u32 doorbell_pg_id);
 void mana_uncfg_vport(struct mana_port_context *apc);
drivers/net/ethernet/microsoft/mana/mana_en.c +9 -7
index ef843a4560bb..345e3a47da3e 100644
@@ -792,11 +792,11 @@ static int mana_cfg_vport_steering(struct mana_port_context *apc,
 	return err;
 }
 
-static int mana_create_wq_obj(struct mana_port_context *apc,
-			      mana_handle_t vport,
-			      u32 wq_type, struct mana_obj_spec *wq_spec,
-			      struct mana_obj_spec *cq_spec,
-			      mana_handle_t *wq_obj)
+int mana_create_wq_obj(struct mana_port_context *apc,
+		       mana_handle_t vport,
+		       u32 wq_type, struct mana_obj_spec *wq_spec,
+		       struct mana_obj_spec *cq_spec,
+		       mana_handle_t *wq_obj)
 {
 	struct mana_create_wqobj_resp resp = {};
 	struct mana_create_wqobj_req req = {};
@@ -845,9 +845,10 @@ static int mana_create_wq_obj(struct mana_port_context *apc,
 out:
 	return err;
 }
+EXPORT_SYMBOL_NS(mana_create_wq_obj, NET_MANA);
 
-static void mana_destroy_wq_obj(struct mana_port_context *apc, u32 wq_type,
-				mana_handle_t wq_obj)
+void mana_destroy_wq_obj(struct mana_port_context *apc, u32 wq_type,
+			 mana_handle_t wq_obj)
 {
 	struct mana_destroy_wqobj_resp resp = {};
 	struct mana_destroy_wqobj_req req = {};
@@ -872,6 +873,7 @@ static void mana_destroy_wq_obj(struct mana_port_context *apc, u32 wq_type,
 		netdev_err(ndev, "Failed to destroy WQ object: %d, 0x%x\n", err,
 			   resp.hdr.status);
 }
+EXPORT_SYMBOL_NS(mana_destroy_wq_obj, NET_MANA);
 
 static void mana_destroy_eq(struct mana_context *ac)
 {
Signature · 1 line
2.17.1
#7 lore raw

PATCH v6 7/12 net: mana: Record port number in netdev

In reply to [email protected]

From: Long Li <[email protected]>

The port number is useful for user-mode application to identify this net device based on port index. Set to the correct value in ndev.

---
 drivers/net/ethernet/microsoft/mana/mana_en.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/microsoft/mana/mana_en.c +1 -0
index 345e3a47da3e..17cfee292cfb 100644
@@ -2133,6 +2133,7 @@ static int mana_probe_port(struct mana_context *ac, int port_idx,
 	ndev->max_mtu = ndev->mtu;
 	ndev->min_mtu = ndev->mtu;
 	ndev->needed_headroom = MANA_HEADROOM;
+	ndev->dev_port = port_idx;
 	SET_NETDEV_DEV(ndev, gc->dev);
 
 	netif_carrier_off(ndev);
Signature · 1 line
2.17.1
#8 lore raw

PATCH v6 8/12 net: mana: Move header files to a common location

In reply to [email protected]

From: Long Li <[email protected]>

In preparation to add MANA RDMA driver, move all the required header files to a common location for use by both Ethernet and RDMA drivers.

---
Change log:
v2: Move headers to include/net/mana, instead of include/linux/mana

 MAINTAINERS                                                   | 1 +
 drivers/net/ethernet/microsoft/mana/gdma_main.c               | 2 +-
 drivers/net/ethernet/microsoft/mana/hw_channel.c              | 4 ++--
 drivers/net/ethernet/microsoft/mana/mana_bpf.c                | 2 +-
 drivers/net/ethernet/microsoft/mana/mana_en.c                 | 4 ++--
 drivers/net/ethernet/microsoft/mana/mana_ethtool.c            | 2 +-
 drivers/net/ethernet/microsoft/mana/shm_channel.c             | 2 +-
 {drivers/net/ethernet/microsoft => include/net}/mana/gdma.h   | 0
 .../net/ethernet/microsoft => include/net}/mana/hw_channel.h  | 0
 {drivers/net/ethernet/microsoft => include/net}/mana/mana.h   | 0
 .../ethernet/microsoft => include/net}/mana/mana_auxiliary.h  | 0
 .../net/ethernet/microsoft => include/net}/mana/shm_channel.h | 0
 12 files changed, 9 insertions(+), 8 deletions(-)
 rename {drivers/net/ethernet/microsoft => include/net}/mana/gdma.h (100%)
 rename {drivers/net/ethernet/microsoft => include/net}/mana/hw_channel.h (100%)
 rename {drivers/net/ethernet/microsoft => include/net}/mana/mana.h (100%)
 rename {drivers/net/ethernet/microsoft => include/net}/mana/mana_auxiliary.h (100%)
 rename {drivers/net/ethernet/microsoft => include/net}/mana/shm_channel.h (100%)
MAINTAINERS +1 -0
index 8a5012ba6ff9..8b9a50756c7e 100644
@@ -9457,6 +9457,7 @@ F:	include/asm-generic/hyperv-tlfs.h
 F:	include/asm-generic/mshyperv.h
 F:	include/clocksource/hyperv_timer.h
 F:	include/linux/hyperv.h
+F:	include/net/mana
 F:	include/uapi/linux/hyperv.h
 F:	net/vmw_vsock/hyperv_transport.c
 F:	tools/hv/
drivers/net/ethernet/microsoft/mana/gdma_main.c +1 -1
index 6eae7297e5f5..c8a4f7b580b0 100644
@@ -6,7 +6,7 @@
 #include <linux/utsname.h>
 #include <linux/version.h>
 
-#include "mana.h"
+#include <net/mana/mana.h>
 
 static u32 mana_gd_r32(struct gdma_context *g, u64 offset)
 {
drivers/net/ethernet/microsoft/mana/hw_channel.c +2 -2
index 543a5d5c304f..76829ab43d40 100644
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
 /* Copyright (c) 2021, Microsoft Corporation. */
 
-#include "gdma.h"
-#include "hw_channel.h"
+#include <net/mana/gdma.h>
+#include <net/mana/hw_channel.h>
 
 static int mana_hwc_get_msg_index(struct hw_channel_context *hwc, u16 *msg_id)
 {
drivers/net/ethernet/microsoft/mana/mana_bpf.c +1 -1
index 421fd39ff3a8..3caea631229c 100644
@@ -8,7 +8,7 @@
 #include <linux/bpf_trace.h>
 #include <net/xdp.h>
 
-#include "mana.h"
+#include <net/mana/mana.h>
 
 void mana_xdp_tx(struct sk_buff *skb, struct net_device *ndev)
 {
drivers/net/ethernet/microsoft/mana/mana_en.c +2 -2
index 17cfee292cfb..a79a57644ec3 100644
@@ -12,8 +12,8 @@
 #include <net/checksum.h>
 #include <net/ip6_checksum.h>
 
-#include "mana.h"
-#include "mana_auxiliary.h"
+#include <net/mana/mana.h>
+#include <net/mana/mana_auxiliary.h>
 
 static DEFINE_IDA(mana_adev_ida);
 
drivers/net/ethernet/microsoft/mana/mana_ethtool.c +1 -1
index c530db76880f..6f98de6d7440 100644
@@ -5,7 +5,7 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 
-#include "mana.h"
+#include <net/mana/mana.h>
 
 static const struct {
 	char name[ETH_GSTRING_LEN];
drivers/net/ethernet/microsoft/mana/shm_channel.c +1 -1
index da255da62176..5553af9c8085 100644
@@ -6,7 +6,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 
-#include "shm_channel.h"
+#include <net/mana/shm_channel.h>
 
 #define PAGE_FRAME_L48_WIDTH_BYTES 6
 #define PAGE_FRAME_L48_WIDTH_BITS (PAGE_FRAME_L48_WIDTH_BYTES * 8)
include/net/mana/gdma.h renamed from drivers/net/ethernet/microsoft/mana/gdma.h +0 -0
similarity index 100%
rename from drivers/net/ethernet/microsoft/mana/gdma.h
rename to include/net/mana/gdma.h
include/net/mana/hw_channel.h renamed from drivers/net/ethernet/microsoft/mana/hw_channel.h +0 -0
similarity index 100%
rename from drivers/net/ethernet/microsoft/mana/hw_channel.h
rename to include/net/mana/hw_channel.h
include/net/mana/mana.h renamed from drivers/net/ethernet/microsoft/mana/mana.h +0 -0
similarity index 100%
rename from drivers/net/ethernet/microsoft/mana/mana.h
rename to include/net/mana/mana.h
include/net/mana/mana_auxiliary.h renamed from drivers/net/ethernet/microsoft/mana/mana_auxiliary.h +0 -0
similarity index 100%
rename from drivers/net/ethernet/microsoft/mana/mana_auxiliary.h
rename to include/net/mana/mana_auxiliary.h
include/net/mana/shm_channel.h renamed from drivers/net/ethernet/microsoft/mana/shm_channel.h +0 -0
similarity index 100%
rename from drivers/net/ethernet/microsoft/mana/shm_channel.h
rename to include/net/mana/shm_channel.h
Signature · 1 line
2.17.1
#9 lore raw

PATCH v6 9/12 net: mana: Define max values for SGL entries

In reply to [email protected]

From: Long Li <[email protected]>

The number of maximum SGl entries should be computed from the maximum WQE size for the intended queue type and the corresponding OOB data size. This guarantees the hardware queue can successfully queue requests up to the queue depth exposed to the upper layer.

---
 drivers/net/ethernet/microsoft/mana/mana_en.c | 2 +-
 include/net/mana/gdma.h                       | 7 +++++++
 include/net/mana/mana.h                       | 4 +---
 3 files changed, 9 insertions(+), 4 deletions(-)
drivers/net/ethernet/microsoft/mana/mana_en.c +1 -1
index a79a57644ec3..08d15effc824 100644
@@ -189,7 +189,7 @@ int mana_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	pkg.wqe_req.client_data_unit = 0;
 
 	pkg.wqe_req.num_sge = 1 + skb_shinfo(skb)->nr_frags;
-	WARN_ON_ONCE(pkg.wqe_req.num_sge > 30);
+	WARN_ON_ONCE(pkg.wqe_req.num_sge > MAX_TX_WQE_SGL_ENTRIES);
 
 	if (pkg.wqe_req.num_sge <= ARRAY_SIZE(pkg.sgl_array)) {
 		pkg.wqe_req.sgl = pkg.sgl_array;
include/net/mana/gdma.h +7 -0
index 0ee3615152b8..9b050aabf76e 100644
@@ -431,6 +431,13 @@ struct gdma_wqe {
 #define MAX_TX_WQE_SIZE 512
 #define MAX_RX_WQE_SIZE 256
 
+#define MAX_TX_WQE_SGL_ENTRIES	((GDMA_MAX_SQE_SIZE -			   \
+			sizeof(struct gdma_sge) - INLINE_OOB_SMALL_SIZE) / \
+			sizeof(struct gdma_sge))
+
+#define MAX_RX_WQE_SGL_ENTRIES	((GDMA_MAX_RQE_SIZE -			   \
+			sizeof(struct gdma_sge)) / sizeof(struct gdma_sge))
+
 struct gdma_cqe {
 	u32 cqe_data[GDMA_COMP_DATA_SIZE / 4];
 
include/net/mana/mana.h +1 -3
index 6e9e86fb4c02..713a8f8cca9a 100644
@@ -265,8 +265,6 @@ struct mana_cq {
 	int budget;
 };
 
-#define GDMA_MAX_RQE_SGES 15
-
 struct mana_recv_buf_oob {
 	/* A valid GDMA work request representing the data buffer. */
 	struct gdma_wqe_request wqe_req;
@@ -276,7 +274,7 @@ struct mana_recv_buf_oob {
 
 	/* SGL of the buffer going to be sent has part of the work request. */
 	u32 num_sge;
-	struct gdma_sge sgl[GDMA_MAX_RQE_SGES];
+	struct gdma_sge sgl[MAX_RX_WQE_SGL_ENTRIES];
 
 	/* Required to store the result of mana_gd_post_work_request.
 	 * gdma_posted_wqe_info.wqe_size_in_bu is required for progressing the
Signature · 1 line
2.17.1
#10 lore raw

PATCH v6 10/12 net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES

In reply to [email protected]

From: Ajay Sharma <[email protected]>

When doing memory registration, the PF may respond with GDMA_STATUS_MORE_ENTRIES to indicate a follow request is needed. This is not an error and should be processed as expected.

---
 drivers/net/ethernet/microsoft/mana/hw_channel.c | 2 +-
 include/net/mana/gdma.h                          | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/microsoft/mana/hw_channel.c +1 -1
index 76829ab43d40..9d1507eba5b9 100644
@@ -836,7 +836,7 @@ int mana_hwc_send_request(struct hw_channel_context *hwc, u32 req_len,
 		goto out;
 	}
 
-	if (ctx->status_code) {
+	if (ctx->status_code && ctx->status_code != GDMA_STATUS_MORE_ENTRIES) {
 		dev_err(hwc->dev, "HWC: Failed hw_channel req: 0x%x\n",
 			ctx->status_code);
 		err = -EPROTO;
include/net/mana/gdma.h +2 -0
index 9b050aabf76e..42344cd5e8ce 100644
@@ -9,6 +9,8 @@
 
 #include "shm_channel.h"
 
+#define GDMA_STATUS_MORE_ENTRIES	0x00000105
+
 /* Structures labeled with "HW DATA" are exchanged with the hardware. All of
  * them are naturally aligned and hence don't need __packed.
  */
Signature · 1 line
2.17.1
#11 lore raw

PATCH v6 11/12 net: mana: Define data structures for protection domain and memory registration

In reply to [email protected]

From: Ajay Sharma <[email protected]>

The MANA hardware support protection domain and memory registration for use in RDMA environment. Add those definitions and expose them for use by the RDMA driver.

---
Change log:
v3: format/coding style changes
v5: remove unused code dealing with kernel-mode MR

 .../net/ethernet/microsoft/mana/gdma_main.c   |  27 ++--
 drivers/net/ethernet/microsoft/mana/mana_en.c |  18 +--
 include/net/mana/gdma.h                       | 120 +++++++++++++++++-
 3 files changed, 142 insertions(+), 23 deletions(-)
drivers/net/ethernet/microsoft/mana/gdma_main.c +17 -10
index c8a4f7b580b0..d1971cae8015 100644
@@ -254,7 +254,7 @@ static int mana_gd_create_hw_eq(struct gdma_context *gc,
 	req.type = queue->type;
 	req.pdid = queue->gdma_dev->pdid;
 	req.doolbell_id = queue->gdma_dev->doorbell;
-	req.gdma_region = queue->mem_info.gdma_region;
+	req.gdma_region = queue->mem_info.dma_region_handle;
 	req.queue_size = queue->queue_size;
 	req.log2_throttle_limit = queue->eq.log2_throttle_limit;
 	req.eq_pci_msix_index = queue->eq.msix_index;
@@ -268,7 +268,7 @@ static int mana_gd_create_hw_eq(struct gdma_context *gc,
 
 	queue->id = resp.queue_index;
 	queue->eq.disable_needed = true;
-	queue->mem_info.gdma_region = GDMA_INVALID_DMA_REGION;
+	queue->mem_info.dma_region_handle = GDMA_INVALID_DMA_REGION;
 	return 0;
 }
 
@@ -722,24 +722,30 @@ int mana_gd_create_hwc_queue(struct gdma_dev *gd,
 	return err;
 }
 
-static void mana_gd_destroy_dma_region(struct gdma_context *gc, u64 gdma_region)
+int mana_gd_destroy_dma_region(struct gdma_context *gc,
+			       gdma_obj_handle_t dma_region_handle)
 {
 	struct gdma_destroy_dma_region_req req = {};
 	struct gdma_general_resp resp = {};
 	int err;
 
-	if (gdma_region == GDMA_INVALID_DMA_REGION)
-		return;
+	if (dma_region_handle == GDMA_INVALID_DMA_REGION)
+		return 0;
 
 	mana_gd_init_req_hdr(&req.hdr, GDMA_DESTROY_DMA_REGION, sizeof(req),
 			     sizeof(resp));
-	req.gdma_region = gdma_region;
+	req.dma_region_handle = dma_region_handle;
 
 	err = mana_gd_send_request(gc, sizeof(req), &req, sizeof(resp), &resp);
-	if (err || resp.hdr.status)
+	if (err || resp.hdr.status) {
 		dev_err(gc->dev, "Failed to destroy DMA region: %d, 0x%x\n",
 			err, resp.hdr.status);
+		return -EPROTO;
+	}
+
+	return 0;
 }
+EXPORT_SYMBOL_NS(mana_gd_destroy_dma_region, NET_MANA);
 
 static int mana_gd_create_dma_region(struct gdma_dev *gd,
 				     struct gdma_mem_info *gmi)
@@ -784,14 +790,15 @@ static int mana_gd_create_dma_region(struct gdma_dev *gd,
 	if (err)
 		goto out;
 
-	if (resp.hdr.status || resp.gdma_region == GDMA_INVALID_DMA_REGION) {
+	if (resp.hdr.status ||
+	    resp.dma_region_handle == GDMA_INVALID_DMA_REGION) {
 		dev_err(gc->dev, "Failed to create DMA region: 0x%x\n",
 			resp.hdr.status);
 		err = -EPROTO;
 		goto out;
 	}
 
-	gmi->gdma_region = resp.gdma_region;
+	gmi->dma_region_handle = resp.dma_region_handle;
 out:
 	kfree(req);
 	return err;
@@ -914,7 +921,7 @@ void mana_gd_destroy_queue(struct gdma_context *gc, struct gdma_queue *queue)
 		return;
 	}
 
-	mana_gd_destroy_dma_region(gc, gmi->gdma_region);
+	mana_gd_destroy_dma_region(gc, gmi->dma_region_handle);
 	mana_gd_free_memory(gmi);
 	kfree(queue);
 }
drivers/net/ethernet/microsoft/mana/mana_en.c +10 -8
index 08d15effc824..7ca313c7b7b3 100644
@@ -1523,10 +1523,10 @@ static int mana_create_txq(struct mana_port_context *apc,
 		memset(&wq_spec, 0, sizeof(wq_spec));
 		memset(&cq_spec, 0, sizeof(cq_spec));
 
-		wq_spec.gdma_region = txq->gdma_sq->mem_info.gdma_region;
+		wq_spec.gdma_region = txq->gdma_sq->mem_info.dma_region_handle;
 		wq_spec.queue_size = txq->gdma_sq->queue_size;
 
-		cq_spec.gdma_region = cq->gdma_cq->mem_info.gdma_region;
+		cq_spec.gdma_region = cq->gdma_cq->mem_info.dma_region_handle;
 		cq_spec.queue_size = cq->gdma_cq->queue_size;
 		cq_spec.modr_ctx_id = 0;
 		cq_spec.attached_eq = cq->gdma_cq->cq.parent->id;
@@ -1541,8 +1541,10 @@ static int mana_create_txq(struct mana_port_context *apc,
 		txq->gdma_sq->id = wq_spec.queue_index;
 		cq->gdma_cq->id = cq_spec.queue_index;
 
-		txq->gdma_sq->mem_info.gdma_region = GDMA_INVALID_DMA_REGION;
-		cq->gdma_cq->mem_info.gdma_region = GDMA_INVALID_DMA_REGION;
+		txq->gdma_sq->mem_info.dma_region_handle =
+			GDMA_INVALID_DMA_REGION;
+		cq->gdma_cq->mem_info.dma_region_handle =
+			GDMA_INVALID_DMA_REGION;
 
 		txq->gdma_txq_id = txq->gdma_sq->id;
 
@@ -1753,10 +1755,10 @@ static struct mana_rxq *mana_create_rxq(struct mana_port_context *apc,
 
 	memset(&wq_spec, 0, sizeof(wq_spec));
 	memset(&cq_spec, 0, sizeof(cq_spec));
-	wq_spec.gdma_region = rxq->gdma_rq->mem_info.gdma_region;
+	wq_spec.gdma_region = rxq->gdma_rq->mem_info.dma_region_handle;
 	wq_spec.queue_size = rxq->gdma_rq->queue_size;
 
-	cq_spec.gdma_region = cq->gdma_cq->mem_info.gdma_region;
+	cq_spec.gdma_region = cq->gdma_cq->mem_info.dma_region_handle;
 	cq_spec.queue_size = cq->gdma_cq->queue_size;
 	cq_spec.modr_ctx_id = 0;
 	cq_spec.attached_eq = cq->gdma_cq->cq.parent->id;
@@ -1769,8 +1771,8 @@ static struct mana_rxq *mana_create_rxq(struct mana_port_context *apc,
 	rxq->gdma_rq->id = wq_spec.queue_index;
 	cq->gdma_cq->id = cq_spec.queue_index;
 
-	rxq->gdma_rq->mem_info.gdma_region = GDMA_INVALID_DMA_REGION;
-	cq->gdma_cq->mem_info.gdma_region = GDMA_INVALID_DMA_REGION;
+	rxq->gdma_rq->mem_info.dma_region_handle = GDMA_INVALID_DMA_REGION;
+	cq->gdma_cq->mem_info.dma_region_handle = GDMA_INVALID_DMA_REGION;
 
 	rxq->gdma_id = rxq->gdma_rq->id;
 	cq->gdma_id = cq->gdma_cq->id;
include/net/mana/gdma.h +115 -5

174 lines not on this page · raw message

Signature · 1 line
2.17.1
#12 lore raw

PATCH v6 12/12 RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

In reply to [email protected]

From: Long Li <[email protected]>

Add a RDMA VF driver for Microsoft Azure Network Adapter (MANA).

---
Change log:
v2:
Changed coding sytles/formats
Checked undersize for udata length
Changed all logging to use ibdev_xxx()
Avoided page array copy when doing MR
Sorted driver ops
Fixed warnings reported by kernel test robot <[email protected]>

v3:
More coding sytle/format changes

v4:
Process error on hardware vport configuration

v5:
Change licenses to GPL-2.0-only
Fix error handling in mana_ib_gd_create_dma_region()

v6:
rebased to rdma-next
removed redundant initialization to return value in mana_ib_probe() added missing tabs at the end of mana_ib_gd_create_dma_region()

 MAINTAINERS                             |   3 +
 drivers/infiniband/Kconfig              |   1 +
 drivers/infiniband/hw/Makefile          |   1 +
 drivers/infiniband/hw/mana/Kconfig      |   7 +
 drivers/infiniband/hw/mana/Makefile     |   4 +
 drivers/infiniband/hw/mana/cq.c         |  80 ++++
 drivers/infiniband/hw/mana/device.c     | 129 ++++++
 drivers/infiniband/hw/mana/main.c       | 555 ++++++++++++++++++++++++
 drivers/infiniband/hw/mana/mana_ib.h    | 165 +++++++
 drivers/infiniband/hw/mana/mr.c         | 133 ++++++
 drivers/infiniband/hw/mana/qp.c         | 501 +++++++++++++++++++++
 drivers/infiniband/hw/mana/wq.c         | 114 +++++
 include/net/mana/mana.h                 |   3 +
 include/uapi/rdma/ib_user_ioctl_verbs.h |   1 +
 include/uapi/rdma/mana-abi.h            |  66 +++
 15 files changed, 1763 insertions(+)
 create mode 100644 drivers/infiniband/hw/mana/Kconfig
 create mode 100644 drivers/infiniband/hw/mana/Makefile
 create mode 100644 drivers/infiniband/hw/mana/cq.c
 create mode 100644 drivers/infiniband/hw/mana/device.c
 create mode 100644 drivers/infiniband/hw/mana/main.c
 create mode 100644 drivers/infiniband/hw/mana/mana_ib.h
 create mode 100644 drivers/infiniband/hw/mana/mr.c
 create mode 100644 drivers/infiniband/hw/mana/qp.c
 create mode 100644 drivers/infiniband/hw/mana/wq.c
 create mode 100644 include/uapi/rdma/mana-abi.h
MAINTAINERS +3 -0
index 8b9a50756c7e..7bcc19e27f97 100644
@@ -9426,6 +9426,7 @@ M:	Haiyang Zhang <[email protected]>
 M:	Stephen Hemminger <[email protected]>
 M:	Wei Liu <[email protected]>
 M:	Dexuan Cui <[email protected]>
+M:	Long Li <[email protected]>
 L:	[email protected]
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git
@@ -9444,6 +9445,7 @@ F:	arch/x86/kernel/cpu/mshyperv.c
 F:	drivers/clocksource/hyperv_timer.c
 F:	drivers/hid/hid-hyperv.c
 F:	drivers/hv/
+F:	drivers/infiniband/hw/mana/
 F:	drivers/input/serio/hyperv-keyboard.c
 F:	drivers/iommu/hyperv-iommu.c
 F:	drivers/net/ethernet/microsoft/
@@ -9459,6 +9461,7 @@ F:	include/clocksource/hyperv_timer.h
 F:	include/linux/hyperv.h
 F:	include/net/mana
 F:	include/uapi/linux/hyperv.h
+F:	include/uapi/rdma/mana-abi.h
 F:	net/vmw_vsock/hyperv_transport.c
 F:	tools/hv/
 
drivers/infiniband/Kconfig +1 -0
index aa36ac618e72..ccc874478f0b 100644
@@ -85,6 +85,7 @@ source "drivers/infiniband/hw/erdma/Kconfig"
 source "drivers/infiniband/hw/hfi1/Kconfig"
 source "drivers/infiniband/hw/hns/Kconfig"
 source "drivers/infiniband/hw/irdma/Kconfig"
+source "drivers/infiniband/hw/mana/Kconfig"
 source "drivers/infiniband/hw/mlx4/Kconfig"
 source "drivers/infiniband/hw/mlx5/Kconfig"
 source "drivers/infiniband/hw/mthca/Kconfig"
drivers/infiniband/hw/Makefile +1 -0
index 6b3a88046125..1211f4317a9f 100644
@@ -4,6 +4,7 @@ obj-$(CONFIG_INFINIBAND_QIB)		+= qib/
 obj-$(CONFIG_INFINIBAND_CXGB4)		+= cxgb4/
 obj-$(CONFIG_INFINIBAND_EFA)		+= efa/
 obj-$(CONFIG_INFINIBAND_IRDMA)		+= irdma/
+obj-$(CONFIG_MANA_INFINIBAND)		+= mana/
 obj-$(CONFIG_MLX4_INFINIBAND)		+= mlx4/
 obj-$(CONFIG_MLX5_INFINIBAND)		+= mlx5/
 obj-$(CONFIG_INFINIBAND_OCRDMA)		+= ocrdma/
drivers/infiniband/hw/mana/Kconfig new file +7 -0
new file mode 100644
index 000000000000..b3ff03a23257
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MANA_INFINIBAND
+	tristate "Microsoft Azure Network Adapter support"
+	depends on NETDEVICES && ETHERNET && PCI && MICROSOFT_MANA
+	help
+	  This driver provides low-level RDMA support for
+	  Microsoft Azure Network Adapter (MANA).
drivers/infiniband/hw/mana/Makefile new file +4 -0
new file mode 100644
index 000000000000..88655fe5e398
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_MANA_INFINIBAND) += mana_ib.o
+
+mana_ib-y := device.o main.o wq.o qp.o cq.o mr.o
drivers/infiniband/hw/mana/cq.c new file +80 -0

80 lines not on this page · raw message

drivers/infiniband/hw/mana/device.c new file +129 -0

129 lines not on this page · raw message

drivers/infiniband/hw/mana/main.c new file +555 -0

555 lines not on this page · raw message

drivers/infiniband/hw/mana/mana_ib.h new file +165 -0

165 lines not on this page · raw message

drivers/infiniband/hw/mana/mr.c new file +133 -0

133 lines not on this page · raw message

drivers/infiniband/hw/mana/qp.c new file +501 -0

501 lines not on this page · raw message

drivers/infiniband/hw/mana/wq.c new file +114 -0

114 lines not on this page · raw message

include/net/mana/mana.h +3 -0
index 713a8f8cca9a..20212ffeefb9 100644
@@ -412,6 +412,9 @@ int mana_bpf(struct net_device *ndev, struct netdev_bpf *bpf);
 
 extern const struct ethtool_ops mana_ethtool_ops;
 
+/* A CQ can be created not associated with any EQ */
+#define GDMA_CQ_NO_EQ  0xffff
+
 struct mana_obj_spec {
 	u32 queue_index;
 	u64 gdma_region;
include/uapi/rdma/ib_user_ioctl_verbs.h +1 -0
index 7dd56210226f..e0c25537fd2e 100644
@@ -251,6 +251,7 @@ enum rdma_driver_id {
 	RDMA_DRIVER_EFA,
 	RDMA_DRIVER_SIW,
 	RDMA_DRIVER_ERDMA,
+	RDMA_DRIVER_MANA,
 };
 
 enum ib_uverbs_gid_type {
include/uapi/rdma/mana-abi.h new file +66 -0

66 lines not on this page · raw message

Signature · 1 line
2.17.1
#13 lore raw

Re: [Patch v6 12/12] RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

Quoted 21 lines · On Tue, Sep 20, 2022 at 06:22:32PM -0700, [email protected] wrote:
MAINTAINERS +2 -0
index 8b9a50756c7e..7bcc19e27f97 100644
@@ -9426,6 +9426,7 @@ M:	Haiyang Zhang <[email protected]>
 M:	Stephen Hemminger <[email protected]>
 M:	Wei Liu <[email protected]>
 M:	Dexuan Cui <[email protected]>
+M:	Long Li <[email protected]>
 L:	[email protected]
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git
@@ -9444,6 +9445,7 @@ F:	arch/x86/kernel/cpu/mshyperv.c
 F:	drivers/clocksource/hyperv_timer.c
 F:	drivers/hid/hid-hyperv.c
 F:	drivers/hv/
+F:	drivers/infiniband/hw/mana/
 F:	drivers/input/serio/hyperv-keyboard.c
 F:	drivers/iommu/hyperv-iommu.c
 F:	drivers/net/ethernet/microsoft/

MAINTAINERS F: include/clocksource/hyperv_timer.h · line 9466

Quoted 6 lines
MAINTAINERS +1 -0
@@ -9459,6 +9461,7 @@ F:	include/clocksource/hyperv_timer.h
 F:	include/linux/hyperv.h
 F:	include/net/mana
 F:	include/uapi/linux/hyperv.h
+F:	include/uapi/rdma/mana-abi.h
 F:	net/vmw_vsock/hyperv_transport.c
 F:	tools/hv/

This is not the proper way to write a maintainers entry, a driver should be stand-alone and have L: entries for the subsystem mailing list, not be bundled like this. If you do this patches will not go to the correct lists and will not be applied.

Follow the example of every other rdma driver please.

Jason

#14 lore raw

RE: [Patch v6 12/12] RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

Quoted 37 lines

Subject: Re: [Patch v6 12/12] RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

Quoted 21 lines · On Tue, Sep 20, 2022 at 06:22:32PM -0700, [email protected] wrote:
MAINTAINERS index renamed from MAINTAINERS +0 -0

8b9a50756c7e..7bcc19e27f97 100644

MAINTAINERS +2 -0
@@ -9426,6 +9426,7 @@ M:	Haiyang Zhang <[email protected]>
 M:	Stephen Hemminger <[email protected]>
 M:	Wei Liu <[email protected]>
 M:	Dexuan Cui <[email protected]>
+M:	Long Li <[email protected]>
 L:	[email protected]
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git
@@ -9444,6 +9445,7 @@ F:	arch/x86/kernel/cpu/mshyperv.c
 F:	drivers/clocksource/hyperv_timer.c
 F:	drivers/hid/hid-hyperv.c
 F:	drivers/hv/
+F:	drivers/infiniband/hw/mana/
 F:	drivers/input/serio/hyperv-keyboard.c
 F:	drivers/iommu/hyperv-iommu.c
 F:	drivers/net/ethernet/microsoft/

MAINTAINERS F: include/clocksource/hyperv_timer.h · line 9466

Quoted 6 lines
MAINTAINERS +1 -0
@@ -9459,6 +9461,7 @@ F:	include/clocksource/hyperv_timer.h
 F:	include/linux/hyperv.h
 F:	include/net/mana
 F:	include/uapi/linux/hyperv.h
+F:	include/uapi/rdma/mana-abi.h
 F:	net/vmw_vsock/hyperv_transport.c
 F:	tools/hv/

This is not the proper way to write a maintainers entry, a driver should be stand-alone and have L: entries for the subsystem mailing list, not be bundled like this. If you do this patches will not go to the correct lists and will not be applied.

Quoted 3 lines

Follow the example of every other rdma driver please.

Jason

Will fix this.

Thanks,
Long

#15 lore raw

Re: [Patch v6 12/12] RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

In reply to [email protected]

drivers/infiniband/hw/mana/cq.c line 17

Quoted 10 lines · On Tue, Sep 20, 2022 at 06:22:32PM -0700, [email protected] wrote:
drivers/infiniband/hw/mana/cq.c new file +10 -0
+int mana_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
+		      struct ib_udata *udata)
+{
+	struct mana_ib_cq *cq = container_of(ibcq, struct mana_ib_cq, ibcq);
+	struct ib_device *ibdev = ibcq->device;
+	struct mana_ib_create_cq ucmd = {};
+	struct mana_ib_dev *mdev;
+	int err;
+
+	mdev = container_of(ibdev, struct mana_ib_dev, ib_dev);

Stylistically these container_of's are usually in the definitions section, at least pick a form and stick to it consistently.

Quoted 22 lines
drivers/infiniband/hw/mana/cq.c new file +21 -0
+	if (udata->inlen < sizeof(ucmd))
+		return -EINVAL;
+
+	err = ib_copy_from_udata(&ucmd, udata, min(sizeof(ucmd), udata->inlen));
+	if (err) {
+		ibdev_dbg(ibdev,
+			  "Failed to copy from udata for create cq, %d\n", err);
 
+		return -EFAULT;
+	}
+
+	if (attr->cqe > MAX_SEND_BUFFERS_PER_QUEUE) {
+		ibdev_dbg(ibdev, "CQE %d exceeding limit\n", attr->cqe);
+		return -EINVAL;
+	}
+
+	cq->cqe = attr->cqe;
+	cq->umem = ib_umem_get(ibdev, ucmd.buf_addr, cq->cqe * COMP_ENTRY_SIZE,
+			       IB_ACCESS_LOCAL_WRITE);
+	if (IS_ERR(cq->umem)) {
+		err = PTR_ERR(cq->umem);
+		ibdev_dbg(ibdev, "Failed to get umem for create cq, err %d\n",

drivers/infiniband/hw/mana/cq.c line 49

Quoted 10 lines
drivers/infiniband/hw/mana/cq.c new file +10 -0
+			  err);
+		return err;
+	}
+
+	err = mana_ib_gd_create_dma_region(mdev, cq->umem, &cq->gdma_region,
+					   PAGE_SIZE);
+	if (err) {
+		ibdev_err(ibdev,
+			  "Failed to create dma region for create cq, %d\n",
+			  err);

Prints on userspace paths are not allowed, this should be dbg. There are many other cases like this, please fix them all. This driver may have too many dbg prints too, not every failure if should have a print :(

drivers/infiniband/hw/mana/cq.c line 59

Quoted 7 lines
drivers/infiniband/hw/mana/cq.c new file +7 -0
+	ibdev_dbg(ibdev,
+		  "mana_ib_gd_create_dma_region ret %d gdma_region 0x%llx\n",
+		  err, cq->gdma_region);
+
+	/* The CQ ID is not known at this time
+	 * The ID is generated at create_qp
+	 */

Wrong comment style, rdma uses the leading empty blank line for some reason

/*
* The CQ ID is not known at this time. The ID is generated at create_qp. */

Quoted 26 lines
drivers/infiniband/hw/mana/device.c new file +26 -0
+static void mana_ib_remove(struct auxiliary_device *adev)
+{
+	struct mana_ib_dev *dev = dev_get_drvdata(&adev->dev);
+
+	ib_unregister_device(&dev->ib_dev);
+	ib_dealloc_device(&dev->ib_dev);
+}
+
+static const struct auxiliary_device_id mana_id_table[] = {
+	{
+		.name = "mana.rdma",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(auxiliary, mana_id_table);
+
+static struct auxiliary_driver mana_driver = {
+	.name = "rdma",
+	.probe = mana_ib_probe,
+	.remove = mana_ib_remove,
+	.id_table = mana_id_table,
+};
+
+static int __init mana_ib_init(void)
+{

drivers/infiniband/hw/mana/device.c line 127

Quoted 10 lines
drivers/infiniband/hw/mana/device.c new file +10 -0
+	auxiliary_driver_register(&mana_driver);
+
+	return 0;
+}
+
+static void __exit mana_ib_cleanup(void)
+{
+	auxiliary_driver_unregister(&mana_driver);
+}
+

All this is just module_auxiliary_driver()

drivers/infiniband/hw/mana/main.c line 50

Quoted 7 lines
drivers/infiniband/hw/mana/main.c new file +7 -0
+	mutex_lock(&pd->vport_mutex);
+
+	pd->vport_use_count++;
+	if (pd->vport_use_count > 1) {
+		ibdev_dbg(&dev->ib_dev,
+			  "Skip as this PD is already configured vport\n");
+		mutex_unlock(&pd->vport_mutex);

This leaves vport_use_count elevated.

drivers/infiniband/hw/mana/main.c line 105

Quoted 9 lines
drivers/infiniband/hw/mana/main.c new file +9 -0
+		return 0;
+int mana_ib_dealloc_pd(struct ib_pd *ibpd, struct ib_udata *udata)
+{
+	struct mana_ib_pd *pd = container_of(ibpd, struct mana_ib_pd, ibpd);
+	struct ib_device *ibdev = ibpd->device;
+	struct mana_ib_dev *dev;
+
+	dev = container_of(ibdev, struct mana_ib_dev, ib_dev);
+	return mana_ib_gd_destroy_pd(dev, pd->pd_handle);

This is the only place that calls mana_ib_gd_destroy_pd(), don't have a spaghetti of functions calling single other functions like this, just inline it.

Also it shouldn't have been non-static, please check everything that everything non-static actually has an out-of-file user.

Quoted 5 lines
drivers/infiniband/hw/mana/main.c new file +5 -0
+void mana_ib_dealloc_ucontext(struct ib_ucontext *ibcontext)
+{
+	struct mana_ib_ucontext *mana_ucontext =
+		container_of(ibcontext, struct mana_ib_ucontext, ibucontext);
+	struct ib_device *ibdev = ibcontext->device;

drivers/infiniband/hw/mana/main.c line 152

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+	struct mana_ib_dev *mdev;
+	struct gdma_context *gc;
+	int ret;
+
+	mdev = container_of(ibdev, struct mana_ib_dev, ib_dev);
+	gc = mdev->gdma_dev->gdma_context;
+
+	ret = mana_gd_destroy_doorbell_page(gc, mana_ucontext->doorbell);
+	if (ret)
+		ibdev_err(ibdev, "Failed to destroy doorbell page %d\n", ret);

This already printing on error

And again, why is this driver split up so strangely? mana_gd_destroy_doorbell_page() is an RDMA function, it is only called by the RDMA code, why is it located under drivers/net/ethernet?

I do not want an RDMA driver in drivers/net/ethernet.

Quoted 22 lines
drivers/infiniband/hw/mana/main.c new file +22 -0
+}
+
+int mana_ib_gd_create_dma_region(struct mana_ib_dev *dev, struct ib_umem *umem,
+				 mana_handle_t *gdma_region, u64 page_sz)
+{
+	size_t num_pages_total = ib_umem_num_dma_blocks(umem, page_sz);
+	struct gdma_dma_region_add_pages_req *add_req = NULL;
+	struct gdma_create_dma_region_resp create_resp = {};
+	struct gdma_create_dma_region_req *create_req;
+	size_t num_pages_cur, num_pages_to_handle;
+	unsigned int create_req_msg_size;
+	struct hw_channel_context *hwc;
+	struct ib_block_iter biter;
+	size_t max_pgs_create_cmd;
+	struct gdma_context *gc;
+	struct gdma_dev *mdev;
+	unsigned int i;
+	int err;
+
+	mdev = dev->gdma_dev;
+	gc = mdev->gdma_context;
+	hwc = gc->hwc.driver_data;

drivers/infiniband/hw/mana/main.c line 184

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+	max_pgs_create_cmd =
+		(hwc->max_req_msg_size - sizeof(*create_req)) / sizeof(u64);
+
+	num_pages_to_handle =
+		min_t(size_t, num_pages_total, max_pgs_create_cmd);
+	create_req_msg_size =
+		struct_size(create_req, page_addr_list, num_pages_to_handle);
+
+	create_req = kzalloc(create_req_msg_size, GFP_KERNEL);
+	if (!create_req)

Is this a multi-order allocation, I can't tell how big max_req_msg_size is?

This design seems to repeat the mistakes we made in mlx5, the low levels of the driver already has memory allocated - why not get a pointer to that memory here and directly fill the message buffer instead of all this allocation and memory copying?

Quoted 11 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+	ibdev_dbg(&dev->ib_dev,
+		  "size_dma_region %lu num_pages_total %lu, "
+		  "page_sz 0x%llx offset_in_page %u\n",
+		  umem->length, num_pages_total, page_sz,
+		  create_req->offset_in_page);
+
+	ibdev_dbg(&dev->ib_dev, "num_pages_to_handle %lu, gdma_page_type %u",
+		  num_pages_to_handle, create_req->gdma_page_type);
+
+	__rdma_umem_block_iter_start(&biter, umem, page_sz);
 

drivers/infiniband/hw/mana/main.c line 216

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+	for (i = 0; i < num_pages_to_handle; ++i) {
+		dma_addr_t cur_addr;
+
+		__rdma_block_iter_next(&biter);
+		cur_addr = rdma_block_iter_dma_address(&biter);
+
+		create_req->page_addr_list[i] = cur_addr;
+
+		ibdev_dbg(&dev->ib_dev, "page num %u cur_addr 0x%llx\n", i,
+			  cur_addr);

Please get rid of the worthless debugging code, actually test your driver with EBUG enabled and ensure it is usuable. Printing thousands of lines of garbage is not OK. Especially when what should have been a 1 line loop body is expended into a big block just to have a worthless debug statement.

Quoted 5 lines
drivers/infiniband/hw/mana/main.c new file +5 -0
+	if (num_pages_cur < num_pages_total) {
+		unsigned int add_req_msg_size;
+		size_t max_pgs_add_cmd =
+			(hwc->max_req_msg_size - sizeof(*add_req)) /
+			sizeof(u64);

drivers/infiniband/hw/mana/main.c line 253

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+
+		num_pages_to_handle =
+			min_t(size_t, num_pages_total - num_pages_cur,
+			      max_pgs_add_cmd);
+
+		/* Calculate the max num of pages that will be handled */
+		add_req_msg_size = struct_size(add_req, page_addr_list,
+					       num_pages_to_handle);
+
+		add_req = kmalloc(add_req_msg_size, GFP_KERNEL);

And allocating every loop iteration seems like overkill, why not just reuse the large buffer that create_req allocated?

Usually the way these loops are structured is to fill the array and then check for fullness, trigger an action to drain the array, and reset the indexes back to the start.

Quoted 13 lines
drivers/infiniband/hw/mana/main.c new file +13 -0
+int mana_ib_gd_create_pd(struct mana_ib_dev *dev, u64 *pd_handle, u32 *pd_id,
+			 enum gdma_pd_flags flags)
+{
+	struct gdma_dev *mdev = dev->gdma_dev;
+	struct gdma_create_pd_resp resp = {};
+	struct gdma_create_pd_req req = {};
+	struct gdma_context *gc;
+	int err;
+
+	gc = mdev->gdma_context;
+
+	mana_gd_init_req_hdr(&req.hdr, GDMA_CREATE_PD, sizeof(req),
+			     sizeof(resp));

drivers/infiniband/hw/mana/main.c line 354

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+
+	req.flags = flags;
+	err = mana_gd_send_request(gc, sizeof(req), &req, sizeof(resp), &resp);
+
+	if (err || resp.hdr.status) {
+		ibdev_err(&dev->ib_dev,
+			  "Failed to get pd_id err %d status %u\n", err,
+			  resp.hdr.status);
+		if (!err)
+			err = -EPROTO;

This pattern is repeated everywhere, you should fix mana_gd_send_request() to return EPROTO.

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+		return err;
+	}
+
+	*pd_handle = resp.pd_handle;
+	*pd_id = resp.pd_id;
+	ibdev_dbg(&dev->ib_dev, "pd_handle 0x%llx pd_id %d\n", *pd_handle,
+		  *pd_id);
+
+	return 0;
+}

drivers/infiniband/hw/mana/main.c line 375

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+
+int mana_ib_gd_destroy_pd(struct mana_ib_dev *dev, u64 pd_handle)
+{
+	struct gdma_dev *mdev = dev->gdma_dev;
+	struct gdma_destory_pd_resp resp = {};
+	struct gdma_destroy_pd_req req = {};
+	struct gdma_context *gc;
+	int err;
+
+	gc = mdev->gdma_context;

Why the local for a variable that is used once?

Quoted 7 lines
drivers/infiniband/hw/mana/main.c new file +7 -0
+int mana_ib_mmap(struct ib_ucontext *ibcontext, struct vm_area_struct *vma)
+{
+	struct mana_ib_ucontext *mana_ucontext =
+		container_of(ibcontext, struct mana_ib_ucontext, ibucontext);
+	struct ib_device *ibdev = ibcontext->device;
+	struct mana_ib_dev *mdev;
+	struct gdma_context *gc;

drivers/infiniband/hw/mana/main.c line 488

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+	phys_addr_t pfn;
+	pgprot_t prot;
+	int ret;
+
+	mdev = container_of(ibdev, struct mana_ib_dev, ib_dev);
+	gc = mdev->gdma_dev->gdma_context;
+
+	if (vma->vm_pgoff != 0) {
+		ibdev_err(ibdev, "Unexpected vm_pgoff %lu\n", vma->vm_pgoff);
+		return -EINVAL;

More user triggerable printing

drivers/infiniband/hw/mana/mr.c line 125

Quoted 12 lines
drivers/infiniband/hw/mana/mr.c new file +12 -0
+int mana_ib_dereg_mr(struct ib_mr *ibmr, struct ib_udata *udata)
+{
+	struct mana_ib_mr *mr = container_of(ibmr, struct mana_ib_mr, ibmr);
+	struct ib_device *ibdev = ibmr->device;
+	struct mana_ib_dev *dev;
+	int err;
+
+	dev = container_of(ibdev, struct mana_ib_dev, ib_dev);
+
+	err = mana_ib_gd_destroy_mr(dev, mr->mr_handle);
+	if (err)
+		return err;

mana_ib_gd_destroy_mr() is only ever called here, why is it in main.c?

Quoted 62 lines
drivers/infiniband/hw/mana/qp.c new file +62 -0
+static int mana_ib_create_qp_rss(struct ib_qp *ibqp, struct ib_pd *pd,
+				 struct ib_qp_init_attr *attr,
+				 struct ib_udata *udata)
+{
+	struct mana_ib_qp *qp = container_of(ibqp, struct mana_ib_qp, ibqp);
+	struct mana_ib_dev *mdev =
+		container_of(pd->device, struct mana_ib_dev, ib_dev);
+	struct ib_rwq_ind_table *ind_tbl = attr->rwq_ind_tbl;
+	struct mana_ib_create_qp_rss_resp resp = {};
+	struct mana_ib_create_qp_rss ucmd = {};
+	struct gdma_dev *gd = mdev->gdma_dev;
+	mana_handle_t *mana_ind_table;
+	struct mana_port_context *mpc;
+	struct mana_context *mc;
+	struct net_device *ndev;
+	struct mana_ib_cq *cq;
+	struct mana_ib_wq *wq;
+	struct ib_cq *ibcq;
+	struct ib_wq *ibwq;
+	int i = 0, ret;
+	u32 port;
+
+	mc = gd->driver_data;
+
+	if (udata->inlen < sizeof(ucmd))
+		return -EINVAL;
+
+	ret = ib_copy_from_udata(&ucmd, udata, min(sizeof(ucmd), udata->inlen));
+	if (ret) {
+		ibdev_dbg(&mdev->ib_dev,
+			  "Failed copy from udata for create rss-qp, err %d\n",
+			  ret);
+		return -EFAULT;
+	}
+
+	if (attr->cap.max_recv_wr > MAX_SEND_BUFFERS_PER_QUEUE) {
+		ibdev_dbg(&mdev->ib_dev,
+			  "Requested max_recv_wr %d exceeding limit.\n",
+			  attr->cap.max_recv_wr);
+		return -EINVAL;
+	}
+
+	if (attr->cap.max_recv_sge > MAX_RX_WQE_SGL_ENTRIES) {
+		ibdev_dbg(&mdev->ib_dev,
+			  "Requested max_recv_sge %d exceeding limit.\n",
+			  attr->cap.max_recv_sge);
+		return -EINVAL;
+	}
+
+	if (ucmd.rx_hash_function != MANA_IB_RX_HASH_FUNC_TOEPLITZ) {
+		ibdev_dbg(&mdev->ib_dev,
+			  "RX Hash function is not supported, %d\n",
+			  ucmd.rx_hash_function);
+		return -EINVAL;
+	}
+
+	/* IB ports start with 1, MANA start with 0 */
+	port = ucmd.port;
+	if (port < 1 || port > mc->num_ports) {
+		ibdev_dbg(&mdev->ib_dev, "Invalid port %u in creating qp\n",
+			  port);
+		return -EINVAL;

drivers/infiniband/hw/mana/qp.c line 162

Quoted 10 lines
drivers/infiniband/hw/mana/qp.c new file +10 -0
+	}
+	ndev = mc->ports[port - 1];
+	mpc = netdev_priv(ndev);
+
+	ibdev_dbg(&mdev->ib_dev, "rx_hash_function %d port %d\n",
+		  ucmd.rx_hash_function, port);
+
+	mana_ind_table = kzalloc(sizeof(mana_handle_t) *
+					 (1 << ind_tbl->log_ind_tbl_size),
+				 GFP_KERNEL);

Should be careful about maths overflow on this calculation.

Quoted 7 lines
drivers/infiniband/hw/mana/qp.c new file +7 -0
+	ibdev_dbg(&mdev->ib_dev, "ucmd sq_buf_addr 0x%llx port %u\n",
+		  ucmd.sq_buf_addr, ucmd.port);
+
+	umem = ib_umem_get(ibpd->device, ucmd.sq_buf_addr, ucmd.sq_buf_size,
+			   IB_ACCESS_LOCAL_WRITE);
+	if (IS_ERR(umem)) {
+		err = PTR_ERR(umem);

drivers/infiniband/hw/mana/qp.c line 328

Quoted 10 lines
drivers/infiniband/hw/mana/qp.c new file +10 -0
+		ibdev_dbg(&mdev->ib_dev,
+			  "Failed to get umem for create qp-raw, err %d\n",
+			  err);
+		goto err_free_vport;
+	}
+	qp->sq_umem = umem;
+
+	err = mana_ib_gd_create_dma_region(mdev, qp->sq_umem,
+					   &qp->sq_gdma_region, PAGE_SIZE);
+	if (err) {

All these cases that process a page list have to call ib_umem_find_best_XXX()!

It does important validation against hostile user input, including checking the critical iova.

You have missed that the user can request that an unaligned umem be created and this creates a starting offset from the first page that must be honored in HW, or there will be weird memory corruption. Since it looks like this HW doesn't support a starting page offset this should call ib_umem_find_best_pgsz() with a SZ_4K and a 0 iova. Also never use PAGE_SIZE to describe a HW limitation.

There is alot of repeated code here, it would do well to have a wrapper function consolidating this pattern.

Jason

#16 lore raw

RE: [Patch v6 12/12] RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

Quoted 6 lines

Subject: Re: [Patch v6 12/12] RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

Quoted 1 line · On Tue, Sep 20, 2022 at 06:22:32PM -0700, [email protected] wrote:

+int mana_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr

*attr,

Quoted 12 lines

drivers/infiniband/hw/mana/cq.c line 17

Quoted 9 lines
drivers/infiniband/hw/mana/cq.c new file +9 -0
+		      struct ib_udata *udata)
+{
+	struct mana_ib_cq *cq = container_of(ibcq, struct mana_ib_cq, ibcq);
+	struct ib_device *ibdev = ibcq->device;
+	struct mana_ib_create_cq ucmd = {};
+	struct mana_ib_dev *mdev;
+	int err;
+
+	mdev = container_of(ibdev, struct mana_ib_dev, ib_dev);

Stylistically these container_of's are usually in the definitions section, at least pick a form and stick to it consistently.

I will review all the other occurrences for consistency. I'm trying to use the "reverse Christmas tree" for definitions, so putting "mdev =" in a separate line.

Quoted 26 lines
Quoted 10 lines
drivers/infiniband/hw/mana/cq.c new file +4 -0
+	if (udata->inlen < sizeof(ucmd))
+		return -EINVAL;
+
+	err = ib_copy_from_udata(&ucmd, udata, min(sizeof(ucmd), udata-

inlen));

drivers/infiniband/hw/mana/cq.c new file +3 -0
+	if (err) {
+		ibdev_dbg(ibdev,
+			  "Failed to copy from udata for create cq, %d\n", err);
 

drivers/infiniband/hw/mana/cq.c

Quoted 10 lines
drivers/infiniband/hw/mana/cq.c new file +10 -0
+		return -EFAULT;
+	}
+
+	if (attr->cqe > MAX_SEND_BUFFERS_PER_QUEUE) {
+		ibdev_dbg(ibdev, "CQE %d exceeding limit\n", attr->cqe);
+		return -EINVAL;
+	}
+
+	cq->cqe = attr->cqe;
+	cq->umem = ib_umem_get(ibdev, ucmd.buf_addr, cq->cqe *

COMP_ENTRY_SIZE,

drivers/infiniband/hw/mana/cq.c

Quoted 4 lines
drivers/infiniband/hw/mana/cq.c new file +4 -0
+			       IB_ACCESS_LOCAL_WRITE);
+	if (IS_ERR(cq->umem)) {
+		err = PTR_ERR(cq->umem);
+		ibdev_dbg(ibdev, "Failed to get umem for create cq,

err %d\n",

Quoted 15 lines

drivers/infiniband/hw/mana/cq.c line 49

Quoted 11 lines
drivers/infiniband/hw/mana/cq.c new file +5 -0
+			  err);
+		return err;
+	}
+
+	err = mana_ib_gd_create_dma_region(mdev, cq->umem, &cq-

gdma_region,

drivers/infiniband/hw/mana/cq.c new file +5 -0
+					   PAGE_SIZE);
+	if (err) {
+		ibdev_err(ibdev,
+			  "Failed to create dma region for create cq, %d\n",
+			  err);

Prints on userspace paths are not allowed, this should be dbg. There are many other cases like this, please fix them all. This driver may have too many dbg prints too, not every failure if should have a print :(

Will fix those.

Quoted 13 lines

Review

Quoted 3 lines
(quoted diff) +2 -0
+	ibdev_dbg(ibdev,
+		  "mana_ib_gd_create_dma_region ret %d gdma_region

0x%llx\n",

drivers/infiniband/hw/mana/cq.c line 59

Quoted 5 lines
drivers/infiniband/hw/mana/cq.c new file +5 -0
+		  err, cq->gdma_region);
+
+	/* The CQ ID is not known at this time
+	 * The ID is generated at create_qp
+	 */

Wrong comment style, rdma uses the leading empty blank line for some reason

Quoted 3 lines

/*
* The CQ ID is not known at this time. The ID is generated at create_qp. */

Will fix all the comments.

Quoted 29 lines
Quoted 29 lines
drivers/infiniband/hw/mana/device.c new file +28 -0
+static void mana_ib_remove(struct auxiliary_device *adev) {
+	struct mana_ib_dev *dev = dev_get_drvdata(&adev->dev);
+
+	ib_unregister_device(&dev->ib_dev);
+	ib_dealloc_device(&dev->ib_dev);
+}
+
+static const struct auxiliary_device_id mana_id_table[] = {
+	{
+		.name = "mana.rdma",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(auxiliary, mana_id_table);
+
+static struct auxiliary_driver mana_driver = {
+	.name = "rdma",
+	.probe = mana_ib_probe,
+	.remove = mana_ib_remove,
+	.id_table = mana_id_table,
+};
+
+static int __init mana_ib_init(void)
+{
+	auxiliary_driver_register(&mana_driver);
+
+	return 0;
Quoted 8 lines

drivers/infiniband/hw/mana/device.c line 127

Quoted 6 lines
drivers/infiniband/hw/mana/device.c new file +6 -0
+}
+
+static void __exit mana_ib_cleanup(void) {
+	auxiliary_driver_unregister(&mana_driver);
+}
+

All this is just module_auxiliary_driver()

Will fix this.

Quoted 10 lines

drivers/infiniband/hw/mana/main.c line 50

Quoted 8 lines
drivers/infiniband/hw/mana/main.c new file +7 -0
+	mutex_lock(&pd->vport_mutex);
+
+	pd->vport_use_count++;
+	if (pd->vport_use_count > 1) {
+		ibdev_dbg(&dev->ib_dev,
+			  "Skip as this PD is already configured vport\n");
+		mutex_unlock(&pd->vport_mutex);

This leaves vport_use_count elevated.

This is intentional. The code will call mana_ib_uncfg_vport() (which decreases vport_use_count ) when destroying the QP.

Quoted 14 lines

Review

Quoted 4 lines
(quoted diff) +3 -0
+		return 0;
+int mana_ib_dealloc_pd(struct ib_pd *ibpd, struct ib_udata *udata) {
+	struct mana_ib_pd *pd = container_of(ibpd, struct mana_ib_pd,

ibpd);

drivers/infiniband/hw/mana/main.c line 105

Quoted 5 lines
drivers/infiniband/hw/mana/main.c new file +5 -0
+	struct ib_device *ibdev = ibpd->device;
+	struct mana_ib_dev *dev;
+
+	dev = container_of(ibdev, struct mana_ib_dev, ib_dev);
+	return mana_ib_gd_destroy_pd(dev, pd->pd_handle);

This is the only place that calls mana_ib_gd_destroy_pd(), don't have a spaghetti of functions calling single other functions like this, just inline it.

Quoted 2 lines

Also it shouldn't have been non-static, please check everything that everything non-static actually has an out-of-file user.

Will fix those.

Quoted 20 lines

Review

Quoted 4 lines
(quoted diff) +3 -0
+void mana_ib_dealloc_ucontext(struct ib_ucontext *ibcontext) {
+	struct mana_ib_ucontext *mana_ucontext =
+		container_of(ibcontext, struct mana_ib_ucontext,

ibucontext);

drivers/infiniband/hw/mana/main.c line 152

Quoted 12 lines
drivers/infiniband/hw/mana/main.c new file +9 -0
+	struct ib_device *ibdev = ibcontext->device;
+	struct mana_ib_dev *mdev;
+	struct gdma_context *gc;
+	int ret;
+
+	mdev = container_of(ibdev, struct mana_ib_dev, ib_dev);
+	gc = mdev->gdma_dev->gdma_context;
+
+	ret = mana_gd_destroy_doorbell_page(gc, mana_ucontext-

doorbell);

drivers/infiniband/hw/mana/main.c new file +2 -0
+	if (ret)
+		ibdev_err(ibdev, "Failed to destroy doorbell page %d\n", ret);

This already printing on error

Quoted 5 lines

And again, why is this driver split up so strangely? mana_gd_destroy_doorbell_page() is an RDMA function, it is only called by the RDMA code, why is it located under drivers/net/ethernet?

I do not want an RDMA driver in drivers/net/ethernet.

Will move this function (and mana_gd_allocate_doorbell_page) to the RDMA driver.

Quoted 41 lines

drivers/infiniband/hw/mana/cq.c

Quoted 5 lines
drivers/infiniband/hw/mana/cq.c new file +3 -0
+}
+
+int mana_ib_gd_create_dma_region(struct mana_ib_dev *dev, struct

ib_umem *umem,

drivers/infiniband/hw/mana/main.c line 156

Quoted 1 line
drivers/infiniband/hw/mana/main.c new file +1 -0
+				 mana_handle_t *gdma_region, u64 page_sz)

{

Review

Quoted 1 line
(quoted diff) +1 -0
+	size_t num_pages_total = ib_umem_num_dma_blocks(umem,

page_sz);

Quoted 8 lines
drivers/infiniband/hw/mana/main.c new file +8 -0
+	struct gdma_dma_region_add_pages_req *add_req = NULL;
+	struct gdma_create_dma_region_resp create_resp = {};
+	struct gdma_create_dma_region_req *create_req;
+	size_t num_pages_cur, num_pages_to_handle;
+	unsigned int create_req_msg_size;
+	struct hw_channel_context *hwc;
+	struct ib_block_iter biter;
+	size_t max_pgs_create_cmd;

drivers/infiniband/hw/mana/main.c

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+	struct gdma_context *gc;
+	struct gdma_dev *mdev;
+	unsigned int i;
+	int err;
+
+	mdev = dev->gdma_dev;
+	gc = mdev->gdma_context;
+	hwc = gc->hwc.driver_data;
+	max_pgs_create_cmd =
+		(hwc->max_req_msg_size - sizeof(*create_req)) /

sizeof(u64);

drivers/infiniband/hw/mana/main.c

Quoted 5 lines
drivers/infiniband/hw/mana/main.c new file +5 -0
+
+	num_pages_to_handle =
+		min_t(size_t, num_pages_total, max_pgs_create_cmd);
+	create_req_msg_size =
+		struct_size(create_req, page_addr_list,

num_pages_to_handle);

drivers/infiniband/hw/mana/main.c line 184

Quoted 3 lines
drivers/infiniband/hw/mana/main.c new file +3 -0
+
+	create_req = kzalloc(create_req_msg_size, GFP_KERNEL);
+	if (!create_req)

Is this a multi-order allocation, I can't tell how big max_req_msg_size is?

Quoted 4 lines

This design seems to repeat the mistakes we made in mlx5, the low levels of the driver already has memory allocated - why not get a pointer to that memory here and directly fill the message buffer instead of all this allocation and memory copying?

max_req_msg_size is 4k bytes (one page). I think this allocation is still necessary as we don't have a buffer for this request. But we should be able to reuse this buffer for subsequent commands (details below).

Quoted 22 lines

drivers/infiniband/hw/mana/main.c

Quoted 7 lines
drivers/infiniband/hw/mana/main.c new file +7 -0
+	ibdev_dbg(&dev->ib_dev,
+		  "size_dma_region %lu num_pages_total %lu, "
+		  "page_sz 0x%llx offset_in_page %u\n",
+		  umem->length, num_pages_total, page_sz,
+		  create_req->offset_in_page);
+
+	ibdev_dbg(&dev->ib_dev, "num_pages_to_handle %lu,

gdma_page_type %u",

drivers/infiniband/hw/mana/main.c

Quoted 13 lines
drivers/infiniband/hw/mana/main.c new file +12 -0
+		  num_pages_to_handle, create_req->gdma_page_type);
+
+	__rdma_umem_block_iter_start(&biter, umem, page_sz);
 
+	for (i = 0; i < num_pages_to_handle; ++i) {
+		dma_addr_t cur_addr;
+
+		__rdma_block_iter_next(&biter);
+		cur_addr = rdma_block_iter_dma_address(&biter);
+
+		create_req->page_addr_list[i] = cur_addr;
+
+		ibdev_dbg(&dev->ib_dev, "page num %u cur_addr 0x%llx\n",

i,

Quoted 7 lines

drivers/infiniband/hw/mana/main.c line 216

Quoted 1 line
drivers/infiniband/hw/mana/main.c new file +1 -0
+			  cur_addr);

Please get rid of the worthless debugging code, actually test your driver with EBUG enabled and ensure it is usuable. Printing thousands of lines of garbage is not OK. Especially when what should have been a
1 line loop body is expended into a big block just to have a worthless debug statement.

Will remove those debugging code.

Quoted 21 lines
Quoted 7 lines
drivers/infiniband/hw/mana/main.c new file +5 -0
+	if (num_pages_cur < num_pages_total) {
+		unsigned int add_req_msg_size;
+		size_t max_pgs_add_cmd =
+			(hwc->max_req_msg_size - sizeof(*add_req)) /
+			sizeof(u64);

drivers/infiniband/hw/mana/main.c line 253

Quoted 10 lines
drivers/infiniband/hw/mana/main.c new file +10 -0
+
+		num_pages_to_handle =
+			min_t(size_t, num_pages_total - num_pages_cur,
+			      max_pgs_add_cmd);
+
+		/* Calculate the max num of pages that will be handled */
+		add_req_msg_size = struct_size(add_req, page_addr_list,
+					       num_pages_to_handle);
+
+		add_req = kmalloc(add_req_msg_size, GFP_KERNEL);

And allocating every loop iteration seems like overkill, why not just reuse the large buffer that create_req allocated?

Quoted 3 lines

Usually the way these loops are structured is to fill the array and then check for fullness, trigger an action to drain the array, and reset the indexes back to the start.

I will reuse the command buffer allocated earlier as you suggested.

Quoted 21 lines
Quoted 2 lines

+int mana_ib_gd_create_pd(struct mana_ib_dev *dev, u64 *pd_handle,

u32 *pd_id,

Quoted 18 lines
drivers/infiniband/hw/mana/main.c new file +18 -0
+			 enum gdma_pd_flags flags)
+{
+	struct gdma_dev *mdev = dev->gdma_dev;
+	struct gdma_create_pd_resp resp = {};
+	struct gdma_create_pd_req req = {};
+	struct gdma_context *gc;
+	int err;
+
+	gc = mdev->gdma_context;
+
+	mana_gd_init_req_hdr(&req.hdr, GDMA_CREATE_PD, sizeof(req),
+			     sizeof(resp));
+
+	req.flags = flags;
+	err = mana_gd_send_request(gc, sizeof(req), &req, sizeof(resp),
+&resp);
+
+	if (err || resp.hdr.status) {
Quoted 8 lines

drivers/infiniband/hw/mana/main.c line 354

Quoted 5 lines
drivers/infiniband/hw/mana/main.c new file +5 -0
+		ibdev_err(&dev->ib_dev,
+			  "Failed to get pd_id err %d status %u\n", err,
+			  resp.hdr.status);
+		if (!err)
+			err = -EPROTO;

This pattern is repeated everywhere, you should fix mana_gd_send_request() to return EPROTO.

This pattern is also used all over in the ethernet driver. Since this patch series is for the RDMA driver, can we make a separate patch to refactor the code in mana_gd_send_request()? This can minimize the code changes to the ethernet driver in this patch series.

Quoted 8 lines

drivers/infiniband/hw/mana/main.c

Quoted 7 lines
drivers/infiniband/hw/mana/main.c new file +6 -0
+		return err;
+	}
+
+	*pd_handle = resp.pd_handle;
+	*pd_id = resp.pd_id;
+	ibdev_dbg(&dev->ib_dev, "pd_handle 0x%llx pd_id %d\n",

*pd_handle,

Quoted 15 lines

drivers/infiniband/hw/mana/main.c line 375

Quoted 13 lines
drivers/infiniband/hw/mana/main.c new file +13 -0
+		  *pd_id);
+
+	return 0;
+}
+
+int mana_ib_gd_destroy_pd(struct mana_ib_dev *dev, u64 pd_handle) {
+	struct gdma_dev *mdev = dev->gdma_dev;
+	struct gdma_destory_pd_resp resp = {};
+	struct gdma_destroy_pd_req req = {};
+	struct gdma_context *gc;
+	int err;
+
+	gc = mdev->gdma_context;

Why the local for a variable that is used once?

Will refactoring the code.

Quoted 26 lines

Review

Quoted 5 lines
(quoted diff) +4 -0
+int mana_ib_mmap(struct ib_ucontext *ibcontext, struct vm_area_struct
+*vma) {
+	struct mana_ib_ucontext *mana_ucontext =
+		container_of(ibcontext, struct mana_ib_ucontext,

ibucontext);

Quoted 13 lines
drivers/infiniband/hw/mana/main.c new file +12 -0
+	struct ib_device *ibdev = ibcontext->device;
+	struct mana_ib_dev *mdev;
+	struct gdma_context *gc;
+	phys_addr_t pfn;
+	pgprot_t prot;
+	int ret;
+
+	mdev = container_of(ibdev, struct mana_ib_dev, ib_dev);
+	gc = mdev->gdma_dev->gdma_context;
+
+	if (vma->vm_pgoff != 0) {
+		ibdev_err(ibdev, "Unexpected vm_pgoff %lu\n", vma-

vm_pgoff);

Review

Quoted 1 line
(quoted diff) +1 -0
+		return -EINVAL;

More user triggerable printing

Review

Quoted 2 lines
(quoted diff) +2 -0
+int mana_ib_dereg_mr(struct ib_mr *ibmr, struct ib_udata *udata) {
+	struct mana_ib_mr *mr = container_of(ibmr, struct mana_ib_mr,

ibmr);

Quoted 11 lines

drivers/infiniband/hw/mana/mr.c line 125

Quoted 9 lines
drivers/infiniband/hw/mana/mr.c new file +9 -0
+	struct ib_device *ibdev = ibmr->device;
+	struct mana_ib_dev *dev;
+	int err;
+
+	dev = container_of(ibdev, struct mana_ib_dev, ib_dev);
+
+	err = mana_ib_gd_destroy_mr(dev, mr->mr_handle);
+	if (err)
+		return err;

mana_ib_gd_destroy_mr() is only ever called here, why is it in main.c?

Will move it and mana_ib_gd_create_mr to mr.c

Quoted 65 lines

drivers/infiniband/hw/mana/qp.c

Quoted 6 lines
drivers/infiniband/hw/mana/qp.c new file +5 -0
+static int mana_ib_create_qp_rss(struct ib_qp *ibqp, struct ib_pd *pd,
+				 struct ib_qp_init_attr *attr,
+				 struct ib_udata *udata)
+{
+	struct mana_ib_qp *qp = container_of(ibqp, struct mana_ib_qp,

ibqp);

Quoted 36 lines
drivers/infiniband/hw/mana/qp.c new file +23 -0
+	struct mana_ib_dev *mdev =
+		container_of(pd->device, struct mana_ib_dev, ib_dev);
+	struct ib_rwq_ind_table *ind_tbl = attr->rwq_ind_tbl;
+	struct mana_ib_create_qp_rss_resp resp = {};
+	struct mana_ib_create_qp_rss ucmd = {};
+	struct gdma_dev *gd = mdev->gdma_dev;
+	mana_handle_t *mana_ind_table;
+	struct mana_port_context *mpc;
+	struct mana_context *mc;
+	struct net_device *ndev;
+	struct mana_ib_cq *cq;
+	struct mana_ib_wq *wq;
+	struct ib_cq *ibcq;
+	struct ib_wq *ibwq;
+	int i = 0, ret;
+	u32 port;
+
+	mc = gd->driver_data;
+
+	if (udata->inlen < sizeof(ucmd))
+		return -EINVAL;
+
+	ret = ib_copy_from_udata(&ucmd, udata, min(sizeof(ucmd), udata-

inlen));

drivers/infiniband/hw/mana/qp.c new file +12 -0
+	if (ret) {
+		ibdev_dbg(&mdev->ib_dev,
+			  "Failed copy from udata for create rss-qp, err %d\n",
+			  ret);
+		return -EFAULT;
+	}
+
+	if (attr->cap.max_recv_wr > MAX_SEND_BUFFERS_PER_QUEUE) {
+		ibdev_dbg(&mdev->ib_dev,
+			  "Requested max_recv_wr %d exceeding limit.\n",
+			  attr->cap.max_recv_wr);
+		return -EINVAL;

drivers/infiniband/hw/mana/qp.c

Quoted 10 lines
drivers/infiniband/hw/mana/qp.c new file +10 -0
+	}
+
+	if (attr->cap.max_recv_sge > MAX_RX_WQE_SGL_ENTRIES) {
+		ibdev_dbg(&mdev->ib_dev,
+			  "Requested max_recv_sge %d exceeding limit.\n",
+			  attr->cap.max_recv_sge);
+		return -EINVAL;
+	}
+
+	if (ucmd.rx_hash_function != MANA_IB_RX_HASH_FUNC_TOEPLITZ)

{

drivers/infiniband/hw/mana/qp.c

Quoted 10 lines
drivers/infiniband/hw/mana/qp.c new file +10 -0
+		ibdev_dbg(&mdev->ib_dev,
+			  "RX Hash function is not supported, %d\n",
+			  ucmd.rx_hash_function);
+		return -EINVAL;
+	}
+
+	/* IB ports start with 1, MANA start with 0 */
+	port = ucmd.port;
+	if (port < 1 || port > mc->num_ports) {
+		ibdev_dbg(&mdev->ib_dev, "Invalid port %u in creating

qp\n",

Quoted 14 lines

drivers/infiniband/hw/mana/qp.c line 162

Quoted 12 lines
drivers/infiniband/hw/mana/qp.c new file +12 -0
+			  port);
+		return -EINVAL;
+	}
+	ndev = mc->ports[port - 1];
+	mpc = netdev_priv(ndev);
+
+	ibdev_dbg(&mdev->ib_dev, "rx_hash_function %d port %d\n",
+		  ucmd.rx_hash_function, port);
+
+	mana_ind_table = kzalloc(sizeof(mana_handle_t) *
+					 (1 << ind_tbl->log_ind_tbl_size),
+				 GFP_KERNEL);

Should be careful about maths overflow on this calculation.

Will add a check.

Quoted 26 lines

drivers/infiniband/hw/mana/qp.c

Quoted 5 lines
drivers/infiniband/hw/mana/qp.c new file +4 -0
+	ibdev_dbg(&mdev->ib_dev, "ucmd sq_buf_addr 0x%llx port %u\n",
+		  ucmd.sq_buf_addr, ucmd.port);
+
+	umem = ib_umem_get(ibpd->device, ucmd.sq_buf_addr,

ucmd.sq_buf_size,

drivers/infiniband/hw/mana/qp.c line 328

Quoted 13 lines
drivers/infiniband/hw/mana/qp.c new file +13 -0
+			   IB_ACCESS_LOCAL_WRITE);
+	if (IS_ERR(umem)) {
+		err = PTR_ERR(umem);
+		ibdev_dbg(&mdev->ib_dev,
+			  "Failed to get umem for create qp-raw, err %d\n",
+			  err);
+		goto err_free_vport;
+	}
+	qp->sq_umem = umem;
+
+	err = mana_ib_gd_create_dma_region(mdev, qp->sq_umem,
+					   &qp->sq_gdma_region, PAGE_SIZE);
+	if (err) {

All these cases that process a page list have to call ib_umem_find_best_XXX()!

It does important validation against hostile user input, including checking the critical iova.

Quoted 6 lines

You have missed that the user can request that an unaligned umem be created and this creates a starting offset from the first page that must be honored in HW, or there will be weird memory corruption. Since it looks like this HW doesn't support a starting page offset this should call ib_umem_find_best_pgsz() with a SZ_4K and a 0 iova. Also never use PAGE_SIZE to describe a HW limitation.

Thank you, will fix this.

Quoted 3 lines

There is alot of repeated code here, it would do well to have a wrapper function consolidating this pattern.

Will factor the code.

Thanks,
Long

#17 lore raw
In reply to [email protected]
Quoted 20 lines · On Tue, Sep 20, 2022 at 06:22:20PM -0700, [email protected] wrote:

From: Long Li <[email protected]>

This patchset implements a RDMA driver for Microsoft Azure Network Adapter (MANA). In MANA, the RDMA device is modeled as an auxiliary device to the Ethernet device.

The first 11 patches modify the MANA Ethernet driver to support RDMA driver. The last patch implementes the RDMA driver.

The user-mode of the driver is being reviewed at:
https://github.com/linux-rdma/rdma-core/pull/1177

Ajay Sharma (3):
net: mana: Set the DMA device max segment size
net: mana: Define and process GDMA response code
GDMA_STATUS_MORE_ENTRIES
net: mana: Define data structures for protection domain and memory
registration

Quoted 10 lines

Long Li (9):
net: mana: Add support for auxiliary device
net: mana: Record the physical address for doorbell page region
net: mana: Handle vport sharing between devices
net: mana: Add functions for allocating doorbell page from GDMA
net: mana: Export Work Queue functions for use by RDMA driver
net: mana: Record port number in netdev
net: mana: Move header files to a common location
net: mana: Define max values for SGL entries RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

Still some basic checkpatchy stuff:

/tmp/tmpm2fsg47h/0012-RDMA-mana_ib-Add-a-driver-for-Microsoft-Azure-Network-Adapter.patch:412: WARNING: quoted string split across lines #412: FILE: drivers/infiniband/hw/mana/main.c:70:
+ "vport handle %llx pdid %x doorbell_id %x "
+ "tx_shortform_allowed %d tx_vp_offset %u\n",

/tmp/tmpm2fsg47h/0012-RDMA-mana_ib-Add-a-driver-for-Microsoft-Azure-Network-Adapter.patch:540: WARNING: quoted string split across lines #540: FILE: drivers/infiniband/hw/mana/main.c:198:
+ "size_dma_region %lu num_pages_total %lu, "
+ "page_sz 0x%llx offset_in_page %u\n",

And it thinks you should write more for the kconfig symbol, eg why would someone want to turn it on (hint, to use dpkd on some Azure instances)

/tmp/tmpm2fsg47h/0012-RDMA-mana_ib-Add-a-driver-for-Microsoft-Azure-Network-Adapter.patch:100: WARNING: please write a help paragraph that fully describes the config symbol #100: FILE: drivers/infiniband/hw/mana/Kconfig:2:
+config MANA_INFINIBAND
+ tristate "Microsoft Azure Network Adapter support"
+ depends on NETDEVICES && ETHERNET && PCI && MICROSOFT_MANA
+ help
+ This driver provides low-level RDMA support for
+ Microsoft Azure Network Adapter (MANA).

I'll put it in linux-next and you can fix the rest of the stuff bots will usually find.

Jason

#18 lore raw
Quoted 68 lines

Subject: Re: [Patch v6 00/12] Introduce Microsoft Azure Network Adapter (MANA) RDMA driver

Quoted 7 lines · On Tue, Sep 20, 2022 at 06:22:20PM -0700, [email protected] wrote:

From: Long Li <[email protected]>

This patchset implements a RDMA driver for Microsoft Azure Network Adapter (MANA). In MANA, the RDMA device is modeled as an auxiliary device to the Ethernet device.

The first 11 patches modify the MANA Ethernet driver to support RDMA

driver.

Quoted 4 lines

The last patch implementes the RDMA driver.

The user-mode of the driver is being reviewed at:

https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith

Quoted 1 line

ub.com%2Flinux-rdma%2Frdma-

core%2Fpull%2F1177&amp;data=05%7C01%7Clongl

Quoted 1 line

i%40microsoft.com%7C1d30ce9d49bc411b0fb808da9bede4bd%7C72f988bf86 f141a

Quoted 1 line

f91ab2d7cd011db47%7C1%7C0%7C637993743320198387%7CUnknown%7CT WFpbGZsb3d

Quoted 1 line

8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0% 3D%7C

Quoted 1 line

3000%7C%7C%7C&amp;sdata=4cT9PFnKqb2yHRLkKNrbVVMAGwO6Ig91eoQ zomlm6lY%3D

Quoted 10 lines

&amp;reserved=0

Ajay Sharma (3):
net: mana: Set the DMA device max segment size
net: mana: Define and process GDMA response code
GDMA_STATUS_MORE_ENTRIES
net: mana: Define data structures for protection domain and memory
registration

Quoted 10 lines

Long Li (9):
net: mana: Add support for auxiliary device
net: mana: Record the physical address for doorbell page region
net: mana: Handle vport sharing between devices
net: mana: Add functions for allocating doorbell page from GDMA
net: mana: Export Work Queue functions for use by RDMA driver
net: mana: Record port number in netdev
net: mana: Move header files to a common location
net: mana: Define max values for SGL entries RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

Still some basic checkpatchy stuff:

/tmp/tmpm2fsg47h/0012-RDMA-mana_ib-Add-a-driver-for-Microsoft- Azure-Network-Adapter.patch:412: WARNING: quoted string split across lines
#412: FILE: drivers/infiniband/hw/mana/main.c:70:

(quoted diff) +2 -0
+		  "vport handle %llx pdid %x doorbell_id %x "
+		  "tx_shortform_allowed %d tx_vp_offset %u\n",

/tmp/tmpm2fsg47h/0012-RDMA-mana_ib-Add-a-driver-for-Microsoft- Azure-Network-Adapter.patch:540: WARNING: quoted string split across lines
#540: FILE: drivers/infiniband/hw/mana/main.c:198:

(quoted diff) +2 -0
+		  "size_dma_region %lu num_pages_total %lu, "
+		  "page_sz 0x%llx offset_in_page %u\n",
Quoted 3 lines

And it thinks you should write more for the kconfig symbol, eg why would someone want to turn it on (hint, to use dpkd on some Azure instances)

Will fix those.

Quoted 13 lines

/tmp/tmpm2fsg47h/0012-RDMA-mana_ib-Add-a-driver-for-Microsoft- Azure-Network-Adapter.patch:100: WARNING: please write a help paragraph that fully describes the config symbol #100: FILE: drivers/infiniband/hw/mana/Kconfig:2:

(quoted diff) +3 -0
+config MANA_INFINIBAND
+	tristate "Microsoft Azure Network Adapter support"
+	depends on NETDEVICES && ETHERNET && PCI &&

MICROSOFT_MANA

(quoted diff) +3 -0
+	help
+	  This driver provides low-level RDMA support for
+	  Microsoft Azure Network Adapter (MANA).