i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
Subsystems (2)
PATCH v6 1/1 i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
Microchip pci1xxxx is an unmanaged PCIe3.1a Switch for Consumer, Industrial and Automotive applications. This switch has multiple downstream ports. In one of the Switch's Downstream port, there is a multifunction endpoint for peripherals which includes an I2C host controller. The I2C function in the endpoint operates at 100KHz, 400KHz and 1 MHz and has buffer depth of 128 bytes.
This patch provides the I2C controller driver for the I2C function of the switch.
---
V5 -> V6:
1. Added Signed-Off-by and Reviewed-by tags
---
V4 -> V5:
1. Removed autoprobe
2. Added quirk flag
---
V3 -> V4:
1. Removed typecasting for fields of min_t
2. Replaced TRUE with true
---
V2 -> V3:
1. Replaced SIMPLE_DEV_PM_OPS with DEFINE_SIMPLE_DEV_PM_OPS
2. Used devm_add_action API to avoid mixing devm and non-devm APIs
---
RFC -> V2:
1. Removed pci_free_irq_vectors API in code since pcim_enable_device is used
2. Added pci1xxxx_i2c_shutdown API in failure case of pci_alloc_irq_vectors and devm_request_irq
3. Used devm variant of i2c_add_adapter
4. Resolved name collision and fixed styling issues in comments
--- MAINTAINERS | 8 + drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-mchp-pci1xxxx.c | 1210 ++++++++++++++++++++++++ 4 files changed, 1229 insertions(+) create mode 100644 drivers/i2c/busses/i2c-mchp-pci1xxxx.c
MAINTAINERS +8 -0
@@ -13110,6 +13110,14 @@ S: Supported F: Documentation/devicetree/bindings/mtd/atmel-nand.txt F: drivers/mtd/nand/raw/atmel/* +MICROCHIP PCI1XXXX I2C DRIVER +M: Tharun Kumar P <[email protected]> +M: Kumaravel Thiagarajan <[email protected]> +M: Microchip Linux Driver Support <[email protected]> +L: [email protected] +S: Maintained +F: drivers/i2c/busses/i2c-mchp-pci1xxxx.c + MICROCHIP PWM DRIVER M: Claudiu Beznea <[email protected]> L: [email protected] (moderated for non-subscribers)
drivers/i2c/busses/Kconfig +10 -0
@@ -1244,6 +1244,16 @@ config I2C_PARPORT This support is also available as a module. If so, the module will be called i2c-parport. +config I2C_PCI1XXXX + tristate "PCI1XXXX I2C Host Adapter" + depends on PCI + help + If you say yes to this option, support will be included for + Microchip PCI1XXXX's I2C interface. + + This driver can also be built as a module. If so, the module will + be called i2c-mchp-pci1xxxx. + config I2C_ROBOTFUZZ_OSIF tristate "RobotFuzz Open Source InterFace USB adapter" depends on USB
drivers/i2c/busses/Makefile +1 -0
@@ -131,6 +131,7 @@ obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o obj-$(CONFIG_I2C_CP2615) += i2c-cp2615.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o +obj-$(CONFIG_I2C_PCI1XXXX) += i2c-mchp-pci1xxxx.o obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
drivers/i2c/busses/i2c-mchp-pci1xxxx.c new file +1210 -0
1,210 lines not on this page · raw message
Signature · 1 line
2.25.1
Wolfram Sang
AppliedQuoted 11 lines · Tharun Kumar P
Microchip pci1xxxx is an unmanaged PCIe3.1a Switch for Consumer, Industrial and Automotive applications. This switch has multiple downstream ports. In one of the Switch's Downstream port, there is a multifunction endpoint for peripherals which includes an I2C host controller. The I2C function in the endpoint operates at 100KHz, 400KHz and 1 MHz and has buffer depth of 128 bytes.
This patch provides the I2C controller driver for the I2C function of the switch.Signed-off-by Tharun Kumar P <[email protected]>Reviewed-by Andy Shevchenko <[email protected]>
Applied to for-next, thanks!