usb: ehci-fsl: Avoid -Wflex-array-member-not-at-end warning
Subsystems (2)
PATCH 1/1 usb: ehci-fsl: Avoid -Wflex-array-member-not-at-end warning
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice that struct ehci_hcd is a flexible structure --a structure that contains a flexible-array member.
Fix the following warning:
drivers/usb/host/ehci-fsl.c:414:25: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
--- drivers/usb/host/ehci-fsl.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/usb/host/ehci-fsl.c +3 -2
@@ -411,12 +411,13 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) }struct ehci_fsl { -struct ehci_hcd ehci; -#ifdef CONFIG_PM /* Saved USB PHY settings, need to restore after deep sleep. */ u32 usb_ctrl;#endif + +/* Must be last --ends in a flexible-array member. */ +struct ehci_hcd ehci; };#ifdef CONFIG_PM
Signature · 1 line
2.43.0
Alan Stern
maintainerQuoted 26 lines · Gustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice that
struct ehci_hcdis a flexible structure --a structure that contains a flexible-array member.Fix the following warning:
drivers/usb/host/ehci-fsl.c:414:25: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]Signed-off-by Gustavo A. R. Silva <[email protected]>--- drivers/usb/host/ehci-fsl.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)drivers/usb/host/ehci-fsl.c +0
-2@@ -411,12 +411,13 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) }struct ehci_fsl { -struct ehci_hcd ehci; -
drivers/usb/host/ehci-fsl.c static int ehci_fsl_setup(struct usb_hcd *hcd) · line 423
Quoted 10 lines
drivers/usb/host/ehci-fsl.c +3
-0#ifdef CONFIG_PM /* Saved USB PHY settings, need to restore after deep sleep. */ u32 usb_ctrl;#endif + +/* Must be last --ends in a flexible-array member. */ +struct ehci_hcd ehci; };#ifdef CONFIG_PM
While the sentiment is laudable, this mechanical change simply will not work. The driver was written incorrectly to begin with, and the change will probably break it.
I'll try to find time soon to create a proper fix. In short, the usb_ctrl field should have been stored in the .priv flex member of the ehci_hcd structure all along, and the .extra_priv_size member of ehci_fsl_overrides should have been set to the size of this u32 field, not the size of the entire ehci_fsl structure.
Alan Stern
Alan Stern
maintainerPATCH 1/1 usb: ehci-fsl: Fix use of private data to avoid -Wflex-array-member-not-at-end warning
In the course of fixing up the usages of flexible arrays, Gustavo submitted a patch updating the ehci-fsl driver. However, the patch was wrong because the driver was using the .priv member of the ehci_hcd structure incorrectly. The private data is not supposed to be a wrapper containing the ehci_hcd structure; it is supposed to be a sub-structure stored in the .priv member.
Fix the problem by replacing the ehci_fsl structure with ehci_fsl_priv, containing only the private data, along with a suitable conversion macro for accessing it. This removes the problem of having data follow a flexible array member.
---
drivers/usb/host/ehci-fsl.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-)
drivers/usb/host/ehci-fsl.c +8 -17
@@ -410,15 +410,13 @@ static int ehci_fsl_setup(struct usb_hcdreturn retval; } -struct ehci_fsl { -struct ehci_hcd ehci; - -#ifdef CONFIG_PM +struct ehci_fsl_priv {/* Saved USB PHY settings, need to restore after deep sleep. */ u32 usb_ctrl; -#endif }; +#define hcd_to_ehci_fsl_priv (h) ((struct ehci_fsl_priv *) hcd_to_ehci(h)->priv) +#ifdef CONFIG_PM #ifdef CONFIG_PPC_MPC512x
@@ -566,17 +564,10 @@ static inline int ehci_fsl_mpc512x_drv_r }#endif /* CONFIG_PPC_MPC512x */ -static struct ehci_fsl *hcd_to_ehci_fsl (struct usb_hcd *hcd) -{ -struct ehci_hcd *ehci =hcd_to_ehci (hcd); - - return container_of(ehci, struct ehci_fsl, ehci); -} -static int ehci_fsl_drv_suspend (struct device *dev) {struct usb_hcd *hcd =dev_get_drvdata (dev); -struct ehci_fsl *ehci_fsl =hcd_to_ehci_fsl (hcd); +struct ehci_fsl_priv *priv =hcd_to_ehci_fsl_priv (hcd);void __iomem *non_ehci = hcd->regs; if (of_device_is_compatible(dev->parent->of_node,
@@ -589,14 +580,14 @@ static int ehci_fsl_drv_suspend(struct dif (!fsl_deep_sleep ())return 0 ; - ehci_fsl->usb_ctrl =ioread32be (non_ehci +FSL_SOC_USB_CTRL ); + priv->usb_ctrl =ioread32be (non_ehci +FSL_SOC_USB_CTRL );return 0 ; }static int ehci_fsl_drv_resume (struct device *dev) {struct usb_hcd *hcd =dev_get_drvdata (dev); -struct ehci_fsl *ehci_fsl =hcd_to_ehci_fsl (hcd); +struct ehci_fsl_priv *priv =hcd_to_ehci_fsl_priv (hcd);struct ehci_hcd *ehci =hcd_to_ehci (hcd);void __iomem *non_ehci = hcd->regs;
@@ -612,7 +603,7 @@ static int ehci_fsl_drv_resume(struct deusb_root_hub_lost_power (hcd->self.root_hub);/* Restore USB PHY settings and enable the controller. */ -iowrite32be (ehci_fsl->usb_ctrl, non_ehci +FSL_SOC_USB_CTRL ); +iowrite32be (priv->usb_ctrl, non_ehci +FSL_SOC_USB_CTRL );ehci_reset (ehci);ehci_fsl_reinit (ehci);
@@ -671,7 +662,7 @@ static int ehci_start_port_reset(struct#endif /* CONFIG_USB_OTG */ static const struct ehci_driver_overrides ehci_fsl_overrides__initconst = { - .extra_priv_size =sizeof (struct ehci_fsl ), + .extra_priv_size =sizeof (struct ehci_fsl_priv ), .reset = ehci_fsl_setup, };
Re: [PATCH] usb: ehci-fsl: Fix use of private data to avoid -Wflex-array-member-not-at-end warning
Quoted 11 lines · Alan Stern
In the course of fixing up the usages of flexible arrays, Gustavo submitted a patch updating the ehci-fsl driver. However, the patch was wrong because the driver was using the .priv member of the
ehci_hcdstructure incorrectly. The private data is not supposed to be a wrapper containing theehci_hcdstructure; it is supposed to be a sub-structure stored in the .priv member.Fix the problem by replacing the
ehci_fslstructure withehci_fsl_priv, containing only the private data, along with a suitable conversion macro for accessing it. This removes the problem of having data follow a flexible array member.
Thanks for figuring out the right solution! :)
Quoted 4 lines
-Kees
Quoted 83 lines
---
drivers/usb/host/ehci-fsl.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-)Index:
usb-devel/drivers/usb/host/ehci-fsl.c
===================================================================drivers/usb/host/ehci-fsl.c +8
-17@@ -410,15 +410,13 @@ static int ehci_fsl_setup(struct usb_hcdreturn retval; } -struct ehci_fsl { -struct ehci_hcd ehci; - -#ifdef CONFIG_PM +struct ehci_fsl_priv {/* Saved USB PHY settings, need to restore after deep sleep. */ u32 usb_ctrl; -#endif }; +#define hcd_to_ehci_fsl_priv (h) ((struct ehci_fsl_priv *) hcd_to_ehci(h)->priv) +#ifdef CONFIG_PM #ifdef CONFIG_PPC_MPC512x@@ -566,17 +564,10 @@ static inline int ehci_fsl_mpc512x_drv_r }#endif /* CONFIG_PPC_MPC512x */ -static struct ehci_fsl *hcd_to_ehci_fsl (struct usb_hcd *hcd) -{ -struct ehci_hcd *ehci =hcd_to_ehci (hcd); - - return container_of(ehci, struct ehci_fsl, ehci); -} -static int ehci_fsl_drv_suspend (struct device *dev) {struct usb_hcd *hcd =dev_get_drvdata (dev); -struct ehci_fsl *ehci_fsl =hcd_to_ehci_fsl (hcd); +struct ehci_fsl_priv *priv =hcd_to_ehci_fsl_priv (hcd);void __iomem *non_ehci = hcd->regs; if (of_device_is_compatible(dev->parent->of_node,@@ -589,14 +580,14 @@ static int ehci_fsl_drv_suspend(struct dif (!fsl_deep_sleep ())return 0 ; - ehci_fsl->usb_ctrl =ioread32be (non_ehci +FSL_SOC_USB_CTRL ); + priv->usb_ctrl =ioread32be (non_ehci +FSL_SOC_USB_CTRL );return 0 ; }static int ehci_fsl_drv_resume (struct device *dev) {struct usb_hcd *hcd =dev_get_drvdata (dev); -struct ehci_fsl *ehci_fsl =hcd_to_ehci_fsl (hcd); +struct ehci_fsl_priv *priv =hcd_to_ehci_fsl_priv (hcd);struct ehci_hcd *ehci =hcd_to_ehci (hcd);void __iomem *non_ehci = hcd->regs;@@ -612,7 +603,7 @@ static int ehci_fsl_drv_resume(struct deusb_root_hub_lost_power (hcd->self.root_hub);/* Restore USB PHY settings and enable the controller. */ -iowrite32be (ehci_fsl->usb_ctrl, non_ehci +FSL_SOC_USB_CTRL ); +iowrite32be (priv->usb_ctrl, non_ehci +FSL_SOC_USB_CTRL );ehci_reset (ehci);ehci_fsl_reinit (ehci);@@ -671,7 +662,7 @@ static int ehci_start_port_reset(struct#endif /* CONFIG_USB_OTG */ static const struct ehci_driver_overrides ehci_fsl_overrides__initconst = { - .extra_priv_size =sizeof (struct ehci_fsl ), + .extra_priv_size =sizeof (struct ehci_fsl_priv ), .reset = ehci_fsl_setup, };
Signature · 1 line
Kees Cook