Skip to contentSkip to conversation

net: phylink: fix PCS without autoneg

PATCH Applied Russell King (Oracle) 5 participants 10 messages Jan 13, 2025 – Jan 15, 2025

Subsystems (23)
lore
Share & tools
lore

Russell King (Oracle)

author maintainer
#0 lore raw

v2 cover net: phylink: fix PCS without autoneg

Hi,

Eric Woudstra reported that a PCS attached using 2500base-X does not see link when phylink is using in-band mode, but autoneg is disabled, despite there being a valid 2500base-X signal being received. We have these settings:

act_link_an_mode = MLO_AN_INBAND pcs_neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED

Eric diagnosed it to phylink_decode_c37_word() setting state->link false because the full-duplex bit isn't set in the non-existent link partner advertisement word (which doesn't exist because in-band autoneg is disabled!)

The test in phylink_mii_c22_pcs_decode_state() is supposed to catch this state, but since we converted PCS to use neg_mode, testing the Autoneg in the local advertisement is no longer sufficient - we need to be looking at the neg_mode, which currently isn't provided.

We need to provide this via the .pcs_get_state() method, and this will require modifying all PCS implementations to add the extra argument to this method.

Patch 1 uses the PCS neg_mode in phylink_mac_pcs_get_state() to correct the now obsolute usage of the Autoneg bit in the advertisement.

Patch 2 passes neg_mode into the .pcs_get_state() method, and updates all users.

Patch 3 adds neg_mode as an argument to the various clause 22 state decoder functions in phylink, modifying drivers to pass the neg_mode through.

Patch 4 makes use of phylink_mii_c22_pcs_decode_state() rather than using the Autoneg bit in the advertising field.

Patch 5 may be required for Eric's case - it ensures that we report the correct state for interface types that we support only one set of modes for when autoneg is disabled.

Changes in v2:
- Add test for NULL pcs in patch 1

I haven't added Eric's t-b because I used a different fix in patch 1.

 drivers/net/dsa/b53/b53_serdes.c                   |  4 +-
 drivers/net/dsa/mt7530.c                           |  2 +-
 drivers/net/dsa/mv88e6xxx/pcs-6185.c               |  1 +
 drivers/net/dsa/mv88e6xxx/pcs-6352.c               |  1 +
 drivers/net/dsa/mv88e6xxx/pcs-639x.c               |  5 +-
 drivers/net/dsa/qca/qca8k-8xxx.c                   |  2 +-
 drivers/net/ethernet/cadence/macb_main.c           |  3 +-
 drivers/net/ethernet/freescale/fman/fman_dtsec.c   |  4 +-
 drivers/net/ethernet/marvell/mvneta.c              |  2 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c    |  2 +
 .../net/ethernet/marvell/prestera/prestera_main.c  |  1 +
 drivers/net/ethernet/meta/fbnic/fbnic_phylink.c    |  2 +-
 .../net/ethernet/microchip/lan966x/lan966x_main.h  |  2 +-
 .../ethernet/microchip/lan966x/lan966x_phylink.c   |  3 +-
 .../net/ethernet/microchip/lan966x/lan966x_port.c  |  4 +-
 .../net/ethernet/microchip/sparx5/sparx5_phylink.c |  2 +-
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c  |  3 +-
 drivers/net/pcs/pcs-lynx.c                         |  4 +-
 drivers/net/pcs/pcs-mtk-lynxi.c                    |  4 +-
 drivers/net/pcs/pcs-xpcs.c                         |  7 +--
 drivers/net/phy/phylink.c                          | 60 ++++++++++++++++------
 include/linux/phylink.h                            | 11 ++--
 22 files changed, 87 insertions(+), 42 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
#1 lore raw

PATCH v2 1/5 net: phylink: use pcs_neg_mode in phylink_mac_pcs_get_state()

As in-band AN no longer just depends on MLO_AN_INBAND + Autoneg bit, we need to take account of the pcs_neg_mode when deciding how to initialise the speed, duplex and pause state members before calling into the .pcs_neg_mode() method. Add this.

---
 drivers/net/phy/phylink.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
drivers/net/phy/phylink.c +16 -6
index 31754d5fd659..31f2d8a8ff19 100644
@@ -1492,12 +1492,24 @@ static int phylink_change_inband_advert(struct phylink *pl)
 static void phylink_mac_pcs_get_state(struct phylink *pl,
 				      struct phylink_link_state *state)
 {
+	struct phylink_pcs *pcs;
+	bool autoneg;
+
 	linkmode_copy(state->advertising, pl->link_config.advertising);
 	linkmode_zero(state->lp_advertising);
 	state->interface = pl->link_config.interface;
 	state->rate_matching = pl->link_config.rate_matching;
-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-			      state->advertising)) {
+	state->an_complete = 0;
+	state->link = 1;
+
+	pcs = pl->pcs;
+	if (!pcs || pcs->neg_mode)
+		autoneg = pl->pcs_neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED;
+	else
+		autoneg = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+					    state->advertising);
+
+	if (autoneg) {
 		state->speed = SPEED_UNKNOWN;
 		state->duplex = DUPLEX_UNKNOWN;
 		state->pause = MLO_PAUSE_NONE;
@@ -1506,11 +1518,9 @@ static void phylink_mac_pcs_get_state(struct phylink *pl,
 		state->duplex = pl->link_config.duplex;
 		state->pause = pl->link_config.pause;
 	}
-	state->an_complete = 0;
-	state->link = 1;
 
-	if (pl->pcs)
-		pl->pcs->ops->pcs_get_state(pl->pcs, state);
+	if (pcs)
+		pcs->ops->pcs_get_state(pcs, state);
 	else
 		state->link = 0;
 }
Signature · 1 line
2.30.2
#2 lore raw

PATCH v2 2/5 net: phylink: pass neg_mode into .pcs_get_state() method

In reply to Russell King (Oracle)

Pass the current neg_mode into the .pcs_get_state() method. Update all users of phylink PCS.

---
 drivers/net/dsa/b53/b53_serdes.c                         | 4 ++--
 drivers/net/dsa/mt7530.c                                 | 2 +-
 drivers/net/dsa/mv88e6xxx/pcs-6185.c                     | 1 +
 drivers/net/dsa/mv88e6xxx/pcs-6352.c                     | 1 +
 drivers/net/dsa/mv88e6xxx/pcs-639x.c                     | 5 ++++-
 drivers/net/dsa/qca/qca8k-8xxx.c                         | 2 +-
 drivers/net/ethernet/cadence/macb_main.c                 | 3 ++-
 drivers/net/ethernet/freescale/fman/fman_dtsec.c         | 2 +-
 drivers/net/ethernet/marvell/mvneta.c                    | 2 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c          | 2 ++
 drivers/net/ethernet/marvell/prestera/prestera_main.c    | 1 +
 drivers/net/ethernet/meta/fbnic/fbnic_phylink.c          | 2 +-
 drivers/net/ethernet/microchip/lan966x/lan966x_phylink.c | 1 +
 drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c   | 2 +-
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c        | 1 +
 drivers/net/pcs/pcs-lynx.c                               | 2 +-
 drivers/net/pcs/pcs-mtk-lynxi.c                          | 1 +
 drivers/net/pcs/pcs-xpcs.c                               | 2 +-
 drivers/net/phy/phylink.c                                | 2 +-
 include/linux/phylink.h                                  | 8 ++++++--
 20 files changed, 31 insertions(+), 15 deletions(-)
drivers/net/dsa/b53/b53_serdes.c +2 -2
index 3f8a491ce885..4730982b6840 100644
@@ -99,8 +99,8 @@ static void b53_serdes_an_restart(struct phylink_pcs *pcs)
 			 SERDES_MII_BLK, reg);
 }
 
-static void b53_serdes_get_state(struct phylink_pcs *pcs,
-				  struct phylink_link_state *state)
+static void b53_serdes_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
+				 struct phylink_link_state *state)
 {
 	struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev;
 	u8 lane = pcs_to_b53_pcs(pcs)->lane;
drivers/net/dsa/mt7530.c +1 -1
index d2d0f091e49e..1c83af805209 100644
@@ -2994,7 +2994,7 @@ static int mt753x_pcs_validate(struct phylink_pcs *pcs,
 	return 0;
 }
 
-static void mt7530_pcs_get_state(struct phylink_pcs *pcs,
+static void mt7530_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 				 struct phylink_link_state *state)
 {
 	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
drivers/net/dsa/mv88e6xxx/pcs-6185.c +1 -0
index 5a27d047a38e..75ed1fa500a5 100644
@@ -55,6 +55,7 @@ static irqreturn_t mv88e6185_pcs_handle_irq(int irq, void *dev_id)
 }
 
 static void mv88e6185_pcs_get_state(struct phylink_pcs *pcs,
+				    unsigned int neg_mode,
 				    struct phylink_link_state *state)
 {
 	struct mv88e6185_pcs *mpcs = pcs_to_mv88e6185_pcs(pcs);
drivers/net/dsa/mv88e6xxx/pcs-6352.c +1 -0
index 88f624b65470..143fe21d1834 100644
@@ -158,6 +158,7 @@ static void marvell_c22_pcs_disable(struct phylink_pcs *pcs)
 }
 
 static void marvell_c22_pcs_get_state(struct phylink_pcs *pcs,
+				      unsigned int neg_mode,
 				      struct phylink_link_state *state)
 {
 	struct marvell_c22_pcs *mpcs = pcs_to_marvell_c22_pcs(pcs);
drivers/net/dsa/mv88e6xxx/pcs-639x.c +4 -1
index d758a6c1b226..026b7bfb7ee5 100644
@@ -257,6 +257,7 @@ static int mv88e639x_sgmii_pcs_post_config(struct phylink_pcs *pcs,
 }
 
 static void mv88e639x_sgmii_pcs_get_state(struct phylink_pcs *pcs,
+					  unsigned int neg_mode,
 					  struct phylink_link_state *state)
 {
 	struct mv88e639x_pcs *mpcs = sgmii_pcs_to_mv88e639x_pcs(pcs);
@@ -395,6 +396,7 @@ static void mv88e639x_xg_pcs_disable(struct mv88e639x_pcs *mpcs)
 }
 
 static void mv88e639x_xg_pcs_get_state(struct phylink_pcs *pcs,
+				       unsigned int neg_mode,
 				       struct phylink_link_state *state)
 {
 	struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs);
@@ -889,6 +891,7 @@ static int mv88e6393x_xg_pcs_post_config(struct phylink_pcs *pcs,
 }
 
 static void mv88e6393x_xg_pcs_get_state(struct phylink_pcs *pcs,
+					unsigned int neg_mode,
 					struct phylink_link_state *state)
 {
 	struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs);
@@ -896,7 +899,7 @@ static void mv88e6393x_xg_pcs_get_state(struct phylink_pcs *pcs,
 	int err;
 
 	if (state->interface != PHY_INTERFACE_MODE_USXGMII)
-		return mv88e639x_xg_pcs_get_state(pcs, state);
+		return mv88e639x_xg_pcs_get_state(pcs, neg_mode, state);
 
 	state->link = false;
 
drivers/net/dsa/qca/qca8k-8xxx.c +1 -1
index 750fc76a6e11..e8cb4da15dbe 100644
@@ -1491,7 +1491,7 @@ static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs)
 	return container_of(pcs, struct qca8k_pcs, pcs);
 }
 
-static void qca8k_pcs_get_state(struct phylink_pcs *pcs,
+static void qca8k_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 				struct phylink_link_state *state)
 {
 	struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv;
drivers/net/ethernet/cadence/macb_main.c +2 -1
index 640f500f989d..48496209fb16 100644
@@ -568,6 +568,7 @@ static void macb_usx_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
 }
 
 static void macb_usx_pcs_get_state(struct phylink_pcs *pcs,
+				   unsigned int neg_mode,
 				   struct phylink_link_state *state)
 {
 	struct macb *bp = container_of(pcs, struct macb, phylink_usx_pcs);
@@ -598,7 +599,7 @@ static int macb_usx_pcs_config(struct phylink_pcs *pcs,
 	return 0;
 }
 
-static void macb_pcs_get_state(struct phylink_pcs *pcs,
+static void macb_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 			       struct phylink_link_state *state)
 {
 	state->link = 0;
drivers/net/ethernet/freescale/fman/fman_dtsec.c +1 -1
index 85617bb94959..c47108c820ea 100644
@@ -755,7 +755,7 @@ static struct fman_mac *pcs_to_dtsec(struct phylink_pcs *pcs)
 	return container_of(pcs, struct fman_mac, pcs);
 }
 
-static void dtsec_pcs_get_state(struct phylink_pcs *pcs,
+static void dtsec_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 				struct phylink_link_state *state)
 {
 	struct fman_mac *dtsec = pcs_to_dtsec(pcs);
drivers/net/ethernet/marvell/mvneta.c +1 -1
index fe6261b81540..9e79a60baebc 100644
@@ -3983,7 +3983,7 @@ static unsigned int mvneta_pcs_inband_caps(struct phylink_pcs *pcs,
 	return LINK_INBAND_DISABLE;
 }
 
-static void mvneta_pcs_get_state(struct phylink_pcs *pcs,
+static void mvneta_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 				 struct phylink_link_state *state)
 {
 	struct mvneta_port *pp = mvneta_pcs_to_port(pcs);
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +2 -0
index f85229a30844..d294580f4832 100644
@@ -6188,6 +6188,7 @@ static struct mvpp2_port *mvpp2_pcs_gmac_to_port(struct phylink_pcs *pcs)
 }
 
 static void mvpp2_xlg_pcs_get_state(struct phylink_pcs *pcs,
+				    unsigned int neg_mode,
 				    struct phylink_link_state *state)
 {
 	struct mvpp2_port *port = mvpp2_pcs_xlg_to_port(pcs);
@@ -6247,6 +6248,7 @@ static unsigned int mvpp2_gmac_pcs_inband_caps(struct phylink_pcs *pcs,
 }
 
 static void mvpp2_gmac_pcs_get_state(struct phylink_pcs *pcs,
+				     unsigned int neg_mode,
 				     struct phylink_link_state *state)
 {
 	struct mvpp2_port *port = mvpp2_pcs_gmac_to_port(pcs);
drivers/net/ethernet/marvell/prestera/prestera_main.c +1 -0
index 22ca6ee9665e..440a4c42b405 100644
@@ -280,6 +280,7 @@ prestera_mac_select_pcs(struct phylink_config *config,
 }
 
 static void prestera_pcs_get_state(struct phylink_pcs *pcs,
+				   unsigned int neg_mode,
 				   struct phylink_link_state *state)
 {
 	struct prestera_port *port = container_of(pcs, struct prestera_port,
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c +1 -1
index 1a5e1e719b30..bb11fc83367d 100644
@@ -15,7 +15,7 @@ fbnic_pcs_to_net(struct phylink_pcs *pcs)
 }
 
 static void
-fbnic_phylink_pcs_get_state(struct phylink_pcs *pcs,
+fbnic_phylink_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 			    struct phylink_link_state *state)
 {
 	struct fbnic_net *fbn = fbnic_pcs_to_net(pcs);
drivers/net/ethernet/microchip/lan966x/lan966x_phylink.c +1 -0
index 1d63903f9006..a761777259bf 100644
@@ -88,6 +88,7 @@ static struct lan966x_port *lan966x_pcs_to_port(struct phylink_pcs *pcs)
 }
 
 static void lan966x_pcs_get_state(struct phylink_pcs *pcs,
+				  unsigned int neg_mode,
 				  struct phylink_link_state *state)
 {
 	struct lan966x_port *port = lan966x_pcs_to_port(pcs);
drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c +1 -1
index 035d2f1bea0d..cfb4b2e17ace 100644
@@ -89,7 +89,7 @@ static struct sparx5_port *sparx5_pcs_to_port(struct phylink_pcs *pcs)
 	return container_of(pcs, struct sparx5_port, phylink_pcs);
 }
 
-static void sparx5_pcs_get_state(struct phylink_pcs *pcs,
+static void sparx5_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 				 struct phylink_link_state *state)
 {
 	struct sparx5_port *port = sparx5_pcs_to_port(pcs);
drivers/net/ethernet/xilinx/xilinx_axienet_main.c +1 -0
index 0f4b02fe6f85..f9e695d7cc4a 100644
@@ -2331,6 +2331,7 @@ static struct axienet_local *pcs_to_axienet_local(struct phylink_pcs *pcs)
 }
 
 static void axienet_pcs_get_state(struct phylink_pcs *pcs,
+				  unsigned int neg_mode,
 				  struct phylink_link_state *state)
 {
 	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
drivers/net/pcs/pcs-lynx.c +1 -1
index 6457190ec6e7..f359f62f69ad 100644
@@ -100,7 +100,7 @@ static void lynx_pcs_get_state_2500basex(struct mdio_device *pcs,
 	state->duplex = DUPLEX_FULL;
 }
 
-static void lynx_pcs_get_state(struct phylink_pcs *pcs,
+static void lynx_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 			       struct phylink_link_state *state)
 {
 	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
drivers/net/pcs/pcs-mtk-lynxi.c +1 -0
index 4fe0fb6d12a4..e1b6f332c3c2 100644
@@ -105,6 +105,7 @@ static unsigned int mtk_pcs_lynxi_inband_caps(struct phylink_pcs *pcs,
 }
 
 static void mtk_pcs_lynxi_get_state(struct phylink_pcs *pcs,
+				    unsigned int neg_mode,
 				    struct phylink_link_state *state)
 {
 	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
drivers/net/pcs/pcs-xpcs.c +1 -1
index c06b66f40022..4cd0c4fe6496 100644
@@ -1086,7 +1086,7 @@ static int xpcs_get_state_2500basex(struct dw_xpcs *xpcs,
 	return 0;
 }
 
-static void xpcs_get_state(struct phylink_pcs *pcs,
+static void xpcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 			   struct phylink_link_state *state)
 {
 	struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
drivers/net/phy/phylink.c +1 -1
index 31f2d8a8ff19..a8d443ee18be 100644
@@ -1520,7 +1520,7 @@ static void phylink_mac_pcs_get_state(struct phylink *pl,
 	}
 
 	if (pcs)
-		pcs->ops->pcs_get_state(pcs, state);
+		pcs->ops->pcs_get_state(pcs, pl->pcs_neg_mode, state);
 	else
 		state->link = 0;
 }
include/linux/phylink.h +6 -2
index 4b7a20620b49..0bbcb4898e93 100644
@@ -446,7 +446,7 @@ struct phylink_pcs_ops {
 			       phy_interface_t interface);
 	int (*pcs_post_config)(struct phylink_pcs *pcs,
 			       phy_interface_t interface);
-	void (*pcs_get_state)(struct phylink_pcs *pcs,
+	void (*pcs_get_state)(struct phylink_pcs *pcs, unsigned int neg_mode,
 			      struct phylink_link_state *state);
 	int (*pcs_config)(struct phylink_pcs *pcs, unsigned int neg_mode,
 			  phy_interface_t interface,
@@ -505,6 +505,7 @@ void pcs_disable(struct phylink_pcs *pcs);
 /**
  * pcs_get_state() - Read the current inband link state from the hardware
  * @pcs: a pointer to a &struct phylink_pcs.
+ * @neg_mode: link negotiation mode (PHYLINK_PCS_NEG_xxx)
  * @state: a pointer to a &struct phylink_link_state.
  *
  * Read the current inband link state from the MAC PCS, reporting the
@@ -513,8 +514,11 @@ void pcs_disable(struct phylink_pcs *pcs);
  * negotiation completion state in @state->an_complete, and link up state
  * in @state->link. If possible, @state->lp_advertising should also be
  * populated.
+ *
+ * Note that the @neg_mode parameter is always the PHYLINK_PCS_NEG_xxx
+ * state, not MLO_AN_xxx.
  */
-void pcs_get_state(struct phylink_pcs *pcs,
+void pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 		   struct phylink_link_state *state);
 
 /**
Signature · 1 line
2.30.2
#3 lore raw

PATCH v2 3/5 net: phylink: pass neg_mode into c22 state decoder

In reply to Russell King (Oracle)

Pass the current neg_mode into phylink_mii_c22_pcs_get_state() and phylink_mii_c22_pcs_decode_state(). Update all users of phylink PCS that use these functions.

---
 drivers/net/ethernet/freescale/fman/fman_dtsec.c         | 2 +-
 drivers/net/ethernet/microchip/lan966x/lan966x_main.h    | 2 +-
 drivers/net/ethernet/microchip/lan966x/lan966x_phylink.c | 2 +-
 drivers/net/ethernet/microchip/lan966x/lan966x_port.c    | 4 ++--
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c        | 2 +-
 drivers/net/pcs/pcs-lynx.c                               | 2 +-
 drivers/net/pcs/pcs-mtk-lynxi.c                          | 3 ++-
 drivers/net/pcs/pcs-xpcs.c                               | 5 +++--
 drivers/net/phy/phylink.c                                | 7 +++++--
 include/linux/phylink.h                                  | 3 ++-
 10 files changed, 19 insertions(+), 13 deletions(-)
drivers/net/ethernet/freescale/fman/fman_dtsec.c +1 -1
index c47108c820ea..b3e2a596ad2c 100644
@@ -760,7 +760,7 @@ static void dtsec_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 {
 	struct fman_mac *dtsec = pcs_to_dtsec(pcs);
 
-	phylink_mii_c22_pcs_get_state(dtsec->tbidev, state);
+	phylink_mii_c22_pcs_get_state(dtsec->tbidev, neg_mode, state);
 }
 
 static int dtsec_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
drivers/net/ethernet/microchip/lan966x/lan966x_main.h +1 -1
index 25cb2f61986f..1efa584e7107 100644
@@ -443,7 +443,7 @@ int lan966x_stats_init(struct lan966x *lan966x);
 
 void lan966x_port_config_down(struct lan966x_port *port);
 void lan966x_port_config_up(struct lan966x_port *port);
-void lan966x_port_status_get(struct lan966x_port *port,
+void lan966x_port_status_get(struct lan966x_port *port, unsigned int neg_mode,
 			     struct phylink_link_state *state);
 int lan966x_port_pcs_set(struct lan966x_port *port,
 			 struct lan966x_port_config *config);
drivers/net/ethernet/microchip/lan966x/lan966x_phylink.c +1 -1
index a761777259bf..75188b99e4e7 100644
@@ -93,7 +93,7 @@ static void lan966x_pcs_get_state(struct phylink_pcs *pcs,
 {
 	struct lan966x_port *port = lan966x_pcs_to_port(pcs);
 
-	lan966x_port_status_get(port, state);
+	lan966x_port_status_get(port, neg_mode, state);
 }
 
 static int lan966x_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
drivers/net/ethernet/microchip/lan966x/lan966x_port.c +2 -2
index fdfa4040d9ee..cf7de0267c32 100644
@@ -284,7 +284,7 @@ void lan966x_port_config_up(struct lan966x_port *port)
 	lan966x_port_link_up(port);
 }
 
-void lan966x_port_status_get(struct lan966x_port *port,
+void lan966x_port_status_get(struct lan966x_port *port, unsigned int neg_mode,
 			     struct phylink_link_state *state)
 {
 	struct lan966x *lan966x = port->lan966x;
@@ -314,7 +314,7 @@ void lan966x_port_status_get(struct lan966x_port *port,
 		bmsr |= BMSR_ANEGCOMPLETE;
 
 		lp_adv = DEV_PCS1G_ANEG_STATUS_LP_ADV_GET(val);
-		phylink_mii_c22_pcs_decode_state(state, bmsr, lp_adv);
+		phylink_mii_c22_pcs_decode_state(state, neg_mode, bmsr, lp_adv);
 	} else {
 		if (!state->link)
 			return;
drivers/net/ethernet/xilinx/xilinx_axienet_main.c +1 -1
index f9e695d7cc4a..3531646ef6ab 100644
@@ -2336,7 +2336,7 @@ static void axienet_pcs_get_state(struct phylink_pcs *pcs,
 {
 	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
 
-	phylink_mii_c22_pcs_get_state(pcs_phy, state);
+	phylink_mii_c22_pcs_get_state(pcs_phy, neg_mode, state);
 }
 
 static void axienet_pcs_an_restart(struct phylink_pcs *pcs)
drivers/net/pcs/pcs-lynx.c +1 -1
index f359f62f69ad..e46f588cae7d 100644
@@ -109,7 +109,7 @@ static void lynx_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
-		phylink_mii_c22_pcs_get_state(lynx->mdio, state);
+		phylink_mii_c22_pcs_get_state(lynx->mdio, neg_mode, state);
 		break;
 	case PHY_INTERFACE_MODE_2500BASEX:
 		lynx_pcs_get_state_2500basex(lynx->mdio, state);
drivers/net/pcs/pcs-mtk-lynxi.c +2 -1
index e1b6f332c3c2..7d6261dee534 100644
@@ -115,7 +115,8 @@ static void mtk_pcs_lynxi_get_state(struct phylink_pcs *pcs,
 	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &bm);
 	regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv);
 
-	phylink_mii_c22_pcs_decode_state(state, FIELD_GET(SGMII_BMSR, bm),
+	phylink_mii_c22_pcs_decode_state(state, neg_mode,
+					 FIELD_GET(SGMII_BMSR, bm),
 					 FIELD_GET(SGMII_LPA, adv));
 }
 
drivers/net/pcs/pcs-xpcs.c +3 -2
index 4cd0c4fe6496..1aef2afd3c73 100644
@@ -1030,6 +1030,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 }
 
 static int xpcs_get_state_c37_1000basex(struct dw_xpcs *xpcs,
+					unsigned int neg_mode,
 					struct phylink_link_state *state)
 {
 	int lpa, bmsr;
@@ -1058,7 +1059,7 @@ static int xpcs_get_state_c37_1000basex(struct dw_xpcs *xpcs,
 			}
 		}
 
-		phylink_mii_c22_pcs_decode_state(state, bmsr, lpa);
+		phylink_mii_c22_pcs_decode_state(state, neg_mode, bmsr, lpa);
 	}
 
 	return 0;
@@ -1114,7 +1115,7 @@ static void xpcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
 				"xpcs_get_state_c37_sgmii", ERR_PTR(ret));
 		break;
 	case DW_AN_C37_1000BASEX:
-		ret = xpcs_get_state_c37_1000basex(xpcs, state);
+		ret = xpcs_get_state_c37_1000basex(xpcs, neg_mode, state);
 		if (ret)
 			dev_err(&xpcs->mdiodev->dev, "%s returned %pe\n",
 				"xpcs_get_state_c37_1000basex", ERR_PTR(ret));
drivers/net/phy/phylink.c +5 -2
index a8d443ee18be..b29b7e73b5bd 100644
@@ -3860,6 +3860,7 @@ static void phylink_decode_usgmii_word(struct phylink_link_state *state,
 /**
  * phylink_mii_c22_pcs_decode_state() - Decode MAC PCS state from MII registers
  * @state: a pointer to a &struct phylink_link_state.
+ * @neg_mode: link negotiation mode (PHYLINK_PCS_NEG_xxx)
  * @bmsr: The value of the %MII_BMSR register
  * @lpa: The value of the %MII_LPA register
  *
@@ -3872,7 +3873,7 @@ static void phylink_decode_usgmii_word(struct phylink_link_state *state,
  * accessing @bmsr and @lpa cannot be done with MDIO directly.
  */
 void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state,
-				      u16 bmsr, u16 lpa)
+				      unsigned int neg_mode, u16 bmsr, u16 lpa)
 {
 	state->link = !!(bmsr & BMSR_LSTATUS);
 	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
@@ -3910,6 +3911,7 @@ EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_decode_state);
 /**
  * phylink_mii_c22_pcs_get_state() - read the MAC PCS state
  * @pcs: a pointer to a &struct mdio_device.
+ * @neg_mode: link negotiation mode (PHYLINK_PCS_NEG_xxx)
  * @state: a pointer to a &struct phylink_link_state.
  *
  * Helper for MAC PCS supporting the 802.3 clause 22 register set for
@@ -3922,6 +3924,7 @@ EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_decode_state);
  * structure.
  */
 void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
+				   unsigned int neg_mode,
 				   struct phylink_link_state *state)
 {
 	int bmsr, lpa;
@@ -3933,7 +3936,7 @@ void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
 		return;
 	}
 
-	phylink_mii_c22_pcs_decode_state(state, bmsr, lpa);
+	phylink_mii_c22_pcs_decode_state(state, neg_mode, bmsr, lpa);
 }
 EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_get_state);
 
include/linux/phylink.h +2 -1
index 0bbcb4898e93..f19b7108c840 100644
@@ -693,8 +693,9 @@ static inline int phylink_get_link_timer_ns(phy_interface_t interface)
 }
 
 void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state,
-				      u16 bmsr, u16 lpa);
+				      unsigned int neg_mode, u16 bmsr, u16 lpa);
 void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
+				   unsigned int neg_mode,
 				   struct phylink_link_state *state);
 int phylink_mii_c22_pcs_encode_advertisement(phy_interface_t interface,
 					     const unsigned long *advertising);
Signature · 1 line
2.30.2
#4 lore raw

PATCH v2 4/5 net: phylink: use neg_mode in phylink_mii_c22_pcs_decode_state()

In reply to Russell King (Oracle)

Rather than using the state of the Autoneg bit, which is unreliable with the new PCS neg mode support, use the passed neg_mode to decide whether to decode the link partner advertisement data.

---
 drivers/net/phy/phylink.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/net/phy/phylink.c +8 -4
index b29b7e73b5bd..b79f975bc164 100644
@@ -3877,11 +3877,15 @@ void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state,
 {
 	state->link = !!(bmsr & BMSR_LSTATUS);
 	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
-	/* If there is no link or autonegotiation is disabled, the LP advertisement
-	 * data is not meaningful, so don't go any further.
+
+	/* If the link is down, the advertisement data is undefined. */
+	if (!state->link)
+		return;
+
+	/* If in-band is disabled, then the advertisement data is not
+	 * meaningful.
 	 */
-	if (!state->link || !linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-					       state->advertising))
+	if (neg_mode != PHYLINK_PCS_NEG_INBAND_ENABLED)
 		return;
 
 	switch (state->interface) {
Signature · 1 line
2.30.2
#5 lore raw

PATCH v2 5/5 net: phylink: provide fixed state for 1000base-X and 2500base-X

In reply to Russell King (Oracle)

When decoding clause 22 state, if in-band is disabled and using either 1000base-X or 2500base-X, rather than reporting link-down, we know the speed, and we only support full duplex. Pause modes taken from XPCS.

This fixes a problem reported by Eric Woudstra.

---
 drivers/net/phy/phylink.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)
drivers/net/phy/phylink.c +19 -10
index b79f975bc164..ff0efb52189f 100644
@@ -3882,27 +3882,36 @@ void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state,
 	if (!state->link)
 		return;
 
-	/* If in-band is disabled, then the advertisement data is not
-	 * meaningful.
-	 */
-	if (neg_mode != PHYLINK_PCS_NEG_INBAND_ENABLED)
-		return;
-
 	switch (state->interface) {
 	case PHY_INTERFACE_MODE_1000BASEX:
-		phylink_decode_c37_word(state, lpa, SPEED_1000);
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+			phylink_decode_c37_word(state, lpa, SPEED_1000);
+		} else {
+			state->speed = SPEED_1000;
+			state->duplex = DUPLEX_FULL;
+			state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
+		}
 		break;
 
 	case PHY_INTERFACE_MODE_2500BASEX:
-		phylink_decode_c37_word(state, lpa, SPEED_2500);
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+			phylink_decode_c37_word(state, lpa, SPEED_2500);
+		} else {
+			state->speed = SPEED_2500;
+			state->duplex = DUPLEX_FULL;
+			state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
+		}
 		break;
 
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
-		phylink_decode_sgmii_word(state, lpa);
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
+			phylink_decode_sgmii_word(state, lpa);
 		break;
+
 	case PHY_INTERFACE_MODE_QUSGMII:
-		phylink_decode_usgmii_word(state, lpa);
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
+			phylink_decode_usgmii_word(state, lpa);
 		break;
 
 	default:
Signature · 1 line
2.30.2
maintainer
#6 lore raw

Re: [PATCH net-next v2 5/5] net: phylink: provide fixed state for 1000base-X and 2500base-X

Quoted 37 lines · Russell King (Oracle)

When decoding clause 22 state, if in-band is disabled and using either 1000base-X or 2500base-X, rather than reporting link-down, we know the speed, and we only support full duplex. Pause modes taken from XPCS.

This fixes a problem reported by Eric Woudstra.

---
 drivers/net/phy/phylink.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)
drivers/net/phy/phylink.c +7 -7
index b79f975bc164..ff0efb52189f 100644
@@ -3882,27 +3882,36 @@ void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state,
 	if (!state->link)
 		return;
 
-	/* If in-band is disabled, then the advertisement data is not
-	 * meaningful.
-	 */
-	if (neg_mode != PHYLINK_PCS_NEG_INBAND_ENABLED)
-		return;
-
 	switch (state->interface) {
 	case PHY_INTERFACE_MODE_1000BASEX:
-		phylink_decode_c37_word(state, lpa, SPEED_1000);
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+			phylink_decode_c37_word(state, lpa, SPEED_1000);
+		} else {
+			state->speed = SPEED_1000;
+			state->duplex = DUPLEX_FULL;
+			state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
+		}
 		break;
 

drivers/net/phy/phylink.c void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state, · line 3904

Quoted 10 lines
drivers/net/phy/phylink.c +7 -1
 	case PHY_INTERFACE_MODE_2500BASEX:
-		phylink_decode_c37_word(state, lpa, SPEED_2500);
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+			phylink_decode_c37_word(state, lpa, SPEED_2500);
+		} else {
+			state->speed = SPEED_2500;
+			state->duplex = DUPLEX_FULL;
+			state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
+		}
 		break;

Are the "else" branches necessary, given the "else" branch from phylink_mac_pcs_get_state?

static void phylink_mac_pcs_get_state(struct phylink *pl,
struct phylink_link_state *state)

{
	struct phylink_pcs *pcs;
	bool autoneg;

	linkmode_copy(state->advertising, pl->link_config.advertising);
	linkmode_zero(state->lp_advertising);
	state->interface = pl->link_config.interface;
	state->rate_matching = pl->link_config.rate_matching;
	state->an_complete = 0;
	state->link = 1;

	pcs = pl->pcs;
	if (!pcs || pcs->neg_mode)
		autoneg = pl->pcs_neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED;
	else
		autoneg = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
					    state->advertising);

	if (autoneg) {
		state->speed = SPEED_UNKNOWN;
		state->duplex = DUPLEX_UNKNOWN;
		state->pause = MLO_PAUSE_NONE;
	} else {						|
		state->speed =  pl->link_config.speed;		|
		state->duplex = pl->link_config.duplex;		| this
		state->pause = pl->link_config.pause;		|
	}							|

	if (pcs)
		pcs->ops->pcs_get_state(pcs, pl->pcs_neg_mode, state);
	else
		state->link = 0;
}
author maintainer
#7 lore raw

Re: [PATCH net-next v2 5/5] net: phylink: provide fixed state for 1000base-X and 2500base-X

Quoted 73 lines · Vladimir Oltean
Quoted 37 lines · Russell King (Oracle)

When decoding clause 22 state, if in-band is disabled and using either 1000base-X or 2500base-X, rather than reporting link-down, we know the speed, and we only support full duplex. Pause modes taken from XPCS.

This fixes a problem reported by Eric Woudstra.

---
 drivers/net/phy/phylink.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)
drivers/net/phy/phylink.c +7 -7
index b79f975bc164..ff0efb52189f 100644
@@ -3882,27 +3882,36 @@ void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state,
 	if (!state->link)
 		return;
 
-	/* If in-band is disabled, then the advertisement data is not
-	 * meaningful.
-	 */
-	if (neg_mode != PHYLINK_PCS_NEG_INBAND_ENABLED)
-		return;
-
 	switch (state->interface) {
 	case PHY_INTERFACE_MODE_1000BASEX:
-		phylink_decode_c37_word(state, lpa, SPEED_1000);
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+			phylink_decode_c37_word(state, lpa, SPEED_1000);
+		} else {
+			state->speed = SPEED_1000;
+			state->duplex = DUPLEX_FULL;
+			state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
+		}
 		break;
 

drivers/net/phy/phylink.c void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state, · line 3904

Quoted 10 lines
drivers/net/phy/phylink.c +7 -1
 	case PHY_INTERFACE_MODE_2500BASEX:
-		phylink_decode_c37_word(state, lpa, SPEED_2500);
+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+			phylink_decode_c37_word(state, lpa, SPEED_2500);
+		} else {
+			state->speed = SPEED_2500;
+			state->duplex = DUPLEX_FULL;
+			state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
+		}
 		break;

Are the "else" branches necessary, given the "else" branch from phylink_mac_pcs_get_state?

static void phylink_mac_pcs_get_state(struct phylink *pl,
struct phylink_link_state *state)

{
	struct phylink_pcs *pcs;
	bool autoneg;

	linkmode_copy(state->advertising, pl->link_config.advertising);
	linkmode_zero(state->lp_advertising);
	state->interface = pl->link_config.interface;
	state->rate_matching = pl->link_config.rate_matching;
	state->an_complete = 0;
	state->link = 1;

	pcs = pl->pcs;
	if (!pcs || pcs->neg_mode)
		autoneg = pl->pcs_neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED;
	else
		autoneg = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
					    state->advertising);

	if (autoneg) {
Quoted 8 lines
		state->speed = SPEED_UNKNOWN;
		state->duplex = DUPLEX_UNKNOWN;
		state->pause = MLO_PAUSE_NONE;
	} else {						|
		state->speed =  pl->link_config.speed;		|
		state->duplex = pl->link_config.duplex;		| this
		state->pause = pl->link_config.pause;		|
	}							|

This is fine for cases where ethtool is used to turn autoneg off, but not if we're in in-band mode and the PCS/PHY have decided to have autoneg off - in that case, nothing sets pl->link_config.* to anything sensible.

Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Reviewed-by Tested-by on the v2 series
#8 lore raw
In reply to Russell King (Oracle)

Hello Russell,

Quoted 37 lines · On Mon, 13 Jan 2025 09:22:15 +0000 "Russell King (Oracle)"…

Hi,

Eric Woudstra reported that a PCS attached using 2500base-X does not see link when phylink is using in-band mode, but autoneg is disabled, despite there being a valid 2500base-X signal being received. We have these settings:

act_link_an_mode = MLO_AN_INBAND pcs_neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED

Eric diagnosed it to phylink_decode_c37_word() setting state->link false because the full-duplex bit isn't set in the non-existent link partner advertisement word (which doesn't exist because in-band autoneg is disabled!)

The test in phylink_mii_c22_pcs_decode_state() is supposed to catch this state, but since we converted PCS to use neg_mode, testing the Autoneg in the local advertisement is no longer sufficient - we need to be looking at the neg_mode, which currently isn't provided.

We need to provide this via the .pcs_get_state() method, and this will require modifying all PCS implementations to add the extra argument to this method.

Patch 1 uses the PCS neg_mode in phylink_mac_pcs_get_state() to correct the now obsolute usage of the Autoneg bit in the advertisement.

Patch 2 passes neg_mode into the .pcs_get_state() method, and updates all users.

Patch 3 adds neg_mode as an argument to the various clause 22 state decoder functions in phylink, modifying drivers to pass the neg_mode through.

Patch 4 makes use of phylink_mii_c22_pcs_decode_state() rather than using the Autoneg bit in the advertising field.

Quoted 8 lines

Patch 5 may be required for Eric's case - it ensures that we report the correct state for interface types that we support only one set of modes for when autoneg is disabled.

Changes in v2:
- Add test for NULL pcs in patch 1

I haven't added Eric's t-b because I used a different fix in patch 1.

I stumbled on that issue last friday as well, with a MCBin and a device I'm working on, using 1000BaseX with autoneg disabled. I didn't get time to investigate back then, but reading this series it was definitely that exact problem I was facing.

I missed your V1 and I just tested that V2, the problem is gone :) Thanks !

The code LGTM to the best of my knowledge, so

Thanks,

Maxime

#9 lore raw
In reply to Russell King (Oracle)
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Quoted 8 lines · On Mon, 13 Jan 2025 09:22:15 +0000 you wrote:

Hi,

Eric Woudstra reported that a PCS attached using 2500base-X does not see link when phylink is using in-band mode, but autoneg is disabled, despite there being a valid 2500base-X signal being received. We have these settings:

[...]

Here is the summary with links:
- [net-next,v2,1/5] net: phylink: use pcs_neg_mode in phylink_mac_pcs_get_state()

    https://git.kernel.org/netdev/net-next/c/0f1396d24658
  - [net-next,v2,2/5] net: phylink: pass neg_mode into .pcs_get_state() method
    https://git.kernel.org/netdev/net-next/c/c6739623c91b
  - [net-next,v2,3/5] net: phylink: pass neg_mode into c22 state decoder
    https://git.kernel.org/netdev/net-next/c/7e3cb4e874ab
  - [net-next,v2,4/5] net: phylink: use neg_mode in phylink_mii_c22_pcs_decode_state()
    https://git.kernel.org/netdev/net-next/c/60a331fff5e8
  - [net-next,v2,5/5] net: phylink: provide fixed state for 1000base-X and 2500base-X
    https://git.kernel.org/netdev/net-next/c/e432ffc14b17

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html