i2c-for-6.14-rc1
The following changes since commit 9d89551994a430b50c4fffcb1e617a057fa76e20:
Linux 6.13-rc6 (2025-01-05 14:13:40 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git tags/i2c-for-6.14-rc1
for you to fetch changes up to 27c3f0e61f19d2306527406cad233d5f5915ca1e:
i2c: add kdoc for the new debugfs entry of clients (2025-01-15 22:04:06 +0100)
----------------------------------------------------------------
i2c-for-6.14-rc1
Core:
- list-based mechanisms for handling auto-detected and userspace created clients are replaced with a flag-based approach. The resulting code is much simpler as well as the locking.
- i2c clients now get a default debugfs dir managed by the I2C core. Drivers don't have to maintain their own directory anymore.
Drivers:
- xiic gains atomic_transfer support
- imx-lpi2c gains DMA and target mode support
- riic gets a collection of cleanups
- npcm gets a better timeout handling and more precise frequency setups
- davinci loses the unused platform_data
The rest is regular driver updates and improvements.
AT24:
- add new compatibles for at24 variants from Giantec and Puya Semiconductor (together with a new vendor prefix)
----------------------------------------------------------------
Andi Shyti (3):
i2c: nomadik: Enable compile testing for the Nomadik driver
i2c: qcom-geni: Use dev_err_probe in the probe function
i2c: qcom-geni: Simplify error handling in probe function
Atharva Tiwari (2):
i2c: amd756: Fix endianness handling for word data
i2c: amd756: Remove superfluous TODO
Bartosz Golaszewski (3):
i2c: davinci: kill platform data
i2c: davinci: order includes alphabetically
i2c: davinci: use generic device property accessors
Biju Das (1):
dt-bindings: i2c: renesas,riic: Document the R9A09G047 support
Bryan O'Donoghue (1):
dt-bindings: i2c: qcom-cci: Document x1e80100 compatible
Carlos Song (7):
i2c: imx: fix divide by zero warning
i2c: imx: make controller available until system suspend_noirq() and from resume_noirq()
i2c: imx: switch different pinctrl state in different system power status
i2c: imx: support DMA defer probing
i2c: imx-lpi2c: add eDMA mode support for LPI2C
i2c: imx-lpi2c: add target mode support
i2c: imx-lpi2c: make controller available until the system enters suspend_noirq() and from resume_noirq().
Charles Boyer (1):
i2c: npcm: Enable slave in eob interrupt
Chen Ni (1):
i2c: isch: Convert comma to semicolon
Geert Uytterhoeven (1):
i2c: I2C_BRCMSTB should not default to y when compile-testing
Heiner Kallweit (4):
ALSA: ppc: Remove i2c client removal hack
i2c: Replace list-based mechanism for handling auto-detected clients
i2c: Replace list-based mechanism for handling userspace-created clients
i2c: core: Allocate temp client on the stack in i2c_detect
Ivaylo Ivanov (2):
dt-bindings: i2c: exynos5: Add samsung,exynos8895-hsi2c compatible
i2c: exynos5: Add support for Exynos8895 SoC
Lad Prabhakar (9):
i2c: riic: Introduce a separate variable for IRQ
i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
i2c: riic: Use local dev pointer in dev_err_probe()
i2c: riic: Use BIT macro consistently
i2c: riic: Use GENMASK() macro for bitmask definitions
i2c: riic: Make use of devres helper to request deasserted reset line
i2c: riic: Mark riic_irqs array as const
i2c: riic: Use predefined macro and simplify clock tick calculation
i2c: riic: Add riic_bus_barrier() to check bus availability
Luca Weiss (3):
dt-bindings: eeprom: at24: Add compatible for Giantec GT24P128F
dt-bindings: vendor-prefixes: Add Puya Semiconductor (Shanghai) Co., Ltd.
dt-bindings: eeprom: at24: Add compatible for Puya P24C256C
Manikanta Guntupalli (2):
i2c: xiic: Relocate xiic_i2c_runtime_suspend and xiic_i2c_runtime_resume to facilitate atomic mode
i2c: xiic: Add atomic transfer support
Patrick Höhn (1):
i2c: i801: Add lis3lv02d for Dell Precision M6800
Philipp Stanner (1):
i2c: i801: Remove unnecessary PCI function call
Randolph Ha (1):
i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz
Thomas Weißschuh (1):
i2c: slave-eeprom: Constify 'struct bin_attribute'
Tyrone Ting (3):
i2c: npcm: Modify timeout evaluation mechanism
i2c: npcm: Assign client address earlier for i2c_recover_bus()
i2c: npcm: use i2c frequency table
Uwe Kleine-König (1):
i2c: designware: Actually make use of the I2C_DW_COMMON and I2C_DW symbol namespaces
Wolfram Sang (6):
i2c: keba: drop check because i2c_unregister_device() is NULL safe
Merge branch 'i2c/i2c-host' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow Revert "i2c: amd756: Fix endianness handling for word data"
Merge tag 'at24-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
i2c: add core-managed per-client directory in debugfs
i2c: add kdoc for the new debugfs entry of clients
with much appreciated quality assurance from
----------------------------------------------------------------
Andi Shyti (2):
(Rev.) i2c: davinci: use generic device property accessors (Rev.) i2c: davinci: order includes alphabetically
Andy Shevchenko (9):
(Rev.) i2c: riic: Add riic_bus_barrier() to check bus availability (Rev.) i2c: riic: Use predefined macro and simplify clock tick calculation (Rev.) i2c: riic: Mark riic_irqs array as const
(Rev.) i2c: riic: Make use of devres helper to request deasserted reset line (Rev.) i2c: riic: Use GENMASK() macro for bitmask definitions (Rev.) i2c: riic: Use BIT macro consistently
(Rev.) i2c: riic: Use local dev pointer in dev_err_probe() (Rev.) i2c: riic: Use dev_err_probe in probe and riic_init_hw functions (Rev.) i2c: riic: Introduce a separate variable for IRQ
Claudiu Beznea (14):
(Test) i2c: riic: Add riic_bus_barrier() to check bus availability (Rev.) i2c: riic: Add riic_bus_barrier() to check bus availability (Test) i2c: riic: Mark riic_irqs array as const
(Rev.) i2c: riic: Mark riic_irqs array as const
(Test) i2c: riic: Make use of devres helper to request deasserted reset line (Rev.) i2c: riic: Make use of devres helper to request deasserted reset line (Test) i2c: riic: Use GENMASK() macro for bitmask definitions (Rev.) i2c: riic: Use GENMASK() macro for bitmask definitions (Test) i2c: riic: Use BIT macro consistently
(Rev.) i2c: riic: Use BIT macro consistently
(Test) i2c: riic: Use local dev pointer in dev_err_probe() (Rev.) i2c: riic: Use local dev pointer in dev_err_probe() (Test) i2c: riic: Use dev_err_probe in probe and riic_init_hw functions (Rev.) i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
Frank Li (3):
(Rev.) i2c: imx: switch different pinctrl state in different system power status (Rev.) i2c: imx: make controller available until system suspend_noirq() and from resume_noirq() (Rev.) i2c: imx: fix divide by zero warning
Geert Uytterhoeven (10):
(Rev.) i2c: riic: Add riic_bus_barrier() to check bus availability (Rev.) i2c: riic: Use predefined macro and simplify clock tick calculation (Rev.) i2c: riic: Mark riic_irqs array as const
(Rev.) i2c: riic: Make use of devres helper to request deasserted reset line (Rev.) i2c: riic: Use GENMASK() macro for bitmask definitions (Rev.) i2c: riic: Use BIT macro consistently
(Rev.) i2c: riic: Use local dev pointer in dev_err_probe() (Rev.) i2c: riic: Use dev_err_probe in probe and riic_init_hw functions (Rev.) i2c: riic: Introduce a separate variable for IRQ
(Rev.) dt-bindings: i2c: renesas,riic: Document the R9A09G047 support
Guenter Roeck (1):
(Rev.) i2c: add core-managed per-client directory in debugfs
Krzysztof Kozlowski (2):
(Rev.) dt-bindings: i2c: qcom-cci: Document x1e80100 compatible (Rev.) dt-bindings: i2c: exynos5: Add samsung,exynos8895-hsi2c compatible
Mika Westerberg (1):
(Rev.) i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz
Takashi Iwai (1):
(Rev.) ALSA: ppc: Remove i2c client removal hack
Tali Perry (4):
(Rev.) i2c: npcm: Enable slave in eob interrupt
(Rev.) i2c: npcm: use i2c frequency table
(Rev.) i2c: npcm: Assign client address earlier for i2c_recover_bus() (Rev.) i2c: npcm: Modify timeout evaluation mechanism
Vladimir Zapolskiy (2):
(Rev.) i2c: qcom-geni: Simplify error handling in probe function (Rev.) i2c: qcom-geni: Use dev_err_probe in the probe function
Wolfram Sang (18):
(Rev.) i2c: riic: Add riic_bus_barrier() to check bus availability (Test) i2c: riic: Add riic_bus_barrier() to check bus availability (Test) i2c: riic: Use predefined macro and simplify clock tick calculation (Rev.) i2c: riic: Use predefined macro and simplify clock tick calculation (Test) i2c: riic: Mark riic_irqs array as const
(Rev.) i2c: riic: Mark riic_irqs array as const
(Test) i2c: riic: Make use of devres helper to request deasserted reset line (Rev.) i2c: riic: Make use of devres helper to request deasserted reset line (Rev.) i2c: riic: Use GENMASK() macro for bitmask definitions (Test) i2c: riic: Use GENMASK() macro for bitmask definitions (Rev.) i2c: riic: Use BIT macro consistently
(Test) i2c: riic: Use BIT macro consistently
(Rev.) i2c: riic: Use local dev pointer in dev_err_probe() (Test) i2c: riic: Use local dev pointer in dev_err_probe() (Rev.) i2c: riic: Use dev_err_probe in probe and riic_init_hw functions (Test) i2c: riic: Use dev_err_probe in probe and riic_init_hw functions (Rev.) i2c: riic: Introduce a separate variable for IRQ
(Test) i2c: riic: Introduce a separate variable for IRQ
Documentation/devicetree/bindings/eeprom/at24.yaml | 5 + .../devicetree/bindings/i2c/i2c-exynos5.yaml | 1 + .../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 + .../devicetree/bindings/i2c/renesas,riic.yaml | 5 +- .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/i2c/busses/Kconfig | 4 +- drivers/i2c/busses/i2c-amd756.c | 4 +- drivers/i2c/busses/i2c-davinci.c | 112 +-- drivers/i2c/busses/i2c-designware-common.c | 5 +- drivers/i2c/busses/i2c-designware-master.c | 5 +- drivers/i2c/busses/i2c-designware-slave.c | 5 +- drivers/i2c/busses/i2c-exynos5.c | 35 +- drivers/i2c/busses/i2c-i801.c | 8 +- drivers/i2c/busses/i2c-imx-lpi2c.c | 811 ++++++++++++++++++++- drivers/i2c/busses/i2c-imx.c | 99 ++- drivers/i2c/busses/i2c-isch.c | 6 +- drivers/i2c/busses/i2c-keba.c | 8 +- drivers/i2c/busses/i2c-npcm7xx.c | 427 ++++++++--- drivers/i2c/busses/i2c-qcom-geni.c | 56 +- drivers/i2c/busses/i2c-riic.c | 134 ++-- drivers/i2c/busses/i2c-xiic.c | 281 +++++-- drivers/i2c/i2c-core-acpi.c | 22 + drivers/i2c/i2c-core-base.c | 130 ++-- drivers/i2c/i2c-slave-eeprom.c | 8 +- include/linux/i2c.h | 13 +- include/linux/platform_data/i2c-davinci.h | 26 - sound/ppc/keywest.c | 7 +- 27 files changed, 1714 insertions(+), 507 deletions(-) delete mode 100644 include/linux/platform_data/i2c-davinci.h
The pull request you sent on Tue, 21 Jan 2025 23:14:42 +0100:
The pull request you sent on Tue, 21 Jan 2025 23:14:42 +0100:
Quoted 1 line
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.gittags/i2c-for-6.14-rc1
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/abdebb2837ffbf3187791e92b68a7d80eec0e773
Thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/prtracker.html